"git log --decorate-refs-exclude=<pattern>" was incorrectly
overruled when the "--simplify-by-decoration" option is used, which
has been corrected.
* rs/simplify-by-deco-with-deco-refs-exclude:
log-tree: call load_ref_decorations() in get_name_decoration()
log: test --decorate-refs-exclude with --simplify-by-decoration
Load a default set of ref name decorations at the first lookup. This
frees direct and indirect callers from doing so. They can still do it
if they want to use a filter or are interested in full decorations
instead of the default short ones -- the first load_ref_decorations()
call wins.
This means that the load in builtin/log.c::cmd_log_init_finish() is
respected even if --simplify-by-decoration is given, as the previously
dominating earlier load in handle_revision_opt() is gone. So a filter
given with --decorate-refs-exclude is used for simplification in that
case, as expected.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Demonstrate that a decoration filter given with --decorate-refs-exclude
is inadvertently overruled by --simplify-by-decoration.
Reported-by: Étienne SERVAIS <etienne.servais@voucoux.fr>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision option parser recently learned about --end-of-options, but
that's not quite enough for all callers. Some of them, like git-log,
pick out some options using parse_options(), and then feed the remainder
to setup_revisions(). For those cases we need to stop parse_options()
from finding more options when it sees --end-of-options, and to retain
that option in argv so that setup_revisions() can see it as well.
Let's handle this the same as we do "--". We can even piggy-back on the
handling of PARSE_OPT_KEEP_DASHDASH, because any caller that wants to
retain one will want to retain the other.
I've included two tests here. The "log" test covers "--source", which is
one of the options it handles with parse_options(), and would fail
before this patch. There's also a test that uses the parse-options
helper directly. That confirms that the option is handled correctly even
in cases without KEEP_DASHDASH or setup_revisions(). I.e., it is safe to
use --end-of-options in place of "--" in other programs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed in [1] there's a regression in the "pu" branch now
because a new test implicitly assumed that a previous test guarded by
a prerequisite had been run. Add a "GIT_TEST_FAIL_PREREQS" special
test setup where we'll skip (nearly) all tests guarded by
prerequisites, allowing us to easily emulate those platform where we
don't run these tests.
As noted in the documentation I'm adding I'm whitelisting the SYMLINKS
prerequisite for now. A lot of tests started failing if we lied about
not supporting symlinks. It's also unlikely that we'll have a failing
test due to a hard dependency on symlinks without that being the
obvious cause, so for now it's not worth the effort to make it work.
1. https://public-inbox.org/git/nycvar.QRO.7.76.6.1905131531000.44@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Operations on promisor objects make sense in the context of only a
small subset of the commands that internally use the revisions
machinery, but the "--exclude-promisor-objects" option were taken
and led to nonsense results by commands like "log", to which it
didn't make much sense. This has been corrected.
* md/exclude-promisor-objects-fix:
exclude-promisor-objects: declare when option is allowed
Documentation/git-log.txt: do not show --exclude-promisor-objects
The --exclude-promisor-objects option causes some funny behavior in at
least two commands: log and blame. It causes a BUG crash:
$ git log --exclude-promisor-objects
BUG: revision.c:2143: exclude_promisor_objects can only be used
when fetch_if_missing is 0
Aborted
[134]
Fix this such that the option is treated like any other unknown option.
The commands that must support it are limited, so declare in those
commands that the flag is supported. In particular:
pack-objects
prune
rev-list
The commands were found by searching for logic which parses
--exclude-promisor-objects outside of revision.c. Extra logic outside of
revision.c is needed because fetch_if_missing must be turned on before
revision.c sees the option or it will BUG-crash. The above list is
supported by the fact that no other command is introspectively invoked
by another command passing --exclude-promisor-object.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change various tests that use an idiom of the form:
>expect &&
test_cmp expect actual
To instead use:
test_must_be_empty actual
The test_must_be_empty() wrapper was introduced in ca8d148daf ("test:
test_must_be_empty helper", 2013-06-09). Many of these tests have been
added after that time. This was mostly found with, and manually pruned
from:
git grep '^\s+>.*expect.* &&$' t
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add test cases to cover the new X509/gpgsm support. Most of them
resemble existing ones. They just switch the format to x509 and set the
signingkey when creating signatures. Validation of signatures does not
need any configuration of git, it does need gpgsm to be configured to
trust the key(-chain).
