Includes the addition of some new defines and their description for others to use.
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code uses setitimer() only for reducing perceived
latency. On platforms that lack setitimer() (e.g. HP NonStop),
allow builders to say "make NO_SETITIMER=YesPlease" to use a no-op
substitute, as doing so would not affect correctness.
HP NonStop does provide struct itimerval, but other platforms may
not, so this is taken care of in this commit too, by setting
NO_STRUCT_ITIMERVAL.
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking for $HOME/.gitconfig etc., it is OK if we cannot read
them because they do not exist, but we did not diagnose existing
files that we cannot read.
* jk/config-warn-on-inaccessible-paths:
warn_on_inaccessible(): a helper to warn on inaccessible paths
attr: warn on inaccessible attribute files
gitignore: report access errors of exclude files
config: warn on inaccessible files
Introduce a compatibility helper for platforms with such a mkdir().
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous series introduced warnings to multiple places, but it
could become tiring to see the warning on the same path over and
over again during a single run of Git. Making just one function
responsible for issuing this warning, we could later choose to keep
track of which paths we issued a warning (it would involve a hash
table of paths after running them through real_path() or something)
in order to reduce noise.
Right now we do not know if the noise reduction is necessary, but it
still would be a good code reduction/sharing anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before reading a config file, we check "!access(path, R_OK)"
to make sure that the file exists and is readable. If it's
not, then we silently ignore it.
For the case of ENOENT, this is fine, as the presence of the
file is optional. For other cases, though, it may indicate a
configuration error (e.g., not having permissions to read
the file). Let's print a warning in these cases to let the
user know.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getpwuid fails, we give a cute but cryptic message.
While it makes sense if you know that getpwuid or identity
functions are being called, this code is triggered behind
the scenes by quite a few git commands these days (e.g.,
receive-pack on a remote server might use it for a reflog;
the current message is hard to distinguish from an
authentication error). Let's switch to something that gives
a little more context.
While we're at it, we can factor out all of the
cut-and-pastes of the "you don't exist" message into a
wrapper function. Rather than provide xgetpwuid, let's make
it even more specific to just getting the passwd entry for
the current uid. That's the only way we use getpwuid anyway,
and it lets us make an even more specific error message.
The current message also fails to mention errno. While the
usual cause for getpwuid failing is that the user does not
exist, mentioning errno makes it easier to diagnose these
problems. Note that POSIX specifies that errno remain
untouched if the passwd entry does not exist (but will be
set on actual errors), whereas some systems will return
ENOENT or similar for a missing entry. We handle both cases
in our wrapper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
In particular, sparse complains as follows:
SP ctype.c
ctype.c:30:12: warning: symbol 'tolower_trans_tbl' was not declared.\
Should it be static?
An appropriate extern declaration for the 'tolower_trans_tbl' symbol
is included in the "cache.h" header file. In order to suppress the
warning, therefore, we could replace the "git-compat-util.h" header
inclusion with "cache.h", since "cache.h" includes "git-compat-util.h"
in turn. Here, however, we choose to move the extern declaration for
'tolower_trans_tbl' into "git-compat-util.h", alongside the other
extern declaration from ctype.c for 'sane_ctype'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"perf" uses a the forked copy of this file, and wants to use these two
macros.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/credentials:
t: add test harness for external credential helpers
credentials: add "store" helper
strbuf: add strbuf_add*_urlencode
Makefile: unix sockets may not available on some platforms
credentials: add "cache" helper
docs: end-user documentation for the credential subsystem
credential: make relevance of http path configurable
credential: add credential.*.username
credential: apply helper config
http: use credential API to get passwords
credential: add function for parsing url components
introduce credentials API
t5550: fix typo
test-lib: add test_config_global variant
Conflicts:
strbuf.c
If you access repositories over smart-http using http
authentication, then it can be annoying to have git ask you
for your password repeatedly. We cache credentials in
memory, of course, but git is composed of many small
programs. Having to input your password for each one can be
frustrating.
This patch introduces a credential helper that will cache
passwords in memory for a short period of time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one introduced an implementation of the function, but forgot
to add a declaration.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not include header files when compiling with MSVC that do not
exist and which are also not included when compiling with MINGW.
A direct consequence is that git can be compiled again with MSVC
because the missing "sys/resources.h" is no longer included.
Instead of current
#ifndef mingw32 is the only one that is strange
... everything for systems that is not strange ...
#else
... include mingw specific tweaks ...
#endif
#ifdef msvc is also strange
... include msvc specific tweaks ...
#endif
it turns things around and says what it wants to achieve in a more direct
way, i.e.
#if mingw32
#include "compat/mingw.h"
#elif msvc
#include "compat/msvc.h"
#else
... all the others ...
#endif
which makes it a lot simpler.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new process's error output may be redirected elsewhere, but if
the exec fails, output should still go to the parent's stderr. This
has already been done for the die_routine. Do the same for
error_routine.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/gcc46-profile-feedback:
Add explanation of the profile feedback build to the README
Add profile feedback build to git
Add option to disable NORETURN
* ef/maint-win-verify-path:
verify_dotfile(): do not assume '/' is the path seperator
verify_path(): simplify check at the directory boundary
verify_path: consider dos drive prefix
real_path: do not assume '/' is the path seperator
A Windows path starting with a backslash is absolute
Due to a bug in gcc 4.6+ it can crash when doing profile feedback
with a noreturn function pointer
(http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49299)
This adds a Makefile variable to disable noreturns.
[Patch by Junio, description by Andi Kleen]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
real_path currently assumes it's input had '/' as path seperator.
This assumption does not hold true for the code-path from
prefix_path (on Windows), where real_path can be called before
normalize_path_copy.
Fix real_path so it doesn't make this assumption. Create a helper
function to reverse-search for the last path-seperator in a string.
Signed-off-by: Theo Niessink <theo@taletn.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/magic-pathspec:
setup.c: Fix some "symbol not declared" sparse warnings
t3703: Skip tests using directory name ":" on Windows
revision.c: leave a note for "a lone :" enhancement
t3703, t4208: add test cases for magic pathspec
rev/path disambiguation: further restrict "misspelled index entry" diag
fix overslow :/no-such-string-ever-existed diagnostics
fix overstrict :<path> diagnosis
grep: use get_pathspec() correctly
pathspec: drop "lone : means no pathspec" from get_pathspec()
Revert "magic pathspec: add ":(icase)path" to match case insensitively"
magic pathspec: add ":(icase)path" to match case insensitively
magic pathspec: futureproof shorthand form
magic pathspec: add tentative ":/path/from/top/level" pathspec support
The earlier design was to take whatever non-alnum that the short format
parser happens to support, leaving the rest as part of the pattern, so a
version of git that knows '*' magic and a version that does not would have
behaved differently when given ":*Makefile". The former would have
applied the '*' magic to the pattern "Makefile", while the latter would
used no magic to the pattern "*Makefile".
Instead, just reserve all non-alnum ASCII letters that are neither glob
nor regexp special as potential magic signature, and when we see a magic
that is not supported, die with an error message, just like the longhand
codepath does.
With this, ":%#!*Makefile" will always mean "%#!" magic applied to the
pattern "*Makefile", no matter what version of git is used (it is a
different matter if the version of git supports all of these three magic
matching rules).
Also make ':' without anything else to mean "there is no pathspec". This
would allow differences between "git log" and "git log ." run from the top
level of the working tree (the latter simplifies no-op commits away from
the history) to be expressed from a subdirectory by saying "git log :".
