"feature.experimental" configuration variable is to let volunteers
easily opt into a set of newer features, which use of the v2
transport protocol is now a part of.
* jn/experimental-opts-into-proto-v2:
config: let feature.experimental imply protocol.version=2
To set the default hash algorithm you can set the `GIT_DEFAULT_HASH`
environment variable. In the documentation this variable is named
`GIT_DEFAULT_HASH_ALGORITHM`, which is incorrect.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation of the `--show-pulls` option added in commit 8d049e182e
("revision: --show-pulls adds helpful merges", 2020-04-10) consists of
several paragraphs and we use "+" throughout to tie them together in one
long chain of list continuations. Only thing is, we're not in any kind
of list, so these pluses end up being rendered literally.
The preceding few paragraphs describe `--ancestry-path` and there we
*do* have a list, since we've started one with `--ancestry-path::`. In
fact, we have several such lists for all the various history-simplifying
options we're discussing earlier in this file.
Thus, we're missing a list both from a consistency point of view and
from a practical rendering standpoint.
Let's start a list for `--show-pulls` where we start actually discussing
the option, and keep the paragraphs preceding it out of that list. That
is, drop all those pluses before the new list we're adding here.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building with asciidoc-8.4.5 (as found on CentOS/Red Hat 6), the
period in the "[[files-in-.gitignore-are-tracked]]" anchor is not
properly parsed as a section:
WARNING: gitfaq.txt: line 245: missing [[files-in-.gitignore-are-tracked]] section
The resulting XML file fails to validate with xmlto:
xmlto: /git/Documentation/gitfaq.xml does not validate (status 3)
xmlto: Fix document syntax or use --skip-validation option
/git/Documentation/gitfaq.xml:3: element refentry: validity error :
Element refentry content does not follow the DTD, expecting
(beginpage? , indexterm* , refentryinfo? , refmeta? , (remark | link
| olink | ulink)* , refnamediv+ , refsynopsisdiv? , (refsect1+ |
refsection+)), got (refmeta refnamediv refsynopsisdiv refsect1
refsect1 refsect1 refsect1 variablelist refsect1 refsect1 )
Document /git/Documentation/gitfaq.xml does not validate
Let's avoid breaking users of platforms which ship an old version of
asciidoc, since the cost to do so is quite low.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various doc fixes.
* ma/doc-fixes:
git-sparse-checkout.txt: add missing '
git-credential.txt: use list continuation
git-commit-graph.txt: fix list rendering
git-commit-graph.txt: fix grammo
date-formats.txt: fix list continuation
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first four bytes of the line, the pkt-len, indicates the total
length of the pkt-line in hexadecimal. Fix wrong pkt-len headers of
some pkt-line messages in `http-protocol.txt` and `pack-protocol.txt`.
Reviewed-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Jiuyang Xie <jiuyang.xjy@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git 2.26 used protocol v2 as its default protocol, but soon after
release, users noticed that the protocol v2 negotiation code was prone
to fail when fetching from some remotes that are far ahead of others
(such as linux-next.git versus Linus's linux.git). That has been
fixed by 0b07eecf6e (Merge branch 'jt/v2-fetch-nego-fix',
2020-05-01), but to be cautious, we are using protocol v0 as the
default in 2.27 to buy some time for any other unanticipated issues to
surface.
To that end, let's ensure that users requesting the bleeding edge
using the feature.experimental flag *do* get protocol v2. This way,
we can gain experience with a wider audience for the new protocol
version and be more confident when it is time to enable it by default
for all users in some future Git version.
Implementation note: this isn't with the rest of the
feature.experimental options in repo-settings.c because those are tied
to a repository object, whereas this code path is used for operations
like "git ls-remote" that do not require a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Where we explain the 'reapply' command, we don't properly wrap it in
single quote marks like we do with the other commands: We omit the
closing mark ("'reapply") and this ends up being rendered literally as
"'reapply". Add the missing "'".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use list continuation to avoid the second and third paragraphs
rendering with a different indentation from the first one where we
describe the "url" attribute.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first list item follows immediately on the paragraph where we
introduce the list. This makes the "*" render literally as part of one
huge paragraph. (With AsciiDoc, everything is fine after that, but with
Asciidoctor, we get some minor follow-on errors.) Add an empty line --
with a list continuation ("+") -- to make the first list item render ok.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to mix up the possessive "its" and "it's" ("it is"). Correct
an instance of this.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The blank line before the lone "+" means it isn't detected as a list
continuation, but instead renders literally, at least with AsciiDoc.
