The `%w(width,indent1,indent2)` formatting directive can be used to
rewrap text to a specific width and is designed after git-shortlog(1)'s
`-w` parameter. While the three parameters are all stored as `size_t`
internally, `strbuf_add_wrapped_text()` accepts integers as input. As a
result, the casted integers may overflow. As these now-negative integers
are later on passed to `strbuf_addchars()`, we will ultimately run into
implementation-defined behaviour due to casting a negative number back
to `size_t` again. On my platform, this results in trying to allocate
9000 petabyte of memory.
Fix this overflow by using `cast_size_t_to_int()` so that we reject
inputs that cannot be represented as an integer.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a formatting directive has a `+` or ` ` after the `%`, then we add
either a line feed or space if the placeholder expands to a non-empty
string. In specific cases though this logic doesn't work as expected,
and we try to add the character even in the case where the formatting
directive is empty.
One such pattern is `%w(1)%+d%+w(2)`. `%+d` expands to reference names
pointing to a certain commit, like in `git log --decorate`. For a tagged
commit this would for example expand to `\n (tag: v1.0.0)`, which has a
leading newline due to the `+` modifier and a space added by `%d`. Now
the second wrapping directive will cause us to rewrap the text to
`\n(tag:\nv1.0.0)`, which is one byte shorter due to the missing leading
space. The code that handles the `+` magic now notices that the length
has changed and will thus try to insert a leading line feed at the
original posititon. But as the string was shortened, the original
position is past the buffer's boundary and thus we die with an error.
Now there are two issues here:
1. We check whether the buffer length has changed, not whether it
has been extended. This causes us to try and add the character
past the string boundary.
2. The current logic does not make any sense whatsoever. When the
string got expanded due to the rewrap, putting the separator into
the original position is likely to put it somewhere into the
middle of the rewrapped contents.
It is debatable whether `%+w()` makes any sense in the first place.
Strictly speaking, the placeholder never expands to a non-empty string,
and consequentially we shouldn't ever accept this combination. We thus
fix the bug by simply refusing `%+w()`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An out-of-bounds read can be triggered when parsing an incomplete
padding format string passed via `--pretty=format` or in Git archives
when files are marked with the `export-subst` gitattribute.
This bug exists since we have introduced support for truncating output
via the `trunc` keyword a7f01c6b4d (pretty: support truncating in %>, %<
and %><, 2013-04-19). Before this commit, we used to find the end of the
formatting string by using strchr(3P). This function returns a `NULL`
pointer in case the character in question wasn't found. The subsequent
check whether any character was found thus simply checked the returned
pointer. After the commit we switched to strcspn(3P) though, which only
returns the offset to the first found character or to the trailing NUL
byte. As the end pointer is now computed by adding the offset to the
start pointer it won't be `NULL` anymore, and as a consequence the check
doesn't do anything anymore.
The out-of-bounds data that is being read can in fact end up in the
formatted string. As a consequence, it is possible to leak memory
contents either by calling git-log(1) or via git-archive(1) when any of
the archived files is marked with the `export-subst` gitattribute.
==10888==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x602000000398 at pc 0x7f0356047cb2 bp 0x7fff3ffb95d0 sp 0x7fff3ffb8d78
READ of size 1 at 0x602000000398 thread T0
#0 0x7f0356047cb1 in __interceptor_strchrnul /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:725
#1 0x563b7cec9a43 in strbuf_expand strbuf.c:417
#2 0x563b7cda7060 in repo_format_commit_message pretty.c:1869
#3 0x563b7cda8d0f in pretty_print_commit pretty.c:2161
#4 0x563b7cca04c8 in show_log log-tree.c:781
#5 0x563b7cca36ba in log_tree_commit log-tree.c:1117
#6 0x563b7c927ed5 in cmd_log_walk_no_free builtin/log.c:508
#7 0x563b7c92835b in cmd_log_walk builtin/log.c:549
#8 0x563b7c92b1a2 in cmd_log builtin/log.c:883
#9 0x563b7c802993 in run_builtin git.c:466
#10 0x563b7c803397 in handle_builtin git.c:721
#11 0x563b7c803b07 in run_argv git.c:788
#12 0x563b7c8048a7 in cmd_main git.c:923
#13 0x563b7ca99682 in main common-main.c:57
#14 0x7f0355e3c28f (/usr/lib/libc.so.6+0x2328f)
#15 0x7f0355e3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#16 0x563b7c7fe0e4 in _start ../sysdeps/x86_64/start.S:115
0x602000000398 is located 0 bytes to the right of 8-byte region [0x602000000390,0x602000000398)
allocated by thread T0 here:
#0 0x7f0356072faa in __interceptor_strdup /usr/src/debug/gcc/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x563b7cf7317c in xstrdup wrapper.c:39
#2 0x563b7cd9a06a in save_user_format pretty.c:40
#3 0x563b7cd9b3e5 in get_commit_format pretty.c:173
#4 0x563b7ce54ea0 in handle_revision_opt revision.c:2456
#5 0x563b7ce597c9 in setup_revisions revision.c:2850
#6 0x563b7c9269e0 in cmd_log_init_finish builtin/log.c:269
#7 0x563b7c927362 in cmd_log_init builtin/log.c:348
#8 0x563b7c92b193 in cmd_log builtin/log.c:882
#9 0x563b7c802993 in run_builtin git.c:466
#10 0x563b7c803397 in handle_builtin git.c:721
#11 0x563b7c803b07 in run_argv git.c:788
#12 0x563b7c8048a7 in cmd_main git.c:923
#13 0x563b7ca99682 in main common-main.c:57
#14 0x7f0355e3c28f (/usr/lib/libc.so.6+0x2328f)
#15 0x7f0355e3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#16 0x563b7c7fe0e4 in _start ../sysdeps/x86_64/start.S:115
SUMMARY: AddressSanitizer: heap-buffer-overflow /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:725 in __interceptor_strchrnul
Shadow bytes around the buggy address:
0x0c047fff8020: fa fa fd fd fa fa 00 06 fa fa 05 fa fa fa fd fd
0x0c047fff8030: fa fa 00 02 fa fa 06 fa fa fa 05 fa fa fa fd fd
0x0c047fff8040: fa fa 00 07 fa fa 03 fa fa fa fd fd fa fa 00 00
0x0c047fff8050: fa fa 00 01 fa fa fd fd fa fa 00 00 fa fa 00 01
0x0c047fff8060: fa fa 00 06 fa fa 00 06 fa fa 05 fa fa fa 05 fa
=>0x0c047fff8070: fa fa 00[fa]fa fa fd fa fa fa fd fd fa fa fd fd
0x0c047fff8080: fa fa fd fd fa fa 00 00 fa fa 00 fa fa fa fd fa
0x0c047fff8090: fa fa fd fd fa fa 00 00 fa fa fa fa fa fa fa fa
0x0c047fff80a0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff80b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c047fff80c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==10888==ABORTING
Fix this bug by checking whether `end` points at the trailing NUL byte.
