Now that the shell script hands off to the `bisect--helper` to do
_anything_ (except to show the help), it is but a tiny step to let the
helper implement the actual `git bisect` command instead.
This retires `git-bisect.sh`, concluding a multi-year journey that many
hands helped with, in particular Pranit Bauna, Tanushree Tumane and
Miriam Rubio.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we would like to turn bisect into a builtin by
renaming bisect--helper.
However, there's an oddity that "git bisect log" accepts any number of
arguments and it will just ignore them all.
Let's prepare for the next step by ignoring any arguments passed to
"git bisect--helper log"
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In preparation for making `git bisect` a real built-in, let's prepare
the `bisect--helper` built-in to handle `git bisect--helper good` and
`git bisect--helper bad`, i.e. eliminate the need of `state` subcommand.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In subsequent commits we'll be removing "git-bisect.sh" in favor of
promoting "bisect--helper" to a "bisect" built-in.
In doing that we'll first need to have it support "git bisect--helper
<cmd>" rather than "git bisect--helper --<cmd>", and then finally have
its "-h" output claim to be "bisect" rather than "bisect--helper".
Instead of suffering that churn let's start claiming to be "git
bisect" now. In just a few commits this will be true, and in the
meantime emitting the "wrong" usage information from the helper is a
small price to pay to avoid the churn.
Let's also declare "BUILTIN_*" macros, when we eventually migrate the
sub-commands themselves to parse_options() we'll be able to re-use the
strings. See 0afd556b2e (worktree: define subcommand -h in terms of
command -h, 2022-10-13) for a recent example.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Address a test blindspot, the "log" command is the odd one out because
"git-bisect.sh" ignores any arguments it receives. Let's test both the
exit codes we expect, and the stderr and stdout we're emitting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we will convert the bisect--helper to be builtin
bisect. Let's start by self-identifying it's the real bisect when reporting
error.
This change is safe since 'git bisect--helper' is an implementation
detail, users aren't expected to call 'git bisect--helper'.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Some system never reports negative exit code at all, they reports them
as bigger-than-128 instead. We take extra care for those systems in the
later check for normal 'do_bisect_run' loop.
Let's check it here, too.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Preceding commits fixed output and behavior regressions in
d1bbbe45df (bisect--helper: reimplement `bisect_run` shell function
in C, 2021-09-13), which did not claim to be changing the output of
"git bisect run".
But some of the output it emitted was subjectively better, so once
we've asserted that we're back on v2.29.0 behavior, let's change some
of it back:
- We now quote the arguments again, but omit the first " " when
printing the "running" line.
- Ditto for other cases where we emitted the argument
- We say "found first bad commit" again, not just "run success"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13) reimplemented parts of "git bisect run" in
C it changed the output we emitted so that:
- The "running ..." line was now quoted
- We lost the \n after our output
- We started saying "bisect found ..." instead of "bisect run success"
Arguably some of this is better now, but as d1bbbe45df did not
advocate for changing the output, let's revert this for now. It'll be
easy to change it back if that's what we'd prefer.
This does not change the one remaining use of "command.buf" to emit
the quoted argument, as that's new in d1bbbe45df.
Some of these cases were not tested for in the tests added in the
preceding commit, I didn't have time to fleshen those out, but a look
at f1de981e8b will show that the other output being adjusted here is
now equivalent to what it was before d1bbbe45df.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
We didn't add "{}" to all "if/else" branches, and one "error" was
mis-indented. Let's fix that first, which makes subsequent commits
smaller. In the case of the "if" we can simply early return instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add three failing tests which succeed on v2.29.0, but due to the topic
merged at [1] (specifically [2]) have been failing since then. We'll
address those regressions in subsequent commits.
There was also a "regression" where:
git bisect run ./missing-script.sh
Would count a non-existing script as "good", as the shell would exit
with 127. That edge case is a bit too insane to preserve, so let's not
add it to these regression tests.
There was another regression that 'git bisect' consumed some options
that was meant to passed down to program run with 'git bisect run'.
