Some tests that depend on perl lacked PERL prerequisite to protect
them, breaking build with NO_PERL configuration.
* jk/no-perl-tests:
t960[34]: mark cvsimport tests as requiring perl
t0090: mark add-interactive test with PERL prerequisite
A request to store an empty note via "git notes" meant to remove
note from the object but with --allow-empty we will store a (surprise!)
note that is empty. In the longer run, we might want to deprecate
the somewhat unintuitive "emptying means deletion" behaviour.
* jh/empty-notes:
t3301: modernize style
notes: empty notes should be shown by 'git log'
builtin/notes: add --allow-empty, to allow storing empty notes
builtin/notes: split create_note() to clarify add vs. remove logic
builtin/notes: simplify early exit code in add()
builtin/notes: refactor note file path into struct note_data
builtin/notes: improve naming
t3301: verify that 'git notes' removes empty notes by default
builtin/notes: fix premature failure when trying to add the empty blob
"git checkout $treeish $path", when $path in the index and the
working tree already matched what is in $treeish at the $path,
still overwrote the $path unnecessarily.
* jk/checkout-from-tree:
checkout $tree: do not throw away unchanged index entries
If the user specifiers "normal" for a foreground color, this
should be a noop (while this may sound useless, it is the
only way to specify an unchanged foreground color followed
by a specific background color).
We also check that color "-1" does the same thing. This is
not documented, but has worked forever, so let's make sure
we keep supporting it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git-cvsimport is written in perl, which understandably
causes the tests to fail if you build with NO_PERL (which
will avoid building cvsimport at all). The earlier cvsimport
tests in t9600-t9602 are all marked with a PERL
prerequisite, but these ones are not.
The one in t9603 was likely not noticed because it is an
expected failure anyway.
The ones in t9604 have been around for a long time, but it
is likely that the combination of NO_PERL and having cvsps
installed is rare enough that nobody noticed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The add-interactive system is built in perl. If you build
with NO_PERL, running "git commit --interactive" will exit
with an error and the test will fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since time immemorial, the test of whether to set "core.filemode"
has been done by trying to toggle the u+x bit on $GIT_DIR/config,
which we know always exists, and then testing whether the change
"took". I find it somewhat odd to use the config file for this
test, but whatever.
The test code didn't set the u+x bit back to its original state
itself, instead relying on the subsequent call to git_config_set()
to re-write the config file with correct permissions.
But ever since
daa22c6f8d config: preserve config file permissions on edits (2014-05-06)
git_config_set() copies the permissions from the old config file to
the new one. This is a good change in and of itself, but it
invalidates the create_default_files()'s assumption, causing "git
init" to leave the executable bit set on $GIT_DIR/config.
Reset the permissions on $GIT_DIR/config when we are done with the
test in create_default_files().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
run_merge_tool() was not setting $status, which prevented the
exit code for builtin tools from being forwarded to the caller.
Capture the exit status and add a test to guarantee the behavior.
Reported-by: Adria Farres <14farresa@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make this test script appear somewhat less old-fashioned:
- Use test helper functions:
- write_script
- test_commit
- test_write_lines
- test_line_count
- test_config
- test_unconfig
- test_path_is_missing
- Remove whitespace between redirection operators and their targets.
- Move preparation of "expect" files into tests.
- Rename "output" files to "actual".
- More consistent quoting, especially around commands that might
expand to nothing.
- More visibility of important whitespace with ${indent}.
- Combine pairs of tests that unnecessarily split setup and verification.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Michael Blume <blume.mike@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we "git checkout $tree", we pull paths from $tree into
the index, and then check the resulting entries out to the
worktree. Our method for the first step is rather
heavy-handed, though; it clobbers the entire existing index
entry, even if the content is the same. This means we lose
our stat information, leading checkout_entry to later
rewrite the entire file with identical content.
