The git-repack command always passes `--honor-pack-keep`
to pack-objects. This has traditionally been a good thing,
as we do not want to duplicate those objects in a new pack,
and we are not going to delete the old pack.
However, when bitmaps are in use, it is important for a full
repack to include all reachable objects, even if they may be
duplicated in a .keep pack. Otherwise, we cannot generate
the bitmaps, as the on-disk format requires the set of
objects in the pack to be fully closed.
Even if the repository does not generally have .keep files,
a simultaneous push could cause a race condition in which a
.keep file exists at the moment of a repack. The repack may
try to include those objects in one of two situations:
1. The pushed .keep pack contains objects that were
already in the repository (e.g., blobs due to a revert of
an old commit).
2. Receive-pack updates the refs, making the objects
reachable, but before it removes the .keep file, the
repack runs.
In either case, we may prefer to duplicate some objects in
the new, full pack, and let the next repack (after the .keep
file is cleaned up) take care of removing them.
This patch introduces both a command-line and config option
to disable the `--honor-pack-keep` option. By default, it
is triggered when pack.writeBitmaps (or `--write-bitmap-index`
is turned on), but specifying it explicitly can override the
behavior (e.g., in cases where you prefer .keep files to
bitmaps, but only when they are present).
Note that this option just disables the pack-objects
behavior. We still leave packs with a .keep in place, as we
do not necessarily know that we have duplicated all of their
objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since `pack-objects` will write a `.bitmap` file next to the `.pack` and
`.idx` files, this commit teaches `git-repack` to consider the new
bitmap indexes (if they exist) when performing repack operations.
This implies moving old bitmap indexes out of the way if we are
repacking a repository that already has them, and moving the newly
generated bitmap indexes into the `objects/pack` directory, next to
their corresponding packfiles.
Since `git repack` is now capable of handling these `.bitmap` files,
a normal `git gc` run on a repository that has `pack.writebitmaps` set
to true in its config file will generate bitmap indexes as part of the
garbage collection process.
Alternatively, `git repack` can be called with the `-b` switch to
explicitly generate bitmap indexes if you are experimenting
and don't want them on all the time.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We ask pack-objects to pack to a set of temporary files, and
then rename them into place. Some files that pack-objects
creates may be optional (like a .bitmap file), in which case
we would not want to call rename(). We already call stat()
and make the chmod optional if the file cannot be accessed.
We could simply skip the rename step in this case, but that
would be a minor regression in noticing problems with
non-optional files (like the .pack and .idx files).
Instead, we can now annotate extensions as optional, and
skip them if they don't exist (and otherwise rely on
rename() to barf).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is slightly more verbose, but will let us annotate the
extensions with further options in future commits.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a static array of extensions, but hardcode the size
of the array in our loops. Let's pull out this magic number,
which will make it easier to change.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit extends more the functionality of `pack-objects` by allowing
it to write out a `.bitmap` index next to any written packs, together
with the `.idx` index that currently gets written.
If bitmap writing is enabled for a given repository (either by calling
`pack-objects` with the `--write-bitmap-index` flag or by having
`pack.writebitmaps` set to `true` in the config) and pack-objects is
writing a packfile that would normally be indexed (i.e. not piping to
stdout), we will attempt to write the corresponding bitmap index for the
packfile.
Bitmap index writing happens after the packfile and its index has been
successfully written to disk (`finish_tmp_packfile`). The process is
performed in several steps:
1. `bitmap_writer_set_checksum`: this call stores the partial
checksum for the packfile being written; the checksum will be
written in the resulting bitmap index to verify its integrity
2. `bitmap_writer_build_type_index`: this call uses the array of
`struct object_entry` that has just been sorted when writing out
the actual packfile index to disk to generate 4 type-index bitmaps
(one for each object type).
These bitmaps have their nth bit set if the given object is of
the bitmap's type. E.g. the nth bit of the Commits bitmap will be
1 if the nth object in the packfile index is a commit.
This is a very cheap operation because the bitmap writing code has
access to the metadata stored in the `struct object_entry` array,
and hence the real type for each object in the packfile.
