Now that git-add is a first class citizen in core Git (Nico's 366bfcb6)
users may start to expect the term 'add' to refer to the act of including
a file's changes into a commit. So I'm replacing all uses of the term
'Include' in the UI with 'Add'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has partial includes disabled then it doesn't matter what
state the working directory is in; if the file has been included in
the next commit its index state is A or M and we should immediately
run update-index on the working directory file to bring the index in
sync with the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a file has a merge conflict (index state = U) the user will need to
run update-index on that file to resolve all stages down to stage 0,
by including the file in the working directory.
Like core Git we'll just trust the user that their resolution is
correct, and that they didn't just include the file into the commit
while merge conflicts still exist within the file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This implementation of switch_branch is not yet finished, and thus
it throws a "NOT FINISHED" error rather than completing the switch.
But its a rough sketch of the procedure required.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since this list is really the set of refs which match "refs/heads/*" it
really is the set of heads and not necessarily the set of all branches,
as the remote tracking branches are not listed in this set, even if it
appears in the "refs/heads/*" namespace (e.g. an old style repository).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the user should not work on a tracking branch we automatically
hide any branch which is used as a tracking branch by either a
remote.<name>.fetch config entry or by a Pull: line in a remotes file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm not currently ready to implement branch switching, so I'm just
going to punt on it for now. :-)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Even though the user shouldn't have a remote branch checked out, if
they do we should still show as short of the branch name as possible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is an early start at branch management from within git-gui. The
branch menu has create/delete command entries to create and delete
branches as well as a list of radiobutton entries for each branch
found in the repository through for-each-ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently I missed the file state MD, which is a file modified and
updated in the index but then removed from the working directory. This
should be treated just like AD, an added file which has been deleted from
the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users want to know what branch they are sitting on before making a commit,
as they may need to switch to a different branch first.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users sometimes need to be able to throw away locally modified files
in order to go back to the last committed version of that file. To
perform a revert the user must first uninclude each file from the new
commit as the working file must at least partially match the index,
and we use git-checkout-index to update the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Just like prior to a commit its only an informational message that
we refuse to perform a pull on a dirty working directory. Therefore
we should not use an error icon.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since gitk is currently broken on Mac OS X and is unable to start itself
when given command line parameters just don't offer the "Visual All
Branches" menu option on Mac OS X.
Once this feature of gitk is fixed we should change this section of code
to make sure a working version of gitk will be executed before we offer
the option up to the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes its useful to start gitk with the --all option, to view all of
the known branches and tags within this repository. Rather than making
the user startup gitk and then edit the view we can pass the option along
for them.
This also makes it slightly more explicit, that when gitk starts up by
default its showing the current branch and not everything. Yes gitk
isn't showing that to the user, but the fact that the user had to make
a decision between seeing this current branch or all branches will
hopefully make them study gitk's display before jumping to a conclusion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because the Tcl binary distributed with Cygwin tends to not pass along
its own environment (the env array) to its children, its unlikely that
any Git commands spawned by git-gui will receive the same environment
variables that git-gui itself received from the shell which started it.
If the user is counting on environment variables to pass down, like say
GIT_INDEX_FILE, they may not, so we warn them during git-gui startup
that things may not work out as the user intended. Perhaps one day
when git-gui and git are running on native Windows (rather than through
the Cygwin emulation layers) things will work better.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Darwn based UNIX systems are not necessarily Mac OS X. However the only
windowing system used by Tk that is Mac OS X is 'aqua', and only 'aqua'
exists on Mac OS X. Therefore this is a more reliable test for the
Macintosh platform.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like the is_MacOSX proc we shouldn't keep repeating the platform test
for Windows. Instead abstract the code out into a procedure and use
the procedure whenever we need to do something special.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users may need to know what version of Tcl they are running git-gui
under, in case there is an interesting interface quirk or other
compatability problem we don't know about right now that we may
need to explore (and maybe fix). Since its simple enough to show
a line with this version data we should do so.
