In a future patch, we plan on making the test_must_fail()-family of
functions accept only git commands. Even though force_color() wraps an
invocation of `env git`, test_must_fail() will not be able to figure
this out since it will assume that force_color() is just some random
function which is disallowed.
Instead of using `env` in force_color() (which does not support shell
functions), export the environment variables in a subshell. Write the
invocation as `force_color test_must_fail git ...` since shell functions
are now supported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original patch selection code was written for `git add -p`, and the
fundamental unit on which it works is a hunk.
We hacked around that to handle deletions back in 24ab81ae4d
(add-interactive: handle deletion of empty files, 2009-10-27). But `git
add -p` would never see a new file, since we only consider the set of
tracked files in the index.
However, since the same machinery was used for `git checkout -p` &
friends, we can see new files.
Handle this case specifically, adding a new prompt for it that is
modeled after the `deleted file` case.
This also fixes the problem where added _empty_ files could not be
staged via `git checkout -p`.
Reported-by: Merlin Büge <toni@bluenox07.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing spaces before '&&' and switch tabs around '&&' to spaces.
Also fix the space after redirection operator in t3701 while we're here.
These issues were found using `git grep '[^ ]&&$'` and
`git grep -P '&&\t' t/`.
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff-* plumbing family of subcommands now pay attention to the
diff.wsErrorHighlight configuration, which has been ignored before;
this allows "git add -p" to also show the whitespace problems to
the end user.
* jk/diff-honor-wserrhighlight-in-plumbing:
diff: move diff.wsErrorHighlight to "basic" config
The final leg of rewriting "add -i/-p" in C.
* js/add-p-leftover-bits:
ci: include the built-in `git add -i` in the `linux-gcc` job
built-in add -p: handle Escape sequences more efficiently
built-in add -p: handle Escape sequences in interactive.singlekey mode
built-in add -p: respect the `interactive.singlekey` config setting
terminal: add a new function to read a single keystroke
terminal: accommodate Git for Windows' default terminal
terminal: make the code of disable_echo() reusable
built-in add -p: handle diff.algorithm
built-in add -p: support interactive.diffFilter
t3701: adjust difffilter test
We parse diff.wsErrorHighlight in git_diff_ui_config(), meaning that it
doesn't take effect for plumbing commands, only for porcelains like
git-diff itself. This is mildly annoying as it means scripts like
add--interactive, which produce a user-visible diff with color, don't
respect the option.
We could teach that script to parse the config and pass it along as
--ws-error-highlight to the diff plumbing. But there's a simpler
solution.
It should be reasonably safe for plumbing to respect this option, as it
only kicks in when color is otherwise enabled. And anybody parsing
colorized output must already deal with the fact that color.diff.* may
change the exact output they see; those options have been part of
git_diff_basic_config() since its inception in 9a1805a872 (add a "basic"
diff config callback, 2008-01-04).
So we can just move it to the "basic" config, which fixes
add--interactive, along with any other script in the same boat, with a
very low risk of hurting any plumbing users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor bugfixes to "git add -i" that has recently been rewritten in C.
* js/builtin-add-i-cmds:
built-in add -i: accept open-ended ranges again
built-in add -i: do not try to `patch`/`diff` an empty list of files
The interactive `add` command allows selecting multiple files for some
of its sub-commands, via unique prefixes, indices or index ranges.
When re-implementing `git add -i` in C, we even added a code comment
talking about ranges with a missing end index, such as `2-`, but the
code did not actually accept those, as pointed out in
https://github.com/git-for-windows/git/issues/2466#issuecomment-574142760.
Let's fix this, and add a test case to verify that this stays fixed
forever.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 42f7d45428 (add--interactive: detect bogus diffFilter output,
2018-03-03), we added a test case that verifies that the diffFilter
feature complains appropriately when the output is too short.
In preparation for the upcoming change where the built-in `add -p` is
taught to respect that setting, let's adjust that test a little. The
problem is that `echo too-short` is configured as diffFilter, and it
does not read the `stdin`. When calling it through `pipe_command()`, it
is therefore possible that we try to feed the `diff` to it while it is
no longer listening, and we receive a `SIGPIPE`.
The Perl code apparently handles this in a way similar to an
end-of-file, but taking a step back, we realize that a diffFilter that
does not even _look_ at its standard input is very unrealistic. The
entire point of this feature is to transform the diff, not to ignore it
altogether.
