The "Specifying ranges" section does not mention explicitly that
several commits can be specified to form a range.
Add a mention to that effect.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add links to the documentation for `git rev-list` and `git diff`
instead of simply mentioning them, to make it easier for readers to reach
these documentation pages. Let's link to `git diff` as this is the
porcelain command, and the rest of the family (`diff-index`, `diff-tree` and
`diff-files`) are mentioned in the "Raw output format" section of the
`git diff` documentation.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fetch.writeCommitGraph feature makes fetches write out a commit
graph file for the newly downloaded pack on fetch. This improves the
performance of various commands that would perform a revision walk and
eventually ought to be the default for everyone. To prepare for that
future, it's enabled by default for users that set
feature.experimental=true to experience such future defaults.
Alas, for --unshallow fetches from a shallow clone it runs into a
snag: by the time Git has fetched the new objects and is writing a
commit graph, it has performed a revision walk and r->parsed_objects
contains information about the shallow boundary from *before* the
fetch. The commit graph writing code is careful to avoid writing a
commit graph file in shallow repositories, but the new state is not
shallow, and the result is that from that point on, commands like "git
log" make use of a newly written commit graph file representing a
fictional history with the old shallow boundary.
We could fix this by making the commit graph writing code more careful
to avoid writing a commit graph that could have used any grafts or
shallow state, but it is possible that there are other pieces of
mutated state that fetch's commit graph writing code may be relying
on. So disable it in the feature.experimental configuration.
Google developers have been running in this configuration (by setting
fetch.writeCommitGraph=false in the system config) to work around this
bug since it was discovered in April. Once the fix lands, we'll
enable fetch.writeCommitGraph=true again to give it some early testing
before rolling out to a wider audience.
In other words:
- this patch only affects behavior with feature.experimental=true
- it makes feature.experimental match the configuration Google has
been using for the last few months, meaning it would leave users in
a better tested state than without it
- this should improve testing for other features guarded by
feature.experimental, by making feature.experimental safer to use
Reported-by: Jay Conrod <jayconrod@google.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fast-export --anonymize" learned to take customized mapping to
allow its users to tweak its output more usable for debugging.
* jk/fast-export-anonym-alt:
fast-export: use local array to store anonymized oid
fast-export: anonymize "master" refname
fast-export: allow seeding the anonymized mapping
fast-export: add a "data" callback parameter to anonymize_str()
fast-export: move global "idents" anonymize hashmap into function
fast-export: use a flex array to store anonymized entries
fast-export: stop storing lengths in anonymized hashmaps
fast-export: tighten anonymize_mem() interface to handle only strings
fast-export: store anonymized oids as hex strings
fast-export: use xmemdupz() for anonymizing oids
t9351: derive anonymized tree checks from original repo
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
The documentation and some tests have been adjusted for the recent
renaming of "pu" branch to "seen".
* js/pu-to-seen:
tests: reference `seen` wherever `pu` was referenced
docs: adjust the technical overview for the rename `pu` -> `seen`
docs: adjust for the recent rename of `pu` to `seen`
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
When displaying cat-file usage, the fact that a <format> can
be specified is only visible when lookling at the --batch and
--batch-check options which are shown like this:
--batch[=<format>] show info and content of objects fed from the standard input
--batch-check[=<format>]
show info about objects fed from the standard input
It seems more coherent and improves discovery to also show it
on the usage line.
In the documentation the DESCRIPTION tells us that "The output
format can be overridden using the optional <format> argument",
but we can't see the <format> argument in the SYNOPSIS above
the description which is confusing.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changed-path Bloom filters were released in v2.27.0, but have a
significant drawback. A user can opt-in to writing the changed-path
filters using the "--changed-paths" option to "git commit-graph write"
but the next write will drop the filters unless that option is
specified.
This becomes even more important when considering the interaction with
gc.writeCommitGraph (on by default) or fetch.writeCommitGraph (part of
features.experimental). These config options trigger commit-graph writes
that the user did not signal, and hence there is no --changed-paths
option available.
Allow a user that opts-in to the changed-path filters to persist the
property of "my commit-graph has changed-path filters" automatically. A
user can drop filters using the --no-changed-paths option.
