Documentation for "git fetch --depth" has been updated for clarity.
* ss/clone-depth-single-doc:
docs: clarify that --depth for git-fetch works with newly initialized repos
docs: say "commits" in the --depth option wording for git-clone
docs: clarify that passing --depth to git-clone implies --single-branch
The ignore mechanism saw a few regressions around untracked file
listing and sparse checkout selection areas in 2.7.0; the change
that is responsible for the regression has been reverted.
* nd/exclusion-regression-fix:
Revert "dir.c: don't exclude whole dir prematurely if neg pattern may match"
"git reflog" incorrectly assumed that all objects that used to be
at the tip of a ref must be commits, which caused it to segfault.
* dk/reflog-walk-with-non-commit:
reflog-walk: don't segfault on non-commit sha1's in the reflog
The documentation has been updated to hint the connection between
the '--signoff' option and DCO.
* dw/signoff-doc:
Expand documentation describing --signoff
A few unportable C construct have been spotted by clang compiler
and have been fixed.
* jk/clang-pedantic:
bswap: add NO_UNALIGNED_LOADS define
avoid shifting signed integers 31 bits
"git send-email" was confused by escaped quotes stored in the alias
files saved by "mutt", which has been corrected.
* ew/send-email-mutt-alias-fix:
git-send-email: do not double-escape quotes from mutt
Drop a few old "todo" items by deciding that the change one of them
suggests is not such a good idea, and doing the change the other
one suggested to do.
* ss/user-manual:
user-manual: add addition gitweb information
user-manual: add section documenting shallow clones
glossary: define the term shallow clone
user-manual: remove temporary branch entry from todo list
d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like
$GIT_DIR, 2015-06-26) attempted to work around a glitch in alias
handling by overwriting GIT_WORK_TREE environment variable to
affect subprocesses when set_git_work_tree() gets called, which
resulted in a rather unpleasant regression to "clone" and "init".
Try to address the same issue by always restoring the environment
and respawning the real underlying command when handling alias.
* nd/clear-gitenv-upon-use-of-alias:
run-command: don't warn on SIGPIPE deaths
git.c: make sure we do not leak GIT_* to alias scripts
setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when ..
git.c: make it clear save_env() is for alias handling only
Paths that have been told the index about with "add -N" are not
quite yet in the index, but a few commands behaved as if they
already are in a harmful way.
* nd/ita-cleanup:
grep: make it clear i-t-a entries are ignored
add and use a convenience macro ce_intent_to_add()
blame: remove obsolete comment
The "exclude_list" structure has the usual "alloc, nr" pair of
fields to be used by ALLOC_GROW(), but clear_exclude_list() forgot
to reset 'alloc' to 0 when it cleared 'nr'to discard the managed
array.
* nd/dir-exclude-cleanup:
dir.c: clean the entire struct in clear_exclude_list()
In-core storage of the reverse index for .pack files (which lets
you go from a pack offset to an object name) has been streamlined.
* jk/pack-revindex:
pack-revindex: store entries directly in packed_git
pack-revindex: drop hash table
Some "git notes" operations, e.g. "git log --notes=<note>", should
be able to read notes from any tree-ish that is shaped like a notes
tree, but the notes infrastructure required that the argument must
be a ref under refs/notes/. Loosen it to require a valid ref only
when the operation would update the notes (in which case we must
have a place to store the updated notes tree, iow, a ref).
* mh/notes-allow-reading-treeish:
notes: allow treeish expressions as notes ref
Commit 348d4f2 (filter-branch: skip index read/write when
possible, 2015-11-06) taught filter-branch to optimize out
the final "git write-tree" when we know we haven't touched
the tree with any of our filters. It does by simply putting
the literal text "$commit^{tree}" into the "$tree" variable,
avoiding a useless rev-parse call.
However, when we pass this to git_commit_non_empty_tree(),
it gets confused; it resolves "$commit^{tree}" itself, and
compares our string to the 40-hex sha1, which obviously
doesn't match. As a result, "--prune-empty" (or any custom
filter using git_commit_non_empty_tree) will fail to drop
an empty commit (when filter-branch is used without a tree
or index filter).
Let's resolve $tree to the 40-hex ourselves, so that
git_commit_non_empty_tree can work. Unfortunately, this is a
bit slower due to the extra process overhead:
$ cd t/perf && ./run 348d4f2 HEAD p7000-filter-branch.sh
[...]
Test 348d4f2 HEAD
--------------------------------------------------------------
7000.2: noop filter 3.76(0.24+0.26) 4.54(0.28+0.24) +20.7%
We could try to make git_commit_non_empty_tree more clever.
However, the value of $tree here is technically
user-visible. The user can provide arbitrary shell code at
this stage, which could itself have a similar assumption to
what is in git_commit_non_empty_tree. So the conservative
choice to fix this regression is to take the 20% hit and
give the pre-348d4f2 behavior. We still end up much faster
than before the optimization:
$ cd t/perf && ./run 348d4f2^ HEAD p7000-filter-branch.sh
[...]