Several of the testcases build on top of existing gpg testcases.
The commit ships a self-signed key for committer@example.com and
configures gpgsm to trust it.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
The point of the test-terminal script is to simulate in the
test scripts an environment where output is going to a real
terminal.
But since test-lib.sh also sets TERM=dumb, the simulation
isn't very realistic. The color code will skip auto-coloring
for TERM=dumb, leading to us liberally sprinkling
test_terminal env TERM=vt100 git ...
through the test suite to convince the tests to actually
generate colors. Let's set TERM for programs run under
test_terminal, which is one less thing for test-writers to
remember.
In most cases the callers can be simplified, but note there
is one interesting case in t4202. It uses test_terminal to
check the auto-enabling of --decorate, but the expected
output _doesn't_ contain colors (because TERM=dumb
suppresses them). Using TERM=vt100 is closer to what the
real world looks like; adjust the expected output to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If revs->def is set (as it is in "git log") and there are no
pending objects after parsing the user's input, then we show
whatever is in "def". But if the user _did_ ask for some
input that just happened to be empty (e.g., "--glob" that
does not match anything), showing the default revision is
confusing. We should just show nothing, as that is what the
user's request yielded.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "perl-compatible regular expression" support to enable JIT
and also allow linking with the newer PCRE v2 library.
* ab/pcre-v2:
grep: add support for PCRE v2
grep: un-break building with PCRE >= 8.32 without --enable-jit
grep: un-break building with PCRE < 8.20
grep: un-break building with PCRE < 8.32
grep: add support for the PCRE v1 JIT API
log: add -P as a synonym for --perl-regexp
grep: skip pthreads overhead when using one thread
grep: don't redundantly compile throwaway patterns under threading
The internal implementation of "git grep" has seen some clean-up.
* ab/grep-preparatory-cleanup: (31 commits)
grep: assert that threading is enabled when calling grep_{lock,unlock}
grep: given --threads with NO_PTHREADS=YesPlease, warn
pack-objects: fix buggy warning about threads
pack-objects & index-pack: add test for --threads warning
test-lib: add a PTHREADS prerequisite
grep: move is_fixed() earlier to avoid forward declaration
grep: change internal *pcre* variable & function names to be *pcre1*
grep: change the internal PCRE macro names to be PCRE1
grep: factor test for \0 in grep patterns into a function
grep: remove redundant regflags assignments
grep: catch a missing enum in switch statement
perf: add a comparison test of log --grep regex engines with -F
perf: add a comparison test of log --grep regex engines
perf: add a comparison test of grep regex engines with -F
perf: add a comparison test of grep regex engines
perf: emit progress output when unpacking & building
perf: add a GIT_PERF_MAKE_COMMAND for when *_MAKE_OPTS won't do
grep: add tests to fix blind spots with \0 patterns
grep: prepare for testing binary regexes containing rx metacharacters
grep: add a test helper function for less verbose -f \0 tests
...
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
"git describe --contains" penalized light-weight tags so much that
they were almost never considered. Instead, give them about the
same chance to be considered as an annotated tag that is the same
age as the underlying commit would.
* jc/name-rev-lw-tag:
name-rev: favor describing with tags and use committer date to tiebreak
name-rev: refactor logic to see if a new candidate is a better name
Add a short -P option as a synonym for the longer --perl-regexp, for
consistency with the options the corresponding grep invocations
accept.
This was intentionally omitted in commit 727b6fc3ed ("log --grep:
accept --basic-regexp and --perl-regexp", 2012-10-03) for unspecified
future use.
Make it consistent with "grep" rather than to keep it open for future
use, and to avoid the confusion of -P meaning different things for
grep & log, as is the case with the -G option.