In the process, we need to be extremely careful to match the Bloom
filter settings as specified by the commit-graph. This will allow future
versions of Git to customize these settings, and the version with this
change will persist those settings as commit-graphs are rewritten on
top.
Use the trace2 API to signal the settings used during the write, and
check that output in a test after manually adjusting the correct bytes
in the commit-graph file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After you anonymize a repository, it can be hard to find which commits
correspond between the original and the result, and thus hard to
reproduce commands that triggered bugs in the original.
Let's make it possible to seed the anonymization map. This lets users
either:
- mark names to be retained as-is, if they don't consider them secret
(in which case their original commands would just work)
- map names to new values, which lets them adapt the reproduction
recipe to the new names without revealing the originals
The implementation is fairly straight-forward. We already store each
anonymized token in a hashmap (so that the same token appearing twice is
converted to the same result). We can just introduce a new "seed"
hashmap which is consulted first.
This does make a few more promises to the user about how we'll anonymize
things (e.g., token-splitting pathnames). But it's unlikely that we'd
want to change those rules, even if the actual anonymization of a single
token changes. And it makes things much easier for the user, who can
unblind only a directory name without having to specify each path within
it.
One alternative to this approach would be to anonymize as we see fit,
and then dump the whole refname and pathname mappings to a file. This
does work, but it's a bit awkward to use (you have to manually dig the
items you care about out of the mapping).
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "fetch/clone" protocol has been updated to allow the server to
instruct the clients to grab pre-packaged packfile(s) in addition
to the packed object data coming over the wire.
* jt/cdn-offload:
upload-pack: fix a sparse '0 as NULL pointer' warning
upload-pack: send part of packfile response as uri
fetch-pack: support more than one pack lockfile
upload-pack: refactor reading of pack-objects out
Documentation: add Packfile URIs design doc
Documentation: order protocol v2 sections
http-fetch: support fetching packfiles by URL
http-fetch: refactor into function
http: refactor finish_http_pack_request()
http: use --stdin when indexing dumb HTTP pack
"git diff" used to take arguments in random and nonsense range
notation, e.g. "git diff A..B C", "git diff A..B C...D", etc.,
which has been cleaned up.
* ct/diff-with-merge-base-clarification:
Documentation: usage for diff combined commits
git diff: improve range handling
t/t3430: avoid undefined git diff behavior
This patch tries to rewrite history a bit: the mail contents that have
been added to Git's source code are actually fixed, we cannot change
them in hindsight.
But as the `pu` branch _was_ renamed, and as the documents were added to
Git's source code not so much as historical record, but to describe the
status quo, let's pretend that we have a time machine and adjust the
provided information accordingly.
Where appropriate, quotes were added for readability.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of "What's cooking in git.git (Jun 2020, #04; Mon, 22)", there is no
longer any `pu` branch, but a `seen` branch.
While we technically do not even need to update the manual pages, it
makes sense to update them because they clearly talk about branches in
git.git.
Please note that in two instances, this patch not only updates the
branch name, but also the description "(proposed updates)".
Where appropriate, quotes have been added for readability.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a repository without any branches, Git chooses a default
branch name for the as-yet unborn branch.
As part of the implicit initialization of the local repository, Git just
learned to respect `init.defaultBranch` to choose a different initial
branch name. We now really want that branch name to be used as a
fall-back.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We just introduced the command-line option
`--initial-branch=<branch-name>` to allow initializing a new repository
with a different initial branch than the hard-coded one.
To allow users to override the initial branch name more permanently
(i.e. without having to specify the name manually for each and every
`git init` invocation), let's introduce the `init.defaultBranch` config
setting.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Don Goodman-Wilson <don@goodman-wilson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a growing number of projects and companies desiring to change
the main branch name of their repositories (see e.g.
https://twitter.com/mislav/status/1270388510684598272 for background on
this).
To change that branch name for new repositories, currently the only way
to do that automatically is by copying all of Git's template directory,
then hard-coding the desired default branch name into the `.git/HEAD`
file, and then configuring `init.templateDir` to point to those copied
template files.
