If we see an empty name, we complain about and mention the
matching email in the error message (to give it some
context). However, the "email" pointer may be NULL here if
we were planning to fill it in later from ident_default_email().
This was broken by 59f929596 (fmt_ident: refactor strictness
checks, 2016-02-04). Prior to that commit, we would look up
the default name and email before doing any other actions.
So one solution would be to go back to that.
However, we can't just do so blindly. The logic for handling
the "!email" condition has grown since then. In particular,
looking up the default email can die if getpwuid() fails,
but there are other errors that should take precedence.
Commit 734c7789a (ident: check for useConfigOnly before
auto-detection of name/email, 2016-03-30) reordered the
checks so that we prefer the error message for
useConfigOnly.
Instead, we can observe that while the name-handling depends
on "email" being set, the reverse is not true. So we can
simply set up the email variable first.
This does mean that if both are bogus, we'll complain about
the email before the name. But between the two, there is no
reason to prefer one over the other.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not all too unusual for a branch to use "branch.<name>.remote"
without "branch.<name>.merge". You may be using the 'push.default'
configuration set to 'current', for example, and do
$ git checkout -b side colleague/side
$ git config branch.side.remote colleague
However, "git remote rm" to remove the remote used in such a manner
fails with
"fatal: could not unset 'branch.<name>.merge'"
because it assumes that a branch that has .remote defined must also
have .merge defined. Detect the "cannot unset because it is not set
to begin with" case and ignore it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Renaming the current branch adds an event to the current branch's log
and to HEAD's log. However, the logged entries differ. The entry in
the branch's log represents the entire renaming operation (the old and
new hash are identical), whereas the entry in HEAD's log represents
the deletion only (the new sha1 is null).
Extend replace_each_worktree_head_symref(), whose only caller is
branch_rename(), to take a reflog message argument. This allows the
creation of the new ref to be recorded in HEAD's log. As a result,
the renaming event is represented by two entries (a deletion and a
creation entry) in HEAD's log.
It's a bit unfortunate that the branch's log and HEAD's log now
represent the renaming event in different ways. Given that the
renaming operation is not atomic, the two-entry form is a more
accurate representation of the operation and is more useful for
debugging purposes if a failure occurs between the deletion and
creation events. It would make sense to move the branch's log to the
two-entry form, but this would involve changes to how the rename is
carried out and to how the update flags and reflogs are processed for
deletions, so it may not be worth the effort.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the current branch is renamed, the deletion of the old ref is
recorded in HEAD's log with an empty message. Now that delete_ref()
accepts a reflog message, provide a more descriptive message by
passing along the log message that is given to rename_ref().
The next step will be to extend HEAD's log to also include the second
part of the rename, the creation of the new branch.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that delete_ref() accepts a reflog message, pass the user-provided
message to delete_ref() rather than silently dropping it.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently there is no test showing the expected behaviour of git stash
create's command line arguments. Add a test for that to show the
current expected behaviour and to make sure future refactorings don't
break those expectations.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new git stash push verb in addition to git stash save. The
push verb is used to transition from the current command line arguments
to a more conventional way, in which the message is given as an argument
to the -m option.
This allows us to have pathspecs at the end of the command line
arguments like other Git commands do, so that the user can say which
subset of paths to stash (and leave others behind).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to making git_path() aware of certain file names that need
to be handled differently e.g. when running in worktrees, the commit
557bd833bb (git_path(): be aware of file relocation in $GIT_DIR,
2014-11-30) also snuck in a new option for `git rev-parse`:
`--git-path`.
On the face of it, there is no obvious bug in that commit's diff: it
faithfully calls git_path() on the argument and prints it out, i.e. `git
rev-parse --git-path <filename>` has the same precise behavior as
calling `git_path("<filename>")` in C.
The problem lies deeper, much deeper. In hindsight (which is always
unfair), implementing the .git/ directory discovery in
`setup_git_directory()` by changing the working directory may have
allowed us to avoid passing around a struct that contains information
about the current repository, but it bought us many, many problems.
In this case, when being called in a subdirectory, `git rev-parse`
changes the working directory to the top-level directory before calling
`git_path()`. In the new working directory, the result is correct. But
in the working directory of the calling script, it is incorrect.
Example: when calling `git rev-parse --git-path HEAD` in, say, the
Documentation/ subdirectory of Git's own source code, the string
`.git/HEAD` is printed.
Side note: that bug is hidden when running in a subdirectory of a
worktree that was added by the `git worktree` command: in that case, the
(correct) absolute path of the `HEAD` file is printed.
In the interest of time, this patch does not go the "correct" route to
introduce a struct with repository information (and removing global
state in the process), instead this patch chooses to detect when the
command was called in a subdirectory and forces the result to be an
absolute path.
While at it, we are also fixing the output of --git-common-dir and
--shared-index-path.
Lastly, please note that we reuse the same strbuf for all of the
relative_path() calls; this avoids frequent allocation (and duplicated
code), and it does not risk memory leaks, for two reasons: 1) the
cmd_rev_parse() function does not return anywhere between the use of
the new strbuf instance and its final release, and 2) git-rev-parse is
one of these "one-shot" programs in Git, i.e. it exits after running
for a very short time, meaning that all allocated memory is released
with the exit() call anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t2027-worktree-list has an incorrect expectation for --git-common-dir
which has been adjusted and marked to expect failure.
Some of the tests added have been marked to expect failure. These
demonstrate a problem with the way that some options to git rev-parse
behave when executed from a subdirectory of the main worktree.
[jes: fixed incorrect assumption that objects/ lives in the
worktree-specific git-dir (it lives in the common dir instead). Also
adjusted t1700 so that the test case does not *need* to be the last
one in that script.]
Signed-off-by: Michael Rappazzo <rappazzo@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git p4" imports changelist that removes paths, it failed to
convert pathnames when the p4 used encoding different from the one
used on the Git side. This has been corrected.
* ls/p4-path-encoding:
git-p4: fix git-p4.pathEncoding for removed files
The push-options given via the "--push-options" option were not
passed through to external remote helpers such as "smart HTTP" that
are invoked via the transport helper.
* sb/push-options-via-transport:
push options: pass push options to the transport helper
git-grep has always disallowed grepping in a tree (as
opposed to the working directory) with both --untracked
and --no-index. But we traditionally did so by first
collecting the revs, and then complaining when any were
provided.
The --no-index option recently learned to detect revs
much earlier. This has two user-visible effects:
- we don't bother to resolve revision names at all. So
when there's a rev/path ambiguity, we always choose to
treat it as a path.
- likewise, when you do specify a revision without "--",
the error you get is "no such path" and not "--untracked
cannot be used with revs".
The rationale for doing this with --no-index is that it is
meant to be used outside a repository, and so parsing revs
at all does not make sense.
This patch gives --untracked the same treatment. While it
_is_ meant to be used in a repository, it is explicitly
about grepping the non-repository contents. Telling the user
"we found a rev, but you are not allowed to use revs" is
not really helpful compared to "we treated your argument as
a path, and could not find it".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To push from or fetch to the current repository, remote helpers need
to know what repository that is. Accordingly, Git sets the GIT_DIR
environment variable to the path to the current repository when
invoking remote helpers.
There is a special case it does not handle: "git ls-remote" and "git
archive --remote" can be run to inspect a remote repository without
being run from any local repository. GIT_DIR is not useful in this
scenario:
- if we are not in a repository, we don't need to set GIT_DIR to
override an existing GIT_DIR value from the environment. If GIT_DIR
is present then we would be in a repository if it were valid and
would have called die() if it weren't.
- not setting GIT_DIR may cause a helper to do the usual discovery
walk to find the repository. But we know we're not in one, or we
would have found it ourselves. So in the worst case it may expend
a little extra effort to try to find a repository and fail (for
example, remote-curl would do this to try to find repository-level
configuration).
So leave GIT_DIR unset in this case. This makes GIT_DIR easier to
understand for remote helper authors and makes transport code less of
a special case for repository discovery.
