When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for a future patch adding a boolean parameter to
repo_interpret_branch_name(), which might be easily confused with an
existing unsigned int parameter, refactor repo_interpret_branch_name()
to take an option struct instead of the unsigned int parameter.
The static function interpret_branch_mark() is also updated to take the
option struct in preparation for that future patch, since it will also
make use of the to-be-introduced boolean parameter.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2.28-rc0, we corrected a bug that some repository extensions are
honored by mistake even in a version 0 repositories (these
configuration variables in extensions.* namespace were supposed to
have special meaning in repositories whose version numbers are 1 or
higher), but this was a bit too big a change.
* jn/v0-with-extensions-fix:
repository: allow repository format upgrade with extensions
Revert "check_repository_format_gently(): refuse extensions for old repositories"
Now that we officially permit repository extensions in repository
format v0, permit upgrading a repository with extensions from v0 to v1
as well.
For example, this means a repository where the user has set
"extensions.preciousObjects" can use "git fetch --filter=blob:none
origin" to upgrade the repository to use v1 and the partial clone
extension.
To avoid mistakes, continue to forbid repository format upgrades in v0
repositories with an unrecognized extension. This way, a v0 user
using a misspelled extension field gets a chance to correct the
mistake before updating to the less forgiving v1 format.
While we're here, make the error message for failure to upgrade the
repository format a bit shorter, and present it as an error, not a
warning.
Reported-by: Huan Huan Chen <huanhuanchen@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the primary branch in existing repositories, and the
default name used for the first branch in newly created
repositories, is made configurable, so that we can eventually wean
ourselves off of the hardcoded 'master'.
* js/default-branch-name:
contrib: subtree: adjust test to change in fmt-merge-msg
testsvn: respect `init.defaultBranch`
remote: use the configured default branch name when appropriate
clone: use configured default branch name when appropriate
init: allow setting the default for the initial branch name via the config
init: allow specifying the initial branch name for the new repository
docs: add missing diamond brackets
submodule: fall back to remote's HEAD for missing remote.<name>.branch
send-pack/transport-helper: avoid mentioning a particular branch
fmt-merge-msg: stop treating `master` specially
There is a growing number of projects and companies desiring to change
the main branch name of their repositories (see e.g.
https://twitter.com/mislav/status/1270388510684598272 for background on
this).
To change that branch name for new repositories, currently the only way
to do that automatically is by copying all of Git's template directory,
then hard-coding the desired default branch name into the `.git/HEAD`
file, and then configuring `init.templateDir` to point to those copied
template files.
To make this process much less cumbersome, let's introduce a new option:
`--initial-branch=<branch-name>`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In version 1 of repository format, "extensions" gained special meaning
and it is safer to avoid upgrading when there are pre-existing
extensions.
Make list-objects-filter to use the helper function instead of setting
repository version directly as a prerequisite of exposing the upgrade
capability.
Signed-off-by: Xin Li <delphij@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide more information (e.g. the object of the tree-ish in which
the blob being converted appears, in addition to its path, which
has already been given) to smudge/clean conversion filters.
* bc/filter-process:
t0021: test filter metadata for additional cases
builtin/reset: compute checkout metadata for reset
builtin/rebase: compute checkout metadata for rebases
builtin/clone: compute checkout metadata for clones
builtin/checkout: compute checkout metadata for checkouts
convert: provide additional metadata to filters
convert: permit passing additional metadata to filter processes
builtin/checkout: pass branch info down to checkout_worktree
SHA-256 transition continues.
* bc/sha-256-part-1-of-4: (22 commits)
fast-import: add options for rewriting submodules
fast-import: add a generic function to iterate over marks
fast-import: make find_marks work on any mark set
fast-import: add helper function for inserting mark object entries
fast-import: permit reading multiple marks files
commit: use expected signature header for SHA-256
worktree: allow repository version 1
init-db: move writing repo version into a function
builtin/init-db: add environment variable for new repo hash
builtin/init-db: allow specifying hash algorithm on command line
setup: allow check_repository_format to read repository format
t/helper: make repository tests hash independent
t/helper: initialize repository if necessary
t/helper/test-dump-split-index: initialize git repository
t6300: make hash algorithm independent
t6300: abstract away SHA-1-specific constants
t: use hash-specific lookup tables to define test constants
repository: require a build flag to use SHA-256
hex: add functions to parse hex object IDs in any algorithm
hex: introduce parsing variants taking hash algorithms
...
Now that we have the codebase wired up to pass any additional metadata
to filters, let's collect the additional metadata that we'd like to
pass.
The two main places we pass this metadata are checkouts and archives.