To make this process much less cumbersome, let's introduce a new option:
`--initial-branch=<branch-name>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a couple of instances in our manual pages that had an
opening diamond bracket without a corresponding closing one.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `remote.<name>.branch` is not configured, `git submodule update`
currently falls back to using the branch name `master`. A much better
idea, however, is to use the remote `HEAD`: on all Git servers running
reasonably recent Git versions, the symref `HEAD` points to the main
branch.
Note: t7419 demonstrates that there _might_ be use cases out there that
_expect_ `git submodule update --remote` to update submodules to the
remote `master` branch even if the remote `HEAD` points to another
branch. Arguably, this patch makes the behavior more intuitive, but
there is a slight possibility that this might cause regressions in
obscure setups.
Even so, it should be okay to fix this behavior without anything like a
longer transition period:
- The `git submodule update --remote` command is not really common.
- Current Git's behavior when running this command is outright
confusing, unless the remote repository's current branch _is_ `master`
(in which case the proposed behavior matches the old behavior).
- If a user encounters a regression due to the changed behavior, the fix
is actually trivial: setting `submodule.<name>.branch` to `master`
will reinstate the old behavior.
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effect of sparse checkout settings on submodules is documented.
* en/sparse-with-submodule-doc:
git-sparse-checkout: clarify interactions with submodules
The same worktree directory must be registered only once, but
"git worktree move" allowed this invariant to be violated, which
has been corrected.
* es/worktree-duplicate-paths:
worktree: make "move" refuse to move atop missing registered worktree
worktree: generalize candidate worktree path validation
worktree: prune linked worktree referencing main worktree path
worktree: prune duplicate entries referencing same worktree path
worktree: make high-level pruning re-usable
worktree: give "should be pruned?" function more meaningful name
worktree: factor out repeated string literal
The interface to redact sensitive information in the trace output
has been simplified.
* jt/redact-all-cookies:
http: redact all cookies, teach GIT_TRACE_REDACT=0
git index-pack is usually run in a repository, but need not be. Since
packs don't contains information on the algorithm in use, instead
relying on context, add an option to index-pack to tell it which one
we're using in case someone runs it outside of a repository. Since
using --stdin necessarily implies a repository, don't allow specifying
an object format if it's provided to prevent users from passing an
option that won't work. Add documentation for this option.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level reference transactions used to update references are
currently completely opaque to the user. While certainly desirable in
most usecases, there are some which might want to hook into the
transaction to observe all queued reference updates as well as observing
the abortion or commit of a prepared transaction.
One such usecase would be to have a set of replicas of a given Git
repository, where we perform Git operations on all of the repositories
at once and expect the outcome to be the same in all of them. While
there exist hooks already for a certain subset of Git commands that
could be used to implement a voting mechanism for this, many others
currently don't have any mechanism for this.
The above scenario is the motivation for the new "reference-transaction"
hook that reaches directly into Git's reference transaction mechanism.
The hook receives as parameter the current state the transaction was
moved to ("prepared", "committed" or "aborted") and gets via its
standard input all queued reference updates. While the exit code gets
ignored in the "committed" and "aborted" states, a non-zero exit code in
the "prepared" state will cause the transaction to be aborted
prematurely.
Given the usecase described above, a voting mechanism can now be
implemented via this hook: as soon as it gets called, it will take all
of stdin and use it to cast a vote to a central service. When all
replicas of the repository agree, the hook will exit with zero,
otherwise it will abort the transaction by returning non-zero. The most
important upside is that this will catch _all_ commands writing
references at once, allowing to implement strong consistency for
reference updates via a single mechanism.
In order to test the impact on the case where we don't have any
"reference-transaction" hook installed in the repository, this commit
introduce two new performance tests for git-update-refs(1). Run against
an empty repository, it produces the following results:
Test origin/master HEAD
--------------------------------------------------------------------
1400.2: update-ref 2.70(2.10+0.71) 2.71(2.10+0.73) +0.4%
1400.3: update-ref --stdin 0.21(0.09+0.11) 0.21(0.07+0.14) +0.0%
The performance test p1400.2 creates, updates and deletes a branch a
thousand times, thus averaging runtime of git-update-refs over 3000
invocations. p1400.3 instead calls `git-update-refs --stdin` three times
and queues a thousand creations, updates and deletes respectively.