3. `bitmap_writer_reuse_bitmaps`: if there exists an existing bitmap
index for one of the packfiles we're trying to repack, this call
will efficiently rebuild the existing bitmaps so they can be
reused on the new index. All the existing bitmaps will be stored
in a `reuse` hash table, and the commit selection phase will
prioritize these when selecting, as they can be written directly
to the new index without having to perform a revision walk to
fill the bitmap. This can greatly speed up the repack of a
repository that already has bitmaps.
4. `bitmap_writer_select_commits`: if bitmap writing is enabled for
a given `pack-objects` run, the sequence of commits generated
during the Counting Objects phase will be stored in an array.
We then use that array to build up the list of selected commits.
Writing a bitmap in the index for each object in the repository
would be cost-prohibitive, so we use a simple heuristic to pick
the commits that will be indexed with bitmaps.
The current heuristics are a simplified version of JGit's
original implementation. We select a higher density of commits
depending on their age: the 100 most recent commits are always
selected, after that we pick 1 commit of each 100, and the gap
increases as the commits grow older. On top of that, we make sure
that every single branch that has not been merged (all the tips
that would be required from a clone) gets their own bitmap, and
when selecting commits between a gap, we tend to prioritize the
commit with the most parents.
Do note that there is no right/wrong way to perform commit
selection; different selection algorithms will result in
different commits being selected, but there's no such thing as
"missing a commit". The bitmap walker algorithm implemented in
`prepare_bitmap_walk` is able to adapt to missing bitmaps by
performing manual walks that complete the bitmap: the ideal
selection algorithm, however, would select the commits that are
more likely to be used as roots for a walk in the future (e.g.
the tips of each branch, and so on) to ensure a bitmap for them
is always available.
5. `bitmap_writer_build`: this is the computationally expensive part
of bitmap generation. Based on the list of commits that were
selected in the previous step, we perform several incremental
walks to generate the bitmap for each commit.
The walks begin from the oldest commit, and are built up
incrementally for each branch. E.g. consider this dag where A, B,
C, D, E, F are the selected commits, and a, b, c, e are a chunk
of simplified history that will not receive bitmaps.
A---a---B--b--C--c--D
\
E--e--F
We start by building the bitmap for A, using A as the root for a
revision walk and marking all the objects that are reachable
until the walk is over. Once this bitmap is stored, we reuse the
bitmap walker to perform the walk for B, assuming that once we
reach A again, the walk will be terminated because A has already
been SEEN on the previous walk.
This process is repeated for C, and D, but when we try to
generate the bitmaps for E, we can reuse neither the current walk
nor the bitmap we have generated so far.
What we do now is resetting both the walk and clearing the
bitmap, and performing the walk from scratch using E as the
origin. This new walk, however, does not need to be completed.
Once we hit B, we can lookup the bitmap we have already stored
for that commit and OR it with the existing bitmap we've composed
so far, allowing us to limit the walk early.
After all the bitmaps have been generated, another iteration
through the list of commits is performed to find the best XOR
offsets for compression before writing them to disk. Because of
the incremental nature of these bitmaps, XORing one of them with
its predecesor results in a minimal "bitmap delta" most of the
time. We can write this delta to the on-disk bitmap index, and
then re-compose the original bitmaps by XORing them again when
loaded.
This is a phase very similar to pack-object's `find_delta` (using
bitmaps instead of objects, of course), except the heuristics
have been greatly simplified: we only check the 10 bitmaps before
any given one to find best compressing one. This gives good
results in practice, because there is locality in the ordering of
the objects (and therefore bitmaps) in the packfile.
6. `bitmap_writer_finish`: the last step in the process is
serializing to disk all the bitmap data that has been generated
in the two previous steps.
The bitmap is written to a tmp file and then moved atomically to
its final destination, using the same process as
`pack-write.c:write_idx_file`.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bitmap reachability index used to speed up the counting objects
phase during `pack-objects` can also be used to optimize a normal
rev-list if the only thing required are the SHA1s of the objects during
the list (i.e., not the path names at which trees and blobs were found).
