"git pull" without "--recurse-submodules=<arg>" made
submodule.recurse take precedence over fetch.recurseSubmodules by
mistake, which has been corrected.
* gc/pull-recurse-submodules:
pull: do not let submodule.recurse override fetch.recurseSubmodules
"git log --since=X" will stop traversal upon seeing a commit that
is older than X, but there may be commits behind it that is younger
than X when the commit was created with a faulty clock. A new
option is added to keep digging without stopping, and instead
filter out commits with timestamp older than X.
* mv/log-since-as-filter:
log: "--since-as-filter" option is a non-terminating "--since" variant
The temporary files fed to external diff command are now generated
inside a new temporary directory under the same basename.
* rs/external-diff-tempfile:
diff: use mks_tempfile_dt()
tempfile: add mks_tempfile_dt()
New tests for the safe.directory mechanism.
* sg/safe-directory-tests-and-docs:
safe.directory: document and check that it's ignored in the environment
t0033-safe-directory: check when 'safe.directory' is ignored
t0033-safe-directory: check the error message without matching the trash dir
Fix a bug in "git pull" where `submodule.recurse` is preferred over
`fetch.recurseSubmodules` when performing a fetch
(Documentation/config/fetch.txt says that `fetch.recurseSubmodules`
should be preferred.). Do this by passing the value of the
"--recurse-submodules" CLI option to the underlying fetch, instead of
passing a value that combines the CLI option and config variables.
In other words, this bug occurred because builtin/pull.c is conflating
two similar-sounding, but different concepts:
- Whether "git pull" itself should care about submodules e.g. whether it
should update the submodule worktrees after performing a merge.
- The value of "--recurse-submodules" to pass to the underlying "git
fetch".
Thus, when `submodule.recurse` is set, the underlying "git fetch" gets
invoked with "--recurse-submodules[=value]", overriding the value of
`fetch.recurseSubmodules`.
An alternative (and more obvious) approach to fix the bug would be to
teach "git pull" to understand `fetch.recurseSubmodules`, but the
proposed solution works better because:
- We don't maintain two identical config-parsing implementions in "git
pull" and "git fetch".
- It works better with other commands invoked by "git pull" e.g. "git
merge" won't accidentally respect `fetch.recurseSubmodules`.
Reported-by: Huang Zou <huang.zou@schrodinger.com>
Helped-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit summary shown after making a commit is matched to what
is given in "git status" not to use the break-rewrite heuristics.
* rs/commit-summary-wo-break-rewrite:
commit, sequencer: turn off break_opt for commit summary
Avoid problems from interaction between malloc_check and address
sanitizer.
* pw/test-malloc-with-sanitize-address:
tests: make SANITIZE=address imply TEST_NO_MALLOC_CHECK
"git rebase --keep-base <upstream> <branch-to-rebase>" computed the
commit to rebase onto incorrectly, which has been corrected.
* ah/rebase-keep-base-fix:
rebase: use correct base for --keep-base when a branch is given
The progress meter of "git blame" was showing incorrect numbers
when processing only parts of the file.
* ea/progress-partial-blame:
blame: report correct number of lines in progress when using ranges
Reimplement "vimdiff[123]" mergetool drivers with a more generic
layout mechanism.
* fr/vimdiff-layout:
mergetools: add description to all diff/merge tools
vimdiff: add tool documentation
vimdiff: integrate layout tests in the unit tests framework ('t' folder)
vimdiff: new implementation with layout support
The performance of the "untracked cache" feature has been improved
when "--untracked-files=<mode>" and "status.showUntrackedFiles"
are combined.
* tk/untracked-cache-with-uall:
untracked-cache: support '--untracked-files=all' if configured
untracked-cache: test untracked-cache-bypassing behavior with -uall
"git format-patch <args> -- <pathspec>" lost the pathspec when
showing the second and subsequent commits, which has been
corrected.
* rs/format-patch-pathspec-fix:
2.36 format-patch regression fix
"git fast-export -- <pathspec>" lost the pathspec when showing the
second and subsequent commits, which has been corrected.