In these two situations, reading HEAD isn't a valid option, since HEAD
isn't updated for checkouts until after the working tree is written and
archives can accept an arbitrary tree. In other situations, HEAD will
usually reflect the refname of the branch in current use.
We pass a smaller amount of data in other cases, such as git cat-file,
where we can really only logically know about the blob.
This commit updates only the parts of the checkout code where we don't
use unpack_trees. That function and callers of it will be handled in a
future commit.
In the archive code, we leak a small amount of memory, since nothing we
pass in the archiver argument structure is freed.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit continues the work started with previous commit.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Returning a shared buffer invites very subtle bugs due to reentrancy or
multi-threading, as demonstrated by the previous patch.
There was an unfinished effort to abolish this [1].
Let's finally rid of `real_path()`, using `strbuf_realpath()` instead.
This patch uses a local `strbuf` for most places where `real_path()` was
previously called.
However, two places return the value of `real_path()` to the caller. For
them, a `static` local `strbuf` was added, effectively pushing the
problem one level higher:
read_gitfile_gently()
get_superproject_working_tree()
[1] https://lore.kernel.org/git/1480964316-99305-1-git-send-email-bmwill@google.com/
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`real_path()` returns result from a shared buffer, inviting subtle
reentrance bugs. One of these bugs occur when invoked this way:
set_git_dir(real_path(git_dir))
In this case, `real_path()` has reentrance:
real_path
read_gitfile_gently
repo_set_gitdir
setup_git_env
set_git_dir_1
set_git_dir
Later, `set_git_dir()` uses its now-dead parameter:
!is_absolute_path(path)
Fix this by using a dedicated `strbuf` to hold `strbuf_realpath()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we perform a clone, we won't know the remote side's hash algorithm
until we've read the heads. Consequently, we'll need to rewrite the
repository format version and hash algorithm once we know what the
remote side has. Move the code that does this into its own function so
that we can call it from clone in the future.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the user to specify the hash algorithm on the command line by
using the --object-format option to git init. Validate that the user is
not attempting to reinitialize a repository with a different hash
algorithm. Ensure that if we are writing a non-SHA-1 repository that we
set the repository version to 1 and write the objectFormat extension.
Restrict this option to work only when ENABLE_SHA256 is set until the
codebase is in a situation to fully support this.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we will want to not only check the repository format, but
extract the information that we've gained. To do so, allow
check_repository_format to take a pointer to struct repository_format.
Allow passing NULL for this argument if we're not interested in the
information, and pass NULL for all existing callers. A future patch
will make use of this information.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are some places where we need to parse a hex object ID in any
algorithm without knowing beforehand which algorithm is in use. An
example is when parsing fast-import marks.
Add a get_oid_hex_any to parse an object ID and return the algorithm it
belongs to, and additionally add parse_oid_hex_any which is the
equivalent change for parse_oid_hex. If the object is not parseable, we
return GIT_HASH_UNKNOWN.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce variants of get_oid_hex and parse_oid_hex that parse an
arbitrary hash algorithm, implementing internal functions to avoid
duplication. These functions can be used in the transport code to parse
refs properly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths were given a repository instance as a parameter to
work in the repository, but passed the_repository instance to its
callees, which has been cleaned up (somewhat).
* mt/use-passed-repo-more-in-funcs:
sha1-file: allow check_object_signature() to handle any repo
sha1-file: pass git_hash_algo to hash_object_file()
sha1-file: pass git_hash_algo to write_object_file_prepare()
streaming: allow open_istream() to handle any repo
pack-check: use given repo's hash_algo at verify_packfile()
cache-tree: use given repo's hash_algo at verify_one()
diff: make diff_populate_filespec() honor its repo argument
Some callers of check_object_signature() can work on arbitrary
repositories, but the repo does not get passed to this function.
Instead, the_repository is always used internally. To fix possible
inconsistencies, allow the function to receive a struct repository and
make those callers pass on the repo being handled.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some file system monitors might not use or take a timestamp for processing
and in the case of watchman could have race conditions with using a
timestamp. Watchman uses something called a clockid that is used for race
free queries to it. The clockid for watchman is simply a string.
Change the fsmonitor_last_update from being a uint64_t to a char pointer
so that any arbitrary data can be stored in it and passed back to the
fsmonitor.
Signed-off-by: Kevin Willford <Kevin.Willford@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the core.sparseCheckoutCone config setting was added in
879321eb0b ("sparse-checkout: add 'cone' mode" 2019-11-21), the
variables storing the config values for core.sparseCheckout and
core.sparseCheckoutCone were rearranged in cache.h, but in doing
so the "extern" keyword was dropped.