Calling `git rev-list --objects --use-bitmap-index [committish]` will
perform an object iteration based on a bitmap result instead of actually
walking the object graph.
These are some example timings for `torvalds/linux` (warm cache,
best-of-five):
$ time git rev-list --objects master > /dev/null
real 0m34.191s
user 0m33.904s
sys 0m0.268s
$ time git rev-list --objects --use-bitmap-index master > /dev/null
real 0m1.041s
user 0m0.976s
sys 0m0.064s
Likewise, using `git rev-list --count --use-bitmap-index` will speed up
the counting operation by building the resulting bitmap and performing a
fast popcount (number of bits set on the bitmap) on the result.
Here are some sample timings of different ways to count commits in
`torvalds/linux`:
$ time git rev-list master | wc -l
399882
real 0m6.524s
user 0m6.060s
sys 0m3.284s
$ time git rev-list --count master
399882
real 0m4.318s
user 0m4.236s
sys 0m0.076s
$ time git rev-list --use-bitmap-index --count master
399882
real 0m0.217s
user 0m0.176s
sys 0m0.040s
This also respects negative refs, so you can use it to count
a slice of history:
$ time git rev-list --count v3.0..master
144843
real 0m1.971s
user 0m1.932s
sys 0m0.036s
$ time git rev-list --use-bitmap-index --count v3.0..master
real 0m0.280s
user 0m0.220s
sys 0m0.056s
Though note that the closer the endpoints, the less it helps. In the
traversal case, we have fewer commits to cross, so we take less time.
But the bitmap time is dominated by generating the pack revindex, which
is constant with respect to the refs given.
Note that you cannot yet get a fast --left-right count of a symmetric
difference (e.g., "--count --left-right master...topic"). The slow part
of that walk actually happens during the merge-base determination when
we parse "master...topic". Even though a count does not actually need to
know the real merge base (it only needs to take the symmetric difference
of the bitmaps), the revision code would require some refactoring to
handle this case.
Additionally, a `--test-bitmap` flag has been added that will perform
the same rev-list manually (i.e. using a normal revwalk) and using
bitmaps, and verify that the results are the same. This can be used to
exercise the bitmap code, and also to verify that the contents of the
.bitmap file are sane.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this patch, we use the bitmap API to perform the `Counting Objects`
phase in pack-objects, rather than a traditional walk through the object
graph. For a reasonably-packed large repo, the time to fetch and clone
is often dominated by the full-object revision walk during the Counting
Objects phase. Using bitmaps can reduce the CPU time required on the
server (and therefore start sending the actual pack data with less
delay).
For bitmaps to be used, the following must be true:
1. We must be packing to stdout (as a normal `pack-objects` from
`upload-pack` would do).
2. There must be a .bitmap index containing at least one of the
"have" objects that the client is asking for.
3. Bitmaps must be enabled (they are enabled by default, but can be
disabled by setting `pack.usebitmaps` to false, or by using
`--no-use-bitmap-index` on the command-line).
If any of these is not true, we fall back to doing a normal walk of the
object graph.
Here are some sample timings from a full pack of `torvalds/linux` (i.e.
something very similar to what would be generated for a clone of the
repository) that show the speedup produced by various
methods:
[existing graph traversal]
$ time git pack-objects --all --stdout --no-use-bitmap-index \
</dev/null >/dev/null
Counting objects: 3237103, done.
Compressing objects: 100% (508752/508752), done.
Total 3237103 (delta 2699584), reused 3237103 (delta 2699584)
real 0m44.111s
user 0m42.396s
sys 0m3.544s
[bitmaps only, without partial pack reuse; note that
pack reuse is automatic, so timing this required a
patch to disable it]
$ time git pack-objects --all --stdout </dev/null >/dev/null
Counting objects: 3237103, done.
Compressing objects: 100% (508752/508752), done.
