git-p4 was using "git name-rev" to find out the current branch.
That is not safe, since if multiple branches or tags point at
the same revision, the result obtained might not be what is
expected.
Instead use "git symbolic-ref".
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using name-rev to find the current git branch means that git-p4
does not correctly get the current branch name if there are
multiple branches pointing at HEAD, or a tag.
This change adds a test case which demonstrates the problem.
Configuring which branches are allowed to be submitted from goes
wrong, as git-p4 gets confused about which branch is in use.
This appears to be the only place that git-p4 actually cares
about the current branch.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few unterminated here documents in tests were fixed, which in
turn revealed incorrect expectations the tests make. These tests
have been updated.
* st/verify-tag:
t7004, t7030: fix here-doc syntax errors
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
"git fetch" that requests a commit by object name, when the other
side does not allow such an request, failed without much
explanation.
* mm/fetch-show-error-message-on-unadvertised-object:
fetch-pack: add specific error for fetching an unadvertised object
fetch_refs_via_pack: call report_unmatched_refs
fetch-pack: move code to report unmatched refs to a function
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
A few tests were run conditionally under (rare) conditions where
they cannot be run (like running cvs tests under 'root' account).
* ab/cond-skip-tests:
gitweb tests: skip tests when we don't have Time::HiRes
gitweb tests: change confusing "skip_all" phrasing
cvs tests: skip tests that call "cvs commit" when running as root
user.email that consists of only cruft chars should consistently
error out, but didn't.
* jk/ident-empty:
ident: do not ignore empty config name/email
ident: reject all-crud ident name
ident: handle NULL email when complaining of empty name
ident: mark error messages for translation
"git repack --depth=<n>" for a long time busted the specified depth
when reusing delta from existing packs. This has been corrected.
* jk/delta-chain-limit:
pack-objects: convert recursion to iteration in break_delta_chain()
pack-objects: enforce --depth limit in reused deltas
Teach the "debug" helper used in the test framework that allows a
command to run under "gdb" to make the session interactive.
* sg/test-with-stdin:
tests: make the 'test_pause' helper work in non-verbose mode
tests: create an interactive gdb session with the 'debug' helper
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
This supersedes jc/config-case-cmdline topic that has been discarded.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
Jan Palus noticed that some here-doc are spelled incorrectly,
resulting the entire remainder of the test snippet being slurped
into the "expect" file as if it were data, e.g. in this sequence
cat >expect <<EOF &&
... expectation ...
EOF
git $cmd_being_tested >actual &&
test_cmp expect actual
the last command of the test is "cat" that sends everything to
'expect' and succeeds.
Fixing these issues in t7004 and t7030 reveals that "git tag -v"
and "git verify-tag" with their --format option do not work as the
test was expecting originally. Instead of showing both valid tags
and tags with incorrect signatures on their output, tags that do not
pass verification are omitted from the output. Another breakage that
is uncovered is that these tests must be restricted to environment
where gpg is available.
Arguably, that is a safer behaviour, and because the format
specifiers like %(tag) do not have a way to show if the signature
verifies correctly, the command with the --format option cannot be
used to get a list of tags annotated with their signature validity
anyway.
For now, let's fix the here-doc syntax, update the expectation to
match the reality, and update the test prerequisite.
Maybe later when we extend the --format language available to "git
tag -v" and "git verify-tag" to include things like "%(gpg:status)",
we may want to change the behaviour so that piping a list of tag
names into
xargs git verify-tag --format='%(gpg:status) %(tag)'
becomes a good way to produce such a list, but that is a separate
topic.
Noticed-by: Jan Palus <jan.palus@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Santiago Torres <santiago@nyu.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are three issues with the test:
* The syntax of the here-doc was wrong, such that the entire test was
sucked into the here-doc, which is why the test succeeded.
* The variable $submodulesha1 was not expanded as it was inside a quoted
here text. We do not want to quote EOF marker for this.
* The redirection from the git command to the output file for comparison
was wrong as the -C operator from git doesn't apply to the redirect path.
Also we're interested in stderr of that command.
Noticed-by: Jan Palus <jan.palus@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This came as part of jk/quote-env-path-list-component and was merged
to 2.11.1 and later.