Noticed using b1ef400e (setup_git_env: avoid blind fall-back to
".git", 2016-10-20) from 'next':
$ cd /tmp
$ git ls-remote https://kernel.googlesource.com/pub/scm/git/git
fatal: BUG: setup_git_env called without repository
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git ls-remote" command can be run outside of a
repository, but needs to look up configured remotes. The
config code is smart enough to handle this case itself, but
we also check the historical "branches" and "remotes" paths
in $GIT_DIR. The git_path() function causes us to blindly
look at ".git/remotes", even if we know we aren't in a git
repository.
For now, this is just an unlikely bug (you probably don't
have such a file if you're not in a repository), but it will
become more obvious once we merge b1ef400ee (setup_git_env:
avoid blind fall-back to ".git", 2016-10-20):
[now]
$ git ls-remote
fatal: No remote configured to list refs from.
[with b1ef400ee]
$ git ls-remote
fatal: BUG: setup_git_env called without repository
We can fix this by skipping these sources entirely when
we're outside of a repository.
The test is a little more complex than the demonstration
above. Rather than detect the correct behavior by parsing
the error message, we can actually set up a case where the
remote name we give is a valid repository, but b1ef400ee
would cause us to die in the configuration step.
This test doesn't fail now, but it future-proofs us for the
b1ef400ee change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are using --no-index, then our arguments cannot be
revs in the first place. Not only is it pointless to
diagnose them, but if we are not in a repository, we should
not be trying to resolve any names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We disallow the use of revisions with --no-index, but we
don't actually check and complain until well after we've
parsed the revisions.
This is the cause of a few problems:
1. We shouldn't be calling get_sha1() at all when we aren't
in a repository, as it might access the ref or object
databases. For now, this should generally just return
failure, but eventually it will become a BUG().
2. When there's a "--" disambiguator and you're outside a
repository, we'll complain early with "unable to resolve
revision". But we can give a much more specific error.
3. When there isn't a "--" disambiguator, we still do the
normal rev/path checks. This is silly, as we know we
cannot have any revs with --no-index. Everything we see
must be a path.
Outside of a repository this doesn't matter (since we
know it won't resolve), but inside one, we may complain
unnecessarily if a filename happens to also match a
refname.
This patch skips the get_sha1() call entirely in the
no-index case, and behaves as if it failed (with the
exception of giving a better error message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we see "git grep pattern rev -- file" then we apply the
usual rev/pathspec disambiguation rules: any "rev" before
the "--" must be a revision, and we do not need to apply the
verify_non_filename() check.
But there are two bugs here:
1. We keep a seen_dashdash flag to handle this case, but
we set it in the same left-to-right pass over the
arguments in which we parse "rev".
So when we see "rev", we do not yet know that there is
a "--", and we mistakenly complain if there is a
matching file.
We can fix this by making a preliminary pass over the
arguments to find the "--", and only then checking the rev
arguments.
2. If we can't resolve "rev" but there isn't a dashdash,
that's OK. We treat it like a path, and complain later
if it doesn't exist.
But if there _is_ a dashdash, then we know it must be a
rev, and should treat it as such, complaining if it
does not resolve. The current code instead ignores it
and tries to treat it like a path.
This patch fixes both bugs, and tries to comment the parsing
flow a bit better.
It adds tests that cover the two bugs, but also some related
situations (which already worked, but this confirms that our
fixes did not break anything).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command of the form
git grep --no-index pattern -- path
in the absence of a Git repository, an error message will be printed:
fatal: BUG: setup_git_env called without repository
This is because "git grep" tries to interpret "--" as a rev. "git grep"
has always tried to first interpret "--" as a rev for at least a few
years, but this issue was upgraded from a pessimization to a bug in
commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which
calls get_sha1 regardless of whether --no-index was specified. This bug
appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20) when Git was taught to die in this
situation. (This "git grep" bug appears to be one of the bugs that
commit b1ef400 is meant to flush out.)
Therefore, always interpret "--" as signaling the end of options,
instead of trying to interpret it as a rev first.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A server can end up in a state where there are lots of unreferenced
loose objects (say, because many users are doing a bunch of rebasing
and pushing their rebased branches). Running "git gc --auto" in
this state would cause a gc.log file to be created, preventing
future auto gcs, causing pack files to pile up. Since many git
operations are O(n) in the number of pack files, this would lead to
poor performance.
Git should never get itself into a state where it refuses to do any
maintenance, just because at some point some piece of the maintenance
didn't make progress.
Teach Git to ignore gc.log files which are older than (by default)
one day old, which can be tweaked via the gc.logExpiry configuration
variable. That way, these pack files will get cleaned up, if
necessary, at least once per day. And operators who find a need for
more-frequent gcs can adjust gc.logExpiry to meet their needs.
There is also some cleanup: a successful manual gc, or a
warning-free auto gc with an old log file, will remove any old
gc.log files.
It might still happen that manual intervention is required
(e.g. because the repo is corrupt), but at the very least it won't
be because Git is too dumb to try again.
Signed-off-by: David Turner <dturner@twosigma.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a9e38359e3 we taught git-p4 a way to re-encode path names from what
was used in Perforce to UTF-8. This path re-encoding worked properly for
"added" paths. "Removed" paths were not re-encoded and therefore
different from the "added" paths. Consequently, these files were not
removed in a git-p4 cloned Git repository because the path names did not
match.
Fix this by moving the re-encoding to a place that affects "added" and
"removed" paths. Add a test to demonstrate the issue.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of erroring out and telling the user that they should add a
positive pattern that covers everything else, just _do_ that.
For commands where we honor the current cwd by default (ie grep, ls-files
etc), we make that default positive pathspec be the current working
directory. And for commands that default to the whole project (ie diff,
log, etc), the default positive pathspec is the whole project.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph" did not work well with "--name-only", even though
other forms of "diff" output were handled correctly.
* jk/log-graph-name-only:
diff: print line prefix for --name-only output
Adjust a perf test to new world order where commands that do
require a repository are really strict about having a repository.
* rs/p5302-create-repositories-before-tests:
p5302: create repositories for index-pack results explicitly
Now that the sequencer learned to process a "normal" interactive rebase,
we use it. The original shell script is still used for "non-normal"
interactive rebases, i.e. when --root or --preserve-merges was passed.
Please note that the --root option (via the $squash_onto variable) needs
special handling only for the very first command, hence it is still okay
to use the helper upon continue/skip.
Also please note that the --no-ff setting is volatile, i.e. when the
interactive rebase is interrupted at any stage, there is no record of
it. Therefore, we have to pass it from the shell script to the
rebase--helper.
Note: the test t3404 had to be adjusted because the the error messages
produced by the sequencer comply with our current convention to start with
a lower-case letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using non-builtin protocols relying on a transport helper
(such as http), push options are not propagated to the helper.
The user could ask for push options and a push would seemingly succeed,
but the push options would never be transported to the server,
misleading the users expectation.
Fix this by propagating the push options to the transport helper.
This is only addressing the first issue of
(1) the helper protocol does not propagate push-option
(2) the http helper is not prepared to handle push-option
Once we fix (2), the http transport helper can make use of push options
as well, but that happens as a follow up. (1) is a bug fix, whereas (2)
is a feature, which is why we only do (1) here.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tags are created with `--create-reflog` or with the option
`core.logAllRefUpdates` set to 'always', a reflog is created for them.
So far, the description of reflog entries for tags was empty, making the
reflog hard to understand. For example:
6e3a7b3 refs/tags/test@{0}:
Now, a reflog message is generated when creating a tag, following the
pattern "tag: tagging <short-sha1> (<description>)". If
GIT_REFLOG_ACTION is set, the message becomes "$GIT_REFLOG_ACTION
(<description>)" instead. If the tag references a commit object, the
description is set to the subject line of the commit, followed by its
commit date. For example:
6e3a7b3 refs/tags/test@{0}: tag: tagging 6e3a7b3398 (Git 2.12-rc0, 2017-02-03)
If the tag points to a tree/blob/tag objects, the following static
strings are taken as description:
- "tree object"
- "blob object"
- "other tag object"
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We de-duplicate ".have" refs among themselves, but never
check if they are duplicates of our local refs. It's not
unreasonable that they would be if we are a "--shared" or
"--reference" clone of a similar repository; we'd have all
the same tags.
We can handle this by inserting our local refs into the
oidset, but obviously not suppressing duplicates (since the
refnames are important).
