The mess known as the progress meter in merge-recursive was my own
fault; I put it in thinking that we might be spending a lot of time
resolving unmerged entries in the index that were not handled by
the simple 3-way index merge code.
Turns out we don't really spend that much time there, so the progress
meter was pretty much always jumping to "(n/n) 100%" as soon as
the program started. That isn't a very good indication of progress.
Since I don't have a great solution for how a progress meter should
work here, I'm proposing we back it out entirely.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a description of the commit to the reflog using the first line of
the log message, the same way the git-commit script does it.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm using a variant of this update hook in a corporate environment
where we perform some validations of the commits and tags that
are being pushed. The model is a "central repository" type setup,
where users are given access to push to specific branches within
the shared central repository. In this particular installation we
run a specially patched git-receive-pack in setuid mode via SSH,
allowing all writes into the repository as the repository owner,
but only if this hook blesses it.
One of the major checks we perform with this hook is that the
'committer' line of a commit, or the 'tagger' line of a new annotated
tag actually correlates to the UNIX user who is performing the push.
Users can falsify these lines on their local repositories, but
the central repository that management trusts will reject all such
forgery attempts. Of course 'author' lines are still allowed to
be any value, as sometimes changes do come from other individuals.
Another nice feature of this hook is the access control lists for
all repositories on the system can also be stored and tracked in
a supporting Git repository, which can also be access controlled
by itself. This allows full auditing of who-had-what-when-and-why,
thanks to git-blame's data mining capabilities.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Alex Riesen noticed that the case where a file replaced a directory entry
in the working tree was broken on cygwin. It turns out that the code made
some Linux-specific assumptions, and also ignored errors entirely for the
case where the entry was a symlink rather than a file.
This cleans it up by separating out the common case into a function of its
own, so that both regular files and symlinks can share it, and by making
the error handling more obvious (and not depend on any Linux-specific
behaviour).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the semantics of 'crlf' so that .gitattributes file
can say "this is text, even though it may look funny".
Setting the `crlf` attribute on a path is meant to mark the path
as a "text" file. 'core.autocrlf' conversion takes place
without guessing the content type by inspection.
Unsetting the `crlf` attribute on a path is meant to mark the
path as a "binary" file. The path never goes through line
endings conversion upon checkin/checkout.
Unspecified `crlf` attribute tells git to apply the
`core.autocrlf` conversion when the file content looks like
text.
Setting the `crlf` attribut to string value "input" is similar
to setting the attribute to `true`, but also forces git to act
as if `core.autocrlf` is set to `input` for the path.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-config.txt: Added documentation for --system
Documentation/builtin-config.c: Added --system to the short usage
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In asciidoc 7.1.2 and prior there is no obvious way to get:
'add'ing
to emphasize only the "add", instead it treats the first apostrophe as the
beginning of an emphasis, and the second apostrophe as a regular
apostrophe and makes the rest of the line an emphasis since there is no
closing apostrophe. In the newer asciidoc you can do it pretty easily
with __add__ing but I'm not sure it would be best to make that a prereq
for something as silly as this.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-cherry-pick.txt: Remove --replay as it is not
handled by the code (-r is however).
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-archive.txt: Document -v/--verbose option.
Add -l as short form of --list.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Two scanf() calls were converted to strtoul_ui() but the return
values were not updated to match. scanf() returns the number of
matched "values" which for this usage is 1 on success. strtoul_ui()
return 0 on success. Update these call sites to match.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no need to intern the string to git_attr, as we are already
dealing with the name of the driver there.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the configuration has variables unrelated to low-level
merge drivers (e.g. merge.summary), the code failed to ignore
them but did something totally senseless.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a set of radiobuttons that select between displaying the full
diff (both - and + lines), the old file (suppressing the + lines) and the
new file (suppressing the - lines) in the diff display window.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The following tests available:
- create subprojects: create a directory in the superproject,
initialize a git repo in it, and try adding it in super project.
Make a commit in superproject
- check if fsck ignores the subprojects: it just should give no errors
- check if commit in a subproject detected: make a commit in
subproject, git-diff-files in superproject should detect it
- check if a changed subproject HEAD can be committed: try
"git-commit -a" in superproject. It should commit changed
HEAD of a subproject
- check if diff-index works for subproject elements: compare the index
(changed by previuos tests) with the initial commit (which created
two subprojects). Should show a change for the recently changed subproject
- check if diff-tree works for subproject elements: do the same, just use
git-diff-tree. This test is somewhat redundant, I just added it for
completeness (diff, diff-files, and diff-index are already used)
- check if git diff works for subproject elements: try to limit
the diff for the name of a subproject in superproject:
git diff HEAD^ HEAD -- subproject
- check if clone works: try a clone of superproject and compare
"git ls-files -s" output in superproject and cloned repo
- removing and adding subproject: rename test. Currently implemented
as "git-update-index --force-remove", "mv" and "git-add".