As noted in the aforementioned commit the --basic-regexp option can't
have a corresponding -G argument, as the log command already uses that
for -G<regex>.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a range like "a..b", we write a
temporary NUL over the first ".", so that we can access the
names "a" and "b" as C strings. But our restoration of the
original "." is done at inconsistent times, which can lead
to confusing results.
For most calls, we restore the "." after we resolve the
names, but before we call verify_non_filename(). This means
that when we later call add_pending_object(), the name for
the left-hand "a" has been re-expanded to "a..b". You can
see this with:
git log --source a...b
where "b" will be correctly marked with "b", but "a" will be
marked with "a...b". Likewise with "a..b" (though you need
to use --boundary to even see "a" at all in that case).
To top off the confusion, when the REVARG_CANNOT_BE_FILENAME
flag is set, we skip the non-filename check, and leave the
NUL in place.
That means we do report the correct name for "a" in the
pending array. But some code paths try to show the whole
"a...b" name in error messages, and these erroneously show
only "a" instead of "a...b". E.g.:
$ git cherry-pick HEAD:foo...HEAD:foo
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
fatal: Invalid symmetric difference expression HEAD:foo
(That last message should be "HEAD:foo...HEAD:foo"; I used
cherry-pick because it passes the CANNOT_BE_FILENAME flag).
As an interesting side note, cherry-pick actually looks at
and re-resolves the arguments from the pending->name fields.
So it would have been visibly broken by the first bug, but
the effect was canceled out by the second one.
This patch makes the whole function consistent by re-writing
the NUL immediately after calling verify_non_filename(), and
then restoring the "." as appropriate in some error-printing
and early-return code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test asserting that when --perl-regexp (and -P for grep) is
given to git-grep & git-log that we die with an error.
In developing the PCRE v2 series I introduced a regression where -P
would (through control-flow fall-through) become synonymous with basic
POSIX matching. I.e. 'git grep -P '[\d]' would match "d" instead of
digits.
The entire test suite would still pass with this serious regression,
since everything that tested for --perl-regexp would be guarded by the
PCRE prerequisite, fix that blind-spot by adding tests under !PCRE
asserting that git must die when given --perl-regexp or -P.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the --regexp-ignore-case option work with --perl-regexp. This
never worked, and there was no test for this. Fix the bug and add a
test.
When PCRE support was added in commit 63e7e9d8b6 ("git-grep: Learn
PCRE", 2011-05-09) compile_pcre_regexp() would only check
opt->ignore_case, but when the --perl-regexp option was added in
commit 727b6fc3ed ("log --grep: accept --basic-regexp and
--perl-regexp", 2012-10-03) the code didn't set the opt->ignore_case.
Change the test suite to test for -i and --invert-regexp with
basic/extended/perl patterns in addition to fixed, which was the only
patternType that was tested for before in combination with those
options.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add exhaustive tests for how the different grep.patternType options &
the corresponding command-line options affect git-log.
Before this change it was possible to patch revision.c so that the
--basic-regexp option was synonymous with --extended-regexp, and
--perl-regexp wasn't recognized at all, and still have 100% of the
test suite pass.
This was because the first test being modified here, added in commit
34a4ae55b2 ("log --grep: use the same helper to set -E/-F options as
"git grep"", 2012-10-03), didn't actually check whether we'd enabled
extended regular expressions as distinct from re-toggling non-fixed
string support.
Fix that by changing the pattern to a pattern that'll only match if
--extended-regexp option is provided, but won't match under the
default --basic-regexp option.
Other potential regressions were possible since there were no tests
for the rest of the combinations of grep.patternType configuration
toggles & corresponding git-log command-line options. Add exhaustive
tests for those.
The patterns being passed to fixed/basic/extended/PCRE are carefully
crafted to return the wrong thing if the grep engine were to pick any
other matching method than the one it's told to use.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent change that introduced autodecorating of refs accidentally
broke the ability of users to set log.decorate = false to override it.
When the git_log_config was traversed a second time with an option other
than log.decorate, the decoration style would be set to the automatic
style, even if the user had already overridden it. Instead of setting
the option in config parsing, set it in init_log_defaults instead.