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with commit c793430 (Limit file descriptors used by packs,
2011-02-28), git uses getrlimit to tell how many file descriptors it
can use. Unfortunately it does not include the header declaring that
function, resulting in compilation errors:
sha1_file.c: In function 'open_packed_git_1':
sha1_file.c:718: error: storage size of 'lim' isn't known
sha1_file.c:721: warning: implicit declaration of function 'getrlimit'
sha1_file.c:721: error: 'RLIMIT_NOFILE' undeclared (first use in this function)
sha1_file.c:718: warning: unused variable 'lim'
The standard header to include for this is <sys/resource.h> (which on
some systems itself requires declarations from <sys/types.h> or
<sys/time.h>). Probably the problem was missed until now because in
current glibc sys/resource.h happens to be included by sys/wait.h.
MinGW does not provide sys/resource.h (and compat/mingw takes care of
providing getrlimit some other way), so add the missing #include to
the "#ifndef __MINGW32__" block in git-compat-util.h.
Reported-by: Stefan Sperling <stsp@stsp.name>
Tested-by: Stefan Sperling <stsp@stsp.name> [on OpenBSD]
Tested-by: Arnaud Lacombe <lacombar@gmail.com> [on FreeBSD 8]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since an obvious implementation of va_list is to make it a pointer
into the stack frame, implementing va_copy as "dst = src" will work on
many systems. Platforms that use something different (e.g., a size-1
array of structs, to be assigned with *(dst) = *(src)) will need some
other compatibility macro, though.
Luckily, as the glibc manual hints, such systems tend to provide the
__va_copy macro (introduced in GCC in March, 1997). By using that if
it is available, we can cover our bases pretty well.
Discovered by building with CC="gcc -std=c89" on an amd64 machine:
$ make CC=c89 strbuf.o
[...]
strbuf.c: In function 'strbuf_vaddf':
strbuf.c:211:2: error: incompatible types when assigning to type 'va_list'
from type 'struct __va_list_tag *'
make: *** [strbuf.o] Error 1
Explained-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HP C for Integrity servers (Itanium) gained support for noreturn
attribute sometime in 2006. It was released in Compiler Version
A.06.10 and made available in July 2006.
The __HP_cc define detects the HP C compiler version. Precede the
__GNUC__ check so it works well when compiling with HP C using -Agcc
option that enables partial support for the GNU C dialect. The -Agcc
defines the __GNUC__ too.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
va_copy is C99. We have avoided using va_copy many times in the past,
which has led to a bunch of cut-and-paste. From everything I found
searching the web, implementations have historically either provided
va_copy or just let your code assume that simple assignment of worked.
So my guess is that this will be sufficient, though we won't really
know for sure until somebody reports a problem.
Signed-off-by: Jeff King <peff@peff.net>
Improved-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idiom (a + b < a) works fine for detecting that an unsigned
integer has overflowed, but a more explicit
unsigned_add_overflows(a, b)
might be easier to read.
Define such a macro, expanding roughly to ((a) < UINT_MAX - (b)).
Because the expansion uses each argument only once outside of sizeof()
expressions, it is safe to use with arguments that have side effects.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
The odb_mkstemp and odb_pack_keep functions open files under the
$GIT_OBJECT_DIRECTORY directory. This requires access to the git
configuration which very simple programs do not need.
Move these functions to environment.o, closer to their dependencies.
This should make it easier for programs to link to wrapper.o without
linking to environment.o.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows doesn't have inet_pton and inet_ntop, so
add prototypes in git-compat-util.h for them.
At the same time include git-compat-util.h in
the sources for these functions, so they use the
network-wrappers from there on Windows.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Syslog does not usually exist on Windows, so implement our own using
Window's ReportEvent mechanism.
Strings containing "%1" gets expanded into them selves by ReportEvent,
resulting in an unreadable string. "%2" and above is not a problem.
Unfortunately, on Windows an IPv6 address can contain "%1", so expand
"%1" to "% 1" before reporting. "%%1" is also a problem for ReportEvent,
but that string cannot occur in an IPv6 address.
Signed-off-by: Mike Pape <dotzenlabs@gmail.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* add required build options to Makefile.
* introduce new NO_INTTYPES_H for systems lacking inttypes; code
includes stdint.h instead, if this is set.
* introduce new NO_SYS_POLL_H for systems lacking sys/poll.h; code
includes poll.h instead, if this is set.
* introduce NO_INITGROUPS. initgroups() call is simply omitted.
Signed-off-by: Markus Duft <mduft@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed integer overflow is not defined in C, so do not depend on it.
This fixes a problem with GCC 4.4.0 and -O3 where the optimizer would
consider "consumed_bytes > consumed_bytes + bytes" as a constant
expression, and never execute the die()-call.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, on systems that define uint32_t as an unsigned long,
gcc complains as follows:
CC vcs-svn/fast_export.o
vcs-svn/fast_export.c: In function `fast_export_modify':
vcs-svn/fast_export.c:28: warning: unsigned int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:28: warning: int format, uint32_t arg (arg 3)
vcs-svn/fast_export.c: In function `fast_export_commit':
vcs-svn/fast_export.c:42: warning: int format, uint32_t arg (arg 5)
vcs-svn/fast_export.c:62: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c: In function `fast_export_blob':
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 2)
vcs-svn/fast_export.c:72: warning: int format, uint32_t arg (arg 3)
CC vcs-svn/svndump.o
vcs-svn/svndump.c: In function `svndump_read':
vcs-svn/svndump.c:260: warning: int format, uint32_t arg (arg 3)
In order to suppress the warnings we use the C99 format specifier
macros PRIo32 and PRIu32 from <inttypes.h>.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/svn-fe:
t/t9010-svn-fe.sh: add an +x bit to this test
t9010 (svn-fe): avoid symlinks in test
t9010 (svn-fe): use Unix-style path in URI
vcs-svn: Avoid %z in format string
vcs-svn: Rename dirent pool to build on Windows
compat: add strtok_r()
treap: style fix
vcs-svn: remove build artifacts on "make clean"
svn-fe manual: Clarify warning about deltas in dump files
Update svn-fe manual
SVN dump parser
Infrastructure to write revisions in fast-export format
Add stream helper library
Add string-specific memory pool
Add treap implementation
Add memory pool library
Introduce vcs-svn lib
Windows does not have strtok_r (and while it does have an identical
strtok_s, but it is not obvious how to use it). Grab an
implementation from glibc.
The svn-fe tool uses strtok_r to parse paths.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempting to mmap (via git-add or similar) a file larger than 4GB on
32-bit Linux systems results in a repository that has only the file
modulo 4GB stored, because of truncation of the off_t file size to a
size_t for mmap.
When xsize_t was introduced to handle this truncation in dc49cd7 (Cast
64 bit off_t to 32 bit size_t, 2007-03-06), Shawn even pointed out
that it should detect when such a cutoff happens.
Make it so.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/async-thread:
fast-import: die_nicely() back to vsnprintf (reverts part of ebaa79f)
Enable threaded async procedures whenever pthreads is available
Dying in an async procedure should only exit the thread, not the process.
Reimplement async procedures using pthreads
Windows: more pthreads functions
Fix signature of fcntl() compatibility dummy
Make report() from usage.c public as vreportf() and use it.
Modernize t5530-upload-pack-error.
Conflicts:
http-backend.c
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
* js/try-to-free-stackable:
Do not call release_pack_memory in malloc wrappers when GIT_TRACE is used
Have set_try_to_free_routine return the previous routine
* maint:
git-compat-util.h: use apparently more common __sgi macro to detect SGI IRIX
Documentation: A...B shortcut for checkout and rebase
Documentation/pretty-{formats,options}: better reference for "format:<string>"
IRIX 6.5.26m does not define the 'sgi' macro, but it does define an '__sgi'
macro. Since later IRIX versions (6.5.29m) define both macros, and since
an underscore prefixed macro is preferred anyway, use '__sgi' to detect
compilation on SGI IRIX.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms with mmap() lack MAP_FAILED definition.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
This effectively requires from the callers of set_try_to_free_routine to
treat the try-to-free-routines as a stack.