Since that regression is breaking user's expectation, it has been fixed
earlier without this patch queued.
1. 0a4cb1f1f2 (Merge branch 'mr/bisect-in-c-4', 2021-09-23)
2. d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
* dd/bisect-helper-subcommand:
bisect--helper: parse subcommand with OPT_SUBCOMMAND
bisect--helper: move all subcommands into their own functions
bisect--helper: remove unused options
As of it is, we're parsing subcommand with OPT_CMDMODE, which will
continue to parse more options even if the command has been found.
When we're running "git bisect run" with a command that expecting
a "--log" or "--no-log" arguments, or one of those "--bisect-..."
arguments, bisect--helper may mistakenly think those options are
bisect--helper's option.
We may fix those problems by passing "--" when calling from
git-bisect.sh, and skip that "--" in bisect--helper. However, it may
interfere with user's "--".
Let's parse subcommand with OPT_SUBCOMMAND since that API was born for
this specific use-case.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
In a later change, we will use OPT_SUBCOMMAND to parse sub-commands to
avoid consuming non-option opts.
Since OPT_SUBCOMMAND needs a function pointer to operate,
let's move it now.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
'git-bisect.sh' used to have a 'bisect_next_check' to check if we have
both good/bad, old/new terms set or not. In commit 129a6cf344
(bisect--helper: `bisect_next_check` shell function in C, 2019-01-02),
a subcommand for bisect--helper was introduced to port the check to C.
Since d1bbbe45df (bisect--helper: reimplement `bisect_run` shell
function in C, 2021-09-13), all users of 'bisect_next_check' was
re-implemented in C, this subcommand was no longer used but we forgot
to remove '--bisect-next-check'.
'git-bisect.sh' also used to have a 'bisect_write' function, whose
third positional parameter was a "nolog" flag. This flag was only used
when 'bisect_start' invoked 'bisect_write' to write the starting good
and bad revisions. Then 0f30233a11 (bisect--helper: `bisect_write`
shell function in C, 2019-01-02) ported it to C as a command mode of
'bisect--helper', which (incorrectly) added the '--no-log' option,
and convert the only place ('bisect_start') that call 'bisect_write'
with 'nolog' to 'git bisect--helper --bisect-write' with 'nolog'
instead of '--no-log', since 'bisect--helper' has command modes not
subcommands, all other command modes see and handle that option as well.
This bogus state didn't last long, however, because in the same patch
series 06f5608c14 (bisect--helper: `bisect_start` shell function
partially in C, 2019-01-02) the C reimplementation of bisect_start()
started calling the bisect_write() C function, this time with the
right 'nolog' function parameter. From then on there was no need for
the '--no-log' option in 'bisect--helper'. Eventually all bisect
subcommands were ported to C as 'bisect--helper' command modes, each
calling the bisect_write() C function instead, but when the
'--bisect-write' command mode was removed in 68efed8c8a
(bisect--helper: retire `--bisect-write` subcommand, 2021-02-03) it
forgot to remove that '--no-log' option.
'--no-log' option had never been used and it's unused now.
Let's remove --bisect-next-check and --no-log from option parsing.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When chainlint detects problems in a test, it prints out the name of the
test script, the name of the problematic test, and a copy of the test
definition with "?!FOO?!" annotations inserted at the locations where
problems were detected. Taken together this information is sufficient
for the test author to identify the problematic code in the original
test definition. However, in a lengthy script or a lengthy test
definition, the author may still end up using the editor's search
feature to home in on the exact problem location.
To further assist the test author, display line numbers along with the
annotated test definition, thus allowing the author to jump directly to
each problematic line.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When chainlint detects problems in a test, it prints out the name of the
test script, the name of the problematic test, and a copy of the test
definition with "?!FOO?!" annotations inserted at the locations where
problems were detected. Taken together this information is sufficient
for the test author to identify the problematic code in the original
test definition. However, in a lengthy script or a lengthy test
definition, the author may still end up using the editor's search
feature to home in on the exact problem location.
