(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To complement the straightforward perl application in previous patch,
this adds a few manual changes.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older Gits talked about "updating" a file to add its content to the
index, but this terminology is confusing for new users. "to stage" is far
more intuitive and already used in e.g. the "git stage" command name.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually when applying a binary diff generated without
--binary, it will be rejected early, as we don't even have
the full sha1 of the pre- and post-images.
However, if the diff is generated with --full-index (but not
--binary), then we will actually try to apply it. If we have
the postimage blob, then we can take a shortcut and never
even look at the binary diff at all (e.g., this can happen
when rebasing changes within a repository).
If we don't have the postimage blob, though, we try to look
at the actual fragments, of which there are none, and get a
segfault. This patch checks explicitly for that case and
complains to the user instead of segfaulting. We need to
keep the check at a low level so that the "shortcut" case
above continues to work.
We also add a test that demonstrates the segfault. While
we're at it, let's also explicitly test the shortcut case.
Reported-by: Rafaël Carré <rafael.carre@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6df42ab (Add global and system-wide gitattributes, 2010-09-01) forgot
to quote one instance of $HOME in the tests. This would be valid
according to POSIX, but bash 4 helpfully declines to execute the
command in question with an "ambiguous redirection" error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/send-email-perl:
send-email: extract_valid_address use qr// regexes
send-email: is_rfc2047_quoted use qr// regexes
send-email: use Perl idioms in while loop
send-email: make_message_id use "require" instead of "use"
send-email: send_message die on $!, not $?
send-email: use (?:) instead of () if no match variables are needed
send-email: sanitize_address use qq["foo"], not "\"foo\""
send-email: sanitize_address use $foo, not "$foo"
send-email: use \E***\Q instead of \*\*\*
send-email: cleanup_compose_files doesn't need a prototype
send-email: unique_email_list doesn't need a prototype
send-email: file_declares_8bit_cte doesn't need a prototype
send-email: get_patch_subject doesn't need a prototype
send-email: use lexical filehandles during sending
send-email: use lexical filehandles for $compose
send-email: use lexical filehandle for opendir
Conflicts:
git-send-email.perl
* sb/send-email-use-to-from-input:
send-email: Don't leak To: headers between patches
send-email: Use To: headers in patch files
Conflicts:
git-send-email.perl
You can run "make DEFAULT_TEST_TARGET=prove test" to run the test under
"prove" (or $(PROVE) if set). The output is a bit easier to read when
running many tests in parallel.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Liked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to fix up a corrupt repository, one might prefer that
"update-index -h" print an accurate usage message and exit rather
than reading the repository and complaining about the corruption.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make sure "git <command> -h" works correctly
when run from distractingly bad repositories.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to avoid git <command> -h being distracted by
access to the repository. A caller hoping to use "git ls-files"
with an alternate index as part of a repair operation may well use
"git ls-files -h" to show usage while planning it out.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a request for command-line usage information rather than some
more substantial action, the only friendly thing to do is to report
the usage information as soon as possible and exit.
Without this change, as "git gc" glances over the repository, it can
be distracted by the desire to report a malformed configuration file.
Noticed while working through reports from Duy's repository access
checker.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" and "git commit" read .git/config and .gitmodules before
parsing options, but there is no reason to access a repository at all
when the caller just wanted to know what arguments are accepted.
[jn: rewrote the log message and added test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index loads the index before parsing options. Erroring out
is counterproductive at that point if the operator is hunting for a
command to recover useful data from the broken repository.
[jn: new commit message, tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for "git branch -h" to try to access a repository.
In the spirit of v1.6.6-rc0~34^2~3 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09). This brings git one step closer to
passing the following (automatically verifiable) test:
Before any repository access (aside from git_config()), a
function from the setup_git_directory_* family has been run
and thus one step closer to being able to use an automatic repository
access checker.
[jn: simplified; new commit message, test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config() function signals error by returning -1 in
two instances:
1. An actual error occurs in opening a config file (parse
errors cause an immediate die).
2. Of the three possible config files, none was found.
However, this second case is often not an error at all; it
simply means that the user has no configuration (they are
outside a repo, and they have no ~/.gitconfig file). This
can lead to confusing errors, such as when the bash
completion calls "git config --list" outside of a repo. If
the user has a ~/.gitconfig, the command completes
succesfully; if they do not, it complains to stderr.
This patch allows callers of git_config to distinguish
between the two cases. Error is signaled by -1, and
otherwise the return value is the number of files parsed.
This means that the traditional "git_config(...) < 0" check
for error should work, but callers who want to know whether
we parsed any files or not can still do so.
[jc: with tests from Jonathan]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line contains nothing but whitespace with at least one tab
and the core.whitespace config option contains blank-at-eol, the
whitespace on the line is being printed twice, once unhighlighted
(unless otherwise matched by one of the other core.whitespace values),
and a second time highlighted for blank-at-eol.
Update the leading indentation check to stop checking when it reaches
the trailing whitespace.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance the test_decode_color function to handle all common color codes,
including background colors and escapes that contain multiple codes.
This change necessitates changing <WHITE> to <BOLD>, so update t4034
as well.
This change is necessary for the next commit in order to test
background colors properly.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encode.pm started updating the string to decode in-place when a second
argument is passed in version 2.40.
This causes 'decode_utf8("", Encode::FB_CROAK)' to die with a message
like:
Modification of a read-only value attempted at .../Encode.pm line 216.
Work around this by passing an empty variable instead of a constant
string.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "shortlog" command defaults to HEAD only when its standard input is
connected to a terminal; otherwise it acts in the traditional "filter"
mode to read and summarize the "git log" output.
Two new tests added to t4203 assumed that the command always default to
HEAD, but when the standard input is closed (or connected to /dev/null),
it output empty, which is a summary of its empty input, causing the test
to break.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another test for the replace root feature. One can imagine an
implementation for which R "some/subdir" "" would free some state
associated to the subdir and leave fast-import confused.
Luckily, git's is not such an implementation.
While at it, change the previous test to use C "some/subdir" ""
instead of R (i.e., test both syntaxes).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/t9001-send-email.sh: fix stderr redirection in 'Invalid In-Reply-To'
Clarify and extend the "git diff" format documentation
git-show-ref.txt: clarify the pattern matching
documentation: git-config minor cleanups
Update test script annotate-tests.sh to handle missing/extra authors
The current script used by annotate-tests.sh (used by t8001 and t8002) fails
to emit a warning if any of the expected authors never show up in the output
or if authors that show up in the output were never specified as expected.
Update the script to fail in both of these scenarios.
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option -e (or --show-email) to git-blame that will display
the author's email instead of name on each line. This option works
for both git-blame and git-annotate.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tree_content_set() is asked to modify the path "foo/bar/",
it first recurses like so:
tree_content_set(root, "foo/bar/", sha1, S_IFDIR) ->
tree_content_set(root:foo, "bar/", ...) ->
tree_content_set(root:foo/bar, "", ...)
And as a side-effect of 2794ad5 (fast-import: Allow filemodify to set
the root, 2010-10-10), this last call is accepted and changes
the tree entry for root:foo/bar to refer to the specified tree.
That seems safe enough but let's reject the new syntax (we never meant
to support it) and make it harder for frontends to introduce pointless
incompatibilities with git fast-import 1.7.3.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until M 040000 <tree> "" syntax was introduced in commit 2794ad5
(fast-import: Allow filemodify to set the root, 2010-10-10), it
was impossible for the root entry to refer to an unloaded tree.
Update various functions to take that possibility into account.
Otherwise
M 040000 <tree> ""
M 100644 :1 "foo"
and similar commands (using D, C, or R after resetting the root
tree) segfault.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing via builtin transports (like file://, git://), the
underlying transport helper (in this case, git-pack-objects) did not get
the --progress option, even if it was passed to git push.
Fix this, and update the tests to reflect this.
Note that according to the git-pack-objects documentation, we can safely
apply the usual --progress semantics for the transport commands like
clone and fetch (and for pushing over other smart transports).
Reported-by: Chase Brammer <cbrammer@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Chase Brammer <cbrammer@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For terminal tests that capture output/stderr, the TTY prerequisite
warning does not quite work for commands like
test_terminal foo >out 2>err
because the warning gets "swallowed" up by the redirection that's
supposed only to be done by the subcommand.
Even worse, the outcome depends on whether stdout was already a
terminal (in which case test_terminal is a noop) or not (in which case
test_terminal introduces a pseudo-tty in the middle of the pipeline).
$ test_terminal.perl sh -c 'test -t 1 && echo >&2 YES' >out
YES
$ sh -c 'test -t 1 && echo >&2 YES' >out
$
So:
- use the test_terminal script even when running with "-v".
- skip tests that require a terminal when the test_terminal
script is unusable because IO::Pty is not installed.
- write the "need to declare TTY prerequisite" message to fd 4,
where it will be printed when running tests with -v, rather
than being swallowed up by an unrelated redireciton.
Noticed-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to forget to declare the TTY prerequisite when
writing tests on a system where it would always be satisfied
(because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16
for example). Automatically detect this problem so there is
no need to remember.
test_terminal: need to declare TTY prerequisite
test_must_fail: command not found: test_terminal echo hi
test_terminal returns status 127 in this case to simulate
not being available.
Also replace the SIMPLEPAGERTTY prerequisite on one test with
"SIMPLEPAGER,TTY", since (1) the latter is supported now and
(2) the prerequisite detection relies on the TTY prereq being
explicitly declared.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is plumbing to prepare helpers like test_terminal to notice buggy
test scripts that do not declare all of the necessary prerequisites.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some outputs (like the pager) care whether stdout is a
terminal. Others (like progress meters) care about stderr.
This patch sets up both. Technically speaking, we could go
further and set up just one (because either the other goes
to a terminal, or because our tests are only interested in
one). This patch does both to keep the interface to
lib-terminal simple.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other tests besides the pager ones may want to check how we handle
output to a terminal. This patch makes the code reusable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b541248 (merge.conflictstyle: choose between "merge" and "diff3
-m" styles, 2008-08-29), git-merge-file uses setup_directory_gently(),
thus cd'ing around to find any possible config files to use.
This broke merge-file when it is called from within a subdirectory of
a repository, and the arguments are all relative paths.
Fix by prepending the prefix, as passed down from the main git
setup code, if there is any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A seemingly innocuous change like adding test_tick somewhere can
completely upset the final mailmap test, since it checks commit
hashes and dates. Make the test less fragile by fuzzing away the
unpredictable parts and leaving in the authors (which is what the
test is about, anyway).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whitespace check printed the value of the wrong variable, i.e. the
beginning of the block of blank lines at the EOF (possibly absent) in the
old file.
As "git diff --check" is used by users to check their changes before
making a commit, we should point at the line number in the file after
the change.