We will need this for the next patch where the only current caller cannot
depend on that the previously set routine was the default routine.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default executable path list used by exec_cmd.c is hard-coded to
be "/usr/local/bin:/usr/bin:/bin". Use an appropriate value for the
system from <paths.h> when available.
Add HAVE_PATHS_H make variables and enable it on Linux, FreeBSD,
NetBSD, OpenBSD and GNU where it is known to exist for now. Somebody
else may want to do an autoconf support later.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/merge-diff3-label:
merge-recursive: add a label for ancestor
cherry-pick, revert: add a label for ancestor
revert: clarify label on conflict hunks
compat: add mempcpy()
checkout -m --conflict=diff3: add a label for ancestor
merge_trees(): add ancestor label parameter for diff3-style output
merge_file(): add comment explaining behavior wrt conflict style
checkout --conflict=diff3: add a label for ancestor
ll_merge(): add ancestor label parameter for diff3-style output
merge-file --diff3: add a label for ancestor
xdl_merge(): move file1 and file2 labels to xmparam structure
xdl_merge(): add optional ancestor label to diff3-style output
tests: document cherry-pick behavior in face of conflicts
tests: document format of conflicts from checkout -m
Conflicts:
builtin/revert.c
As on FreeBSD, defining _XOPEN_SOURCE to 600 on DragonFly BSD 2.4-RELEASE
or later hides symbols from programs, which leads to implicit declaration
of functions, making the return value to be assumed an int. On architectures
where sizeof(int) < sizeof(void *), this can cause unexpected behaviors or
crashes.
This change won't affect other OSes unless they define __DragonFly__ macro,
or older versions of DragonFly BSD as the current git code doesn't rely on
the features only available with _XOPEN_SOURCE set to 600 on DragonFly.
Signed-off-by: YONETANI Tomokazu <y0netan1@dragonflybsd.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces the remove_or_warn function which is a
generalised version of the {unlink,rmdir}_or_warn functions. It takes
an additional parameter indicating the mode of the file to be removed.
The patch also modifies certain functions to use remove_or_warn
where appropriate, and adds a test case for a bug fixed by the use
of remove_or_warn.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements an rmdir_or_warn function (like unlink_or_warn
but for directories) that uses the generalised warning code in
warn_if_unremovable.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By providing a hook for the routine responsible for trying to free some
memory on malloc failure, we can ensure that the called routine is
protected by the appropriate locks when threads are in play.
The obvious offender here was pack-objects which was calling xmalloc()
within threads while release_pack_memory() is not thread safe.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mempcpy() function was added in glibc 2.1. It is quite handy, so
add an implementation for cross-platform use.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There exist already a number of static functions named 'report', therefore,
the function name was changed.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add routine for allocating NUL-terminated memory block without risking
integer overflow in addition of +1 for NUL byte.
[jc: with suggestion from Bill Lear]
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ap/merge-backend-opts:
Document that merge strategies can now take their own options
Extend merge-subtree tests to test -Xsubtree=dir.
Make "subtree" part more orthogonal to the rest of merge-recursive.
pull: Fix parsing of -X<option>
Teach git-pull to pass -X<option> to git-merge
git merge -X<option>
git-merge-file --ours, --theirs
Conflicts:
git-compat-util.h
* jc/symbol-static:
date.c: mark file-local function static
Replace parse_blob() with an explanatory comment
symlinks.c: remove unused functions
object.c: remove unused functions
strbuf.c: remove unused function
sha1_file.c: remove unused function
mailmap.c: remove unused function
utf8.c: mark file-local function static
submodule.c: mark file-local function static
quote.c: mark file-local function static
remote-curl.c: mark file-local function static
read-cache.c: mark file-local functions static
parse-options.c: mark file-local function static
entry.c: mark file-local function static
http.c: mark file-local functions static
pretty.c: mark file-local function static
builtin-rev-list.c: mark file-local function static
bisect.c: mark file-local function static
Teach "-X <option>" command line argument to "git merge" that is passed to
strategy implementations. "ours" and "theirs" autoresolution introduced
by the previous commit can be asked to the recursive strategy.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Linux TIOCGWINSZ is defined somehwere in ioctl.h, which is already
included. On Solaris we also need to include termios.h. Without this
term_columns() in help.c will think TIOCGWINSZ is not supported and
always return 80 columns.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some new callers would want to use printf-like formatting, when issuing
their usage messages. An option is to change usage() itself also be like
printf(), which would make it similar to die() and warn().
But usage() is typically fixed, as opposed to die() and warn() that gives
diagnostics depending on the situation. Indeed, the majority of strings
given by existing callsites to usage() are fixed strings. If we were to
make usage() take printf-style format, they all need to be changed to have
"%s" as their first argument.
So instead, introduce usagef() so that limited number of callers can use
it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some compilers (including at least MSVC and ARM RVDS) supports
NORETURN on function declarations, but not on function pointers.
This patch makes it possible to define NORETURN for these compilers,
by splitting the NORETURN macro into two - one for function
declarations and one for function pointers.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Some compilers (including at least MSVC) support NORETURN
on function declarations, but only before the function-name.
This patch makes it possible to define NORETURN to something
meaningful for those compilers.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Centralize the include of windows.h in git-compat-util.h, turn on
WIN32_LEAN_AND_MEAN to avoid including plenty of other header files
which is not needed in Git. Also ensure we load winsock2.h first,
so we don't load the older winsock definitions at a later stage,
since they contain duplicate definitions.
When moving windows.h into git-compat-util.h, we need to protect
the definition of struct pollfd in mingw.h, since this file is used
by both MinGW and MSVC, and the latter defines this struct in
winsock2.h.
We need to keep the windows.h include in compat/win32.h, since its
shared by both MinGW and Cygwin, and we're not touching Cygwin in
this commit. The include in git-compat-util.h is protected with an
ifdef WIN32, which is not the case when compiling for Cygwin.
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add msvc.c and msvc.h to build git under MSVC.
Signed-off-by: Frank Li <lznuaa@gmail.com>
Signed-off-by: Marius Storm-Olsen <mstormo@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/block-sha1:
remove ARM and Mozilla SHA1 implementations
block-sha1: guard gcc extensions with __GNUC__
make sure byte swapping is optimal for git
block-sha1: make the size member first in the context struct
This 'ifndef' macro is entered only when __sun__ is not defined. This test
will never fail since it is located inside of the 'else' branch of an 'if'
macro which tests whether __sun__ is defined. It has had no effect since
the merge at 436f66b7.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We rely on ntohl() and htonl() to perform byte swapping in many places.
However, some platforms have libraries providing really poor
implementations of those which might cause significant performance
issues, especially with the block-sha1 code.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't define _XOPEN_SOURCE
Do define _SGI_SOURCE
Defining _XOPEN_SOURCE prevents many of the common functions and macros
from being defined. _Not_ setting _XOPEN_SOURCE, and instead setting
_SGI_SOURCE, provides all of the XPG4, XPG5, BSD, POSIX functions and
declarations, _BUT_ provides a horribly broken snprintf(). SGI does have
a working snprintf(), but it is only provided when _NO_XOPEN5 evaluates
to zero, and this only happens if _XOPEN_SOURCE is defined which, as
mentioned above, prevents many other common functions and defines.