Add a test which catches this out-of-bounds read and which demonstrates
that we used to write out-of-bounds data into the formatted message.
Reported-by: Markus Vervier <markus.vervier@x41-dsec.de>
Original-patch-by: Markus Vervier <markus.vervier@x41-dsec.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the `%>>(<N>)` pretty formatter, you can ask git-log(1) et al to
steal spaces. To do so we need to look ahead of the next token to see
whether there are spaces there. This loop takes into account ANSI
sequences that end with an `m`, and if it finds any it will skip them
until it finds the first space. While doing so it does not take into
account the buffer's limits though and easily does an out-of-bounds
read.
Add a test that hits this behaviour. While we don't have an easy way to
verify this, the test causes the following failure when run with
`SANITIZE=address`:
==37941==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000000baf at pc 0x55ba6f88e0d0 bp 0x7ffc84c50d20 sp 0x7ffc84c50d10
READ of size 1 at 0x603000000baf thread T0
#0 0x55ba6f88e0cf in format_and_pad_commit pretty.c:1712
#1 0x55ba6f88e7b4 in format_commit_item pretty.c:1801
#2 0x55ba6f9b1ae4 in strbuf_expand strbuf.c:429
#3 0x55ba6f88f020 in repo_format_commit_message pretty.c:1869
#4 0x55ba6f890ccf in pretty_print_commit pretty.c:2161
#5 0x55ba6f7884c8 in show_log log-tree.c:781
#6 0x55ba6f78b6ba in log_tree_commit log-tree.c:1117
#7 0x55ba6f40fed5 in cmd_log_walk_no_free builtin/log.c:508
#8 0x55ba6f41035b in cmd_log_walk builtin/log.c:549
#9 0x55ba6f4131a2 in cmd_log builtin/log.c:883
#10 0x55ba6f2ea993 in run_builtin git.c:466
#11 0x55ba6f2eb397 in handle_builtin git.c:721
#12 0x55ba6f2ebb07 in run_argv git.c:788
#13 0x55ba6f2ec8a7 in cmd_main git.c:923
#14 0x55ba6f581682 in main common-main.c:57
#15 0x7f2d08c3c28f (/usr/lib/libc.so.6+0x2328f)
#16 0x7f2d08c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#17 0x55ba6f2e60e4 in _start ../sysdeps/x86_64/start.S:115
0x603000000baf is located 1 bytes to the left of 24-byte region [0x603000000bb0,0x603000000bc8)
allocated by thread T0 here:
#0 0x7f2d08ebe7ea in __interceptor_realloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:85
#1 0x55ba6fa5b494 in xrealloc wrapper.c:136
#2 0x55ba6f9aefdc in strbuf_grow strbuf.c:99
#3 0x55ba6f9b0a06 in strbuf_add strbuf.c:298
#4 0x55ba6f9b1a25 in strbuf_expand strbuf.c:418
#5 0x55ba6f88f020 in repo_format_commit_message pretty.c:1869
#6 0x55ba6f890ccf in pretty_print_commit pretty.c:2161
#7 0x55ba6f7884c8 in show_log log-tree.c:781
#8 0x55ba6f78b6ba in log_tree_commit log-tree.c:1117
#9 0x55ba6f40fed5 in cmd_log_walk_no_free builtin/log.c:508
#10 0x55ba6f41035b in cmd_log_walk builtin/log.c:549
#11 0x55ba6f4131a2 in cmd_log builtin/log.c:883
#12 0x55ba6f2ea993 in run_builtin git.c:466
#13 0x55ba6f2eb397 in handle_builtin git.c:721
#14 0x55ba6f2ebb07 in run_argv git.c:788
#15 0x55ba6f2ec8a7 in cmd_main git.c:923
#16 0x55ba6f581682 in main common-main.c:57
#17 0x7f2d08c3c28f (/usr/lib/libc.so.6+0x2328f)
#18 0x7f2d08c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#19 0x55ba6f2e60e4 in _start ../sysdeps/x86_64/start.S:115
SUMMARY: AddressSanitizer: heap-buffer-overflow pretty.c:1712 in format_and_pad_commit
Shadow bytes around the buggy address:
0x0c067fff8120: fa fa fd fd fd fa fa fa fd fd fd fa fa fa fd fd
0x0c067fff8130: fd fd fa fa fd fd fd fd fa fa fd fd fd fa fa fa
0x0c067fff8140: fd fd fd fa fa fa fd fd fd fa fa fa fd fd fd fa
0x0c067fff8150: fa fa fd fd fd fd fa fa 00 00 00 fa fa fa fd fd
0x0c067fff8160: fd fa fa fa fd fd fd fa fa fa fd fd fd fa fa fa
=>0x0c067fff8170: fd fd fd fa fa[fa]00 00 00 fa fa fa 00 00 00 fa
0x0c067fff8180: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff8190: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff81a0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff81b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c067fff81c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Luckily enough, this would only cause us to copy the out-of-bounds data
into the formatted commit in case we really had an ANSI sequence
preceding our buffer. So this bug likely has no security consequences.
Fix it regardless by not traversing past the buffer's start.