So let's modify the test case to reflect that insight: instead of
printing some bogus text, let's use a diffFilter that deletes the first
line of the diff instead.
This still tests for the same thing, but it does not confuse the
built-in `add -p` with that `SIGPIPE`.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements the hunk searching feature in the C version of
`git add -p`.
A test is added to verify that this behavior matches the one of the Perl
version of `git add -p`.
Note that this involves a change of behavior: the Perl version uses (of
course) the Perl flavor of regular expressions, while this patch uses
the regcomp()/regexec(), i.e. POSIX extended regular expressions. In
practice, this behavior change is unlikely to matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, it is now possible to see a summary of the available
hunks and to navigate between them (by number).
A test is added to verify that this behavior matches the one of the Perl
version of `git add -p`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If this developer's workflow is any indication, then this is *the* most
useful feature of Git's interactive `add `command.
Note: once again, this is not a verbatim conversion from the Perl code
to C: the `hunk_splittable()` function, for example, essentially did all
the work of splitting the hunk, just to find out whether more than one
hunk would have been the result (and then tossed that result into the
trash). In C we instead count the number of resulting hunks (without
actually doing the work of splitting, but just counting the transitions
from non-context lines to context lines), and store that information
with the hunk, and we do that *while* parsing the diff in the first
place.
Another deviation: the built-in `git add -p` was designed with a single
strbuf holding the diff (and another one holding the colored diff, if
that one was asked for) in mind, and hunks essentially store just the
start and end offsets pointing into that strbuf. As a consequence, when
we split hunks, we now use a special mode where the hunk header is
generated dynamically, and only the rest of the hunk is stored using
such start/end offsets. This way, we also avoid the frequent
formatting/re-parsing of the hunk header of the Perl version.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first thing `git add -p` does is to generate a diff. If this diff
cannot be generated, `git add -p` should not continue as if nothing
happened, but instead fail.
What we *actually* do here is much broader: we now verify for *every*
`run_cmd_pipe()` call that the spawned process actually succeeded.
Note that we have to change two callers in this patch, as we need to
store the spawned process' output in a local variable, which means that
the callers can no longer decide whether to interpret the `return <$fh>`
in array or in scalar context.
This bug was noticed while writing a test case for the diff.algorithm
feature, and we let that test case double as a regression test for this
fixed bug, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch, there is actually no test in Git's test suite that
covers the diff.algorithm feature. Let's add one.
We do this by passing a bogus value and then expecting `git diff-files`
to produce the appropriate error message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for re-implementing `git add -p` in pure C (where we will
purposefully keep the implementation of `git add -p` separate from the
implementation of `git add -i`), let's verify that the user is told the
same things as in the Perl version when the diff file is either empty or
contains only entries about binary files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git add -p` command offers different prompts for regular diff hunks
vs mode change pseudo hunks vs diffs deleting files.
Let's cover this in the regresion test suite, in preparation for
re-implementing `git add -p` in C.
For the mode change prompt, we use a trick that lets this test case pass
even on systems without executable bit, i.e. where `core.filemode =
false` (such as Windows): we first add the file to the index with `git
add --chmod=+x`, and then call `git add -p` with `core.filemode` forced
to `true`. The file on disk has no executable bit set, therefore we will
see a mode change.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The TTY prerequisite is a rather heavy one: it not only requires Perl to
work, but also the IO/Pty.pm module (with native support, and it
requires pseudo terminals, too).
In particular, test cases marked with the TTY prerequisite would be
skipped in Git for Windows' SDK.
In the case of `git add -p`, we do not actually need that big a hammer,
as we do not want to test any functionality that requires a pseudo
terminal; all we want is for the interactive add command to use color,
even when being called from within the test suite.
And we found exactly such a trick earlier already: when we added a test
case to verify that the main loop of `git add -i` is colored
appropriately. Let's use that trick instead of the TTY prerequisite.
While at it, we avoid the pipes, as we do not want a SIGPIPE to break
the regression test cases (which will be much more likely when we do not
run everything through Perl because that is inherently slower).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this developer's workflows, it often happens that a hunk needs to be
edited in a way that adds lines, and sometimes even reduces the number
of context lines.
Let's add a regression test for this.