The broken snprintf will be worked around with SNPRINTF_RETURNS_BOGUS in
the Makefile in a later patch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
There are many calls to die() that do, or should, report
strerror(errno) to indicate how the syscall they guard failed.
Introduce a small helper function for this case.
Note:
- POSIX says vsnprintf can modify errno in some unlikely cases, so we
have to use errno early.
- We take some care to pass the original format to die_routine(), in
case someone wants to call die_errno() with custom format
characters.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/solaris:
configure: test whether -lresolv is needed
Makefile: insert SANE_TOOL_PATH to PATH before /bin or /usr/bin
git-compat-util.h: avoid using c99 flex array feature with Sun compiler 5.8
Makefile: add section for SunOS 5.7
Makefile: introduce SANE_TOOL_PATH for prepending required elements to PATH
Makefile: define __sun__ on SunOS
git-compat-util.h: tweak the way _XOPEN_SOURCE is set on Solaris
On Solaris choose the OLD_ICONV iconv() declaration based on the UNIX spec
Makefile: add NEEDS_RESOLV to optionally add -lresolv to compile arguments
Makefile: use /usr/ucb/install on SunOS platforms rather than ginstall
Conflicts:
Makefile
The Sun c99 compiler as recent as version 5.8 Patch 121016-06 2007/08/01
produces an error when compiling diff-delta.c. This source file #includes
the delta.h header file which pre-declares a struct which is later defined
to contain a flex array member. The Sun c99 compiler fails to compile
diff-delta.c and gives the following error:
"diff-delta.c", line 314: identifier redeclared: create_delta
current : function(pointer to const struct delta_index {unsigned long memsize, pointer to const void src_buf, unsigned long src_size, unsigned int hash_mask, array[-1] of pointer to struct index_entry {..} hash}, pointer to const void, unsigned long, pointer to unsigned long, unsigned long) returning pointer to void
previous: function(pointer to const struct delta_index {unsigned long memsize, pointer to const void src_buf, unsigned long src_size, unsigned int hash_mask, array[-1] of pointer to struct index_entry {..} hash}, pointer to const void, unsigned long, pointer to unsigned long, unsigned long) returning pointer to void : "delta.h", line 44
c99: acomp failed for diff-delta.c
So, avoid using this c99 feature when compiling with the Sun c compilers
version 5.8 and older (the most recent version tested).
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris, when _XOPEN_EXTENDED is set, its header file forces the
programs to be XPG4v2, defeating any _XOPEN_SOURCE setting to say we are
XPG5 or XPG6. Also on Solaris, XPG6 programs must be compiled with a c99
compiler, while non XPG6 programs must be compiled with a pre-c99 compiler.
So when compiling on Solaris, always refrain from setting _XOPEN_EXTENDED,
and then set _XOPEN_SOURCE to 600 or 500 based on whether a c99 compiler
is being used or not.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* da/pretty-tempname:
diff: generate pretty filenames in prep_temp_blob()
compat: add a basename() compatibility function
compat: add a mkstemps() compatibility function
Conflicts:
Makefile
Some systems such as Windows lack libgen.h so provide a
basename() implementation for cross-platform use.
This introduces the NO_LIBGEN_H construct to the Makefile
and autoconf scripts.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mkstemps() is a BSD extension so provide an implementation
for cross-platform use.
Signed-off-by: David Aguilar <davvid@gmail.com>
Tested-by: Johannes Sixt <j6t@kdbg.org> (Windows)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-compat-util.h, we do
#define _XOPEN_SOURCE 600
#define _XOPEN_SOURCE_EXTENDED 1
unless we are on BSD or SCO.
On OpenSolaris (200811), /usr/include/sys/feature_tests.h has this nice
table:
Feature Test Macro Specification
------------------------------------------------ -------------
_XOPEN_SOURCE XPG3
_XOPEN_SOURCE && _XOPEN_VERSION = 4 XPG4
_XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED = 1 XPG4v2
_XOPEN_SOURCE = 500 XPG5
_XOPEN_SOURCE = 600 (or POSIX_C_SOURCE=200112L) XPG6
Later in the same header, compilation with -c99 is made to fail if _XPG6 is
not set, like this:
#if defined(_STDC_C99) && (defined(__XOPEN_OR_POSIX) && !defined(_XPG6))
#error "Compiler or options invalid for pre-UNIX 03 X/Open applications \
and pre-2001 POSIX applications"
#elif ...
The problem is that they check things in an order that is inconvenient for
us. When they see _XOPEN_SOURCE_EXTENDED, they declare that we are XPG4v2,
regardless of the value of _XOPEN_SOURCE.
To work around this problem, do not define _XOPEN_SOURCE_EXTENDED on
Sun's.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This seem to be a very common pattern in the current code.
The function prints a generic removal failure message, the file name
which failed and readable errno presentation. The function preserves
errno and always returns the value unlink(2) returned, but prints
no message for ENOENT, as it was the most often filtered out in the
code calling unlink. Besides, removing a file is anyway the purpose of
calling unlink.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit e4c72923 (write_entry(): use fstat() instead of lstat() when file
is open, 2009-02-09) introduced an optimization of write_entry().
Unfortunately, we cannot take advantage of this optimization on Windows
because there is no guarantee that the time stamps are updated before the
file is closed:
"The only guarantee about a file timestamp is that the file time is
correctly reflected when the handle that makes the change is closed."
(http://msdn.microsoft.com/en-us/library/ms724290(VS.85).aspx)
The failure of this optimization on Windows can be observed most easily by
running a 'git checkout' that has to update several large files. In this
case, 'git checkout' will report modified files, but infact only the
timestamps were incorrectly recorded in the index, as can be verified by a
subsequent 'git diff', which shows no change.
Dmitry Potapov reports the same fix needs on Cygwin; this commit contains
his updates for that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add USE_WIN32_MMAP which triggers the use of windows' native
file memory mapping functionality in git_mmap()/git_munmap() functions.
As git functions currently use mmap with MAP_PRIVATE set only, this
implementation supports only that mode for now.
On Windows, offsets for memory mapped files need to match the allocation
granularity. Take this into account when calculating the packed git-
windowsize and file offsets. At the moment, the only function which makes
use of offsets in conjunction with mmap is use_pack() in sha1-file.c.
Git fast-import's code path tries to map a portion of the temporary
packfile that exceeds the current filesize, i.e. offset+length is
greater than the filesize. The NO_MMAP code worked with that since pread()
just reads the file content until EOF and returns gracefully, while
MapViewOfFile() aborts the mapping and returns 'Access Denied'.
Working around that by determining the filesize and adjusting the length
parameter.
Signed-off-by: Janos Laube <janos.dev@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
Not all OSes use st_ctim and st_mtim in their struct stat. In
particular, it appears that OS X uses st_*timespec instead. So add a
Makefile variable and #define called USE_ST_TIMESPEC to switch the
USE_NSEC defines to use st_*timespec.
This also turns it on by default for OS X (Darwin) machines. Likely
this is a sane default for other BSD kernels as well, but I don't have
any to test that assumption on.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, the lack of USE_NSEC meant "do not record nor use the
nanosecond resolution part of the file timestamps". To avoid problems on
filesystems that lose the ns part when the metadata is flushed to the disk
and then later read back in, disabling USE_NSEC has been a good idea in
general.
If you are on a filesystem without such an issue, it does not hurt to read
and store them in the cached stat data in the index entries even if your
git is compiled without USE_NSEC. The index left with such a version of
git can be read by git compiled with USE_NSEC and it can make use of the
nanosecond part to optimize the check to see if the path on the filesystem
hsa been modified since we last looked at.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a standard definition of isascii() and use it to replace an open
coded high-bit test in pretty.c. While we're there, write the ESC
char as the more commonly used '\033' instead of as 0x1b to enhance
its grepability.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a repository created with git older than f49fb35 (git-init-db: create
"pack" subdirectory under objects, 2005-06-27), objects/pack/ directory is
not created upon initialization. It was Ok because subdirectories are
created as needed inside directories init-db creates, and back then,
packfiles were recent invention.