Drop the empty line and, while at it, add a closing period to the
preceding paragraph.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strftime(3) man page is outside of the Git suite. Refererence it as
we do other external man pages and avoid creating a broken link when
generating the HTML documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup and typofixes
* ds/bloom-cleanup:
completion: offer '--(no-)patch' among 'git log' options
bloom: use num_changes not nr for limit detection
bloom: de-duplicate directory entries
Documentation: changed-path Bloom filters use byte words
bloom: parse commit before computing filters
test-bloom: fix usage typo
bloom: fix whitespace around tab length
Minor in-code comments and documentation updates around credential
API.
* cb/credential-doc-fixes:
credential: document protocol updates
credential: update gitcredentials documentation
credential: correct order of parameters for credential_match
credential: update description for credential_from_url_gently
In Documentation/technical/commit-graph-format.txt, the definition
of the BIDX chunk specifies the length is a number of 8-byte words.
During development we discovered that using 8-byte words in the
Murmur3 hash algorithm causes issues with big-endian versus little-
endian machines. Thus, the hash algorithm was adapted to work on a
byte-by-byte basis. However, this caused a change in the definition
of a "word" in bloom.h. Now, a "word" is a single byte, which allows
filters to be as small as two bytes. These length-two filters are
demonstrated in t0095-bloom.sh, and a larger filter of length 25 is
demonstrated as well.
The original point of using 8-byte words was for alignment reasons.
It also presented opportunities for extremely sparse Bloom filters
when there were a small number of changes at a commit, creating a
very low false-positive rate. However, modifying the format at this
point is unlikely to be a valuable exercise. Also, this use of
single-byte granularity does present opportunities to save space.
It is unclear if 8-byte alignment of the filters would present any
meaningful performance benefits.
Modify the format document to reflect reality.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When selecting a batch of pack-files to repack in the "git
multi-pack-index repack" command, Git should respect the
repack.packKeptObjects config option. When false, this option says that
the pack-files with an associated ".keep" file should not be repacked.
This config value is "false" by default.
There are two cases for selecting a batch of objects. The first is the
case where the input batch-size is zero, which specifies "repack
everything". The second is with a non-zero batch size, which selects
pack-files using a greedy selection criteria. Both of these cases are
updated and tested.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git restore --staged --worktree" now defaults to take the contents
out of "HEAD", instead of erring out.
* es/restore-staged-from-head-by-default:
restore: default to HEAD when combining --staged and --worktree
The coding guideline for shell scripts instructed to refer to a
variable with dollar-sign inside arithmetic expansion to work
around a bug in old versions of dash, which is a thing of the past.
Now we are not forbidden from writing $((var+1)).
* jk/arith-expansion-coding-guidelines:
CodingGuidelines: drop arithmetic expansion advice to use "$x"
The samples in the credential documentation has been updated to
make it clear that we depict what would appear in the .git/config
file, by adding appropriate quotes as needed..
* jk/credential-sample-update:
gitcredentials(7): make shell-snippet example more realistic
gitcredentials(7): clarify quoting of helper examples
With the recent tightening of the code that is used to parse
various parts of a URL for use in the credential subsystem, a
hand-edited credential-store file causes the credential helper to
die, which is a bit too harsh to the users. Demote the error
behaviour to just ignore and keep using well-formed lines instead.
* cb/credential-store-ignore-bogus-lines:
credential-store: ignore bogus lines from store file
credential-store: document the file format a bit more
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Occasionally a failure a user is seeing may be related to a specific
hook which is being run, perhaps without the user realizing. While the
contents of hooks can be sensitive - containing user data or process
information specific to the user's organization - simply knowing that a
hook is being run at a certain stage can help us to understand whether
something is going wrong.
Without a definitive list of hook names within the code, we compile our
own list from the documentation. This is likely prone to bitrot, but
designing a single source of truth for acceptable hooks is too much
overhead for this small change to the bugreport tool.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document protocol changes after CVE-2020-11008, including the removal of
references to the override of attributes which is no longer recommended
after CVE-2020-5260 and that might be removed in the future.
While at it do some improvements for clarity and consistency.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the expected effect of all attributes and how the helpers
are expected to handle them and the context where they operate.
While at it, space the descriptions for clarity, and add a paragraph
mentioning the early termination in the list processing of helpers,
to complement the one about the special "quit" attribute.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an issue in 'Common Issues' section which addresses the confusion
between performing a 'fetch' and a 'pull'.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitcredentials(7) already mentions several possible invocations that one
can use as the value for credential.helper. However, many people are
not aware that there are other options than a simple credential helper
name, so let's place some explanatory text in the documentation for
credential.helper as well.
We still refer the user to gitcredential(7) for additional explanations
and helpful examples.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add issue in 'Common Issues' section which addresses the problem of
Git tracking files/paths mentioned in '.gitignore'.
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In documentation pertaining to autostash behavior, we refer to the
"stash reflog". This description is too low-level as the reflog refers
to an implementation detail of how the stash works and, for end-users,
they do not need to be aware of this at all.
Change references of "stash reflog" to "stash list", which should
provide more accessible terminology for end-users.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