Noticed-by: Jan Palus <jan.palus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an oversight in 55856a35b2 (rm: absorb a submodules git dir
before deletion, 2016-12-27), as the body of the test changed without
adapting the test subject.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result
of out-of-bounds memory reads.
diffcore-pickaxe.c:contains() looks for all matches of the given regex
in a buffer in a loop, advancing the buffer pointer to the end of the
last match in each iteration. When we switched to REG_STARTEND in
b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing
the size of that buffer to the regexp engine, too. Unfortunately,
this buffer size is never updated on subsequent iterations, and as the
buffer pointer advances on each iteration, this "bufptr+bufsize"
points past the end of the buffer. This results in segmentation
fault, if that memory can't be accessed. In case of 'git log' it can
also result in erroneously listed commits, if the memory past the end
of buffer is accessible and happens to contain data matching the
regex.
Reduce the buffer size on each iteration as the buffer pointer is
advanced, thus maintaining the correct end of buffer location.
Furthermore, make sure that the buffer pointer is not dereferenced in
the control flow statements when we already reached the end of the
buffer.
The new test is flaky, I've never seen it fail on my Linux box even
without the fix, but this is expected according to db5dfa3 (regex:
-G<pattern> feeds a non NUL-terminated string to regexec() and fails,
2016-09-21). However, it did fail on Travis CI with the first (and
incomplete) version of the fix, and based on that commit message I
would expect the new test without the fix to fail most of the time on
Windows.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the 'test_pause' helper function invokes the shell mid-test, it
explicitly redirects the shell's stdout and stderr to file descriptors
3 and 4, which are the stdout and stderr of the tests (i.e. where they
would be connected anyway without those redirections). These file
descriptors are only attached to the terminal in verbose mode, hence
the restriction of 'test_pause' to work only with '-v'.
Redirect the shell's stdout and stderr to the test environment's
original stdout and stderr, allowing it to work properly even in
non-verbose mode, and the restriction can be lifted.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'debug' test helper is supposed to facilitate debugging by running
a command of the test suite under gdb. Unfortunately, its usefulness
is severely limited, because that gdb session is not interactive,
since the test's, and thus gdb's standard input is redirected from
/dev/null (for a good reason, see 781f76b15 (test-lib: redirect stdin
of tests, 2011-12-15)).
Redirect gdb's standard file descriptors from/to the test
environment's stdin, stdout and stderr in the 'debug' helper, thus
creating an interactive gdb session (even in non-verbose mode), which
is much, much more useful.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
... and then to down to 'maint'.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
The code to parse "git log -L..." command line was buggy when there
are many ranges specified with -L; overrun of the allocated buffer
has been fixed.
* ax/line-log-range-merge-fix:
line-log.c: prevent crash during union of too many ranges
The patch subcommand of "git add -i" was meant to have paths
selection prompt just like other subcommand, unlike "git add -p"
directly jumps to hunk selection. Recently, this was broken and
"add -i" lost the paths selection dialog, but it now has been
fixed.
* jk/add-i-patch-do-prompt:
add--interactive: fix missing file prompt for patch mode with "-i"
This test just checks that old clients can clone and fetch
from a newer git-daemon. The opposite should also be true,
but it's hard to test ancient versions of git-daemon because
they lack basic options like "--listen".
Note that we have to make a slight tweak to the
lib-git-daemon helper from the regular tests, so that it
starts the daemon with our correct git.a version.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current test suite is good at letting you test a
particular version of Git. But it's not very good at letting
you test _two_ versions and seeing how they interact (e.g.,
one cloning from the other).
This commit adds a test harness that will build two
arbitrary versions of git and make it easy to call them from
inside your tests. See the README and the example script for
details.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 4ac9006f83 (real_path: have callers use real_pathdup and
strbuf_realpath, 2016-12-12), we changed the xstrdup(real_path())
pattern to use real_pathdup() directly.
The problem with this change is that real_path() calls
strbuf_realpath() with die_on_error = 1 while real_pathdup() calls
it with die_on_error = 0. Meaning that in cases where real_path()
causes Git to die() with an error message, real_pathdup() is silent
and returns NULL instead.
The callers, however, are ill-prepared for that change, as they expect
the return value to be non-NULL (and otherwise the function died
with an appropriate error message).
Fix this by extending real_pathdup()'s signature to accept the
die_on_error flag and simply pass it through to strbuf_realpath(),
and then adjust all callers after a careful audit whether they would
handle NULLs well.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When GIT_WORK_TREE does not specify a valid path, we should error
out, instead of crashing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the git_commit_non_empty_tree function would always pass any
commit with no parents to git-commit-tree, regardless of whether the
tree was nonempty. The new commit would then be recorded in the
filter-branch revision map, and subsequent commits which leave the tree
untouched would be correctly filtered.
With this change, parentless commits with an empty tree are correctly
pruned, and an empty file is recorded in the revision map, signifying
that it was rewritten to "no commits." This works naturally with the
parent mapping for subsequent commits.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sanity check before changing the logic in git_commit_non_empty_tree.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test to expose a bug in filter-branch whereby the root commit is
never pruned, even though its tree is empty and --prune-empty is given.
