The hook script templates were hard coded to use /bin/sh and perl.
This patch ensures that they use the same tools specified for the rest
of the suite.
The impetus for the change was noticing that, as shipped, some of the
hooks used shell constructs that wouldn't work under Solaris' /bin/sh
(eg: $(cmd...) substitutions).
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This typo will lead to git-daemon dying any time the connect
string includes a port after the host= attribute. This can lead
for example to one of the following error messages on the client
side when someone tries git clone git://...:<port>.
When the daemon is running on localhost:
fatal: The remote end hung up unexpectedly
or when the daemon is connected through an ssh tunnel:
fatal: protocol error: bad line length character: erro
In the latter case 'erro' comes from the daemon's reply:
error: git-daemon died of signal 11
Signed-off-by: Imre Deak <imre.deak@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GNU make’s target-specific variables facility has one weird facet: any
variables set for a given target apply to all of its dependencies,
too. For example, when running “make exec_cmd.o”, since exec_cmd.o
depends on GIT-CFLAGS, the variable assignment in
exec_cmd.s exec_cmd.o: ALL_CFLAGS += \
'-DGIT_EXEC_PATH="$(gitexecdir_SQ)"' \
'-DBINDIR="$(bindir_relative_SQ)"' \
'-DPREFIX="$(prefix_SQ)"'
applies when refreshing GIT-CFLAGS, and the extra options get included
in the tracked compiler flags. If an object file like this is the
first target built, GIT-CFLAGS will appear to be out of date,
resulting in useless rebuilds and the dreaded “new build flags or
prefix” message.
This does not happen with every build because GIT-CFLAGS is only
refreshed once in a given “make” run, and usually the first target
does not set any variables. When this problem does rear its head, it
is very annoying.
So put target-specific flags in a separate EXTRA_CPPFLAGS variable
that is not included in $(TRACK_CFLAGS).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If CDPATH is set, "cd" prints its destination to stdout, causing
the common (cd a && tar cf - .) | (cd b && tar xf -) idiom to fail.
For example:
make -C templates DESTDIR='' install
make[1]: Entering directory `/users/e477610/exptool/src/git-1.7.0.2/templates'
install -d -m 755 '/home/e477610/exptool/share/git-core/templates'
(cd blt && gtar cf - .) | \
(cd '/home/e477610/exptool/share/git-core/templates' && umask 022 && gtar xof -)
gtar: This does not look like a tar archive
Most git scripts already protect against use of CDPATH through
git-sh-setup, but the Makefile doesn’t.
Reported-by: Michael Cox <mhcox@bluezoosoftware.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is supposed to check that git-remote correctly refuses to delete
all URLS for the specified remote which match the '.*' regular expression.
Since the '*' was not protected, it was interpreted by the shell as a file
glob and expanded before being passed to git-remote. The call to
git-remote still exited non-zero in this case, and the overall test still
passed, but it exited non-zero because git-remote was passed the incorrect
number of arguments, not for the reason it was supposed to fail.
Correct the test by escaping the '*'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getting the shortened branch name is as easy as using the shell's
parameter expansion.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script file uses utf-8 encoding but when sourced it will be read
using the default system encoding which is never utf8 on windows.
This causes the copyright symbol to display incorrectly in the about
dialog. Using the unicode escape sequence avoids incorrect decoding
but does require a double escape in the .po files.
Also adjusted the year range.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Help contributors use the correct indentation style.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This just messes up the system colors. Leave them alone.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
In the View → Edit View... dialog, the "Remember this view" option
always starts out unset. Using the dialog to change an existing view
and ignoring the parts of the dialog that aren’t relevant results in
both the old and new versions of the view being lost.
The cause: right after newviewopts($curview,perm) is set to an
appropriate value, decode_view_opts is clobbering it with the default
value. If that call is moved a little earlier, the "Remember this
view" option gets properly set to its previous value, fixing the
problem.
Reported-by: Steve Cotton <steve0001@s.cotton.clara.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Summarize these functions to save the reader some time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Instead of setting the font for specific widgets, set the font for the
widget type. If themed widgets are not available, this is via the X
resources. If themed widgets are available, the theme font is used.
The exception is the SHA1 ID which is forced to use the fixed-width
font, even where themed widgets are used.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Use the X resources to set the font, removing the need to set the font
for specific widgets.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
To make the user experience between git gui and gitk more homogeneous,
use Ctrl-W in gitk for closing the active window. When closing the
main window doquit is called for proper cleanup.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
acd2a45 (Refuse updating the current branch in a non-bare repository
via push, 2009-02-11) changed the default to refuse such a push, but
it forgot to update the docs.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already complete HEAD, of course, and might as well complete the other
common refs mentioned in the rev-parse man page: FETCH_HEAD, ORIG_HEAD, and
MERGE_HEAD.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in 2005 when this document was written, it may have made sense to
introduce ‘git fsck’ (then ‘git fsck-objects’) as the very first example
command for new users of Git 0.99.9. Now that Git has been stable for
years and does not actually tend to eat your data, it makes significantly
less sense. In fact, it sends an entirely wrong message.
