The apply code is not prepared to handle extremely large files. It uses
"int" in some places, and "unsigned long" in others.
This combination leads to unfortunate problems when switching between
the two types. Using "int" prevents us from handling large files, since
large offsets will wrap around and spill into small negative values,
which can result in wrong behavior (like accessing the patch buffer with
a negative offset).
Converting from "unsigned long" to "int" also has truncation problems
even on LLP64 platforms where "long" is the same size as "int", since
the former is unsigned but the latter is not.
To avoid potential overflow and truncation issues in `git apply`, apply
similar treatment as in dcd1742e56 (xdiff: reject files larger than
~1GB, 2015-09-24), where the xdiff code was taught to reject large
files for similar reasons.
The maximum size was chosen somewhat arbitrarily, but picking a value
just shy of a gigabyte allows us to double it without overflowing 2^31-1
(after which point our value would wrap around to a negative number).
To give ourselves a bit of extra margin, the maximum patch size is a MiB
smaller than a full GiB, which gives us some slop in case we allocate
"(records + 1) * sizeof(int)" or similar.
Luckily, the security implications of these conversion issues are
relatively uninteresting, because a victim needs to be convinced to
apply a malicious patch.
Reported-by: 정재우 <thebound7@gmail.com>
Suggested-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We squelch error/warning output by passing a noop handler to
set_error_routine(). We need to tell the compiler that this is intended
so that it doesn't trigger -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In parse_git_diff_header(), we have a table-driven parser that maps
strings to handler functions. Not all handlers need all of the
parameters; let's mark the unused ones to appease -Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and apply coccinelle rule to discourage an explicit
comparison between a pointer and NULL, and applies the clean-up to
the maintenance track.
* ep/maint-equals-null-cocci:
tree-wide: apply equals-null.cocci
tree-wide: apply equals-null.cocci
contrib/coccinnelle: add equals-null.cocci
Object-file API shuffling.
* ab/object-file-api-updates:
object-file API: pass an enum to read_object_with_reference()
object-file.c: add a literal version of write_object_file_prepare()
object-file API: have hash_object_file() take "enum object_type"
object API: rename hash_object_file_literally() to write_*()
object-file API: split up and simplify check_object_signature()
object API users + docs: check <0, not !0 with check_object_signature()
object API docs: move check_object_signature() docs to cache.h
object API: correct "buf" v.s. "map" mismatch in *.c and *.h
object-file API: have write_object_file() take "enum object_type"
object-file API: add a format_object_header() function
object-file API: return "void", not "int" from hash_object_file()
object-file.c: split up declaration of unrelated variables
Create a public release_patch() version of the private free_patch()
function added in 13b5af22f3 (apply: move libified code from
builtin/apply.c to apply.{c,h}, 2016-04-22). Unlike the existing
function this one doesn't free() the "struct patch" itself, so we can
use it for variables on the stack.
Use it in range-diff.c to fix a memory leak in common range-diff
invocations, e.g.:
git -P range-diff origin/master origin/next origin/seen
Would emit several errors when compiled with SANITIZE=leak, but now
runs cleanly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hash_object_file() function to take an "enum
object_type".
Since a preceding commit all of its callers are passing either
"{commit,tree,blob,tag}_type", or the result of a call to type_name(),
the parse_object() caller that would pass NULL is now using
stream_object_signature().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the write_object_file() function to take an "enum object_type"
instead of a "const char *type". Its callers either passed
{commit,tree,blob,tag}_type and can pass the corresponding OBJ_* type
instead, or were hardcoding strings like "blob".
This avoids the back & forth fragility where the callers of
write_object_file() would have the enum type, and convert it
themselves via type_name(). We do have to now do that conversion
ourselves before calling write_object_file_prepare(), but those
codepaths will be similarly adjusted in subsequent commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
"git apply" (ab)used the util pointer of the string-list to keep
track of how each symbolic link needs to be handled, which has been
simplified by using strset.
* rs/apply-symlinks-use-strset:
apply: use strsets to track symlinks
Since some callers may want to send warning messages to somewhere other
than stdout/stderr, stop printing "warning: Cannot merge binary files"
from ll-merge and instead modify the return status of ll_merge() to
indicate when a merge of binary files has occurred. Message printing
probably does not belong in a "low-level merge" anyway.