To further assist the test author, an upcoming change will display line
numbers along with the annotated test definition, thus allowing the
author to jump directly to each problematic line. As preparation,
upgrade Lexer to latch the line numbers at which each token starts and
ends, and return that information with the token itself.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Although the macOS Terminal.app is "xterm"-compatible, its corresponding
"terminfo" entries -- such as "xterm", "xterm-256color", and
"xterm-new"[1] -- neglect to mention capabilities which Terminal.app
actually supports (such as "dim text"). This oversight on Apple's part
ends up penalizing users of "good citizen" console programs which
consult "terminfo" to tailor their output based upon reported terminal
capabilities (as opposed to programs which assume that the terminal
supports ANSI codes). The same problem is present in other Apple
"terminfo" entries, such as "nsterm"[2], with which macOS Terminal.app
may be configured.
Sidestep this Apple problem by imbuing get_colors() with specific
knowledge of capabilities common to "xterm" and "nsterm", rather than
trusting "terminfo" to report them correctly. Although hard-coding such
knowledge is ugly, "xterm" support is nearly ubiquitous these days, and
Git itself sets precedence by assuming support for ANSI color codes. For
other terminal types, fall back to querying "terminfo" via `tput` as
usual.
FOOTNOTES
[1] iTerm2 FAQ suggests "xterm-new": https://iterm2.com/faq.html
[2] Neovim documentation recommends terminal type "nsterm" with
Terminal.app: https://neovim.io/doc/user/term.html#terminfo
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The `label` command creates a ref refs/rewritten/<label> that the
`reset` and `merge` commands resolve by calling lookup_label(). That
uses lookup_commit_reference_by_name() to look up the label ref. As
lookup_commit_reference_by_name() uses the dwim rules when looking up
the label it will look for a branch named
refs/heads/refs/rewritten/<label> and return that instead of an error if
the branch exists and the label does not. Fix this by using read_ref()
followed by lookup_commit_object() when looking up labels.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The arguments to the `reset` and `merge` commands may be a label created
with a `label` command or an arbitrary commit name. The `merge` command
uses the lookup_label() function to lookup its arguments but `reset` has
a slightly different version of that function in do_reset(). Reduce this
code duplication by calling lookup_label() from do_reset() as well.
This change improves the behavior of `reset` when the argument is a
tree. Previously `reset` would accept a tree only for the rebase to
fail with
update_ref failed for ref 'HEAD': cannot update ref 'HEAD': trying to write non-commit object da5497437fd67ca928333aab79c4b4b55036ea66 to branch 'HEAD'
Using lookup_label() means do_reset() will now error out straight away
if its argument is not a commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Enable the 'skip_cache_tree_update' option in both 'do_reset()'
('sequencer.c') and 'reset_head()' ('reset.c'). Both of these callers invoke
'prime_cache_tree()' after 'unpack_trees()', so we can remove an unnecessary
cache tree rebuild by skipping 'cache_tree_update()'.
When testing with 'p3400-rebase.sh' and 'p3404-rebase-interactive.sh', the
performance change of this update was negligible, likely due to the
operation being dominated by more expensive operations (like checking out
trees). However, since the change doesn't harm performance, it's worth
keeping this 'unpack_trees()' usage consistent with others that subsequently
invoke 'prime_cache_tree()'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When running 'read-tree' with a single tree and no prefix,
'prime_cache_tree()' is called after the tree is unpacked. In that
situation, skip a redundant call to 'cache_tree_update()' in
'unpack_trees()' by enabling the 'skip_cache_tree_update' unpack option.
