"git grep -i" has been taught to fold case in non-ascii locales
correctly.
* nd/icase:
grep.c: reuse "icase" variable
diffcore-pickaxe: support case insensitive match on non-ascii
diffcore-pickaxe: Add regcomp_or_die()
grep/pcre: support utf-8
gettext: add is_utf8_locale()
grep/pcre: prepare locale-dependent tables for icase matching
grep: rewrite an if/else condition to avoid duplicate expression
grep/icase: avoid kwsset when -F is specified
grep/icase: avoid kwsset on literal non-ascii strings
test-regex: expose full regcomp() to the command line
test-regex: isolate the bug test code
grep: break down an "if" stmt in preparation for next changes
In the previous change in this function, we add locale support for
single-byte encodings only. It looks like pcre only supports utf-* as
multibyte encodings, the others are left in the cold (which is
fine).
We need to enable PCRE_UTF8 so pcre can find character boundary
correctly. It's needed for case folding (when --ignore-case is used)
or '*', '+' or similar syntax is used.
The "has_non_ascii()" check is to be on the conservative side. If
there's non-ascii in the pattern, the searched content could still be
in utf-8, but we can treat it just like a byte stream and everything
should work. If we force utf-8 based on locale only and pcre validates
utf-8 and the file content is in non-utf8 encoding, things break.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: Plamen Totev <plamen.totev@abv.bg>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default tables are usually built with C locale and only suitable
for LANG=C or similar. This should make case insensitive search work
correctly for all single-byte charsets.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"!icase || ascii_only" is repeated twice in this if/else chain as this
series evolves. Rewrite it (and basically revert the first if
condition back to before the "grep: break down an "if" stmt..." commit).
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous commit, we can't use kws on icase search
outside ascii range. But we can't simply pass the pattern to
regcomp/pcre like the previous commit because it may contain regex
special characters, so we need to quote the regex first.
To avoid misquote traps that could lead to undefined behavior, we
always stick to basic regex engine in this case. We don't need fancy
features for grepping a literal string anyway.
basic_regex_quote_buf() assumes that if the pattern is in a multibyte
encoding, ascii chars must be unambiguously encoded as single
bytes. This is true at least for UTF-8. For others, let's wait until
people yell up. Chances are nobody uses multibyte, non utf-8 charsets
anymore.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect the pattern is just a literal string, we avoid heavy
regex engine and use fast substring search implemented in kwsset.c.
But kws uses git-ctype which is locale-independent so it does not know
how to fold case properly outside ascii range. Let regcomp or pcre
take care of this case instead. Slower, but accurate.
Noticed-by: Plamen Totev <plamen.totev@abv.bg>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show -W" (extend hunks to cover the entire function, delimited
by lines that match the "funcname" pattern) used to show the entire
file when a change added an entire function at the end of the file,
which has been fixed.
* rs/xdiff-hunk-with-func-line:
xdiff: fix merging of appended hunk with -W
grep: -W: don't extend context to trailing empty lines
t7810: add test for grep -W and trailing empty context lines
xdiff: don't trim common tail with -W
xdiff: -W: don't include common trailing empty lines in context
xdiff: ignore empty lines before added functions with -W
xdiff: handle appended chunks better with -W
xdiff: factor out match_func_rec()
t4051: rewrite, add more tests
Empty lines between functions are shown by grep -W, as it considers them
to be part of the function preceding them. They are not interesting in
most languages. The previous patches stopped showing them for diff -W.
Stop showing empty lines trailing a function with grep -W. Grep scans
the lines of a buffer from top to bottom and prints matching lines
immediately. Thus we need to peek ahead in order to determine if an
empty line is part of a function body and worth showing or not.
Remember how far ahead we peeked in order to avoid having to do so
repeatedly when handling multiple consecutive empty lines.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at there, improve the error message a bit (what operation failed?)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To set up default colors, we sometimes strcpy() from the
default string literals into our color buffers. This isn't a
bug (assuming the destination is COLOR_MAXLEN bytes), but
makes it harder to audit the code for problematic strcpy
calls.
Let's introduce a color_set which copies under the
assumption that there are COLOR_MAXLEN bytes in the
destination (of course you can call it on a smaller buffer,
so this isn't providing a huge amount of safety, but it's
more convenient than calling xsnprintf yourself).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This looks at first glance like the sprintf can overflow our
buffer, but it's actually fine; the p->origin string is
something constant and small, like "command line" or "-e
option".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
This replaces "x ? xstrdup(x) : NULL" with xstrdup_or_null(x).
