Just like tbdiff, we now show the diff between matching patches. This is
a "diff of two diffs", so it can be a bit daunting to read for the
beginner.
An alternative would be to display an interdiff, i.e. the hypothetical
diff which is the result of first reverting the old diff and then
applying the new diff.
Especially when rebasing frequently, an interdiff is often not feasible,
though: if the old diff cannot be applied in reverse (due to a moving
upstream), an interdiff can simply not be inferred.
This commit brings `range-diff` closer to feature parity with regard
to tbdiff.
To make `git range-diff` respect e.g. color.diff.* settings, we have
to adjust git_branch_config() accordingly.
Note: while we now parse diff options such as --color, the effect is not
yet the same as in tbdiff, where also the commit pairs would be colored.
This is left for a later commit.
Note also: while tbdiff accepts the `--no-patches` option to suppress
these diffs between patches, we prefer the `-s` (or `--no-patch`) option
that is automatically supported via our use of diff_opt_parse().
And finally note: to support diff options, we have to call
`parse_options()` such that it keeps unknown options, and then loop over
those and let `diff_opt_parse()` handle them. After that loop, we have
to call `parse_options()` again, to make sure that no unknown options
are left.
Helped-by: Thomas Gummerer <t.gummerer@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At this stage, `git range-diff` can determine corresponding commits
of two related commit ranges. This makes use of the recently introduced
implementation of the linear assignment algorithm.
The core of this patch is a straight port of the ideas of tbdiff, the
apparently dormant project at https://github.com/trast/tbdiff.
The output does not at all match `tbdiff`'s output yet, as this patch
really concentrates on getting the patch matching part right.
Note: due to differences in the diff algorithm (`tbdiff` uses the Python
module `difflib`, Git uses its xdiff fork), the cost matrix calculated
by `range-diff` is different (but very similar) to the one calculated
by `tbdiff`. Therefore, it is possible that they find different matching
commits in corner cases (e.g. when a patch was split into two patches of
roughly equal length).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command does not do a whole lot so far, apart from showing a usage
that is oddly similar to that of `git tbdiff`. And for a good reason:
the next commits will turn `range-branch` into a full-blown replacement
for `tbdiff`.
At this point, we ignore tbdiff's color options, as they will all be
implemented later using diff_options.
Since f318d73915 (generate-cmds.sh: export all commands to
command-list.h, 2018-05-10), every new command *requires* a man page to
build right away, so let's also add a blank man page, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, repack does not touch promisor packfiles at all, potentially
causing the performance of repositories that have many such packfiles to
drop. Therefore, repack all promisor objects if invoked with -a or -A.
This is done by an additional invocation of pack-objects on all promisor
objects individually given, which takes care of deduplication and allows
the resulting packfiles to respect flags such as --max-pack-size.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will teach repack to run pack-objects with some same
and some different arguments if repacking of promisor objects is
required. Refactor the setup of the pack-objects cmd so that setting up
the arguments common to both is done in a function.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows' original 4aa8b8c8283 (Teach 'git pull' to handle
--rebase=interactive, 2011-10-21) had support for the very convenient
abbreviation
git pull --rebase=i
which was later lost when it was ported to the builtin `git pull`, and
it was not introduced before the patch eventually made it into Git as
f5eb87b98d (pull: allow interactive rebase with --rebase=interactive,
2016-01-13).
However, it is *really* a useful short hand for the occasional rebasing
pull on branches that do not usually want to be rebased.
So let's reintroduce this convenience, at long last.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parseopt wraps argument help strings in a pair of angular brackets by
default, to tell users that they need to replace it with an actual
value. This is useful in most cases, because most option arguments
are indeed single values of a certain type. The option
PARSE_OPT_LITERAL_ARGHELP needs to be used in option definitions with
arguments that have multiple parts or are literal strings.
Stop adding these angular brackets if special characters are present,
as they indicate that we don't deal with a simple placeholder. This
simplifies the code a bit and makes defining special options slightly
easier.
Remove the flag PARSE_OPT_LITERAL_ARGHELP in the cases where the new
and more cautious handling suffices.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap the placeholders in the option help string for -w in pairs of
angular brackets to document that users need to replace them with actual
numbers. Use the flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt
from adding another pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap each part of the argument help string in angular brackets to show
that users need to replace them with actual values. Do that explicitly
to balance the pairs nicely in the code and avoid confusing casual
readers. Add the flag PARSE_OPT_LITERAL_ARGHELP to keep parseopt from
adding another pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap both placeholders in the argument help string in angular brackets
to signal that users needs replace them with some actual value. Use the
flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt from adding another
pair.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parseopt wraps arguments in a pair of angular brackets by default,
signifying that the user needs to replace it with a value of the
documented type. Remove the pairs from the option definitions to
duplication and confusion.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't translate the argument specification for --chmod; "+x" and "-x"
are the literal strings that the commands accept.
Separate alternatives using a pipe character instead of a slash, for
consistency.
Use the flag PARSE_OPT_LITERAL_ARGHELP to prevent parseopt from adding a
pair of angular brackets around the argument help string, as that would
wrongly indicate that users need to replace the literal strings with
some kind of value.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option help text for the force-with-lease option to "git push"
reads like this:
$ git push -h 2>&1 | grep -e force-with-lease
--force-with-lease[=<refname>:<expect>]
which comes from having N_("refname>:<expect") as the argument help
text in the source code, with an aparent lack of "<" and ">" at both
ends.
It turns out that parse-options machinery takes the whole string and
encloses it inside a pair of "<>", to make it easier for majority
cases that uses a single token placeholder.
The help string was written in a funnily unbalanced way knowing that
the end result would balance out, by somebody who forgot the
presence of PARSE_OPT_LITERAL_ARGHELP, which is the escape hatch
mechanism designed to help such a case. We just should use the
official escape hatch instead.