Reported-by: Patrick Steinhardt <ps@pks.im>
Reported-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using a padding specifier in the pretty format passed to git-log(1)
we need to calculate the string length in several places. These string
lengths are stored in `int`s though, which means that these can easily
overflow when the input lengths exceeds 2GB. This can ultimately lead to
an out-of-bounds write when these are used in a call to memcpy(3P):
==8340==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7f1ec62f97fe at pc 0x7f2127e5f427 bp 0x7ffd3bd63de0 sp 0x7ffd3bd63588
WRITE of size 1 at 0x7f1ec62f97fe thread T0
#0 0x7f2127e5f426 in __interceptor_memcpy /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827
#1 0x5628e96aa605 in format_and_pad_commit pretty.c:1762
#2 0x5628e96aa7f4 in format_commit_item pretty.c:1801
#3 0x5628e97cdb24 in strbuf_expand strbuf.c:429
#4 0x5628e96ab060 in repo_format_commit_message pretty.c:1869
#5 0x5628e96acd0f in pretty_print_commit pretty.c:2161
#6 0x5628e95a44c8 in show_log log-tree.c:781
#7 0x5628e95a76ba in log_tree_commit log-tree.c:1117
#8 0x5628e922bed5 in cmd_log_walk_no_free builtin/log.c:508
#9 0x5628e922c35b in cmd_log_walk builtin/log.c:549
#10 0x5628e922f1a2 in cmd_log builtin/log.c:883
#11 0x5628e9106993 in run_builtin git.c:466
#12 0x5628e9107397 in handle_builtin git.c:721
#13 0x5628e9107b07 in run_argv git.c:788
#14 0x5628e91088a7 in cmd_main git.c:923
#15 0x5628e939d682 in main common-main.c:57
#16 0x7f2127c3c28f (/usr/lib/libc.so.6+0x2328f)
#17 0x7f2127c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#18 0x5628e91020e4 in _start ../sysdeps/x86_64/start.S:115
0x7f1ec62f97fe is located 2 bytes to the left of 4831838265-byte region [0x7f1ec62f9800,0x7f1fe62f9839)
allocated by thread T0 here:
#0 0x7f2127ebe7ea in __interceptor_realloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:85
#1 0x5628e98774d4 in xrealloc wrapper.c:136
#2 0x5628e97cb01c in strbuf_grow strbuf.c:99
#3 0x5628e97ccd42 in strbuf_addchars strbuf.c:327
#4 0x5628e96aa55c in format_and_pad_commit pretty.c:1761
#5 0x5628e96aa7f4 in format_commit_item pretty.c:1801
#6 0x5628e97cdb24 in strbuf_expand strbuf.c:429
#7 0x5628e96ab060 in repo_format_commit_message pretty.c:1869
#8 0x5628e96acd0f in pretty_print_commit pretty.c:2161
#9 0x5628e95a44c8 in show_log log-tree.c:781
#10 0x5628e95a76ba in log_tree_commit log-tree.c:1117
#11 0x5628e922bed5 in cmd_log_walk_no_free builtin/log.c:508
#12 0x5628e922c35b in cmd_log_walk builtin/log.c:549
#13 0x5628e922f1a2 in cmd_log builtin/log.c:883
#14 0x5628e9106993 in run_builtin git.c:466
#15 0x5628e9107397 in handle_builtin git.c:721
#16 0x5628e9107b07 in run_argv git.c:788
#17 0x5628e91088a7 in cmd_main git.c:923
#18 0x5628e939d682 in main common-main.c:57
#19 0x7f2127c3c28f (/usr/lib/libc.so.6+0x2328f)
#20 0x7f2127c3c349 in __libc_start_main (/usr/lib/libc.so.6+0x23349)
#21 0x5628e91020e4 in _start ../sysdeps/x86_64/start.S:115
SUMMARY: AddressSanitizer: heap-buffer-overflow /usr/src/debug/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827 in __interceptor_memcpy
Shadow bytes around the buggy address:
0x0fe458c572a0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572b0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572d0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0fe458c572e0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
=>0x0fe458c572f0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa[fa]
0x0fe458c57300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0fe458c57340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==8340==ABORTING
The pretty format can also be used in `git archive` operations via the
`export-subst` attribute. So this is what in our opinion makes this a
critical issue in the context of Git forges which allow to download an
archive of user supplied Git repositories.
Fix this vulnerability by using `size_t` instead of `int` to track the
string lengths. Add tests which detect this vulnerability when Git is
compiled with the address sanitizer.
Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com>
Original-patch-by: Joern Schneeweisz <jschneeweisz@gitlab.com>
Modified-by: Taylor Blau <me@ttalorr.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow tests that assume a 64-bit `size_t` to be skipped in 32-bit
platforms and regardless of the size of `long`.
This imitates the `LONG_IS_64BIT` prerequisite.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar as with the preceding commit, start ignoring gitattributes files
that are overly large to protect us against out-of-bounds reads and
writes caused by integer overflows. Unfortunately, we cannot just define
"overly large" in terms of any preexisting limits in the codebase.
Instead, we choose a very conservative limit of 100MB. This is plenty of
room for specifying gitattributes, and incidentally it is also the limit
for blob sizes for GitHub. While we don't want GitHub to dictate limits
here, it is still sensible to use this fact for an informed decision
given that it is hosting a huge set of repositories. Furthermore, over
at GitLab we scanned a subset of repositories for their root-level
attribute files. We found that 80% of them have a gitattributes file
smaller than 100kB, 99.99% have one smaller than 1MB, and only a single
repository had one that was almost 3MB in size. So enforcing a limit of
100MB seems to give us ample of headroom.
With this limit in place we can be reasonably sure that there is no easy
way to exploit the gitattributes file via integer overflows anymore.
Furthermore, it protects us against resource exhaustion caused by
allocating the in-memory data structures required to represent the
parsed attributes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different code paths to read gitattributes: once via a
file, and once via the index. These two paths used to behave differently
because when reading attributes from a file, we used fgets(3P) with a
buffer size of 2kB. Consequentially, we silently truncate line lengths
when lines are longer than that and will then parse the remainder of the
line as a new pattern. It goes without saying that this is entirely
unexpected, but it's even worse that the behaviour depends on how the
gitattributes are parsed.
While this is simply wrong, the silent truncation saves us with the
recently discovered vulnerabilities that can cause out-of-bound writes
or reads with unreasonably long lines due to integer overflows. As the
common path is to read gitattributes via the worktree file instead of
via the index, we can assume that any gitattributes file that had lines
longer than that is already broken anyway. So instead of lifting the
limit here, we can double down on it to fix the vulnerabilities.
Introduce an explicit line length limit of 2kB that is shared across all
paths that read attributes and ignore any line that hits this limit
while printing a warning.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading attributes from a file we use fgets(3P) with a buffer size
of 2048 bytes. This means that as soon as a line exceeds the buffer size
we split it up into multiple parts and parse each of them as a separate
pattern line. This is of course not what the user intended, and even
worse the behaviour is inconsistent with how we read attributes from the
index.
Fix this bug by converting the code to use `strbuf_getline()` instead.
This will indeed read in the whole line, which may theoretically lead to
an out-of-memory situation when the gitattributes file is huge. We're
about to reject any gitattributes files larger than 100MB in the next
commit though, which makes this less of a concern.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --edit-description" on an unborh branch misleadingly
said that no such branch exists, which has been corrected.