‘git gc’ is also unnecessary for the purposes of this document, especially
with gc.auto enabled by default.
The only other commands in the “Basic Repository” section were ‘git init’
and ‘git clone’. ‘clone’ is already listed in the “Participant” section,
so move ‘init’ to the “Standalone” section and get rid of “Basic
Repository” entirely.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous error message "fatal: Needed a single revision" is not
very informative.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When NO_SOCKADDR_STORAGE is set for a platform, either sockaddr_in or
sockaddr_in6 is used intead. Neither of which has an ss_family member.
They have an sin_family and sin6_family member respectively. Since the
addrcmp() function accesses the ss_family member of a sockaddr_storage
struct, compilation fails on platforms which define NO_SOCKADDR_STORAGE.
Since any sockaddr_* structure can be cast to a struct sockaddr and
have its sa_family member read, do so here to workaround this issue.
Thanks to Martin Storsjö for pointing out the fix, and Gary Vaughan
for drawing attention to the issue.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris only uses one colon in the listing of the ACL mask, Linux uses two,
so substitute egrep for grep and make the second colon optional.
The -q option for Solaris 7's /usr/xpg4/bin/egrep does not appear to be
implemented, so redirect output to /dev/null.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of setfacl do not recalculate the effective rights
mask when the ACL is modified. So, set the effective rights mask
explicitly to ensure that the ACL's that are set on the directories will
have effect.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was using the group read permission bit as an indicator of the
default ACL mask. This behavior is valid on Linux but not on other
platforms like Solaris. So, rather than looking at mode bits, just test
readability for the user. This, along with the checks for the existence
of the ACL's that were set on the parent directories, should be enough.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the Linux setfacl man page, in order for an ACL to be valid,
the following rules must be satisfied:
* Whenever an ACL contains any Default ACL entries, the three Default
ACL base entries (default owner, default group, and default others)
must also exist.
* Whenever a Default ACL contains named user entries or named group
objects, it must also contain a default effective rights mask.
Some implementations of setfacl (Linux) do this automatically when
necessary, some (Solaris) do not. Solaris's setfacl croaks when trying to
create a default user ACL if the above rules are not satisfied. So, create
them before modifying the default user ACL's.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (Solaris) have a setfacl whose -d switch works differently
than the one on Linux. On Linux, it causes all operations to be applied
to the Default ACL. There is a notation for operating on the Default ACL:
[d[efault]:] [u[ser]:]uid [:perms]
so use it instead of the -d switch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey noticed that t5505 had accidentally broken its && chain,
hiding inconsistency between the code that writes the warning to the
standard output and the test that expects to see the warning on the
standard error, which was introduced by f8948e2 (remote prune: warn
dangling symrefs, 2009-02-08).
It turns out that the issue is deeper than that. After f8948e2, a symref
that is dangling is marked with a NULL sha1, and the idea of using NULL
sha1 to mean a deleted ref was scrapped, but somehow a follow-up eafb452
(do_one_ref(): null_sha1 check is not about broken ref, 2009-07-22)
incorrectly reorganized do_one_ref(), still thinking NULL sha1 is never
used in the code.
Fix this by:
- adopt Brandon's fix to t5505 test;
- introduce REF_BROKEN flag to mark a ref that fails to resolve (dangling
symref);
- move the check for broken ref back inside the "if we are skipping
dangling refs" code block.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If context lines are to be printed, grep separates them with hunk marks
("--\n"). These marks are printed between matches from different files,
too. They are not printed before the first file, though.
Threading was disabled when context line printing was enabled because
avoiding to print the mark before the first line was an unsolved
synchronisation problem. This patch separates the code for printing
hunk marks for the threaded and the unthreaded case, allowing threading
to be turned on together with the common -ABC options.
->show_hunk_mark, which controls printing of hunk marks between files in
show_line(), is now set in grep_buffer_1(), but only if some results
have already been printed and threading is disabled. The threaded case
is handled in work_done().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the description of the 2-tree merge by defining the terms
which are used in the table, and by applying some small linguistic
changes.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc takes the first non-space character in the first line of the
paragraph as a reference point for preformatted layout, so adjust to
that to make the table align.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sd/format-patch-to:
send-email: add --no-cc, --no-to, and --no-bcc
format-patch: add --no-cc, --no-to, and --no-add-headers
format-patch: use a string_list for headers
Add 'git format-patch --to=' option and 'format.to' configuration variable.