Note that this also switches the order in which we advertise
refs, processing ours first and then any alternates. The
order shouldn't matter (and arguably showing our refs first
makes more sense).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run "git log --graph --name-only", the pathnames are
not indented to go along with their matching commits (unlike
all of the other diff formats). We need to output the line
prefix for each item before writing it.
The tests cover both --name-status and --name-only. The
former actually gets this right already, because it builds
on the --raw format functions. It's only --name-only which
uses its own code (and this fix mirrors the code in
diff_flush_raw()).
Note that the tests don't follow our usual style of setting
up the "expect" output inside the test block. This matches
the surrounding style, but more importantly it is easier to
read: we don't have to worry about embedded single-quotes,
and the leading indentation is more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make t7800 easier to debug by capturing output into temporary files and
using test_line_count to make assertions on those files.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "test_line_count" instead of "wc -l", use "git -C" instead of a
subshell, and use test_expect_code when calling difftool. Ease
debugging by capturing output into temporary files.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot that "strip" was introduced at 0571979bd6 ("tag: do not
show ambiguous tag names as "tags/foo"", 2016-01-25) as part of Git
2.8 (and 2.7.1) when we started calling this "lstrip" to make it
easier to explain the new "rstrip" operation.
We shouldn't have renamed the existing one; "lstrip" should have
been a new synonym that means the same thing as "strip". Scripts
in the wild are surely using the original form already.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 7176a314 (index-pack: complain when --stdin is used outside of a
repo) index-pack silently created a non-existing target directory; now
the command refuses to work unless it's used against a valid repository.
That causes p5302 to fail, which relies on the former behavior. Fix it
by setting up the destinations for its performance tests using git init.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool -h" reports an error:
fatal: BUG: setup_git_env called without repository
Defer repository setup so that the help option processing happens before
the repository is initialized.
Add tests to ensure that the basic usage works inside and outside of a
repository.
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the previous changes in this series there are only a handful of
$(__gitdir) command substitutions left in the completion script, but
there is still a bit of room for improvements:
1. The command substitution involves the forking of a subshell,
which has considerable overhead on some platforms.
2. There are a few cases, where this command substitution is
executed more than once during a single completion, which means
multiple subshells and possibly multiple 'git rev-parse'
executions. __gitdir() is invoked twice while completing refs
for e.g. 'git log', 'git rebase', 'gitk', or while completing
remote refs for 'git fetch' or 'git push'.
Both of these points can be addressed by using the
__git_find_repo_path() helper function introduced in the previous
commit:
1. __git_find_repo_path() stores the path to the repository in a
variable instead of printing it, so the command substitution
around the function can be avoided. Or rather: the command
substitution should be avoided to make the new value of the
variable set inside the function visible to the callers.
(Yes, there is now a command substitution inside
__git_find_repo_path() around each 'git rev-parse', but that's
executed only if necessary, and only once per completion, see
point 2. below.)
2. $__git_repo_path, the variable holding the path to the
repository, is declared local in the toplevel completion
functions __git_main() and __gitk_main(). Thus, once set, the
path is visible in all completion functions, including all
subsequent calls to __git_find_repo_path(), meaning that they
wouldn't have to re-discover the path to the repository.
So call __git_find_repo_path() and use $__git_repo_path instead of the
$(__gitdir) command substitution to access paths in the .git
directory. Turn tests checking __gitdir()'s repository discovery into
tests of __git_find_repo_path() such that only the tested function
changes but the expected results don't, ensuring that repo discovery
keeps working as it did before.
As __gitdir() is not used anymore in the completion script, mark it as
deprecated and direct users' attention to __git_find_repo_path() and
$__git_repo_path. Yet keep four __gitdir() tests to ensure that it
handles success and failure of __git_find_repo_path() and that it
still handles its optional remote argument, because users' custom
completion scriptlets might depend on it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To prepare for caching the path to the repository in the following
commit, extract the repository discovering part of __gitdir() into the
__git_find_repo_path() helper function, which stores the found path in
the $__git_repo_path variable instead of printing it. Make __gitdir()
a wrapper around this new function. Declare $__git_repo_path local in
the toplevel completion functions __git_main() and __gitk_main() to
ensure that it never leaks into the environment and influences
subsequent completions (though this isn't necessary right now, as
__gitdir() is still only executed in subshells, but will matter for
the following commit).
Adjust tests checking __gitdir() or any other completion function
calling __gitdir() to perform those checks in a subshell to prevent
$__git_repo_path from leaking into the test environment. Otherwise
leave the tests unchanged to demonstrate that this change doesn't
alter __gitdir()'s behavior.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git -C <path>' option(s) on the command line should be taken into
account during completion, because
- like '--git-dir=<path>', it can lead us to a different repository,
- a few git commands executed in the completion script do care about
in which directory they are executed, and
- the command for which we are providing completion might care about
in which directory it will be executed.
However, unlike '--git-dir=<path>', the '-C <path>' option can be
specified multiple times and their effect is cumulative, so we can't
just store a single '<path>' in a variable. Nor can we simply
concatenate a path from '-C <path1> -C <path2> ...', because e.g. (in
an arguably pathological corner case) a relative path might be
followed by an absolute path.
Instead, store all '-C <path>' options word by word in the
$__git_C_args array in the main git completion function, and pass this
array, if present, to 'git rev-parse --absolute-git-dir' when
discovering the repository in __gitdir(), and let it take care of
multiple options, relative paths, absolute paths and everything.
Also pass all '-C <path> options via the $__git_C_args array to those
git executions which require a worktree and for which it matters from
which directory they are executed from. There are only three such
cases:
- 'git diff-index' and 'git ls-files' in __git_ls_files_helper()
used for git-aware filename completion, and
- the 'git ls-tree' used for completing the 'ref:path' notation.
The other git commands executed in the completion script don't need
these '-C <path>' options, because __gitdir() already took those
options into account. It would not hurt them, either, but let's not
induce unnecessary code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of 'git rev-parse --git-dir' can be either a relative or an
absolute path, depending on whether the current working directory is
at the top of the worktree or the .git directory or not, or how the
path to the repository is specified via the '--git-dir=<path>' option
or the $GIT_DIR environment variable. And if that output is a
relative path, then it is relative to the directory where any 'git
-C <path>' options might have led us.
This doesn't matter at all for regular scripts, because the git
wrapper automatically takes care of changing directories according to
the '-C <path>' options, and the scripts can then simply follow any
path returned by 'git rev-parse --git-dir', even if it's a relative
path.
Our Bash completion script, however, is unique in that it must run
directly in the user's interactive shell environment. This means that
it's not executed through the git wrapper and would have to take care
of any '-C <path> options on its own, and it can't just change
directories as it pleases. Consequently, adding support for taking
any '-C <path>' options on the command line into account during
completion turned out to be considerably more difficult, error prone
and required more subshells and git processes when it had to cope with
a relative path to the .git directory.
Help this rather special use case and teach 'git rev-parse' a new
'--absolute-git-dir' option which always outputs a canonicalized
absolute path to the .git directory, regardless of whether the path is
discovered automatically or is specified via $GIT_DIR or 'git
--git-dir=<path>'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main completion function finds the name of the git command by
iterating through all the words on the command line in search for the
first non-option-looking word. As it is not aware of 'git -C's
mandatory path argument, if the '-C <path>' option is present, 'path'
will be the first such word and it will be mistaken for a git command.
This breaks completion in various ways:
- If 'path' happens to match one of the commands supported by the
completion script, then options of that command will be offered.
- If 'path' doesn't match a supported command and doesn't contain any
characters not allowed in Bash identifier names, then the
completion script does basically nothing and Bash in turn falls
back to filename completion for all subsequent words.
- Otherwise, if 'path' does contain such an unallowed character, then
it leads to a more or less ugly error message in the middle of the
command line. The standard '/' directory separator is such a
character, and it happens to trigger one of the uglier errors:
$ git -C some/path <TAB>sh.exe": declare: `_git_some/path': not a valid identifier
error: invalid key: alias.some/path
Fix this by skipping 'git -C's mandatory path argument while iterating
over the words on the command line. Extend the relevant test with
this case and, while at it, with cases that needed similar treatment
in the past ('--git-dir', '-c', '--work-tree' and '--namespace').