The change is fairly mechanical, with the exception of
resolve_refdup, which can eliminate a temporary variable.
There are still a few hits grepping for "?.*xstrdup", but
these are of slightly different forms and cannot be
converted (e.g., "x ? xstrdup(x->foo) : NULL").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow painting or not painting (partial) matches in context lines
when showing "grep -C<num>" output in color.
* rs/grep-color-words:
grep: add color.grep.matchcontext and color.grep.matchselected
The config option color.grep.match can be used to specify the highlighting
color for matching strings. Add the options matchContext and matchSelected
to allow different colors to be specified for matching strings in the
context vs. in selected lines. This is similar to the ms and mc specifiers
in GNU grep's environment variable GREP_COLORS.
Tests are from Zoltan Klinger's earlier attempt to solve the same
issue in a different way.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the color-parsing function was used only for
config variables. It made sense to pass the variable name so
that the die() message could be something like:
$ git -c color.branch.plain=bogus branch
fatal: bad color value 'bogus' for variable 'color.branch.plain'
These days we call it in other contexts, and the resulting
error messages are a little confusing:
$ git log --pretty='%C(bogus)'
fatal: bad color value 'bogus' for variable '--pretty format'
$ git config --get-color foo.bar bogus
fatal: bad color value 'bogus' for variable 'command line'
This patch teaches color_parse to complain only about the
value, and then return an error code. Config callers can
then propagate that up to the config parser, which mentions
the variable name. Other callers can provide a custom
message. After this patch these three cases now look like:
$ git -c color.branch.plain=bogus branch
error: invalid color value: bogus
fatal: unable to parse 'color.branch.plain' from command-line config
$ git log --pretty='%C(bogus)'
error: invalid color value: bogus
fatal: unable to parse --pretty format
$ git config --get-color foo.bar bogus
error: invalid color value: bogus
fatal: unable to parse default color value
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration variable to force --full-name to be default for
"git grep".
This may cause regressions on scripted users that do not expect
this new behaviour.
* as/grep-fullname-config:
grep: add grep.fullName config variable
This configuration variable sets the default for the --full-name option.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" learns to handle combination of "-h (no header)" and "-c
(counts)".
* rs/grep-h-c:
grep: support -h (no header) with --count
t7810: add missing variables to tests in loop
Suppress printing the header (filename) with -h even if in -c/--count
mode. GNU grep and OpenBSD's grep do the same.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We invented hashcpy() to keep the abstraction of "object name"
behind it. Use it instead of calling memcpy() with hard-coded
20-byte length when moving object names between pieces of memory.
Leave ppc/sha1.c as-is, because the function is about the SHA-1 hash
algorithm whose output is and will always be 20 bytes.
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Sun He <sunheehnus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently and not so recently, we made sure that log/grep type operations
use textconv filters when a userfacing diff would do the same:
ef90ab6 (pickaxe: use textconv for -S counting, 2012-10-28)
b1c2f57 (diff_grep: use textconv buffers for add/deleted files, 2012-10-28)
0508fe5 (combine-diff: respect textconv attributes, 2011-05-23)
"git grep" currently does not use textconv filters at all, that is
neither for displaying the match and context nor for the actual grepping,
even when requested by --textconv.
Introduce an option "--textconv" which makes git grep use any configured
textconv filters for grepping and output purposes. It is off by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a GREP_HEADER_FIELD_MIN so we can check that the field value is
sane and silence the clang warning.
Clang warning happens because the enum is unsigned (this is
implementation-defined, and there is no negative fields) and the check
is then tautological.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
grep searches for .gitattributes using "name" field in struct
grep_source but that field is not real on-disk path name. For example,
"grep pattern rev" fills the field with "rev:path", and Git looks for
.gitattributes in the (non-existent but exploitable) path "rev:path"
instead of "path".
This patch passes real paths down to grep_source_load_driver() when:
- grep on work tree
- grep on the index
- grep a commit (or a tag if it points to a commit)
so that these cases look up .gitattributes at proper paths.
.gitattributes lookup is disabled in all other cases.
Initial-work-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the hand-rolled initialization sequence,
use grep_init() to populate the necessary bits. This opens
the door to allow the calling commands to optionally read
grep.* configuration variables via git_config() if they
want to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switching between -E/-G/-P/-F correctly needs a lot more than just
flipping opt->regflags bit these days, and we have a nice helper
function buried in builtin/grep.c for the sole use of "git grep".
