6df42ab (Add global and system-wide gitattributes, 2010-09-01) forgot
to quote one instance of $HOME in the tests. This would be valid
according to POSIX, but bash 4 helpfully declines to execute the
command in question with an "ambiguous redirection" error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/send-email-perl:
send-email: extract_valid_address use qr// regexes
send-email: is_rfc2047_quoted use qr// regexes
send-email: use Perl idioms in while loop
send-email: make_message_id use "require" instead of "use"
send-email: send_message die on $!, not $?
send-email: use (?:) instead of () if no match variables are needed
send-email: sanitize_address use qq["foo"], not "\"foo\""
send-email: sanitize_address use $foo, not "$foo"
send-email: use \E***\Q instead of \*\*\*
send-email: cleanup_compose_files doesn't need a prototype
send-email: unique_email_list doesn't need a prototype
send-email: file_declares_8bit_cte doesn't need a prototype
send-email: get_patch_subject doesn't need a prototype
send-email: use lexical filehandles during sending
send-email: use lexical filehandles for $compose
send-email: use lexical filehandle for opendir
Conflicts:
git-send-email.perl
* sb/send-email-use-to-from-input:
send-email: Don't leak To: headers between patches
send-email: Use To: headers in patch files
Conflicts:
git-send-email.perl
You can run "make DEFAULT_TEST_TARGET=prove test" to run the test under
"prove" (or $(PROVE) if set). The output is a bit easier to read when
running many tests in parallel.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Liked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config() function signals error by returning -1 in
two instances:
1. An actual error occurs in opening a config file (parse
errors cause an immediate die).
2. Of the three possible config files, none was found.
However, this second case is often not an error at all; it
simply means that the user has no configuration (they are
outside a repo, and they have no ~/.gitconfig file). This
can lead to confusing errors, such as when the bash
completion calls "git config --list" outside of a repo. If
the user has a ~/.gitconfig, the command completes
succesfully; if they do not, it complains to stderr.
This patch allows callers of git_config to distinguish
between the two cases. Error is signaled by -1, and
otherwise the return value is the number of files parsed.
This means that the traditional "git_config(...) < 0" check
for error should work, but callers who want to know whether
we parsed any files or not can still do so.
[jc: with tests from Jonathan]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line contains nothing but whitespace with at least one tab
and the core.whitespace config option contains blank-at-eol, the
whitespace on the line is being printed twice, once unhighlighted
(unless otherwise matched by one of the other core.whitespace values),
and a second time highlighted for blank-at-eol.
Update the leading indentation check to stop checking when it reaches
the trailing whitespace.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance the test_decode_color function to handle all common color codes,
including background colors and escapes that contain multiple codes.
This change necessitates changing <WHITE> to <BOLD>, so update t4034
as well.
This change is necessary for the next commit in order to test
background colors properly.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encode.pm started updating the string to decode in-place when a second
argument is passed in version 2.40.
This causes 'decode_utf8("", Encode::FB_CROAK)' to die with a message
like:
Modification of a read-only value attempted at .../Encode.pm line 216.
Work around this by passing an empty variable instead of a constant
string.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "shortlog" command defaults to HEAD only when its standard input is
connected to a terminal; otherwise it acts in the traditional "filter"
mode to read and summarize the "git log" output.
Two new tests added to t4203 assumed that the command always default to
HEAD, but when the standard input is closed (or connected to /dev/null),
it output empty, which is a summary of its empty input, causing the test
to break.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/t9001-send-email.sh: fix stderr redirection in 'Invalid In-Reply-To'
Clarify and extend the "git diff" format documentation
git-show-ref.txt: clarify the pattern matching
documentation: git-config minor cleanups
Update test script annotate-tests.sh to handle missing/extra authors
The current script used by annotate-tests.sh (used by t8001 and t8002) fails
to emit a warning if any of the expected authors never show up in the output
or if authors that show up in the output were never specified as expected.
Update the script to fail in both of these scenarios.
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing via builtin transports (like file://, git://), the
underlying transport helper (in this case, git-pack-objects) did not get
the --progress option, even if it was passed to git push.
Fix this, and update the tests to reflect this.
Note that according to the git-pack-objects documentation, we can safely
apply the usual --progress semantics for the transport commands like
clone and fetch (and for pushing over other smart transports).
Reported-by: Chase Brammer <cbrammer@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Chase Brammer <cbrammer@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For terminal tests that capture output/stderr, the TTY prerequisite
warning does not quite work for commands like
test_terminal foo >out 2>err
because the warning gets "swallowed" up by the redirection that's
supposed only to be done by the subcommand.
Even worse, the outcome depends on whether stdout was already a
terminal (in which case test_terminal is a noop) or not (in which case
test_terminal introduces a pseudo-tty in the middle of the pipeline).
$ test_terminal.perl sh -c 'test -t 1 && echo >&2 YES' >out
YES
$ sh -c 'test -t 1 && echo >&2 YES' >out
$
So:
- use the test_terminal script even when running with "-v".
- skip tests that require a terminal when the test_terminal
script is unusable because IO::Pty is not installed.