As expected, p1400.3 consistently shows no noticeable impact, as for
each batch of updates there's a single call to access(3P) for the
negative hook lookup. On the other hand, for p1400.2, one can see an
impact caused by this patchset. But doing five runs of the performance
tests where each one was run with GIT_PERF_REPEAT_COUNT=10, the overhead
ranged from -1.5% to +1.1%. These inconsistent performance numbers can
be explained by the overhead of spawning 3000 processes. This shows that
the overhead of assembling the hook path and executing access(3P) once
to check if it's there is mostly outweighed by the operating system's
overhead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignoring the sparse-checkout feature momentarily, if one has a submodule and
creates local branches within it with unpushed changes and maybe adds some
untracked files to it, then we would want to avoid accidentally removing such
a submodule. So, for example with git.git, if you run
git checkout v2.13.0
then the sha1collisiondetection/ submodule is NOT removed even though it
did not exist as a submodule until v2.14.0. Similarly, if you only had
v2.13.0 checked out previously and ran
git checkout v2.14.0
the sha1collisiondetection/ submodule would NOT be automatically
initialized despite being part of v2.14.0. In both cases, git requires
submodules to be initialized or deinitialized separately. Further, we
also have special handling for submodules in other commands such as
clean, which requires two --force flags to delete untracked submodules,
and some commands have a --recurse-submodules flag.
sparse-checkout is very similar to checkout, as evidenced by the similar
name -- it adds and removes files from the working copy. However, for
the same avoid-data-loss reasons we do not want to remove a submodule
from the working copy with checkout, we do not want to do it with
sparse-checkout either. So submodules need to be separately initialized
or deinitialized; changing sparse-checkout rules should not
automatically trigger the removal or vivification of submodules.
I believe the previous wording in git-sparse-checkout.txt about
submodules was only about this particular issue. Unfortunately, the
previous wording could be interpreted to imply that submodules should be
considered active regardless of sparsity patterns. Update the wording
to avoid making such an implication. It may be helpful to consider two
example situations where the differences in wording become important:
In the future, we want users to be able to run commands like
git clone --sparse=moduleA --recurse-submodules $REPO_URL
and have sparsity paths automatically set up and have submodules *within
the sparsity paths* be automatically initialized. We do not want all
submodules in any path to be automatically initialized with that
command.
Similarly, we want to be able to do things like
git -c sparse.restrictCmds grep --recurse-submodules $REV $PATTERN
and search through $REV for $PATTERN within the recorded sparsity
patterns. We want it to recurse into submodules within those sparsity
patterns, but do not want to recurse into directories that do not match
the sparsity patterns in search of a possible submodule.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preliminary clean-ups around refs API, plus file format
specification documentation for the reftable backend.
* hn/refs-cleanup:
reftable: define version 2 of the spec to accomodate SHA256
reftable: clarify how empty tables should be written
reftable: file format documentation
refs: improve documentation for ref iterator
t: use update-ref and show-ref to reading/writing refs
refs.h: clarify reflog iteration order
Document the usage for producing combined commits with "git diff".
This includes updating the synopsis section.
While here, add the three-dot notation to the synopsis.
Make "git diff -h" print the same usage summary as the manual
page synopsis, minus the "A..B" form, which is now discouraged.
Signed-off-by: Chris Torek <chris.torek@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current C Git implementation expects Git servers to follow a
specific order of sections when transmitting protocol v2 responses, but
this is not explicit in the documentation. Make the order explicit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach http-fetch the ability to download packfiles directly, given a
URL, and to verify them.