Extract it so that "log --grep" family can also use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration handling is a library-ish part of this program,
that is not specific to "git grep" command. It should be reusable
by "log" and others.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to --author/--committer which filters commits by author and
committer header fields. --grep-reflog adds a fake "reflog" header to
commit and a grep filter to search on that line.
All rules to --author/--committer apply except no timestamp stripping.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep supports only author and committer headers, which have the same
special treatment that later headers may or may not have. Check for
field type and only strip_timestamp() when the field is either author
or committer.
GREP_HEADER_FIELD_MAX is put in the grep_header_field enum to be
calculated automatically, correctly, as long as it's at the end of the
enum.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding a declaration at the beginning is not sufficient for obvious
reasons. The definition has to be made static.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have both header expression (which has to be an OR node by
construction) and a pattern expression (which could be anything), we
create a new top-level OR node to bind them together, and the
resulting expression structure looks like this:
OR
/ \
/ \
pattern OR
/ \ / \
..... committer OR
/ \
author TRUE
The three elements on the top-level backbone that are inspected by
the "all-match" logic are "pattern", "committer" and "author". When
there are more than one elements in the "pattern", the top-level
node of the "pattern" part of the subtree is an OR, and that node is
inspected by "all-match".
The result ends up ignoring the "--all-match" given from the command
line. A match on either side of the pattern is considered a match,
hence:
git log --grep=A --grep=B --author=C --all-match
shows the same "authored by C and has either A or B" that is correct
only when run without "--all-match".
Fix this by turning the resulting expression around when "--all-match"
is in effect, like this:
OR
/ \
/ \
/ OR
committer / \
author \
pattern
The set of nodes on the top-level backbone in the resulting
expression becomes "committer", "author", and the nodes that are on
the top-level backbone of the "pattern" subexpression. This makes
the "all-match" logic inspect the same nodes in "pattern" as the
case without the author and/or the committer restriction, and makes
the earlier "log" example to show "authored by C and has A and has
B", which is what the command line expects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our "grep" allows complex boolean expressions to be formed to match
each individual line with operators like --and, '(', ')' and --not.
Introduce the "--debug" option to show the parse tree to help people
who want to debug and enhance it.
Also "log" learns "--grep-debug" option to do the same. The command
line parser to the log family is a lot more limited than the general
"git grep" parser, but it has special handling for header matching
(e.g. "--author"), and a parse tree is valuable when working on it.
Note that "--all-match" is *not* any individual node in the parse
tree. It is an instruction to the evaluator to check all the nodes
in the top-level backbone have matched and reject a document as
non-matching otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep -e '$pattern'", unlike the case where the patterns are read from
a file, did not treat individual lines in the given pattern argument as
separate regular expressions as it should.
By René Scharfe
* rs/maint-grep-F:
grep: stop leaking line strings with -f
grep: support newline separated pattern list
grep: factor out do_append_grep_pat()
grep: factor out create_grep_pat()
Currently, patterns that contain newline characters don't match anything
when given to git grep. Regular grep(1) interprets patterns as lists of
newline separated search strings instead.
Implement this functionality by creating and inserting extra grep_pat
structures for patterns consisting of multiple lines when appending to
the pattern lists. For simplicity, all pattern strings are duplicated.
The original pattern is truncated in place to make it contain only the
first line.
Requested-by: Torne (Richard Coles) <torne@google.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add do_append_grep_pat() as a shared function for adding patterns to
the header pattern list and the general pattern list.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add create_grep_pat(), a shared helper for all grep pattern allocation
and initialization needs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
In order to prepare the kwset machinery for a case-insensitive search, we
used to use a static table of 256 elements and filled it every time before
calling kwsalloc(). Because the kwset machinery will never modify this
table, just allocate a single instance globally and fill it at the compile
time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git grep" is run with -P/--perl-regexp, it doesn't match ^ and $ at
the beginning/end of the line. This is because PCRE normally matches ^
and $ at the beginning/end of the whole text, not for each line, and "git
grep" passes a large chunk of text (possibly containing many lines) to
pcre_exec() and then splits the text into lines.