Note that just like the preceding test case, the new test case is *not*
handled gracefully by the current `git add -p`. It will be handled
correctly by the upcoming built-in `git add -p`, though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This imitates the code to show the help text from the Perl script
`git-add--interactive.perl` in the built-in version.
To make sure that it renders exactly like the Perl version of `git add
-i`, we also add a test case for that to `t3701-add-interactive.sh`.
Signed-off-by: Slavica Đukić <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Report the current hunk count and total number of hunks for the
current file in the prompt. Also adjust the expected output in
some tests to match.
Signed-off-by: Kunal Tyagi <tyagi.kunal@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -p" needs to selectively apply a patch in reverse,
which did not work well.
* pw/add-p-recount:
add -p: fix checkout -p with pathological context
Commit fecc6f3a68 ("add -p: adjust offsets of subsequent hunks when one is
skipped", 2018-03-01) fixed adding hunks in the correct place when a
previous hunk has been skipped. However it did not address patches that
are applied in reverse. In that case we need to adjust the pre-image
offset so that when apply reverses the patch the post-image offset is
adjusted correctly. We subtract rather than add the delta as the patch
is reversed (the easiest way to think about it is to consider a hunk of
deletions that is skipped - in that case we want to reduce offset so we
need to subtract).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'add -p does not expand argument lists' in
't3701-add-interactive.sh', added in 7288e12cce (add--interactive: do
not expand pathspecs with ls-files, 2017-03-14), checks the GIT_TRACE
of 'git add -p' to ensure that the name of a tracked file wasn't
passed around as argument to any of the commands executed as a result
of undesired pathspec expansion. This check is done with 'grep' using
the filename on its own as the pattern, which is too loose a pattern,
and would match any occurrences of the filename in the trace output,
not just those as command arguments. E.g. if a developer were to
litter the index handling code with trace_printf()s printing, among
other things, the name of the just processed cache entry, then that
pattern would mistakenly match these as well, and would fail the test.
Tighten this 'grep' pattern to only match trace lines that show the
executed commands.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests employ a noisy subshell (with missing &&-chain) to feed
input into Git commands or files:
(echo a; echo b; echo c) | git some-command ...
Simplify by taking advantage of test_write_lines():
test_write_lines a b c | git some-command ...
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When user edits the patch in "git add -p" and the user's editor is
set to strip trailing whitespaces indiscriminately, an empty line
that is unchanged in the patch would become completely empty
(instead of a line with a sole SP on it). The code introduced in
Git 2.17 timeframe failed to parse such a patch, but now it learned
to notice the situation and cope with it.
* pw/add-p-recount:
add -p: fix counting empty context lines in edited patches
recount_edited_hunk() introduced in commit 2b8ea7f3c7 ("add -p:
calculate offset delta for edited patches", 2018-03-05) required all
context lines to start with a space, empty lines are not counted. This
was intended to avoid any recounting problems if the user had
introduced empty lines at the end when editing the patch. However this
introduced a regression into 'git add -p' as it seems it is common for
editors to strip the trailing whitespace from empty context lines when
patches are edited thereby introducing empty lines that should be
counted. 'git apply' knows how to deal with such empty lines and POSIX
states that whether or not there is an space on an empty context line
is implementation defined [1].
Fix the regression by counting lines that consist solely of a newline
as well as lines starting with a space as context lines and add a test
to prevent future regressions.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/diff.html
Reported-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Reported-by: Oliver Joseph Ash <oliverjash@gmail.com>
Reported-by: Jeff Felchner <jfelchner1@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "interactive.diffFilter" used by "git add -i" must retain
one-to-one correspondence between its input and output, but it was
not enforced and caused end-user confusion. We now at least make
sure the filtered result has the same number of lines as its input
to detect a broken filter.
* jk/add-i-diff-filter:
add--interactive: detect bogus diffFilter output
t3701: add a test for interactive.diffFilter
"git add -p" has been lazy in coalescing split patches before
passing the result to underlying "git apply", leading to corner
case bugs; the logic to prepare the patch to be applied after hunk
selections has been tightened.