After the said commit, new codepaths started relying on the presense of
objects/pack/ directory in the repository. This was exacerbated with
8b4eb6b (Do not perform cross-directory renames when creating packs,
2008-09-22) that moved the location temporary pack files are created from
objects/ directory to objects/pack/ directory, because moving temporary to
the final location was done carefully with lazy leading directory creation.
Many packfile related operations in such an old repository can fail
mysteriously because of this.
This commit introduces two helper functions to make things work better.
- odb_mkstemp() is a specialized version of mkstemp() to refactor the
code and teach it to create leading directories as needed;
- odb_pack_keep() refactors the code to create a ".keep" file while
create leading directories as needed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add is_regex_special(), a character class macro for chars that have a
special meaning in regular expressions.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace isspecial() by the new macro is_glob_special(), which is more,
well, specialized. The former included the NUL char in its character
class, while the letter only included characters that are special to
file name globbing.
The new name contains underscores because they enhance readability
considerably now that it's made up of three words. Renaming the
function is necessary to document its changed scope.
The call sites of isspecial() are updated to check explicitly for NUL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lstat/stat functions in Cygwin are very slow, because they try to emulate
some *nix things that Git does not actually need. This patch adds Win32
specific implementation of these functions for Cygwin.
This implementation handles most situation directly but in some rare cases
it falls back on the implementation provided for Cygwin. This is necessary
for two reasons:
- Cygwin has its own file hierarchy, so absolute paths used in Cygwin is
not suitable to be used Win32 API. cygwin_conv_to_win32_path can not be
used because it automatically dereference Cygwin symbol links, also it
causes extra syscall. Fortunately Git rarely use absolute paths, so we
always use Cygwin implementation for absolute paths.
- Support of symbol links. Cygwin stores symbol links as ordinary using
one of two possible formats. Therefore, the fast implementation falls
back to Cygwin functions if it detects potential use of symbol links.
The speed of this implementation should be the same as mingw_lstat for
common cases, but it is considerable slower when the specified file name
does not exist.
Despite all efforts to make the fast implementation as robust as possible,
it may not work well for some very rare situations. I am aware only one
situation: use Cygwin mount to bind unrelated paths inside repository
together. Therefore, the core.ignoreCygwinFSTricks configuration option is
provided, which controls whether native or Cygwin version of stat is used.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This removes three functions that are not used anywhere.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Acked-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The following syntax:
char foo[] = {
[0] = 1,
[7] = 2,
[15] = 3
};
is a c99 construct which some compilers do not support even though they
support other c99 constructs. This construct can be avoided by folding
these 'special' test cases into the sane_ctype array and making use of
the related infrastructure.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/imap:
Documentation: Improve documentation for git-imap-send(1)
imap-send.c: more style fixes
imap-send.c: style fixes
git-imap-send: Support SSL
git-imap-send: Allow the program to be run from subdirectories of a git tree
Some platforms do not have st_blocks member in "struct stat"; mingw
already emulates it by rounding it up to closest 512-byte blocks (even
though it could overcount when a file has holes).
The reason to use the member is only to figure out how many kilobytes the
files occupy on-disk, so give a helper function in git-compat-util.h to
compute this value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
Allow SSL to be used when a imaps:// URL is used for the host name.
Also, automatically use TLS when not using imaps:// by using the IMAP
STARTTLS command, if the server supports it.
Tested with Courier and Gimap IMAP servers.
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/merge-in-c:
reduce_heads(): protect from duplicate input
reduce_heads(): thinkofix
Add a new test for git-merge-resolve
t6021: add a new test for git-merge-resolve
Teach merge.log to "git-merge" again
Build in merge
Fix t7601-merge-pull-config.sh on AIX
git-commit-tree: make it usable from other builtins
Add new test case to ensure git-merge prepends the custom merge message
Add new test case to ensure git-merge reduces octopus parents when possible
Introduce reduce_heads()
Introduce get_merge_bases_many()
Add new test to ensure git-merge handles more than 25 refs.
Introduce get_octopus_merge_bases() in commit.c
git-fmt-merge-msg: make it usable from other builtins
Move read_cache_unmerged() to read-cache.c
Add new test to ensure git-merge handles pull.twohead and pull.octopus
Move parse-options's skip_prefix() to git-compat-util.h
Move commit_list_count() to commit.c
Move split_cmdline() to alias.c
Conflicts:
Makefile
parse-options.c
Since 6e1c23442 we make use of these C99 constructs, but this commit did
not provide fallbacks for non-C99 systems.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
builtin-remote.c and parse-options.c both have a skip_prefix() function,
for the same purpose. Move parse-options's one to git-compat-util.h and
let builtin-remote use it as well.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_in_full()'s is used in compat/pread.c. read_in_full() is
declared in cache.h. But we can't include cache.h because too
many macros are defined there. Using read_in_full() without
including cache.h is dangerous because we wouldn't recognize if
its prototyp changed. gcc issues a warning about that.
This commit adds a forward declaration to git-compat-util.h.
git-compat-util.h is included by compat/pread.c _and_ cache.h.
Hence, changes in cache.h would be detected.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Before we can successfully parse a builtin command from the program name
we must strip off unneeded parts, that is, the file extension.
Furthermore, we must take Windows style path names into account when we
parse the program name.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
GIT's guts work with a forward slash as a path separators. We do not change
that. Rather we make sure that only "normalized" paths enter the depths
of the machinery.
We have to translate backslashes to forward slashes in the prefix and in
command line arguments. Fortunately, all of them are passed through
functions in setup.c.
A macro has_dos_drive_path() is defined that checks whether a path begins
with a drive letter+colon combination. This predicate is always false on
Unix. Another macro is_dir_sep() abstracts that a backslash is also a
directory separator on Windows.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change GIT can be compiled and linked using MinGW. Builtins
that only read the repository such as the log family and grep already
work.
Simple stubs are provided for a number of functions that the Windows C
runtime does not offer. They will be completed in later patches.
However, a fix for the snprintf/vsnprintf replacement is applied here
to avoid buffer overflows.
Dmitry Kakurin pointed out that access(..., X_OK) would always fails on
Vista and suggested the -D__USE_MINGW_ACCESS workaround.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
This patch adds support to compile and run git on 12 additional platforms.
The platforms are based on UNIX Systems Labs (USL)/Novell/SYS V code base.
The most common are Novell UnixWare 2.X.X, SCO UnixWare 7.X.X,
OpenServer 5.0.X, OpenServer 6.0.X, and SCO pre OSR 5 platforms.
Looking at the the various platform headers, I find:
#if defined(_KERNEL) || !defined(_POSIX_SOURCE) \
&& !defined(_POSIX_C_SOURCE) && !defined(_XOPEN_SOURCE)
which hides u_short and other typedefs that other header files on these
platforms depend on. WIth _XOPEN_SOURCE defined, sources that include
system header files that depend on the typedefs such as u_short cannot be
compiled on these platforms.
__USLC__ indicates UNIX System Labs Corperation (USLC), or a Novell-derived
compiler and/or some SysV based OS's.
__M_UNIX indicates XENIX/SCO UNIX/OpenServer 5.0.7 and prior releases
of the SCO OS's. It is used just like Apple and BSD, both of these
shouldn't have _XOPEN_SOURCE defined.