The http_pack_request suite has been augmented with a function that
takes a URL directly. With this function, the hash is only used to
determine the name of the temporary file.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add" takes special care to avoid creating a new worktree
at a location already registered to an existing worktree even if that
worktree is missing (which can happen, for instance, if the worktree
resides on removable media). "git worktree move", however, is not so
careful when validating the destination location and will happily move
the source worktree atop the location of a missing worktree. This leads
to the anomalous situation of multiple worktrees being associated with
the same path, which is expressly forbidden by design. For example:
$ git clone foo.git
$ cd foo
$ git worktree add ../bar
$ git worktree add ../baz
$ rm -rf ../bar
$ git worktree move ../baz ../bar
$ git worktree list
.../foo beefd00f [master]
.../bar beefd00f [bar]
.../bar beefd00f [baz]
$ git worktree remove ../bar
fatal: validation failed, cannot remove working tree:
'.../bar' does not point back to '.git/worktrees/bar'
Fix this shortcoming by enhancing "git worktree move" to perform the
same additional validation of the destination directory as done by "git
worktree add".
While at it, add a test to verify that "git worktree move" won't move a
worktree atop an existing (non-worktree) path -- a restriction which has
always been in place but was never tested.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Version appends a hash ID to the file header, making it slightly larger.
This commit also changes "SHA-1" into "object ID" in many places.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format allows for some ambiguity, as a lone footer also starts
with a valid file header. However, the current JGit code will barf on
this. This commit codifies this behavior into the standard.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn Pearce explains:
Some repositories contain a lot of references (e.g. android at 866k,
rails at 31k). The reftable format provides:
- Near constant time lookup for any single reference, even when the
repository is cold and not in process or kernel cache.
- Near constant time verification if a SHA-1 is referred to by at least
one reference (for allow-tip-sha1-in-want).
- Efficient lookup of an entire namespace, such as `refs/tags/`.
- Support atomic push `O(size_of_update)` operations.
- Combine reflog storage with ref storage.
This file format spec was originally written in July, 2017 by Shawn
Pearce. Some refinements since then were made by Shawn and by Han-Wen
Nienhuys based on experiences implementing and experimenting with the
format. (All of this was in the context of our work at Google and
Google is happy to contribute the result to the Git project.)
Imported from JGit[1]'s current version (c217d33ff,
"Documentation/technical/reftable: improve repo layout", 2020-02-04)
of Documentation/technical/reftable.md and converted to asciidoc by
running
pandoc -t asciidoc -f markdown reftable.md >reftable.txt
using pandoc 2.2.1. The result required the following additional
minor changes:
- removed the [TOC] directive to add a table of contents, since
asciidoc does not support it
- replaced git-scm.com/docs links with linkgit: directives that link
to other pages within Git's documentation
[1] https://eclipse.googlesource.com/jgit/jgit
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite support for GIT_CURL_VERBOSE in terms of GIT_TRACE_CURL.
Looking good.
* jt/curl-verbose-on-trace-curl:
http, imap-send: stop using CURLOPT_VERBOSE
t5551: test that GIT_TRACE_CURL redacts password
On-the-wire protocol v2 easily falls into a deadlock between the
remote-curl helper and the fetch-pack process when the server side
prematurely throws an error and disconnects. The communication has
been updated to make it more robust.
* dl/remote-curl-deadlock-fix:
stateless-connect: send response end packet
pkt-line: define PACKET_READ_RESPONSE_END
remote-curl: error on incomplete packet
pkt-line: extern packet_length()
transport: extract common fetch_pack() call
remote-curl: remove label indentation
remote-curl: fix typo
"git bugreport" learns to report what shell is in use.
* es/bugreport-shell:
bugreport: include user interactive shell
help: add shell-path to --build-options
While the MyFirstContribution guide exists and has received some use and
positive reviews, it is still not as discoverable as it could be. Add a
reference to it from the GitHub pull request template, where many
brand-new contributors may look. Also add a reference to it in
SubmittingPatches, which is the central source of guidance for patch
contribution.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph format specifies that "All 4-byte numbers are in
network order", but the commit-graph contains 8-byte integers as well
(file offsets in the Chunk Lookup table), and their byte order is
unspecified.
Clarify that all multi-byte integers are in network byte order.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0b4396f068 (git-p4: make python2.7 the oldest supported version,
2019-12-13), git-p4 was updated to only support 2.7 and newer. Since
Python 2.6 is pretty much ancient history, update CodingGuidelines to
show that 2.7 is the oldest version supported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In trace output (when GIT_TRACE_CURL is true), redact the values of all
HTTP cookies by default. Now that auth headers (since the implementation
of GIT_TRACE_CURL in 74c682d3c6 ("http.c: implement the GIT_TRACE_CURL
environment variable", 2016-05-24)) and cookie values (since this
commit) are redacted by default in these traces, also allow the user to
inhibit these redactions through an environment variable.