Additionally, silence the standard error of the 'declare' builtins
looking for the completion function associated with the git command
and of the 'git config' query for the aliased command. So if git ever
learns a new option with a mandatory argument in the future, then,
though the completion script will again misbehave, at least the
command line will not be utterly disrupted by those error messages.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e832f5c096 (completion: avoid ls-remote in certain scenarios,
2013-05-28) turned a 'git ls-remote <remote>' query into a 'git
for-each-ref refs/remotes/<remote>/' to improve responsiveness of
remote refs completion by avoiding potential network communication.
However, it inadvertently made impossible to complete short refs from
a remote given as a URL, e.g. 'git fetch git://server.com/repo.git
<TAB>', because there is, of course, no such thing as
'refs/remotes/git://server.com/repo.git'.
Since the previous commit we tell apart configured remotes, i.e. those
that can have a hierarchy under 'refs/remotes/', from others that
don't, including remotes given as URL, so we know when we can't use
the faster 'git for-each-ref'-based approach.
Resurrect the old, pre-e832f5c09680 'git ls-remote'-based code for the
latter case to support listing short refs from remotes given as a URL.
The code is slightly updated from the original to
- take into account the path to the repository given on the command
line (if any), and
- omit 'ORIG_HEAD' from the query, as 'git ls-remote' will never
list it anyway.
When the remote given to __git_refs() doesn't exist, then it will be
handled by this resurrected 'git ls-remote' query. This code path
doesn't list 'HEAD' unconditionally, which has the nice side effect of
fixing two more expected test failures.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refs completion is attempted while not in a git repository, the
completion script offers 'HEAD' erroneously.
Check early in __git_refs() that there is either a repository or a
remote to work on, and return early if neither is given.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote given to __git_refs() happens to match both the name of
a configured remote and the name of a directory in the current working
directory, then that directory is assumed to be a git repository, and
listing refs from that directory will be attempted. This is wrong,
because in such a situation git commands (e.g. 'git fetch|pull|push
<remote>' whom these refs will eventually be passed to) give
precedence to the configured remote. Therefore, __git_refs() should
list refs from the configured remote as well.
Add the helper function __git_is_configured_remote() that checks
whether its argument matches the name of a configured remote. Use
this helper to decide how to handle the remote passed to __git_refs().
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In __git_refs() the git commands listing refs, both short and full,
from a given remote repository are run without giving them the path to
the git repository which might have been specified on the command line
via 'git --git-dir=<path>'. This is bad, those git commands should
access the 'refs/remotes/<remote>/' hierarchy or the remote and
credentials configuration in that specified repository.
Use the __gitdir() helper only to find the path to the .git directory
and pass the resulting path to the 'git ls-remote' and 'for-each-ref'
executions that list remote refs. While modifying that 'for-each-ref'
line, remove the superfluous disambiguating doubledash.
Don't use __gitdir() to check that the given remote is on the file
system: basically it performs only a single if statement for us at the
considerable cost of fork()ing a subshell for a command substitution.
We are better off to perform all the necessary checks of the remote in
__git_refs().
Though __git_refs() was the last remaining callsite that passed a
remote to __gitdir(), don't delete __gitdir()'s remote-handling part
yet, just in case some users' custom completion scriptlets depend on
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function prints the path to the git repository
to its stdout or stays silent and returns with error when it can't
find a repository or when the repository given via $GIT_DIR doesn't
exist.
This is not the case, however, when the path in $__git_dir, i.e. the
path to the repository specified on the command line via 'git
--git-dir=<path>', doesn't exist: __gitdir() still outputs it as if it
were a real existing repository, making some completion functions
believe that they operate on an existing repository.
Check that the path in $__git_dir exists and return with error without
printing anything to stdout if it doesn't.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check how __git_refs() lists refs in different scenarios, i.e.
- short and full refs,
- from a local or from a remote repository,
- remote specified via path, name or URL,
- with or without a repository specified on the command line,
- non-existing remote,
- unique remote branches for 'git checkout's tracking DWIMery,
- not in a git repository, and
- interesting combinations of the above.
Seven of these tests expect failure, mostly demonstrating bugs related
to listing refs from a remote repository:
- ignoring the repository specified on the command line (2 tests),
- listing refs from the wrong place when the name of a configured
remote happens to match a directory,
- listing only 'HEAD' but no short refs from a remote given as URL,
- listing 'HEAD' even from non-existing remotes (2 tests), and
- listing 'HEAD' when not in a repository.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The __gitdir() helper function shouldn't output anything if not in a
git repository. The relevant tests only checked its error code, so
extend them to ensure that there's no output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests of the __gitdir() helper function use the $TRASH_DIRECTORY
variable in direct path comparisons. In general this should be
avoided, because it might contain symbolic links. There happens to be
no issues with this here, however, because those tests use
$TRASH_DIRECTORY both for specifying the expected result and for
specifying input which in turn is just 'echo'ed verbatim.
Other __gitdir() tests ask for the path of the trash directory by
running $(pwd -P) in each test, sometimes even twice in a single test.
Run $(pwd) only once at the beginning of the test script to store the
path of the trash directory in a variable, and use that variable in
all __gitdir() tests.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test helper functions test_gitcomp() and test_gitcomp_nl() leak
the $cur variable into the test environment. Since this variable has
a special role in the Bash completion script (it holds the word
currently being completed) it influences the behavior of most
completion functions and thus this leakage could interfere with
subsequent tests. Although there are no such issues in the current
tests, early versions of the new tests that will be added later in
this series suffered because of this.
It's better to play safe and declare $cur local in those test helper
functions. 'local' is bashism, of course, but the tests of the Bash
completion script are run under Bash anyway, and there are already
other variables declared local in this test script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While preparing commits, three tests added newly created files to the
index using 'git add .', which added not only the files in question
but leftover test cruft from previous tests like the files 'expected'
and 'actual' as well. Luckily, this had no effect on the tests'
correctness.
Add only the files we are actually interested in.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "core.logAllRefUpdates" that used to be boolean has been
enhanced to take 'always' as well, to record ref updates to refs
other than the ones that are expected to be updated (i.e. branches,
remote-tracking branches and notes).
* cw/log-updates-for-all-refs-really:
doc: add note about ignoring '--no-create-reflog'
update-ref: add test cases for bare repository
refs: add option core.logAllRefUpdates = always
config: add markup to core.logAllRefUpdates doc
"make -C t failed" will now run only the tests that failed in the
previous run. This is usable only when prove is not use, and gives
a useless error message when run after "make clean", but otherwise
is serviceable.
* js/re-running-failed-tests:
t/Makefile: add a rule to re-run previously-failed tests
The user can specify a custom update method that is run when
"submodule update" updates an already checked out submodule. This
was ignored when checking the submodule out for the first time and
we instead always just checked out the commit that is bound to the
path in the superproject's index.
* sb/submodule-update-initial-runs-custom-script:
submodule update: run custom update script for initial populating as well
When a submodule "A", which has another submodule "B" nested within
it, is "absorbed" into the top-level superproject, the inner
submodule "B" used to be left in a strange state. The logic to
adjust the .git pointers in these submodules has been corrected.
* sb/submodule-recursive-absorb:
submodule absorbing: fix worktree/gitdir pointers recursively for non-moves
cache.h: expose the dying procedure for reading gitlinks
setup: add gentle version of resolve_git_dir
"git read-tree" and its underlying unpack_trees() machinery learned
to report problematic paths prefixed with the --super-prefix option.
* sb/unpack-trees-super-prefix:
unpack-trees: support super-prefix option
t1001: modernize style
t1000: modernize style
read-tree: use OPT_BOOL instead of OPT_SET_INT
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
Test tweaks for those who have default ACL in their git source tree
that interfere with the umask test.
* mm/reset-facl-before-umask-test:
t0001: don't let a default ACL interfere with the umask test
Test tweak for FreeBSD where /usr/bin/unzip is unsuitable to run
our tests but /usr/local/bin/unzip is usable.