Signed-off-by: Christoph Mallon <christoph.mallon@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
Documentation: No argument of ALLOC_GROW should have side-effects
On an x86_64 system (F13-based), I ran these commands in an empty directory:
git init
printf '%s\n' \
'<jdoe@example.com> <jdoe@example.COM>' \
'John <jdoe@example.com>' > .mailmap
git shortlog < /dev/null
Here's the result:
(reading log message from standard input)
*** glibc detected *** git: free(): invalid pointer: 0x0000000000f53730 ***
======= Backtrace: =========
/lib64/libc.so.6[0x31ba875676]
git[0x48c2a5]
git[0x4b9858]
...
zsh: abort (core dumped) git shortlog
What happened?
Some .mailmap entry is of the <email1> <email2> form,
while a subsequent one looks like "User Name <Email2>,
and the two email addresses on the right are not identical
but are "equal" when using a case-insensitive comparator.
Then, when add_mapping is processing the latter line, new_email is NULL
and we free me->email, yet do not replace it with a new strdup'd string.
Thus, when later we attempt to use the buffer behind that ->email pointer,
we reference freed memory.
The solution is to free ->email and ->name only if we're about to replace them.
[jc: squashed in the tests from Jonathan]
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a submodule directory has not been filled by "git submodule update"
yet, then "git submodule sync" must still update the super-project's
configuration for submodule.<name>.url.
This situation occurs when switching between branches with a module from
different urls and other branches without the submodule.
Signed-off-by: Andreas Köhler <andi5.py@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like ‘-08:00’ instead of
‘-0800’ (e.g. http://lwn.net/Articles/131729/), so git apply would
fail to recognize the epoch timestamp of deleted files and would
create empty files instead. Teach it to support both formats, and add
a test case.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.3-rc0~75^2 (Teach fast-import to import subtrees named by tree id,
2010-06-30) has a shortcoming - it doesn't allow the root to be set.
Extend this behaviour by allowing the root to be referenced as the
empty path, "".
For a command (like filter-branch --subdirectory-filter) that wants
to commit a lot of trees that already exist in the object db, writing
undeltified objects as loose files only to repack them later can
involve a significant amount of overhead.
(23% slow-down observed on Linux 2.6.35, worse on Mac OS X 10.6)
Fortunately we have fast-import (which is one of the only git commands
that will write to a pack directly) but there is not an advertised way
to tell fast-import to commit a given tree without unpacking it.
This patch changes that, by allowing
M 040000 <tree id> ""
as a filemodify line in a commit to reset to a particular tree without
any need to parse it. For example,
M 040000 4b825dc642 ""
is a synonym for the deleteall command and the fast-import equivalent of
git read-tree 4b825dc642
Signed-off-by: David Barr <david.barr@cordelta.com>
Commit-message-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Tested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the work tree contains an untracked file x, and
unpack-trees wants to checkout a path x/*, the
file x is removed unconditionally.
Instead, apply the same checks that are normally
used for untracked files, and abort if the file
cannot be removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Use the test_commit and test_path_is_missing
functions from the test library.
Also make sure that a merge which fails due to
pre-merge checks aborts properly and does not
leave MERGE_HEAD behind.
The "will not overwrite removed file" test is an
exception to this. It notices the untracked file
at a stage where the merge is already well under
way. Therefore we cannot abort the merge without
major restructuring. See the following thread for
more details.
http://mid.gmane.org/7vskopwxej.fsf@gitster.siamese.dyndns.org
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
The commit 7ce896b (Enable highlight executable path as a
configuration option, 2010-09-21) forgot to update t9500 test.
While at it, describe highlight test better.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove a call to 'git config --unset difftool.prompt', since that is
already unset by restore_test_defaults.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also prefix several relevant git merge commands with 'test_must_fail' to
keep the tests passing.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also move repeated tag and branch deletions into a separate setup test, to
avoid failures from tags and branches having already been deleted.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a couple test_must_fail invocations where needed, and avoid
one-shot environment variable export and function calls.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 8b12413 (color: allow multiple attributes 2010-02-27),
diff.color.new has been unused in t4026, so also remove the final unsetting
of that value to make the third to last test pass with appropriate
'&&' chaining.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add test_might_fail in front of the git_config --unset commands that
may be trying to unset a value that never got set (due to a previous
failing test) or that were already unset.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also replace '|| return 1' by '&&' to allow chain of operations to be
checked for proper return status, and modify the update-index command
as suggested by Jonathan Nieder to not exit early but try to make sure
files that match the work tree are marked as matching.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, replace "|| return 1" with "&&" in order to keep commands chained.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit takes advantage of Ævar Arnfjörð Bjarmason's recent change
to test_expect_code (test-lib: make test_expect_code a test command) to
simplify several testcases.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change test_expect_code to be a normal test command instead of a
top-level command.
As a top-level command it would fail in cases like:
test_expect_code 1 'phoney' '
foo && bar && (exit 1)
'
Here the test might incorrectly succeed if "foo" or "bar" happened to
fail with exit status 1. Instead we now do:
test_expect_success 'phoney' '
foo && bar && test_expect_code 1 "(exit 1)"
'
Which will only succeed if "foo" and "bar" return status 0, and "(exit
1)" returns status 1. Note that test_expect_code has been made slightly
noisier, as it reports the exit code it receives even upon success.
Some test code in t0000-basic.sh relied on the old semantics of
test_expect_code to test the test_when_finished command. I've
converted that code to use an external test similar to the TODO test I
added in v1.7.3-rc0~2^2~3.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-clone: describe --mirror more verbosely
do not depend on signed integer overflow
work around buggy S_ISxxx(m) implementations
xdiff: cast arguments for ctype functions to unsigned char
init: plug tiny one-time memory leak
diffcore-pickaxe.c: remove unnecessary curly braces
t3020 (ls-files-error-unmatch): remove stray '1' from end of file
setup: make sure git dir path is in a permanent buffer
environment.c: remove unused variable
git-svn: fix processing of decorated commit hashes
git-svn: check_cherry_pick should exclude commits already in our history
Documentation/git-svn: discourage "noMetadata"
If the first patch in a series has a To: header in the file and the
second patch in the series doesn't the address from the first patch will
be part of the To: addresses in the second patch. Fix this by treating the
to list like the cc list. Have an initial to list come from the command
line, user input and config options. Then build up a to list from each
patch and concatenate the two together before sending the patch. Finally,
reset the list after sending each patch so the To: headers from a patch
don't get used for the next one.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon program invocation, MSYS converts environment variables containing
path-like values from Unix-style to DOS-style under the assumption that
the program being invoked understands only DOS-style pathnames. For
instance, the Unix-style path /msysgit is translated to c:/msysgit. For
test t5560, the path being requested from git-http-backend is specified
via environment variable PATH_INFO as a URL path of the form
/repo.git/foobar, which git-http-backend combines with GIT_PROJECT_ROOT
to determine the actual physical path within the repository. This is a
case where MSYS's conversion of the path-like value of PATH_INFO causes
harm, for two reasons. First, the resulting converted path, when joined
with GIT_PROJECT_ROOT is bogus (for instance,
"C:/msysgit/git/t/trash-zzz/C:/msysgit/repo.git/HEAD"). Second, the
converted PATH_INFO path is rejected by git-http-backend as an 'alias'
due to validation failure on the part of daemon_avoid_alias().
Unfortunately, the standard work-around of doubling the leading slash
(i.e. //repo.git/foobar) to suppress MSYS path conversion works only for
command-line arguments, but not for environment variables.
Consequently, side step the problem by instead passing git-http-backend
an already-constructed full path rather than components GIT_PROJECT_ROOT
and PATH_INFO.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
By default, MSYS sed throws away CR from CRLF line-endings. Tests
t6038.5 and t6038.6 employ sed to normalize conflict output of git-merge
for validation purposes. These tests expect CRLF line-endings to be
present in the normalized output of git-merge, and thus fail when sed
undesirably removes CR. Fix by employing sed's -b/--binary switch to
suppress its default behavior of dropping CR characters.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
By default, MSYS grep reads in text-mode and converts CRLF into LF line
endings. For testing HTTP use binary mode (-U) as checking is done for
CR in HTTP headers
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
These two tests fail on msysGit because /dev/null is an alias for nul on
Windows and when reading the value back from git config the alias does
not match the real filename. Also the HOME environment variable has a
unix-style path but git returns a native equivalent path for '~'. As
these are platform-dependent equivalent results it seems simplest to
skip the test entirely.
Moves the NOT_MINGW prereq from t5503 into the test library.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* maint:
Fix typo in pack-objects' usage
Make sure that git_getpass() never returns NULL
t0004 (unwritable files): simplify error handling
rev-list-options: clarify --parents and --children
Change `while(<$fh>) { my $c = $_' to `while(my $c = <$fh>) {', and
use `chomp $c' instead of `$c =~ s/\n$//g;', the two are equivalent in
this case.
I've also changed the --cccmd test so that we test for the stripping
of whitespace at the beginning of the lines returned from the
--cccmd. I think we probably shouldn't do this, but it was there
already so I haven't changed the behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can set the GITWEB_TEST_INSTALLED environment variable to the
gitwebdir (the directory where gitweb is installed / deployed to) of
an existing gitweb instalation, or to the pathname of installed gitweb
script, to test that installation.
This change is intended to make it possible to test that process of
installing gitweb and the modules it depends on works correctly (after
splitting gitweb).
If GITWEB_TEST_INSTALLED is used, print what script are we testing
to make it easy to spot that we test installed gitweb.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of
... normal test script ...
status=$?
... cleanup ...
(exit $status)
set up cleanup commands with test_when_finished. This makes the
test script a little shorter, and more importantly, it ensures errors
during cleanup are reported.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are unmerged entries present, make sure to check for D/F
conflicts first and remove any files present in HEAD that would be in the
way of creating files below the correspondingly named directory. Such
files will be processed again at the end of the merge in
process_df_entry(); at that time we will be able to tell if we need to
and can reinstate the file, whether we need to place its contents in a
different file due to the directory still being present, etc.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all the paths below some directory involved in a D/F conflict were not
removed during the rest of the merge, then the contents of the file whose
path conflicted needs to be recorded in file with an alternative filename.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all the paths below some directory involved in a D/F conflict were not
removed during the rest of the merge, then the contents of the file whose
path conflicted needs to be recorded in file with an alternative filename.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is called from process_df_entry(), near the end of the merge.