Add a test for this case. The actual additional config option doesn't
matter, but it needs to be something not already set in the
configuration file.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git name-rev" assigned a phony "far in the future" date to tips of
refs that are not pointing at tag objects, and favored names based
on a ref with the oldest date. This made it almost impossible for
an unannotated tags and branches to be counted as a viable base,
which was especially problematic when the command is run with the
"--tags" option. If an unannotated tag that points at an ancient
commit and an annotated tag that points at a much newer commit
reaches the commit that is being named, the old unannotated tag was
ignored.
Update the "taggerdate" field of the rev-name structure, which is
initialized from the tip of ref, to have the committer date if the
object at the tip of ref is a commit, not a tag, so that we can
optionally take it into account when doing "is this name better?"
comparison logic.
When "name-rev" is run without the "--tags" option, the general
expectation is still to name the commit based on a tag if possible,
but use non-tag refs as fallback, and tiebreak among these non-tag
refs by favoring names with shorter hops from the tip. The use of a
phony "far in the future" date in the original code was an effective
way to ensure this expectation is held: a non-tag tip gets the same
"far in the future" timestamp, giving precedence to tags, and among
non-tag tips, names with shorter hops are preferred over longer
hops, without taking the "taggerdate" into account. As we are
taking over the "taggerdate" field to store the committer date for
tips with commits:
(1) keep the original logic when comparing names based on two refs
both of which are from refs/tags/;
(2) favoring a name based on a ref in refs/tags/ hierarchy over
a ref outside the hierarchy;
(3) between two names based on a ref both outside refs/tags/, give
precedence to a name with shorter hops and use "taggerdate"
only to tie-break.
A change to t4202 is a natural consequence. The test creates a
commit on a branch "side" and points at it with an unannotated tag
"refs/tags/side-2". The original code couldn't decide which one to
favor at all, and gave a name based on a branch (simply because
refs/heads/side sorts earlier than refs/tags/side-2). Because the
updated logic is taught to favor refs in refs/tags/ hierarchy, the
the test is updated to expect to see tags/side-2 instead.
[mjg: open-coded the comparisons in is_better_name(), dropping a
helper macro used in the original]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --graph" did not work well with "--name-only", even though
other forms of "diff" output were handled correctly.
* jk/log-graph-name-only:
diff: print line prefix for --name-only output
If you run "git log --graph --name-only", the pathnames are
not indented to go along with their matching commits (unlike
all of the other diff formats). We need to output the line
prefix for each item before writing it.
The tests cover both --name-status and --name-only. The
former actually gets this right already, because it builds
on the --raw format functions. It's only --name-only which
uses its own code (and this fix mirrors the code in
diff_flush_raw()).
Note that the tests don't follow our usual style of setting
up the "expect" output inside the test block. This matches
the surrounding style, but more importantly it is easier to
read: we don't have to worry about embedded single-quotes,
and the leading indentation is more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people feel the default set of colors used by "git log --graph"
rather limiting. A mechanism to customize the set of colors has
been introduced.
* nd/log-graph-configurable-colors:
document behavior of empty color name
color_parse_mem: allow empty color spec
log --graph: customize the graph lines with config log.graphColors
color.c: trim leading spaces in color_parse_mem()
color.c: fix color_parse_mem() with value_len == 0
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a 256 colors terminal (or one with true color support), then
the predefined 12 colors seem limited. On the other hand, you don't want
to draw graph lines with every single color in this mode because the two
colors could look extremely similar. This option allows you to hand pick
the colors you want.
Even with standard terminal, if your background color is neither black
or white, then the graph line may match your background and become
hidden. You can exclude your background color (or simply the colors you
hate) with this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
"git -c grep.patternType=extended log --basic-regexp" misbehaved
because the internal API to access the grep machinery was not
designed well.