- checkout in superproject: try to checkout the initial commit
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rather than sorting the refs list while building it, sort in one
go after it is built using a merge sort. This has a large
performance boost with large numbers of refs.
It shouldn't happen that we read duplicate entries into the same
list, but just in case sort_ref_list drops them if the SHA1s are
the same, or dies, as we have no way of knowing which one is the
correct one.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-shortlog: Fix two formatting errors in asciidoc documentation
Fix overwriting of files when applying contextually independent diffs
git-svn: don't allow globs to match regular files
It was bothering me a lot that I abused small integer values
casted to (void *) to represent non string values in
gitattributes. This corrects it by making the type of attribute
values (const char *), and using the address of a few statically
allocated character buffer to denote true/false. Unset attributes
are represented as having NULLs as their values.
Added in-header documentation to explain how git_checkattr()
routine should be called.
Signed-off-by: Junio C Hamano <junkio@cox.net>
First use [verse] in the SYNOPSIS so that the line break actually
shows.
Secondly drop the quotes around '.mailmap' since this exposes
a bug in our toolchain (didn't bother enough yet to find out wether
it is asciidoc's fault or that of the XSL templates) that leads to
the dot not getting escaped correctly in the roff output and thereby
swallowing the line.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by applying two diffs of different contexts to the same file.
The check for existence of a file was wrong: the test assumed it was
a directory and reset the errno (twice: directly and by calling
lstat). So if an entry existed and was _not_ a directory no attempt
was made to rename into it, because the errno (expected by renaming
code) was already reset to 0. This resulted in error:
fatal: unable to write file file mode 100644
For Linux, removing "errno = 0" is enough, as lstat wont modify errno
if it was successful. The behavior should not be depended upon,
though, so modify the "if" as well.
The test simulates this situation.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git only tracks the histories of full directories, not
that of individual files. Sometimes, SVN users will
place[1] a regular file in the directory designated
for subdirectories of branches or tags.
Thanks to jrockway on #git for pointing this out.
[1] mistakenly or otherwise, such as a README
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows [merge "drivername"] to have a variable "recursive"
that names a different low-level merge driver to be used when
merging common ancestors to come up with a virtual ancestor.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the configuration syntax for defining a low-level
merge driver to be:
[merge "<<drivername>>"]
driver = "<<command line>>"
name = "<<driver description>>"
which is much nicer to read and is extensible. Credit goes to
Martin Waitz and Linus.
In addition, when we use an external low-level merge driver, it
is reported as an extra output from merge-recursive, using the
value of merge.<<drivername>.name variable.
The demonstration in t6026 has also been updated.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When no 'merge' attribute is given to a path, merge-recursive
uses the built-in xdl-merge as the low-level merge driver.
A new configuration item 'merge.default' can name a low-level
merge driver of user's choice to be used instead.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows users to specify custom low-level merge driver per
path, using the attributes mechanism. Just like you can specify
one of built-in "text", "binary", "union" low-level merge
drivers by saying:
* merge=text
.gitignore merge=union
*.jpg merge=binary
pick a name of your favorite merge driver, and assign it as the
value of the 'merge' attribute.
A custom low-level merge driver is defined via the config
mechanism. This patch introduces 'merge.driver', a multi-valued
configuration. Its value is the name (i.e. the one you use as
the value of 'merge' attribute) followed by a command line
specification. The command line can contain %O, %A, and %B to
be interpolated with the names of temporary files that hold the
common ancestor version, the version from your branch, and the
version from the other branch, and the resulting command is
spawned.
The low-level merge driver is expected to update the temporary
file for your branch (i.e. %A) with the result and exit with
status 0 for a clean merge, and non-zero status for a conflicted
merge.