* rj/branch-edit-desc-unborn:
branch: description for non-existent branch errors
"git multi-pack-index repack/expire" used to repack unreachable
cruft into a new pack, which have been corrected.
cf. <63a1c3d4-eff3-af10-4263-058c88e74594@github.com>
* tb/midx-repack-ignore-cruft-packs:
midx.c: avoid cruft packs with non-zero `repack --batch-size`
midx.c: remove unnecessary loop condition
midx.c: replace `xcalloc()` with `CALLOC_ARRAY()`
midx.c: avoid cruft packs with `repack --batch-size=0`
midx.c: prevent `expire` from removing the cruft pack
Documentation/git-multi-pack-index.txt: clarify expire behavior
Documentation/git-multi-pack-index.txt: fix typo
Code clean-up.
* jk/cleanup-callback-parameters:
attr: drop DEBUG_ATTR code
commit: avoid writing to global in option callback
multi-pack-index: avoid writing to global in option callback
test-submodule: inline resolve_relative_url() function
"GIT_EDITOR=: git branch --edit-description" resulted in failure,
which has been corrected.
* jc/branch-description-unset:
branch: do not fail a no-op --edit-desc
Fix a logic in "mailinfo -b" that miscomputed the length of a
substring, which lead to an out-of-bounds access.
* pw/mailinfo-b-fix:
mailinfo -b: fix an out of bounds access
Force C locale while running tests around httpd to make sure we can
find expected error messages in the log.
* rs/test-httpd-in-C-locale:
t/lib-httpd: pass LANG and LC_ALL to Apache
In read-only repositories, "git merge-tree" tried to come up with a
merge result tree object, which it failed (which is not wrong) and
led to a segfault (which is bad), which has been corrected.
* js/merge-ort-in-read-only-repo:
merge-ort: return early when failing to write a blob
merge-ort: fix segmentation fault in read-only repositories
"git rebase -i" can mistakenly attempt to apply a fixup to a commit
itself, which has been corrected.
* ja/rebase-i-avoid-amending-self:
sequencer: avoid dropping fixup commit that targets self via commit-ish
"git clone" did not like to see the "--bare" and the "--origin"
options used together without a good reason.
* jk/clone-allow-bare-and-o-together:
clone: allow "--bare" with "-o"
"git remote rename" failed to rename a remote without fetch
refspec, which has been corrected.
* jk/remote-rename-without-fetch-refspec:
remote: handle rename of remote without fetch refspec
rebase --preserve-merges no longer exists so there is no point in
carrying this failing test case.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the repository does not yet have commits, some errors describe that
there is no branch:
$ git init -b first
$ git branch --edit-description first
error: No branch named 'first'.
$ git branch --set-upstream-to=upstream
fatal: branch 'first' does not exist
$ git branch -c second
error: refname refs/heads/first not found
fatal: Branch copy failed
That "first" branch is unborn but to say it doesn't exists is confusing.
Options "-c" (copy) and "-m" (rename) show the same error when the
origin branch doesn't exists:
$ git branch -c non-existent-branch second
error: refname refs/heads/non-existent-branch not found
fatal: Branch copy failed
$ git branch -m non-existent-branch second
error: refname refs/heads/non-existent-branch not found
fatal: Branch rename failed
Note that "--edit-description" without an explicit argument is already
considering the _empty repository_ circumstance in its error. Also note
that "-m" on the initial branch it is an allowed operation.
Make the error descriptions for those branch operations with unborn or
non-existent branches, more informative.
This is the result of the change:
$ git init -b first
$ git branch --edit-description first
error: No commit on branch 'first' yet.
$ git branch --set-upstream-to=upstream
fatal: No commit on branch 'first' yet.
$ git branch -c second
fatal: No commit on branch 'first' yet.
$ git branch [-c/-m] non-existent-branch second
fatal: No branch named 'non-existent-branch'.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly cloning over the "file://" protocol in t7527 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The resolve_relative_url() function takes argc and argv parameters; it
then reads up to 3 elements of argv without looking at argc at all. At
first glance, this seems like a bug. But it has only one caller,
cmd__submodule_resolve_relative_url(), which does confirm that argc is
3.
The main reason this is a separate function is that it was moved from
library code in 96a28a9bc6 (submodule--helper: move
"resolve-relative-url-test" to a test-tool, 2022-09-01).
We can make this code simpler and more obviously safe by just inlining
the function in its caller. As a bonus, this silences a
-Wunused-parameter warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5411 starts a web server with no explicit language setting, so it uses
the system default. Ten of its tests expect it to return error messages
containing the prefix "fatal: ", emitted by die(). This prefix can be
localized since a1fd2cf8cd (i18n: mark message helpers prefix for
translation, 2022-06-21), however. As a result these ten tests break
for me on a system with LANG="de_DE.UTF-8" because the web server sends
localized messages with "Schwerwiegend: " instead of "fatal: ".
Fix these tests by passing LANG and LC_ALL to the web server, which are
set to "C" by t/test-lib.sh, to get untranslated messages on both sides.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly cloning over the "file://" protocol in t5537 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t3206 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
As we parse the author-script file, we check for missing or duplicate
lines for GIT_AUTHOR_NAME, etc. But after reading the whole file, our
final error conditional checks "date_i" twice and "name_i" not at all.
This not only leads to us failing to abort, but we may do an
out-of-bounds read on the string_list array.
The bug goes back to 442c36bd08 (am: improve author-script error
reporting, 2018-10-31), though the code was soon after moved to this
spot by bcd33ec25f (add read_author_script() to libgit, 2018-10-31).
It was presumably just a typo in 442c36bd08.
We'll add test coverage for all the error cases here, though only the
GIT_AUTHOR_NAME ones fail (even in a vanilla build they segfault
consistently, but certainly with SANITIZE=address).
Reported-by: Michael V. Scovetta <michael.scovetta@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To remove bracketed strings containing "PATCH" from the subject line
cleanup_subject() scans the subject for the opening bracket using an
offset from the beginning of the line. It then searches for the
closing bracket with strchr(). To calculate the length of the
bracketed string it unfortunately adds rather than subtracts the
offset from the result of strchr(). This leads to an out of bounds
access in memmem() when looking to see if the brackets contain
"PATCH".
We have tests that trigger this bug that were added in ae52d57f0b
(t5100: add some more mailinfo tests, 2017-05-31). The commit message
mentions that they are marked test_expect_failure as they trigger an
assertion in strbuf_splice(). While it is reassuring that
strbuf_splice() detects the problem and dies in retrospect that should
perhaps have warranted a little more investigation. The bug was
introduced by 17635fc900 (mailinfo: -b option keeps [bracketed]
strings that is not a [PATCH] marker, 2009-07-15). I think the reason
it has survived so long is that '-b' is not a popular option and
without it the offset is always zero.
This was found by the address sanitizer while I was cleaning up the
test_todo idea in [1].
