The -v/-q options were sort-of supported but without using the
parse-options API, and were not documented.
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-imap-send uses block delimiters with
mismatched lengths, which Asciidoctor doesn't support. As a result, the
page is misrendered. Adjust the delimiters so that they are of the same
length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It wouldn't make sense for these configuration variables to be
required for Git in general to function. 'Required' in this context
means required for git imap-send to work.
Noticed while trying to figure out what the sentence describing
imap.tunnel meant.
[jn: expanded to also simplify explanation of imap.folder and
imap.host in the same way]
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly mention that leaving imap.authMethod unset makes
git imap-send use the basic IMAP plaintext LOGIN command.
Signed-off-by: Tony Finch <dot@dotat.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hints in SubmittingPatches about stopping GMail from clobbering
patches are widely useful both as examples of "git send-email" and
"git imap-send" usage.
Move the documentation to the appropriate places.
While at it, don't encourage storing passwords in config files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
There is a documented limitation on the body of any email not being
able to contain lines starting with "From ". This patch removes that
limitation by improving the parser to search for "From", "Date", and
"Subject" fields in the email before considering it to be an email.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CRAM-MD5 authentication ought to be independent from SSL, but NO_OPENSSL
build will not support this because the base64 and md5 code are used from
the OpenSSL library in this implementation.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
* maint:
Describe fixes since 1.6.2.3
doc/git-daemon: add missing arguments to max-connections option
doc/git-daemon: add missing arguments to options
init: Do not segfault on big GIT_TEMPLATE_DIR environment variable
imap-send: use correct configuration variable in documentation
Many e-mail based development communities require non-flowed text to carry
patches to prevent whitespaces from getting mangled, but there is no easy
way to tell Thunderbird MUA not to use format=flowed, unless you configure
it to do so unconditionally for all outgoing mails.
A workaround for users who use git-imap-send is to wrap the patch in "pre"
element in the draft folder as an HTML message, and tell Thunderbird to
send "text only". Thunderbird turns such a message into a non-flowed
plain text when sending it out, which is what we want for patch e-mails.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the description to be similar to that used for git-send-email(1) to
give a better description of what the tool can be used for and sound more
user-friendly.
Document the configuration variables used by git-imap-send, split the
example into tunnel and direct examples. Rephrase other parts of the
git-imap-send documentation to use better grammar and to be clearer.
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow SSL to be used when a imaps:// URL is used for the host name.
Also, automatically use TLS when not using imaps:// by using the IMAP
STARTTLS command, if the server supports it.
Tested with Courier and Gimap IMAP servers.
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move incorrect asciidoc level 2 titles back to level 1.
Show output of git-name-rev in man page example.
Reword sentences that begin with a period (.) in asciidoc
numbered lists to work around conversion to man page bug.
Mention that git-repack now calls git-prune-packed
when the -d option is passed to it.
[imap] section headers in the config file example need to be
contained in a literal block. imap.pass is the proper config
file variable to use, not imap.password.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>