This commit continues printing the message as-is, just from the callers
instead of within ll_merge(). Future changes will start handling the
message differently in the merge-ort codepath.
There was one special case here: the callers in rerere.c do NOT check
for and print such a message; since those code paths explicitly skip
over binary files, there is no reason to check for a return status of
LL_MERGE_BINARY_CONFLICT or print the related message.
Note that my methodology included first modifying ll_merge() to return
a struct, so that the compiler would catch all the callers for me and
ensure I had modified all of them. After modifying all of them, I then
changed the struct to an enum.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
"git apply --3way" bypasses the attempt to do a three-way
application in more cases to address the regression caused by the
recent change to use direct application as a fallback.
* jz/apply-3-corner-cases:
git-apply: skip threeway in add / rename cases
Symlink changes are tracked in a string_list, with the util pointer
value indicating whether a symlink is kept or removed. Using fake
pointer values requires awkward casts. Use one strset for each type of
change instead to simplify and shorten the code.
Original-patch-by: Jessica Clarke <jrtc27@jrtc27.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain invocations of "git apply --3way" will attempt threeway and
fail due to missing objects, even though git is able to fall back on
apply_fragments and apply the patch successfully with a return value
of 0. To fix, return early from try_threeway() in the following
cases:
- When the patch is a rename and no lines have changed. In this
case, "git diff" doesn't record the blob info, so 3way is neither
possible nor necessary.
- When the patch is an addition and there is no add/add conflict,
i.e. direct_to_threeway is false. In this case, threeway will
fail since the preimage is not in cache, but isn't necessary
anyway since there is no conflict.
This fixes a few unecessary error messages when applying these kinds
of patches with --3way.
It also fixes a reported issue where applying a concatenation of
several git produced patches will fail when those patches involve a
deletion followed by creation of the same file. Add a test for this
case too. (test provided by <i@zenithal.me>)
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users or scripts will pipe "git diff"
output to "git apply" when replaying diffs
or commits. In these cases, they will rely
on the return value of "git apply" to know
whether the diff was applied successfully.
However, for empty commits, "git apply" will
fail. This complicates scripts since they
have to either buffer the diff and check
its length, or run diff again with "exit-code",
essentially doing the diff twice.
Add the "--allow-empty" flag to "git apply"
which allows it to handle both empty diffs
and empty commits created by "git format-patch
--always" by doing nothing and returning 0.
Add tests for both with and without --allow-empty.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace OPT_VERBOSE with OPT_VERBOSITY.
This adds a --quiet flag to "git apply" so
the user can turn down the verbosity.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
The ll_binary_merge() function assumes that the ancestor blob is
different from either side of the new versions, and always fails
the merge in conflict, unless -Xours or -Xtheirs is in effect.
The normal "merge" machineries all resolve the trivial cases
(e.g. if our side changed while their side did not, the result
is ours) without triggering the file-level merge drivers, so the
assumption is warranted.
The code path in "git apply --3way", however, does not check for
the trivial three-way merge situation and always calls the
file-level merge drivers. This used to be perfectly OK back
when we always first attempted a straight patch application and
used the three-way code path only as a fallback. Any binary
patch that can be applied as a trivial three-way merge (e.g. the
patch is based exactly on the version we happen to have) would
always cleanly apply, so the ll_binary_merge() that is not
prepared to see the trivial case would not have to handle such a
case.
This no longer is true after we made "--3way" to mean "first try
three-way and then fall back to straight application", and made
"git apply -3" on a binary patch that is based on the current
version no longer apply.
Teach "git apply -3" to first check for the trivial merge cases
and resolve them without hitting the file-level merge drivers.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
[jc: stolen tests from Jerry's patch]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" miscounted the bytes and failed to read to the end of
binary hunks.
* jk/apply-binary-hunk-parsing-fix:
apply: keep buffer/size pair in sync when parsing binary hunks
We parse through binary hunks by looping through the buffer with code
like:
llen = linelen(buffer, size);
...do something with the line...
buffer += llen;
size -= llen;
However, before we enter the loop, there is one call that increments
"buffer" but forgets to decrement "size". As a result, our "size" is off
by the length of that line, and subsequent calls to linelen() may look
past the end of the buffer for a newline.