* tc/http-cleanup:
remote-curl: init walker only when needed
remote-curl: use http_fetch_ref() instead of walker wrapper
http: init and cleanup separately from http-walker
http-walker: cleanup more thoroughly
http-push: remove "|| 1" to enable verbose check
t554[01]-http-push: refactor, add non-ff tests
t5541-http-push: check that ref is unchanged for non-ff test
* tc/transport-verbosity:
transport: update flags to be in running order
fetch and pull: learn --progress
push: learn --progress
transport->progress: use flag authoritatively
clone: support multiple levels of verbosity
push: support multiple levels of verbosity
fetch: refactor verbosity option handling into transport.[ch]
Documentation/git-push: put --quiet before --verbose
Documentation/git-pull: put verbosity options before merge/fetch ones
Documentation/git-clone: mention progress in -v
Conflicts:
transport.h
* ld/push-porcelain:
t5516: Use test_cmp when appropriate
git-push: add tests for git push --porcelain
git-push: make git push --porcelain print "Done"
git-push: send "To <remoteurl>" messages to the standard output in --porcelain mode
git-push: fix an advice message so it goes to stderr
Conflicts:
transport.c
* jh/notes: (33 commits)
Documentation: fix a few typos in git-notes.txt
notes: fix malformed tree entry
builtin-notes: Minor (mostly parse_options-related) fixes
builtin-notes: Add "copy" subcommand for copying notes between objects
builtin-notes: Misc. refactoring of argc and exit value handling
builtin-notes: Add -c/-C options for reusing notes
builtin-notes: Refactor handling of -F option to allow combining -m and -F
builtin-notes: Deprecate the -m/-F options for "git notes edit"
builtin-notes: Add "append" subcommand for appending to note objects
builtin-notes: Add "add" subcommand for adding notes to objects
builtin-notes: Add --message/--file aliases for -m/-F options
builtin-notes: Add "list" subcommand for listing note objects
Documentation: Generalize git-notes docs to 'objects' instead of 'commits'
builtin-notes: Add "prune" subcommand for removing notes for missing objects
Notes API: prune_notes(): Prune notes that belong to non-existing objects
t3305: Verify that removing notes triggers automatic fanout consolidation
builtin-notes: Add "remove" subcommand for removing existing notes
Teach builtin-notes to remove empty notes
Teach notes code to properly preserve non-notes in the notes tree
t3305: Verify that adding many notes with git-notes triggers increased fanout
...
Conflicts:
Makefile
git rebase allows you to specify a non-branch commit-ish as the "branch"
argument, which leaves HEAD detached when it's finished. This is
occasionally useful, and this patch brings the same functionality to git
rebase --interactive.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new functions maildomain_net(), maildomain_mta() and
maildomain(), which return FQDN where possible for use in
send_message(). The value is passed to Net::SMTP HELO/EHLO
handshake. The domain name can also be set via new --smtp-domain
option.
The default value in Net::SMTP may not get through:
Net::SMTP=GLOB(0x267ec28)>>> EHLO localhost.localdomain
Net::SMTP=GLOB(0x267ec28)<<< 550 EHLO argument does not match calling host
whereas using the FQDN that matches the IP, the result is:
Net::SMTP=GLOB(0x15b8e80)>>> EHLO host.example.com
Net::SMTP=GLOB(0x15b8e80)<<< 250-host.example.com Hello host.example.com [192.168.1.7]
The maildomain*() code is based on ideas in Perl library
Test::Reporter by Graham Barr <gbarr@pobox.com> and Mark Overmeer
<mailtools@overmeer.net> released under the same terms as Perl
itself.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we walk the directory tree, if we see an ignored path, we
want to add it to the ignored list only if it matches any
pathspec that we were given. We used to check for the
pathspec to appear explicitly. E.g., if we see "subdir/file"
and it is excluded, we check to see if we have "subdir/file"
in our pathspec.
However, this interacts badly with the optimization to avoid
recursing into ignored subdirectories. If "subdir" as a
whole is ignored, then we never recurse, and consider only
whether "subdir" itself is in our pathspec. It would not
match a pathspec of "subdir/file" explicitly, even though it
is the reason that subdir/file would be excluded.
This manifests itself to the user as "git add subdir/file"
failing to correctly note that the pathspec was ignored.
This patch extends the in_pathspec logic to include prefix
directory case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test is to prepare an empty file "camelcase" in the index, remove
and replace it with another file "CamelCase" with "1" as its contents
in the working tree, and add it to the index, in a repository configured
to be case insensitive.
However, the test actually checked ls-files knows about a pathname that
matches "camelcase" case insensitively. It didn't check if the added
contents actually was the updated one.
Mark the test as non-working.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 submodules are considered dirty when they contain untracked
files. But when git status is called with the "-uno" option, the user
asked to ignore untracked files, so they must be ignored in submodules
too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
don't use default revision if a rev was specified
for_each_recent_reflog_ent(): use strbuf, fix offset handling
t/Makefile: remove test artifacts upon "make clean"
blame: fix indent of line numbers
If a revision is specified, it happens not to have any commits, don't
use the default revision. By doing so, surprising and undesired
behavior can happen, such as showing the reflog for HEAD when a branch
was specified.
[jc: squashed a test from René]
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