* js/unzip-in-usr-bin-workaround:
test-lib: on FreeBSD, look for unzip(1) in /usr/local/bin/
After starting "git rebase -i", which first opens the user's editor
to edit the series of patches to apply, but before saving the
contents of that file, "git status" failed to show the current
state (i.e. you are in an interactive rebase session, but you have
applied no steps yet) correctly.
* js/status-pre-rebase-i:
status: be prepared for not-yet-started interactive rebase
"git submodule add" used to be confused and refused to add a
locally created repository; users can now use "--force" option
to add them.
* sb/submodule-add-force:
submodule add: extend force flag to add existing repos
Full pattern must be quoted. So 'pat"t"ern attr' will give exactly
'pat"t"ern', not 'pattern'. Also clarify that leading whitespaces are
not part of the pattern and document comment syntax.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The URL matching function computes for two URLs whether they match not.
The match is performed by splitting up the URL into different parts and
then doing an exact comparison with the to-be-matched URL.
The main user of `urlmatch` is the configuration subsystem. It allows to
set certain configurations based on the URL which is being connected to
via keys like `http.<url>.*`. A common use case for this is to set
proxies for only some remotes which match the given URL. Unfortunately,
having exact matches for all parts of the URL can become quite tedious
in some setups. Imagine for example a corporate network where there are
dozens or even hundreds of subdomains, which would have to be configured
individually.
Allow users to write an asterisk '*' in place of any 'host' or
'subdomain' label as part of the host name. For example,
"http.https://*.example.com.proxy" sets "http.proxy" for all direct
subdomains of "https://example.com", e.g. "https://foo.example.com", but
not "https://foo.bar.example.com".
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to be able to rank positive matches by `urlmatch`, we inspect
the path length and user part to decide whether a match is better than
another match. As all other parts are matched exactly between both URLs,
this is the correct thing to do right now.
In the future, though, we want to introduce wild cards for the domain
part. When doing this, it does not make sense anymore to only compare
the path lengths. Instead, we also want to compare the domain lengths to
determine which of both URLs matches the host part more closely.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This environment variable and configuration value allow to
override the autodetection of plink/tortoiseplink in case that
Git gets it wrong.
[jes: wrapped overly-long lines, factored out and changed
get_ssh_variant() to handle_ssh_variant() to accomodate the
change from the putty/tortoiseplink variables to
port_option/needs_batch, adjusted the documentation, free()d
value obtained from the config.]
Signed-off-by: Segev Finer <segev208@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
"git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* jk/blame-fixes:
blame: output porcelain "previous" header for each file
blame: handle --no-abbrev
blame: fix alignment with --abbrev=40
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* jk/archive-zip-userdiff-config:
archive-zip: load userdiff config
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
"git fast-import" sometimes mishandled while rebalancing notes
tree, which has been fixed.
* mh/fast-import-notes-fix-new:
fast-import: properly fanout notes when tree is imported
Compression setting for producing packfiles were spread across
three codepaths, one of which did not honor any configuration.
Unify these so that all of them honor core.compression and
pack.compression variables the same way.
* jc/compression-config:
compression: unify pack.compression configuration parsing
"git fsck --connectivity-check" was not working at all.
* jk/fsck-connectivity-check-fix:
fsck: lazily load types under --connectivity-only
fsck: move typename() printing to its own function
t1450: use "mv -f" within loose object directory
fsck: check HAS_OBJ more consistently
fsck: do not fallback "git fsck <bogus>" to "git fsck"
fsck: tighten error-checks of "git fsck <head>"
fsck: prepare dummy objects for --connectivity-check
fsck: report trees as dangling
t1450: clean up sub-objects in duplicate-entry test
Rewrite a scripted porcelain "git difftool" in C.
* js/difftool-builtin:
difftool: hack around -Wzero-length-format warning
difftool: retire the scripted version
difftool: implement the functionality in the builtin
difftool: add a skeleton for the upcoming builtin
A few codepaths had to rely on a global variable when sorting
elements of an array because sort(3) API does not allow extra data
to be passed to the comparison function. Use qsort_s() when
natively available, and a fallback implementation of it when not,
to eliminate the need, which is a prerequisite for making the
codepath reentrant.
* rs/qsort-s:
ref-filter: use QSORT_S in ref_array_sort()
string-list: use QSORT_S in string_list_sort()
perf: add basic sort performance test
add QSORT_S
compat: add qsort_s()
"git show-ref HEAD" used with "--verify" because the user is not
interested in seeing refs/remotes/origin/HEAD, and used with
"--head" because the user does not want HEAD to be filtered out,
i.e. "git show-ref --head --verify HEAD", did not work as expected.
* vp/show-ref-verify-head:
show-ref: remove a stale comment
show-ref: remove dead `if (verify)' check
show-ref: detect dangling refs under --verify as well
show-ref: move --quiet handling into show_one()
show-ref: allow -d to work with --verify
show-ref: accept HEAD with --verify
With anticipatory tweaking for remotes defined in ~/.gitconfig
(e.g. "remote.origin.prune" set to true, even though there may or
may not actually be "origin" remote defined in a particular Git
repository), "git remote rename" and other commands misinterpreted
and behaved as if such a non-existing remote actually existed.
* js/remote-rename-with-half-configured-remote:
remote rename: more carefully determine whether a remote is configured
remote rename: demonstrate a bogus "remote exists" bug
"git tag" and "git verify-tag" learned to put GPG verification
status in their "--format=<placeholders>" output format.
* st/verify-tag:
t/t7004-tag: Add --format specifier tests
t/t7030-verify-tag: Add --format specifier tests
builtin/tag: add --format argument for tag -v
builtin/verify-tag: add --format to verify-tag
ref-filter: add function to print single ref_array_item
gpg-interface, tag: add GPG_VERIFY_OMIT_STATUS flag
The sequencer machinery has been further enhanced so that a later
set of patches can start using it to reimplement "rebase -i".
* js/sequencer-i-countdown-3: (38 commits)
sequencer (rebase -i): write out the final message
sequencer (rebase -i): write the progress into files
sequencer (rebase -i): show the progress
sequencer (rebase -i): suggest --edit-todo upon unknown command
sequencer (rebase -i): show only failed cherry-picks' output
sequencer (rebase -i): show only failed `git commit`'s output
sequencer: use run_command() directly
sequencer: update reading author-script
sequencer (rebase -i): differentiate between comments and 'noop'
sequencer (rebase -i): implement the 'drop' command
sequencer (rebase -i): allow rescheduling commands
sequencer (rebase -i): respect strategy/strategy_opts settings
sequencer (rebase -i): respect the rebase.autostash setting
sequencer (rebase -i): run the post-rewrite hook, if needed
sequencer (rebase -i): record interrupted commits in rewritten, too
sequencer (rebase -i): copy commit notes at end
sequencer (rebase -i): set the reflog message consistently
sequencer (rebase -i): refactor setting the reflog message
sequencer (rebase -i): allow fast-forwarding for edit/reword
sequencer (rebase -i): implement the 'reword' command
...
"git submodule push" learned "--recurse-submodules=only option to
push submodules out without pushing the top-level superproject.
* bw/push-submodule-only:
push: add option to push only submodules
submodules: add RECURSE_SUBMODULES_ONLY value
transport: reformat flag #defines to be more readable
Implement the '--format' option provided by 'ref-filter'. This lets the
user list branches as per desired format similar to the implementation
in 'git for-each-ref'.
Add tests and documentation for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Port branch.c to use ref-filter APIs for printing. This clears out
most of the code used in branch.c for printing and replaces them with
calls made to the ref-filter library.
Introduce build_format() which gets the format required for printing
of refs. Make amendments to print_ref_list() to reflect these changes.
The strings included in build_format() may not be safely quoted for
inclusion (i.e. it might contain '%' which needs to be escaped with an
additional '%'). Introduce quote_literal_for_format() as a helper
function which takes a string and returns a version of the string that
is safely quoted to be used in the for-each-ref format which is built
in build_format().
Change calc_maxwidth() to also account for the length of HEAD ref, by
calling ref-filter:get_head_discription().
Also change the test in t6040 to reflect the changes.