Total 3237103 (delta 2699584), reused 3237103 (delta 2699584)
real 0m5.413s
user 0m5.604s
sys 0m1.804s
[bitmaps with pack reuse (what you get with this patch)]
$ time git pack-objects --all --stdout </dev/null >/dev/null
Reusing existing pack: 3237103, done.
Total 3237103 (delta 0), reused 0 (delta 0)
real 0m1.636s
user 0m1.460s
sys 0m0.172s
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function actually does three things:
1. Check whether we've already added the object to our
packing list.
2. Check whether the object meets our criteria for adding.
3. Actually add the object to our packing list.
It's a little hard to see these three phases, because they
happen linearly in the rather long function. Instead, this
patch breaks them up into three separate helper functions.
The result is a little easier to follow, though it
unfortunately suffers from some optimization
interdependencies between the stages (e.g., during step 3 we
use the packing list index from step 1 and the packfile
information from step 2).
More importantly, though, the various parts can be
composed differently, as they will be in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the pack-objects system grows beyond the single
pack-objects.c file, more parts (like the soon-to-exist
bitmap code) will need to compute hashes for matching
deltas. Factor out name_hash to make it available to other
files.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hash table that stores the packing list for a given `pack-objects`
run was tightly coupled to the pack-objects code.
In this commit, we refactor the hash table and the underlying storage
array into a `packing_data` struct. The functionality for accessing and
adding entries to the packing list is hence accessible from other parts
of Git besides the `pack-objects` builtin.
This refactoring is a requirement for further patches in this series
that will require accessing the commit packing list from outside of
`pack-objects`.
The hash table implementation has been minimally altered: we now
use table sizes which are always a power of two, to ensure a uniform
index distribution in the array.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick" without further options would segfault.
Could use a follow-up to handle '-' after argv[1] better.
* hu/cherry-pick-previous-branch:
cherry-pick: handle "-" after parsing options
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
Rewrite "git repack" in C.
* sb/repack-in-c:
repack: improve warnings about failure of renaming and removing files
repack: retain the return value of pack-objects
repack: rewrite the shell script in C
Some progress and diagnostic messages from "git clone" were
incorrectly sent to the standard output stream, not to the standard
error stream.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
Since 920b691 (clone: refuse to clone if --branch
points to bogus ref) we refuse to clone with option
"-b" if the specified branch does not exist in the
(non-empty) upstream. If the upstream repository is empty,
the branch doesn't exist, either. So refuse the clone too.
Reported-by: Robert Mitwicki <robert.mitwicki@opensoftware.pl>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Currently, we only try converting argv[1] from "-" into "@{-1}". This
means we do not notice "-" when used together with an option. Worse,
when "git cherry-pick" is run with no options, we segfault. Fix this
by doing the substitution after we have checked that there is
something in argv to cherry-pick and know any remaining options are
meant for the revision-listing machinery.
This still does not handle "-" after the first non-cherry-pick option.
For example,
git cherry-pick foo~2 - bar~5
and
git cherry-pick --no-merges -
will still dump usage.
Reported-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Document --auto and --delete alongside their short forms -a and -d in
the first line of 'git remote set-head -h' output.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
* cc/replace-with-the-same-type:
Doc: 'replace' merge and non-merge commits
t6050-replace: use some long option names
replace: allow long option names
Documentation/replace: add Creating Replacement Objects section
t6050-replace: add test to clean up all the replace refs
t6050-replace: test that objects are of the same type
Documentation/replace: state that objects must be of the same type
replace: forbid replacing an object with one of a different type
We have a period in other places after "done" (see e.g. clone_local), so
we should have one here, too.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
"git check-ignore" follows the same rule as "git add" and "git
status" in that the ignore/exclude mechanism does not take effect
on paths that are already tracked. With "--no-index" option, it
can be used to diagnose which paths that should have been ignored
have been mistakenly added to the index.
* dw/check-ignore-sans-index:
check-ignore: Add option to ignore index contents
From the commit log template, remove irrelevant "advice" messages
that are shared with "git status" output.