This is with suggestions and modifications from
Daniel Barkalow, Junio C Hamano, Thomas Harning, and Jeremy Maitin-Shepard.
Signed-off-by: Boyd Lynn Gerber <gerberb@zenez.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Runtime pack access is done in the pack file mtime order since recent
packs are more likely to contain frequently used objects than old packs.
However the --max-pack-size option can produce multiple packs with mtime
in the reversed order as newer objects are always written first.
Let's modify mtime of later pack files (when any) so they appear older
than preceding ones when a repack creates multiple packs.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Some systems (namely HPUX and Windows) return -1 when maxsize in snprintf()
and in vsnprintf() is reached. So replace snprintf() and vsnprintf()
functions with our own ones that return correct value upon overflow.
[jc: verified that review comments by J6t have been incorporated, and
tightened the check to verify the resulting buffer contents, suggested
by Wayne Davison]
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not allow changing the bit to a non-root user.
This fixes t1301-shared-repo.sh on the platform.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some systems do not fail as expected when fread et al. are called on
a directory stream. Replace fopen on such systems which will fail
when the supplied path is a directory.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
qsort in Windows 2000 (and various other C libraries) is a Quicksort
with the usual O(n^2) worst case. Unfortunately, sorting Git trees
seems to get very close to that worst case quite often:
$ /git/gitbad runstatus
# On branch master
qsort, nmemb = 30842
done, 237838087 comparisons.
This patch adds a simplified version of the merge sort that is glibc's
qsort(3). As a merge sort, this needs a temporary array equal in size
to the array that is to be sorted, but has a worst-case performance of
O(n log n).
The complexity that was removed is:
* Doing direct stores for word-size and -aligned data.
* Falling back to quicksort if the allocation required to perform the
merge sort would likely push the machine into swap.
Even with these simplifications, this seems to outperform the Windows
qsort(3) implementation, even in Windows XP (where it is "fixed" and
doesn't trigger O(n^2) complexity on trees).
[jes: moved into compat/qsort.c, as per Johannes Sixt's suggestion]
[bcd: removed gcc-ism, thanks to Edgar Toernig. renamed make variable
per Junio's comment.]
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX.1-2001 has declaration of select(2) in <sys/select.h>, but
in the previous version of SUS, it was declared in <sys/time.h>
(which is already included in git-compat-util.h).
This introduces NO_SYS_SELECT_H macro in the Makefile to be set
on older systems, to skip inclusion of <sys/select.h> that does
not exist on them.
We could check _POSIX_VERSION with 200112L and do this
automatically, but earlier it was reported that the approach
does not work well on some vintage of HP-UX. Other systems may
get _POSIX_VERSION itself wrong. At least for now, this manual
configuration is safer.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the routine is an open-coded loop that avoids an extra
strlen() in the previous implementation, it got a bit too big to
be inlined. Uninlining it makes code footprint smaller but the
result still retains the avoidance of strlen() cost.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain codepaths (notably "git log --pretty=format...") use
prefixcmp() extensively, with very short prefixes. In those cases,
calling strlen() is a wasteful operation, so avoid it.
Initial patch by Marco Costalba.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/mingw-fallouts:
fetch-pack: Prepare for a side-band demultiplexer in a thread.
rehabilitate some t5302 tests on 32-bit off_t machines
Allow ETC_GITCONFIG to be a relative path.
Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG.
Allow a relative builtin template directory.
Close files opened by lock_file() before unlinking.
builtin run_command: do not exit with -1.
Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h.
Use is_absolute_path() in sha1_file.c.
Skip t3902-quoted.sh if the file system does not support funny names.
t5302-pack-index: Skip tests of 64-bit offsets if necessary.
t7501-commit.sh: Not all seds understand option -i
t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
When declaring a structure with a flexible array member, instead
of defaulting to the c99 syntax for non-gnu compilers (which
burned people with older compilers), default to the traditional
and more portable "member[1]; /* more */" syntax.
At the same time, other c99 compilers should be able to take
advantage of the modern syntax to flexible array members without
being gcc. Check __STDC_VERSION__ for that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/diffopts:
Reorder diff_opt_parse options more logically per topics.
Make the diff_options bitfields be an unsigned with explicit masks.
Use OPT_BIT in builtin-pack-refs
Use OPT_BIT in builtin-for-each-ref
Use OPT_SET_INT and OPT_BIT in builtin-branch
parse-options new features.
... since all system headers are pulled in via git-compat-util.h
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apart from the error in the condition (&& should actually be ||), the
construct
#if !defined(A) || !A
leads to a syntax error in the C preprocessor if A is indeed not defined.
Tested-by: David Symonds <dsymonds@gmail.com>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
options flags:
~~~~~~~~~~~~~
PARSE_OPT_NONEG allow the caller to disallow the negated option to exists.
option types:
~~~~~~~~~~~~
OPTION_BIT: ORs (or NANDs) a mask.
OPTION_SET_INT: force the value to be set to this integer.
OPTION_SET_PTR: force the value to be set to this pointer.
helper:
~~~~~~
HAS_MULTI_BITS (in git-compat-util.h) is a bit-hack to check if an
unsigned integer has more than one bit set, useful to check if conflicting
options have been used.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strchrnul() was introduced in glibc in April 1999 and included in
glibc-2.1. Checking for that version means the majority of all git
users would get to use the optimized version in glibc. Of the
remaining few some might get to use a slightly slower version
than necessary but probably not slower than what we have today.
Unfortunately, __GLIBC_PREREQ() macro was not available in glibc 2.1.1
which was short lived but already supported strchrnul(). Odd minority
users of that library needs to live with our compatibility inline version.
Rediffed-against-next-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Pierre Habouzit, add strchrnul(). It's a useful GNU
extension and can simplify string parser code. There are several
places in git that can be converted to strchrnul(); as a trivial
example, this patch introduces its usage to builtin-fetch--tool.c.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually you cannot revert a merge because you do not know which
side of the merge should be considered the mainline (iow, what
change to reverse).
With this patch, cherry-pick and revert learn -m (--mainline)
option that lets you specify the parent number (starting from 1)
of the mainline, so that you can:
git revert -m 1 $merge
to reverse the changes introduced by the $merge commit relative
to its first parent, and:
git cherry-pick -m 2 $merge
to replay the changes introduced by the $merge commit relative
to its second parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris 9 doesn't have mkdtemp() so we need to emulate it for the
rsync transport implementation. Since Solaris 9 is lacking this
function we can also reasonably assume it is not available on
Solaris 8 either. The new Makfile definition NO_MKDTEMP can be
set to enable the git compat version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A lot of places in git's code use code like:
char *res;
len = ... find length of an interesting segment in src ...;
res = xmalloc(len + 1);
memcpy(res, src, len);
res[len] = '\0';
return res;
A new function xmemdupz() captures the allocation, copy and NUL
termination. Existing xstrndup() is reimplemented in terms of
this new function.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
memmem() is a nice GNU extension for searching a length limited string
in another one.
This compat version is based on the version found in glibc 2.2 (GPL 2);
I only removed the optimization of checking the first char by hand, and
generally tried to keep the code simple. We can add it back if memcmp
shows up high in a profile, but for now I prefer to keep it (almost
trivially) simple.
Since I don't really know which platforms beside those with a glibc
have their own memmem(), I used a heuristic: if NO_STRCASESTR is set,
then NO_MEMMEM is set, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a wrapper for mkstemp() that performs error checking and
calls die() when an error occur.
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This defines xdup() and xfdopen() in git-compat-util.h to give
us error-catching variants of them without cluttering the code
too much.
Signed-off-by: Jim Meyering <jim@meyering.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function converts the value of h_errno (last error of name
resolver library, see netdb.h).