Rather than just checking whether one of the sides of the merge had a
directory at the same path as one of our files, check whether that
directory is still present by this point of our merge.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all the paths below some directory involved in a D/F conflict were not
removed during the rest of the merge, then the contents of the file whose
path conflicted needs to be recorded in file with an alternative filename.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the handling of content merging for renames from process_renames() to
process_df_entry().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the handling of rename/rename conflicts where one file is renamed to
two different files, from process_renames() to process_df_entry().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit moves A to B while another commit created B (or moved C to
B), and these two different commits serve as different merge-bases for a
later merge, c94736a (merge-recursive: don't segfault while handling
rename clashes 2009-07-30) added some special code to avoid segfaults.
Since that commit, the two versions of B are merged in place (which could
be potentially conflicting) and the intermediate result is used as the
virtual ancestor.
However, right before this special merge, try_merge was turned on, meaning
that process_renames() would try an alternative merge that ignores the
'add' part of the conflict, and, if the merge is clean, store that as the
new virtual ancestor. This could cause incorrect merging of criss-cross
merges; it would typically result in just recording a slightly confusing
merge base, but in some cases it could cause silent acceptance of one side
of a merge as the final resolution when a conflict should have been
flagged.
When we do a special merge for such a rename/add conflict between
merge-bases, turn try_merge off to avoid an inappropriate second merge.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If merging two lines of development involves a rename/add conflict, and two
different people make such a merge but resolve it differently, and then
someone tries to merge the resulting two merges, then they should clearly
get a conflict due to the different resolutions from the previous
developers. However, in some such cases the conflict would not be detected
and git would silently accept one of the two versions being merged as the
final merge resolution.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c94736a (merge-recursive: don't segfault while handling rename clashes
2009-07-30) added t6036 with a testcase that involved dual renames and a
criss-cross merge. Add a test that is nearly identical, but which also
involves content modification -- a case git currently does not merge
correctly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c94736a (merge-recursive: don't segfault while handling rename clashes
2009-07-30) added this testcase with an interesting corner case test,
which previously had cased git to segfault. This test ensures that the
segfault does not return and that the merge correctly fails; just add
some checks that verify the state of the index and worktree after the merge
are correct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests where one file is renamed to two different paths in different
sides of history, and where each of the new files matches the name of a
directory from the opposite side of history. Include tests for both the
case where the merge results in those directories not being cleanly
removed, and where those directories are cleanly removed during the merge.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interesting testcase is having two files each in their own subdirectory
getting renamed to the toplevel at the directory pathname of the other.
Questions arise as to whether the order of operations matters and whether
the directories can correctly get out of the way and make room for the
new files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having the source of a rename be involved in a directory/file conflict does
not currently pose any difficulties to the current merge-recursive
algorithm (in contrast to destinations of renames and D/F conflicts).
However, combining the two seemed like good testcases to include for
completeness.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging two branches with some path involved in a D/F conflict, the
choice of which branch to merge into the other matters for (at least) two
reasons: (1) whether the working copy has a directory full of files that
is in the way of a file, or a file exists that is in the way of a
directory of files, (2) when the directory full of files does not disappear
due to the merge, what files at the same paths should be renamed to
(e.g. filename~HEAD vs. filename~otherbranch).
Add some tests that reverse the merge order of two other tests, and which
verify the contents are as expected (namely, that the results are identical
other than modified-for-uniqueness filenames involving branch names).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testing of the various ways that a renamed file to a path involved in
a directory/file conflict may be involved in. This includes whether or not
there are conflicts of the contents of the renamed file (if the file was
modified on both sides of history), and whether the directory from the
other side of the merge will disappear as a result of the merge or not.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous D/F fixes I submitted (5a2580d and ae74548) had caused merge to
become excessively spammy, which was fixed in 96ecac6 (merge-recursive:
Avoid excessive output for and reprocessing of renames 2010-08-20). Add a
new test to avoid repeating that mistake with my several upcoming changes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d5af510 (RE: [PATCH] Avoid rename/add conflict when contents are identical
2010-09-01) avoided erroring out in a rename/add conflict when the contents
were identical. A simpler fix could have handled that particular testcase,
but it would not correctly handle the case where a symlink is involved.
Add another testcase using symlinks, to avoid breaking that case.
Signed-off-by: Ken Schalk <ken.schalk@intel.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame --textconv is wrongly calling the textconv filter on
symlinks: symlinks are stored as blobs whose content is the target of
the link, and blame calls the textconv filter on a temporary file
filled-in with the content of this blob.
For example:
$ git blame -C -C regular-file.pdf
Error: May not be a PDF file (continuing anyway)
Error: PDF file is damaged - attempting to reconstruct xref table...
Error: Couldn't find trailer dictionary
Error: Couldn't read xref table
Warning: program returned non-zero exit code #1
fatal: unable to read files to diff
That errors come from pdftotext run on symlink.pdf being extracted to
/tmp/ with one-line plain-text content pointing to link destination.
So several failures are demonstrated here:
- git cat-file --textconv :symlink.bin # also HEAD:symlink.bin
- git blame --textconv symlink.bin
- git blame -C -C --textconv regular-file # but also looks on symlink.bin
At present they all fail with something like.
E: /tmp/j3ELEs_symlink.bin is not "binary" file
NOTE: git diff doesn't try to textconv the pathnames, it runs the
textual diff without textconv, which is the expected behavior.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The textconv filter is sometimes incorrectly ran on a temporary file
whose content is the target of a symbolic link, instead of actual file
content. Prepare to test this by marking the content of the file to
convert with "bin:", and let the helper die if "bin:" is not found in
the file content.
NOTE: I've changed $@ to $1 in helper becase textconv program "should
take a single argument" (see Documentation/gitattributes.txt), so
making this more explicit makes sense and also helps to avoid
problems with feeding arguments to echo.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/grep-header-all-match-fix:
log --author: take union of multiple "author" requests
grep: move logic to compile header pattern into a separate helper
* jc/pickaxe-grep:
diff/log -G<pattern>: tests
git log/diff: add -G<regexp> that greps in the patch text
diff: pass the entire diff-options to diffcore_pickaxe()
gitdiffcore doc: update pickaxe description
* rr/fmt-merge-msg:
t6200-fmt-merge-msg: Exercise '--log' to configure shortlog length
t6200-fmt-merge-msg: Exercise 'merge.log' to configure shortlog length
merge: Make 'merge.log' an integer or boolean option
merge: Make '--log' an integer option for number of shortlog entries
fmt_merge_msg: Change fmt_merge_msg API to accept shortlog_len
Conflicts:
builtin/merge.c
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash branch <branch> <stash>" started discarding the stash
when the branch creation fails. It should have kept the stash
intact when aborting.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This bug was disovered by someone on IRC when he tried to
$ git stash branch <branch> <stash>
while <branch> already existed. In that case the stash is dropped even
though it isn't applied on any branch, so the stash is effectively lost.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to use a command line --to-cmd=cmd
to create the list of "To:" addresses.
Used a shared routine for --cc-cmd and --to-cmd.
Did not use IPC::Open2, leaving that for Ævar if
ever he decides to fix the other bugs he might find.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test was missing some "&&" at the end of some lines and it
was wrong because, as the replacement refs were not fetched,
the commits from the parallel branch should not show up. This
was found by Elijah Newren.
This is fixed by checking that after the branch from HASH6 is
fetched, the commits from the parallel branch don't show up,
and then by fetching the replacement refs and checking that
they do show up afterwards.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a long time (29508e1 "Isolate shared HTTP request functionality", Fri
Nov 18 11:02:58 2005), we've followed HTTP redirects with
CURLOPT_FOLLOWLOCATION.
However, when the remote HTTP server returns a redirect the default
libcurl action is to change a POST request into a GET request while
following the redirect, but the remote http backend does not expect
that.
Fix this by telling libcurl to always keep the request as type POST with
CURLOPT_POSTREDIR.
For users of libcurl older than 7.19.1, use CURLOPT_POST301 instead,
which only follows 301s instead of both 301s and 302s.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems which have dash as /bin/sh, such as Ubuntu, the final
test (master@{n} for various n) fails with a syntax error while
processing an arithmetic expansion. The syntax error is caused by
using a bare name ('N') as a variable reference in the expression.
In order to avoid the syntax error, we spell the variable reference
as '$N' rather than simply 'N'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick will segfault when transplanting a root commit if the --ff
option is used. This happens because the "parent" pointer is set to NULL
when the commit being cherry-picked has no parents. Later, when "parent"
is dereferenced, the cherry-pick segfaults.
Fix this by checking whether "parent" is NULL before dereferencing it and
add a test for this case of cherry-picking a root commit with --ff.
Reported-by: Zbyszek Szmek <zbyszek@in.waw.pl>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-base between @$parents and $merge_tip may have been reached
through a merge commit. This means that some commits that are ancestors
of @$parents will not be ancestors of $merge_base. The mergeinfo
property will not list commits that are ancestors of @$parents, so we
need to explicitly exclude them.
[ew: squashed and cleaned up test case from Steven]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When we're diffing symlinks, we consider the contents to be
the pathname that the symlink points to. When a user sets up
a userdiff driver like "*.pdf diff=pdf", their "diff.pdf.*"
config generally tells us what to do with the content of
pdf files.
With the current code, we will actually process a symlink
like "link.pdf" using a configured pdf driver, meaning we
are using contents which consist of a pathname with
configuration that is expecting contents that consist of an
actual pdf file.
The most noticeable example of this would have been
textconv; however, it was already protected in its own
textconv-specific code path. We can still see the breakage
with something like "diff.*.binary", though. You could
also see it with diff.*.funcname, though it is a bit harder
to trigger accidentally there.
This patch adds a check for S_ISREG lower in the callstack
than the textconv-specific check, which should block use of
any userdiff config for non-regular files. We can drop the
check in the textconv code, which is now redundant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
t7003-filter-branch.sh had a make_commit() function that was identical
to test_commit() in test-lib.sh except that it used tr to create a
lowercase file name from the uppercase branch name instead of
appending ".t".
Not only is this unneeded code duplication, it also was something
simply waiting to fail on case-insensitive file systems. So replace
all uses of make_commit with test_commit.
While we're editing the setup, chain it together with && so that
failures early in the sequence don't get lost and add a commit graph.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the olden days,
log --author=me --committer=him --grep=this --grep=that
used to be turned into:
(OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(PATTERN this)
(PATTERN that))
showing my patches that do not have any "this" nor "that", which was
totally useless.
80235ba ("log --author=me --grep=it" should find intersection, not union,
2010-01-17) improved it greatly to turn the same into:
(ALL-MATCH
(HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR (PATTERN this) (PATTERN that)))
That is, "show only patches by me and committed by him, that have either
this or that", which is a lot more natural thing to ask.
We however need to be a bit more clever when the user asks more than one
"author" (or "committer"); because a commit has only one author (and one
committer), they ought to be interpreted as asking for union to be useful.