This makes "git grep -P" behave differently from "git grep -E" and also
from "grep -P" and "pcregrep":
$ cat file
a
b
$ git grep --no-index -P '^ ' file
$ git grep --no-index -E '^ ' file
file: b
$ grep -c -P '^ ' file
b
$ pcregrep -c '^ ' file
b
Reported-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we load each file to grep into memory, check whether
it's binary, and then either grep it (the default) or not
(if "-I" was given).
In the "-I" case, we can skip loading the file entirely if
it is marked as binary via gitattributes. On my giant
3-gigabyte media repository, doing "git grep -I foo" went
from:
real 0m0.712s
user 0m0.044s
sys 0m4.780s
to:
real 0m0.026s
user 0m0.016s
sys 0m0.020s
Obviously this is an extreme example. The repo is almost
entirely binary files, and you can see that we spent all of
our time asking the kernel to read() the data. However, with
a cold disk cache, even avoiding a few binary files can have
an impact.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is currently no way for users to tell git-grep that a
particular path is or is not a binary file; instead, grep
always relies on its auto-detection (or the user specifying
"-a" to treat all binary-looking files like text).
This patch teaches git-grep to use the same attribute lookup
that is used by git-diff. We could add a new "grep" flag,
but that is unnecessarily complex and unlikely to be useful.
Despite the name, the "-diff" attribute (or "diff=foo" and
the associated diff.foo.binary config option) are really
about describing the contents of the path. It's simply
historical that diff was the only thing that cared about
these attributes in the past.
And if this simple approach turns out to be insufficient, we
still have a backwards-compatible path forward: we can add a
separate "grep" attribute, and fall back to respecting
"diff" if it is unset.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, grep only uses the userdiff_driver for one thing:
looking up funcname patterns for "-p" and "-W". As new uses
for userdiff drivers are added to the grep code, we want to
minimize attribute lookups, which can be expensive.
It might seem at first that this would also optimize multiple
lookups when the funcname pattern for a file is needed
multiple times. However, the compiled funcname pattern is
already cached in struct grep_opt's "priv" member, so
multiple lookups are already suppressed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the grep_source interface existed, grep_buffer was
used by two types of callers:
1. Ones which pulled a file into a buffer, and then wanted
to supply the file's name for the output (i.e.,
git grep).
2. Ones which really just wanted to grep a buffer (i.e.,
git log --grep).
Callers in set (1) should now be using grep_source. Callers
in set (2) always pass NULL for the "name" parameter of
grep_buffer. We can therefore get rid of this now-useless
parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main interface to the low-level grep code is
grep_buffer, which takes a pointer to a buffer and a size.
This is convenient and flexible (we use it to grep commit
bodies, files on disk, and blobs by sha1), but it makes it
hard to pass extra information about what we are grepping
(either for correctness, like overriding binary
auto-detection, or for optimizations, like lazily loading
blob contents).
Instead, let's encapsulate the idea of a "grep source",
including the buffer, its size, and where the data is coming
from. This is similar to the diff_filespec structure used by
the diff code (unsurprising, since future patches will
implement some of the same optimizations found there).
The diffstat is slightly scarier than the actual patch
content. Most of the modified lines are simply replacing
access to raw variables with their counterparts that are now
in a "struct grep_source". Most of the added lines were
taken from builtin/grep.c, which partially abstracted the
idea of grep sources (for file vs sha1 sources).
Instead of dropping the now-redundant code, this patch
leaves builtin/grep.c using the traditional grep_buffer
interface (which now wraps the grep_source interface). That
makes it easy to test that there is no change of behavior
(yet).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The multi-threaded git-grep code needs to serialize access
to the thread-unsafe read_sha1_file call. It does this with
a mutex that is local to builtin/grep.c.
Let's instead push this down into grep.c, where it can be
used by both builtin/grep.c and grep.c. This will let us
safely teach the low-level grep.c code tricks that involve
reading from the object db.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level grep code traditionally didn't care about
threading, as it doesn't do any threading itself and didn't
call out to other non-thread-safe code. That changed with
0579f91 (grep: enable threading with -p and -W using lazy
attribute lookup, 2011-12-12), which pushed the lookup of
funcname attributes (which is not thread-safe) into the
low-level grep code.
As a result, the low-level code learned about a new global
"grep_attr_mutex" to serialize access to the attribute code.
A multi-threaded caller (e.g., builtin/grep.c) is expected
to initialize the mutex and set "use_threads" in the
grep_opt structure. The low-level code only uses the lock if
use_threads is set.