[1] https://lore.kernel.org/git/db558292-2783-3270-4824-43757822a389@gmail.com/
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly cloning over the "file://" protocol in t7814 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t5537 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t5516 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t3207 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t1092 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t1092 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t1092 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Explicitly cloning over the "file://" protocol in t1092 in preparation
for merging a security release which will change the default value of
this configuration to be "user".
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When git-shell is run in interactive mode (which must be enabled by
creating $HOME/git-shell-commands), it reads commands from stdin, one
per line, and executes them.
We read the commands with git_read_line_interactively(), which uses a
strbuf under the hood. That means we'll accept an input of arbitrary
size (limited only by how much heap we can allocate). That creates two
problems:
- the rest of the code is not prepared to handle large inputs. The
most serious issue here is that split_cmdline() uses "int" for most
of its types, which can lead to integer overflow and out-of-bounds
array reads and writes. But even with that fixed, we assume that we
can feed the command name to snprintf() (via xstrfmt()), which is
stuck for historical reasons using "int", and causes it to fail (and
even trigger a BUG() call).
- since the point of git-shell is to take input from untrusted or
semi-trusted clients, it's a mild denial-of-service. We'll allocate
as many bytes as the client sends us (actually twice as many, since
we immediately duplicate the buffer).
We can fix both by just limiting the amount of per-command input we're
willing to receive.
We should also fix split_cmdline(), of course, which is an accident
waiting to happen, but that can come on top. Most calls to
split_cmdline(), including the other one in git-shell, are OK because
they are reading from an OS-provided argv, which is limited in practice.
This patch should eliminate the immediate vulnerabilities.
I picked 4MB as an arbitrary limit. It's big enough that nobody should
ever run into it in practice (since the point is to run the commands via
exec, we're subject to OS limits which are typically much lower). But
it's small enough that allocating it isn't that big a deal.
The code is mostly just swapping out fgets() for the strbuf call, but we
have to add a few niceties like flushing and trimming line endings. We
could simplify things further by putting the buffer on the stack, but
4MB is probably a bit much there. Note that we'll _always_ allocate 4MB,
which for normal, non-malicious requests is more than we would before
this patch. But on the other hand, other git programs are happy to use
96MB for a delta cache. And since we'd never touch most of those pages,
on a lazy-allocating OS like Linux they won't even get allocated to
actual RAM.
The ideal would be a version of strbuf_getline() that accepted a maximum
value. But for a minimal vulnerability fix, let's keep things localized
and simple. We can always refactor further on top.
The included test fails in an obvious way with ASan or UBSan (which
notice the integer overflow and out-of-bounds reads). Without them, it
fails in a less obvious way: we may segfault, or we may try to xstrfmt()
a long string, leading to a BUG(). Either way, it fails reliably before
this patch, and passes with it. Note that we don't need an EXPENSIVE
prereq on it. It does take 10-15s to fail before this patch, but with
the new limit, we fail almost immediately (and the perl process
generating 2GB of data exits via SIGPIPE).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We have no tests of even basic functionality of git-shell. Let's add a
couple of obvious ones. This will serve as a framework for adding tests
for new things we fix, as well as making sure we don't screw anything up
too badly while doing so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that interact with submodules a handful of times use
`test_config_global`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead. Test scripts that rely on
submodules throughout use a `git config --global` during a setup test
towards the beginning of the script.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for the default value of `protocol.file.allow` to change to
"user", ensure tests that rely on local submodules can initialize them
over the file protocol.
Tests that only need to interact with submodules in a limited capacity
have individual Git commands annotated with the appropriate
configuration via `-c`. Tests that interact with submodules a handful of
times use `test_config_global` instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
To prepare for changing the default value of `protocol.file.allow` to
"user", update the `prolog()` function in lib-submodule-update to allow
submodules to be cloned over the file protocol.
This is used by a handful of submodule-related test scripts, which
themselves will have to tweak the value of `protocol.file.allow` in
certain locations. Those will be done in subsequent commits.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When cloning a repository with `--local`, Git relies on either making a
hardlink or copy to every file in the "objects" directory of the source
repository. This is done through the callpath `cmd_clone()` ->
`clone_local()` -> `copy_or_link_directory()`.
The way this optimization works is by enumerating every file and
directory recursively in the source repository's `$GIT_DIR/objects`
directory, and then either making a copy or hardlink of each file. The
only exception to this rule is when copying the "alternates" file, in
which case paths are rewritten to be absolute before writing a new
"alternates" file in the destination repo.
One quirk of this implementation is that it dereferences symlinks when
cloning. This behavior was most recently modified in 36596fd2df (clone:
better handle symlinked files at .git/objects/, 2019-07-10), which
attempted to support `--local` clones of repositories with symlinks in
their objects directory in a platform-independent way.
Unfortunately, this behavior of dereferencing symlinks (that is,
creating a hardlink or copy of the source's link target in the
destination repository) can be used as a component in attacking a
victim by inadvertently exposing the contents of file stored outside of
the repository.
Take, for example, a repository that stores a Dockerfile and is used to
build Docker images. When building an image, Docker copies the directory
contents into the VM, and then instructs the VM to execute the
Dockerfile at the root of the copied directory. This protects against
directory traversal attacks by copying symbolic links as-is without
dereferencing them.
That is, if a user has a symlink pointing at their private key material
(where the symlink is present in the same directory as the Dockerfile,
but the key itself is present outside of that directory), the key is
unreadable to a Docker image, since the link will appear broken from the
container's point of view.
This behavior enables an attack whereby a victim is convinced to clone a
repository containing an embedded submodule (with a URL like
"file:///proc/self/cwd/path/to/submodule") which has a symlink pointing
at a path containing sensitive information on the victim's machine. If a
user is tricked into doing this, the contents at the destination of
those symbolic links are exposed to the Docker image at runtime.
One approach to preventing this behavior is to recreate symlinks in the
destination repository. But this is problematic, since symlinking the
objects directory are not well-supported. (One potential problem is that
when sharing, e.g. a "pack" directory via symlinks, different writers
performing garbage collection may consider different sets of objects to
be reachable, enabling a situation whereby garbage collecting one
repository may remove reachable objects in another repository).
Instead, prohibit the local clone optimization when any symlinks are
present in the `$GIT_DIR/objects` directory of the source repository.
Users may clone the repository again by prepending the "file://" scheme
to their clone URL, or by adding the `--no-local` option to their `git
clone` invocation.
The directory iterator used by `copy_or_link_directory()` must no longer
dereference symlinks (i.e., it *must* call `lstat()` instead of `stat()`
in order to discover whether or not there are symlinks present). This has
no bearing on the overall behavior, since we will immediately `die()` on
encounter a symlink.