The current implementation simply added another author/committer pattern
at the same top-level for ALL-MATCH to insist on matching all, finding
nothing.
Turn
log --author=me --author=her \
--committer=him --committer=you \
--grep=this --grep=that
into
(ALL-MATCH
(OR (HEADER-AUTHOR me) (HEADER-AUTHOR her))
(OR (HEADER-COMMITTER him) (HEADER-COMMITTER you))
(OR (PATTERN this) (PATTERN that)))
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY/.." (both defined in
t/test-lib.sh) in t/gitweb-lib.sh. It better describes the intent.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds fortran xfuncname and wordRegex patterns to the list of builtin
patterns. The intention is for the patterns to be appropriate for all
versions of fortran including 77, 90, 95. The patterns can be enabled by
adding the diff=fortran attribute to the .gitattributes file for the
desired file glob.
This also adds a new macro named IPATTERN which is just like the PATTERNS
macro except it sets the REG_ICASE flag so that case will be ignored.
The test code in t4018 and the docs were updated as appropriate.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously (e3bf5e43), a test was added to test whether the builtin
xfuncname regular expressions could be compiled without error by regcomp.
Let's do the same for the word_regex patterns. This should help catch any
cross-platform incompatibilities that exist between the pattern creator's
system and the various platforms that the test suite is commonly run on.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6106ce46 introduced a test to demonstrate fetch's failure to
retrieve any objects or update FETCH_HEAD when it was supplied a repository
URL and the current branch had a configured merge spec. This commit
expands the original test based on comments from Junio Hamano. In addition
to actually verifying that the fetch updates FETCH_HEAD correctly, and does
not update the current branch, two more tests are added to ensure that the
merge configuration is ignored even when the supplied URL matches the URL
of the remote configured for the branch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On IRIX 6.5, the printf utility in /usr/bin does not appear to handle the
\ddd notation according to POSIX. This printf appears to halt processing
of the string argument and ignore any additional characters in the string.
Work around this flaw by replacing the \000's with 'Q' and using the
q_to_nul helper function provided by test-lib.sh
This problem with printf is not apparent when using the Bash shell since
Bash implements a POSIX compatible printf function internally.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In merge-recursive.c, whenever there was a rename where a file name on one
side of the rename matches a directory name on the other side of the merge,
then the very first check that
string_list_has_string(&o->current_directory_set, ren1_dst)
would trigger forcing it into marking it as a rename/directory conflict.
However, if the path is only renamed on one side and a simple three-way
merge between the separate files resolves cleanly, then we don't need to
mark it as a rename/directory conflict. So, we can simply move the check
for rename/directory conflicts after we've verified that there isn't a
rename/rename conflict and that a threeway content merge doesn't work.
This changes the particular error message one gets in the case where the
directory name that a file on one side of the rename matches is not also
part of the rename pair. For example, with commits containing the files:
COMMON -> (HEAD, MERGE )
--------- --------------- -------
sub/file1 -> (sub/file1, newsub)
<NULL> -> (newsub/newfile, <NULL>)
then previously when one tried to merge MERGE into HEAD, one would get
CONFLICT (rename/directory): Rename sub/file1->newsub in HEAD directory newsub added in merge
Renaming sub/file1 to newsub~HEAD instead
Adding newsub/newfile
Automatic merge failed; fix conflicts and then commit the result.
After this patch, the error message will instead become:
Removing newsub
Adding newsub/newfile
CONFLICT (file/directory): There is a directory with name newsub in merge. Adding newsub as newsub~HEAD
Automatic merge failed; fix conflicts and then commit the result.
That makes more sense to me, because git can't know that there's a conflict
until after it's tried resolving paths involving newsub/newfile to see if
they are still in the way at the end (and if newsub/newfile is not in the
way at the end, there should be no conflict at all, which did not hold with
git previously).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side of a file rename matches a directory name on the other side,
the recursive merge strategy will fail. This is true even if the merge is
trivially resolvable.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To achieve that, all cd commands which weren't inside a subshell had to
be put into a new one.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although the set_state command is not likely to fail, it is best to
stay in the habit of checking for failures.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is from 2007, which is late enough for the style to be
recognizably modern but still a while ago. Freshen it up to
follow new best practices:
- guard setup commands with test_expect_setup, so errors at
that stage can be caught;
- use <<\EOF in preference to <<EOF, to save reviewers the
trouble of looking for variable interpolations;
- use test_cmp instead of test "$foo" = "$bar", for better
output with -v on failure;
- indent commands in subshells and let them span multiple lines;
- combine the two "gitdir required mode" tests that do not make
as much sense alone.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure early failures are not masked by later successes.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsck test is generally careful to remove the corrupt objects
it inserts, but dangling objects are left behind due to some typos
and omissions. It is better to clean up more completely, to
simplify the addition of later tests. So:
- guard setup and cleanup with test_expect_success to catch
typos and errors;
- check both stdout and stderr when checking for empty fsck
output;
- use test_cmp empty file in place of test $(wc -l <file) = 0,
for better debugging output when running tests with -v;
- add a remove_object () helper and use it to replace broken
object removal code that forgot about the fanout in
.git/objects;
- disable gc.auto, to avoid tripping up object removal if the
number of objects ever reaches that threshold.
- use test_when_finished to ensure cleanup tasks are run and
succeed when tests fail;
- add a new final test that no breakage or dangling objects
was left behind.
While at it, add a brief description to test_description of the
history that is expected to persist between tests.
Part of a campaign to clean up subshell usage in tests.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format the subshells introduced by the previous patch (Several tests:
cd inside subshell instead of around, 2010-09-06) like so:
(
cd subdir &&
...
) &&
This is generally easier to read and has the nice side-effect that
this patch will show what commands are used in the subshell, making
it easier to check for lost environment variables and similar
behavior changes.
Cc: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to exercise the '--log' command-line option of 'git
fmt-merge-msg'. It controls the number of shortlog entries to display
in merge commit messages.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test to exercise the 'merge.log' configuration option of 'git
fmt-merge-msg'. It controls the number of shortlog entries to display
in merge commit messages.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/test-must-fail-missing:
tests: make test_might_fail fail on missing commands
tests: make test_might_fail more verbose
tests: make test_must_fail fail on missing commands
tests: make test_must_fail more verbose
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
Every so often, someone sends out an unedited cover-letter template.
Add a simple check to send-email that refuses to send if the subject
contains "*** SUBJECT HERE ***", with an option --force to override.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixed all places where it was a straightforward change from cd'ing into a
directory and back via "cd .." to a cd inside a subshell.
Found these places with "git grep -w "cd \.\.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
* ab/test-2: (51 commits)
tests: factor HOME=$(pwd) in test-lib.sh
test-lib: use subshell instead of cd $new && .. && cd $old
tests: simplify "missing PREREQ" message
t/t0000-basic.sh: Run the passing TODO test inside its own test-lib
test-lib: Allow overriding of TEST_DIRECTORY
test-lib: Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY"/../
test-lib: Use $TEST_DIRECTORY or $GIT_BUILD_DIR instead of $(pwd) and ../
test: Introduce $GIT_BUILD_DIR
cvs tests: do not touch test CVS repositories shipped with source
t/t9602-cvsimport-branches-tags.sh: Add a PERL prerequisite
t/t9601-cvsimport-vendor-branch.sh: Add a PERL prerequisite
t/t7105-reset-patch.sh: Add a PERL prerequisite
t/t9001-send-email.sh: convert setup code to tests
t/t9001-send-email.sh: change from skip_all=* to prereq skip
t/t9001-send-email.sh: Remove needless PROG=* assignment
t/t9600-cvsimport.sh: change from skip_all=* to prereq skip
lib-patch-mode tests: change from skip_all=* to prereq skip
t/t3701-add-interactive.sh: change from skip_all=* to prereq skip
tests: Move FILEMODE prerequisite to lib-prereq-FILEMODE.sh
t/Makefile: Create test-results dir for smoke target
...
Conflicts:
t/t6035-merge-dir-to-symlink.sh
* js/maint-reflog-beyond-horizon:
t1503: fix broken test_must_fail calls
rev-parse: tests git rev-parse --verify master@{n}, for various n
sha1_name.c: use warning in preference to fprintf(stderr
rev-parse: exit with non-zero status if ref@{n} is not valid.
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
Commit 0e87c36 (object: call "check_sha1_signature" with the
replacement sha1) changed the first argument passed to
parse_object_buffer() from "sha1" to "repl". With that change,
the returned obj pointer has the replacement SHA1 in obj->sha1,
not the original one.
But when using lookup_commit() and then parse_commit() on a
commit, we get an object pointer with the original sha1, but
the commit content comes from the replacement commit.
So the result we get from using parse_object() is different
from the we get from using lookup_commit() followed by
parse_commit().
It looks much simpler and safer to fix this inconsistency by
passing "sha1" to parse_object_bufer() instead of "repl".
The commit comment should be used to tell the the replacement
commit is replacing another commit and why. So it should be
easy to see that we have a replacement commit instead of an
original one.
And it is not a problem if the content of the commit is not
consistent with the sha1 as cat-file piped to hash-object can
be used to see the difference.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
>Due to this this (and maybe all the tests) need to depend on the
>SYMLINKS prereq.
Here's a third attempt with no use of symlinks in the test:
Skip the entire rename/add conflict case if the file added on the
other branch has the same contents as the file being renamed. This
avoids giving the user an extra copy of the same file and presenting a
conflict that is confusing and pointless.
A simple test of this case has been added in
t/t3030-merge-recursive.sh.
Signed-off-by: Ken Schalk <ken.schalk@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/compat-regex:
Fix compat/regex ANSIfication on MinGW
autoconf: regex library detection typofix
autoconf: don't use platform regex if it lacks REG_STARTEND
t/t7008-grep-binary.sh: un-TODO a test that needs REG_STARTEND
compat/regex: get rid of old-style definition
compat/regex: define out variables only used under RE_ENABLE_I18N
Change regerror() declaration from K&R style to ANSI C (C89)
compat/regex: get the gawk regex engine to compile within git
compat/regex: use the regex engine from gawk for compat
Conflicts:
compat/regex/regex.c
* jn/apply-filename-with-sp:
apply: handle traditional patches with space in filename
tests: exercise "git apply" with weird filenames
apply: split quoted filename handling into new function
* jn/merge-custom-no-trivial:
t7606: Avoid using head as a file name
merge: let custom strategies intervene in trivial merges
t7606 (merge-theirs): modernize style
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
Instead of using `cd dir && (...) && cd..` use `(cd dir && ...)`
This ensures that the test doesn't get caught in the subdirectory if there
is an error in the subshell.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow gitattributes to be set globally and system wide. This way, settings
for particular file types can be set in one place and apply for all user's
repositories.