* pw/add-p-recount:
add -p: don't rely on apply's '--recount' option
add -p: fix counting when splitting and coalescing
add -p: calculate offset delta for edited patches
add -p: adjust offsets of subsequent hunks when one is skipped
t3701: add failing test for pathological context lines
t3701: don't hard code sha1 hash values
t3701: use test_write_lines and write_script
t3701: indent here documents
add -i: add function to format hunk header
It's important that the diff-filter only filter the
individual lines, and that there remain a one-to-one mapping
between the input and output lines. Otherwise, things like
hunk-splitting will behave quite unexpectedly (e.g., you
think you are splitting at one point, but it has a different
effect in the text patch we apply).
We can't detect all problematic cases, but we can at least
catch the obvious case where we don't even have the correct
number of lines.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feature was added in 01143847db (add--interactive:
allow custom diff highlighting programs, 2016-02-27) but
never tested. Let's add a basic test.
Note that we only apply the filter when color is enabled,
so we have to use test_terminal. This is an open limitation
explicitly mentioned in the original commit. So take this
commit as testing the status quo, and not making a statement
on whether we'd want to enhance that in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file has no trailing new line at the end diff records this by
appending "\ No newline at end of file" below the last line of the
file. This line should not be counted in the hunk header. Fix the
splitting and coalescing code to count files without a trailing new line
properly and change one of the tests to test splitting without a
trailing new line.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recount the number of preimage and postimage lines in a hunk after it
has been edited so any change in the number of insertions or deletions
can be used to adjust the offsets of subsequent hunks. If an edited
hunk is subsequently split then the offset correction will be lost. It
would be possible to fix this if it is a problem, however the code
here is still an improvement on the status quo for the common case
where an edited hunk is applied without being split.
This is also a necessary step to removing '--recount' and
'--allow-overlap' from the invocation of 'git apply'. Before
'--recount' can be removed the splitting and coalescing counting needs
to be fixed to handle a missing newline at the end of a file. In order
to remove '--allow-overlap' there needs to be i) some way of verifying
the offset data in the edited hunk (probably by correlating the
preimage (or postimage if the patch is going to be applied in reverse)
lines of the edited and unedited versions to see if they are offset or
if any leading/trailing context lines have been removed) and ii) a way of
dealing with edited hunks that change context lines that are shared
with neighbouring hunks.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 8cbd431082 ("git-add--interactive: replace hunk
recounting with apply --recount", 2008-7-2) if a hunk is skipped then
we rely on the context lines to apply subsequent hunks in the right
place. While this works most of the time it is possible for hunks to
end up being applied in the wrong place. To fix this adjust the offset
of subsequent hunks to correct for any change in the number of
insertions or deletions due to the skipped hunk. The change in offset
due to edited hunks that have the number of insertions or deletions
changed is ignored here, it will be fixed in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a hunk is skipped by add -i the offsets of subsequent hunks are
not adjusted to account for any missing insertions due to the skipped
hunk. Most of the time this does not matter as apply uses the context
lines to apply the subsequent hunks in the correct place, however in
pathological cases the context lines will match at the now incorrect
offset and the hunk will be applied in the wrong place. The offsets of
hunks following an edited hunk that has had the number of insertions
or deletions changed also need to be updated in the same way. Add
failing tests to demonstrate this.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a filter when comparing diffs to fix the value of non-zero hashes
in diff index lines so we're not hard coding sha1 hash values in the
expected output. This makes it easier to change the expected output if
a test is edited as we don't need to worry about the exact hash value
and means the tests will work when the hash algorithm is transitioned
away from sha1.
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify things slightly by using the above helpers.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Indent here documents in line with the current style for tests.
While at it, quote the end marker of here-docs that do not use
variable interpolation.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For 'add -i' and 'add -p', the only action we can take on a dirty
submodule entry is update the index with a new value from its HEAD. The
content changes inside (from its own index, untracked files...) do not
matter, at least until 'git add -i' learns about launching a new
interactive add session inside a submodule.
Ignore all other submodules changes except HEAD. This reduces the number
of entries the user has to check through in 'git add -i', and the number
of 'no' they have to answer to 'git add -p' when dirty submodules are
present.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be handy to use `--color=always` (or it's synonym
`--color`) on the command-line to convince a command to
produce color even if it's stdout isn't going to the
terminal or a pager.
What's less clear is whether it makes sense to set config
variables like color.ui to `always`. For a one-shot like:
git -c color.ui=always ...
it's potentially useful (especially if the command doesn't
directly support the `--color` option). But setting `always`
in your on-disk config is much muddier, as you may be
surprised when piped commands generate colors (and send them
to whatever is consuming the pipe downstream).