While we are tending to drop the "extern" keyword for function
declarations, it is still necessary for global variables used
across multiple *.c files. The impact of not having the extern
keyword may be unpredictable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
* hw/doc-in-header:
trace2: move doc to trace2.h
submodule-config: move doc to submodule-config.h
tree-walk: move doc to tree-walk.h
trace: move doc to trace.h
run-command: move doc to run-command.h
parse-options: add link to doc file in parse-options.h
credential: move doc to credential.h
argv-array: move doc to argv-array.h
cache: move doc to cache.h
sigchain: move doc to sigchain.h
pathspec: move doc to pathspec.h
revision: move doc to revision.h
attr: move doc to attr.h
refs: move doc to refs.h
remote: move doc to remote.h and refspec.h
sha1-array: move doc to sha1-array.h
merge: move doc to ll-merge.h
graph: move doc to graph.h and graph.c
dir: move doc to dir.h
diff: move doc to diff.h and diffcore.h
When a large repository has many sparse-checkout patterns, the
process for updating the skip-worktree bits can take long enough
that a user gets confused why nothing is happening. Update the
clear_ce_flags() method to write progress.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the documentation from Documentation/technical/api-allocation-growing.txt
to cache.h as it's easier for the developers to find the usage
information beside the code instead of looking for it in another doc file.
Also documentation/technical/api-allocation-growing.txt is removed because the
information it has is now redundant and it'll be hard to keep it up to
date and synchronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's only a single caller left of sha1_to_hex(), since everybody
that has an object name in "unsigned char[]" now uses hash_to_hex()
instead.
This case is in the sha1dc wrapper, where we print a hex sha1 when
we find a collision. This one will always be sha1, regardless of the
current hash algorithm, so we can't use hash_to_hex() here. In
practice we'd probably not be running sha1 at all if it isn't the
current algorithm, but it's possible we might still occasionally
need to compute a sha1 in a post-sha256 world.
Since sha1_to_hex() is just a wrapper for hash_to_hex_algop(), let's
call that ourselves. There's value in getting rid of the sha1-specific
wrapper to de-clutter the global namespace, and to make sure nobody uses
it (and as with sha1_to_hex_r() in the previous patch, we'll drop the
coccinelle transformations, too).
The sha1_to_hex() function is mentioned in a comment; we can easily
swap that out for oid_to_hex() to give a better example. Also
update the comment that was left stale when we added "struct
object_id *" as a way to name an object and added functions to
convert it to hex.
The function is also mentioned in some test vectors in t4100, but
that's not runnable code, so there's no point in trying to clean it
up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left; everybody uses oid_to_hex_r() or
hash_to_hex_algop_r(). This used to actually be the underlying
implementation for oid_to_hex_r(), but that's no longer the case since
47edb64997 (hex: introduce functions to print arbitrary hashes,
2018-11-14).
Let's get rid of it to de-clutter and to make sure nobody uses it.
Likewise we can drop the coccinelle rules that mention it, since the
compiler will make it quite clear that the code does not work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI updates.
* js/azure-pipelines-msvc:
ci: also build and test with MS Visual Studio on Azure Pipelines
ci: really use shallow clones on Azure Pipelines
tests: let --immediate and --write-junit-xml play well together
test-tool run-command: learn to run (parts of) the testsuite
vcxproj: include more generated files
vcxproj: only copy `git-remote-http.exe` once it was built
msvc: work around a bug in GetEnvironmentVariable()
msvc: handle DEVELOPER=1
msvc: ignore some libraries when linking
compat/win32/path-utils.h: add #include guards
winansi: use FLEX_ARRAY to avoid compiler warning
msvc: avoid using minus operator on unsigned types
push: do not pretend to return `int` from `die_push_simple()`
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
"git stash" learned to write refreshed index back to disk.
* tg/stash-refresh-index:
stash: make sure to write refreshed cache
merge: use refresh_and_write_cache
factor out refresh_and_write_cache function
MSVC complains about this with `-Wall`, which can be taken as a sign
that this is indeed a real bug. The symptom is:
C4146: unary minus operator applied to unsigned type, result
still unsigned
Let's avoid this warning in the minimal way, e.g. writing `-1 -
<unsigned value>` instead of `-<unsigned value> - 1`.
Note that the change in the `estimate_cache_size()` function is
needed because MSVC considers the "return type" of the `sizeof()`
operator to be `size_t`, i.e. unsigned, and therefore it cannot be
negated using the unary minus operator.
