We create 50,000 tags to check that we don't overflow the
command-line of fetch-pack. But by using run_with_cmdline_limit,
we can get the same effect with a much smaller number of
tags. This makes the test fast enough that we can drop the
EXPENSIVE prereq, which means people will actually run it.
It was not documented to do so, but this test was also the
only test of a clone-over-http that requires multiple POSTs
during the conversation. We can continue to test that by
dropping http.postbuffer to its minimum size, and checking
that we get two POSTs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use this to test http pushing with a restricted
commandline. Other scripts (like t5551, which does http
fetching) will want to use it, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apache removes GIT_TRACE from the environment before running
git-http-backend. This can make it hard to debug the server
side of an http session. Let's let it through.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run a test script like:
GIT_TRACE=1 ./t0061-run-command.sh
you may get test failures, because some tests capture and
check the stderr output from git commands (and with
GIT_TRACE set to 1, the trace output will be included
there).
When we see GIT_TRACE set like this, we print a warning to
the user. However, we can do even better than that by just
pointing it to descriptor 4, which all tests leave connected
to the test script's stderr. That's likely what the user
intended (and any scripts that do want to see GIT_TRACE
output will set GIT_TRACE themselves).
Not only does this avoid false negatives in the tests, but
it means the user will actually see trace output for git
calls that redirect their stderr (whereas before, it was
sometimes confusingly buried in a file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now if a test script receives SIGINT (e.g., because a
test was hanging and the user hit ^C), the shell exits
immediately. This can be annoying if the test script did any
global setup, like starting apache or git-daemon, as it will
not have an opportunity to clean up after itself. A
subsequent run of the test won't be able to start its own
daemon, and will either fail or skip the tests.
Instead, let's trap SIGINT to make sure we do a clean
shutdown, and just chain it to a normal exit (which will
trigger any cleanup).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We check whether the return value of lookup_unknown_object
is NULL, but some code paths dereference it before our
check. This turns out not to be capable of causing a
segfault, though. The lookup_unknown_object function will
never return NULL, since the whole point is to allocate an
object struct if it does not find an existing one. So the
code here is not wrong, it is just confusing. Let's just
drop the NULL check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack advertises the refs (either for a normal,
non-stateless request, or for the initial contact in a
stateless one), we call for_each_ref with the send_ref
function as its callback. send_ref, in turn, calls
mark_our_ref, which checks whether the ref is hidden, and
sets OUR_REF or HIDDEN_REF on the object as appropriate. If
it is hidden, mark_our_ref also returns "1" to signal
send_ref that the ref should not be advertised.
If we are not advertising refs, (i.e., the follow-up
invocation by an http client to send its "want" lines), we
use mark_our_ref directly as a callback to for_each_ref. Its
marking does the right thing, but when it then returns "1"
to for_each_ref, the latter interprets this as an error and
stops iterating. As a result, we skip marking all of the
refs that come lexicographically after it. Any "want" lines
from the client asking for those objects will fail, as they
were not properly marked with OUR_REF.
To solve this, we introduce a wrapper callback around
mark_our_ref which always returns 0 (even if the ref is
hidden, we want to keep iterating). We also tweak the
signature of mark_our_ref to exclude unnecessary parameters
that were present only to conform to the callback interface.
This should make it less likely for somebody to accidentally
use it as a callback in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git tag -h" currently prints:
[...]
Tag creation options
[...]
--column[=<style>] show tag list in columns
--sort <type> sort tags
Tag listing options
--contains <commit> print only tags that contain the commit
--points-at <object> print only tags of the object
The "--column" and "--sort" options should go under the "Tag listing" group.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was one continue statement without an accompanying `free(ref)`.
Instead of adding that, replace all the free&&continue with a goto
just after writing the refs, where we'd do the free anyway and then
reloop.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the standard function isxdigit() to make the intent clearer and
avoid using magic constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git_connect() is called to see how the URL is parsed for
debugging purposes with CONNECT_DIAG_URL set, the variable conn is
leaked. At this point in the codeflow, it only has its memory and
no other resource is associated with it, so it is sufficient to
clean it up by just freeing it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: "Mladen B." <mladen074@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on how gpg was built, it may issue the following
message to stderr when run:
Warning: using insecure memory!
When the test is collecting gpg output it is therefore not
enough to just match on a "gpg: " prefix it must also match
on a "Warning: " prefix wherever it needs to match lines
that have been produced by gpg.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FreeBSD shell converts this expression:
git ${1:+-c push.default="$1"} push
to this when "$1" is not empty:
git "-c push.default=$1" push
which causes git to fail. To avoid this we simply break up the
expansion into two parts so that the whitespace which creates
two arguments instead of one is outside the ${...} like so:
git ${1:+-c} ${1:+push.default="$1"} push
This has the desired effect on all platforms allowing the test
to pass on FreeBSD.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If both USE_CURL_FOR_IMAP_SEND and NO_OPENSSL are defined do
not force the user to add --curl to get a working git imap-send
command.
Instead automatically select --curl and warn and ignore the
--no-curl option. And while we're in there, correct the
warning message when --curl is requested but not supported.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, log decorations do not indicate which branch is checked out
and whether HEAD is detached.
When branch foo is checked out, change the "HEAD, foo" part of the
decorations to "HEAD -> foo". This serves to indicate both ref
decorations (helped by the spacing) as well as their relationshsip.