The fix is easy: we just need to decrement size as we do elsewhere.
This bug goes all the way back to 0660626caf (binary diff: further
updates., 2006-05-05). Presumably nobody noticed because it only
triggers if the patch is corrupted, and even then we are often "saved"
by luck. We use a strbuf to store the incoming patch, so we overallocate
there, plus we add a 16-byte run of NULs as slop for memory comparisons.
So if this happened accidentally, the common case is that we'd just read
a few uninitialized bytes from the end of the strbuf before producing
the expected "this patch is corrupted" error complaint.
However, it is possible to carefully construct a case which reads off
the end of the buffer. The included test does so. It will pass both
before and after this patch when run normally, but using a tool like
ASan shows that we get an out-of-bounds read before this patch, but not
after.
Reported-by: Xingman Chen <xichixingman@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change all in-tree users of the string_list_init(LIST, BOOL) API to
use string_list_init_{nodup,dup}(LIST) instead.
As noted in the preceding commit let's leave the now-unused
string_list_init() wrapper in-place for any in-flight users, it can be
removed at some later date.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we swapped the order of --3way fallback, we forgot to adjust
the message we give when the first method fails and the second
method is attempted (which used to be "direct application failed
hence we try 3way", now it is the other way around).
* jz/apply-3way-first-message-fix:
apply: adjust messages to account for --3way changes
"git apply" specifically calls out when it is falling back to 3way
merge application. Since the order changed to preferring 3way and
falling back to direct application, continue that behavior by
printing whenever 3way fails and git has to fall back.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" does not allow "--cached" and "--3way" to be used
together, since "--3way" writes conflict markers into the working
tree.
Allow "git apply" to accept "--cached" and "--3way" at the same
time. When a single file auto-resolves cleanly, the result is
placed in the index at stage #0 and the command exits with 0 status.
For a file that has a conflict which cannot be cleanly
auto-resolved, the original contents from common ancestor (stage
conflict at the content level, and the command exists with non-zero
status, because there is no place (like the working tree) to leave a
half-resolved merge for the user to resolve.
The user can use `git diff` to view the contents of the conflict, or
`git checkout -m -- .` to regenerate the conflict markers in the
working directory.
Don't attempt rerere in this case since it depends on conflict
markers written to file for its database storage and lookup. There
would be two main changes required to get rerere working:
1. Allow the rerere api to accept in memory object rather than
files, which would allow us to pass in the conflict markers
contained in the result from ll_merge().
2. Rerere can't write to the working directory, so it would have to
apply the result to cache stage #0 directly. A flag would be
needed to control this.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The apply_fragments() method of "git apply"
can silently apply patches incorrectly if
a file has repeating contents. In these
cases a three-way merge is capable of applying
it correctly in more situations, and will
show a conflict rather than applying it
incorrectly. However, because the patches
apply "successfully" using apply_fragments(),
git will never fall back to the merge, even
if the "--3way" flag is used, and the user has
no way to ensure correctness by forcing the
three-way merge method.
Change the behavior so that when "--3way" is used,
git will always try the three-way merge first and
will only fall back to apply_fragments() in cases
where blobs are not available or some other error
(but not in the case of a merge conflict).
Since user-facing results will be different,
this has backwards compatibility implications
for users depending on the old behavior. In
addition, the three-way merge will be slower
than direct patch application.
Signed-off-by: Jerry Zhang <jerry@skydio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preparatory API changes for parallel checkout.
* mt/parallel-checkout-part-1:
entry: add checkout_entry_ca() taking preloaded conv_attrs
entry: move conv_attrs lookup up to checkout_entry()
entry: extract update_ce_after_write() from write_entry()
entry: make fstat_output() and read_blob_entry() public
entry: extract a header file for entry.c functions
convert: add classification for conv_attrs struct
convert: add get_stream_filter_ca() variant
convert: add [async_]convert_to_working_tree_ca() variants
convert: make convert_attrs() and convert structs public
The declarations of entry.c's public functions and structures currently
reside in cache.h. Although not many, they contribute to the size of
cache.h and, when changed, cause the unnecessary recompilation of
modules that don't really use these functions. So let's move them to a
new entry.h header. While at it let's also move a comment related to
checkout_entry() from entry.c to entry.h as it's more useful to describe
the function there.
