When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When getpwuid fails, we give a cute but cryptic message.
While it makes sense if you know that getpwuid or identity
functions are being called, this code is triggered behind
the scenes by quite a few git commands these days (e.g.,
receive-pack on a remote server might use it for a reflog;
the current message is hard to distinguish from an
authentication error). Let's switch to something that gives
a little more context.
While we're at it, we can factor out all of the
cut-and-pastes of the "you don't exist" message into a
wrapper function. Rather than provide xgetpwuid, let's make
it even more specific to just getting the passwd entry for
the current uid. That's the only way we use getpwuid anyway,
and it lets us make an even more specific error message.
The current message also fails to mention errno. While the
usual cause for getpwuid failing is that the user does not
exist, mentioning errno makes it easier to diagnose these
problems. Note that POSIX specifies that errno remain
untouched if the passwd entry does not exist (but will be
set on actual errors), whereas some systems will return
ENOENT or similar for a missing entry. We handle both cases
in our wrapper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pull the user's name from the GECOS field of the
passwd file (or generate an email address based on their
username and hostname), we put the result into a
static buffer. While it's extremely unlikely that anybody
ever hit these limits (after all, in such a case their
parents must have hated them), we still had to deal with the
error cases in our code.
Converting these static buffers to strbufs lets us simplify
the code and drop some error messages from the documentation
that have confused some users.
The conversion is mostly mechanical: replace string copies
with strbuf equivalents, and access the strbuf.buf directly.
There are a few exceptions:
- copy_gecos and copy_email are the big winners in code
reduction (since they no longer have to manage the
string length manually)
- git_ident_config wants to replace old versions of
the default name (e.g., if we read the config multiple
times), so it must reset+add to the strbuf instead of
just adding
Note that there is still one length limitation: the
gethostname interface requires us to provide a static
buffer, so we arbitrarily choose 1024 bytes for the
hostname.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the default pager and editor chosen at compile time in the
git-var(1) manpage so users curious about what command _this_ copy of
git will fall back to when EDITOR, VISUAL, and PAGER are unset can
find the answer quickly.
In builds leaving those settings uncustomized, this patch makes the
manpage continue to say "usually vi" and "usually less" so the
formatted documentation is usable for a wide audience including users
of custom builds that change those settings. If you would like your
copy of the docs to be less noncommittal, you will need to set
DEFAULT_PAGER=less and DEFAULT_EDITOR=vi explicitly.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some distributors customize the fallback pager and editor used by git
commands when the user has not indicated a preference via the
core.editor/core.pager configuration or GIT_EDITOR, GIT_PAGER, VISUAL,
EDITOR, and PAGER environment variables, and git's build system
provides DEFAULT_PAGER and DEFAULT_EDITOR makefile settings to help
them with that (see v1.6.6-rc0~24, 2009-11-20).
Unfortunately those compile-time settings do not affect the
documentation, so the uninitiated user who tries to understand git by
reading the git-var(1) manpage can easily be confused when git falls
back to 'nano' and 'more' instead of 'vi' and 'less'. Even if the
distributor patches the distributed docs to reflect the new default,
the user may read the official documentation from the git-htmldocs
repository online and be confused in the same way.
Add a few words stating that the defaults are customizable at
compile time to make the behavior crystal clear.
Reported-by: Rodrigo Silva (MestreLion) <linux@rodrigosilva.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
Use `code snippet` style instead of 'emphasis' for `git cmd ...`
according to the following rules:
* The SYNOPSIS sections are left untouched.
* If the intent is that the user type the command exactly as given, it
is `code`.
If the user is only loosely referred to a command and/or option, it
remains 'emphasised'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Expose the command found by setup_pager() for scripts to use.
Scripts can use this to avoid repeating the logic to look for a
proper pager in each command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the command used by launch_editor() for scripts to use.
This should allow one to avoid searching for a proper editor
separately in each command.
git_editor(void) uses the logic to decide which editor to use
that used to live in launch_editor(). The function returns NULL
if there is no suitable editor; the caller is expected to issue
an error message when appropriate.
launch_editor() uses git_editor() and gives the error message the
same way as before when EDITOR is not set.
"git var GIT_EDITOR" gives the editor name, or an error message
when there is no appropriate one.
"git var -l" gives GIT_EDITOR=name only if there is an
appropriate editor.
Originally-submitted-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been an unfortunate sideway in the git API evolution.
We use git-repo-config for all the other .git/config interaction
so let's also use git-repo-config -l for the variable listing.
Signed-off-by: Petr Baudis <pasky@suse.cz>
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sharing code between shell scripts and C is a challenge. The program
git-var allows us to have a set of named values that a shell script can
interrogate and a normal C program can simply call the functions that
compute them. Allowing sharing when computing plain test values.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
