If we get a repo path like "-repo.git", we may try to invoke
"git-upload-pack -repo.git". This is going to fail, since
upload-pack will interpret it as a set of bogus options. But
let's reject this before we even run the sub-program, since
we would not want to allow any mischief with repo names that
actually are real command-line options.
You can still ask for such a path via git-daemon, but there's no
security problem there, because git-daemon enters the repo itself
and then passes "." on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a GIT_PROXY_COMMAND configured, we will run it
with the host/port on the command-line. If a URL contains a
mischievous host like "--foo", we don't know how the proxy
command may handle it. It's likely to break, but it may also
do something dangerous and unwanted (technically it could
even do something useful, but that seems unlikely).
We should err on the side of caution and reject this before
we even run the command.
The hostname check matches the one we do in a similar
circumstance for ssh. The port check is not present for ssh,
but there it's not necessary because the syntax is "-p
<port>", and there's no ambiguity on the parsing side.
It's not clear whether you can actually get a negative port
to the proxy here or not. Doing:
git fetch git://remote:-1234/repo.git
keeps the "-1234" as part of the hostname, with the default
port of 9418. But it's a good idea to keep this check close
to the point of running the command to make it clear that
there's no way to circumvent it (and at worst it serves as a
belt-and-suspenders check).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We reject hostnames that start with a dash because they may
be confused for command-line options. Let's factor out that
notion into a helper function, as we'll use it in more
places. And while it's simple now, it's not clear if some
systems might need more complex logic to handle all cases.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per the explanation in the previous patch, this should be
(and is) rejected.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commands like "git fetch" talk with ssh://$rest_of_URL/, the
code splits $rest_of_URL into components like host, port, etc., and
then spawns the underlying "ssh" program by formulating argv[] array
that has:
- the path to ssh command taken from GIT_SSH_COMMAND, etc.
- dashed options like '-batch' (for Tortoise), '-p <port>' as
needed.
- ssh_host, which is supposed to be the hostname parsed out of
$rest_of_URL.
- then the command to be run on the other side, e.g. git
upload-pack.
If the ssh_host ends up getting '-<anything>', the argv[] that is
used to spawn the command becomes something like:
{ "ssh", "-p", "22", "-<anything>", "command", "to", "run", NULL }
which obviously is bogus, but depending on the actual value of
"<anything>", will make "ssh" parse and use it as an option.
Prevent this by forbidding ssh_host that begins with a "-".
Noticed-by: Joern Schneeweisz of Recurity Labs
Reported-by: Brian at GitLab
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests for protocol.allow actually set that variable in
the on-disk config, run a series of tests, and then never
clean up after themselves. This means that whatever tests we
run after have protocol.allow=never, which may influence
their results.
In most cases we either exit after running these tests, or
do another round of test_proto(). In the latter case, this happens to
work because:
1. Tests of the GIT_ALLOW_PROTOCOL environment variable
override the config.
2. Tests of the specific config "protocol.foo.allow"
override the protocol.allow config.
3. The next round of protocol.allow tests start off by
setting the config to a known value.
However, it's a land-mine waiting to trap somebody adding
new tests to one of the t581x test scripts. Let's make sure
we clean up after ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch is read from standard input and not from a parameter.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the unused variable "heads" from cmd_fsck().
This variable was made unused in commit c3271a0 ("fsck: do not fallback
"git fsck <bogus>" to "git fsck"", 2017-01-17).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When attempting to blame a non-existing path, git should show an error
message like this:
$ git blame e83c51633 -- nonexisting-file
fatal: no such path nonexisting-file in e83c51633
Since the recent commit 835c49f7d (blame: rework methods that
determine 'final' commit, 2017-05-24) the revision name is either
missing or some scrambled characters are shown instead. The reason is
that the revision name must be duplicated, because it is invalidated
when the pending objects array is cleared in the meantime, but this
commit dropped the duplication.
Restore the duplication of the revision name in the affected functions
(find_single_final() and find_single_initial()).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
It turns out that Cygwin also needs the fopen() wrapper that
returns failure when a directory is opened for reading.
* rj/cygwin-fread-reads-directories:
config.mak.uname: set FREAD_READS_DIRECTORIES for cygwin
We started using "%" PRItime, imitating "%" PRIuMAX and friends, as
a way to format the internal timestamp value, but this does not
play well with gettext(1) i18n framework, and causes "make pot"
that is run by the l10n coordinator to create a broken po/git.pot
file. This is a possible workaround for that problem.
* jc/po-pritime-fix:
Makefile: help gettext tools to cope with our custom PRItime format
Use "p4 -G" to make "p4 changes" output more Python-friendly
to parse.
* mt/p4-parse-G-output:
git-p4: filter for {'code':'info'} in p4CmdList
git-p4: parse marshal output "p4 -G" in p4 changes
git-p4: git-p4 tests with p4 triggers
A recent update made it easier to use "-fsanitize=" option while
compiling but supported only one sanitize option. Allow more than
one to be combined, joined with a comma, like "make SANITIZE=foo,bar".
* jk/build-with-asan:
Makefile: allow combining UBSan with other sanitizers
A recent update broke an alias that contained an uppercase letter.
* js/alias-case-sensitivity:
alias: compare alias name *case-insensitively*
t1300: demonstrate that CamelCased aliases regressed
The "used" field in struct object is only used by builtin/fsck. Remove
that field and modify builtin/fsck to use a flag instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