Removing the redundant cache tree update provides a substantial performance
improvement to 'git read-tree <tree-ish>', as shown by a test added to
'p0006-read-tree-checkout.sh':
Test before after
----------------------------------------------------------------------
read-tree br_ballast_plus_1 3.94(1.80+1.57) 3.00(1.14+1.28) -23.9%
Note that the 'read-tree' in 't1022-read-tree-partial-clone.sh' is updated
to read two trees, rather than one. The test was first introduced in
d3da223f22 (cache-tree: prefetch in partial clone read-tree, 2021-07-23) to
exercise the 'cache_tree_update()' code path, as used in 'git merge'. Since
this patch drops the call to 'cache_tree_update()' in single-tree 'git
read-tree', change the test to use the two-tree variant so that
'cache_tree_update()' is called as intended.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Enable the 'skip_cache_tree_update' option in the variants that call
'prime_cache_tree()' after 'unpack_trees()' (specifically, 'git reset
--mixed' and 'git reset --hard'). This avoids redundantly rebuilding the
cache tree in both 'cache_tree_update()' at the end of 'unpack_trees()' and
in 'prime_cache_tree()', resulting in a small (but consistent) performance
improvement. From the newly-added 'p7102-reset.sh' test:
Test before after
--------------------------------------------------------------------
7102.1: reset --hard (...) 2.11(0.40+1.54) 1.97(0.38+1.47) -6.6%
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add (disabled by default) option to skip the 'cache_tree_update()' at the
end of 'unpack_trees()'. In many cases, this cache tree update is redundant
because the caller of 'unpack_trees()' immediately follows it with
'prime_cache_tree()', rebuilding the entire cache tree from scratch. While
these operations aren't the most expensive part of operations like 'git
reset', the duplicate calls still create a minor unnecessary slowdown.
Introduce an option for callers to skip the 'cache_tree_update()' in
'unpack_trees()' if it is redundant (that is, if 'prime_cache_tree()' is
called afterwards). At the moment, no 'unpack_trees()' callers use the new
option; they will be updated in subsequent patches.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Add a performance test comparing the execution times of 'prime_cache_tree()'
and 'cache_tree_update(_, WRITE_TREE_SILENT | WRITE_TREE_REPAIR)'. The goal
of comparing these two is to identify which is the faster method for
rebuilding an invalid cache tree, ultimately to remove one when both are
(reundantly) called in immediate succession.
Both methods are fast, so the new tests in 'p0090-cache-tree.sh' must call
each tested function multiple times to ensure the reported times (to 0.01s
resolution) convey the differences between them.
The tests compare the timing of a 'test-tool cache-tree' run as a no-op (to
capture a baseline for the overhead associated with running the tool),
'cache_tree_update()', and 'prime_cache_tree()' on four scenarios:
- A completely valid cache tree
- A cache tree with 2 invalid paths
- A cache tree with 50 invalid paths
- A completely empty cache tree
Example results:
Test this tree
-----------------------------------------------------------
0090.2: no-op, clean 1.27(0.48+0.52)
0090.3: prime_cache_tree, clean 2.02(0.83+0.85)
0090.4: cache_tree_update, clean 1.30(0.49+0.54)
0090.5: no-op, invalidate 2 1.29(0.48+0.54)
0090.6: prime_cache_tree, invalidate 2 1.98(0.81+0.83)
0090.7: cache_tree_update, invalidate 2 2.12(0.94+0.86)
0090.8: no-op, invalidate 50 1.32(0.50+0.55)
0090.9: prime_cache_tree, invalidate 50 2.10(0.86+0.89)
0090.10: cache_tree_update, invalidate 50 2.35(1.14+0.90)
0090.11: no-op, empty 1.33(0.50+0.54)
0090.12: prime_cache_tree, empty 2.04(0.84+0.87)
0090.13: cache_tree_update, empty 2.51(1.27+0.92)
These timings show that, while 'cache_tree_update()' is faster when the
cache tree is completely valid, it is equal to or slower than
'prime_cache_tree()' when there are any invalid paths. Since the redundant
calls are mostly in scenarios where the cache tree will be at least
partially invalid (e.g., 'git reset --hard'), 'prime_cache_tree()' will
likely perform better than 'cache_tree_update()' in typical cases.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When deleting a branch, "git branch -d" has a safety check that ensures
the branch is merged to its upstream (if any), or to HEAD. To do that,
naturally we try to resolve HEAD to a commit object. If we're on an
orphan branch (i.e., HEAD points to a branch that does not yet exist),
that will fail, and we'll bail with an error:
$ git branch -d to-delete
fatal: Couldn't look up commit object for HEAD
This usually isn't that big of a deal. The deletion would fail anyway,
since the branch isn't merged to HEAD, and you'd need to use "-D" (or
"-f"). And doing so skips the HEAD resolution, courtesy of 67affd5173
(git-branch -D: make it work even when on a yet-to-be-born branch,
2006-11-24).