* rs/fast-export-pathspec-fix:
2.36 fast-export regression fix
"git show <commit1> <commit2>... -- <pathspec>" lost the pathspec
when showing the second and subsequent commits, which has been
corrected.
* jc/show-pathspec-fix:
2.36 show regression fix
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git fast-export doesn't set no_free, so path limiting stopped working
after the first commit. Set the flag and add a basic test to make sure
only changes to the specified files are exported.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
e900d494dc (diff: add an API for deferred freeing, 2021-02-11) added a
way to allow reusing diffopts: the no_free bit. 244c27242f (diff.[ch]:
have diff_free() call clear_pathspec(opts.pathspec), 2022-02-16) made
that mechanism mandatory.
git format-patch only sets no_free when --output is given, causing it to
forget pathspecs after the first commit. Set no_free unconditionally
instead.
The existing test was unable to detect this breakage because it checks
stderr for the absence of a certain string, but format-patch writes to
stdout. Also the test was not checking the case of one commit modifying
multiple files and a pathspec limiting the diff. Replace it with a more
thorough one.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
e900d494 (diff: add an API for deferred freeing, 2021-02-11)
introduced a mechanism to delay freeing resources held in
diff_options struct that need to be kept as long as the struct will
be reused to compute diff. "git log -p" was taught to utilize the
mechanism but it was done with an incorrect assumption that the
underlying helper function, cmd_log_walk(), is called only once,
and it is OK to do the freeing at the end of it.
Alas, for "git show A B", the function is called once for each
commit given, so it is not OK to free the resources until we finish
calling it for all the commits given from the command line.
During 2.36 release cycle, we started clearing the <pathspec> as
part of this freeing, which made the bug a lot more visible.
Fix this breakage by tweaking how cmd_log_walk() frees the resources
at the end and using a variant of it that does not immediately free
the resources to show each commit object from the command line in
"git show".
Protect the fix with a few new tests.
Reported-by: Daniel Li <dan@danielyli.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff-tree --stdin" has been broken for about a year, but 2.36
release broke it even worse by breaking running the command with
<pathspec>, which in turn broke "gitk" and got noticed. This has
been corrected by aligning its behaviour to that of "log".
* jc/diff-tree-stdin-fix:
2.36 gitk/diff-tree --stdin regression fix
"git submodule update" without pathspec should silently skip an
uninitialized submodule, but it started to become noisy by mistake.
* gc/submodule-update-part2:
submodule--helper: fix initialization of warn_if_uninitialized
The description of 'safe.directory' mentions that it's respected in
the system and global configs, and ignored in the repository config
and on the command line, but it doesn't mention whether it's respected
or ignored when specified via environment variables (nor does the
commit message adding 'safe.directory' [1]).
Clarify that 'safe.directory' is ignored when specified in the
environment, and add tests to make sure that it remains so.
[1] 8959555cee (setup_git_directory(): add an owner check for the
top-level directory, 2022-03-02)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the documentation 'safe.directory' "is only respected
when specified in a system or global config, not when it is specified
in a repository config or via the command line option -c
safe.directory=<path>".
Add tests to check that 'safe.directory' in the repository config or
on the command line is indeed ignored.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8959555cee (setup_git_directory(): add an owner check for the
top-level directory, 2022-03-02) when git finds itself in a repository
owned by someone else, it aborts with a "fatal: unsafe repository
(<repo path>)" error message and an advice about how to set the
'safe.directory' config variable to mark that repository as safe.
't0033-safe-directory.sh' contains tests that check that this feature
and handling said config work as intended. To ensure that git dies
for the right reason, several of those tests check that its standard
error contains the name of that config variable, but:
- it only appears in the advice part, not in the actual error
message.
- it is interpreted as a regexp by 'grep', so, because of the dot,
it matches the name of the test script and the path of the trash
directory as well. Consequently, these tests could be fooled by
any error message that would happen to include the path of the
test repository.
Tighten these checks to look for "unsafe repository" instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The .warn_if_uninitialized member was introduced by 48308681
(git submodule update: have a dedicated helper for cloning,
2016-02-29) to submodule_update_clone struct and initialized to
false. When c9911c93 (submodule--helper: teach update_data more
options, 2022-03-15) moved it to update_data struct, it started
to initialize it to true but this change was not explained in
its log message.