Instead, let's see if we have the identical entry already in
the index, in which case we leave it in place. That lets
checkout_entry do the right thing. Our tests cover two
interesting cases:
1. We make sure that a file which has no changes is not
rewritten.
2. We make sure that we do update a file that is unchanged
in the index (versus $tree), but has working tree
changes. We keep the old index entry, and
checkout_entry is able to realize that our stat
information is out of date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test misused a URL "file://." to mean "relative to here",
which we no longer accept.
In a file:// URL, typically there is no host, and RFC1738 says that
file:///<path> should be used.
Update t5705 to use a working URL.
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has gone through the trouble of explicitly adding an empty
note, then "git log" should not silently skip it (as if it didn't exist).
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the "git notes" man page advertises that we support binary-safe
notes addition (using the -C option), we currently do not support adding
the empty note (i.e. using the empty blob to annotate an object). Instead,
an empty note is always treated as an intent to remove the note
altogether.
Introduce the --allow-empty option to the add/append/edit subcommands,
to explicitly allow an empty note to be stored into the notes tree.
Also update the documentation, and add test cases for the new option.
Reported-by: James H. Fisher <jhf@trifork.com>
Improved-by: Kyle J. McKay <mackyle@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases documenting the current behavior when trying to
add/append/edit empty notes. This is in preparation for adding
--allow-empty; to allow empty notes to be stored.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two tests recently added to t1410 create branches "a" and
"a/b" to test d/f conflicts on reflogs. Earlier, unrelated
tests in that script create the path "A/B" in the working
tree. There's no conflict on a case-sensitive filesystem,
but on a case-insensitive one, "git log" will complain that
"a/b" is both a revision and a working tree path.
We could fix this by using a "--" to disambiguate, but we
are probably better off using names that are less confusing
to make it more clear that they are unrelated to the working
tree files. This patch turns "a/b" into "one/two".
Reported-by: Michael Blume <blume.mike@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Corner-case bugfixes for "git fetch" around reflog handling.
* jk/fetch-reflog-df-conflict:
ignore stale directories when checking reflog existence
fetch: load all default config at startup
line-log tries to access all parents of a commit, but only the first
parent has been loaded if "--first-parent" is specified, resulting
in a crash.
Limit the number of parents to one if "--first-parent" is specified.
Reported-by: Eric N. Vander Weele <ericvw@gmail.com>
Signed-off-by: Tzvetan Mikov <tmikov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we update a ref, we have two rules for whether or not
we actually update the reflog:
1. If the reflog already exists, we will always append to
it.
2. If log_all_ref_updates is set, we will create a new
reflog file if necessary.
We do the existence check by trying to open the reflog file,
either with or without O_CREAT (depending on log_all_ref_updates).
If it fails, then we check errno to see what happened.
If we were not using O_CREAT and we got ENOENT, the file
doesn't exist, and we return success (there isn't a reflog
already, and we were not told to make a new one).
If we get EISDIR, then there is likely a stale directory
that needs to be removed (e.g., there used to be "foo/bar",
it was deleted, and the directory "foo" was left. Now we
want to create the ref "foo"). If O_CREAT is set, then we
catch this case, try to remove the directory, and retry our
open. So far so good.
But if we get EISDIR and O_CREAT is not set, then we treat
this as any other error, which is not right. Like ENOENT,
EISDIR is an indication that we do not have a reflog, and we
should silently return success (we were not told to create
it). Instead, the current code reports this as an error, and
we fail to update the ref at all.
Note that this is relatively unlikely to happen, as you
would have to have had reflogs turned on, and then later
turned them off (it could also happen due to a bug in fetch,
but that was fixed in the previous commit). However, it's
quite easy to fix: we just need to treat EISDIR like ENOENT
for the non-O_CREAT case, and silently return (note that
this early return means we can also simplify the O_CREAT
case).
Our new tests cover both cases (O_CREAT and non-O_CREAT).
The first one already worked, of course.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we start the git-fetch program, we call git_config to
load all config, but our callback only processes the
fetch.prune option; we do not chain to git_default_config at
all.