* jc/grep-commandline-vs-configuration:
grep: further simplify setting the pattern type
When c5c31d33 (grep: move pattern-type bits support to top-level
grep.[ch], 2012-10-03) introduced grep_commit_pattern_type() helper
function, the intention was to allow the users of grep API to having
to fiddle only with .pattern_type_option (which can be set to "fixed",
"basic", "extended", and "pcre"), and then immediately before compiling
the pattern strings for use, call grep_commit_pattern_type() to have
it prepare various bits in the grep_opt structure (like .fixed,
.regflags, etc.).
However, grep_set_pattern_type_option() helper function the grep API
internally uses were left as an external function by mistake. This
function shouldn't have been made callable by the users of the API.
Later when the grep API was used in revision traversal machinery,
the caller then mistakenly started calling the function around
34a4ae55 (log --grep: use the same helper to set -E/-F options as
"git grep", 2012-10-03), instead of setting the .pattern_type_option
field and letting the grep_commit_pattern_type() to take care of the
details.
This caused an unnecessary bug that made a configured
grep.patternType take precedence over the command line options
(e.g. --basic-regexp, --fixed-strings) in "git log" family of
commands.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may want to always use "--show-signature" while using git-log and
related commands.
When log.showSignature is set to true, git-log and related commands will
behave as if "--show-signature" was given to them.
Note that this config variable is meant to affect git-log, git-show,
git-whatchanged and git-reflog. Other commands like git-format-patch,
git-rev-list are not to be affected by this config variable.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If an user creates an alias with "--show-signature" early in command
line, e.g.
[alias] logss = log --show-signature
then there is no way to countermand it through command line.
Teach git-log and related commands about "--no-show-signature" command
line option. This will make "git logss --no-show-signature" run
without showing GPG signature.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subsequent patches will want to reuse the 'signed' branch that the
'log --graph --show-signature' test creates and uses.
Split the set-up part into a test of its own, and make the existing
test into a separate one that only inspects the history on the 'signed'
branch. This way, it becomes clearer that tests added by subsequent
patches reuse the 'signed' branch in the same way.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename detection is a very convenient feature, and new users shouldn't
have to dig in the documentation to benefit from it.
Potential objections to activating rename detection are that it
sometimes fail, and it is sometimes slow. But rename detection is
already activated by default in several cases like "git status" and "git
merge", so activating diff.renames does not fundamentally change the
situation. When the rename detection fails, it now fails consistently
between "git diff" and "git status".
This setting does not affect plumbing commands, hence well-written
scripts will not be affected.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History traversal with "git log --source" that starts with an
annotated tag failed to report the tag as "source", due to an
old regression in the command line parser back in v2.2 days.
* jk/pending-keep-tag-name:
revision.c: propagate tag names from pending array
When we unwrap a tag to find its commit for a traversal, we
do not propagate the "name" field of the tag in the pending
array (i.e., the ref name the user gave us in the first
place) to the commit (instead, we use an empty string). This
means that "git log --source" will never show the tag-name
for commits we reach through it.
This was broken in 2073949 (traverse_commit_list: support
pending blobs/trees with paths, 2014-10-15). That commit
tried to be careful and avoid propagating the path
information for a tag (which would be nonsensical) to trees
and blobs. But it should not have cut off the "name" field,
which should carry forward to children.
Note that this does mean that the "name" field will carry
forward to blobs and trees, too. Whereas prior to 2073949,
we always gave them an empty string. This is the right thing
to do, but in practice no callers probably use it (since now
we have an explicit separate "path" field, which was the
point of 2073949).
We add tests here not only for the broken case, but also a
basic sanity test of "log --source" in general, which did
not have any coverage in the test suite.
Reported-by: Raymundo <gypark@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git init empty && git -C empty log" said "bad default revision 'HEAD'",
which was found to be a bit confusing to new users.
* jk/log-missing-default-HEAD:
log: diagnose empty HEAD more clearly
If you init or clone an empty repository, the initial
message from running "git log" is not very friendly:
$ git init
Initialized empty Git repository in /home/peff/foo/.git/
$ git log
fatal: bad default revision 'HEAD'
Let's detect this situation and write a more friendly
message:
$ git log
fatal: your current branch 'master' does not have any commits yet
We also detect the case that 'HEAD' points to a broken ref;
this should be even less common, but is easy to see. Note
that we do not diagnose all possible cases. We rely on
resolve_ref, which means we do not get information about
complex cases. E.g., "--default master" would use dwim_ref
to find "refs/heads/master", but we notice only that
"master" does not exist. Similarly, a complex sha1
expression like "--default HEAD^2" will not resolve as a
ref.