The location of system-wide attributes file is $(prefix)/etc/gitattributes.
The location of the global file can be configured by setting
core.attributesfile.
Some parts of the code were copied from the implementation of the same
functionality in config.c.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
* en/d-f-conflict-fix:
merge-recursive: Avoid excessive output for and reprocessing of renames
merge-recursive: Fix multiple file rename across D/F conflict
t6031: Add a testcase covering multiple renames across a D/F conflict
merge-recursive: Fix typo
Mark tests that use symlinks as needing SYMLINKS prerequisite
t/t6035-merge-dir-to-symlink.sh: Remove TODO on passing test
fast-import: Improve robustness when D->F changes provided in wrong order
fast-export: Fix output order of D/F changes
merge_recursive: Fix renames across paths below D/F conflicts
merge-recursive: Fix D/F conflicts
Add a rename + D/F conflict testcase
Add additional testcases for D/F conflicts
Conflicts:
merge-recursive.c
* jn/svn-fe:
t/t9010-svn-fe.sh: add an +x bit to this test
t9010 (svn-fe): avoid symlinks in test
t9010 (svn-fe): use Unix-style path in URI
vcs-svn: Avoid %z in format string
vcs-svn: Rename dirent pool to build on Windows
compat: add strtok_r()
treap: style fix
vcs-svn: remove build artifacts on "make clean"
svn-fe manual: Clarify warning about deltas in dump files
Update svn-fe manual
SVN dump parser
Infrastructure to write revisions in fast-export format
Add stream helper library
Add string-specific memory pool
Add treap implementation
Add memory pool library
Introduce vcs-svn lib
* jn/paginate-fix:
t7006 (pager): add missing TTY prerequisites
merge-file: run setup_git_directory_gently() sooner
var: run setup_git_directory_gently() sooner
ls-remote: run setup_git_directory_gently() sooner
index-pack: run setup_git_directory_gently() sooner
config: run setup_git_directory_gently() sooner
bundle: run setup_git_directory_gently() sooner
apply: run setup_git_directory_gently() sooner
grep: run setup_git_directory_gently() sooner
shortlog: run setup_git_directory_gently() sooner
git wrapper: allow setup_git_directory_gently() be called earlier
setup: remember whether repository was found
git wrapper: introduce startup_info struct
Conflicts:
builtin/index-pack.c
* jn/maint-setup-fix:
setup: split off a function to handle ordinary .git directories
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
Conflicts:
builtin/index-pack.c
The same pattern is used in many tests, and makes it easy for new ones to
rely on $HOME being a trashable, clean, directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_create_repo code added in v1.2.2~6 to use a subshell
instead of keeping track of the old working directory and cd-ing back
when it's done.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a test has no prerequisites satisfied (the usual case), instead
of "missing THING of THING", just say "missing THING". This does not
affect the output when a test is skipped due to a missing
prerequisites if another prerequisite is satisfied.
For example: instead of
ok 8 # skip notes work (missing EXPENSIVE of EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
write
ok 8 # skip notes work (missing EXPENSIVE)
ok 9 # skip notes timing with /usr/bin/time (missing EXPENSIVE of USR_BIN_TIME,EXPENSIVE)
Cc: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the passing TODO test in t0000-basic.sh to run inside its own
test-lib.sh. The motivation is to have nothing out of the ordinary on
a normal test run for test smoking purposes.
If every normal test run has a passing TODO you're more likely to turn
a blind eye to it and not to investigate cases where things really are
passing unexpectedly.
It also makes the prove(1) output less noisy. Before:
All tests successful.
Test Summary Report
-------------------
./t0000-basic.sh (Wstat: 0 Tests: 46 Failed: 0)
TODO passed: 5
Files=484, Tests=6229, 143 wallclock secs ( 4.00 usr 4.15 sys + 104.77 cusr 351.57 csys = 464.49 CPU)
Result: PASS
And after:
All tests successful.
Files=484, Tests=6228, 139 wallclock secs ( 4.07 usr 4.25 sys + 104.54 cusr 350.85 csys = 463.71 CPU)
Result: PASS
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests that test the test-lib.sh itself need to be executed in the
dynamically created trash directory, so we can't assume
$TEST_DIRECTORY is ../ for those.
As a side benefit this change also makes it easy for us to move the
t/*.sh tests into subdirectories if we ever want to do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change code that used $TEST_DIRECTORY/.. to use $GIT_BUILD_DIR
instead, the two are equivalent, but the latter is easier to read.
This required moving the assignment od GIT_BUILD_DIR to earlier in the
test-lib.sh file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the redundant calls to $(pwd) to use $TEST_DIRECTORY
instead. None of these were being executed after we cd'd somewhere
else so they weren't actually needed.
This also makes it easier to add support for overriding the test
library location and run tests in a different directory than t/.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new variable $GIT_BUILD_DIR which can be used to locate
data that resides under the build directory, and use that instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect and report hard-to-notice spelling mistakes like
test_might_fail "git config --unset whatever"
(the extra quotes prevent the shell from running git as intended;
instead, the shell looks for a "git config --unset whatever" file).
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let test_might_fail say something about its failures for consistency
with test_must_fail.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend remove_note() in the notes API to return whether or not a note was
actually removed. Use this in 'git notes remove' to skip the creation of
a notes commit when no notes were actually removed.
Also add a test illustrating the change in behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of it is to run a command that produces failure. A
missing command is more likely an error in the test script
(e.g., using 'test_must_fail "command with arguments"', or
relying on a missing command).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because test_must_fail fails when a command succeeds, the
command frequently does not produce any output (since, after
all, it thought it was succeeding). So let's have
test_must_fail itself report that a problem occurred.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in detached-stash are calling test_must_fail
in such a way that the arguments to test_must_fail do, indeed, fail
but not in the manner expected by the test.
This patch removes the unnecessary and unhelpful double quotes.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in maint-reflog-beyond-horizon are calling test_must_fail
in such a way that the arguments to test_must_fail do, indeed, fail
but not in the manner expected by the test.
This patch removes the unnecessary and unhelpful double quotes.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git status" and the diff family the submodule.*.ignore settings from
.git/config and .gitmodules can be used to override the default set via
diff.ignoreSubmodules on a per-submodule basis. Let's do this consistently
and teach checkout to use these settings too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, document that checkout uses this flag too in the Documentation.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the topmost three commits in a branch were merge commits, 'git
format-patch -3' used to output nothing. Since Git can't prepare
patches out of merge commits anyway, don't go over them in the first
place. 'git format-patch -3' now prepares three patches from the
topmost three commits without counting merge commits. Also add a
corresponding test in t4014-format-patch and update documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call test_tick before attempting to commit in the setup routine to
preserve the order of the commits.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We can be clever and know by ourselves when we need the behavior
implied by "--remap-to-ancestor". No need to encumber users by having
them exposed to it as a tunable. (Option kept for backward compatibility,
but it's now a no-op.)
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bundle command silently died with no sign of failure if it
could not create the bundle file. (Eg.: its path resovles to a directory,
or the parent dir is sticky while file already exists and is owned
by someone else.)
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for merging with ignoring line endings (specifically
--ignore-space-at-eol) when using recursive merging. This is
as a strategy-option, so that you can do:
git merge --strategy-option=ignore-space-at-eol <branch>
and
git rebase --strategy-option=ignore-space-at-eol <branch>
This can be useful for coping with line-ending damage (Xcode 3.1 has a
nasty habit of converting all CRLFs to LFs, and VC6 tends to just use
CRLFs for inserted lines).
The only option I need is ignore-space-at-eol, but while at it,
include the other xdiff whitespace options (ignore-space-change,
ignore-all-space), too.
[jn: with documentation]
Signed-off-by: Justin Frankel <justin@cockos.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git fetch' is supplied a single argument, it tries to match it
against a configured remote and then fetch the refs specified by the
named remote's fetchspec. Additionally, or alternatively, if the current
branch has a merge ref configured, and if the name of the remote supplied
to fetch matches the one in the branch's configuration, then git also adds
the merge ref to the list of refs to update.
If the argument to fetch does not specify a named remote, or if the name
supplied does not match the remote configured for the current branch, then
the current branch's merge configuration should not be considered.
git currently mishandles the case when the argument to fetch specifies a
GIT URL(i.e. not a named remote) and the current branch has a configured
merge ref. In this case, fetch should ignore the branch's merge ref and
attempt to fetch from the remote repository's HEAD branch. But, since
fetch only checks _whether_ the current branch has a merge ref configured,
and does _not_ check whether the branch's configured remote matches the
command line argument (until later), it will mistakenly enter the wrong
branch of an 'if' statement and will not fall back to fetch the HEAD branch.
The fetch ends up doing nothing and returns with a successful zero status.
Fix this by comparing the remote repository's name to the branch's remote
name, in addition to whether it has a configured merge ref, sooner, so that
fetch can correctly decide whether the branch's configuration is interesting
or not, and fall back to fetching from the remote's HEAD branch when
appropriate.
This fixes the test in t5510.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git fetch' is supplied just a repository URL (not a remote name),
and without a fetch refspec, it should fetch from the remote HEAD branch
and update FETCH_HEAD with the fetched ref. Currently, when 'git fetch'
is called like this, it fails to retrieve anything, and does not update
FETCH_HEAD, if the current checked-out branch has a configured merge ref.
i.e. this fetch fails to retrieve anything nor update FETCH_HEAD:
git checkout master
git config branch.master.merge refs/heads/master
git fetch git://git.kernel.org/pub/scm/git/git.git
but this one does:
git config --unset branch.master.merge
git fetch git://git.kernel.org/pub/scm/git/git.git
Add a test to demonstrate this flaw.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running git-merge on an unborn branch is supposed to do an index-level
merge with the other side, and then update the branch name there. In
the common case where the index was empty at the start, this makes
'git pull otherrepo branch' a convenient way to populate the history
after 'git init'.
However, if the index was *not* empty, git-merge silently discards
*both index and worktree* copies of all files that were tracked,
leading to data loss. Exhibit this bug.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces tests that verify that rev-parse
parses master@{n} correctly for various values of n less
than, equal to and greater than the number of revisions
in the reference log.
In particular, these tests check that rev-parse exits with a
non-zero status code and prints a message of the
following form to stderr.
fatal: Log for [^ ]* only has [0-9][0-9]* entries.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The time_notes script, which uses POSIX shell features, is
currently sometimes run with a non-POSIX /bin/sh.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A file named 'head' gets confused with the HEAD ref on
case-insensitive file systems. Replace '>head' with '>head.new' to
match the '>head.old' files they are compared to.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like $GIT_CONFIG, $GIT_CONFIG_PARAMETERS needs to be suppressed by
"git push" and its cousins when running local transport helpers to
imitate remote transport well.