The member is set to true only when pathspec was given, and is
used when a submodule that matched the pathspec is found
uninitialized to give diagnostic message. "submodule update"
without pathspec is supposed to iterate over all submodules
(i.e. without pathspec limitation) and update only the
initialized submodules, and finding uninitialized submodules
during the iteration is a totally expected and normal thing that
should not be warned.
[jc: added tests]
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only surfaced as a regression after 2.36 release, but the
breakage was already there with us for at least a year.
The diff_free() call is to be used after we completely finished with
a diffopt structure. After "git diff A B" finishes producing
output, calling it before process exit is fine. But there are
commands that prepares diff_options struct once, compares two sets
of paths, releases resources that were used to do the comparison,
then reuses the same diff_option struct to go on to compare the next
two sets of paths, like "git log -p".
After "git log -p" finishes showing a single commit, calling it
before it goes on to the next commit is NOT fine. There is a
mechanism, the .no_free member in diff_options struct, to help "git
log" to avoid calling diff_free() after showing each commit and
instead call it just one. When the mechanism was introduced in
e900d494 (diff: add an API for deferred freeing, 2021-02-11),
however, we forgot to do the same to "diff-tree --stdin", which *is*
a moral equivalent to "git log".
During 2.36 release cycle, we started clearing the pathspec in
diff_free(), so programs like gitk that runs
git diff-tree --stdin -- <pathspec>
downstream of a pipe, processing one commit after another, started
showing irrelevant comparison outside the given <pathspec> from the
second commit. The same commit, by forgetting to teach the .no_free
mechanism, broke "diff-tree --stdin -I<regexp>" and nobody noticed
it for over a year, presumably because it is so seldom used an
option.
But <pathspec> is a different story. The breakage was very
prominently visible and was reported immediately after 2.36 was
released.
Fix this breakage by mimicking how "git log" utilizes the .no_free
member so that "diff-tree --stdin" behaves more similarly to "log".
Protect the fix with a few new tests.
Reported-by: Matthias Aßhauer <mha1993@live.de>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning directly from a local repository, we load a list of refs
based on scanning the $GIT_DIR/refs/ directory of the "server"
repository. If files exist in that directory that do not parse as
hexadecimal hashes, then the ref array used by write_remote_refs()
ends up with some entries with null OIDs. This causes us to hit a BUG()
statement in ref_transaction_create():
BUG: create called without valid new_oid
This BUG() call used to be a die() until 033abf97f (Replace all
die("BUG: ...") calls by BUG() ones, 2018-05-02). Before that, the die()
was added by f04c5b552 (ref_transaction_create(): check that new_sha1 is
valid, 2015-02-17).
The original report for this bug [1] mentioned that this problem did not
exist in Git 2.27.0. The failure bisects unsurprisingly to 968f12fda
(refs: turn on GIT_REF_PARANOIA by default, 2021-09-24). When
GIT_REF_PARANOIA is enabled, this case always fails as far back as I am
able to successfully compile and test the Git codebase.
[1] https://github.com/git-for-windows/git/issues/3781
There are two approaches to consider here. One would be to remove this
BUG() statement in favor of returning with an error. There are only two
callers to ref_transaction_create(), so this would have a limited
impact.
The other approach would be to add special casing in 'git clone' to
avoid this faulty input to the method.
While I originally started with changing 'git clone', I decided that
modifying ref_transaction_create() was a more complete solution. This
prevents failing with a BUG() statement when we already have a good way
to report an error (including a reason for that error) within the
method. Both callers properly check the return value and die() with the
error message, so this is an appropriate direction.
The added test helps check against a regression, but does check that our
intended error message is handled correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--since=<time>" option of "git log" limits the commits displayed by
the command by stopping the traversal once it sees a commit whose
timestamp is older than the given time and not digging further into its
parents.