But that's OK. We fall back to a generic error message in
those cases, and they are unlikely to be used anyway.
Catching an empty or broken "HEAD" improves the common case,
and the other cases are not regressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People often forget to chain the commands in their test together
with &&, leaving a failure from an earlier command in the test go
unnoticed. The new GIT_TEST_CHAIN_LINT mechanism allows you to
catch such a mistake more easily.
* jk/test-chain-lint: (36 commits)
t9001: drop save_confirm helper
t0020: use test_* helpers instead of hand-rolled messages
t: simplify loop exit-code status variables
t: fix some trivial cases of ignored exit codes in loops
t7701: fix ignored exit code inside loop
t3305: fix ignored exit code inside loop
t0020: fix ignored exit code inside loops
perf-lib: fix ignored exit code inside loop
t6039: fix broken && chain
t9158, t9161: fix broken &&-chain in git-svn tests
t9104: fix test for following larger parents
t4104: drop hand-rolled error reporting
t0005: fix broken &&-chains
t7004: fix embedded single-quotes
t0050: appease --chain-lint
t9001: use test_when_finished
t4117: use modern test_* helpers
t6034: use modern test_* helpers
t1301: use modern test_* helpers
t0020: use modern test_* helpers
...
"git log --graph --no-walk A B..." is a otcnflicting request that
asks nonsense; no-walk tells us show discrete points in the
history, while graph asks to draw connections between these
discrete points. Forbid the combination.
* dj/log-graph-with-no-walk:
revision: forbid combining --graph and --no-walk
Many tests that predate the "verbose" helper function use a
pattern like:
test ... || {
echo ...
false
}
to give more verbose output. Using the helper, we can do
this with a single line, and avoid a || which interacts
badly with &&-chaining (besides fooling --chain-lint, we hit
the error block no matter which command in the chain failed,
so we may often show useless results).
In most cases, the messages printed by "verbose" are equally
good (in some cases better; t6006 accidentally redirects the
message to a file!). The exception is t7001, whose output
suffers slightly. However, it's still enough to show the
user which part failed, given that we will have just printed
the test script to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because "--graph" is about connected history while --no-walk is
about discrete points, it does not make sense to allow these two
options at the same time. [1]
This change makes a few calls to "show --graph" fail in t4052, but
asking to show one commit with graph is a nonsensical thing to do.
Thus, tests on "show --graph" in t4052 have been removed [2,3].
Same tests on "show" without --graph option have already been tested
in 4052.
3 testcases have been added to test this patch.
[1]: http://article.gmane.org/gmane.comp.version-control.git/216083
[2]: http://article.gmane.org/gmane.comp.version-control.git/264950
[3]: http://article.gmane.org/gmane.comp.version-control.git/265107
Helped-By: Eric Sunshine <sunshine@sunshineco.com>
Helped-By: René Scharfe <l.s.r@web.de>
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Dongcan Jiang <dongcan.jiang@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --grep=<string>" shows only commits with messages that
match the given string, but sometimes it is useful to be able to
show only commits that do *not* have certain messages (e.g. "show
me ones that are not FIXUP commits").
Originally, we had the invert-grep flag in grep_opt, but because
"git grep --invert-grep" does not make sense except in conjunction
with "--files-with-matches", which is already covered by
"--files-without-matches", it was moved it to revisions structure.
To have the flag there expresses the function to the feature better.
When the newly inserted two tests run, the history would have commits
with messages "initial", "second", "third", "fourth", "fifth", "sixth"
and "Second", committed in this order. The commits that does not match
either "th" or "Sec" is "second" and "initial". For the case insensitive
case only "initial" matches.
Signed-off-by: Christoph Junghans <ottxor@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