Note that t5604.33 suggests that we do support local clones with
symbolic links in the source repository's objects directory, but this
was likely unintentional, or at least did not take into consideration
the problem with sharing parts of the objects directory with symbolic
links at the time. Update this test to reflect which options are and
aren't supported.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Imagine running "git branch --edit-description" while on a branch
without the branch description, and then exit the editor after
emptying the edit buffer, which is the way to tell the command that
you changed your mind and you do not want the description after all.
The command should just happily oblige, adding no branch description
for the current branch, and exit successfully. But it fails to do
so:
$ git init -b main
$ git commit --allow-empty -m commit
$ GIT_EDITOR=: git branch --edit-description
fatal: could not unset 'branch.main.description'
The end result is OK in that the configuration variable does not
exist in the resulting repository, but we should do better. If we
know we didn't have a description, and if we are asked not to have a
description by the editor, we can just return doing nothing.
This of course introduces TOCTOU. If you add a branch description
to the same branch from another window, while you had the editor
open to edit the description, and then exit the editor without
writing anything there, we'd end up not removing the description you
added in the other window. But you are fooling yourself in your own
repository at that point, and if it hurts, you'd be better off not
doing so ;-).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 131b94a10a (test-lib.sh: Use GLIBC_TUNABLES instead of
MALLOC_CHECK_ on glibc >= 2.34, 2022-03-04) compiling with
SANITIZE=leak has missed reporting some leaks. The old MALLOC_CHECK
method used before glibc 2.34 seems to have been (mostly?) compatible
with it, but after 131b94a10a e.g. running:
TEST_NO_MALLOC_CHECK=1 make SANITIZE=leak test T=t6437-submodule-merge.sh
Would report a leak in builtin/commit.c, but this would not:
TEST_NO_MALLOC_CHECK= make SANITIZE=leak test T=t6437-submodule-merge.sh
Since the interaction is clearly breaking the SANITIZE=leak mode,
let's mark them as explicitly incompatible.
A related regression for SANITIZE=address was fixed in
067109a5e7 (tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK,
2022-04-09).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the blob/tree objects cannot be written, we really need the merge
operations to fail, and not to continue (and then try to access the tree
object which is however still set to `NULL`).
Let's stop ignoring the return value of `write_object_file()` and
`write_tree()` and set `clean = -1` in the error case.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The trace2 region around the call to lazy_bitmap_for_commit() in
bitmap_for_commit() was added in 28cd730680 (pack-bitmap: prepare to
read lookup table extension, 2022-08-14). While adding trace2 regions is
typically helpful for tracking performance, this method is called
possibly thousands of times as a commit walk explores commit history
looking for a matching bitmap. When trace2 output is enabled, this
region is emitted many times and performance is throttled by that
output.
For now, remove these regions entirely.
This is a critical path, and it would be valuable to measure that the
time spent in bitmap_for_commit() does not increase when using the
commit lookup table. The best way to do that would be to use a mechanism
that sums the time spent in a region and reports a single value at the
end of the process. This technique was introduced but not merged by [1]
so maybe this example presents some justification to revisit that
approach.
[1] https://lore.kernel.org/git/pull.1099.v2.git.1640720202.gitgitgadget@gmail.com/
To help with the 'git blame' output in this region, add a comment that
warns against adding a trace2 region. Delete a test from t5310 that used
that trace output to check that this lookup optimization was activated.
To create this kind of test again in the future, the stopwatch traces
mentioned earlier could be used as a signal that we activated this code
path.
Helpedy-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 68d5d03bc4 (rebase: teach --autosquash to match on sha1 in
addition to message, 2010-11-04) taught autosquash to recognize
subjects like "fixup! 7a235b" where 7a235b is an OID-prefix. It
actually did more than advertised: 7a235b can be an arbitrary
commit-ish (as long as it's not trailed by spaces).
Accidental(?) use of this secret feature revealed a bug where we
would silently drop a fixup commit. The bug can also be triggered
when using an OID-prefix but that's unlikely in practice.
Let the commit with subject "fixup! main" be the tip of the "main"
branch. When computing the fixup target for this commit, we find
the commit itself. This is wrong because, by definition, a fixup
target must be an earlier commit in the todo list. We wrongly find
the current commit because we added it to the todo list prematurely.
Avoid these fixup-cycles by only adding the current commit to the
todo list after we have finished looking for the fixup target.
Reported-by: Erik Cervin Edin <erik@cervined.in>
Signed-off-by: Johannes Altmanninger <aclopte@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We return an error when trying to rename a remote that has no fetch
refspec:
$ git config --unset-all remote.origin.fetch
$ git remote rename origin foo
fatal: could not unset 'remote.foo.fetch'
To make things even more confusing, we actually _do_ complete the config
modification, via git_config_rename_section(). After that we try to
rewrite the fetch refspec (to say refs/remotes/foo instead of origin).
But our call to git_config_set_multivar() to remove the existing entries
fails, since there aren't any, and it calls die().
We could fix this by using the "gently" form of the config call, and
checking the error code. But there is an even simpler fix: if we know
that there are no refspecs to rewrite, then we can skip that part
entirely.
Reported-by: John A. Leuenhagen <john@zlima12.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly forbid the combination of "--bare" with "-o", but there
doesn't seem to be any good reason to do so. The original logic came as
part of e6489a1bdf (clone: do not accept more than one -o option.,
2006-01-22), but that commit does not give any reason.
Furthermore, the equivalent combination via config is allowed:
git -c clone.defaultRemoteName=foo clone ...
and works as expected. It may be that this combination was considered
useless, because a bare clone does not set remote.origin.fetch (and
hence there is no refs/remotes/origin hierarchy). But it does set
remote.origin.url, and that name is visible to the user via "git fetch
origin", etc.
Let's allow the options to be used together, and switch the "forbid"
test in t5606 to check that we use the requested name. That test came
much later in 349cff76de (clone: add tests for --template and some
disallowed option pairs, 2020-09-29), and does not offer any logic
beyond "let's test what the code currently does".
Reported-by: John A. Leuenhagen <john@zlima12.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make clean" stopped cleaning the test results directory as a side
effect of a topic that has nothing to do with "make clean", which
has been corrected.
* sg/clean-test-results:
t/Makefile: remove 'test-results' on 'make clean'
The 't/test-results' directory and its contents are by-products of the
test process, so 'make clean' should remove them, but, alas, this has
been broken since fee65b194d (t/Makefile: don't remove test-results in
"clean-except-prove-cache", 2022-07-28).