However, putting the use_threads flag into the grep_opt
struct is not the most logical place. Whether threading is
in use is not something that matters for each call to
grep_buffer, but is instead global to the whole program
(i.e., if any thread is doing multi-threaded grep, every
other thread, even if it thinks it is doing its own
single-threaded grep, would need to use the locking). In
practice, this distinction isn't a problem for us, because
the only user of multi-threaded grep is "git-grep", which
does nothing except call grep.
This patch turns the opt->use_threads flag into a global
flag. More important than the nit-picking semantic argument
above is that this means that the locking functions don't
need to actually have access to a grep_opt to know whether
to lock. Which in turn can make adding new locks simpler, as
we don't need to pass around a grep_opt.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lazily load the userdiff attributes in match_funcname(). Use a
separate mutex around this loading to protect the (not thread-safe)
attributes machinery. This lets us re-enable threading with -p and
-W while reducing the overhead caused by looking up attributes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-grep avoids loading the funcname patterns unless they are needed.
ba8ea74 (grep: add option to show whole function as context,
2011-08-01) forgot to extend this test also to the new funcbody
feature. Do so.
The catch is that we also have to disable threading when using
userdiff, as explained in grep_threads_ok(). So we must be careful to
introduce the same test there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fk/use-kwset-pickaxe-grep-f:
obstack: Fix portability issues
Use kwset in grep
Use kwset in pickaxe
Adapt the kwset code to Git
Add string search routines from GNU grep
Add obstack.[ch] from EGLIBC 2.10
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option, -W, to show the whole surrounding function of a match.
It uses the same regular expressions as -p and diff to find the beginning
of sections.
Currently it will not display comments in front of a function, but those
that are following one. Despite this shortcoming it is already useful,
e.g. to simply see a more complete applicable context or to extract whole
functions.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --heading, the filename is printed once before matches from that
file instead of at the start of each line, giving more screen space to
the actual search results.
This option is taken from ack (http://betterthangrep.com/). And now
git grep can dress up like it:
$ git config alias.ack "grep --break --heading --line-number"
$ git ack -e --heading
Documentation/git-grep.txt
154:--heading::
t/t7810-grep.sh
785:test_expect_success 'grep --heading' '
786: git grep --heading -e char -e lo_w hello.c hello_world >actual &&
808: git grep --break --heading -n --color \
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --break, an empty line is printed between matches from different
files, increasing readability. This option is taken from ack
(http://betterthangrep.com/).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 431d6e7b (grep: enable threading for context line printing)
split the printing of the "--\n" mark between results from different
files out into two places: show_line() in grep.c for the non-threaded
case and work_done() in builtin/grep.c for the threaded case. Commit
55f638bd (grep: Colorize filename, line number, and separator) updated
the former, but not the latter, so the separators between files are
not colored if threads are used.
This patch merges the two. In the threaded case, hunk marks are now
printed by show_line() for every file, including the first one, and the
very first mark is simply skipped in work_done(). This ensures that the
output is properly colored and works just as well.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-grep the --perl-regexp/-P options (naming
borrowed from GNU grep) in order to allow specifying PCRE regexes on the
command line.
PCRE has a number of features which make them more handy to use than
POSIX regexes, like consistent escaping rules, extended character
classes, ungreedy matching etc.
git isn't build with PCRE support automatically. USE_LIBPCRE environment
variable must be enabled (like `make USE_LIBPCRE=YesPlease`).
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies compile_regexp() a little and allows re-using error
handling code.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both match_one_pattern() and look_ahead() use fixmatch() and regmatch()
in the same way. They really want to match a pattern againt a string,
but now they need to know if the pattern is fixed or regexp.
This change cleans this up by introducing patmatch() (from "pattern
match") and also simplifies inserting other ways of matching a string.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the olden days,
log --author=me --committer=him --grep=this --grep=that
used to be turned into:
(OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(PATTERN this)
(PATTERN that))
showing my patches that do not have any "this" nor "that", which was
totally useless.
80235ba ("log --author=me --grep=it" should find intersection, not union,
2010-01-17) improved it greatly to turn the same into:
(ALL-MATCH
(HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR (PATTERN this) (PATTERN that)))
That is, "show only patches by me and committed by him, that have either
this or that", which is a lot more natural thing to ask.
We however need to be a bit more clever when the user asks more than one
"author" (or "committer"); because a commit has only one author (and one
committer), they ought to be interpreted as asking for union to be useful.