But there are still two problems:
1. The error message isn't very helpful. We should give the usual "not
fully merged" message, which points the user at "branch -D". That
was a problem even back in 67affd5173.
2. Even without a HEAD, these days it's still possible for the
deletion to succeed. After 67affd5173, commit 99c419c915 (branch
-d: base the "already-merged" safety on the branch it merges with,
2009-12-29) made it OK to delete a branch if it is merged to its
upstream.
We can fix both by removing the die() in delete_branches() completely,
leaving head_rev NULL in this case. It's tempting to stop there, as it
appears at first glance that the rest of the code does the right thing
with a NULL. But sadly, it's not quite true.
We end up feeding the NULL to repo_is_descendant_of(). In the
traditional code path there, we call repo_in_merge_bases_many(). It
feeds the NULL to repo_parse_commit(), which is smart enough to return
an error, and we immediately return "no, it's not a descendant".
But there's an alternate code path: if we have a commit graph with
generation numbers, we end up in can_all_from_reach(), which does
eventually try to set a flag on the NULL commit and segfaults.
So instead, we'll teach the local branch_merged() helper to treat a NULL
as "not merged". This would be a little more elegant in in_merge_bases()
itself, but that function is called in a lot of places, and it's not
clear that quietly returning "not merged" is the right thing everywhere
(I'd expect in many cases, feeding a NULL is a sign of a bug).
There are four tests here:
a. The first one confirms that deletion succeeds with an orphaned HEAD
when the branch is merged to its upstream. This is case (2) above.
b. Same, but with commit graphs enabled. Even if it is merged to
upstream, we still check head_rev so that we can say "deleting
because it's merged to upstream, even though it's not merged to
HEAD". Without the second hunk in branch_merged(), this test would
segfault in can_all_from_reach().
c. The third one confirms that we correctly say "not merged to HEAD"
when we can't resolve HEAD, and reject the deletion.
d. Same, but with commit graphs enabled. Without the first hunk in
branch_merged(), this one would segfault.
Reported-by: Martin von Zweigbergk <martinvonz@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
git_parse_signed() checks that the absolute value of the parsed string
is less than or equal to a caller supplied maximum value. When
calculating the absolute value there is a integer overflow if `val ==
INTMAX_MIN`. To fix this avoid negating `val` when it is negative by
having separate overflow checks for positive and negative values.
An alternative would be to special case INTMAX_MIN before negating `val`
as it is always out of range. That would enable us to keep the existing
code but I'm not sure that the current two-stage check is any clearer
than the new version.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
If the input to strtoimax() or strtoumax() does not contain any digits
then they return zero and set `end` to point to the start of the input
string. git_parse_[un]signed() do not check `end` and so fail to return
an error and instead return a value of zero if the input string is a
valid units factor without any digits (e.g "k").
Tests are added to check that 'git config --int' and OPT_MAGNITUDE()
reject a units specifier without a leading digit.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
git_parse_unsigned() relies on strtoumax() which unfortunately parses
negative values as large positive integers. Fix this by rejecting any
string that contains '-' as we do in strtoul_ui(). I've chosen to treat
negative numbers as invalid input and set errno to EINVAL rather than
ERANGE one the basis that they are never acceptable if we're looking for
a unsigned integer. This is also consistent with the existing behavior
of rejecting "1–2" with EINVAL.