We also try to reduce the amount of text shown as often the Tcl and Tk
version numbers will be identical; when this happens we should only show
the one version number.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The copyright notice we display in the about dialog should be the same
as the one at the top of our source code. By putting the copyright
notice that appears at the top of our source code into a global variable
rather than a comment we can trivially make them the same at all times.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It is tradition for applications to store their about and preferences
menu options within the application menu. This is the first menu in
the menu bar, just after the apple menu. Apparently the way to access
this menu from Tk on Mac OS X systems is to create a special menu whose
name ends in ".apple" and place it into the menu bar.
So now if we are on Mac OS X we move our about menu and our options menu
into the application menu, like other Mac OS X applications.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Created a help menu with an about dialog box. This about dialog
shows the copyright notice for the application, the fact that it
is covered by the GPL v2.0 or later, the authors, and the current
version of Git it is invoking when users perform actions within it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since all of the actions in our Project menu actually apply to the
Git concept of a repository, it is a disservice to our users to
call it "project". This is especially true if Git ever gets any
sort of subproject support, as the term would then most definately
conflict.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The project menu is just too cluttered without using separator entries
to split out the database operations (such as repack and verify) from
the other options in the same menu.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It would be something of a disservice to our users if we refer to
fsck-objects as "verify". So instead we call it fsck-objects in
the console title, and indicate that's how we are verifying the
object database.
We probably should call our menu option "fsck-objects" or similar
but I really do think that "Verify Database" more accurately describes
the action then "fsck-objects" does, especially to users who aren't
file system developers.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we don't automatically restart in amend mode when we quit while
in amend mode the commit message buffer shouldn't be saved to GITGUI_MSG
as it would be misleading when the user restarts the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I recently found a need to run fsck-objects in a number of repositories
that I also use git-gui against. Tossing in a menu option to invoke
fsck-objects and have its output show up in a console window is simple
enough to do.
We probably need to enhance the console window used by fsck-objects,
like to open up the Git fsck-objects manual page and let the user see
what each message means (such as "dangling commit") and to also let the
user invoke prune, to cleanup any such dangling objects. But right now
I'm going to ignore that problem in favor of getting other more important
features implemented.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its useful to be able to amend the last commit even if it was a merge
commit, so we really should support that in the gui. We now do so by
making PARENT a list. We always diff against the first parent but we
create a commit consisting of the parent(s) listed in this list, in
order.
We also should recheck the repository state during an amend. Earlier
I was bitten by this exact bug when I switched branches through a
command prompt and then did not do a rescan in git-gui. When I hit
"Amend Last Commit" I was surprised to see information from the prior
branch appear. This was due to git-gui caching the data from the last
rescan and using that data form the amend data load request, rather than
the data of the current branch.
Improved error text in the dialogs used to tell the user why an amend is
being refused by git-gui. In general this is only during an initial
commit (nothing prior to amend) and during a merge commit (it is simply
too confusing to amend the last commit while also trying to complete a
merge).
Fixed a couple of minor bugs in the pull logic. Since this code isn't
really useful nobody has recently tested it and noticed the breakage.
It really needs to be rewritten anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In order to allow the user to toggle include/exclude from next commit
for files which were partially included in the last commit we need the
current index mode+sha1 data stored in our file_states array. For
any partially included file we have this information from diff-files,
so we just have to copy it over to the diff-index portion of our state
array.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The tags used for diff formatting (which I inherited from gitool) just
didn't make a whole lot of sense, especially if you wanted to try to
match them to the diff output you were seeing on screen. It did not
help that the diff-index -c output's first two columns are also munged
to make the diff output more user friendly.
So this is a large refactoring of the tags used for diff display. Now
our tag names match what we put in the left column of each line, which
makes it easier to correlate presentation and implementation.
I removed bold font usage from everything except the hunk headers as I
really did not like the way bold font caused column alignments to become
out of whack within the diff viewer. It also drew attention to the parts
of the file which were identically changed in both the index and in the
working directory, yet these are usually the parts I find myself caring
the least about. So its very counter-intuitive.