One of systems which supposedly do not have the function is SunOS.
POSIX does not mandate its presence.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
format-patch: add MIME-Version header when we add content-type.
Fixed link in user-manual
import-tars: Use the "Link indicator" to identify directories
git name-rev writes beyond the end of malloc() with large generations
Documentation/branch: fix small typo in -D example
When using git name-rev on my kernel tree I triggered a malloc()
corruption warning from glibc.
apw@pinky$ git log --pretty=one $N/base.. | git name-rev --stdin
*** glibc detected *** malloc(): memory corruption: 0x0bff8950 ***
Aborted
This comes from name_rev() which is building the name of the revision
in a malloc'd string, which it sprintf's into:
char *new_name = xmalloc(len + 8);
[...]
sprintf(new_name, "%.*s~%d^%d", len, tip_name,
generation, parent_number);
This allocation is only sufficient if the generation number is
less than 5 digits, in my case generation was 13432. In reality
parent_number can be up to 16 so that also can require two digits,
reducing us to 3 digits before we are at risk of blowing this
allocation.
This patch introduces a decimal_length() which approximates the
number of digits a type may hold, it produces the following:
Type Longest Value Len Est
---- ------------- --- ---
unsigned char 256 3 4
unsigned short 65536 5 6
unsigned long 4294967296 10 11
unsigned long long 18446744073709551616 20 21
char -128 4 4
short -32768 6 6
long -2147483648 11 11
long long -9223372036854775808 20 21
This is then used to size the new_name.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: use decode_utf8 directly
posix compatibility for t4200
Document 'opendiff' value in config.txt and git-mergetool.txt
Allow PERL_PATH="/usr/bin/env perl"
Make xstrndup common
diff.c: fix "size cache" handling.
http-fetch: Disable use of curl multi support for libcurl < 7.16.
This also improves the implementation to match how strndup is
specified (by GNU): if the length given is longer than the string,
only the string's length is allocated and copied, but the string need
not be null-terminated if it is at least as long as the given length.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Start preparing for 1.5.1.3
Sanitize @to recipients.
git-svn: Ignore usernames in URLs in find_by_url
Document --dry-run and envelope-sender for git-send-email.
Allow users to optionally specify their envelope sender.
Ensure clean addresses are always used with Net::SMTP
Validate @recipients before using it for sendmail and Net::SMTP.
Perform correct quoting of recipient names.
Change the scope of the $cc variable as it is not needed outside of send_message.
Debugging cleanup improvements
Prefix Dry- to the message status to denote dry-runs.
Document --dry-run parameter to send-email.
git-svn: Don't rely on $_ after making a function call
Fix handle leak in write_tree
Actually handle some-low memory conditions
Conflicts:
RelNotes
git-send-email.perl
Tim Ansell discovered his Debian server didn't permit git-daemon to
use as much memory as it needed to handle cloning a project with
a 128 MiB packfile. Filtering the strace provided by Tim of the
rev-list child showed this gem of a sequence:
open("./objects/pack/pack-*.pack", O_RDONLY|O_LARGEFILE <unfinished ...>
<... open resumed> ) = 5
OK, so the packfile is fd 5...
mmap2(NULL, 33554432, PROT_READ, MAP_PRIVATE, 5, 0 <unfinished ...>
<... mmap2 resumed> ) = 0xb5e2d000
and we mapped one 32 MiB window from it at position 0...
mmap2(NULL, 31020635, PROT_READ, MAP_PRIVATE, 5, 0x6000 <unfinished ...>
<... mmap2 resumed> ) = -1 ENOMEM (Cannot allocate memory)
And we asked for another window further into the file. But got
denied. In Tim's case this was due to a resource limit on the
git-daemon process, and its children.
Now where are we in the code? We're down inside use_pack(),
after we have called unuse_one_window() enough times to make sure
we stay within our allowed maximum window size. However since we
didn't unmap the prior window at 0xb5e2d000 we aren't exceeding
the current limit (which probably was just the defaults).
But we're actually down inside xmmap()...
So we release the window we do have (by calling release_pack_memory),
assuming there is some memory pressure...
munmap(0xb5e2d000, 33554432 <unfinished ...>
<... munmap resumed> ) = 0
close(5 <unfinished ...>
<... close resumed> ) = 0
And that was the last window in this packfile. So we closed it.
Way to go us. Our xmmap did not expect release_pack_memory to
close the fd its about to map...
mmap2(NULL, 31020635, PROT_READ, MAP_PRIVATE, 5, 0x6000 <unfinished ...>
<... mmap2 resumed> ) = -1 EBADF (Bad file descriptor)
And so the Linux kernel happily tells us f' off.
write(2, "fatal: ", 7 <unfinished ...>
<... write resumed> ) = 7
write(2, "Out of memory? mmap failed: Bad "..., 47 <unfinished ...>
<... write resumed> ) = 47
And we report the bad file descriptor error, and not the ENOMEM,
and die, claiming we are out of memory. But actually that mmap
should have succeeded, as we had enough memory for that window,
seeing as how we released the prior one.
Originally when I developed the sliding window mmap feature I had
this exact same bug in fast-import, and I dealt with it by handing
in the struct packed_git* we want to open the new window for, as the
caller wasn't prepared to reopen the packfile if unuse_one_window
closed it. The same is true here from xmmap, but the caller doesn't
have the struct packed_git* handy. So I'm using the file descriptor
instead to perform the same test.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* np/pack: (27 commits)
document --index-version for index-pack and pack-objects
pack-objects: remove obsolete comments
pack-objects: better check_object() performances
add get_size_from_delta()
pack-objects: make in_pack_header_size a variable of its own
pack-objects: get rid of create_final_object_list()
pack-objects: get rid of reuse_cached_pack
pack-objects: clean up list sorting
pack-objects: rework check_delta_limit usage
pack-objects: equal objects in size should delta against newer objects
pack-objects: optimize preferred base handling a bit
clean up add_object_entry()
tests for various pack index features
use test-genrandom in tests instead of /dev/urandom
simple random data generator for tests
validate reused pack data with CRC when possible
allow forcing index v2 and 64-bit offset treshold
pack-redundant.c: learn about index v2
show-index.c: learn about index v2
sha1_file.c: learn about index version 2
...
* builtin-grep.c (strtoul_ui): Move function definition from here, to...
* git-compat-util.h (strtoul_ui): ...here, with an added "base" parameter.
* builtin-grep.c (cmd_grep): Update use of strtoul_ui to include base, "10".
* builtin-update-index.c (read_index_info): Diagnose an invalid mode integer
that is out of range or merely larger than INT_MAX.
(cmd_update_index): Use strtoul_ui, not sscanf.
* convert-objects.c (write_subdirectory): Likewise.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* builtin-grep.c (strtoul_ui): Move function definition from here, to...
* git-compat-util.h (strtoul_ui): ...here, with an added "base" parameter.
* builtin-grep.c (cmd_grep): Update use of strtoul_ui to include base, "10".
* builtin-update-index.c (read_index_info): Diagnose an invalid mode integer
that is out of range or merely larger than INT_MAX.
(cmd_update_index): Use strtoul_ui, not sscanf.
* convert-objects.c (write_subdirectory): Likewise.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch introduces the MSB() macro to obtain the desired number of
most significant bits from a given variable independently of the variable
type.
It is then used to better implement the overflow test on the OBJ_OFS_DELTA
base offset variable with the property of always working correctly
regardless of the type/size of that variable.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes a problem reported by Randal Schwartz:
>I finally tracked down all the (albeit inconsequential) errors I was getting
>on both OpenBSD and OSX. It's the warn() function in usage.c. There's
>warn(3) in BSD-style distros. It'd take a "great rename" to change it, but if
>someone with better C skills than I have could do that, my linker and I would
>appreciate it.