As we do not have unit tests for this function it is tested indirectly
by checking that negative values of reject for core.bigFileThreshold are
rejected. As this function is also used by OPT_MAGNITUDE() a test is
added to check that rejects negative values too.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Previously, the example *decreased* the cache timeout compared to the
default, making it less user friendly.
Instead, nudge users to make cache more usable. Many users choose
store over cache.
https://lore.kernel.org/git/CAGJzqskRYN49SeS8kSEN5-vbB_Jt1QvAV9QhS6zNuKh0u8wxPQ@mail.gmail.com/
The default timeout remains 15 minutes. A stronger nudge would
be to increase that.
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Now that struct replay_opts has a reflog_action member we no longer
need to export GIT_REFLOG_ACTION when starting a rebase. If the user
has set GIT_REFLOG_ACTION then we use it when initializing
reflog_action.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Each time it picks a commit the sequencer copies the GIT_REFLOG_ACITON
environment variable so it can temporarily change it and then restore
the previous value. This results in code that is hard to follow and also
leaks memory because (i) we fail to free the copy when we've finished
with it and (ii) each call to setenv() leaks the previous value. Instead
pass the reflog action around in a variable and use it to set
GIT_REFLOG_ACTION in the child environment when running "git commit".
Within the sequencer GIT_REFLOG_ACTION is no longer set and is only read
by sequencer_reflog_action(). It is still set by rebase before calling
the sequencer, that will be addressed in the next commit. cherry-pick
and revert are unaffected as they do not set GIT_REFLOG_ACTION before
calling the sequencer.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When t7610-mergetool.sh runs without failures the git://example.com
submodule URLs will never be used. That's because we "git submodule
add" it, but then manually populate them so that subsequent "git
submodule update -N" won't attempt to clone it, only update it without
fetching.
But if we fail in an earlier test it'll have the knock-on effect of
having later tests hang on that "git submodule update -N" as we
attempt to clone this repository from example.com.
This can be reproduced on "master" by running the test with
SANITIZE=leak without "--immediate". With
"GIT_TEST_PASSING_SANITIZE_LEAK=true" (which the linux-leaks job uses)
we'll skip the test entirely. So we'll only run into this when running
it manually, or with the "GIT_TEST_PASSING_SANITIZE_LEAK=check" mode.
That's not because the failure has anything to do with leak detection
per-se. It just so happens that we have a leak that'll fail before
we've managed to fully set these up, and therefore "git submodule
update -N" ends up spawning "git clone".
Let's instead continue lying about the origin of this submodule by
providing a URL for it that doesn't work, but now one that *really*
doesn't work: /dev/null. If the test is passing we won't ever use
this, and if we have knock-on failures we'll fail early, instead of
waiting for a timeout.
The behavior of "-N" here might be surprising to some, since it's
explained as "[if you use -N we] don’t fetch new objects from the
remote site". But (perhaps counter-intuitively) it's only talking
about if it needs to do so via "git fetch". In this case we'll end up
spawning a "git clone", as we have no submodule set up.
See ff7f089ed1 (mergetool: Teach about submodules, 2011-04-13) for
the commit that implemented these "example.com" tests.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
* es/chainlint-output:
chainlint: annotate original test definition rather than token stream
chainlint: latch start/end position of each token
chainlint: tighten accuracy when consuming input stream
chainlint: add explanatory comments
Simplify the run-command API.
* rs/no-more-run-command-v:
replace and remove run_command_v_opt()
replace and remove run_command_v_opt_cd_env_tr2()
replace and remove run_command_v_opt_tr2()
replace and remove run_command_v_opt_cd_env()
use child_process members "args" and "env" directly
use child_process member "args" instead of string array variable
sequencer: simplify building argument list in do_exec()
bisect--helper: factor out do_bisect_run()
bisect: simplify building "checkout" argument list
am: simplify building "show" argument list
run-command: fix return value comment
merge: remove always-the-same "verbose" arguments
"git archive" mistakenly complained twice about a missing executable,
which has been corrected.