Because ":<expect>" part can be omitted to ask Git to guess, it may
be more correct to spell it as "<refname>[:<expect>]", but that is
not the focus of this topic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
"git gc --auto" opens file descriptors for the packfiles before
spawning "git repack/prune", which would upset Windows that does
not want a process to work on a file that is open by another
process. The issue has been worked around.
* kg/gc-auto-windows-workaround:
gc --auto: release pack files before auto packing
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
Parsing of -L[<N>][,[<M>]] parameters "git blame" and "git log"
take has been tweaked.
* is/parsing-line-range:
log: prevent error if line range ends past end of file
blame: prevent error if range ends past end of file
"git checkout" and "git worktree add" learned to honor
checkout.defaultRemote when auto-vivifying a local branch out of a
remote tracking branch in a repository with multiple remotes that
have tracking branches that share the same names.
* ab/checkout-default-remote:
checkout & worktree: introduce checkout.defaultRemote
checkout: add advice for ambiguous "checkout <branch>"
builtin/checkout.c: use "ret" variable for return
checkout: pass the "num_matches" up to callers
checkout.c: change "unique" member to "num_matches"
checkout.c: introduce an *_INIT macro
checkout.h: wrap the arguments to unique_tracking_name()
checkout tests: index should be clean after dwim checkout
"git fsck" learns to make sure the optional commit-graph file is in
a sane state.
* ds/commit-graph-fsck: (23 commits)
coccinelle: update commit.cocci
commit-graph: update design document
gc: automatically write commit-graph files
commit-graph: add '--reachable' option
commit-graph: use string-list API for input
fsck: verify commit-graph
commit-graph: verify contents match checksum
commit-graph: test for corrupted octopus edge
commit-graph: verify commit date
commit-graph: verify generation number
commit-graph: verify parent list
commit-graph: verify root tree OIDs
commit-graph: verify objects exist
commit-graph: verify corrupt OID fanout and lookup
commit-graph: verify required chunks are present
commit-graph: verify catches corrupt signature
commit-graph: add 'verify' subcommand
commit-graph: load a root tree from specific graph
commit: force commit to parse from object database
commit-graph: parse commit from chosen graph
...
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
When a user fetches:
- at least one up-to-date ref and at least one non-up-to-date ref,
- using HTTP with protocol v0 (or something else that uses the fetch
command of a remote helper)
some refs might not be updated after the fetch.
This bug was introduced in commit 989b8c4452 ("fetch-pack: put shallow
info in output parameter", 2018-06-28) which allowed transports to
report the refs that they have fetched in a new out-parameter
"fetched_refs". If they do so, transport_fetch_refs() makes this
information available to its caller.
Users of "fetched_refs" rely on the following 3 properties:
(1) it is the complete list of refs that was passed to
transport_fetch_refs(),
(2) it has shallow information (REF_STATUS_REJECT_SHALLOW set if
relevant), and
(3) it has updated OIDs if ref-in-want was used (introduced after
989b8c4452).
In an effort to satisfy (1), whenever transport_fetch_refs()
filters the refs sent to the transport, it re-adds the filtered refs to
whatever the transport supplies before returning it to the user.
However, the implementation in 989b8c4452 unconditionally re-adds the
filtered refs without checking if the transport refrained from reporting
anything in "fetched_refs" (which it is allowed to do), resulting in an
incomplete list, no longer satisfying (1).
An earlier effort to resolve this [1] solved the issue by readding the
filtered refs only if the transport did not refrain from reporting in
"fetched_refs", but after further discussion, it seems that the better
solution is to revert the API change that introduced "fetched_refs".
This API change was first suggested as part of a ref-in-want
implementation that allowed for ref patterns and, thus, there could be
drastic differences between the input refs and the refs actually fetched
[2]; we eventually decided to only allow exact ref names, but this API
change remained even though its necessity was decreased.
Therefore, revert this API change by reverting commit 989b8c4452, and
make receive_wanted_refs() update the OIDs in the sought array (like how
update_shallow() updates shallow information in the sought array)
instead. A test is also included to show that the user-visible bug
discussed at the beginning of this commit message no longer exists.
[1] https://public-inbox.org/git/20180801171806.GA122458@google.com/
[2] https://public-inbox.org/git/86a128c5fb710a41791e7183207c4d64889f9307.1485381677.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch to the _DUP variant of string_list for remote_branches to allow
string_list_clear() to release the allocated memory at the end, and
actually call that function. Free the util pointer as well; it is
allocated in read_remote_branches().
NB: This string_list is empty until read_remote_branches() is called
via for_each_ref(), so there is no need to clean it up when returning
before that point.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These extra comments should be make it easier to understand how to use
locks in pack-objects delta search code. For reference, see
8ecce684a3 (basic threaded delta search - 2007-09-06)
384b32c09b (pack-objects: fix threaded load balancing - 2007-12-08)
50f22ada52 (threaded pack-objects: Use condition... - 2007-12-16)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* hs/push-cert-check-cleanup:
gpg-interface: make parse_gpg_output static and remove from interface header
builtin/receive-pack: use check_signature from gpg-interface
Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
"git fetch" failed to correctly validate the set of objects it
received when making a shallow history deeper, which has been
corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: write shallow, then check connectivity
fetch-pack: implement ref-in-want
fetch-pack: put shallow info in output parameter
fetch: refactor to make function args narrower
fetch: refactor fetch_refs into two functions
fetch: refactor the population of peer ref OIDs
upload-pack: test negotiation with changing repository
upload-pack: implement ref-in-want
test-pkt-line: add unpack-sideband subcommand
When we initially added the strbuf_readlink() function in
b11b7e13f4 (Add generic 'strbuf_readlink()' helper function,
2008-12-17), the point was that we generally have a _guess_
as to the correct size based on the stat information, but we
can't necessarily trust it.