This means that we may not load some core configuration
which will have an effect. For instance, we do not load
core.logAllRefUpdates, which impacts whether or not we
create reflogs in a bare repository.
Note that I said "may" above. It gets even more exciting. If
we have to transfer actual objects as part of the fetch,
then we call fetch_pack as part of the same process. That
function loads its own config, which does chain to
git_default_config, impacting global variables which are
used by the rest of fetch. But if the fetch is a pure ref
update (e.g., a new ref which is a copy of an old one), we
skip fetch_pack entirely. So we get inconsistent results
depending on whether or not we have actual objects to
transfer or not!
Let's just load the core config at the start of fetch, so we
know we have it (we may also load it again as part of
fetch_pack, but that's OK; it's designed to be idempotent).
Our tests check both cases (with and without a pack). We
also check similar behavior for push for good measure, but
it already works as expected.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
Allow diff tool backend to stop early by exiting with a non-zero
status.
* da/difftool:
difftool: add support for --trust-exit-code
difftool--helper: exit when reading a prompt answer fails
In a tarball extract whose files are all read-only, running GPG
tests would have failed due to unwritable files.
* mg/lib-gpg-ro-safety:
t/lib-gpg: make gpghome files writable
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
Teach difftool to exit when a diff tool returns a non-zero exit
code when either --trust-exit-code is specified or
difftool.trustExitCode is true.
Forward exit codes from invoked diff tools to the caller when
--trust-exit-code is used.
Suggested-by: Adri Farr <14farresa@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-gpg.sh copies the test environment's gpg home to the trash
directory and makes sure the directoty is writable.
Make sure the copied files are writable, too.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An attempt to quit difftool by hitting Ctrl-D (EOF) at its prompt does
not quit it, but is treated as if 'yes' was answered to the prompt and
all following prompts, which is contrary to the user's intent. Fix the
error check.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Splitting pack-objects output into multiple packs is incompatible
with the use of reachability bitmap.
* jk/pack-objects-no-bitmap-when-splitting:
pack-objects: turn off bitmaps when we split packs
push --signed promises to take user.signingkey as the signing key but
fails to read the config.
Make it do so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow a temporary directory specified to be used while running "git
mergetool" backend.
* da/mergetool-temporary-directory:
t7610-mergetool: add test cases for mergetool.writeToTemp
mergetool: add an option for writing to a temporary directory
Allow "git mergetool --help" to run outside a Git repository.
* da/mergetool-tool-help:
difftool: don't assume that default sh is sane
mergetool: don't require a work tree for --tool-help
git-sh-setup: move GIT_DIR initialization into a function
mergetool: use more conservative temporary filenames
test-lib-functions: adjust style to match CodingGuidelines
t7610-mergetool: prefer test_config over git config
The clean-up of this test script was long overdue and is a very
welcome change.
* da/mergetool-tests:
test-lib-functions: adjust style to match CodingGuidelines
t7610-mergetool: use test_config to isolate tests
t7610-mergetool: add missing && and remove commented-out code
t7610-mergetool: use tabs instead of a mix of tabs and spaces
The API to update refs have been restructured to allow introducing
a true transactional updates later. We would even allow storing
refs in backends other than the traditional filesystem-based one.
* rs/ref-transaction: (25 commits)
ref_transaction_commit: bail out on failure to remove a ref
lockfile: remove unable_to_lock_error
refs.c: do not permit err == NULL
remote rm/prune: print a message when writing packed-refs fails
for-each-ref: skip and warn about broken ref names
refs.c: allow listing and deleting badly named refs
test: put tests for handling of bad ref names in one place
packed-ref cache: forbid dot-components in refnames
branch -d: simplify by using RESOLVE_REF_READING
branch -d: avoid repeated symref resolution
reflog test: test interaction with detached HEAD
refs.c: change resolve_ref_unsafe reading argument to be a flags field
refs.c: make write_ref_sha1 static
fetch.c: change s_update_ref to use a ref transaction
refs.c: ref_transaction_commit: distinguish name conflicts from other errors
refs.c: pass a list of names to skip to is_refname_available
refs.c: call lock_ref_sha1_basic directly from commit
refs.c: refuse to lock badly named refs in lock_ref_sha1_basic
rename_ref: don't ask read_ref_full where the ref came from
refs.c: pass the ref log message to _create/delete/update instead of _commit
...
