* maint-2.32:
Git 2.32.3
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.31:
Git 2.31.4
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
* maint-2.30:
Git 2.30.5
setup: tighten ownership checks post CVE-2022-24765
git-compat-util: allow root to access both SUDO_UID and root owned
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
8959555cee (setup_git_directory(): add an owner check for the top-level
directory, 2022-03-02), adds a function to check for ownership of
repositories using a directory that is representative of it, and ways to
add exempt a specific repository from said check if needed, but that
check didn't account for owership of the gitdir, or (when used) the
gitfile that points to that gitdir.
An attacker could create a git repository in a directory that they can
write into but that is owned by the victim to work around the fix that
was introduced with CVE-2022-24765 to potentially run code as the
victim.
An example that could result in privilege escalation to root in *NIX would
be to set a repository in a shared tmp directory by doing (for example):
$ git -C /tmp init
To avoid that, extend the ensure_valid_ownership function to be able to
check for all three paths.
This will have the side effect of tripling the number of stat() calls
when a repository is detected, but the effect is expected to be likely
minimal, as it is done only once during the directory walk in which Git
looks for a repository.
Additionally make sure to resolve the gitfile (if one was used) to find
the relevant gitdir for checking.
While at it change the message printed on failure so it is clear we are
referring to the repository by its worktree (or gitdir if it is bare) and
not to a specific directory.
Helped-by: Junio C Hamano <junio@pobox.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
With a recent update to refuse access to repositories of other
people by default, "sudo make install" and "sudo git describe"
stopped working. This series intends to loosen it while keeping
the safety.
* cb/path-owner-check-with-sudo:
t0034: add negative tests and allow git init to mostly work under sudo
git-compat-util: avoid failing dir ownership checks if running privileged
t: regression git needs safe.directory when using sudo
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This 10-year old typo was introduced at 75b182ae (Update l10n guide:
change the repository URL, etc, 2012-03-02). The word "l10" should be
"l10n".
Signed-off-by: Arthur Milchior <arthur@milchior.fr>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
In asciidoc's HTML output of the "gitrevisions" and "git-rev-parse"
documentation, the header:
The ... (three-dot) Symmetric Difference Notation
is rendered using "&8230;", a horizontal ellipsis. This is visually
ugly, but also hard to search for or cut-and-paste. We really mean three
ascii dots (0x2e) here, so let's make sure it renders as such.
The simplest way to do that is just escaping the leading dot, as the
instances in the rest of the section do. Arguably this should all be
converted to use backticks, which would let us drop the quoting here and
elsewhere (e.g., {carat}). But that does change the rendering slightly.
So let's fix the bug first, and we can decide on migrating the whole
section separately.
Note that this produces an empty doc-diff of the manpages. Curiously,
asciidoc produces the same ellipsis entity in the XML file, but docbook
then converts it back into three literal dots for the roff output! So
the roff manpages have been correct all along (which may be a reason
nobody noticed this until now).
Reported-by: Arthur Milchior
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git:
name-rev: prefix annotate-stdin with '--' in message
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
The many test_configured_prune tests in t5510-fetch.sh test many
combinations of --prune, --prune-tags, and using 'origin' or an explicit
URL. Some machinery was introduced in e1790f9245 (fetch tests: fetch
<url> <spec> as well as fetch [<remote>], 2018-02-09) to replace
'origin' with this explicit URL. This URL is a "file:///" URL for the
root of the $TRASH_DIRECTORY.
However, if the current build tree has an '@' symbol, the
replacement using perl fails. It drops the '@' as well as anything
else in that directory name. You can observe this locally by
cloning git.git into a "victim@03" directory and running the test
script.
As we are writing in Perl anyway, pass in the shell variables involved
to the script as arguments and perform necessary string transformations
inside it, instead of assuming that it is sufficient to enclose the
$remote_url variable inside a pair of single quotes.
Reported-by: Randall Becker <rsbecker@nexbridge.com>
Original-patch-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash command line prompt (in contrib/) update.
