If the user supplies -l to git-branch when creating a new branch
then the new branch's log should be created automatically and the
branch creation should be logged in that log.
Further if a branch is being deleted and it had a log then also
verify that the log was deleted.
Test git-checkout -b foo -l for creating a new branch foo with a
log and checking out that branch.
Fixed git-checkout -b foo -l as the branch variable name was
incorrect in the script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Switch git checkout -b to use git-update-ref rather than echo and
a shell I/O redirection. This is more in line with typical GIT
commands and allows -b to be logged according to the normal ref
logging rules.
Added -l option to allow users to create the ref log at the same
time as creating a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After doing an in-index 3-way merge, we always do the stock
"merge-index merge-one-file" without doing anything fancy;
use of --aggressive helps performance quite a bit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we refused to switch branches, we incorrectly showed
differences from the branch we would have switched to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, when we switched a branch we used diff-files to show
paths that are dirty in the working tree. But we allow switching
branches with updated index ("read-tree -m -u $old $new" works that
way), and only showing paths that have differences in the working
tree but not paths that are different in index was confusing.
This shows both as modified from the top commit of the branch we
just have switched to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shows your working file state when you switch branches. As
a side effect, "git checkout" without any branch name (i.e. stay
on the current branch) becomes a more concise shorthand for the
"git status" command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Instead of going interactive, introduce a command line switch
'-m' to allow merging changes when normal two-way merge by
read-tree prevents branch switching.
* Leave the unmerged stages intact if automerge fails, but
reset index entries of cleanly merged paths to that of the
new branch, so that "git diff" (not "git diff HEAD") would
show the local modifications.
* Swap the order of trees in read-tree three-way merge used in
the fallback, so that `git diff` to show the conflicts become
more natural.
* Describe the new option and give more examples in the documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When switching branches, if the working tree has a local
modification at paths that are different between current and new
branches, we refused the operation saying "cannot merge." This
attempts to do an automerge for such paths.
This is still experimental.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A proposed change to show cwd relative paths by default from
ls-tree when run from a subdirectory means we would need to
give --full-name option to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-checkout does two very different things, and what they
should do when run from subdirectory are quite different.
It does not make any sense to run the one that switches the
current head from anywhere other than the toplevel:
git-checkout [-f] <branch>
git-checkout [-b <branch>] <committish>
We could of course chdir to top and do the whole-tree checkout
in git-checkout, but the point is the operation does not make
sense on a partial tree. The whole tree is checked out.
The other form is to update the index file and working tree file
selectively:
git-checkout <treeish> <file>... ;# out of tree to index and file
git-checkout -- <file>... ;# out of index to file
This form _does_ make sense to run from subdirectory; and I
myself often wish we supported this.
So here is a patch to do both.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now all the users of this script detect its exit status and die,
complaining that it is outside git repository. So move the code
that dies from all callers to git-sh-setup script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-update-index --index-info can almost be usable to read from ls-tree
output to update the index (and not the working tree file) to HEAD commit,
but not quite. It was designed to read from git-apply --index-info
output, and does not want " blob " in ls-tree output. Accept that as well.
This lets us update "git-checkout <ent> <path>" that used to filter the
extra " blob " string out. Noted by Luben.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-checkout -b frotz/nitfol master" failed to create
$GIT_DIR/refs/heads/frotz/nitfol but went ahead and updated
$GIT_DIR/HEAD to point at it, resulting in a corrupt repository.
Exit when we cannot create the new branch with an error status.
While we are at it, there is no reason to forbid subdirectories
in refs/heads, so make sure we handle that correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When extra paths arguments are given, git-checkout reverts only those
paths to either the version recorded in the index or the version
recorded in the given tree-ish.
This has been on the TODO list for quite a while.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update check_ref_format() function to reject ref names that:
* has a path component that begins with a ".", or
* has a double dots "..", or
* has ASCII control character, "~", "^", ":" or SP, anywhere, or
* ends with a "/".
Use it in 'git-checkout -b', 'git-branch', and 'git-tag' to make sure
that newly created refs are well-formed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the counterpart of git-update-ref that lets you read
and create "symbolic refs". By default it uses a symbolic link
to represent ".git/HEAD -> refs/heads/master", but it can be compiled
to use the textfile symbolic ref.
The places that did 'readlink .git/HEAD' and 'ln -s refs/heads/blah
.git/HEAD' have been converted to use new git-symbolic-ref command, so
that they can deal with either implementation.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
The target to check out does not need to be a branch. The _result_ of the
checkout needs to be a branch. Don't confuse the two, and then insult the
user.
Insulting is ok, but I personally get really pissed off is a tool is both
confused and insulting. At least be _correct_ and insulting.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you make a commit on a path, and then make the path
cache-dirty afterwards without changing its contents, 'git
checkout' to switch to another branch is prevented because
switching the branches done with 'read-tree -m -u $current
$next' detects that the path is cache-dirty, but it does not
bother noticing that the contents of the path has not been
actualy changed.
Since switching branches would involve checking out paths
different in the two branches, hence it is reasonably expensive
operation, we can afford to run update-index before running
read-tree to reduce this kind of false change from triggering
the check needlessly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