A new filter to programatically edit the tail end of the commit log
messages.
* cc/interpret-trailers:
Documentation: add documentation for 'git interpret-trailers'
trailer: add tests for commands in config file
trailer: execute command from 'trailer.<name>.command'
trailer: add tests for "git interpret-trailers"
trailer: add interpret-trailers command
trailer: put all the processing together and print
trailer: parse trailers from file or stdin
trailer: process command line trailer arguments
trailer: read and process config information
trailer: process trailers from input message and arguments
trailer: add data structures and basic functions
Test scripts were taught to notice "-x" option to show shell trace,
as if the tests were run under "sh -x".
* jk/test-shell-trace:
test-lib.sh: support -x option for shell-tracing
t5304: use helper to report failure of "test foo = bar"
t5304: use test_path_is_* instead of "test -f"
This reverts commit 10f343ea81, whose
output is no longer bit-for-bit equivalent from the older versions
of Git, which the infrastructure to (pretend to) upload tarballs
kernel.org uses depends on.
Avoid:
# ./t1304-default-acl.sh
ok 1 - checking for a working acl setup
ok 2 - Setup test repo
not ok 3 - Objects creation does not break ACLs with restrictive umask
#
# # SHA1 for empty blob
# check_perms_and_acl .git/objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391
#
not ok 4 - git gc does not break ACLs with restrictive umask
#
# git gc &&
# check_perms_and_acl .git/objects/pack/*.pack
#
# failed 2 among 4 test(s)
1..4
on systems where USER isn't set. It's usually set by the login
process, but it isn't set when launching some Docker images. For
example:
$ docker run --rm debian env
HOME=/
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=b2dfdfe797ed
'id -u -n' has been in POSIX from Issue 2 through 2013 [1], so I don't
expect compatibility issues.
[1]: http://pubs.opengroup.org/onlinepubs/9699919799/utilities/id.html
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a pack.packSizeLimit is set, we may split the pack data
across multiple packfiles. This means we cannot generate
.bitmap files, as they require that all of the reachable
objects are in the same pack. We check that condition when
we are generating the list of objects to pack (and disable
bitmaps if we are not packing everything), but we forgot to
update it when we notice that we needed to split (which
doesn't happen until the actual write phase).
The resulting bitmaps are quite bogus (they mention entries
that do not exist in the pack!) and can cause a fetch or
push to send insufficient objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack all objects, we use only the objects reachable
from references and reflogs. This misses any objects which
are reachable from the index, but not yet referenced.
By itself this isn't a big deal; the objects can remain
loose until they are actually used in a commit. However, it
does create a problem when we drop packed but unreachable
objects. We try to optimize out the writing of objects that
we will immediately prune, which means we must follow the
same rules as prune in determining what is reachable. And
prune uses the index for this purpose.
This is rather uncommon in practice, as objects in the index
would not usually have been packed in the first place. But
it could happen in a sequence like:
1. You make a commit on a branch that references blob X.
2. You repack, moving X into the pack.
3. You delete the branch (and its reflog), so that X is
unreferenced.
4. You "git add" blob X so that it is now referenced only
by the index.
5. You repack again with git-gc. The pack-objects we
invoke will see that X is neither referenced nor
recent and not bother loosening it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no easy way to ask the revision traversal
machinery to include objects reachable from the index (e.g.,
blobs and trees that have not yet been committed). This
patch adds an option to do so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