Before this patch, all cross-prefix symrefs weren't shortened. Since
we're using ref-filter APIs, we shorten all symrefs by default. We also
allow the user to change the format if needed with the introduction of
the '--format' option in the next patch.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complimenting the existing 'lstrip=<N>' option, add an 'rstrip=<N>'
option which strips `<N>` slash-separated path components from the end
of the refname (e.g., `%(refname:rstrip=2)` turns `refs/tags/foo` into
`refs`).
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the 'lstrip=<N>' option only takes a positive value '<N>'
and strips '<N>' slash-separated path components from the left. Modify
the 'lstrip' option to also take a negative number '<N>' which would
strip from the left as necessary and _leave_ behind only 'N'
slash-separated path components from the right-most end.
For e.g. %(refname:lstrip=-1) would make 'foo/goo/abc' into 'abc'.
Add documentation and tests for the same.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message printed by "git merge-recursive" for a rename/delete
conflict is like this:
CONFLICT (rename/delete): new-path deleted in HEAD and renamed in
other-branch. Version other-branch of new-path left in tree.
To be more helpful, the message should show both paths of the rename and
state that the deletion occurred at the old path, not the new path. So
change the message to the following format:
CONFLICT (rename/delete): old-path deleted in HEAD and renamed to
new-path in other-branch. Version other-branch of new-path left in tree.
Since this doubles the number of cases in handle_change_delete (modify vs.
rename), refactor the code to halve the number of cases again by merging the
cases where o->branch1 has the change and o->branch2 has the delete with the
cases that are the other way around.
Also add a simple test of the new conflict message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as
8ed0a740dd. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 898b14c (pack-objects: rework check_delta_limit usage,
2007-04-16), we check the delta depth limit only when
figuring out whether we should make a new delta. We don't
consider it at all when reusing deltas, which means that
packing once with --depth=250, and then again with
--depth=50, the second pack may still contain chains larger
than 50.
This is generally considered a feature, as the results of
earlier high-depth repacks are carried forward, used for
serving fetches, etc. However, since we started using
cross-pack deltas in c9af708b1 (pack-objects: use mru list
when iterating over packs, 2016-08-11), we are no longer
bounded by the length of an existing delta chain in a single
pack.
Here's one particular pathological case: a sequence of N
packs, each with 2 objects, the base of which is stored as a
delta in a previous pack. If we chain all the deltas
together, we have a cycle of length N. We break the cycle,
but the tip delta is still at depth N-1.
This is less unlikely than it might sound. See the included
test for a reconstruction based on real-world actions. I
ran into such a case in the wild, where a client was rapidly
sending packs, and we had accumulated 10,000 before doing a
server-side repack. The pack that "git repack" tried to
generate had a very deep chain, which caused pack-objects to
run out of stack space in the recursive write_one().
This patch bounds the length of delta chains in the output
pack based on --depth, regardless of whether they are caused
by cross-pack deltas or existed in the input packs. This
fixes the problem, but does have two possible downsides:
1. High-depth aggressive repacks followed by "normal"
repacks will throw away the high-depth chains.
In the long run this is probably OK; investigation
showed that high-depth repacks aren't actually
beneficial, and we dropped the aggressive depth default
to match the normal case in 07e7dbf0d (gc: default
aggressive depth to 50, 2016-08-11).
2. If you really do want to store high-depth deltas on
disk, they may be discarded and new delta computed when
serving a fetch, unless you set pack.depth to match
your high-depth size.
The implementation uses the existing search for delta
cycles. That lets us compute the depth of any node based on
the depth of its base, because we know the base is DFS_DONE
by the time we look at it (modulo any cycles in the graph,
but we know there cannot be any because we break them as we
see them).
There is some subtlety worth mentioning, though. We record
the depth of each object as we compute it. It might seem
like we could save the per-object storage space by just
keeping track of the depth of our traversal (i.e., have
break_delta_chains() report how deep it went). But we may
visit an object through multiple delta paths, and on
subsequent paths we want to know its depth immediately,
without having to walk back down to its final base (doing so
would make our graph walk quadratic rather than linear).
Likewise, one could try to record the depth not from the
base, but from our starting point (i.e., start
recursion_depth at 0, and pass "recursion_depth + 1" to each
invocation of break_delta_chains()). And then when
recursion_depth gets too big, we know that we must cut the
delta chain. But that technique is wrong if we do not visit
the nodes in topological order. In a chain A->B->C, it
if we visit "C", then "B", then "A", we will never recurse
deeper than 1 link (because we see at each node that we have
already visited it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong reported that while FreeBSD has a /usr/bin/unzip, it uses
different semantics from those that are needed by Git's tests: When
passing the -a option to Info-Zip, it heeds the text attribute of the
.zip file's central directory, while FreeBSD's unzip ignores that
attribute.
The common work-around is to install Info-Zip on FreeBSD, into
/usr/local/bin/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch automates the process of determining which tests failed
previously and re-running them.
While developing patch series, it is a good practice to run the test
suite from time to time, just to make sure that obvious bugs are caught
early. With complex patch series, it is common to run `make -j15 -k
test`, i.e. run the tests in parallel and *not* stop at the first
failing test but continue. This has the advantage of identifying
possibly multiple problems in one big test run.
It is particularly important to reduce the turn-around time thusly on
Windows, where the test suite spends 45 minutes on the computer on which
this patch was developed.
It is the most convenient way to determine which tests failed after
running the entire test suite, in parallel, to look for left-over "trash
directory.t*" subdirectories in the t/ subdirectory. However, those
directories might live outside t/ when overridden using the
--root=<directory> option, to which the Makefile has no access. The next
best method is to grep explicitly for failed tests in the test-results/
directory, which the Makefile *can* access.
Please note that the often-recommended `prove` tool requires Perl, and
that opens a whole new can of worms on Windows. As no native Windows Perl
comes with Subversion bindings, we have to use a Perl in Git for Windows
that uses the POSIX emulation layer named MSYS2 (which is a portable
version of Cygwin). When using this emulation layer under stress, e.g.
when running massively-parallel tests, unexplicable crashes occur quite
frequently, and instead of having a solution to the original problem, the
developer now has an additional, quite huge problem. For that reason, this
developer rejected `prove` as a solution and went with this patch instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some developers might want to call `git status` in a working
directory where they just started an interactive rebase, but the
edit script is still opened in the editor.
Let's show a meaningful message in such cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1b4735d9f3 (submodule: no [--merge|--rebase] when newly cloned,
2011-02-17), all actions were defaulted to checkout for populating
a submodule initially, because merging or rebasing makes no sense
in that situation.
Other commands however do make sense, such as the custom command
that was added later (6cb5728c43, submodule update: allow custom
command to update submodule working tree, 2013-07-03).
I am unsure about the "none" command, as I can see an initial
checkout there as a useful thing. On the other hand going strictly
by our own documentation, we should do nothing in case of "none"
as well, because the user asked for it.
Reported-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider having a submodule 'sub' and a nested submodule at 'sub/nested'.
When nested is already absorbed into sub, but sub is not absorbed into
its superproject, then we need to fixup the gitfile and core.worktree
setting for 'nested' when absorbing 'sub', but we do not need to move
its git dir around.
Previously 'nested's gitfile contained "gitdir: ../.git/modules/nested";
it has to be corrected to "gitdir: ../../.git/modules/sub1/modules/nested".
An alternative I considered to do this work lazily, i.e. when resolving
"../.git/modules/nested", we would notice the ".git" being a gitfile
linking to another path. That seemed to be robuster by design, but harder
to get the implementation right. Maybe we have to do that anyway once we
try to have submodules and worktrees working nicely together, but for now
just produce 'correct' (i.e. direct) pointers.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows has special support for the popular SSH client PuTTY:
when using PuTTY's non-interactive version ("plink.exe"), we use the -P
option to specify the port rather than OpenSSH's -p option. TortoiseGit
ships with its own, forked version of plink.exe, that adds support for
the -batch option, and for good measure we special-case that, too.
However, this special-casing of PuTTY only covers the case where the
user overrides the SSH command via the environment variable GIT_SSH
(which allows specifying the name of the executable), not
GIT_SSH_COMMAND (which allows specifying a full command, including
additional command-line options).
When users want to pass any additional arguments to (Tortoise-)Plink,
such as setting a private key, they are required to either use a shell
script named plink or tortoiseplink or duplicate the logic that is
already in Git for passing the correct style of command line arguments,
which can be difficult, error prone and annoying to get right.