Some people have done this anyway, because:
1. The documentation for color.ui makes it sound like
using `always` is a good idea, when you almost
certainly want `auto`.
2. Traditionally not every command (and especially not
plumbing) respected color.ui in the first place. So
the confusion came up less frequently than it might
have.
The situation changed in 136c8c8b8f (color: check color.ui
in git_default_config(), 2017-07-13), which negated point
(2): now scripts using only plumbing commands (like
add-interactive) are broken by this setting.
That commit was fixing real issues (e.g., by making
`color.ui=never` work, since `auto` is the default), so we
don't want to just revert it. We could turn `always` into a
noop in plumbing commands, but that creates a hard-to-explain
inconsistency between the plumbing and other commands.
Instead, let's just turn `always` into `auto` for all config.
This does break the "one-shot" config shown above, but again,
we're probably better to have simple and consistent rules than
to try to special-case command-line config.
There is one place where `always` should retain its meaning:
on the command line, `--color=always` should continue to be
the same as `--color`, overriding any isatty checks. Since the
command-line parser also depends on git_config_colorbool(), we
can use the existence of the "var" string to deterine whether
we are serving the command-line or the config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing whether "add -p" can generate colors, we set
color.ui to "always". This isn't a very good test, as in the
real-world a user typically has "auto" coupled with stdout
going to a terminal (and it's plausible that this could mask
a real bug in add--interactive if we depend on plumbing's
isatty check).
Let's switch to test_terminal, which gives us a more
realistic environment. This also prepare us for future
changes to the "always" color option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" were updated in 2.12 timeframe to cope with custom
core.commentchar but the implementation was buggy and a
metacharacter like $ and * did not work.
* jk/add-p-commentchar-fix:
add--interactive: quote commentChar regex
add--interactive: handle EOF in prompt_yesno
Since c9d961647 (i18n: add--interactive: mark
edit_hunk_manually message for translation, 2016-12-14),
when the user asks to edit a hunk manually, we respect
core.commentChar in generating the edit instructions.
However, when we then strip out comment lines, we use a
simple regex like:
/^$commentChar/
If your chosen comment character is a regex metacharacter,
then that will behave in a confusing manner ("$", for
instance, would only eliminate blank lines, not actual
comment lines).
We can fix that by telling perl not to respect
metacharacters.
Reported-by: Christian Rösch <christian@croesch.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous to commit 5d8f084a5 (pathspec: simpler logic to prefix original
pathspec elements, 2017-01-04), we were always using the computed
`match` variable to perform pathspec matching whenever
`PATHSPEC_PREFIX_ORIGIN` is set. This is for example useful when passing
the parsed pathspecs to other commands, as the computed `match` may
contain a pathspec relative to the repository root. The commit changed
this logic to only do so when we do have an actual prefix and when
literal pathspecs are deactivated.
But this change may actually break some commands which expect passed
pathspecs to be relative to the repository root. One such case is `git
add --patch`, which now fails when using relative paths from a
subdirectory. For example if executing "git add -p ../foo.c" in a
subdirectory, the `git-add--interactive` command will directly pass
"../foo.c" to `git-ls-files`. As ls-files is executed at the
repository's root, the command will notice that "../foo.c" is outside
the repository and fail.
Fix the issue by again using the computed `match` variable when
`PATHSPEC_PREFIX_ORIGIN` is set and global literal pathspecs are
deactivated. Note that in contrast to previous behavior, we will now
always call `prefix_magic` regardless of whether a prefix is actually
set. But this is the right thing to do: when the `match` variable has
been resolved to the repository's root, it will be set to an empty
string. When passing the empty string directly to other commands, it
will result in a warning regarding deprecated empty pathspecs. By always
adding the prefix magic, we will end up with at least the string
":(prefix:0)" and thus avoid the warning.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Acked-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
"git add -p <pathspec>" unnecessarily expanded the pathspec to a
list of individual files that matches the pathspec by running "git
ls-files <pathspec>", before feeding it to "git diff-index" to see
which paths have changes, because historically the pathspec
language supported by "diff-index" was weaker. These days they are
equivalent and there is no reason to internally expand it. This
helps both performance and avoids command line argument limit on
some platforms.