Over the years, a few callers have grown up that simply pass
in 0, even though they have the stat information. Let's have
them pass in their hint for consistency (and in theory
efficiency, since it may avoid an extra resize/syscall loop,
but neither location is probably performance critical).
Note that st.st_size is actually an off_t, so in theory we
need xsize_t() here. But none of the other callsites use it,
and since this is just a hint, it doesn't matter either way
(if we wrap we'll simply start with a too-small hint and
then eventually complain when we cannot allocate the
memory).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing tag following, in addition to using the server's
"include-tag" capability to send tag objects (and emulating it if the
server does not support that capability), "git fetch" relies upon the
presence of refs/tags/* entries in the initial ref advertisement to
locally create refs pointing to the aforementioned tag objects. When
using protocol v2, refs/tags/* entries in the initial ref advertisement
may be suppressed by a ref-prefix argument, leading to the tag object
being downloaded, but the ref not being created.
Commit dcc73cf7ff ("fetch: generate ref-prefixes when using a configured
refspec", 2018-05-18) ensured that "refs/tags/" is always sent as a ref
prefix when "git fetch" is invoked with no refspecs, but not when "git
fetch" is invoked with refspecs. Extend that functionality to make it
work in both situations.
This also necessitates a change another test which tested ref
advertisement filtering using tag refs - since tag refs are sent by
default now, the test has been switched to using branch refs instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these are straight forward. GETTEXT_POISON does catch the last
string in cmd_pack_objects(), but since this is --progress output, it's
not supposed to be machine-readable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's start with some background about oe_delta_size() and
oe_set_delta_size(). If you already know, skip the next paragraph.
These two are added in 0aca34e826 (pack-objects: shrink delta_size
field in struct object_entry - 2018-04-14) to help reduce 'struct
object_entry' size. The delta size field in this struct is reduced to
only contain max 1MB. So if any new delta is produced and larger than
1MB, it's dropped because we can't really save such a large size
anywhere. Fallback is provided in case existing packfiles already have
large deltas, then we can retrieve it from the pack.
While this should help small machines repacking large repos without
large deltas (i.e. less memory pressure), dropping large deltas during
the delta selection process could end up with worse pack files. And if
existing packfiles already have >1MB delta and pack-objects is
instructed to not reuse deltas, all of them will be dropped on the
floor, and the resulting pack would be definitely bigger.
There is also a regression in terms of CPU/IO if we have large on-disk
deltas because fallback code needs to parse the pack every time the
delta size is needed and just access to the mmap'd pack data is enough
for extra page faults when memory is under pressure.
Both of these issues were reported on the mailing list. Here's some
numbers for comparison.
Version Pack (MB) MaxRSS(kB) Time (s)
------- --------- ---------- --------
2.17.0 5498 43513628 2494.85
2.18.0 10531 40449596 4168.94
This patch provides a better fallback that is
- cheaper in terms of cpu and io because we won't have to read
existing pack files as much
- better in terms of pack size because the pack heuristics is back to
2.17.0 time, we do not drop large deltas at all
If we encounter any delta (on-disk or created during try_delta phase)
that is larger than the 1MB limit, we stop using delta_size_ field for
this because it can't contain such size anyway. A new array of delta
size is dynamically allocated and can hold all the deltas that 2.17.0
can. This array only contains delta sizes that delta_size_ can't
contain.
With this, we do not have to drop deltas in try_delta() anymore. Of
course the downside is we use slightly more memory, even compared to
2.17.0. But since this is considered an uncommon case, a bit more
memory consumption should not be a problem.
Delta size limit is also raised from 1MB to 16MB to better cover
common case and avoid that extra memory consumption (99.999% deltas in
this reported repo are under 12MB; Jeff noted binary artifacts topped
out at about 3MB in some other private repos). Other fields are
shuffled around to keep this struct packed tight. We don't use more
memory in common case even with this limit update.
A note about thread synchronization. Since this code can be run in
parallel during delta searching phase, we need a mutex. The realloc
part in packlist_alloc() is not protected because it only happens
during the object counting phase, which is always single-threaded.
Access to e->delta_size_ (and by extension
pack->delta_size[e - pack->objects]) is unprotected as before, the
thread scheduler in pack-objects must make sure "e" is never updated
by two different threads.
The area under the new lock is as small as possible, avoiding locking
at all in common case, since lock contention with high thread count
could be expensive (most blobs are small enough that delta compute
time is short and we end up taking the lock very often). The previous
attempt to always hold a lock in oe_delta_size() and
oe_set_delta_size() increases execution time by 33% when repacking
linux.git with with 40 threads.
Reported-by: Elijah Newren <newren@gmail.com>
Helped-by: Elijah Newren <newren@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach clone to send a list of ref-prefixes, when using protocol v2, to
allow the server to filter out irrelevant references from the
ref-advertisement. This reduces wasted time and bandwidth when cloning
repositories with a larger number of references.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tighten the API to make it harder to misuse in-tree .gitmodules
file, even though it shares the same syntax with configuration
files, to read random configuration items from it.
* ao/config-from-gitmodules:
submodule-config: reuse config_from_gitmodules in repo_read_gitmodules
submodule-config: pass repository as argument to config_from_gitmodules
submodule-config: make 'config_from_gitmodules' private
submodule-config: add helper to get 'update-clone' config from .gitmodules
submodule-config: add helper function to get 'fetch' config from .gitmodules
config: move config_from_gitmodules to submodule-config.c
The "-l" option in "git branch -l" is an unfortunate short-hand for
"--create-reflog", but many users, both old and new, somehow expect
it to be something else, perhaps "--list". This step warns when "-l"
is used as a short-hand for "--create-reflog" and warns about the
future repurposing of the it when it is used.
