This patch uses git-apply to do the patching which simplifies the code a lot
and also uses one pass to git-diff. git-apply gives information on added,
removed files as well as which files are binary.
Removed the test for checking for matching binary files when deleting them
since git-apply happily deletes the file. This is matter of taste since we
allow some fuzz for text patches also.
Error handling was cleaned up, but not much tested.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old code looked backwards from the email address to parse
the name, allowing an arbitrary number of spaces between the
two. However, in the case of no name, we looked back too far to
the 'author' (or 'Author:') header.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Jeff King originally fixed it by looking back only one
character; Johannes Schindelin pointed out that we could try
harder while at it to cope with commits with broken headers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Originally noticed by Nicolas Pitre; the real cause was the code
was prepared to deal with [PATCH] (and [PATCH n/m whatever])
prefixes but forgot that the string can be indented while acting
as a filter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
There are some baseless merge cases where git-merge-recursive will
try to compare one of the branches against the empty tree. However
most projects won't have the empty tree object in their object database
as Git does not normally create empty tree objects. If the empty tree
object is missing then the merge process will die, as it cannot load the
object from the database. The error message may make the user think that
their database is corrupt when its actually not.
So instead we should just create the empty tree object whenever it is
needed. If the object already exists as a loose object then no harm
done. Otherwise that loose object will be pruned away later by either
git-prune or git-prune-packed.
Thanks goes to Junio for suggesting this fix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-index-pack can call memcpy with overlapping source and destination
buffers. The patch below makes it use memmove instead.
If you want to demonstrate a failure, add the following two lines
+ if (input_offset < input_len)
+ abort ();
before the existing memcpy call (shown in the patch below),
and then run this:
(cd t; sh ./t5500-fetch-pack.sh)
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
No need to install manpages as executable. Noticed by Ville Skytt,Ad(B.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Take Johannes Schindelin's suggestions for a further simplification of
the shared repository creation using git --bare init-db --shared, and
for a simplified cvsimport using an existing CVS working directory.
Also insert more man page references.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cvs-migration.txt | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
The old code looked backwards from the email address to parse the name,
allowing an arbitrary number of spaces between the two. However, in the case
of no name, we looked back too far to the 'author' (or 'Author:') header.
Instead, remove at most one space between name and address.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch clarifies the meaning of the branch.*.merge option.
Previously, if branch.*.merge was specified but did not match any
ref, the message "No changes." was not really helpful regarding
the misconfiguration. This patch adds a warning for this.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit f848718a broke the build in perl/ directory by
allowing the Makefile.PL to overwrite the now-tracked Makefile.
Fix this by forcing Makefile.PL to produce its output in
perl.mak as the broken commit originally intended.
Signed-off-by: Junio C Hamano <junkio@cox.net>
do_switch works with the SVN Perl bindings after r22312 in the
Subversion trunk. Since no released version of SVN currently
supports it; we'll just autodetect it and enable its usage
when a user has a recent-enough version of SVN.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was introduced in 45a3b12cfd
Signed-off-by: Uwe Kleine-K,AC6(Bnig <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This may be an issue with repositories imported with commit
27a1a8014b or later, but before
commit dad73c0bb9.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-clone man page to reflect recent changes
(--use-separate-remote default and use of .git/config instead of
remotes files), and rewrite introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
At some point between v5.6 and 5.8 Perl started to assume its input,
output and filehandles are UTF-8. This breaks the counting of bytes
for the CVS protocol, resulting in the client expecting less data
than we actually send, and storing truncated files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the treshold is 5000. The likelihood of this value to ever be
crossed for a single push is really small making it not really useful.
The optimal treshold for a pure space saving on a filesystem with 4kb
blocks is 3. However this is likely to create many small packs
concentrating a large number of files in a single directory compared to
the same objects which are spread over 256 directories when loose. This
means we would need 512 objects per pack on average to approximagte the
same directory cost (a pack has 2 files because of the index).
But 512 is a really high value just like 5000 since most pushes are
unlikely to have that many objects. So let's try with a value of 100
which should have a good balance between small pushes going to be
exploded into loose objects and large pushes kept as whole packs.
This is not a replacement for periodic repacks of course.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Modify cvs-migration.txt so it explains first how to develop against a
shared repository, then how to set up a shared repository, then how to
import a repository from cvs. Though this seems chronologically
backwards, it's still readable in this order, and it puts the more
commonly needed material closer to the front.
Remove the annotate/pickaxe section; perhaps it can find a place elsewhere
in the future. Remove most of the "why git is better than cvs" stuff from
the introduction.
Add some minor clarifications, including two that have come up several
times on the mailing list:
1. Recommend committing any changes before running pull.
2. Note that changes must be commited before they can be pushed.
Update the clone discussion to reflect the new --use-separate-remotes
default, and add a brief mention of git-cvsserver.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit 3683dc5a broke the merge message generation with
a careless use of && where it was not needed, breaking the merge
message for cases where non branches are given.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Long-running fetches run inside children to avoid memory leaks.
When we refork, the connection in the parent can be idle for a
long time; attempting to reuse it in the next child can result
in timeouts.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow images in one of web formats (PNG, GIF, JPEG) - actually files
with mimetype of image/png, image/git, image/jpeg - to be displayed in
"blob" view using <img /> element, instead of using "blob_plain" view
for them, like for all other files except also text/* mimetype files.
This makes possible to easily go to file history, to HEAD version of
the file, to appropriate commit etc; all of those are not available
in "blob_plain" (raw) view.