As a consequence, "HEAD" without any " -> " denotes a detached HEAD now.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/decorate-leaky-separator-color:
log --decorate: do not leak "commit" color into the next item
Documentation/config.txt: simplify boolean description in the syntax section
Documentation/config.txt: describe 'color' value type in the "Values" section
Documentation/config.txt: have a separate "Values" section
Documentation/config.txt: describe the structure first and then meaning
Documentation/config.txt: explain multi-valued variables once
Documentation/config.txt: avoid unnecessary negation
Not all systems support using sysconf to detect the number
of available CPU cores. Older BSD and BSD-derived systems
only provide the information via the sysctl function.
If HAVE_BSD_SYSCTL is defined attempt to retrieve the number
of available CPU cores using the sysctl function.
If HAVE_BSD_SYSCTL is not defined or the sysctl function
fails, we still attempt to get the information via sysconf.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On BSD-compatible systems some information such as the number
of available CPUs may only be available via the sysctl function.
Add support for a HAVE_BSD_SYSCTL option complete with autoconf
support and include the sys/syctl.h header when the option is
enabled to make the sysctl function available.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has set SHELL_PATH in the Makefile then we
should respect that value and use it.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If SHELL_PATH is not defined we use "/bin/sh". However,
run-command.c is not the only file that needs to use
the default value so move it into a common header.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has configured a value for SHELL_PATH then
be sure to use it for any generated scripts instead of
hard-coding /bin/sh.
The first line of the script is handled specially, but
the embedded #!/bin/sh line in the here document will
not be automatically updated unless it uses @SHELL_PATH@.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various issues around "reflog expire", e.g. using --updateref when
expiring a reflog for a symbolic reference, have been corrected
and/or made saner.
* mh/expire-updateref-fixes:
reflog_expire(): never update a reference to null_sha1
reflog_expire(): ignore --updateref for symbolic references
reflog: improve and update documentation
struct ref_lock: delete the force_write member
lock_ref_sha1_basic(): do not set force_write for missing references
write_ref_sha1(): move write elision test to callers
write_ref_sha1(): remove check for lock == NULL
A corrupt input to "git diff -M" can cause us to segfault.
* jk/diffcore-rename-duplicate:
diffcore-rename: avoid processing duplicate destinations
diffcore-rename: split locate_rename_dst into two functions
Move the variables related to the client-supplied hostname into its own
struct, let execute() own an instance of that instead of storing the
information in global variables and pass the struct to any function that
needs to access it as a parameter.
The lifetime of the variables is easier to see this way. Allocated
memory is released within execute(). The strbufs don't have to be reset
anymore because they are written to only once at most: parse_host_arg()
is only called once by execute() and lookup_hostname() guards against
being called twice using hostname_lookup_done.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert hostname, canon_hostname, ip_address and tcp_port to strbuf.
This allows to get rid of the helpers strbuf_addstr_or_null() and STRARG
because a strbuf always represents a valid (initially empty) string.
sanitize_client() is not needed anymore and sanitize_client_strbuf()
takes its place and name.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git -C ""' unhelpfully dies with error "Cannot change to ''",
whereas the shell treats `cd ""' as a no-op. Taking the shell's
behavior as a precedent, teach git to treat `-C ""' as a no-op, as
well.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The borrowed code in kwset API did not follow our usual convention
to use "unsigned char" to store values that range from 0-255.
* bw/kwset-use-unsigned:
kwset: use unsigned char to store values with high-bit set
The interaction between "git submodule update" and the
submodule.*.update configuration was not clearly documented.
* ms/submodule-update-config-doc:
submodule: improve documentation of update subcommand
The prompt string "remove?" used when "git clean -i" asks the user
if a path should be removed was localizable, but the code always
expects a substring of "yes" to tell it to go ahead. Always show
[y/N] as part of this prompt to hint that the answer is not (yet)
localized.
* ja/clean-confirm-i18n:
Add hint interactive cleaning
"git diff --shortstat --dirstat=changes" showed a dirstat based on
lines that was never asked by the end user in addition to the
dirstat that the user asked for.
* mk/diff-shortstat-dirstat-fix:
diff --shortstat --dirstat: remove duplicate output
"git remote add" mentioned "--tags" and "--no-tags" and was not
clear that fetch from the remote in the future will use the default
behaviour when neither is given to override it.
* mg/doc-remote-tags-or-not:
git-remote.txt: describe behavior without --tags and --no-tags
Description given by "grep -h" for its --exclude-standard option
was phrased poorly.
* nd/grep-exclude-standard-help-fix:
grep: correct help string for --exclude-standard
Code cleanups.
* rs/simple-cleanups:
sha1_name: use strlcpy() to copy strings
pretty: use starts_with() to check for a prefix
for-each-ref: use skip_prefix() to avoid duplicate string comparison
connect: use strcmp() for string comparison
The configuration variable 'mailinfo.scissors' was hard to
discover in the documentation.
* mm/am-c-doc:
Documentation/git-am.txt: mention mailinfo.scissors config variable
Documentation/config.txt: document mailinfo.scissors
Correct a breakage to git-svn around v2.2 era that triggers
premature closing of FileHandle.
* ew/svn-maint-fixes:
Git::SVN::*: avoid premature FileHandle closure
git-svn: fix localtime=true on non-glibc environments
Even though we officially haven't dropped Perl 5.8 support, the
Getopt::Long package that came with it does not support "--no-"
prefix to negate a boolean option; manually add support to help
people with older Getopt::Long package.
* km/send-email-getopt-long-workarounds:
git-send-email.perl: support no- prefix with older GetOptions
The __git_remotes() helper function lists the remotes from the config
file by processing the output of a 'git config' query. A simple 'git
remote' produces the exact same output, so run that instead.
Remotes under '$GIT_DIR/remotes' are still listed by running 'ls -1',
because 'git remote' unfortunately ignores them.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test checks that both remotes under '$GIT_DIR/remotes' and remotes
in the config file are listed.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