* jk/branch-l-0-deprecation:
branch: deprecate "-l" option
t: switch "branch -l" to "branch --create-reflog"
t3200: unset core.logallrefupdates when testing reflog creation
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
The effort to move globals to per-repository in-core structure
continues.
* jt/remove-pack-bitmap-global:
pack-bitmap: add free function
pack-bitmap: remove bitmap_git global variable
Recently added "--base" option to "git format-patch" command did
not correctly generate prereq patch ids.
* xy/format-patch-prereq-patch-id-fix:
format-patch: clear UNINTERESTING flag before prepare_bases
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use GIT_MAX_HEXSZ instead of GIT_SHA1_HEXSZ for an allocation so that it
is sufficiently large. Switch a comparison to use the_hash_algo to
determine the length of a hex object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch uses of GIT_SHA1_HEXSZ to use the_hash_algo instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several uses of GIT_SHA1_HEXSZ into references to the_hash_algo.
Switch other uses into a use of parse_oid_hex and uses of its computed
pointer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from using get_oid_hex to parse_oid_hex to simplify pointer
operations and avoid the need for a hash-related constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch from using GIT_SHA1_HEXSZ to the_hash_algo to make the parsing of
the index information hash independent.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our color buffers are all COLOR_MAXLEN, which fits the
largest possible color. So we can never overflow the buffer
by copying an existing color. However, using strcpy() makes
it harder to audit the code-base for calls that _are_
problems. We should use something like xsnprintf(), which
shows the reader that we expect this never to fail (and
provides a run-time assertion if it does, just in case).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is consistent with `git commit` which, like `git merge`, supports
passing the commit message via `-m <msg>` and, unlike `git merge` before
this patch, via `-F <file>`.
It is useful to allow this for scripted use, or for the upcoming patch
to allow (re-)creating octopus merges in `git rebase --rebase-merges`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combination of verify_signed_buffer followed by parse_gpg_output is
available as check_signature. Use that instead of implementing it again.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git merge-recursive` does a three-way merge between user-specified trees
base, head, and remote. Since the user is allowed to specify head, we can
not necesarily assume that head == HEAD.
Modify index_has_changes() to take an extra argument specifying the tree
to compare against. If NULL, it will compare to HEAD. We then use this
from merge-recursive to make sure we compare to the user-specified head.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gc --auto to release pack files before auto packing the repository
to prevent failures when removing them.
Also teach the test 'fetching with auto-gc does not lock up' to complain
when it is no longer triggering an auto packing of the repository.
Fixes https://github.com/git-for-windows/git/issues/500
Signed-off-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git grep --only-matching', a new option to only print the
matching part(s) of a line.
For instance, a line containing the following (taken from README.md:27):
(`man gitcvs-migration` or `git help cvs-migration` if git is
Is printed as follows:
$ git grep --line-number --column --only-matching -e git -- \
README.md | grep ":27"
README.md:27:7:git
README.md:27:16:git
README.md:27:38:git
The patch works mostly as one would expect, with the exception of a few
considerations that are worth mentioning here.
Like GNU grep, this patch ignores --only-matching when --invert (-v) is
given. There is a sensible answer here, but parity with the behavior of
other tools is preferred.
Because a line might contain more than one match, there are special
considerations pertaining to when to print line headers, newlines, and
how to increment the match column offset. The line header and newlines
are handled as a special case within the main loop to avoid polluting
the surrounding code with conditionals that have large blocks.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit that introduced the partial clone feature - 548719fbdc
("clone: partial clone", 2017-12-08) - excluded connectivity checks
for partial clones, but this also meant that it is possible for a clone
to succeed, yet not have all objects either present or promised.
Specifically, if cloning with --filter=blob:none from a repository that
has a tag pointing to a blob, and the blob is not sent in the packfile,
the clone will pass, even if the blob is not referenced by any tree in
the packfile.
Turn on connectivity checks for partial clone.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As reported here[0], Microsoft Visual Studio 2017.2 and "gcc -pedantic"
don't understand the forward declaration of an unsized static array.
They insist on an array size:
d:\git\src\builtin\config.c(70,46): error C2133: 'builtin_config_options': unknown size
The thread [1] explains that this is due to the single-pass nature of
old compilers.
To work around this error, introduce the forward-declared function
usage_builtin_config() instead that uses the array
builtin_config_options only after it has been defined.
Also use this function in all other places where usage_with_options() is
called with the same arguments.
[0]: https://github.com/git-for-windows/git/issues/1735
[1]: https://groups.google.com/forum/#!topic/comp.lang.c.moderated/bmiF2xMz51U
Fixes https://github.com/git-for-windows/git/issues/1735
Reported-By: Karen Huang (via GitHub)
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During negotiation, fetch-pack eventually reports as "have" lines all
commits reachable from all refs. Allow the user to restrict the commits
sent in this way by providing a whitelist of tips; only the tips
themselves and their ancestors will be sent.
Both globs and single objects are supported.
This feature is only supported for protocols that support connect or
stateless-connect (such as HTTP with protocol v2).
This will speed up negotiation when the repository has multiple
relatively independent branches (for example, when a repository
interacts with multiple repositories, such as with linux-next [1] and
torvalds/linux [2]), and the user knows which local branch is likely to
have commits in common with the upstream branch they are fetching.
[1] https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next/
[2] https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetching, connectivity is checked after the shallow file is
updated. There are 2 issues with this: (1) the connectivity check is
only performed up to ancestors of existing refs (which is not thorough
enough if we were deepening an existing ref in the first place), and (2)
there is no rollback of the shallow file if the connectivity check
fails.
