Update to ds/generation-numbers topic.
* ds/commit-graph-lockfile-fix:
commit-graph: fix UX issue when .lock file exists
commit-graph.txt: update design document
merge: check config before loading commits
commit: use generation number in remove_redundant()
commit: add short-circuit to paint_down_to_common()
commit: use generation numbers for in_merge_bases()
ref-filter: use generation number for --contains
commit-graph: always load commit-graph information
commit: use generations in paint_down_to_common()
commit-graph: compute generation numbers
commit: add generation number to struct commit
ref-filter: fix outdated comment on in_commit_list
The codepath around object-info API has been taught to take the
repository object (which in turn tells the API which object store
the objects are to be located).
* sb/oid-object-info:
cache.h: allow oid_object_info to handle arbitrary repositories
packfile: add repository argument to cache_or_unpack_entry
packfile: add repository argument to unpack_entry
packfile: add repository argument to read_object
packfile: add repository argument to packed_object_info
packfile: add repository argument to packed_to_object_type
packfile: add repository argument to retry_bad_packed_offset
cache.h: add repository argument to oid_object_info
cache.h: add repository argument to oid_object_info_extended
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
We use the lockfile API to avoid multiple Git processes from writing to
the commit-graph file in the .git/objects/info directory. In some cases,
this directory may not exist, so we check for its existence.
The existing code does the following when acquiring the lock:
1. Try to acquire the lock.
2. If it fails, try to create the .git/object/info directory.
3. Try to acquire the lock, failing if necessary.
The problem is that if the lockfile exists, then the mkdir fails, giving
an error that doesn't help the user:
"fatal: cannot mkdir .git/objects/info: File exists"
While technically this honors the lockfile, it does not help the user.
Instead, do the following:
1. Check for existence of .git/objects/info; create if necessary.
2. Try to acquire the lock, failing if necessary.
The new output looks like:
fatal: Unable to create
'<dir>/.git/objects/info/commit-graph.lock': File exists.
Another git process seems to be running in this repository, e.g.
an editor opened by 'git commit'. Please make sure all processes
are terminated then try again. If it still fails, a git process
may have crashed in this repository earlier:
remove the file manually to continue.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most code paths load commits using lookup_commit() and then
parse_commit(). In some cases, including some branch lookups, the commit
is parsed using parse_object_buffer() which side-steps parse_commit() in
favor of parse_commit_buffer().
With generation numbers in the commit-graph, we need to ensure that any
commit that exists in the commit-graph file has its generation number
loaded.
Create new load_commit_graph_info() method to fill in the information
for a commit that exists only in the commit-graph file. Call it from
parse_commit_buffer() after loading the other commit information from
the given buffer. Only fill this information when specified by the
'check_graph' parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While preparing commits to be written into a commit-graph file, compute
the generation numbers using a depth-first strategy.
The only commits that are walked in this depth-first search are those
without a precomputed generation number. Thus, computation time will be
relative to the number of new commits to the commit-graph file.
If a computed generation number would exceed GENERATION_NUMBER_MAX, then
use GENERATION_NUMBER_MAX instead.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The generation number of a commit is defined recursively as follows:
* If a commit A has no parents, then the generation number of A is one.
* If a commit A has parents, then the generation number of A is one
more than the maximum generation number among the parents of A.
Add a uint32_t generation field to struct commit so we can pass this
information to revision walks. We use three special values to signal
the generation number is invalid:
GENERATION_NUMBER_INFINITY 0xFFFFFFFF
GENERATION_NUMBER_MAX 0x3FFFFFFF
GENERATION_NUMBER_ZERO 0
The first (_INFINITY) means the generation number has not been loaded or
computed. The second (_MAX) means the generation number is too large to
store in the commit-graph file. The third (_ZERO) means the generation
number was loaded from a commit graph file that was written by a version
of git that did not support generation numbers.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Precompute and store information necessary for ancestry traversal
in a separate file to optimize graph walking.
* ds/commit-graph:
commit-graph: implement "--append" option
commit-graph: build graph from starting commits
commit-graph: read only from specific pack-indexes
commit: integrate commit graph with commit parsing
commit-graph: close under reachability
commit-graph: add core.commitGraph setting
commit-graph: implement git commit-graph read
commit-graph: implement git-commit-graph write
commit-graph: implement write_commit_graph()
commit-graph: create git-commit-graph builtin
graph: add commit graph design document
commit-graph: add format document
csum-file: refactor finalize_hashfile() method
csum-file: rename hashclose() to finalize_hashfile()
The commit-graph file provides quick access to commit data, including
the OID of the root tree for each commit in the graph. When performing
a deep commit-graph walk, we may not need to load most of the trees
for these commits.
Delay loading the tree object for a commit loaded from the graph
until requested via get_commit_tree(). Do not lazy-load trees for
commits not in the graph, since that requires duplicate parsing
and the relative peformance improvement when trees are not needed
is small.
On the Linux repository, performance tests were run for the following
command:
git log --graph --oneline -1000
Before: 0.92s
After: 0.66s
Rel %: -28.3%
Adding '-- kernel/' to the command requires loading the root tree
for every commit that is walked. There was no measureable performance
change as a result of this patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-commit-graph to add all commits from the existing
commit-graph file to the file about to be written. This should be
used when adding new commits without performing garbage collection.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-commit-graph to read commits from stdin when the
--stdin-commits flag is specified. Commits reachable from these
commits are added to the graph. This is a much faster way to construct
the graph than inspecting all packed objects, but is restricted to
known tips.
For the Linux repository, 700,000+ commits were added to the graph
file starting from 'master' in 7-9 seconds, depending on the number
of packfiles in the repo (1, 24, or 120).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-commit-graph to inspect the objects only in a certain list
of pack-indexes within the given pack directory. This allows updating
the commit graph iteratively.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Git to inspect a commit graph file to supply the contents of a
struct commit when calling parse_commit_gently(). This implementation
satisfies all post-conditions on the struct commit, including loading
parents, the root tree, and the commit date.
If core.commitGraph is false, then do not check graph files.
In test script t5318-commit-graph.sh, add output-matching conditions on
read-only graph operations.
By loading commits from the graph instead of parsing commit buffers, we
save a lot of time on long commit walks. Here are some performance
results for a copy of the Linux repository where 'master' has 678,653
reachable commits and is behind 'origin/master' by 59,929 commits.
| Command | Before | After | Rel % |
|----------------------------------|--------|--------|-------|
| log --oneline --topo-order -1000 | 8.31s | 0.94s | -88% |
| branch -vv | 1.02s | 0.14s | -86% |
| rev-list --all | 5.89s | 1.07s | -81% |
| rev-list --all --objects | 66.15s | 58.45s | -11% |
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach write_commit_graph() to walk all parents from the commits
discovered in packfiles. This prevents gaps given by loose objects or
previously-missed packfiles.
Also automatically add commits from the existing graph file, if it
exists.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-commit-graph to read commit graph files and summarize their contents.
Use the read subcommand to verify the contents of a commit graph file in the
tests.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Git to write a commit graph file by checking all packed objects
to see if they are commits, then store the file in the given object
directory.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