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove this unreachable code. It was found by SunCC, it's found by a
non-fatal warning emitted by SunCC. It's one of the things it's more
vehement about than GCC & Clang.
It complains about a lot of other similarly unreachable code, e.g. a
BUG(...) without a "return", and a "return 0" after a long if/else,
both of whom have "return" statements. Those are also genuine
redundancies to a compiler, but arguably make the code a bit easier to
read & less fragile to maintain.
These return/break cases are just unnecessary however, and as seen
here the surrounding code just did a plain "return" without a "break"
already.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" adjusted the permission bits of working-tree files and
directories according core.sharedRepository setting by mistake and
for a long time, which has been corrected.
* mt/do-not-use-scld-in-working-tree:
apply: don't use core.sharedRepository to create working tree files
core.sharedRepository defines which permissions Git should set when
creating files in $GIT_DIR, so that the repository may be shared with
other users. But (in its current form) the setting shouldn't affect how
files are created in the working tree. This is not respected by apply
and am (which uses apply), when creating leading directories:
$ cat d.patch
diff --git a/d/f b/d/f
new file mode 100644
index 0000000..e69de29
Apply without the setting:
$ umask 0077
$ git apply d.patch
$ ls -ld d
drwx------
Apply with the setting:
$ umask 0077
$ git -c core.sharedRepository=0770 apply d.patch
$ ls -ld d
drwxrws---
Only the leading directories are affected. That's because they are
created with safe_create_leading_directories(), which calls
adjust_shared_perm() to set the directories' permissions based on
core.sharedRepository. To fix that, let's introduce a variant of this
function that ignores the setting, and use it in apply. Also add a
regression test and a note in the function documentation about the use
of each variant according to the destination (working tree or git
dir).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A patch changing a symlink into a file is written with 2 sections (in
the code, represented as "struct patch"): firstly, the deletion of the
symlink, and secondly, the creation of the file. When applying that
patch with -R, the sections are reversed, so we get:
(1) creation of a symlink, then
(2) deletion of a file.
This causes an issue when the "deletion of a file" section is checked,
because Git observes that the so-called file is not a file but a
symlink, resulting in a "wrong type" error message.
What we want is:
(1) deletion of a file, then
(2) creation of a symlink.
In the code, this is reflected in the behavior of previous_patch() when
invoked from check_preimage() when the deletion is checked. Creation
then deletion means that when the deletion is checked, previous_patch()
returns the creation section, triggering a mode conflict resulting in
the "wrong type" error message. But deletion then creation means that
when the deletion is checked, previous_patch() returns NULL, so the
deletion mode is checked against lstat, which is what we want.
There are also other ways a patch can contain 2 sections referencing the
same file, for example, in 7a07841c0b ("git-apply: handle a patch that
touches the same path more than once better", 2008-06-27). "git apply
-R" fails in the same way, and this commit makes this case succeed.
Therefore, when building the list of sections, build them in reverse
order (by adding to the front of the list instead of the back) when -R
is passed.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
Recent versions of "git diff-files" shows a diff between the index
and the working tree for "intent-to-add" paths as a "new file"
patch; "git apply --cached" should be able to take "git diff-files"
and should act as an equivalent to "git add" for the path, but the
command failed to do so for such a path.
* rp/apply-cached-with-i-t-a:
t4140: test apply with i-t-a paths
apply: make i-t-a entries never match worktree
apply: allow "new file" patches on i-t-a entries
As evidenced by the leak fixes in the previous commit, the "const" in
git_config_get_string_const() clearly misleads people into thinking that
it does not allocate a copy of the string. We can fix this by renaming
it, but it's easier still to just drop it. Of the four remaining
callers:
- The one in git_config_parse_expiry() still needs to allocate, since
that's what its callers expect. We can just use the non-const
version and cast our pointer. Slightly ugly, but the damage is
contained in one spot.
- The two in apply are writing to global "const char *" variables, and
need to continue allocating. We often mark these as const because we
assign default string literals to them. But in this case we don't do
that, so we can just declare them as real "char *" pointers and use
the non-const version.