To solve (1), update the connectivity check to check the ancestry chain
completely in the case of a deepening fetch by refraining from passing
"--not --all" when invoking rev-list in connected.c.
To solve (2), have fetch_pack() perform its own connectivity check
before updating the shallow file. To support existing use cases in which
"git fetch-pack" is used to download objects without much regard as to
the connectivity of the resulting objects with respect to the existing
repository, the connectivity check is only done if necessary (that is,
the fetch is not a clone, and the fetch involves shallow/deepen
functionality). "git fetch" still performs its own connectivity check,
preserving correctness but sometimes performing redundant work. This
redundancy is mitigated by the fact that fetch_pack() reports if it has
performed a connectivity check itself, and if the transport supports
connect or stateless-connect, it will bubble up that report so that "git
fetch" knows not to perform the connectivity check in such a case.
This was noticed when a user tried to deepen an existing repository by
fetching with --no-shallow from a server that did not send all necessary
objects - the connectivity check as run by "git fetch" succeeded, but a
subsequent "git fsck" failed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify index_has_changes() to take a struct istate* instead of just
operating on the_index. This is only a partial conversion, though,
because we call do_diff_cache() which implicitly assumes work is to be
done on the_index. Ongoing work is being done elsewhere to do the
remainder of the conversion, and thus is not duplicated here. Instead,
a simple check is put in place until that work is complete.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It has been observed that the time spent loading an index with a large
number of entries is partly dominated by malloc() calls. This change
is in preparation for using memory pools to reduce the number of
malloc() calls made to allocate cahce entries when loading an index.
Add an API to allocate and discard cache entries, abstracting the
details of managing the memory backing the cache entries. This commit
does actually change how memory is managed - this will be done in a
later commit in the series.
This change makes the distinction between cache entries that are
associated with an index and cache entries that are not associated with
an index. A main use of cache entries is with an index, and we can
optimize the memory management around this. We still have other cases
where a cache entry is not persisted with an index, and so we need to
handle the "transient" use case as well.
To keep the congnitive overhead of managing the cache entries, there
will only be a single discard function. This means there must be enough
information kept with the cache entry so that we know how to discard
them.
A summary of the main functions in the API is:
make_cache_entry: create cache entry for use in an index. Uses specified
parameters to populate cache_entry fields.
make_empty_cache_entry: Create an empty cache entry for use in an index.
Returns cache entry with empty fields.
make_transient_cache_entry: create cache entry that is not used in an
index. Uses specified parameters to populate
cache_entry fields.
make_empty_transient_cache_entry: create cache entry that is not used in
an index. Returns cache entry with
empty fields.
discard_cache_entry: A single function that knows how to discard a cache
entry regardless of how it was allocated.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of deref_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_tag_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of
lookup_commit_reference_gently to be more specific about which
repository to handle. This is a small mechanical change; it doesn't
change the implementation to handle repositories other than
the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tree
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
"git send-pack --signed" (hence "git push --signed" over the http
transport) did not read user ident from the config mechanism to
determine whom to sign the push certificate as, which has been
corrected.
* ms/send-pack-honor-config:
builtin/send-pack: populate the default configs
Make refspec parsing codepath more robust.
* ab/refspec-init-fix:
refspec: initalize `refspec_item` in `valid_fetch_refspec()`
refspec: add back a refspec_item_init() function
refspec: s/refspec_item_init/&_or_die/g
Expand the transport fetch method signature, by adding an output
parameter, to allow transports to return information about the refs they
have fetched. Then communicate shallow status information through this
mechanism instead of by modifying the input list of refs.
This does require clients to sometimes generate the ref map twice: once
from the list of refs provided by the remote (as is currently done) and
potentially once from the new list of refs that the fetch mechanism
provides.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor find_non_local_tags and get_ref_map to only take the
information they need instead of the entire transport struct. Besides
improving code clarity, this also improves their flexibility, allowing
for a different set of refs to be used instead of relying on the ones
stored in the transport struct.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the fetch_refs function into a function that does the fetching
of refs and another function that stores them. This is in preparation
for allowing additional processing of the fetched refs before updating
the local ref store.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Populate peer ref OIDs in get_ref_map instead of do_fetch. Besides
tightening scopes of variables in the code, this also prepares for
get_ref_map being able to be called multiple times within do_fetch.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph file is a very helpful feature for speeding up git
operations. In order to make it more useful, make it possible to
write the commit-graph file during standard garbage collection
operations.
Add a 'gc.commitGraph' config setting that triggers writing a
commit-graph file after any non-trivial 'git gc' command. Defaults to
false while the commit-graph feature matures. We specifically do not
want to have this on by default until the commit-graph feature is fully
integrated with history-modifying features like shallow clones.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing commit-graph files, it can be convenient to ask for all
reachable commits (starting at the ref set) in the resulting file. This
is particularly helpful when writing to stdin is complicated, such as a
future integration with 'git gc'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If core.commitGraph is true, verify the contents of the commit-graph
during 'git fsck' using the 'git commit-graph verify' subcommand. Run
this check on all alternates, as well.
We use a new process for two reasons:
1. The subcommand decouples the details of loading and verifying a
commit-graph file from the other fsck details.
2. The commit-graph verification requires the commits to be loaded
in a specific order to guarantee we parse from the commit-graph
file for some objects and from the object database for others.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the commit-graph file becomes corrupt, we need a way to verify
that its contents match the object database. In the manner of
'git fsck' we will implement a 'git commit-graph verify' subcommand
to report all issues with the file.
Add the 'verify' subcommand to the 'commit-graph' builtin and its
documentation. The subcommand is currently a no-op except for
loading the commit-graph into memory, which may trigger run-time
errors that would be caught by normal use. Add a simple test that
ensures the command returns a zero error code.