Only text files can have "blame" view link in the formats part of
navbar.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While deciding if the new style command line argument is a tag
or a branch, we checked it with "git show-ref -s --verify" to
see if results in an error, but when it is not a branch, the
check leaked the error message out, which was not needed to be
shown to the end user.
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit a9cb3c6e changed git-commit to use the
contents of MERGE_MSG even when we do not have MERGE_HEAD (the
rationale is in its log message).
However, the change tricks the following sequence to include a
merge message in a completely unrelated commit:
$ git pull somewhere
: oops, the conflicts are too much. forget it.
$ git reset --hard
: work work work
$ git commit
To fix this confusion, this patch makes "git reset" to remove
the leftover MERGE_MSG that was prepared when the user abandoned
the merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Acked-by: Luben Tuikov <ltuikov@yahoo.com
Rename the section titles to make the "how-to" content of the section
obvious. Also clarify that changes have to be commited before they can
be pushed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It really is an important concept to grasp for people coming
from CVS. Even if it is briefly mentioned, it is not obvious
enough to sink in.
[jc: with wording updates from J. Bruce Fields]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document git diff options -b / --ignore-space-change and
-w / --ignore-all-space, introduced by Johannes Schindelin
in commit 0d21efa5, "Teach diff about -b and -w flags".
The description of options is taken from GNU diff man page and
GNU Diffutils info documentation.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is _not_ the same as "treat eol as whitespace", since that would mean
that multiple empty lines would be treated as equal to e.g. a space.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
receive-pack: do not insist on fast-forward outside refs/heads/
git-mv: search more precisely for source directory in index
Conflicts:
receive-pack.c
The structure that ends with a flexible array member (or 0
length array with older GCC) "char name[FLEX_ARRAY]" is
allocated on the stack and we use it after clearing its entire
size with memset. That does not guarantee that "name" is
properly NUL terminated as we intended on platforms with more
forgiving structure alignment requirements.
Reported breakage on m68k by Roman Zippel.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There was a little bug in the brace expansion which should remove
the ^{} from the tagname. It used ${name#'^{}'} instead of $(name%'^{}'},
the difference is that '#' will remove the given pattern only from the
beginning of a string and '%' only from the end of a string.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With making --use-separate-remote default when creating non-bare
clone, there was need for the flag which would turn off this behavior.
It was called --use-immingled-remote.
Immingle means to blend, to combine into one, to intermingle, but it
is a bit obscure word. I think it would be better to use simply
--no-separate-remote as the opposite to --use-separate-remote
option to git clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix contents of Atom feed <logo> element; it should be URL
of $logo, not URL pointed by logo link.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On Cygwin + ActivateState Perl, Makefile generated with
MakeMaker is not usable because of line-endings and
back-slashes.
This teaches perl/Makefile to write a handcrafted equivalent
perl.mak file with 'make NO_PERL_MAKEMAKER=NoThanks'.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus recommended this, otherwise any renames cause the
diffstat output to be ridiculous in some circumstances.
Because the corresponding "git-pull" done when the requestee
actually makes pull shows the stat with rename detection
enabled, it makes sense to match what the request message
includes to that output, to make the result easier to verify.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise, an executable script in git would end up being
checked into the CVS repository without the execute bit.
[jc: with an additional test script from Robin Rosenberg.]
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A move of a directory should find the entries in the index by
searching for the name _including_ the slash. Otherwise, the
directory can be shadowed by a file when it matches the prefix
and is lexicographically smaller, e.g. "ab.c" shadows "ab/".
Noticed by Sergey Vlasov.
[jc: added Sergey's original reproduction recipe as a test case
at the end of t7001.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
SVN is not entirely consistent in returning log information and
sometimes returns file information when adding subdirectories,
and sometimes it does not (only returning information about the
directory that was added). This caused git-svn to occasionally
add a file to the list of files to be fetched twice. Now we
change the data structure to be hash to avoid repeated fetches.
As of now (in master), this only affects repositories fetched
without deltas enabled (file://, and when manually overriden
with GIT_SVN_DELTA_FETCH=0); so this bug mainly affects users of
1.4.4.1 and maint.
Thanks to Florian Weimer for reporting this bug.
[jc: backported for maint]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a repository with core.warnambiguousrefs turned off, and with
a branch and a tag that have the same name 'frotz',
git merge frotz
would merge the commit pointed at by the tag 'frotz' but
incorrectly would identify what was merged as 'branch frotz' in
the merge message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fact that git has previously used symbolic links for representing
symbolic refs doesn't seem relevant to the current function of
git-symbolic-ref. This patch makes less of a big deal about the
symbolic link history and instead focuses on what git does now.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
'git diff --cached' still works, but its use is discouraged
in the documentation. 'git diff --index' does the same thing
and is consistent with how 'git apply --index' works.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this patch "git commit file.c file2.c" produces the not
so stellar output:
error: pathspec 'file.c' did not match any.
error: pathspec 'file2.c' did not match any.
With this patch, the output is changed to:
error: pathspec 'file.c' did not match any file(s) known to git.
error: pathspec 'file2.c' did not match any file(s) known to git.
Did you forget to 'git add'?
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The final 'nr_result' and 'written' values must always be the same
otherwise we're in deep trouble. So let's remove a redundent report.
And for paranoia sake let's make sure those two variables are actually
equal after all objects are written (one never knows).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* branch 'maint':
Document git-repo-config --bool/--int options.
tutorial: talk about user.name early and don't start with commit -a
git-blame: fix rev parameter handling.