- The call in checkout doesn't actually need a copy; it can just use
the non-allocating "tmp" version of the function.
The function is also mentioned in the MyFirstContribution document. We
can swap that call out for the non-allocating "tmp" variant, which fits
well in the example given.
We'll drop the "configset" and "repo" variants, as well (which are
unused).
Note that this frees up the "const" name, so we could rename the "tmp"
variant back to that. But let's give some time for topics in flight to
adapt to the new code before doing so (if we do it too soon, the
function semantics will change but the compiler won't alert us).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By definition, an intent-to-add index entry can never match the
worktree, because worktrees have no concept of intent-to-add entries.
Therefore, "apply --index" should always fail on intent-to-add paths.
Because check_preimage() calls verify_index_match(), it already fails
for patches other than creation patches, which check_preimage() ignores.
This patch adds a check to check_preimage()'s rough equivalent for
creation patches, check_to_create().
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-files recently changed to treat changes to paths marked "intent to
add" in the index as new file diffs rather than diffs from the empty
blob. However, apply refuses to apply new file diffs on top of existing
index entries, except in the case of renames. This causes "git add -p",
which uses apply, to fail when attempting to stage hunks from a file
when intent to add has been recorded.
This changes the logic in check_to_create() which checks if an entry
already exists in an index in two ways: first, we only search for an
index entry at all if ok_if_exists is false; second, we check for the
CE_INTENT_TO_ADD flag on any index entries we find and allow the apply
to proceed if it is set.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying a binary patch, as an optimization, "apply" checks if the
postimage is already present. During this fetch, it is perfectly
expected for the postimage not to be present, so there is no need to
lazy-fetch missing objects. Teach "apply" not to lazy-fetch in this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a variety of situations where a filter process can make use of
some additional metadata. For example, some people find the ident
filter too limiting and would like to include the commit or the branch
in their smudged files. This information isn't available during
checkout as HEAD hasn't been updated at that point, and it wouldn't be
available in archives either.
Let's add a way to pass this metadata down to the filter. We pass the
blob we're operating on, the treeish (preferring the commit over the
tree if one exists), and the ref we're operating on. Note that we won't
pass this information in all cases, such as when renormalizing or when
we're performing diffs, since it doesn't make sense in those cases.
The data we currently get from the filter process looks like the
following:
command=smudge
pathname=git.c
0000
With this change, we'll get data more like this:
command=smudge
pathname=git.c
refname=refs/tags/v2.25.1
treeish=c522f061d551c9bb8684a7c3859b2ece4499b56b
blob=7be7ad34bd053884ec48923706e70c81719a8660
0000
There are a couple things to note about this approach. For operations
like checkout, treeish will always be a commit, since we cannot check
out individual trees, but for other operations, like archive, we can end
up operating on only a particular tree, so we'll provide only a tree as
the treeish. Similar comments apply for refname, since there are a
variety of cases in which we won't have a ref.
This commit wires up the code to print this information, but doesn't
pass any of it at this point. In a future commit, we'll have various
code paths pass the actual useful data down.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow hash_object_file() to work on arbitrary repos by introducing a
git_hash_algo parameter. Change callers which have a struct repository
pointer in their scope to pass on the git_hash_algo from the said repo.
For all other callers, pass on the_hash_algo, which was already being
used internally at hash_object_file(). This functionality will be used
in the following patch to make check_object_signature() be able to work
on arbitrary repos (which, in turn, will be used to fix an
inconsistency at object.c:parse_object()).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test coverage update in preparation for further work on "git add -i".
* js/add-i-a-bit-more-tests:
apply --allow-overlap: fix a corner case
git add -p: use non-zero exit code when the diff generation failed
t3701: verify that the diff.algorithm config setting is handled
t3701: verify the shown messages when nothing can be added
t3701: add a test for the different `add -p` prompts
t3701: avoid depending on the TTY prerequisite
t3701: add a test for advanced split-hunk editing
Doc update for the mailing list archiving and nntp service.
* jk/lore-is-the-archive:
doc: replace public-inbox links with lore.kernel.org
doc: recommend lore.kernel.org over public-inbox.org