Since values of all cookies are now redacted by default,
GIT_REDACT_COOKIES (which previously allowed users to select individual
cookies to redact) now has no effect.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some repositories in the wild have commits that record nonsense
committer timezone (e.g. rails.git); "git fast-import" learned an
option to pass these nonsense timestamps intact to allow recreating
existing repositories as-is.
* en/fast-import-looser-date:
fast-import: add new --date-format=raw-permissive format
"feature.experimental" configuration variable is to let volunteers
easily opt into a set of newer features, which use of the v2
transport protocol is now a part of.
* jn/experimental-opts-into-proto-v2:
config: let feature.experimental imply protocol.version=2
There are multiple repositories in the wild with random, invalid
timezones. Most notably is a commit from rails.git with a timezone of
"+051800"[1]. A few searches will find other repos with that same
invalid timezone as well. Further, Peff reports that GitHub relaxed
their fsck checks in August 2011 to accept any timezone value[2], and
there have been multiple reports to filter-repo about fast-import
crashing while trying to import their existing repositories since they
had timezone values such as "-7349423" and "-43455309"[3].
The existing check on timezone values inside fast-import may prove
useful for people who are crafting fast-import input by hand or with a
new script. For them, the check may help them avoid accidentally
recording invalid dates. (Note that this check is rather simplistic and
there are still several forms of invalid dates that fast-import does not
check for: dates in the future, timezone values with minutes that are
not divisible by 15, and timezone values with minutes that are 60 or
greater.) While this simple check may have some value for those users,
other users or tools will want to import existing repositories as-is.
Provide a --date-format=raw-permissive format that will not error out on
these otherwise invalid timezones so that such existing repositories can
be imported.
[1] 4cf94979c9
[2] https://lore.kernel.org/git/20200521195513.GA1542632@coredump.intra.peff.net/
[3] https://github.com/newren/git-filter-repo/issues/88
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the object-format extension for protocol v2.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
show-index is capable of reading any possible index file whether or not
the index is inside a repository. However, because our index files lack
metadata about the hash algorithm in use, it's not possible to
autodetect the algorithm that a particular index file is using.
In order to allow us to read index files of any algorithm, let's set up
the .git directory gently so that we default to the algorithm for the
current repository, and add an --object-format option to allow users to
override this setting and continue to run show-index outside of a
repository altogether. Let's also document this new option so that
people can find it and use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the remote helper docs to document the object-format extensions
we will implement in remote-curl and the transport helper code shortly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To set the default hash algorithm you can set the `GIT_DEFAULT_HASH`
environment variable. In the documentation this variable is named
`GIT_DEFAULT_HASH_ALGORITHM`, which is incorrect.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation of the `--show-pulls` option added in commit 8d049e182e
("revision: --show-pulls adds helpful merges", 2020-04-10) consists of
several paragraphs and we use "+" throughout to tie them together in one
long chain of list continuations. Only thing is, we're not in any kind
of list, so these pluses end up being rendered literally.
The preceding few paragraphs describe `--ancestry-path` and there we
*do* have a list, since we've started one with `--ancestry-path::`. In
fact, we have several such lists for all the various history-simplifying
options we're discussing earlier in this file.
Thus, we're missing a list both from a consistency point of view and
from a practical rendering standpoint.
Let's start a list for `--show-pulls` where we start actually discussing
the option, and keep the paragraphs preceding it out of that list. That
is, drop all those pluses before the new list we're adding here.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building with asciidoc-8.4.5 (as found on CentOS/Red Hat 6), the
period in the "[[files-in-.gitignore-are-tracked]]" anchor is not
properly parsed as a section:
WARNING: gitfaq.txt: line 245: missing [[files-in-.gitignore-are-tracked]] section
The resulting XML file fails to validate with xmlto:
xmlto: /git/Documentation/gitfaq.xml does not validate (status 3)
xmlto: Fix document syntax or use --skip-validation option
/git/Documentation/gitfaq.xml:3: element refentry: validity error :
Element refentry content does not follow the DTD, expecting
(beginpage? , indexterm* , refentryinfo? , refmeta? , (remark | link
| olink | ulink)* , refnamediv+ , refsynopsisdiv? , (refsect1+ |
refsection+)), got (refmeta refnamediv refsynopsisdiv refsect1
refsect1 refsect1 refsect1 variablelist refsect1 refsect1 )
Document /git/Documentation/gitfaq.xml does not validate
Let's avoid breaking users of platforms which ship an old version of
asciidoc, since the cost to do so is quite low.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various doc fixes.