Lines which are changed differently by both the index and the working
directory are now shown with background colors which span the entire line,
making these lines easier to pick out of the diff. In general these are
the lines that appear to be more interesting to me when looking at the
3-way diff as they are the ones which contain recent and quite different
changes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
New files also lack index data from diff-files therefore we cannot use
their diff-files index data when we update-index. Instead we can use
the fact that Git has them hardcoded as "0 0{40}" and do the same thing
ourselves. This way you can toggle an untracked file into added status
and back out to untracked.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently core-git's diff utilities report a deleted symlink as a
deleted file with a mode of 120000. This is not nearly as user
friendly as one might like, as the user must remember that 120000
is the UNIX mode bits for a symlink. So instead we transform
the not-so-friendly message from core-git into a slightly more
user friendly "deleted symlink" message.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Tcl let me assign two different types of values to the variable $n.
Prior to 1461c5f3 $n was the total number of bytes in the string;
but in that commit it also became the current info list for the
current file. This caused $c < $n to fail as $n was now treated
as 0 and we only loaded the first file in each buffer.
So use a different variable, like $i, instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There was a bug with the way we handled deleted file status. A file
really shouldn't be in D_ state when it has been deleted, instead it
is really DD. Therefore we should have toggled _D to DD, not D_,
thereby letting us toggle back to _D.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user clicks on the icon associated with a file we now flip to the
inverse status. Partially included files first fully include, then fully
uninclude, as we don't keep track of intermediate partial inclusions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes the user may want to keep their working directory file to be
the same content but they don't want it to be part of the current commit
anymore. In this case we need to undo any changes made to the index
for that file (by reloading the info from HEAD or removing the file
from the index) but leave the working directory alone.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Turns out that we really don't need the Contents/PkgInfo file on Mac OS
10.4. The Finder will still launch the application properly without one.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The previous implementation of do_include_selection did not actually
add files in state _O (untracked, not added) into the repository when
they were in the selection and Commit->Include Selected Files was used.
This was due to the file state filtering logic being the same as that
of Commit->Include All Files, which only considers existing files.
Also fixed a minor issue with rejected attempts to amend an initial
commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its not an error that a rescan is required before commit; its just
something we do as a safety feature to try and ensure the user knows
what is going into this commit. So the dialog should use the info
icon (if one is used by the host OS) rather than the error icon.
Its also not "highly likely" that another Git program modified the
repository, its completely the case. There is no reason why the
repository would not match our last scanned state unless another
Git program modified the repository (or someone else did so by hand).
So don't be vague about it, own up to the issue and go on with our
business.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since git-commit also checks that the user has a GIT_COMMITTER_IDENT
value before it lets the user make a commit we should do the same check
here in git-gui. We cache the result and assume that the user won't
do something which would change the status of GIT_COMMITTER_IDENT while
we are running.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I was starting to find it annoying that once you entered the 'Amend Last'
mode there was no way to go back to the 'New Commit' mode without quitting
and restarting git-gui. Its just confusing for the end-user.
Now we can flip back and forth between a new commit and an amend commit
through a pair of radio buttons on the header of the commit buffer area
and through a pair of radio menu buttons in the Commit menu.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we immediately start a rescan operation, but do so slightly
delayed (by 1 ms, to let the UI show before we start forking off
git processes), we can't let the user try to activate any of the
restricted GUI commands before the 1 ms timer expires and we kick
off the rescan.
So now we lock the index before we enter the Tk event loop, ensuring
that it is impossible for the user to inject a conflicting UI event
before our rescan can begin.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the user selects a number of files they would typically expect
to be able to act on that selection, such as by including those files
into the next commit.
So we now have a menu option under the Commit menu that lets the user
include only the selection, rather than everything. If there is no
selection but there is a file in the diff viewer than we consider that
to be the selection (a selection of 1). Unfortunately we don't disable
this option yet when there's nothing selected to include, but this is
probably not a big deal as there are very few situations where there
are no selected files.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It just felt wrong to me that I was using _ as part of the mode argument
to display_file to mean "don't care/use existing" and * as part of
the mode argument to mean "force to _".
So instead use ? to mean "don't care/use existing" and _ to mean
"force to _". The code is a lot clearer this way and hopefully it
won't drive another developer insane, as it did me.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