Noticed-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using `cd dir && (...) && cd..` use `(cd dir && ...)`
This ensures that the test doesn't get caught in the subdirectory if
there is an error in the subshell.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds new tests which check that:
* git stash branch handles a stash-like argument when there is a stash stack
* git stash branch handles a stash-like argument when there is not a stash stack
* git stash show handles a stash-like argument when there is a stash stack
* git stash show handles a stash-like argument when there is not a stash stack
* git stash drop fails early if the specified argument is not a stash reference
* git stash pop fails early if the specified argument is not a stash reference
* git stash * fails early if the reference supplied is bogus
* git stash fails early with stash@{n} where n >= length of stash log
Helped-by: Johannes Sixt
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
* nd/fix-sparse-checkout:
unpack-trees: mark new entries skip-worktree appropriately
unpack-trees: do not check for conflict entries too early
unpack-trees: let read-tree -u remove index entries outside sparse area
unpack-trees: only clear CE_UPDATE|CE_REMOVE when skip-worktree is always set
t1011 (sparse checkout): style nitpicks
* hv/submodule-find-ff-merge:
Implement automatic fast-forward merge for submodules
setup_revisions(): Allow walking history in a submodule
Teach ref iteration module about submodules
Conflicts:
submodule.c
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
To discover filenames from the --- and +++ lines in a traditional
unified diff, currently "git apply" scans forward for a whitespace
character on each line and stops there. It can't use the whole line
because "diff -u" likes to include timestamps, like so:
--- foo 2000-07-12 16:56:50.020000414 -0500
+++ bar 2010-07-12 16:56:50.020000414 -0500
The whitespace-seeking heuristic works great, even when the tab
has been converted to spaces by some email + copy-and-paste
related corruption.
Except for one problem: if the filename itself contains whitespace,
the inferred filename will be too short.
When Giuseppe ran into this problem, it was for a file creation
patch (for debian/licenses/LICENSE.global BSD-style Chromium).
So one can't use the list of files present in the index to deduce an
appropriate filename (not to mention that way lies madness; see
v0.99~402, 2005-05-31).
Instead, look for a timestamp and use that if present to mark the end
of the filename. If no timestamp is present, the old heuristic is
used, with one exception: the space character \040 is not considered
terminating whitespace any more unless it is followed by a timestamp.
Reported-by: Giuseppe Iuculano <iuculano@debian.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that "git apply" can cope with strange filenames, particularly
filenames with spaces.
Not all platforms have a sane enough diff -u and expand to
reliably create the such patches and maybe future versions of GNU
diff will handle funny characters differently, so this uses
pre-generated patches. The script used to generate them is in
t/t4135/make-patches.
Filenames with tabs are not usable on NTFS; use something like the
FUNNYNAMES prerequisite from v1.3.0-rc1~67 (2006-03-03) to skip the
relevant tests when appropriate. The detection is not shared in
test-lib.sh to avoid wasting time while running other test scripts.
Backslash is the path separator on Windows, so do not used it in
file names there (v1.6.3-rc0~93^2~6, 2009-03-13).
Finally, filenames starting with a quotation mark do not behave well
in msys (see v1.7.0-rc0~94^2, t4030, t4031: work around bogus MSYS
bash path conversion, 2010-01-01), so skip those tests on Windows,
too.
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new find_name_gnu() function handles new-style '--- "a/foo"'
patch header lines, leaving find_name() itself a bit less
daunting.
Functional change: do not clobber the p-value when there are not
enough path components in a quoted file name to honor it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
Now that we have a regex engine that supports REG_STARTEND this test
should fail if "git grep" can't grep NULL characters.
Platforms that don't have a POSIX regex engine which supports
REG_STARTEND should always define NO_REGEX=YesPlease when compiling.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--parents" option did not appear until SVN 1.5.x
and is completely unnecessary in this case.
Reported-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Since v1.7.1.1~23^2 (merge: --log appends shortlog to message if
specified, 2010-05-11), the fmt-merge-msg backend supports custom text
to override the merge title "Merge <foo> into <bar>".
Expose this functionality for scripted callers. Example:
git fmt-merge-msg --log -m \
"$(printf '%s\n' \
"Merge branch 'api-cleanup' into feature" \
'' \
'This is to use a few functions refactored for this purpose.'
)" <.git/FETCH_HEAD
Cc: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --independent does not support more than MAX_REVS
revs, git internally supports more with a different algorithm.
Expose that functionality as "git merge-base --independent".
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --merge-base does not support more than MAX_REVS
revs, git supports more with a different algorithm
(v1.6.0-rc0~51^2~13, Introduce get_octopus_merge_bases() in commit.c,
2008-06-27). Expose that functionality.
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup with test_expect_success. Use test_might_fail
instead of ignoring the exit code from git config --unset.
Point out setup commands that are shared by multiple tests,
to make it easy to write GIT_SKIP_TESTS specifications that
work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup with test_expect_success, put the opening quote
starting each test on the same line as the test_expect_* invocation,
and combine related actions into single tests.
While at it:
- use test_cmp instead of expr or test $foo = $bar, for more helpful
output with -v when tests fail;
- use test_commit for brevity.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people like to "git fetch origin && merge origin/master" from
the unborn branch provided when first initializing a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The details of the reflog message are not important, but
including something sane in the reflog is.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Probably as a development aid, this test script runs gitk --all
to allow the driver to inspect history between tests when run
with --debug. As a result, running all tests with --debug
requires closing a long series of gitk displays, one at a time.
Use git log --graph --oneline instead. This way, the history is
available for viewing with "git show" but the test script finishes
without interaction.
Longer term, it would be nice to have an option to run a
user-specified command between tests. This patch does not do
that.
Cc: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup commands with test_expect_success, so they are easier
to visually skip over and get to the good part. While at it:
- use "printf '%s\n' a b ..." instead of "cat <<EOF" for test
vectors with short lines;
- use test_cmp instead of test foo = bar where possible, for
better output with -v on failure;
- do not go to extraordinary lengths to print a relevant message
when test commands fail. There is a patch in flight that could be
used to restore the nice error messages in a cleaner way.
Cc: Lars Hjemli <hjemli@gmail.com>
Cc: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no branch 'foo' exists but a tag 'foo' does, then
git merge foo^ results in
Merge branch 'foo' (early part)
as a commit message, because the relevant code path checks that
refs/heads/foo is a valid refname for writing rather than for
reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule sync" synchronizes the repository URLs
it only updates submodules' .git/config. However, the old
URLs still exist in the super-project's .git/config.
Update the super-project's configuration so that commands
such as "git submodule update" use the URLs from .gitmodules.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test introduced in the "Use advise() for hints" patch by
Jonathan Nieder not to use '' for quotes inside '' delimited code. It
ended up introducing a file called <paths> to the main git repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
* cc/find-commit-subject:
blame: use find_commit_subject() instead of custom code
merge-recursive: use find_commit_subject() instead of custom code
bisect: use find_commit_subject() instead of custom code
revert: rename variables related to subject in get_message()
revert: refactor code to find commit subject in find_commit_subject()
revert: fix off by one read when searching the end of a commit subject
Some tests in t96xx series (cvsimport) want to write into the control area
(CVSROOT) of their test CVS repositories, but this does not work well when
the source area is made read-only (test trash directories are moved via
--root=else/where option).
Copy the supplied test CVS repository to a scratch place at the beginning
of these tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to declare a PERL prerequisite. These tests use the
-p switch, so they implicitly depend on Perl code, but nothing was
declaring this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to declare a PERL prerequisite. These tests use the
-p switch, so they implicitly depend on Perl code, but nothing was
declaring this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to declare a PERL prerequisite. These tests use the
-p switch, so they implicitly depend on Perl code, but nothing was
declaring this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the setup code in t/t9001-send-email.sh to use
test_expect_success. This way it isn't needlessly run in environments
where the test prerequisites aren't met.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the PROG=* assignment from t9001-send-email.sh. It's been there
since v1.4.0-rc1~30 when the test was originally added, but only tests
that source annotate-tests.sh need it, it was seemingly introduced to
this test via copy/paste coding.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the five tests that were all checking "git config --bool
core.filemode" to use a new FILEMODE prerequisite in
lib-prereq-FILEMODE.sh.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the smoke target to create a test-results directory. This was
done implicitly by the test-lib before my "test-lib: Don't write
test-results when HARNESS_ACTIVE" patch, but after that smoking from
the pu branch hasn't worked.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-notes expensive timing test is only expensive because it
either did 10,100,1k and 10k iterations or nothing.
Change it to do 10 by default, with an option to run the expensive
version with the old GIT_NOTES_TIMING_TESTS=ZomgYesPlease variable.
Since nobody was ostensibly running this test under TAP the code had
bitrotted so that it emitted invalid TAP. This change fixes that.
The old version would also mysteriously fail on systems without
/usr/bin/time, there's now a check for that using the multiple test
prerequisite facility.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change this test to skip test with test prerequisites, and to do setup
work in tests. This improves the skipped statistics on platforms where
the test isn't run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example I initially added to "Skipping tests" wasn't very
good. We'd rather skip tests using the three-arg prereq form to the
test_* functions, not bail out with a skip message.
Change the documentation to reflect that, but retain the bailout
example under a disclaimer which explains that it's probably not a
good idea to use it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change t/t7800-difftool.sh to to skip with the the three-arg prereq
form of test_expect_success instead of bailing out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the t/t5800-remote-helpers.sh test to skip with the the
three-arg prereq form of test_expect_success instead of bailing out.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tests that skipped due to unavailable SYMLINKS support to
use the three-arg prereq form of test_expect_success.
This is like the "tests: implicitly skip SYMLINKS tests using
<prereq>" change, but I needed to create an additional test for some
setup code. It's in a separate change as suggested by Jonathan Nieder
for ease of reviewing.
Date: Tue, 27 Jul 2010 16:17:37 -0500
From: Jonathan Nieder <jrnieder@gmail.com>
Message-ID: <20100727211737.GA11768@burratino>
In-Reply-To: <1280265254-19642-2-git-send-email-avarab@gmail.com>
Subject: Re: [PATCH 1/4] tests: implicitly skip SYMLINKS tests using <prereq>
Ævar Arnfjörð Bjarmason wrote:
> +++ b/t/t4004-diff-rename-symlink.sh
> @@ -40,8 +34,9 @@ test_expect_success \
> # rezrov and nitfol are rename/copy of frotz and bozbar should be
> # a new creation.