* rs/archive-filter-error-once:
archive-tar: report filter start error only once
A redundant diagnostic message is dropped from test_path_is_missing().
* ma/drop-redundant-diagnostic:
test-lib-functions: drop redundant diagnostic print
Various tests exercising the transfer.credentialsInUrl configuration
are taught to avoid making requests which require resolving localhost
to reduce CI-flakiness.
* jk/ref-filter-parsing-bugs:
ref-filter: fix parsing of signatures with CRLF and no body
ref-filter: fix parsing of signatures without blank lines
The glossary entries for "commit-graph file" and "reachability
bitmap" have been added.
* po/glossary-around-traversal:
glossary: add reachability bitmap description
glossary: add "commit graph" description
doc: use 'object database' not ODB or abbreviation
doc: use "commit-graph" hyphenation consistently
The adjust_shared_perm() helper function learned to refrain from
setting the "g+s" bit on directories when it is not necessary.
* jc/set-gid-bit-less-aggressively:
adjust_shared_perm(): leave g+s alone when the group does not matter
Enable gc.cruftpacks by default for those who opt into
feature.experimental setting.
* es/mark-gc-cruft-as-experimental:
config: let feature.experimental imply gc.cruftPacks=true
gc: add tests for --cruft and friends
Git asks for a "password", but the user might use a
personal access token or OAuth access token instead.
Example:
Password for 'https://AzureDiamond@github.com':
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Resolves a problem where symbolic links were not showing up in diff when
created or modified.
kFSEventStreamEventFlagItemIsSymlink is also treated as a file update.
This is because kFSEventStreamEventFlagItemIsFile is not included in
FSEvents when creating or deleting symbolic links. For example:
$ ln -snf t test
fsevent: '/path/to/dir/test', flags=0x40100 ItemCreated|ItemIsSymlink|
$ ln -snf ci test
fsevent: '/path/to/dir/test', flags=0x40200 ItemIsSymlink|ItemRemoved|
fsevent: '/path/to/dir/test', flags=0x40100 ItemCreated|ItemIsSymlink|
Signed-off-by: srz_zumix <zumix.cpp@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Have the REV_INFO_INIT macro added in [1] declare more members of
"struct rev_info" that we can initialize statically, and have
repo_init_revisions() do so with the memcpy(..., &blank) idiom
introduced in [2].
As the comment for the "REV_INFO_INIT" macro notes this still isn't
sufficient to initialize a "struct rev_info" for use yet. But we are
getting closer to that eventual goal.
Even though we can't fully initialize a "struct rev_info" with
REV_INFO_INIT it's useful for readability to clearly separate those
things that we can statically initialize, and those that we can't.
This change could replace the:
list_objects_filter_init(&revs->filter);
In the repo_init_revisions() with this line, at the end of the
REV_INFO_INIT deceleration in revisions.h:
.filter = LIST_OBJECTS_FILTER_INIT, \
But doing so would produce a minor conflict with an outstanding
topic[3]. Let's skip that for now. I have follow-ups to initialize
more of this statically, e.g. changes to get rid of grep_init(). We
can initialize more members with the macro in a future series.
1. f196c1e908 (revisions API users: use release_revisions() needing
REV_INFO_INIT, 2022-04-13)
2. 5726a6b401 (*.c *_init(): define in terms of corresponding *_INIT
macro, 2021-07-01)
3. https://lore.kernel.org/git/265b292ed5c2de19b7118dfe046d3d9d932e2e89.1667901510.git.ps@pks.im/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The old version we currently use runs in node.js v12.x, which is being
deprecated in GitHub Actions. The new version uses node.js v16.x.
Incidentally, this also avoids the warning about the deprecated
`::set-output::` workflow command because the newer version of the
`github-script` Action uses the recommended new way to specify outputs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When chainlint detects problems in a test, such as a broken &&-chain, it
prints out the test with "?!FOO?!" annotations inserted at each problem
location. However, rather than annotating the original test definition,
it instead dumps out a parsed token representation of the test. Since it
lacks comments, indentations, here-doc bodies, and so forth, this
tokenized representation can be difficult for the test author to digest
and relate back to the original test definition.