The current implementation simply added another author/committer pattern
at the same top-level for ALL-MATCH to insist on matching all, finding
nothing.
Turn
log --author=me --author=her \
--committer=him --committer=you \
--grep=this --grep=that
into
(ALL-MATCH
(OR (HEADER-AUTHOR me) (HEADER-AUTHOR her))
(OR (HEADER-COMMITTER him) (HEADER-COMMITTER you))
(OR (PATTERN this) (PATTERN that)))
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callers should be queuing only GREP_PATTERN_HEAD elements to the
header_list queue; simplify the switch and guard it with an assert.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Search patterns in a file specified with -f can contain NUL characters.
The current code ignores all characters on a line after a NUL.
Pass the actual length of the line all the way from the pattern file to
fixmatch() and use it for case-sensitive fixed string matching.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor REG_STARTEND handling inlook_ahead() into a new helper,
regmatch(), and use it for line matching, too. This allows regex
matching beyond NUL characters if regexec() supports the flag. NUL
characters themselves are not matched in any way, though.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions for C strings, like strcasestr(), can't see beyond NUL
characters. Check if there is such an obstacle on the line and try
again behind it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow searching beyond NUL characters by using memmem() instead of
strstr().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the option -c/--count, git grep with the option -l/--name-only
should work the same with binary files as with text files because
there is no danger of messing up the terminal with control characters
from the contents of matching files. GNU grep does the same.
Move the check for ->name_only before the one for binary_match_only,
thus making the latter irrelevant for git grep -l.
Reported-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent of showing the message "Binary file xyz matches" for
binary files is to avoid annoying users by potentially messing up
their terminals by printing control characters. In --count mode,
this precaution isn't necessary.
Display counts of matches if -c/--count was specified, even if -a
was not given. GNU grep does the same.
Moving the check for ->count before the code for handling binary
file also avoids printing context lines if --count and -[ABC] were
used together, so we can remove the part of the comment that
mentions this behaviour. Again, GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turn the switch inside-out and add labels for each possible value
of ->binary. This makes the code easier to read and avoids calling
buffer_is_binary() if the option -a was given.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ml/color-grep:
grep: Colorize selected, context, and function lines
grep: Colorize filename, line number, and separator
Add GIT_COLOR_BOLD_* and GIT_COLOR_BG_*
If context lines are to be printed, grep separates them with hunk marks
("--\n"). These marks are printed between matches from different files,
too. They are not printed before the first file, though.
Threading was disabled when context line printing was enabled because
avoiding to print the mark before the first line was an unsolved
synchronisation problem. This patch separates the code for printing
hunk marks for the threaded and the unthreaded case, allowing threading
to be turned on together with the common -ABC options.
->show_hunk_mark, which controls printing of hunk marks between files in
show_line(), is now set in grep_buffer_1(), but only if some results
have already been printed and threading is disabled. The threaded case
is handled in work_done().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Colorize non-matching text of selected lines, context lines, and
function name lines. The default for all three is no color, but they
can be configured using color.grep.<slot>. The first two are similar
to the corresponding options in GNU grep, except that GNU grep applies
the color to the entire line, not just non-matching text.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Colorize the filename, line number, and separator in git grep output, as
GNU grep does. The colors are customizable through color.grep.<slot>.
The default is to only color the separator (in cyan), since this gives
the biggest legibility increase without overwhelming the user with
colors. GNU grep also defaults cyan for the separator, but defaults to
magenta for the filename and to green for the line number, as well.
There is one difference from GNU grep: When a binary file matches
without -a, GNU grep does not color the <file> in "Binary file <file>
matches", but we do.
Like GNU grep, if --null is given, the null separators are not colored.
For config.txt, use a a sub-list to describe the slots, rather than
a single paragraph with parentheses, since this is much more readable.
Remove the cast to int for `rm_eo - rm_so` since it is not necessary.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 885d211e, the value of the ->fixed pattern option only depends on
the grep option of the same name. Regex flags don't matter any more,
because fixed mode and regex mode are strictly separated. Thus we can
simply copy the value from struct grep_opt to struct grep_pat, as we do
already for ->word_regexp and ->ignore_case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
BSD and glibc have an extension to regexec which takes a buffer + length pair
instead of a NUL-terminated string. Since we already have the length computed
this can save us a strlen call inside regexec.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git grep use threads when it is available.
The results below are best of five runs in the Linux repository (on a
box with two cores).