* mm/commit-template-squelch-advice-messages:
commit: disable status hints when writing to COMMIT_EDITMSG
wt-status: turn advice_status_hints into a field of wt_status
commit: factor status configuration is a helper function
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
Just like "git checkout -" knows to check out and "git merge -"
knows to merge the branch you were previously on, "git cherry-pick"
now understands "git cherry-pick -" to pick from the previous
branch.
* hu/cherry-pick-previous-branch:
cherry-pick: allow "-" as abbreviation of '@{-1}'
"git status" now omits the prefix to make its output a comment in a
commit log editor, which is not necessary for human consumption.
We may want to tighten the output to omit unnecessary trailing blank
lines, but that does not have to be in the scope of this series.
* mm/status-without-comment-char:
t7508: avoid non-portable sed expression
status: add missing blank line after list of "other" files
tests: don't set status.displayCommentPrefix file-wide
status: disable display of '#' comment prefix by default
submodule summary: ignore --for-status option
wt-status: use argv_array API
builtin/stripspace.c: fix broken indentation
"git branch -v -v" (and "git status") did not distinguish among a
branch that does not build on any other branch, a branch that is in
sync with the branch it builds on, and a branch that is configured
to build on some other branch that no longer exists.
* jx/branch-vv-always-compare-with-upstream:
status: always show tracking branch even no change
branch: report invalid tracking branch as gone
When there is no sufficient overlap between old and new history
during a fetch into a shallow repository, we unnecessarily sent
objects the sending side knows the receiving end has.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
Most of git's traversals are robust against minor breakages
in commit data. For example, "git log" will still output an
entry for a commit that has a broken encoding or missing
author, and will not abort the whole operation.
Shortlog, on the other hand, will die as soon as it sees a
commit without an author, meaning that a repository with
a broken commit cannot get any shortlog output at all.
Let's downgrade this fatal error to a warning, and continue
the operation.
We simply ignore the commit and do not count it in the total
(since we do not have any author under which to file it).
Alternatively, we could output some kind of "<empty>" record
to collect these bogus commits. It is probably not worth it,
though; we have already warned to stderr, so the user is
aware that such bogosities exist, and any placeholder we
came up with would either be syntactically invalid, or would
potentially conflict with real data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A clone will always create a transport struct, whether we
are cloning locally or using an actual protocol. In the
local case, we only use the transport to get the list of
refs, and then transfer the objects out-of-band.
However, there are many options that we do not bother
setting up in the local case. For the most part, these are
noops, because they only affect the object-fetching stage
(e.g., the --depth option). However, some options do have a
visible impact. For example, giving the path to upload-pack
via "-u" does not currently work for a local clone, even
though we need upload-pack to get the ref list.
We can just drop the conditional entirely and set these
options for both local and non-local clones. Rather than
keep track of which options impact the object versus the ref
fetching stage, we can simply let the noops be noops (and
the cost of setting the options in the first place is not
high).
The one exception is that we also check that the transport
provides both a "get_refs_list" and a "fetch" method. We
will now be checking the former for both cases (which is
good, since a transport that cannot fetch refs would not
work for a local clone), and we tweak the conditional to
check for a "fetch" only when we are non-local.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stderr does not point to a tty, we typically suppress
"we are now in this phase" progress reporting (e.g., we ask
the server not to send us "counting objects" and the like).
The new "checking connectivity" message is in the same vein,
and should be suppressed. Since clone relies on the
transport code to make the decision, we can simply sneak a
peek at the "progress" field of the transport struct. That
properly takes into account both the verbosity and progress
options we were given, as well as the result of isatty().
Note that we do not set up that progress flag for a local
clone, as we do not fetch using the transport at all. That's
acceptable here, though, because we also do not perform a
connectivity check in that case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Putting messages like "Cloning into.." and "done" on stdout
is un-Unix and uselessly clutters the stdout channel. Send
them to stderr.
We have to tweak two tests to accommodate this:
1. t5601 checks for doubled output due to forking, and
doesn't actually care where the output goes; adjust it
to check stderr.