However, now that each parsed token carries positional information, the
location of a detected problem can be pinpointed precisely in the
original test definition. Therefore, take advantage of this information
to annotate the test definition itself rather than annotating the parsed
token stream, thus making it easier for a test author to relate a
problem back to the source.
Maintaining the positional meta-information associated with each
detected problem requires a slight change in how the problems are
managed internally. In particular, shell syntax such as:
msg="total: $(cd data; wc -w *.txt) words"
requires the lexical analyzer to recursively invoke the parser in order
to detect problems within the $(...) expression inside the double-quoted
string. In this case, the recursive parse context will detect the broken
&&-chain between the `cd` and `wc` commands, returning the token stream:
cd data ; ?!AMP?! wc -w *.txt
However, the parent parse context will see everything inside the
double-quotes as a single string token:
"total: $(cd data ; ?!AMP?! wc -w *.txt) words"
losing whatever positional information was attached to the ";" token
where the problem was detected.
One way to preserve the positional information of a detected problem in
a recursive parse context within a string would be to attach the
positional information to the annotation textually; for instance:
"total: $(cd data ; ?!AMP:21:22?! wc -w *.txt) words"
and then extract the positional information when annotating the original
test definition.
However, a cleaner and much simpler approach is to maintain the list of
detected problems separately rather than embedding the problems as
annotations directly in the parsed token stream. Not only does this
ensure that positional information within recursive parse contexts is
not lost, but it keeps the token stream free from non-token pollution,
which may simplify implementation of validations added in the future
since they won't have to handle non-token "?!FOO!?" items specially.
Finally, the chainlint self-test "expect" files need a few mechanical
adjustments now that the original test definitions are emitted rather
than the parsed token stream. In particular, the following items missing
from the historic parsed-token output are now preserved verbatim:
* indentation (and whitespace, in general)
* comments
* here-doc bodies
* here-doc tag quoting (i.e. "\EOF")
* line-splices (i.e. "\" at the end of a line)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When chainlint detects problems in a test, such as a broken &&-chain, it
prints out the test with "?!FOO?!" annotations inserted at each problem
location. However, rather than annotating the original test definition,
it instead dumps out a parsed token representation of the test. Since it
lacks comments, indentations, here-doc bodies, and so forth, this
tokenized representation can be difficult for the test author to digest
and relate back to the original test definition.
To address this shortcoming, an upcoming change will make it print out
an annotated copy of the original test definition rather than the
tokenized representation. In order to do so, it will need to know the
start and end positions of each token in the original test definition.
As preparation, upgrade TestParser::scan_token() to latch the start and
end position of the token being scanned, and return that information
along with the token itself. A subsequent change will take advantage of
this positional information.
In terms of implementation, TestParser::scan_token() is retrofitted to
return a tuple consisting of the token's lexeme and its start and end
positions, rather than returning just the lexeme. However, an
alternative would be to define a class which represents a token:
package Token;
sub new {
my ($class, $lexeme, $start, $end) = @_;
bless [$lexeme, $start, $end] => $class;
}
sub as_string {
my $self = shift @_;
return $self->[0];
}
sub compare {
my ($x, $y) = @_;
if (UNIVERSAL::isa($y, 'Token')) {
return $x->[0] cmp $y->[0];
}
return $x->[0] cmp $y;
}
use overload (
'""' => 'as_string',
'cmp' => 'compare'
);
The major benefit of the class-based approach is that it is entirely
non-invasive; it requires no additional changes to the rest of the
script since a Token converts automatically to a string, which is what
scan_token() historically returned.
The big downside to the Token approach, however, is that it is _slow_;
on this developer's (old) machine, it increases user-time by an
unacceptable seven seconds when scanning all test scripts in the
project. Hence, the simple tuple approach is employed instead since it
adds only a fraction of a second user-time.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