The 'clean' target in 't/Makefile' was not directly responsible for
removing the 'test-results' directory, but relied on its dependency
'clean-except-prove-cache' to do that [1]. ee65b194d broke this,
because it only removed the 'rm -r test-results' command from the
'clean-except-prove-cache' target instead of moving it to the 'clean'
target, resulting in stray 't/test-results' directories.
Add that missing cleanup command to 't/Makefile', and to all
sub-Makefiles touched by that commit as well.
[1] 60f26f6348 (t/Makefile: retain cache t/.prove across prove runs,
2012-05-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply similar treatment with respect to cruft packs as in a few commits
ago to `repack` with a non-zero `--batch-size`.
Since the case of a non-zero `--batch-size` is handled separately (in
`fill_included_packs_batch()` instead of `fill_included_packs_all()`), a
separate fix must be applied for this case.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `repack` sub-command of the `git multi-pack-index` builtin creates a
new pack aggregating smaller packs contained in the MIDX up to some
given `--batch-size`.
When `--batch-size=0`, this instructs the MIDX builtin to repack
everything contained in the MIDX into a single pack.
In similar spirit as a previous commit, it is undesirable to repack the
contents of a cruft pack in this step. Teach `repack` to ignore any
cruft pack(s) when `--batch-size=0` for the same reason(s).
(The case of a non-zero `--batch-size` will be handled in a subsequent
commit).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `expire` sub-command unlinks any packs that are (a) contained in the
MIDX, but (b) have no objects referenced by the MIDX.
This sub-command ignores `.keep` packs, which remain on-disk even if
they have no objects referenced by the MIDX. Cruft packs, however,
aren't given the same treatment: if none of the objects contained in the
cruft pack are selected from the cruft pack by the MIDX, then the cruft
pack is eligible to be expired.
This is less than desireable, since the cruft pack has important
metadata about the individual object mtimes, which is useful to
determine how quickly an object should age out of the repository when
pruning.
Ordinarily, we wouldn't expect the contents of a cruft pack to
duplicated across non-cruft packs (and we'd expect to see the MIDX
select all cruft objects from other sources even less often). But
nonetheless, it is still possible to trick the `expire` sub-command into
removing the `.mtimes` file in this circumstance.
Teach the `expire` sub-command to ignore cruft packs in the same manner
as it does `.keep` packs, in order to keep their metadata around, even
when they are unreferenced by the MIDX.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hoist the remainder of "scalar" out of contrib/ to the main part of
the codebase.
* vd/scalar-to-main:
Documentation/technical: include Scalar technical doc
t/perf: add 'GIT_PERF_USE_SCALAR' run option
t/perf: add Scalar performance tests
scalar-clone: add test coverage
scalar: add to 'git help -a' command list
scalar: implement the `help` subcommand
git help: special-case `scalar`
scalar: include in standard Git build & installation
scalar: fix command documentation section header
Revamp chainlint script for our tests.
* es/chainlint:
chainlint: colorize problem annotations and test delimiters
t: retire unused chainlint.sed
t/Makefile: teach `make test` and `make prove` to run chainlint.pl
test-lib: replace chainlint.sed with chainlint.pl
test-lib: retire "lint harder" optimization hack
t/chainlint: add more chainlint.pl self-tests
chainlint.pl: allow `|| echo` to signal failure upstream of a pipe
chainlint.pl: complain about loops lacking explicit failure handling
chainlint.pl: don't flag broken &&-chain if failure indicated explicitly
chainlint.pl: don't flag broken &&-chain if `$?` handled explicitly
chainlint.pl: don't require `&` background command to end with `&&`
t/Makefile: apply chainlint.pl to existing self-tests
chainlint.pl: don't require `return|exit|continue` to end with `&&`
chainlint.pl: validate test scripts in parallel
chainlint.pl: add parser to identify test definitions
chainlint.pl: add parser to validate tests
chainlint.pl: add POSIX shell parser
chainlint.pl: add POSIX shell lexical analyzer
t: add skeleton chainlint.pl
"git mv A B" in a sparsely populated working tree can be asked to
move a path from a directory that is "in cone" to another directory
that is "out of cone". Handling of such a case has been improved.
* sy/mv-out-of-cone:
builtin/mv.c: fix possible segfault in add_slash()
mv: check overwrite for in-to-out move
advice.h: add advise_on_moving_dirty_path()
mv: cleanup empty WORKING_DIRECTORY
mv: from in-cone to out-of-cone
mv: remove BOTH from enum update_mode
mv: check if <destination> is a SKIP_WORKTREE_DIR
mv: free the with_slash in check_dir_in_index()
mv: rename check_dir_in_index() to empty_dir_has_sparse_contents()
t7002: add tests for moving from in-cone to out-of-cone
Refactor usage of the 'd_type' property of 'struct dirent' in 'diagnose.c'
to instead utilize the compatibility macro 'DTYPE()'. On systems where
'd_type' is not present in 'struct dirent', this macro will always return
'DT_UNKNOWN'. In that case, instead fall back on using the 'stat.st_mode' to
determine whether the dirent points to a dir, file, or link.
Additionally, add a test to 't0092-diagnose.sh' to verify that files (e.g.,
loose objects) are counted properly.
Note that the new function 'get_dtype()' is based on 'resolve_dtype()' in
'dir.c' (which itself was refactored from a prior 'get_dtype()' in
ad6f2157f9 (dir: restructure in a way to avoid passing around a struct
dirent, 2020-01-16)), but differs in that it is meant for use on arbitrary
files, such as those inside the '.git' dir. Because of this, it does not
search the index for a matching entry to derive the 'd_type'.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" over protocol v2 sent an incorrect ref prefix request
to the server and made "git pull" with configured fetch refspec
that does not cover the remote branch to merge with fail, which has
been corrected.
* jk/proto-v2-ref-prefix-fix:
fetch: add branch.*.merge to default ref-prefix extension
fetch: stop checking for NULL transport->remote in do_fetch()
Fix a few "git log --remerge-diff" bugs.
* en/remerge-diff-fixes:
diff: fix filtering of merge commits under --remerge-diff
diff: fix filtering of additional headers under --remerge-diff
diff: have submodule_format logic avoid additional diff headers
On Cygwin, when failing to spawn a process using start_command, Git
outputs the same error as on Linux systems, rather than using the
GIT_WINDOWS_NATIVE-specific error output. The WINDOWS test prerequisite
is set in both Cygwin and native Windows environments, which means it's
not appropriate to use to anticipate the error output from
start_command. Instead, use the MINGW test prerequisite, which is only
set for Git in native Windows environments, and not for Cygwin.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plugging leaks in submodule--helper.