Test 348d4f2^ HEAD
--------------------------------------------------------------
7000.2: noop filter 9.51(4.32+0.40) 4.51(0.28+0.23) -52.6%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f400e51c (test-lib.sh: set prerequisite SANITY by testing what we
really need, 2015-01-27) improved the way SANITY prerequisite was
determined, but made the resulting code (incorrectly) imply that
SANITY is all about effects of permission bits of the containing
directory has on the files contained in it by the comment it added,
its log message and the actual tests.
State what SANITY is about more clearly in the comment, and test
that a file whose permission bits says should be unreadble truly
cannot be read.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some Makefile dependencies to ensure an updated git-subtree
gets copied to the main area before testing begins.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it's useful to know the main branch of a git repository
without actually downloading the repository. This can be done by
looking at the symrefs stored in the remote repository. Currently git
doesn't provide a simple way to show the symrefs stored on the remote
repository, even though the information is available. Add a --symref
command line argument to the ls-remote command, which shows the symrefs
in the remote repository.
While there, replace a literal tab in the format string with \t to make
it more obvious to the reader.
Suggested-by: pedro rijo <pedrorijo91@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently ls-remote uses a hand rolled parser for its command line
arguments. Use the parse-options api instead of the hand rolled parser
to simplify the code and make it easier to add new arguments. In
addition this improves the help message.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git ls-remote takes an optional get-url argument, and specifying the
repository is optional. Fix the synopsis in the documentation to
reflect this.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --refs option was originally introduced in 2718ff0 ("Improve
git-peek-remote"). The ls-remote command was first documented in
972b6fe ("ls-remote: drop storing operation and add documentation."),
but the --refs option was never documented. Fix this.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cefb2a5e3 ("ls-remote: print URL when no repo is specified") added a
quiet option to ls-remote, but didn't add it to the documentation. Add
it.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git tries to avoid creating a commit with an empty author
name or email. However, commits created by older, less
strict versions of git may still be in the history. There's
not much point in issuing a warning to stderr for an empty
author. The user can't do anything about it now, and we are
better off to simply include it in the shortlog output as an
empty name/email, and let the caller process it however they
see fit.
Older versions of shortlog differentiated between "author
header not present" (which complained) and "author
name/email are blank" (which included the empty ident in the
output). But since switching to format_commit_message, we
complain to stderr about either case (linux.git has a blank
author deep in its history which triggers this).
We could try to restore the older behavior (complaining only
about the missing header), but in retrospect, there's not
much point in differentiating these cases. A missing
author header is bogus, but as for the "blank" case, the
only useful behavior is to add it to the "empty name"
collection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in "--summary" mode, then we do not care about the
actual list of subject onelines associated with each author.
We care only about the number. So rather than store a
string-list for each author full of "<none>", let's just
keep a count.
This drops my best-of-five for "git shortlog -ns HEAD" on
linux.git from:
real 0m5.194s
user 0m5.028s
sys 0m0.168s
to:
real 0m5.057s
user 0m4.916s
sys 0m0.144s
That's about 2.5%.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are in --summary mode, we will always pass <none> to
insert_one_record, which will then do some normalization
(e.g., cutting out "[PATCH]"). There's no point in doing so
if we aren't going to use the result anyway.
This drops my best-of-five for "git shortlog -ns HEAD" on
linux.git from:
real 0m5.257s
user 0m5.104s
sys 0m0.156s
to:
real 0m5.194s
user 0m5.028s
sys 0m0.168s
That's only 1%, but arguably the result is clearer to read,
as we're able to group our variable declarations inside the
conditional block. It also opens up further optimization
possibilities for future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user asked us only to show counts for each author,
rather than the individual summary lines, then there is no
point in us generating the summaries only to throw them
away. With this patch, I measured the following speedup for
"git shortlog -ns HEAD" on linux.git (best-of-five):
[before]
real 0m5.644s
user 0m5.472s
sys 0m0.176s
[after]
real 0m5.257s
user 0m5.104s
sys 0m0.156s
That's only ~7%, but it's so easy to do, there's no good
reason not to. We don't have to touch any downstream code,
since we already fill in the magic string "<none>" to handle
commits without a message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When gathering the author and oneline subject for each
commit, we hand-parse the commit headers to find the
"author" line, and then continue past to the blank line at
the end of the header.
We can replace this tricky hand-parsing by simply asking the
pretty-printer for the relevant items. This also decouples
the author and oneline parsing, opening up some new
optimizations in further commits.
One reason to avoid the pretty-printer is that it might be
less efficient than hand-parsing. However, I measured no
slowdown at all running "git shortlog -ns HEAD" on
linux.git.
As a bonus, we also fix a memory leak in the (uncommon) case
that the author field is blank.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use fixed-size buffers with fgets(), which
could lead to incorrect results in the unlikely event that a
line had something like "Author:" at exactly its 1024th
character.
But it's easy to convert this to a strbuf, and because we
can reuse the same buffer through the loop, we don't even
pay the extra allocation cost.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shortlog could read both the normal "git
log" output as well as "git log --format=raw". However, when
it was converted to C by b8ec592 (Build in shortlog,
2006-10-22), the trailing colon became mandatory, and we no
longer matched the raw output.