It was annoying to me, too, when I was doing some mergetool testing on
Mac OS X, so here's a fix.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Randal L. Schwartz" <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not all platforms have declared 'unsigned long' to be a 64 bit value,
but we want to support a 64 bit packfile (or close enough anyway)
in the near future as some projects are getting large enough that
their packed size exceeds 4 GiB.
By using off_t, the POSIX type that is declared to mean an offset
within a file, we support whatever maximum file size the underlying
operating system will handle. For most modern systems this is up
around 2^60 or higher.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
The function at issue being initgroups() from the <grp.h> header
file. On Cygwin, setting _XOPEN_SOURCE suppresses the definition
of initgroups(), which causes the warning while compiling daemon.c.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Glibc uses the same size for int and off_t by default.
In order to support large pack sizes (>2GB) we force Glibc to a 64bit off_t.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Solaris 8 was pre-c99, and they weren't willing to commit to
the strtoumax definition according to /usr/include/inttypes.h.
This adds NO_STRTOUMAX and NO_STRTOULL for ancient systems.
If NO_STRTOUMAX is defined, the routine in compat/strtoumax.c
will be used instead. That routine passes its arguments to
strtoull unless NO_STRTOULL is defined. If NO_STRTOULL, then
the routine uses strtoul (unsigned long).
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Acked-by: Shawn O Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Older Solaris machines lack stdint.h but have inttypes.h.
The standard has inttypes.h including stdint.h, so at worst
this pollutes the namespace a bit.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Plain integer types without a fixed size can vary between platforms. Even
though all common platforms use 32-bit ints, there is no guarantee that
this won't change at some point. Furthermore, specifying an integer type
with explicit size makes the definition of structures more obvious.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
AIX 5.3 seems to need _ALL_SOURCE for struct addrinfo, but that
introduces a struct list in grp.h.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes another problem that Andy's case showed: git-fsck-objects
reports nonsensical results for corrupt objects.
There were actually two independent and confusing problems:
- when we had a zero-sized file and used map_sha1_file, mmap() would
return EINVAL, and git-fsck-objects would report that as an insane and
confusing error. I don't know when this was introduced, it might have
been there forever.
- when "parse_object()" returned NULL, fsck would say "object not found",
which can be very confusing, since obviously the object might "exist",
it's just unparseable because it's totally corrupt.
So this just makes "xmmap()" return NULL for a zero-sized object (which is
a valid thing pointer, exactly the same way "malloc()" can return NULL for
a zero-sized allocation). That fixes the first problem (but we could have
fixed it in the caller too - I don't personally much care whichever way it
goes, but maybe somebody should check that the NO_MMAP case does
something sane in this case too?).
And the second problem is solved by just making the error message slightly
clearer - the failure to parse an object may be because it's missing or
corrupt, not necessarily because it's not "found".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using cygwin with cygwin.dll before 1.5.22 the system call pread() is buggy.
This patch introduces NO_PREAD. If NO_PREAD is set git uses a sequence of
lseek()/xread()/lseek() to emulate pread.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is shorter and easier to read, and also makes sure the
constant expression does not overflow integer range.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we have a 64 bit address space we can easily afford to commit
a larger amount of virtual address space to pack file access.
So on these platforms we should increase the default settings of
core.packedGit{Limit,WindowSize} to something that will better
handle very large projects.
Thanks to Andy Whitcroft for pointing out that we can safely
increase these defaults on such systems.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some cases we did not even bother to check the return value of
mmap() and just assume it worked. This is bad, because if we are
out of virtual address space the kernel returned MAP_FAILED and we
would attempt to dereference that address, segfaulting without any
real error output to the user.
We are replacing all calls to mmap() with xmmap() and moving all
MAP_FAILED checking into that single location. If a mmap call
fails we try to release enough least-recently-used pack windows
to possibly succeed, then retry the mmap() attempt. If we cannot
mmap even after releasing pack memory then we die() as none of our
callers have any reasonable recovery strategy for a failed mmap.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we are about to fail because this process has run out of memory we
should first try to automatically control our appetite for address
space by releasing enough least-recently-used pack windows to gain
back enough memory such that we might actually be able to meet the
current allocation request.
This should help users who have fairly large repositories but are
working on systems with relatively small virtual address space.
Many times we see reports on the mailing list of these users running
out of memory during various Git operations. Dynamically decreasing
the amount of pack memory used when the demand for heap memory is
increasing is an intelligent solution to this problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the compiler has asked us to disable use of mmap() on their
platform then we are forced to use git_mmap and its emulation via
pread. In this case large (e.g. 32 MiB) windows for pack access
are simply too big as a command will wind up reading a lot more
data than it will ever need, significantly reducing response time.
To prevent a high latency when NO_MMAP has been selected we now
use a default of 1 MiB for core.packedGitWindowSize. Credit goes
to Linus and Junio for recommending this more reasonable setting.
[jc: upcased the name of the symbolic constant, and made another
hardcoded constant into a symbolic constant while at it. ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This minor cleanup was suggested by Johannes Schindelin.
The mmap is still fake in the sense that we don't support PROT_WRITE
or MAP_SHARED with external modification at all, but that hasn't
stopped us from using mmap() thoughout the Git code.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like the existing error() function the new warn() function can be
used to describe a situation that probably should not be occuring,
but which the user (and Git) can continue to work around without
running into too many problems.
An example situation is a bad commit SHA1 found in a reflog.
Attempting to read this record out of the reflog isn't really an
error as we have skipped over it in the past.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For Mac OS X 10.4, _XOPEN_SOURCE defines _POSIX_C_SOURCE which
hides many symbols from the program.
Breakage noticed and initial analysis provided by Randal
L. Schwartz.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
According to sys/paramh.h it's a "BSD name" for values defined in
<limits.h>. Besides PATH_MAX seems to be more commonly used.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Fredrik points out the current interface of has_extension() is
potentially confusing. Its parameters include both a nul-terminated
string and a length-limited string.
This patch drops the length argument, requiring two nul-terminated
strings; all callsites are updated. I checked that all of them indeed
provide nul-terminated strings. Filenames need to be nul-terminated
anyway if they are to be passed to open() etc. The performance penalty
of the additional strlen() is negligible compared to the system calls
which inevitably surround has_extension() calls.
Additionally, change has_extension() to use size_t inside instead of
int, as that is the exact type strlen() returns and memcmp() expects.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The little helper has_extension() documents through its name what we are
trying to do and makes sure we don't forget the underrun check.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch makes the usage(), die() and error() handlers customizable.
Nothing in the git code itself uses that but many other libgit users
(like Git.pm) will.
This is implemented using the mutator functions primarily because you
cannot directly modifying global variables of libgit from a program that
dlopen()ed it, apparently. But having functions for that is a better API
anyway.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
ISO C99 (and GCC 3.x or later) lets you write a flexible array
at the end of a structure, like this:
struct frotz {
int xyzzy;
char nitfol[]; /* more */
};
GCC 2.95 and 2.96 let you to do this with "char nitfol[0]";
unfortunately this is not allowed by ISO C90.
This declares such construct like this:
struct frotz {
int xyzzy;
char nitfol[FLEX_ARRAY]; /* more */
};
and git-compat-util.h defines FLEX_ARRAY to 0 for gcc 2.95 and
empty for others.
If you are using a C90 C compiler, you should be able
to override this with CFLAGS=-DFLEX_ARRAY=1 from the
command line of "make".
Signed-off-by: Junio C Hamano <junkio@cox.net>