* jp/prompt-clear-before-upstream-mark:
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
The code for combined diffs currently only writes to stdout. Abort and
report that fact instead of silently ignoring the --output option. The
(empty) output file has already been created at that point, though.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for combined diffs doesn't currently support ignoring changes
that match a regex. Abort and report that fact instead of running into
a segfault.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After b489b9d9aa (branch: use branch_checked_out() when deleting refs,
2022-06-14), we no longer look at our local "worktrees" variable, since
branch_checked_out() handles it under the hood. The compiler didn't
notice the unused variable because we call functions to initialize and
free it (so it's not totally unused, it just doesn't do anything
useful).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 12d47e3b1f (fetch: use new branch_checked_out() and add tests,
2022-06-14), fetch's update_local_ref() function stopped using its
"worktrees" parameter. It doesn't need it, since the
branch_checked_out() function examines the global worktrees under the
hood.
So we can not only drop the unused parameter from that function, but
also from its entire call chain. And as we do so all the way up to
do_fetch(), we can see that nobody uses it at all, and we can drop the
local variable there entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an option rather than command. Make the message convey this
similar to the other messages in the file.
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:git/git: (22 commits)
Git 2.37-rc1
git-compat-util: allow root to access both SUDO_UID and root owned
i18n: fix mismatched camelCase config variables
Another batch of fixes before -rc1
bug_fl(): correctly initialize trace2 va_list
relative_url(): fix incorrect condition
pack-mtimes: avoid closing a bogus file descriptor
read_index_from(): avoid memory leak
submodule--helper: avoid memory leak when fetching submodules
submodule-config: avoid memory leak
fsmonitor: avoid memory leak in `fsm_settings__get_incompatible_msg()`
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
perf-lib: fix missing test titles in output
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
ci(github): also mark up compile errors
ci(github): use grouping also in the `win-build` job
...
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
The reference given to users when the result of
setup_git_directory_gently_1() is unexpected is incorrect.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Lowercase in manpage should use camelCase:
* Documentation/config/http.txt: http.pinnedpubkey
Lowercase in translable strings should use camelCase:
* builtin/fast-import.c: pack.indexversion
* builtin/gc.c: gc.logexpiry
* builtin/index-pack.c: pack.indexversion
* builtin/pack-objects.c: pack.indexversion
* builtin/repack.c: pack.writebitmaps
* commit.c: i18n.commitencoding
* gpg-interface.c: user.signingkey
* http.c: http.postbuffer
* submodule-config.c: submodule.fetchjobs
Mismatched camelCases, choose the former:
* Documentation/config/transfer.txt: transfer.credentialsInUrl
remote.c: transfer.credentialsInURL
[^1]: https://github.com/git-l10n/git-po-helper
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename fetch.credentialsInUrl to transfer.credentialsInUrl as the
single configuration variable should work both in pushing and
fetching.
* ab/credentials-in-url-more:
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Recent CI update hides certain failures in test jobs, which has
been corrected.
* js/ci-github-workflow-markup:
ci(github): also mark up compile errors
ci(github): use grouping also in the `win-build` job
ci(github): bring back the 'print test failures' step
Improve test coverage with a handful of tests.
* ds/more-test-coverage:
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
va_list ap, cp;
va_copy(cp, ap);
va_start(ap, fmt);
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 63e95beb08 (submodule: port resolve_relative_url from shell to C,
2016-04-15), we added a loop over `url` where we are looking for `../`
or `./` components.
The loop condition we used is the pointer `url` itself, which is clearly
not what we wanted.
Pointed out by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 94cd775a6c (pack-mtimes: support reading .mtimes files,
2022-05-20), code was added to close the file descriptor corresponding
to the mtimes file.
However, it is possible that opening that file failed, in which case we
are closing a file descriptor with the value `-1`. Let's guard that
`close()` call.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 998330ac2e (read-cache: look for shared index files next to the
index, too, 2021-08-26), we added code that allocates memory to store
the base path of a shared index, but we never released that memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