>
> -GIT_DIFF_OPTS=--unified=0 git diff-index -M -p $tree >current
> -cat >expected <<\EOF
> +test_expect_success SYMLINKS 'setup diff output' "
> + GIT_DIFF_OPTS=--unified=0 git diff-index -M -p $tree >current
> + cat >expected <<\EOF
> diff --git a/bozbar b/bozbar
> new file mode 120000
> --- /dev/null
Probably belongs in a separate patch. More importantly, it is missing
&&-chaining (not a regression, but it is best to set a good example).
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the tests that skipped due to unavailable SYMLINKS support to
use the three-arg prereq form of test_expect_success.
Now we get an indication of how many tests that need symlinks are
being skipped on platforms that don't support them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having no coverage at all is almost always a bad sign, but trying to
attain 100% coverage everywhere is usually a waste of time. Add a
paragraph to explain this to future test writers.
Inspired-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how test writers can generate coverage reports, to ensure
that their tests are really testing the code they think they're
testing.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The smoke server supports a free form text field with comments about a
report, and a comma delimited list of tags. Change the smoke_report
target to expose this functionality. Now smokers can send more data
that explains and categorizes the reports they're submitting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the smoke testing portion of t/Makefile not to include
GIT-BUILD-OPTIONS. It's a shellscript, not a Makefile snippet, so it
had the nasty side-effect of sneaking e.g. SHELL_PATH = '/bin/sh'
(with quotes) everywhere.
Just add our own PERL_PATH variable as a workaround. The t/Makefile
already has e.g. an equivalent SHELL_PATH and TAR option which
duplicate the definitions in GIT-BUILD-OPTIONS.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git now has a smoke testing service at http://smoke.git.nix.is that
anyone can send reports to. Change the t/README file to mention this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the capability to send smoke reports from the Git test suite.
Currently we only notice bugs in the test suite when it's run
manually. Bugs in Git that only occur on obscure platforms or setups
that the core developers aren't using can thus go unnoticed.
This series aims to change that. With it, anyone that's interested in
avoiding bitrot in Git can volunteer to run a smoke tester. A smoke
tester periodically compiles the latest version of Git, runs the test
suite, and submits a report to a central server indicating how the
test run went.
A smoke tester might run something like this in cron:
#!/bin/sh
cd ~/g/git
git fetch
for branch in maint master next pu; do
git checkout origin/$i &&
make clean all &&
cd t &&
make smoke_report
done
The smoker might want to compile git with non-default flags, include
bisecting functionality or run the tests under valgrind. Doing that is
outside the scope of this patch, this just adds a report submission
mechanism. But including a canonical smoke runner is something we'll
want to include eventually.
What this does now is add smoke and smoke_report targets to t/Makefile
(this example only uses a few tests for demonstration):
$ make clean smoke
rm -f -r 'trash directory'.* test-results
rm -f t????/cvsroot/CVSROOT/?*
rm -f -r valgrind/bin
rm -f .prove
perl ./harness --git-version="1.7.2.1.173.gc9b40" \
--no-verbose \
--archive="test-results/git-smoke.tar.gz" \
t0000-basic.sh t0001-init.sh t0002-gitfile.sh t0003-attributes.sh t0004-unwritable.sh t0005-signals.sh t0006-date.sh
t0000-basic.sh ....... ok
t0001-init.sh ........ ok
t0002-gitfile.sh ..... ok
t0003-attributes.sh .. ok
t0004-unwritable.sh .. ok
t0005-signals.sh ..... ok
t0006-date.sh ........ ok
All tests successful.
Test Summary Report
-------------------
t0000-basic.sh (Wstat: 0 Tests: 46 Failed: 0)
TODO passed: 5
Files=7, Tests=134, 3 wallclock secs ( 0.06 usr 0.05 sys + 0.23 cusr 1.33 csys = 1.67 CPU)
Result: PASS
TAP Archive created at /home/avar/g/git/t/test-results/git-smoke.tar.gz
The smoke target uses TAP::Harness::Archive to aggregate the test
results into a tarball. The tarball contains two things, the output of
every test file that was run, and a metadata file:
Tarball contents:
$ tar xzvf git-smoke.tar.gz
t0004-unwritable.sh
t0001-init.sh
t0002-gitfile.sh
t0005-signals.sh
t0000-basic.sh
t0003-attributes.sh
t0006-date.sh
meta.yml
A test report:
$ cat t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
A metadata file:
---
extra_properties:
file_attributes:
-
description: t0000-basic.sh
end_time: 1280437324.61398
start_time: 1280437324.22186
-
description: t0001-init.sh
end_time: 1280437325.12346
start_time: 1280437324.62393
-
description: t0002-gitfile.sh
end_time: 1280437325.29428
start_time: 1280437325.13646
-
description: t0003-attributes.sh
end_time: 1280437325.59678
start_time: 1280437325.30565
-
description: t0004-unwritable.sh
end_time: 1280437325.77376
start_time: 1280437325.61003
-
description: t0005-signals.sh
end_time: 1280437325.85426
start_time: 1280437325.78727
-
description: t0006-date.sh
end_time: 1280437326.2362
start_time: 1280437325.86768
file_order:
- t0000-basic.sh
- t0001-init.sh
- t0002-gitfile.sh
- t0003-attributes.sh
- t0004-unwritable.sh
- t0005-signals.sh
- t0006-date.sh
start_time: 1280437324
stop_time: 1280437326
The "extra_properties" hash is where we'll stick Git-specific info,
like whether Git was compiled with gettext or the fallback regex
engine, and what branch we're compiling. Currently no metadata like
this is included.
The entire tarball is then submitted to a central smokebox at
smoke.git.nix.is. This is done with curl(1) via the "smoke_report"
target:
$ make smoke_report
curl \
-H "Expect: " \
-F project=Git \
-F architecture=x86_64 \
-F platform=Linux \
-F revision="1.7.2.1.173.gc9b40" \
-F report_file=@test-results/git-smoke.tar.gz \
http://smoke.git.nix.is/app/projects/process_add_report/1 \
| grep -v ^Redirecting
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 117k 100 63 100 117k 3 6430 0:00:21 0:00:18 0:00:03 0
Reported #8 added.
Reports are then made available on the smokebox via a web interface:
http://smoke.git.nix.is/app/projects/smoke_reports/1
The smoke reports are also mirrored to a Git repository hosted on
GitHub:
http://github.com/gitsmoke/smoke-reports
The Smolder SQLite database that contains metadata about the reports
is also made available:
http://github.com/gitsmoke/smoke-database
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The support for multiple test prerequisites added by me in "test-lib:
Add support for multiple test prerequisites" was broken.
The for iterated over each prerequisite and returned true/false within
a case statement, but since it missed a return statement only the last
prerequisite in the list of prerequisites was ever considered, the
rest were ignored.
Fix that by changing the test_have_prereq code to something less
clever that keeps a count of the total prereqs and the ones we have
and compares the count at the end.
This comes with the added advantage that it's easy to list the missing
prerequisites in the test output, implement that while I'm at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests depend on not being able to write to files after chmod
-w. This doesn't work when running the tests as root.
Change test-lib.sh to test if this works, and if so it sets a new
SANITY test prerequisite. The tests that use this previously failed
when run under root.
There was already a test for this in t3600-rm.sh, added by Junio C
Hamano in 2283645 in 2006. That check now uses the new SANITY
prerequisite.
Some of this was resurrected from the "Tests in Cygwin" thread in May
2009:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The README for the test library suggested that you grep the
test-lib.sh for test_set_prereq to see what the preset prerequisites
were.
Remove that bit, and write a section explaining all the preset
prerequisites. Most of the text was lifted from from Junio C Hamano
and Johannes Sixt, See the "Tests in Cygwin" thread in May 2009 for
the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test output to print needed prerequisites as part of the
TAP. This makes it easy to see at a glance why a test was
skipped. Before:
ok 7 # skip <message>
ok 9 # skip <message>
After:
ok 7 # skip <message> (prereqs: DONTHAVEIT)
ok 9 # skip <message> (prereqs: HAVEIT,DONTHAVEIT)
This'll also be useful for smoke testing output, where the developer
reading the output may not be familiar with the system where tests are
being skipped.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the test_have_prereq function in test-lib.sh to support a
comma-separated list of prerequisites. This is useful for tests that
need e.g. both POSIXPERM and SANITY.
The implementation was stolen from Junio C Hamano and Johannes Sixt,
the tests and documentation were not. See the "Tests in Cygwin" thread
in May 2009 for the originals:
http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP harnesses don't need to read test-results/*, since they keep track
of the number of passing/failing tests internally. Skip the generation
of these files when HARNESS_ACTIVE is set.
It's now possible to run the Git test suite without writing anything
to the t/ directory at all if you use a TAP harness and the --root
switch:
cd t
sudo mount -t tmpfs none /tmp/memory -o size=300m
prove -j9 ./t[0-9]*.sh :: --root=/tmp/memory
The I/O that the ~500 test-results/* files contributed was very
minimal, but I thought this was worth mentioning.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
In 5a2580d (merge_recursive: Fix renames across paths below D/F conflicts
2010-07-09), detection was added for renames across paths involved in a
directory<->file conflict. However, the change accidentally involved
reusing an outer loop index ('i') in an inner loop, changing its values
and causing a slightly different type of breakage for cases where there are
multiple renames across the D/F conflict. Fix by creating a new temporary
variable 'i'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tc/checkout-B:
builtin/checkout: handle -B from detached HEAD correctly
builtin/checkout: learn -B
builtin/checkout: reword hint for -b
add tests for checkout -b
When mergetool is run without path limiters it loops
over each entry in 'git ls-files -u'. This includes
autoresolved paths.
Teach mergetool to only merge files listed in 'rerere status'
when rerere is enabled.
There are some subtle but harmless changes in behavior.
We now call cd_to_toplevel when no paths are given.
We do this because 'rerere status' paths are always relative
to the root. This is beneficial for the non-rerere use as
well in that mergetool now runs against all unmerged files
regardless of the current directory.
This also slightly tweaks the output when run without paths
to be more readable.
The old output:
Merging the files: foo
bar
baz
The new output:
Merging:
foo
bar
baz
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add userdiff patterns for C#. This code is an improved version of
code by Adam Petaccia from 21 June 2009 mail to the list.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git bundle unbundle" and "git config" pagination tests are not
supposed to run when stdout is not a terminal and IO::Pty not available
to make one on the fly.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.6.1-rc1~294^2 (2008-08-23) explains, custom merge strategies
do not even kick in when the merge is truly trivial. But they
should, since otherwise a custom “--strategy=theirs” is not useful.
Perhaps custom strategies should not allow fast-forward either. This
patch does not make that change, since it is less important (because
it is always possible to explicitly use --no-ff).