If no commit-graph file exists, this is an acceptable state. Do
not report any errors.
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper function to make it clearer that retrieving 'update-clone'
configuration from the .gitmodules file is a special case supported
solely for backward compatibility purposes.
This change removes one direct use of 'config_from_gitmodules' for
options not strictly related to submodules: "submodule.fetchjobs" does
not describe a property of a submodule, but a behavior of other commands
when dealing with submodules, so it does not really belong to the
.gitmodules file.
This is in the effort to communicate better that .gitmodules is not to
be used as a mechanism to store arbitrary configuration in the
repository that any command can retrieve.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a helper function to make it clearer that retrieving 'fetch'
configuration from the .gitmodules file is a special case supported
solely for backward compatibility purposes.
This change removes one direct use of 'config_from_gitmodules' in code
not strictly related to submodules, in the effort to communicate better
that .gitmodules is not to be used as a mechanism to store arbitrary
configuration in the repository that any command can retrieve.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Misc leak plugging.
* sb/plug-misc-leaks:
sequencer.c: plug mem leak in git_sequencer_config
sequencer.c: plug leaks in do_pick_commit
submodule--helper: plug mem leak in print_default_remote
refs/packed-backend.c: close fd of empty file
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
"git diff" compares the index and the working tree. For paths
added with intent-to-add bit, the command shows the full contents
of them as added, but the paths themselves were not marked as new
files. They are now shown as new by default.
"git apply" learned the "--intent-to-add" option so that an
otherwise working-tree-only application of a patch will add new
paths to the index marked with the "intent-to-add" bit.
* nd/diff-apply-ita:
apply: add --intent-to-add
t2203: add a test about "diff HEAD" case
diff: turn --ita-invisible-in-index on by default
diff: ignore --ita-[in]visible-in-index when diffing worktree-to-tree
Update to ds/generation-numbers topic.
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
The bulk of "git submodule foreach" has been rewritten in C.
* pc/submodule-helper-foreach:
submodule: port submodule subcommand 'foreach' from shell to C
submodule foreach: document variable '$displaypath'
submodule foreach: document '$sm_path' instead of '$path'
submodule foreach: correct '$path' in nested submodules from a subdirectory
The "-l" option is short for "--create-reflog". This has
caused much confusion over the years. Most people expect it
to work as "--list", because that would match the other
"mode" options like -d/--delete and -m/--move, as well as
the similar -l/--list option of git-tag.
Adding to the confusion, using "-l" _appears_ to work as
"--list" in some cases:
$ git branch -l
* master
because the branch command defaults to listing (so even
trying to specify --list in the command above is redundant).
But that may bite the user later when they add a pattern,
like:
$ git branch -l foo
which does not return an empty list, but in fact creates a
new branch (with a reflog, naturally) called "foo".
It's also probably quite uncommon for people to actually use
"-l" to create a reflog. Since 0bee591869 (Enable reflogs by
default in any repository with a working directory.,
2006-12-14), this is the default in non-bare repositories.
So it's rather unfortunate that the feature squats on the
short-and-sweet "-l" (which was only added in 3a4b3f269c
(Create/delete branch ref logs., 2006-05-19), meaning there
were only 7 months where it was actually useful).
Let's deprecate "-l" in hopes of eventually re-purposing it
to "--list".
Note that we issue the warning only when we're not in list
mode. This means that people for whom it works as a happy
accident, namely:
$ git branch -l
master
won't see the warning at all. And when we eventually switch
to it meaning "--list", that will just continue to work.
We do the issue the warning for these important cases:
- when we are actually creating a branch, in case the user
really did mean it as "--create-reflog"
- when we are in some _other_ mode, like deletion. There
the "-l" is a noop for now, but it will eventually
conflict with any other mode request, and the user
should be told that this is changing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git-grep(1)' a new option, '--column', to show the column
number of the first match on a non-context line. This makes it possible
to teach 'contrib/git-jump/git-jump' how to seek to the first matching
position of a grep match in your editor, and allows similar additional
scripting capabilities.
For example:
$ git grep -n --column foo | head -n3
.clang-format:51:14:# myFunction(foo, bar, baz);
.clang-format:64:7:# int foo();
.clang-format:75:8:# void foo()
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function to free struct bitmap_index instances, and use it where
needed (except when rebuild_existing_bitmaps() is used, since it creates
references to the bitmaps within the struct bitmap_index passed to it).
Note that the hashes field in struct bitmap_index is not freed because
it points to another field within the same struct. The documentation for
that field has been updated to clarify that.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the bitmap_git global variable. Instead, generate on demand an
instance of struct bitmap_index for code that needs to access it.
This allows us significant control over the lifetime of instances of
struct bitmap_index. In particular, packs can now be closed without
worrying if an unnecessarily long-lived "pack" field in struct
bitmap_index still points to it.
The bitmap API is also clearer in that we need to first obtain a struct
bitmap_index, then we use it.
This patch raises two potential issues: (1) memory for the struct
bitmap_index is allocated without being freed, and (2)
prepare_bitmap_git() and prepare_bitmap_walk() can reuse a previously
loaded bitmap. For (1), this will be dealt with in a subsequent patch in
this patch set that also deals with freeing the contents of the struct
bitmap_index (which were not freed previously, because they have global
scope). For (2), current bitmap users only load the bitmap once at most
(note that pack-objects can use bitmaps or write bitmaps, but not both
at the same time), so support for reuse has no effect - and future users
can pass around the struct bitmap_index * obtained if they need to do 2
or more things with the same bitmap.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When users specify the commit range with 'Z..C' pattern for format-patch, all
the parents of Z (including Z) would be marked as UNINTERESTING which would
prevent revision walk in prepare_bases from getting the prerequisite commits,
thus `git format-patch --base <base_commit_sha> Z..C` won't be able to generate
the list of prerequisite patch ids. Clear UNINTERESTING flag with
clear_object_flags solves this issue.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the -L option is used to specify a line range in git blame, and the
end of the range is past the end of the file, git will fail with a fatal
error. This commit prevents such behavior - instead we display the blame
for existing lines within the specified range. Tests are amended
accordingly.