2. t5702 is trying to test whether progress output was
sent to stderr, but naively does so by checking
whether stderr produced any output. Instead, have it
look for "%", a token found in progress output but not
elsewhere (and which lets us avoid hard-coding the
progress text in the test).
This should not regress any scripts that try to parse the
current output, as the output is already internationalized
and therefore unstable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the review process of the previous commit (repack: rewrite the
shell script in C), Johannes Sixt proposed to retain any exit codes from
the sub-process, which makes it probably more obvious in case of failure.
As the commit before should behave as close to the original shell
script, the proposed change is put in this extra commit.
The infrastructure however was already setup in the previous commit.
(Having a local 'ret' variable)
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation of this patch is to get closer to a goal of being
able to have a core subset of git functionality built in to git.
That would mean
* people on Windows could get a copy of at least the core parts
of Git without having to install a Unix-style shell
* people using git in on servers with chrooted environments
do not need to worry about standard tools lacking for shell
scripts.
This patch is meant to be mostly a literal translation of the
git-repack script; the intent is that later patches would start using
more library facilities, but this patch is meant to be as close to a
no-op as possible so it doesn't do that kind of thing.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We liberally use "committish" and "commit-ish" (and "treeish" and
"tree-ish"); as these are non-words, let's unify these terms to
their dashed form. More importantly, clarify the documentation on
object peeling using these terms.
* rh/ishes-doc:
glossary: fix and clarify the definition of 'ref'
revisions.txt: fix and clarify <rev>^{<type>}
glossary: more precise definition of tree-ish (a.k.a. treeish)
use 'commit-ish' instead of 'committish'
use 'tree-ish' instead of 'treeish'
glossary: define commit-ish (a.k.a. committish)
glossary: mention 'treeish' as an alternative to 'tree-ish'
"git commit --author=$name", when $name is not in the canonical
"A. U. Thor <au.thor@example.xz>" format, looks for a matching name
from existing history, but did not consult mailmap to grab the
preferred author name.
* ap/commit-author-mailmap:
commit: search author pattern against mailmap
When using tab-completion, a directory path will often end with a
trailing slash which currently confuses "git reset" when dealing with
submodules. Now that we have parse_pathspec we can easily handle this
by simply adding the PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
To do this, we need to move the read_cache() call before the
parse_pathspec() call. All of the existing paths through cmd_reset()
that do not die early already call read_cache() at some point, so there
is no performance impact to doing this in the common case.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of re-implementing the "remove trailing slashes" loop in
builtin/rm.c just pass PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP to
parse_pathspec.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-ignore currently shows how .gitignore rules would treat untracked
paths. Tracked paths do not generate useful output. This prevents
debugging of why a path became tracked unexpectedly unless that path is
first removed from the index with `git rm --cached <path>`.
The option --no-index tells the command to bypass the check for the
path being in the index and hence allows tracked paths to be checked
too.
Whilst this behaviour deviates from the characteristics of `git add` and
`git status` its use case is unlikely to cause any user confusion.
Test scripts are augmented to check this option against the standard
ignores to ensure correct behaviour.
Signed-off-by: Dave Williams <dave@opensourcesolutions.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
This turns the template COMMIT_EDITMSG from e.g
# [...]
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
#
# modified: builtin/commit.c
#
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# t/foo
#
to
# [...]
# Changes to be committed:
# modified: builtin/commit.c
#
# Untracked files:
# t/foo
#
Most status hints were written to be accurate when running "git status"
before running a commit. Many of them are not applicable when the commit
has already been started, and should not be shown in COMMIT_EDITMSG. The
most obvious are hints advising to run "git commit",
"git rebase/am/cherry-pick --continue", which do not make sense when the
command has already been run.
Other messages become slightly inaccurate (e.g. hint to use "git add" to
add untracked files), as the suggested commands are not immediately
applicable during the editing of COMMIT_EDITMSG, but would be applicable
if the commit is aborted. These messages are both potentially helpful and
slightly misleading. This patch chose to remove them too, to avoid
introducing too much complexity in the status code.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