Given the amount of intervening time without any bug
reports, it's probable that nobody cares. But it's
relatively easy to fix, and the end result is hopefully more
readable than the original.
Note that this no longer matches "author: ", which we did
before, but that has never been a format generated by git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in a cross-platform environment, a user may want to
check if text files are stored normalized in the repository and
if .gitattributes are set appropriately.
Make it possible to let Git show the line endings in the index and
in the working tree and the effective text/eol attributes.
The end of line ("eolinfo") are shown like this:
"-text" binary (or with bare CR) file
"none" text file without any EOL
"lf" text file with LF
"crlf" text file with CRLF
"mixed" text file with mixed line endings.
The effective text/eol attribute is one of these:
"", "-text", "text", "text=auto", "text eol=lf", "text eol=crlf"
git ls-files --eol gives an output like this:
i/none w/none attr/text=auto t/t5100/empty
i/-text w/-text attr/-text t/test-binary-2.png
i/lf w/lf attr/text eol=lf t/t5100/rfc2047-info-0007
i/lf w/crlf attr/text eol=crlf doit.bat
i/mixed w/mixed attr/ locale/XX.po
to show what eol convention is used in the data in the index ('i'),
and in the working tree ('w'), and what attribute is in effect,
for each path that is shown.
Add test cases in t0027.
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new expansion function, expand_loose_notes_ref which will first
check whether the ref can be found using get_sha1. If it can't be found
then it will fallback to using expand_notes_ref. The content of the
strbuf will not be changed if the notes ref can be located using
get_sha1. Otherwise, it may be updated as done by expand_notes_ref.
Since we now support merging from non-notes refs, remove the test case
associated with that behavior. Add a test case for merging from a
non-notes ref.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the result of a (a, 0) expression is not used, MSys2's GCC version
finds it necessary to complain with a warning:
right-hand operand of comma expression has no effect
Let's just pretend to use the 0 value and have a peaceful and quiet life
again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSys2's compiler is correct that casting a "void *" to a "DWORD" loses
precision, but in the case of pthread_exit() we know that the value
fits into a DWORD.
Just like casting handles to DWORDs, let's work around this issue by
casting to "intrptr_t" first, and immediately cast to the final type.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HANDLE is defined internally as a void *, but in many cases it is
actually guaranteed to be a 32-bit integer. In these cases, GCC should
not warn about a cast of a pointer to an integer of a different type
because we know exactly what we are doing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with MSys2's compiler, these constants are already defined.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The input to this command comes from a pipeline in t0064, whose
upstream has bunch of "echo"s. It is not unreasonable to expect
that it may be fed CRLF lines on DOSsy systems.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
List of patterns file could come from a DOS editor.
This is iffy; you may actually be trying to find a line with ^M in
it on a system whose line ending is LF. You can of course work it
around by having a line that has "^M^M^J", let the strbuf_getline()
eat the last "^M^J", leaving just the single "^M" as the pattern.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple lines read here are concatenated on a single line to form a
multi-column output line. We do not want to have a CR at the end,
even if the input file consists of CRLF terminated lines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to prepare a text file with a DOS editor and feed it
as a batch command stream to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our implementation of helpers never use CRLF line endings, and they
do not depend on the ability to place a CR as payload at the end of
the line, so this is essentially a no-op for in-tree users. However,
this allows third-party implementation of helpers to give us their
line with CRLF line ending (they cannot expect us to feed CRLF to
them, though).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$GIT_OBJECT_DIRECTORY/info/alternates is a text file that can be
edited with a DOS editor. We do not want to use the real path with
CR appended at the end.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These files can be edited with a DOS editor, leaving CR at the end
of the line if read with strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just in case /etc/mailname file was edited with a DOS editor,
read it with strbuf_getline() so that a stray CR is not included
as the last character of the mail hostname.
We _might_ want to more aggressively discard whitespace characters
around the line with strbuf_trim(), but that is a bit outside the
scope of this series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rev-parse --parseopt" specification is clearly text and we
should anticipate that we may be fed CRLF lines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reading with getwholeline() and manually stripping the terminating
'\n' would leave CR at the end of the line if the input comes from
a DOS editor.
Constrasting this with the other changes around "--stdin" in this
series, one may realize that the way "log" family of commands read
the paths with "--stdin" looks inconsistent and sloppy. It does not
allow us to C-quote a textual input, neither does it accept records
that are NUL-terminated. These are unfortunately way too late to
fix X-<.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now there is no direct caller to strbuf_getline(), we can demote it
to file-scope static that is private to strbuf.c and rename it to
strbuf_getdelim(). Rename strbuf_getline_crlf(), which is designed
to be the most "text friendly" variant, and allow it to take over
this simplest name, strbuf_getline(), so we can add more uses of it
without having to type _crlf over and over again in the coming
steps.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The program by default reads LF terminated lines, with an option to
use NUL terminated records. Instead of pretending that there can be
other useful values for line_termination, use a boolean variable,
nul_term_line, to tell if NUL terminated records are used, and
switch between strbuf_getline_{lf,nul} based on it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