This commit also fixes two corner cases. Blaming -L n,-(n+1) now blames
the first n lines of a file rather than from n to the end of the file.
Blaming -L ,-n will be treated as -L 1,-n and blame the first line of
the file, rather than blaming the whole file.
Signed-off-by: Isabella Stephens <istephens@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"index-pack --strict" has been taught to make sure that it runs the
final object integrity checks after making the freshly indexed
packfile available to itself.
* jk/index-pack-maint:
index-pack: correct install_packed_git() args
index-pack: handle --strict checks of non-repo packs
prepare_commit_graft: treat non-repository as a noop
Use the obvious consensus of hyphenated "remote-tracking branch", and
fix an obvious typo, all in documentation and comments.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/send-pack didn't call git_default_config, and because of this
git push --signed didn't respect the username and email in gitconfig in
the HTTP transport.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function does not start taking the repository object as a
parameter before v2.18 track. Make the topic mergeable to v2.17
maintenance track by dropping it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the refspec_item_init() function introduced in
6d4c057859 ("refspec: introduce struct refspec", 2018-05-16) to
refspec_item_init_or_die().
This follows the convention of other *_or_die() functions, and is done
in preparation for making it a wrapper for a non-fatal variant.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a checkout.defaultRemote setting which can be used to
designate a remote to prefer (via checkout.defaultRemote=origin) when
running e.g. "git checkout master" to mean origin/master, even though
there's other remotes that have the "master" branch.
I want this because it's very handy to use this workflow to checkout a
repository and create a topic branch, then get back to a "master" as
retrieved from upstream:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git checkout master
)
That will output:
Branch 'master' set up to track remote branch 'master' from 'origin'.
Switched to a new branch 'master'
But as soon as a new remote is added (e.g. just to inspect something
from someone else) the DWIMery goes away:
(
cd /tmp &&
rm -rf tbdiff &&
git clone git@github.com:trast/tbdiff.git &&
cd tbdiff &&
git branch -m topic &&
git remote add avar git@github.com:avar/tbdiff.git &&
git fetch avar &&
git checkout master
)
Will output (without the advice output added earlier in this series):
error: pathspec 'master' did not match any file(s) known to git.
The new checkout.defaultRemote config allows me to say that whenever
that ambiguity comes up I'd like to prefer "origin", and it'll still
work as though the only remote I had was "origin".
Also adjust the advice.checkoutAmbiguousRemoteBranchName message to
mention this new config setting to the user, the full output on my
git.git is now (the last paragraph is new):
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
hint:
hint: If you'd like to always have checkouts of an ambiguous <name> prefer
hint: one remote, e.g. the 'origin' remote, consider setting
hint: checkout.defaultRemote=origin in your config.
I considered splitting this into checkout.defaultRemote and
worktree.defaultRemote, but it's probably less confusing to break our
own rules that anything shared between config should live in core.*
than have two config settings, and I couldn't come up with a short
name under core.* that made sense (core.defaultRemoteForCheckout?).
See also 70c9ac2f19 ("DWIM "git checkout frotz" to "git checkout -b
frotz origin/frotz"", 2009-10-18) which introduced this DWIM feature
to begin with, and 4e85333197 ("worktree: make add <path> <branch>
dwim", 2017-11-26) which added it to git-worktree.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "checkout" documentation describes:
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat
as equivalent to [...] <remote>/<branch.
This is a really useful feature. The problem is that when you add
another remote (e.g. a fork), git won't find a unique branch name
anymore, and will instead print this unhelpful message:
$ git checkout master
error: pathspec 'master' did not match any file(s) known to git
Now it will, on my git.git checkout, print:
$ ./git --exec-path=$PWD checkout master
error: pathspec 'master' did not match any file(s) known to git.
hint: 'master' matched more than one remote tracking branch.
hint: We found 26 remotes with a reference that matched. So we fell back
hint: on trying to resolve the argument as a path, but failed there too!
hint:
hint: If you meant to check out a remote tracking branch on, e.g. 'origin',
hint: you can do so by fully qualifying the name with the --track option:
hint:
hint: git checkout --track origin/<name>
Note that the "error: pathspec[...]" message is still printed. This is
because whatever else checkout may have tried earlier, its final
fallback is to try to resolve the argument as a path. E.g. in this
case:
$ ./git --exec-path=$PWD checkout master pu
error: pathspec 'master' did not match any file(s) known to git.
error: pathspec 'pu' did not match any file(s) known to git.
There we don't print the "hint:" implicitly due to earlier logic
around the DWIM fallback. That fallback is only used if it looks like
we have one argument that might be a branch.
I can't think of an intrinsic reason for why we couldn't in some
future change skip printing the "error: pathspec[...]" error. However,
to do so we'd need to pass something down to checkout_paths() to make
it suppress printing an error on its own, and for us to be confident
that we're not silencing cases where those errors are meaningful.
I don't think that's worth it since determining whether that's the
case could easily change due to future changes in the checkout logic.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in doing this right now, but in later change the
"ret" variable will be inspected. This change makes that meaningful
change smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the previously added "num_matches" struct value up to the callers
of unique_tracking_name(). This will allow callers to optionally print
better error messages in a later change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use skip_prefix() instead of starts_with() and strcmp() when parsing
'git update-ref's stdin to avoid a couple of magic numbers.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse Y..." etc. misbehaved when given endpoints were
not committishes.