* ma/doc-fixes:
git-sparse-checkout.txt: add missing '
git-credential.txt: use list continuation
git-commit-graph.txt: fix list rendering
git-commit-graph.txt: fix grammo
date-formats.txt: fix list continuation
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated before the transaction is
complete, remote-curl will blindly forward the packets before waiting on
more input from fetch-pack. Meanwhile, fetch-pack will read the
transaction and continue reading, expecting more input to continue the
transaction. This results in a deadlock between the two processes.
This can be seen in the following command which does not terminate:
$ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
whereas the v1 version does terminate as expected:
$ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
fatal: the remote end hung up unexpectedly
Instead of blindly forwarding packets, make remote-curl insert a
response end packet after proxying the responses from the remote server
when using stateless_connect(). On the RPC client side, ensure that each
response ends as described.
A separate control packet is chosen because we need to be able to
differentiate between what the remote server sends and remote-curl's
control packets. By ensuring in the remote-curl code that a server
cannot send response end packets, we prevent a malicious server from
being able to perform a denial of service attack in which they spoof a
response end packet and cause the described deadlock to happen.
Reported-by: Force Charlie <charlieio@outlook.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first four bytes of the line, the pkt-len, indicates the total
length of the pkt-line in hexadecimal. Fix wrong pkt-len headers of
some pkt-line messages in `http-protocol.txt` and `pack-protocol.txt`.
Reviewed-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Jiuyang Xie <jiuyang.xjy@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.26 used protocol v2 as its default protocol, but soon after
release, users noticed that the protocol v2 negotiation code was prone
to fail when fetching from some remotes that are far ahead of others
(such as linux-next.git versus Linus's linux.git). That has been
fixed by 0b07eecf6e (Merge branch 'jt/v2-fetch-nego-fix',
2020-05-01), but to be cautious, we are using protocol v0 as the
default in 2.27 to buy some time for any other unanticipated issues to
surface.
To that end, let's ensure that users requesting the bleeding edge
using the feature.experimental flag *do* get protocol v2. This way,
we can gain experience with a wider audience for the new protocol
version and be more confident when it is time to enable it by default
for all users in some future Git version.
Implementation note: this isn't with the rest of the
feature.experimental options in repo-settings.c because those are tied
to a repository object, whereas this code path is used for operations
like "git ls-remote" that do not require a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Where we explain the 'reapply' command, we don't properly wrap it in
single quote marks like we do with the other commands: We omit the
closing mark ("'reapply") and this ends up being rendered literally as
"'reapply". Add the missing "'".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use list continuation to avoid the second and third paragraphs
rendering with a different indentation from the first one where we
describe the "url" attribute.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first list item follows immediately on the paragraph where we
introduce the list. This makes the "*" render literally as part of one
huge paragraph. (With AsciiDoc, everything is fine after that, but with
Asciidoctor, we get some minor follow-on errors.) Add an empty line --
with a list continuation ("+") -- to make the first list item render ok.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to mix up the possessive "its" and "it's" ("it is"). Correct
an instance of this.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The blank line before the lone "+" means it isn't detected as a list
continuation, but instead renders literally, at least with AsciiDoc.
Drop the empty line and, while at it, add a closing period to the
preceding paragraph.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strftime(3) man page is outside of the Git suite. Refererence it as
we do other external man pages and avoid creating a broken link when
generating the HTML documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7c5c9b9c57 (commit-graph: error out on invalid commit oids in
'write --stdin-commits', 2019-08-05), the commit-graph builtin dies on
receiving non-commit OIDs as input to '--stdin-commits'.