Even worse, that arithmetic is doing extra work, in vain. We want to
calculate the entry extra cache size as the difference between the
size of the `cache_entry` structure minus the size of the
`ondisk_cache_entry` structure, padded to the appropriate alignment
boundary.
To that end, we start by assigning that difference to the `per_entry`
variable, and then abuse the `len` parameter of the
`align_padding_size()` macro to take the negative size of the ondisk
entry size. Essentially, we try to avoid passing the already calculated
difference to that macro by passing the operands of that difference
instead, when the macro expects operands of an addition:
#define align_padding_size(size, len) \
((size + (len) + 8) & ~7) - (size + len)
Currently, we pass A and -B to that macro instead of passing A - B and
0, where A - B is already stored in the `per_entry` variable, ready to
be used.
This is neither necessary, nor intuitive. Let's fix this, and have code
that is both easier to read and that also does not trigger MSVC's
warning.
While at it, we take care of reporting overflows (which are unlikely,
but hey, defensive programming is good!).
We _also_ take pains of casting the unsigned value to signed: otherwise,
the signed operand (i.e. the `-1`) would be cast to unsigned before
doing the arithmetic.
Helped-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getting the lock for the index, refreshing it and then writing it is a
pattern that happens more than once throughout the codebase, and isn't
trivial to get right. Factor out the refresh_and_write_cache function
from builtin/am.c to read-cache.c, so it can be re-used in other
places in a subsequent commit.
Note that we return different error codes for failing to refresh the
cache, and failing to write the index. The current caller only cares
about failing to write the index. However for other callers we're
going to convert in subsequent patches we will need this distinction.
Helped-by: Martin Ågren <martin.agren@gmail.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Commit b841d4ff43 (Add `human` format to test-tool, 2019-01-28) added
a get_time() function which allows $GIT_TEST_DATE_NOW in the
environment to override the current time. So we no longer need to
interpret that variable in cmd__date().
Therefore, we can stop passing the "now" parameter down through the
date functions, since nobody uses them. Note that we do need to make
sure all of the previous callers that took a "now" parameter are
correctly using get_time().
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the existing uses of null_sha1 can be converted into uses of
null_oid, so do so. Remove null_sha1 and is_null_sha1, and define
is_null_oid in terms of null_oid. This also has the additional benefit
of removing several uses of sha1_to_hex.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tree-walk API learned to pass an in-core repository
instance throughout more codepaths.
* nd/tree-walk-with-repo:
t7814: do not generate same commits in different repos
Use the right 'struct repository' instead of the_repository
match-trees.c: remove the_repo from shift_tree*()
tree-walk.c: remove the_repo from get_tree_entry_follow_symlinks()
tree-walk.c: remove the_repo from get_tree_entry()
tree-walk.c: remove the_repo from fill_tree_descriptor()
sha1-file.c: remove the_repo from read_object_with_reference()
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
Introduce a new macro ALLOC_GROW_BY which automatically zeros the added
array elements and takes care of updating the nr value. Use the macro in
code introduced earlier in this patchset.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can have a different default partial clone filter for
each promisor remote, let's hide core_partial_clone_filter_default
as a static in promisor-remote.c to avoid it being use for
anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have has_promisor_remote() and can use many
promisor remotes, let's hide repository_format_partial_clone
as a static in promisor-remote.c to avoid it being use
for anything other than managing backward compatibility.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a couple of places where we want to clear the last line on
the terminal, e.g. when a progress bar line is overwritten by a
shorter line, then the end of that progress line would remain visible,
unless we cover it up.
In 'progress.c' we did this by always appending a fixed number of
space characters to the next line (even if it was not shorter than the
previous), but as it turned out that fixed number was not quite large
enough, see the fix in 9f1fd84e15 (progress: clear previous progress
update dynamically, 2019-04-12). From then on we've been keeping
track of the length of the last displayed progress line and appending
the appropriate number of space characters to the next line, if
necessary, but, alas, this approach turned out to be error prone, see
the fix in 1aed1a5f25 (progress: avoid empty line when breaking the
progress line, 2019-05-19). The next patch in this series is about to
fix a case where we don't clear the last line, and on occasion do end
up with such garbage at the end of the line. It would be great if we
could do that without the need to deal with that without meticulously
computing the necessary number of space characters.
So add a helper function to clear the last line on the terminal using
an ANSI escape sequence, which has the advantage to clear the whole
line no matter how wide it is, even after the terminal width changed.
Such an escape sequence is not available on dumb terminals, though, so
in that case fall back to simply print a whole terminal width (as
reported by term_columns()) worth of space characters.
In 'editor.c' launch_specified_editor() already used this ANSI escape
sequence, so replace it with a call to this function.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