* en/rev-parse-invalid-range:
rev-parse: check lookup'ed commit references for NULL
The list of commands with their various attributes were spread
across a few places in the build procedure, but it now is getting a
bit more consolidated to allow more automation.
* nd/command-list:
completion: allow to customize the completable command list
completion: add and use --list-cmds=alias
completion: add and use --list-cmds=nohelpers
Move declaration for alias.c to alias.h
completion: reduce completable command list
completion: let git provide the completable command list
command-list.txt: documentation and guide line
help: use command-list.txt for the source of guides
help: add "-a --verbose" to list all commands with synopsis
git: support --list-cmds=list-<category>
completion: implement and use --list-cmds=main,others
git --list-cmds: collect command list in a string_list
git.c: convert --list-* to --list-cmds=*
Remove common-cmds.h
help: use command-list.h for common command list
generate-cmds.sh: export all commands to command-list.h
generate-cmds.sh: factor out synopsis extract code
Signed-off-by: Stefan Beller <sbeller@google.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
[jc: no need for remote to be const char *]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 73c3f0f704 (index-pack: check .gitmodules files with
--strict, 2018-05-04) added a call to add_packed_git(), with
the intent that the newly-indexed objects would be available
to the process when we run fsck_finish(). But that's not
what add_packed_git() does. It only allocates the struct,
and you must install_packed_git() on the result. So that
call was effectively doing nothing (except leaking a
struct).
But wait, we passed all of the tests! Does that mean we
don't need the call at all?
For normal cases, no. When we run "index-pack --stdin"
inside a repository, we write the new pack into the object
directory. If fsck_finish() needs to access one of the new
objects, then our initial lookup will fail to find it, but
we'll follow up by running reprepare_packed_git() and
looking again. That logic was meant to handle somebody else
repacking simultaneously, but it ends up working for us
here.
But there is a case that does need this, that we were not
testing. You can run "git index-pack foo.pack" on any file,
even when it is not inside the object directory. Or you may
not even be in a repository at all! This case fails without
doing the proper install_packed_git() call.
We can make this work by adding the install call.
Note that we should be prepared to handle add_packed_git()
failing. We can just silently ignore this case, though. If
fsck_finish() later needs the objects and they're not
available, it will complain itself. And if it doesn't
(because we were able to resolve the whole fsck in the first
pass), then it actually isn't an interesting error at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leak plugging.
* ma/unpack-trees-free-msgs:
unpack_trees_options: free messages when done
argv-array: return the pushed string from argv_push*()
merge-recursive: provide pair of `unpack_trees_{start,finish}()`
merge: setup `opts` later in `checkout_fast_forward()`
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
Error behaviour of "git grep" when it cannot read the index was
inconsistent with other commands that uses the index, which has
been corrected to error out early.
* sb/grep-die-on-unreadable-index:
grep: handle corrupt index files early
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (42 commits)
merge-one-file: compute empty blob object ID
add--interactive: compute the empty tree value
Update shell scripts to compute empty tree object ID
sha1_file: only expose empty object constants through git_hash_algo
dir: use the_hash_algo for empty blob object ID
sequencer: use the_hash_algo for empty tree object ID
cache-tree: use is_empty_tree_oid
sha1_file: convert cached object code to struct object_id
builtin/reset: convert use of EMPTY_TREE_SHA1_BIN
builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX
wt-status: convert two uses of EMPTY_TREE_SHA1_HEX
submodule: convert several uses of EMPTY_TREE_SHA1_HEX
sequencer: convert one use of EMPTY_TREE_SHA1_HEX
merge: convert empty tree constant to the_hash_algo
builtin/merge: switch tree functions to use object_id
builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo
sha1-file: add functions for hex empty tree and blob OIDs
builtin/receive-pack: avoid hard-coded constants for push certs
diff: specify abbreviation size in terms of the_hash_algo
upload-pack: replace use of several hard-coded constants
...
"git blame" learns to unhighlight uninteresting metadata from the
originating commit on lines that are the same as the previous one,
and also paint lines in different colors depending on the age of
the commit.
* sb/blame-color:
builtin/blame: add new coloring scheme config
builtin/blame: highlight recently changed lines
builtin/blame: dim uninteresting metadata lines
"git submodule update" and "git submodule add" supported the
"--reference" option to borrow objects from a neighbouring local
repository like "git clone" does, but lacked the more recent
invention "--dissociate". Also "git submodule add" has been taught
to take the "--progress" option.
* cf/submodule-progress-dissociate:
submodule: add --dissociate option to add/update commands
submodule: add --progress option to add command
submodule: clean up substitutions in script
"git status" learned to honor a new status.renames configuration to
skip rename detection, which could be useful for those who want to
do so without disabling the default rename detection done by the
"git diff" command.
* bp/status-rename-config:
add status config and command line options for rename detection
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
Code clean-up to adjust to a more recent lockfile API convention that
allows lockfile instances kept on the stack.
* ma/lockfile-cleanup:
lock_file: move static locks into functions
lock_file: make function-local locks non-static
refs.c: do not die if locking fails in `delete_pseudoref()`
refs.c: do not die if locking fails in `write_pseudoref()`
t/helper/test-write-cache: clean up lock-handling
The new help option --config-for-completion is a machine friendlier
version of --config where all the placeholders and wildcards are
dropped, leaving only the good, completable prefixes for
git-completion.bash to consume.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only benefit from this move (apart from cleaner code) is that
advice.amWorkDir should now show up in `git help --config`. There
should be no regression since advice config is always read by the
git_default_config().
While at there, use advise() like other code. We now get "hint: "
prefix and the output is stderr instead of stdout (which is also the
reason for the test update because stderr is checked in a following
test and the extra advice can fail it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.
This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