This patch simply reuses the existing logic and expands it to cover
GIT_SSH_COMMAND, too.
Note: it may look a little heavy-handed to duplicate the entire
command-line and then split it, only to extract the name of the
executable. However, this is not a performance-critical code path, and
the code is much more readable this way.
Signed-off-by: Segev Finer <segev208@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the future we want to support working tree operations within submodules,
e.g. "git checkout --recurse-submodules", which will update the submodule
to the commit as recorded in its superproject. In the submodule the
unpack-tree operation is carried out as usual, but the reporting to the
user needs to prefix any path with the superproject. The mechanism for
this is the super-prefix. (see 74866d757, git: make super-prefix option)
Add support for the super-prefix option for commands that unpack trees
by wrapping any path output in unpacking trees in the newly introduced
super_prefixed function. This new function prefixes any path with the
super-prefix if there is one. Assuming the submodule case doesn't happen
in the majority of the cases, we'd want to have a fast behavior for no
super prefix, i.e. no reallocation/copying, but just returning path.
Another aspect of introducing the `super_prefixed` function is to consider
who owns the memory and if this is the right place where the path gets
modified. As the super prefix ought to change the output behavior only and
not the actual unpack tree part, it is fine to be that late in the line.
As we get passed in 'const char *path', we cannot change the path itself,
which means in case of a super prefix we have to copy over the path.
We need two static buffers in that function as the error messages
contain at most two paths.
For testing purposes enable it in read-tree, which has no output
of paths other than an unpack-trees.c. These are all converted in
this patch.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loose objects are created with mode 0444. That doesn't
prevent them being overwritten by rename(), but some
versions of "mv" will be extra careful and prompt the user,
even without "-i".
Reportedly macOS does this, at least in the Travis builds.
The prompt reads from /dev/null, defaulting to "no", and the
object isn't moved. Then to make matters even more
interesting, it still returns "0" and the rest of the test
proceeds, but with a broken setup.
We can work around it by using "mv -f" to override the
prompt. This should work as it's already used in t5504 for
the same purpose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-describe the `--exclude` option which will allow specifying
a glob pattern of tags to ignore. This can be combined with the
`--match` patterns to enable more flexibility in determining which tags
to consider.
For example, suppose you wish to find the first official release tag
that contains a certain commit. If we assume that official release tags
are of the form "v*" and pre-release candidates include "*rc*" in their
name, we can now find the first release tag that introduces the commit
abcdef:
git describe --contains --match="v*" --exclude="*rc*" abcdef
Add documentation, tests, and completion for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `--match` to be accepted multiple times, accumulating a list of
patterns to match into a string list. Each pattern is inclusive, such
that a tag need only match one of the provided patterns to be
considered for matching.
This extension is useful as it enables more flexibility in what tags
match, and may avoid the need to run the describe command multiple
times to get the same result.
Add tests and update the documentation for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend git-name-rev to support excluding refs which match shell patterns
using --exclude. These patterns can be used to limit the scope of refs
by excluding any ref that matches one of the --exclude patterns. A ref
will only be used for naming when it matches at least one --refs pattern
but does not match any of the --exclude patterns. Thus, --exclude
patterns are given precedence over --refs patterns.
For example, suppose you wish to name a series of commits based on an
official release tag of the form "v*" but excluding any pre-release tags
which match "*rc*". You can use the following to do so:
git name-rev --refs="v*" --exclude="*rc*" --all
Add tests and update Documentation for this change.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git name-rev to take multiple --refs stored as a string list of
patterns. The list of patterns will be matched inclusively, and each ref
only needs to match one pattern to be included. A ref will only be
excluded if it does not match any of the given patterns. Additionally,
if any of the patterns would allow abbreviation, then we will abbreviate
the ref, even if another pattern is more strict and would not have
allowed abbreviation on its own.
Add tests and documentation for this change. The tests expected output
is dynamically generated. This is in order to avoid hard-coding
a commit object name in the test results (as the expected output is to
simply leave the commit object unnamed).
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a 256 colors terminal (or one with true color support), then
the predefined 12 colors seem limited. On the other hand, you don't want
to draw graph lines with every single color in this mode because the two
colors could look extremely similar. This option allows you to hand pick
the colors you want.
Even with standard terminal, if your background color is neither black
or white, then the graph line may match your background and become
hidden. You can exclude your background color (or simply the colors you
hate) with this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prereleaseSuffix feature of version comparison that is used in
"git tag -l" did not correctly when two or more prereleases for the
same release were present (e.g. when 2.0, 2.0-beta1, and 2.0-beta2
are there and the code needs to compare 2.0-beta1 and 2.0-beta2).
* sg/fix-versioncmp-with-common-suffix:
versioncmp: generalize version sort suffix reordering
versioncmp: factor out helper for suffix matching
versioncmp: use earliest-longest contained suffix to determine sorting order
versioncmp: cope with common part overlapping with prerelease suffix
versioncmp: pass full tagnames to swap_prereleases()
t7004-tag: add version sort tests to show prerelease reordering issues
t7004-tag: use test_config helper
t7004-tag: delete unnecessary tags with test_when_finished
"git diff" learned diff.interHunkContext configuration variable
that gives the default value for its --inter-hunk-context option.
* vn/diff-ihc-config:
diff: add interhunk context config option
Tighten a test to avoid mistaking an extended ERE regexp engine as
a PRE regexp engine.
* jk/grep-e-could-be-extended-beyond-posix:
t7810: avoid assumption about invalid regex syntax
Move detection of dangling refs into show_one(), so that they are
detected when --verify is present as well as when it is absent.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move handling of -d into show_one(), so that it takes effect when
--verify is present as well as when it is absent. This is useful when
the user wishes to avoid the costly iteration of refs.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, when --verify was specified, show-ref would use a separate
code path which did not handle HEAD and treated it as an invalid
ref. Thus, "git show-ref --verify HEAD" (where "--verify" is used
because the user is not interested in seeing refs/remotes/origin/HEAD)
did not work as expected.
Instead of insisting that the input begins with "refs/", allow "HEAD"
as well in the codepath that handles "--verify", so that all valid
full refnames including HEAD are passed to the same output machinery.
Signed-off-by: Vladimir Panteleev <git@thecybershadow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a sort command to test-string-list that reads lines from stdin,
stores them in a string_list and then sorts it. Use it in a simple
perf test script to measure the performance of string_list_sort().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the really nice features of the ~/.gitconfig file is that users
can override defaults by their own preferred settings for all of their
repositories.
One such default that some users like to override is whether the
"origin" remote gets auto-pruned or not. The user would simply call
git config --global remote.origin.prune true
and from now on all "origin" remotes would be pruned automatically when
fetching into the local repository.
There is just one catch: now Git thinks that the "origin" remote is
configured, even if the repository config has no [remote "origin"]
section at all, as it does not realize that the "prune" setting was
configured globally and that there really is no "origin" remote
configured in this repository.
That is a problem e.g. when renaming a remote to a new name, when Git
may be fooled into thinking that there is already a remote of that new
name.
Let's fix this by paying more attention to *where* the remote settings
came from: if they are configured in the local repository config, we
must not overwrite them. If they were configured elsewhere, we cannot
overwrite them to begin with, as we only write the repository config.
There is only one caller of remote_is_configured() (in `git fetch`) that
may want to take remotes into account even if they were configured
outside the repository config; all other callers essentially try to
prevent the Git command from overwriting settings in the repository
config.
To accommodate that fact, the remote_is_configured() function now
requires a parameter that states whether the caller is interested in all
remotes, or only in those that were configured in the repository config.
Many thanks to Jeff King whose tireless review helped with settling for
nothing less than the current strategy.
This fixes https://github.com/git-for-windows/git/issues/888
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users like to set `remote.origin.prune = true` in their ~/.gitconfig
so that all of their repositories use that default.
However, our code is ill-prepared for this, mistaking that single entry to
mean that there is already a remote of the name "origin", even if there is
not.
This patch adds a test case demonstrating this issue.