* jk/add-i-use-pathspecs:
add--interactive: do not expand pathspecs with ls-files
When we want to get the list of modified files, we first
expand any user-provided pathspecs with "ls-files", and then
feed the resulting list of paths as arguments to
"diff-index" and "diff-files". If your pathspec expands into
a large number of paths, you may run into one of two
problems:
1. The OS may complain about the size of the argument
list, and refuse to run. For example:
$ (ulimit -s 128 && git add -p drivers)
Can't exec "git": Argument list too long at .../git-add--interactive line 177.
Died at .../git-add--interactive line 177.
That's on the linux.git repository, which has about 20K
files in the "drivers" directory (none of them modified
in this case). The "ulimit -s" trick is necessary to
show the problem on Linux even for such a gigantic set
of paths. Other operating systems have much smaller
limits (e.g., a real-world case was seen with only 5K
files on OS X).
2. Even when it does work, it's really slow. The pathspec
code is not optimized for huge numbers of paths. Here's
the same case without the ulimit:
$ time git add -p drivers
No changes.
real 0m16.559s
user 0m53.140s
sys 0m0.220s
We can improve this by skipping "ls-files" completely, and
just feeding the original pathspecs to the diff commands.
This solution was discussed in 2010:
http://public-inbox.org/git/20100105041438.GB12574@coredump.intra.peff.net/
but at the time the diff code's pathspecs were more
primitive than those used by ls-files (e.g., they did not
support globs). Making the change would have caused a
user-visible regression, so we didn't.
Since then, the pathspec code has been unified, and the diff
commands natively understand pathspecs like '*.c'.
This patch implements that solution. That skips the
argument-list limits, and the result runs much faster:
$ time git add -p drivers
No changes.
real 0m0.149s
user 0m0.116s
sys 0m0.080s
There are two new tests. The first just exercises the
globbing behavior to confirm that we are not causing a
regression there. The second checks the actual argument
behavior using GIT_TRACE. We _could_ do it with the "ulimit
-s" trick, as above. But that would mean the test could only
run where "ulimit -s" works. And tests of that sort are
expensive, because we have to come up with enough files to
actually bust the limit (we can't just shrink the "128" down
infinitely, since it is also the in-program stack size).
Finally, two caveats and possibilities for future work:
a. This fixes one argument-list expansion, but there may
be others. In fact, it's very likely that if you run
"git add -i" and select a large number of modified
files that the script would try to feed them all to a
single git command.
In practice this is probably fine. The real issue here
is that the argument list was growing with the _total_
number of files, not the number of modified or selected
files.
b. If the repository contains filenames with literal wildcard
characters (e.g., "foo*"), the original code expanded
them via "ls-files" and then fed those wildcard names
to "diff-index", which would have treated them as
wildcards. This was a bug, which is now fixed (though
unless you really go through some contortions with
":(literal)", it's likely that your original pathspec
would match whatever the accidentally-expanded wildcard
would anyway).
So this takes us one step closer to working correctly
with files whose names contain wildcard characters, but
it's likely that others remain (e.g., if "git add -i"
feeds the selected paths to "git add").
Reported-by: Wincent Colaiuta <win@wincent.com>
Reported-by: Mislav Marohnić <mislav.marohnic@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invoked as "git add -i", each menu interactive menu
option prompts the user to select a list of files. This
includes the "patch" option, which gets the list before
starting the hunk-selection loop.
As "git add -p", it behaves differently, and jumps straight
to the hunk selection loop.
Since 0539d5e6d (i18n: add--interactive: mark patch prompt
for translation, 2016-12-14), the "add -i" case mistakenly
jumps to straight to the hunk-selection loop. Prior to that
commit the distinction between the two cases was managed by
the $patch_mode variable. That commit used $patch_mode for
something else, and moved the old meaning to the "$cmd"
variable. But it forgot to update the $patch_mode check
inside patch_update_cmd() which controls the file-list
behavior.
The simplest fix would be to change that line to check $cmd.
But while we're here, let's use a less obscure name for this
flag: $patch_mode_only, a boolean which tells whether we are
in full-interactive mode or only in patch-mode.
Reported-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test passes if one replaces the 'e' command with a 'y' command in
the 'add -p' session.
Reported-by: Tanky Woo <wtq1990@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