* ab/submodule-helper-leakfix:
submodule--helper: fix a configure_added_submodule() leak
submodule--helper: free rest of "displaypath" in "struct update_data"
submodule--helper: free some "displaypath" in "struct update_data"
submodule--helper: fix a memory leak in print_status()
submodule--helper: fix a leak in module_add()
submodule--helper: fix obscure leak in module_add()
submodule--helper: fix "reference" leak
submodule--helper: fix a memory leak in get_default_remote_submodule()
submodule--helper: fix a leak with repo_clear()
submodule--helper: fix "sm_path" and other "module_cb_list" leaks
submodule--helper: fix "errmsg_str" memory leak
submodule--helper: add and use *_release() functions
submodule--helper: don't leak {run,capture}_command() cp.dir argument
submodule--helper: "struct pathspec" memory leak in module_update()
submodule--helper: fix most "struct pathspec" memory leaks
submodule--helper: fix trivial get_default_remote_submodule() leak
submodule--helper: fix a leak in "clone_submodule"
Undoes 'jk/unused-annotation' topic and redoes it to work around
Coccinelle rules misfiring false positives in unrelated codepaths.
* ab/unused-annotation:
git-compat-util.h: use "deprecated" for UNUSED variables
git-compat-util.h: use "UNUSED", not "UNUSED(var)"
Annotate function parameters that are not used (but cannot be
removed for structural reasons), to prepare us to later compile
with -Wunused warning turned on.
* jk/unused-annotation:
is_path_owned_by_current_uid(): mark "report" parameter as unused
run-command: mark unused async callback parameters
mark unused read_tree_recursive() callback parameters
hashmap: mark unused callback parameters
config: mark unused callback parameters
streaming: mark unused virtual method parameters
transport: mark bundle transport_options as unused
refs: mark unused virtual method parameters
refs: mark unused reflog callback parameters
refs: mark unused each_ref_fn parameters
git-compat-util: add UNUSED macro
The auto-stashed local changes created by "git merge --autostash"
was mixed into a conflicted state left in the working tree, which
has been corrected.
* en/merge-unstash-only-on-clean-merge:
merge: only apply autostash when appropriate
Fix deadlocks between main Git process and subprocess spawned via
the pipe_command() API, that can kill "git add -p" that was
reimplemented in C recently.
* jk/pipe-command-nonblock:
pipe_command(): mark stdin descriptor as non-blocking
pipe_command(): handle ENOSPC when writing to a pipe
pipe_command(): avoid xwrite() for writing to pipe
git-compat-util: make MAX_IO_SIZE define globally available
nonblock: support Windows
compat: add function to enable nonblocking pipes
An earlier optimization discarded a tree-object buffer that is
still in use, which has been corrected.
* jk/is-promisor-object-keep-tree-in-use:
is_promisor_object(): fix use-after-free of tree buffer
The parser in the script interface to parse-options in "git
rev-parse" has been updated to diagnose a bogus input correctly.
* ow/rev-parse-parseopt-fix:
rev-parse --parseopt: detect missing opt-spec
More fixes to "add -p"
* js/builtin-add-p-portability-fix:
t6132(NO_PERL): do not run the scripted `add -p`
t3701: test the built-in `add -i` regardless of NO_PERL
add -p: avoid ambiguous signed/unsigned comparison
The codepath for the OPT_SUBCOMMAND facility has been cleaned up.
* sg/parse-options-subcommand:
notes, remote: show unknown subcommands between `'
notes: simplify default operation mode arguments check
test-parse-options.c: fix style of comparison with zero
test-parse-options.c: don't use for loop initial declaration
t0040-parse-options: remove leftover debugging
"git rev-list --verify-objects" ought to inspect the contents of
objects and notice corrupted ones, but it didn't when the commit
graph is in use, which has been corrected.
* jk/rev-list-verify-objects-fix:
rev-list: disable commit graph with --verify-objects
lookup_commit_in_graph(): use prepare_commit_graph() to check for graph
The server side that responds to "git fetch" and "git clone"
request has been optimized by allowing it to send objects in its
object store without recomputing and validating the object names.
* jk/upload-pack-skip-hash-check:
t1060: check partial clone of misnamed blob
parse_object(): check commit-graph when skip_hash set
upload-pack: skip parse-object re-hashing of "want" objects
parse_object(): allow skipping hash check
When `chainlint.pl` detects problems in a test definition, it emits the
test definition with "?!FOO?!" annotations highlighting the problems it
discovered. For instance, given this problematic test:
test_expect_success 'discombobulate frobnitz' '
git frob babble &&
(echo balderdash; echo gnabgib) >expect &&
for i in three two one
do
git nitfol $i
done >actual
test_cmp expect actual
'
chainlint.pl will output:
# chainlint: t1234-confusing.sh
# chainlint: discombobulate frobnitz
git frob babble &&
(echo balderdash ; ?!AMP?! echo gnabgib) >expect &&
for i in three two one
do
git nitfol $i ?!LOOP?!
done >actual ?!AMP?!
test_cmp expect actual
in which it may be difficult to spot the "?!FOO?!" annotations. The
problem is compounded when multiple tests, possibly in multiple
scripts, fail "linting", in which case it may be difficult to spot the
"# chainlint:" lines which delimit one problematic test from another.
To ameliorate this potential problem, colorize the "?!FOO?!" annotations
in order to quickly draw the test author's attention to the problem
spots, and colorize the "# chainlint:" lines to help the author identify
the name of each script and each problematic test.
Colorization is disabled automatically if output is not directed to a
terminal or if NO_COLOR environment variable is set. The implementation
is specific to Unix (it employs `tput` if available) but works equally
well in the Git for Windows development environment which emulates Unix
sufficiently.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Segfault fix-up to an earlier fix to the topic to teach "git reset"
and "git checkout" work better in a sparse checkout.
* vd/sparse-reset-checkout-fixes:
unpack-trees: fix sparse directory recursion check
"git format-patch --from=<ident>" can be told to add an in-body
"From:" line even for commits that are authored by the given
<ident> with "--force-in-body-from"option.
* jc/format-patch-force-in-body-from:
format-patch: learn format.forceInBodyFrom configuration variable
format-patch: allow forcing the use of in-body From: header
pretty: separate out the logic to decide the use of in-body from
Those who use diff-so-fancy as the diff-filter noticed a regression
or two in the code that parses the diff output in the built-in
version of "add -p", which has been corrected.
* js/add-p-diff-parsing-fix:
add -p: ignore dirty submodules
add -p: gracefully handle unparseable hunk headers in colored diffs
add -p: detect more mismatches between plain vs colored diffs