The setup isn't exactly pretty, but I couldn't think of a simpler way to
create a parallel commit graph sans the first commit.
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing implementation of range_set_union does not correctly
reallocate memory, leading to a heap overflow when it attempts to union
more than 24 separate line ranges.
For struct range_set *out to grow correctly it must have out->nr set to
the current size of the buffer when it is passed to range_set_grow.
However, the existing implementation of range_set_union only updates
out->nr at the end of the function, meaning that it is always zero
before this. This results in range_set_grow never growing the buffer, as
well as some of the union logic itself being incorrect as !out->nr is
always true.
The reason why 24 is the limit is that the first allocation of size 1
ends up allocating a buffer of size 24 (due to the call to alloc_nr in
ALLOC_GROW). This goes some way to explain why this hasn't been
caught before.
Fix the problem by correctly updating out->nr after reallocating the
range_set. As this results in out->nr containing the same value as the
variable o, replace o with out->nr as well.
Finally, add a new test to help prevent the problem reoccurring in the
future. Thanks to Vegard Nossum for writing the test.
Signed-off-by: Allan Xavier <allan.x.xavier@oracle.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's tempting to say:
./run v1.0.0 HEAD
to see how we've sped up Git over the years. Unfortunately,
this doesn't quite work because versions of Git prior to
v1.7.0 lack bin-wrappers, so our "run" script doesn't
correctly put them in the PATH.
Worse, it means we silently find whatever other "git" is in
the PATH, and produce test results that have no bearing on
what we asked for.
Let's fallback to the main git directory when bin-wrappers
isn't present. Many modern perf scripts won't run with such
an antique version of Git, of course, but at least those
failures are detected and reported (and you're free to write
a limited perf script that works across many versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1a0962dee (t/perf: fix regression in testing older
versions of git, 2016-06-22), we point "$MODERN_GIT" to a
copy of git that matches the t/perf script itself, and which
can be used for tasks outside of the actual timings. This is
needed because the setup done by perf scripts keeps moving
forward in time, and may use features that the older
versions of git we are testing do not have.
That commit used $MODERN_GIT to fix a case where we relied
on the relatively recent --git-path option. But if you go
back further still, there are more problems.
Since 7501b5921 (perf: make the tests work in worktrees,
2016-05-13), we use "git -C", but versions of git older than
44e1e4d67 (git: run in a directory given with -C option,
2013-09-09) don't know about "-C". So testing an old version
of git with a new version of t/perf will fail the setup
step.
We can fix this by using $MODERN_GIT during the setup;
there's no need to use the antique version, since it doesn't
affect the timings. Likewise, we'll adjust the "init"
invocation; antique versions of git called this "init-db".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In p0001, a variable was created in a test_expect_success block to be
used in later test_perf blocks, but was not exported. This caused the
variable to not appear in those blocks (this can be verified by writing
'test -n "$commit"' in those blocks), resulting in a slightly different
invocation than what was intended. Export that variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance filter_refs (which decides whether a request for an unadvertised
object should be sent to the server) to record a new match status on the
"struct ref" when a request is not allowed, and have
report_unmatched_refs check for this status and print a special error
message, "Server does not allow request for unadvertised object".
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" currently doesn't bother to check that it got all refs it
sought, because the common case of requesting a nonexistent ref triggers
a die() in get_fetch_map. However, there's at least one case that
slipped through: "git fetch REMOTE SHA1" if the server doesn't allow
requests for unadvertised objects. Make fetch_refs_via_pack (which is
on the "git fetch" code path) call report_unmatched_refs so that we at
least get an error message in that case.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare to reuse this code in transport.c for "git fetch".
While we're here, internationalize the existing error message.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse "git checkout $NAME", we try to interpret
$NAME as a local branch-name. If it is, then we point HEAD
to that branch. Otherwise, we detach the HEAD at whatever
commit $NAME points to.
We do the interpretation by calling strbuf_branchname(), and
then blindly sticking "refs/heads/" on the front. This leads
to nonsense results when expansions like "@{upstream}" or
"@" point to something besides a local branch. We end up
with a local branch name like "refs/heads/origin/master" or
"refs/heads/HEAD".
Normally this has no user-visible effect because those
branches don't exist, and so we fallback to feeding the
result to get_sha1(), which resolves them correctly.
But as the new test in t3204 shows, there are corner cases
where the effect is observable, and we check out the wrong
local branch rather than detaching to the correct one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