This behavior can be cumbersome to work around in, say, the case of
piping 'git for-each-ref' to 'git commit-graph write --stdin-commits' if
the caller does not want to cull out non-commits themselves. In this
situation, it would be ideal if 'git commit-graph write' wrote the graph
containing the inputs that did pertain to commits, and silently ignored
the remainder of the input.
Some options have been proposed to the effect of '--[no-]check-oids'
which would allow callers to have the commit-graph builtin do just that.
After some discussion, it is difficult to imagine a caller who wouldn't
want to pass '--no-check-oids', suggesting that we should get rid of the
behavior of complaining about non-commit inputs altogether.
If callers do wish to retain this behavior, they can easily work around
this change by doing the following:
git for-each-ref --format='%(objectname) %(objecttype) %(*objecttype)' |
awk '
!/commit/ { print "not-a-commit:"$1 }
/commit/ { print $1 }
' |
git commit-graph write --stdin-commits
To make it so that valid OIDs that refer to non-existent objects are
indeed an error after loosening the error handling, perform an extra
lookup to make sure that object indeed exists before sending it to the
commit-graph internals.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup and typofixes
* ds/bloom-cleanup:
completion: offer '--(no-)patch' among 'git log' options
bloom: use num_changes not nr for limit detection
bloom: de-duplicate directory entries
Documentation: changed-path Bloom filters use byte words
bloom: parse commit before computing filters
test-bloom: fix usage typo
bloom: fix whitespace around tab length
Document a capability that indicates which hash algorithms are in use by
both sides of a remote connection. Use the term "object-format", since
this is the term used for the repository extension as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor in-code comments and documentation updates around credential
API.
* cb/credential-doc-fixes:
credential: document protocol updates
credential: update gitcredentials documentation
credential: correct order of parameters for credential_match
credential: update description for credential_from_url_gently
It's possible a user may complain about the way that Git interacts with
their interactive shell, e.g. autocompletion or shell prompt. In that
case, it's useful for us to know which shell they're using
interactively.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever GIT_CURL_VERBOSE is set, teach Git to behave as if
GIT_TRACE_CURL=1 and GIT_TRACE_CURL_NO_DATA=1 is set, instead of setting
CURLOPT_VERBOSE.
This is to prevent inadvertent revelation of sensitive data. In
particular, GIT_CURL_VERBOSE redacts neither the "Authorization" header
nor any cookies specified by GIT_REDACT_COOKIES.
Unifying the tracing mechanism also has the future benefit that any
improvements to the tracing mechanism will benefit both users of
GIT_CURL_VERBOSE and GIT_TRACE_CURL, and we do not need to remember to
implement any improvement twice.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Documentation/technical/commit-graph-format.txt, the definition
of the BIDX chunk specifies the length is a number of 8-byte words.
During development we discovered that using 8-byte words in the
Murmur3 hash algorithm causes issues with big-endian versus little-
endian machines. Thus, the hash algorithm was adapted to work on a
byte-by-byte basis. However, this caused a change in the definition
of a "word" in bloom.h. Now, a "word" is a single byte, which allows
filters to be as small as two bytes. These length-two filters are
demonstrated in t0095-bloom.sh, and a larger filter of length 25 is
demonstrated as well.
The original point of using 8-byte words was for alignment reasons.
It also presented opportunities for extremely sparse Bloom filters
when there were a small number of changes at a commit, creating a
very low false-positive rate. However, modifying the format at this
point is unlikely to be a valuable exercise. Also, this use of
single-byte granularity does present opportunities to save space.
It is unclear if 8-byte alignment of the filters would present any
meaningful performance benefits.
Modify the format document to reflect reality.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When selecting a batch of pack-files to repack in the "git
multi-pack-index repack" command, Git should respect the
repack.packKeptObjects config option. When false, this option says that
the pack-files with an associated ".keep" file should not be repacked.
This config value is "false" by default.
There are two cases for selecting a batch of objects. The first is the
case where the input batch-size is zero, which specifies "repack
everything". The second is with a non-zero batch size, which selects
pack-files using a greedy selection criteria. Both of these cases are
updated and tested.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