This is OK in a history where a commit always has a newer timestamp than
any of its parents'. Once you see a commit older than the given <time>,
all ancestor commits of it are even older than the time anyway. It
poses, however, a problem when there is a commit with a wrong timestamp
that makes it appear older than its parents. Stopping traversal at the
"incorrectly old" commit will hide its ancestors that are newer than
that wrong commit and are newer than the cut-off time given with the
--since option. --max-age and --after being the synonyms to --since,
they share the same issue.
Add a new "--since-as-filter" option that is a variant of
"--since=<time>". Instead of stopping the traversal to hide an old
enough commit and its all ancestors, exclude commits with an old
timestamp from the output but still keep digging the history.
Without other traversal stopping options, this will force the command in
"git log" family to dig down the history to the root. It may be an
acceptable cost for a small project with short history and many commits
with screwy timestamps.
It is quite unlikely for us to add traversal stopper other than since,
so have this as a --since-as-filter option, rather than a separate
--as-filter, that would be probably more confusing.
Signed-off-by: Miklos Vajna <vmiklos@vmiklos.hu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--keep-base rebases onto the merge base of the given upstream and the
current HEAD regardless of whether a branch is given. This is contrary
to the documentation and to the option's intended purpose. Instead,
rebase onto the merge base of the given upstream and the given branch.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git uses temporary files to pass the contents of blobs to external diff
programs and textconv filters. It calls mks_tempfile_ts() to create
them, which puts them all in the same directory. This requires adding
a random name prefix.
Use mks_tempfile_dt() instead, which allows the files to have arbitrary
names, each in their own separate temporary directory. This way they
can have the same basename as the original blob, which looks nicer in
graphical diff programs.
The test in t4020 to check the prettiness of the temporary paths was
neutered by 5476bdf0e8 (diff tests: don't ignore "git diff" exit code in
"read" loop, 2022-03-07), which removed its grep check without replacing
it with an equivalent test_cmp check. Add one that only checks the
basename of the temporary file and nothing else.
And make the test more robust while at it, by using test_when_finished
to get rid of the added file even if the test fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 2a0cafd464,
as it expects a working "a ref deletion must produce a single
transaction, not one for loose and another for packed" topic,
which we do not have.
With the addition of the safe.directory in 8959555ce
(setup_git_directory(): add an owner check for the top-level directory,
2022-03-02) released in v2.35.2, we are receiving feedback from a
variety of users about the feature.
Some users have a very large list of shared repositories and find it
cumbersome to add this config for every one of them.
In a more difficult case, certain workflows involve running Git commands
within containers. The container boundary prevents any global or system
config from communicating `safe.directory` values from the host into the
container. Further, the container almost always runs as a different user
than the owner of the directory in the host.
To simplify the reactions necessary for these users, extend the
definition of the safe.directory config value to include a possible '*'
value. This value implies that all directories are safe, providing a
single setting to opt-out of this protection.
Note that an empty assignment of safe.directory clears all previous
values, and this is already the case with the "if (!value || !*value)"
condition.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that nothing is ever checking to make sure the safe directories
in the configs actually have the key safe.directory, so some unrelated
config that has a value with a certain directory would also make it a
safe directory.
Signed-off-by: Matheus Valadares <me@m28.io>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is difficult to change the ownership on a directory in our test
suite, so insert a new GIT_TEST_ASSUME_DIFFERENT_OWNER environment
variable to trick Git into thinking we are in a differently-owned
directory. This allows us to test that the config is parsed correctly.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_path_is_file() instead of 'test -f' for better debugging
information.
Signed-off-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the address sanitizer checks for a superset of the issues detected
by setting MALLOC_CHECK_ (which tries to detect things like double
frees and off-by-one errors) there is no need to set the latter when
compiling with -fsanitize=address.
This fixes a regression introduced by 131b94a10a ("test-lib.sh: Use
GLIBC_TUNABLES instead of MALLOC_CHECK_ on glibc >= 2.34", 2022-03-04)
which causes all the tests to fail with the message
ASan runtime does not come first in initial library list;
you should either link runtime to your application or
manually preload it with LD_PRELOAD.
when git is compiled with SANITIZE=address on systems with glibc >=
2.34. I have tested SANITIZE=leak and SANITIZE=undefined and they do
not suffer from this regression so the fix in this patch should be
sufficient.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>