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Guard setup commands with test_expect_success, so they are easier
to visually skip over and get to the good part. While at it:
- use test_commit for brevity and reproducible object names;
- use test_cmp instead of using the test builtin to compare the
result of command substitution, for better output with -v on
failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/maint-setup-fix' (early part):
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
For the pager choice (and the choice to paginate) to reflect the
current repository configuration, the repository needs to be
located first.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, “git -p bundle” does not always
respect the repository-local “[core] pager” setting.
It is hard to notice because subcommands other than
“git bundle unbundle” do not produce much output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.2~16^2 (2010-07-14) explains, without this change,
“git --paginate apply” can ignore the repository-local
“[core] pager” configuration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a regression test for the git log -M --follow $diff_option bug
introduced in v1.7.2-rc0~103^2~2, $diff_option being diff related
options like -p, --stat, --name-only etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Prefix the advice
with “hint: ” to help.
Before:
error: could not apply 7ab78c9... foo
After resolving the conflicts,
mark the corrected paths with 'git add <paths>' or 'git rm <paths>'
and commit the result with:
git commit -c 7ab78c9a7898b87127365478431289cb98f8d98f
After:
error: could not apply 7ab78c9... foo
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit -c 7ab78c9'
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick was written (v0.99.6~63, 2005-08-27), “git commit”
was quiet, and the output from cherry-pick provided useful information
about the progress of a rebase.
Now next to the output from “git commit”, the cherry-pick notification
is so much noise (except for the name of the picked commit).
$ git cherry-pick ..topic
Finished cherry-pick of 499088b.
[detached HEAD 17e1ff2] Move glob module to libdpkg
Author: Guillem Jover <guillem@debian.org>
8 files changed, 12 insertions(+), 9 deletions(-)
rename {src => lib/dpkg}/glob.c (98%)
rename {src => lib/dpkg}/glob.h (93%)
Finished cherry-pick of ae947e1.
[detached HEAD 058caa3] libdpkg: Add missing symbols to Versions script
Author: Guillem Jover <guillem@debian.org>
1 files changed, 2 insertions(+), 0 deletions(-)
$
The noise is especially troublesome when sifting through the output of
a rebase or multiple cherry-pick that eventually failed.
With the commit subject, it is already not hard to figure out where
the commit came from. So drop the “Finished” message.
Cc: Christian Couder <chriscool@tuxfamily.org>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-svn assumes that two tags created from the same
revision will have the same repo url, so it uses a ref to the
tag without checking that its url matches the current url.
This causes issues when fetching an svn repo where a tag was
created, deleted, and then recreated under the following
circumstances:
- Both tags were copied from the same revision.
- Both tags had the same name.
- Both tags had different repository paths.
- [Optional] Both tags have a file with the same name but
different content.
When all four conditions are met, a checksum mismatch error
occurs because the content of two files with the same path
differs (see t/t9155--git-svn-fetch-deleted-tag.sh):
Checksum mismatch: ChangeLog 065854....
expected: ce771b....
got: 9563fd....
When only the first three conditions are met, no error occurs
but the tag in git matches the first (deleted) tag instead of
the last (most recent) tag (see
t/t9156-git-svn-fetch-deleted-tag-2.sh).
The fix is to verify that the repo url for the ref matches the
current url. If the urls do not match, then a "tail" is grown
on the tag name by appending a dash and rechecking the new ref's
repo url until either a matching repo url is found or a new tag
is created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The svn-fe test fails on Windows in the “svn export” step because of
the lack of symlink support. With a less ambitious dump, it passes.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since v1.6.3-rc0~101^2~14 (Tests on Windows: $(pwd) must return
Windows-style paths, 2009-03-13), there is a subtle difference between
$(pwd) and $PWD in tests: the former returns Windows-style paths as
might be output by git and the latter Unix-style paths which msys
programs tend to prefer.
In file:// URIs, Unix-style paths are needed. Before: “svn export”
declares it cannot find
file://c:/apps/git/git/t/trash directory/simple-svco
After: “svn export” successfully finds
file:///c/apps/git/git/...
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
svndump parses data that is in SVN dumpfile format produced by
`svnadmin dump` with the help of line_buffer and uses repo_tree and
fast_export to emit a git fast-import stream.
Based roughly on com.hydrografix.svndump 0.92 from the SvnToCCase
project at <http://svn2cc.sarovar.org/>, by Stefan Hegny and
others.
[rr: allow input from files other than stdin]
[jn: with test, more error reporting]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This library provides thread-unsafe fgets()- and fread()-like
functions where the caller does not have to supply a buffer. It
maintains a couple of static buffers and provides an API to use
them.
[rr: allow input from files other than stdin]
[jn: with tests, documentation, and error handling improvements]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Intern strings so they can be compared by address and stored without
wasting space.
This library uses the macros in the obj_pool.h and trp.h to create a
memory pool for strings and expose an API for handling them.
[rr: added API docs]
[jn: with some API simplifications, new documentation and tests]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide macros to generate a type-specific treap implementation and
various functions to operate on it. It uses obj_pool.h to store memory
nodes in a treap. Previously committed nodes are never removed from
the pool; after any *_commit operation, it is assumed (correctly, in
the case of svn-fast-export) that someone else must care about them.
Treaps provide a memory-efficient binary search tree structure.
Insertion/deletion/search are about as about as fast in the average
case as red-black trees and the chances of worst-case behavior are
vanishingly small, thanks to (pseudo-)randomness. The bad worst-case
behavior is a small price to pay, given that treaps are much simpler
to implement.
>From http://www.canonware.com/download/trp/trp_hash/trp.h
[db: Altered to reference nodes by offset from a common base pointer]
[db: Bob Jenkins' hashing implementation dropped for Knuth's]
[db: Methods unnecessary for search and insert dropped]
[rr: Squelched compiler warnings]
[db: Added support for immutable treap nodes]
[jn: Reintroduced treap_nsearch(); with tests]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a memory pool library implemented using C macros. The
obj_pool_gen() macro creates a type-specific memory pool.
The memory pool library is distinguished from the existing specialized
allocators in alloc.c by using a contiguous block for all allocations.
This means that on one hand, long-lived pointers have to be written as
offsets, since the base address changes as the pool grows, but on the
other hand, the entire pool can be easily written to the file system.
This could allow the memory pool to persist between runs of an
application.
For the svn importer, such a facility is useful because each svn
revision can copy trees and files from any previous revision. The
relevant information for all revisions has to persist somehow to
support incremental runs.
[rr: minor cleanups]
[jn: added tests; removed file system backing for now]
Signed-off-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, if remote.<name>.tagopt was set, the --tags and option would
have no effect when given to git fetch. So if
tagopt="--no-tags"
git fetch --tags
would not actually fetch tags.
This patch changes this behavior to only follow what is written in the
config if there is no option passed by the command line.
Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), pull --rebase would run
git rebase $merge_head
which resulted in a call to
git format-patch ... --ignore-if-in-upstream $merge_head..$cur_branch
This resulted in patches from $merge_head..$cur_branch being applied, as
long as they did not already exist in $cur_branch..$merge_head.
Unfortunately, when upstream is rebased, $merge_head..$cur_branch also
refers to "old" commits that have already been rebased upstream, meaning
that many patches that were already fixed upstream would be reapplied.
This could result in many spurious conflicts, as well as reintroduce
patches that were intentionally dropped upstream.
So the algorithm was changed in c85c792 (pull --rebase: be cleverer with
rebased upstream branches, 2008-01-26) and d44e712 (pull: support rebased
upstream + fetch + pull --rebase, 2009-07-19). Defining $old_remote_ref to
be the most recent entry in the reflog for @{upstream} that is an ancestor
of $cur_branch, pull --rebase was changed to run
git rebase --onto $merge_head $old_remote_ref
which results in a call to
git format-patch ... --ignore-if-in-upstream $old_remote_ref..$cur_branch
The whole point of this change was to reduce the number of commits being
reapplied, by avoiding commits that upstream already has or had.
In the rebased upstream case, this change achieved that purpose. It is
worth noting, though, that since $old_remote_ref is always an ancestor of
$cur_branch (by its definition), format-patch will not know what upstream
is and thus will not be able to determine if any patches are already
upstream; they will all be reapplied.
In the non-rebased upstream case, this new form is usually the same as the
original code but in some cases $old_remote_ref can be an ancestor of
$(git merge-base $merge_head $cur_branch)
meaning that instead of avoiding reapplying commits that upstream already
has, it actually includes more such commits. Combined with the fact that
format-patch can no longer detect commits that are already upstream (since
it is no longer told what upstream is), results in lots of confusion for
users (e.g. "git is giving me lots of conflicts in stuff I didn't even
change since my last push.")
Cases where additional commits could be reapplied include forking from a
commit other than the tracking branch, or amending/rebasing after pushing.
Cases where the inability to detect upstreamed commits cause problems
include independent discovery of a fix and having your patches get
upstreamed by some alternative route (e.g. pulling your changes to a third
machine, pushing from there, and then going back to your original machine
and trying to pull --rebase).
Fix the non-rebased upstream case by ignoring $old_remote_ref whenever it
is contained in $(git merge-base $merge_head $cur_branch). This should
have no affect on the rebased upstream case.
Acked-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
push: mention "git pull" in error message for non-fast forwards
Standardize do { ... } while (0) style
t/t7003: replace \t with literal tab in sed expression
index-pack: Don't follow replace refs.
The sed utilities on IRIX and Solaris do not interpret the sequence '\t'
to mean a tab character; they read a literal character 't'. So, use a
literal tab instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, attempting to index a pack containing objects that have been
replaced results in a fatal error that looks like:
fatal: SHA1 COLLISION FOUND WITH <replaced-object> !
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: remove spurious commas in email subject
fast-import: export correctly marks larger than 2^20-1
t/lib-git-svn.sh: use $PERL_PATH for perl, not perl from $PATH
diff: strip extra "/" when stripping prefix
dump_marks_helper() has a bug when dumping marks larger than 2^20-1,
i.e., when the sparse array has more than two levels. The bug was
that the 'base' counter was being shifted by 20 bits at level 3, and
then again by 10 bits at level 2, rather than a total shift of 20 bits
in this argument to the recursive call:
(base + k) << m->shift
There are two ways to fix this correctly, the elegant:
(base + k) << 10
and the one I chose due to edit distance:
base + (k << m->shift)
Signed-off-by: Raja R Harinath <harinath@hurrynot.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the git-svn tests to use $PERL_PATH, not the "perl" in $PATH.
Using perl in $PATH was added by Sam Vilain in v1.6.6-rc0~95^2~3,
Philippe Bruhat introduced $PERL_PATH to the test suite in
v1.6.6-rc0~9^2, but the lib-git-svn.sh tests weren't updated to use
the new convention.
This resulted in the git-svn tests always being skipped on my
system. My /usr/bin/perl has access to SVN::Core and SVN::Repos, but
the perl in my $PATH does not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