Reported by Andrew Arnott.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It served its purpose, but now we have a builtin difftool. Time for the
Perl script to enjoy Florida.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git mergetool" without any pathspec on the command line that is
run from a subdirectory became no-op in Git v2.11 by mistake, which
has been fixed.
* rh/mergetool-regression-fix:
mergetool: fix running in subdir when rerere enabled
mergetool: take the "-O" out of $orderfile
t7610: add test case for rerere+mergetool+subdir bug
t7610: spell 'git reset --hard' consistently
t7610: don't assume the checked-out commit
t7610: always work on a test-specific branch
t7610: delete some now-unnecessary 'git reset --hard' lines
t7610: run 'git reset --hard' after each test to clean up
t7610: don't rely on state from previous test
t7610: use test_when_finished for cleanup tasks
t7610: move setup code to the 'setup' test case
t7610: update branch names to match test number
rev-parse doc: pass "--" to rev-parse in the --prefix example
.mailmap: record canonical email for Richard Hansen
Running "git add a/b" when "a" is a submodule correctly errored
out, but without a meaningful error message.
* sb/pathspec-errors:
pathspec: give better message for submodule related pathspec error
"git push \\server\share\dir" has recently regressed and then
fixed. A test has retroactively been added for this breakage.
* js/mingw-test-push-unc-path:
mingw: add a regression test for pushing to UNC paths
"git <cmd> @{push}" on a detached HEAD used to segfault; it has
been corrected to error out with a message.
* km/branch-get-push-while-detached:
branch_get_push: do not segfault when HEAD is detached
"git blame --porcelain" misidentified the "previous" <commit, path>
pair (aka "source") when contents came from two or more files.
* jk/blame-fixes:
blame: output porcelain "previous" header for each file
blame: handle --no-abbrev
blame: fix alignment with --abbrev=40
"git archive" did not read the standard configuration files, and
failed to notice a file that is marked as binary via the userdiff
driver configuration.
* jk/archive-zip-userdiff-config:
archive-zip: load userdiff config
It is natural that "git gc --auto" may not attempt to pack
everything into a single pack, and there is no point in warning
when the user has configured the system to use the pack bitmap,
leading to disabling further "gc".
* dt/disable-bitmap-in-auto-gc:
repack: die on incremental + write-bitmap-index
auto gc: don't write bitmaps for incremental repacks
"git rm" used to refuse to remove a submodule when it has its own
git repository embedded in its working tree. It learned to move
the repository away to $GIT_DIR/modules/ of the superproject
instead, and allow the submodule to be deleted (as long as there
will be no loss of local modifications, that is).
* sb/submodule-rm-absorb:
rm: absorb a submodules git dir before deletion
submodule: rename and add flags to ok_to_remove_submodule
submodule: modernize ok_to_remove_submodule to use argv_array
submodule.h: add extern keyword to functions
"git grep" has been taught to optionally recurse into submodules.
* bw/grep-recurse-submodules:
grep: search history of moved submodules
grep: enable recurse-submodules to work on <tree> objects
grep: optionally recurse into submodules
grep: add submodules as a grep source type
submodules: load gitmodules file from commit sha1
submodules: add helper to determine if a submodule is initialized
submodules: add helper to determine if a submodule is populated
real_path: canonicalize directory separators in root parts
real_path: have callers use real_pathdup and strbuf_realpath
real_path: create real_pathdup
real_path: convert real_path_internal to strbuf_realpath
real_path: resolve symlinks by hand
tag -v now supports --format specifiers to inspect the contents of a tag
upon verification. Add two tests to ensure this behavior is respected in
future changes.
Signed-off-by: Santiago Torres <santiago@nyu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify-tag now provides --format specifiers to inspect and ensure the
contents of the tag are proper. We add two tests to ensure this
functionality works as expected: the return value should indicate if
verification passed, and the format specifiers must be respected.
Signed-off-by: Santiago Torres <santiago@nyu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the http server gives an incomplete response to a smart-http
rpc call, it could lead to client waiting for a full response that
will never come. Teach the client side to notice this condition
and abort the transfer.
An improvement counterproposal has failed.
cf. <20161114194049.mktpsvgdhex2f4zv@sigill.intra.peff.net>
* dt/smart-http-detect-server-going-away:
upload-pack: optionally allow fetching any sha1
remote-curl: don't hang when a server dies before any output
"git p4" that tracks multile p4 paths imported a single changelist
that touches files in these multiple paths as one commit, followed
by many empty commits. This has been fixed.
* gv/p4-multi-path-commit-fix:
git-p4: fix multi-path changelist empty commits
A lazy "git push" without refspec did not internally use a fully
specified refspec to perform 'current', 'simple', or 'upstream'
push, causing unnecessary "ambiguous ref" errors.
* jc/push-default-explicit:
push: test pushing ambiguously named branches
push: do not use potentially ambiguous default refspec
"git index-pack --stdin" needs an access to an existing repository,
but "git index-pack file.pack" to generate an .idx file that
corresponds to a packfile does not.
* jk/index-pack-wo-repo-from-stdin:
index-pack: skip collision check when not in repository
t: use nongit() function where applicable
index-pack: complain when --stdin is used outside of a repo
t5000: extract nongit function to test-lib-functions.sh
A recent update to receive-pack to make it easier to drop garbage
objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot
have a pathname with a colon in it (no surprise!), and this in turn
made it impossible to push into a repository at such a path. This
has been fixed by introducing a quoting mechanism used when
appending such a path to the colon-separated list.
* jk/quote-env-path-list-component:
t5615-alternate-env: double-quotes in file names do not work on Windows
t5547-push-quarantine: run the path separator test on Windows, too
tmp-objdir: quote paths we add to alternates
alternates: accept double-quoted paths
Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back
to where cherry-pick started while picking multiple changes, when
the cherry-pick stopped to ask for help from the user, and the user
did "git reset --hard" to a different commit in order to re-attempt
the operation.
* sb/sequencer-abort-safety:
Revert "sequencer: remove useless get_dir() function"
sequencer: remove useless get_dir() function
sequencer: make sequencer abort safer
t3510: test that cherry-pick --abort does not unsafely change HEAD
am: change safe_to_abort()'s not rewinding error into a warning
am: fix filename in safe_to_abort() error message
"git pull --rebase", when there is no new commits on our side since
we forked from the upstream, should be able to fast-forward without
invoking "git rebase", but it didn't.
* jc/pull-rebase-ff:
pull: fast-forward "pull --rebase=true"
"git commit --allow-empty --only" (no pathspec) with dirty index
ought to be an acceptable way to create a new commit that does not
change any paths, but it was forbidden, perhaps because nobody
needed it so far.
* ak/commit-only-allow-empty:
commit: remove 'Clever' message for --only --amend
commit: make --only --allow-empty work without paths
"git difftool --dir-diff" had a minor regression when started from
a subdirectory, which has been fixed.
* da/difftool-dir-diff-fix:
difftool: fix dir-diff index creation when in a subdirectory
When diff.renames configuration is on (and with Git 2.9 and later,
it is enabled by default, which made it worse), "git stash"
misbehaved if a file is removed and another file with a very
similar content is added.
* jk/stash-disable-renames-internally:
stash: prefer plumbing over git-diff
Update the error messages from the dumb-http client when it fails
to obtain loose objects; we used to give sensible error message
only upon 404 but we now forbid unexpected redirects that needs to
be reported with something sensible.
* jk/http-walker-limit-redirect:
http-walker: complain about non-404 loose object errors
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
Fix a corner case in merge-recursive regression that crept in
during 2.10 development cycle.
* jc/renormalize-merge-kill-safer-crlf:
convert: git cherry-pick -Xrenormalize did not work
merge-recursive: handle NULL in add_cacheinfo() correctly
cherry-pick: demonstrate a segmentation fault
"git p4" LFS support was broken when LFS stores an empty blob.
* ls/p4-empty-file-on-lfs:
git-p4: fix empty file processing for large file system backend GitLFS
The output from "git worktree list" was made in readdir() order,
and was unstable.
* nd/worktree-list-fixup:
worktree list: keep the list sorted
worktree.c: get_worktrees() takes a new flag argument
get_worktrees() must return main worktree as first item even on error
worktree: reorder an if statement
worktree.c: zero new 'struct worktree' on allocation