A new test in t6026 demonstrates a sample usage.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fl/cvsserver:
config.txt: Add gitcvs.db* variables
cvsserver: Document the GIT branches -> CVS modules mapping more prominently
cvsserver: Reword documentation on necessity of write access
cvsserver: Allow to "add" a removed file
cvsserver: Add asciidoc documentation for new database backend configuration
cvsserver: Corrections to the database backend configuration
cvsserver: Use DBI->table_info instead of DBI->tables
cvsserver: Abort if connect to database fails
cvsserver: Make the database backend configurable
cvsserver: Allow to override the configuration per access method
cvsserver: Handle three part keys in git config correctly
cvsserver: Introduce new state variable 'method'
Conflicts:
Documentation/config.txt
delete_ref function does not change the 'sha1' parameter. Non-const pointer
causes a compiler warning if you call to the function using a const argument.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Start preparing for 1.5.1.2
git-svn: quiet some warnings when run only with --version/--help
git-svn: respect lower bound of -r/--revision when following parent
Conflicts:
RelNotes
* 'master' of git://repo.or.cz/git-gui:
git-gui: Honor TCLTK_PATH if supplied
Revert "Allow wish interpreter to be defined with TCLTK_PATH"
git-gui: Display the directory basename in the title
git-gui: Brown paper bag fix division by 0 in blame
Always bind the return key to the default button
Do not break git-gui messages into multiple lines.
Improve look-and-feel of the git-gui tool.
Teach git-gui to use the user-defined UI font everywhere.
Allow wish interpreter to be defined with TCLTK_PATH
* jc/read-tree-df:
t3030: merge-recursive backend test.
merge-recursive: handle D/F conflict case more carefully.
merge-recursive: do not barf on "to be removed" entries.
Treat D/F conflict entry more carefully in unpack-trees.c::threeway_merge()
t1000: fix case table.
This demonstrates how the new low-level per-path merge backends,
union and ours, work, and shows how they are controlled by the
gitattribute mechanism.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows 'merge' attribute to control how the file-level
three-way merge is done per path.
- If you set 'merge' to true, leave it unspecified, or set it
to "text", we use the built-in 3-way xdl-merge.
- If you set 'merge' to false, or set it to "binary, the
"binary" merge is done. The merge result is the blob from
'our' tree, but this still leaves the path conflicted, so
that the mess can be sorted out by the user. This is
obviously meant to be useful for binary files.
- 'merge=union' (this is the first example of a string valued
attribute, introduced in the previous one) uses the "union"
merge. The "union" merge takes lines in conflicted hunks
from both sides, which is useful for line-oriented files such
as .gitignore.
Instead fo setting merge to 'true' or 'false' by using 'merge'
or '-merge', setting it explicitly to "text" or "binary" will
become useful once we start allowing custom per-path backends to
be added, and allow them to be activated for the default
(i.e. 'merge' attribute specified to 'true' or 'false') case,
using some other mechanisms. Setting merge attribute to "text"
or "binary" will be a way to explicitly request to override such
a custom default for selected paths.
Currently there is no way to specify random programs but it
should be trivial for motivated contributors to add later.
There is one caveat, though. ll_merge() is called for both
internal ancestor merge and the outer "final" merge. I think an
interactive custom per-path merge backend should refrain from
going interactive when performing an internal merge (you can
tell it by checking call_depth) and instead just call either
ll_xdl_merge() if the content is text, or call ll_binary_merge()
otherwise.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mimick what we do for gitk. Since you do have a source file,
git-gui.sh, which is separate from the target, it should be much
easier in git-gui's Makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This reverts commit e2a1bc67d3.
Junio rightly pointed out this patch doesn't handle the
`make install` target very well:
Junio C Hamano <junkio@cox.net> writes:
> You should never generate new files in the source tree from
> 'install' target. Otherwise, the usual pattern of "make" as
> yourself and then "make install" as root would not work from a
> "root-to-nobody-squashing" NFS mounted source tree to local
> filesystem. You should know better than accepting such a patch.
These are harmless but annoying. They were introduced in
512b620bd9
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When an explicit --revision argument is specified, do not fetch
past the specified range into the beginning of history.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to define three values (and possibly more) to
each attribute: true, false, and unset.
Typically the handlers that notice and act on attribute values
treat "unset" attribute to mean "do your default thing"
(e.g. crlf that is unset would trigger "guess from contents"),
so being able to override a setting to an unset state is
actually useful.
- If you want to set the attribute value to true, have an entry
in .gitattributes file that mentions the attribute name; e.g.
*.o binary
- If you want to set the attribute value explicitly to false,
use '-'; e.g.
*.a -diff
- If you want to make the attribute value _unset_, perhaps to
override an earlier entry, use '!'; e.g.
*.a -diff
c.i.a !diff
This also allows string values to attributes, with the natural
syntax:
attrname=attrvalue
but you cannot use it, as nobody takes notice and acts on
it yet.
Signed-off-by: Junio C Hamano <junkio@cox.net>