With the patch:
git grep qwerty
1.58user 0.55system 0:01.16elapsed 183%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+5774minor)pagefaults 0swaps
Without:
git grep qwerty
1.59user 0.43system 0:02.02elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+3716minor)pagefaults 0swaps
And with a pattern with quite a few matches:
With the patch:
$ /usr/bin/time git grep void
5.61user 0.56system 0:03.44elapsed 179%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+5587minor)pagefaults 0swaps
Without:
$ /usr/bin/time git grep void
5.36user 0.51system 0:05.87elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+3693minor)pagefaults 0swaps
In either case we gain about 40% by the threading.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, any grep filter in "git log" family of commands were taken
as restricting to commits with any of the words in the commit log message.
However, the user almost always want to find commits "done by this person
on that topic". With "--all-match" option, a series of grep patterns can
be turned into a requirement that all of them must produce a match, but
that makes it impossible to ask for "done by me, on either this or that"
with:
log --author=me --committer=him --grep=this --grep=that
because it will require both "this" and "that" to appear.
Change the "header" parser of grep library to treat the headers specially,
and parse it as:
(all-match-OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR
(PATTERN this)
(PATTERN that) ) )
Even though the "log" command line parser doesn't give direct access to
the extended grep syntax to group terms with parentheses, this change will
cover the majority of the case the users would want.
This incidentally revealed that one test in t7002 was bogus. It ran:
log --author=Thor --grep=Thu --format='%s'
and expected (wrongly) "Thu" to match "Thursday" in the author/committer
date, but that would never match, as the timestamp in raw commit buffer
does not have the name of the day-of-the-week.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when running without the -F (--fixed-strings) option, we checked the
pattern and used fixmatch() codepath when it does not contain any regex
magic. Finding fixed strings with strstr() surely must be faster than
running the regular expression crud.
Not so. It turns out that on some libc implementations, using the
regcomp()/regexec() pair is a lot faster than running strstr() and
strcasestr() the fixmatch() codepath uses. Drop the optimization and use
the fixmatch() codepath only when the user explicitly asked for it with
the -F option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-1.6.4-grep-lookahead:
grep: optimize built-in grep by skipping lines that do not hit
This needs to be an evil merge as fixmatch() changed signature since
5183bf6 (grep: Allow case insensitive search of fixed-strings,
2009-11-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal "grep" engine we use checks for hits line-by-line, instead of
letting the underlying regexec()/fixmatch() routines scan for the first
match from the rest of the buffer. This was a major source of overhead
compared to the external grep.
Introduce a "look-ahead" mechanism to find the next line that would
potentially match by using regexec()/fixmatch() in the remainder of the
text to skip unmatching lines, and use it when the query criteria is
simple enough (i.e. punt for an advanced grep boolean expression like
"lines that have both X and Y but not Z" for now) and we are not running
under "-v" (aka "--invert-match") option.
Note that "-L" (aka "--files-without-match") is not a reason to disable
this optimization. Under the option, we are interested if the file has
any hit at all, and that is what we determine reliably with or without the
optimization.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" currently an error when you combine the -F and -i flags.
This isn't in line with how GNU grep handles it.
This patch allows the simultaneous use of those flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Brian Collins <bricollins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was found a bit too loud to show == separators between the function
headers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out pre context line handling into the new function
show_pre_context() and change the algorithm to rewind by looking for
newline characters and roll forward again, instead of maintaining an
array of line beginnings and ends.
This is slower for hits, but the cost for non-matching lines becomes
zero. Normally, there are far more non-matching lines, so the time
spent in total decreases.
Before this patch (current Linux kernel repo, best of five runs):
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.134s
user 0m1.932s
sys 0m0.196s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m12.059s
user 0m11.837s
sys 0m0.224s
The same with this patch:
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.117s
user 0m1.892s
sys 0m0.228s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m2.986s
user 0m2.696s
sys 0m0.288s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move last_shown into struct grep_opt, to make it available in
show_line(), and then make the function handle the printing of hunk
marks for context lines in a central place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git grep -w ''" dies as soon as it encounters an empty line,
reporting (wrongly) that "regexp returned nonsense". The first hunk of
this patch relaxes the sanity check that is responsible for that,
allowing matches to start at the end.
The second hunk complements it by making sure that empty matches are
rejected if -w was specified, as they are not really words.
GNU grep does the same:
$ echo foo | grep -c ''
1
$ echo foo | grep -c -w ''
0
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