- write the "need to declare TTY prerequisite" message to fd 4,
where it will be printed when running tests with -v, rather
than being swallowed up by an unrelated redireciton.
Noticed-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to forget to declare the TTY prerequisite when
writing tests on a system where it would always be satisfied
(because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16
for example). Automatically detect this problem so there is
no need to remember.
test_terminal: need to declare TTY prerequisite
test_must_fail: command not found: test_terminal echo hi
test_terminal returns status 127 in this case to simulate
not being available.
Also replace the SIMPLEPAGERTTY prerequisite on one test with
"SIMPLEPAGER,TTY", since (1) the latter is supported now and
(2) the prerequisite detection relies on the TTY prereq being
explicitly declared.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is plumbing to prepare helpers like test_terminal to notice buggy
test scripts that do not declare all of the necessary prerequisites.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some outputs (like the pager) care whether stdout is a
terminal. Others (like progress meters) care about stderr.
This patch sets up both. Technically speaking, we could go
further and set up just one (because either the other goes
to a terminal, or because our tests are only interested in
one). This patch does both to keep the interface to
lib-terminal simple.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other tests besides the pager ones may want to check how we handle
output to a terminal. This patch makes the code reusable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b541248 (merge.conflictstyle: choose between "merge" and "diff3
-m" styles, 2008-08-29), git-merge-file uses setup_directory_gently(),
thus cd'ing around to find any possible config files to use.
This broke merge-file when it is called from within a subdirectory of
a repository, and the arguments are all relative paths.
Fix by prepending the prefix, as passed down from the main git
setup code, if there is any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A seemingly innocuous change like adding test_tick somewhere can
completely upset the final mailmap test, since it checks commit
hashes and dates. Make the test less fragile by fuzzing away the
unpredictable parts and leaving in the authors (which is what the
test is about, anyway).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
Documentation: No argument of ALLOC_GROW should have side-effects
On an x86_64 system (F13-based), I ran these commands in an empty directory:
git init
printf '%s\n' \
'<jdoe@example.com> <jdoe@example.COM>' \
'John <jdoe@example.com>' > .mailmap
git shortlog < /dev/null
Here's the result:
(reading log message from standard input)
*** glibc detected *** git: free(): invalid pointer: 0x0000000000f53730 ***
======= Backtrace: =========
/lib64/libc.so.6[0x31ba875676]
git[0x48c2a5]
git[0x4b9858]
...
zsh: abort (core dumped) git shortlog
What happened?
Some .mailmap entry is of the <email1> <email2> form,
while a subsequent one looks like "User Name <Email2>,
and the two email addresses on the right are not identical
but are "equal" when using a case-insensitive comparator.
Then, when add_mapping is processing the latter line, new_email is NULL
and we free me->email, yet do not replace it with a new strdup'd string.
Thus, when later we attempt to use the buffer behind that ->email pointer,
we reference freed memory.
The solution is to free ->email and ->name only if we're about to replace them.
[jc: squashed in the tests from Jonathan]
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a submodule directory has not been filled by "git submodule update"
yet, then "git submodule sync" must still update the super-project's
configuration for submodule.<name>.url.
This situation occurs when switching between branches with a module from
different urls and other branches without the submodule.
Signed-off-by: Andreas Köhler <andi5.py@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.3-rc0~75^2 (Teach fast-import to import subtrees named by tree id,
2010-06-30) has a shortcoming - it doesn't allow the root to be set.
Extend this behaviour by allowing the root to be referenced as the
empty path, "".
For a command (like filter-branch --subdirectory-filter) that wants
to commit a lot of trees that already exist in the object db, writing
undeltified objects as loose files only to repack them later can
involve a significant amount of overhead.
(23% slow-down observed on Linux 2.6.35, worse on Mac OS X 10.6)
Fortunately we have fast-import (which is one of the only git commands
that will write to a pack directly) but there is not an advertised way
to tell fast-import to commit a given tree without unpacking it.
This patch changes that, by allowing
M 040000 <tree id> ""
as a filemodify line in a commit to reset to a particular tree without
any need to parse it. For example,
M 040000 4b825dc642 ""
is a synonym for the deleteall command and the fast-import equivalent of
git read-tree 4b825dc642
Signed-off-by: David Barr <david.barr@cordelta.com>
Commit-message-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Tested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit 7ce896b (Enable highlight executable path as a
configuration option, 2010-09-21) forgot to update t9500 test.
While at it, describe highlight test better.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove a call to 'git config --unset difftool.prompt', since that is
already unset by restore_test_defaults.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also prefix several relevant git merge commands with 'test_must_fail' to
keep the tests passing.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also move repeated tag and branch deletions into a separate setup test, to
avoid failures from tags and branches having already been deleted.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a couple test_must_fail invocations where needed, and avoid
one-shot environment variable export and function calls.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 8b12413 (color: allow multiple attributes 2010-02-27),
diff.color.new has been unused in t4026, so also remove the final unsetting
of that value to make the third to last test pass with appropriate
'&&' chaining.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add test_might_fail in front of the git_config --unset commands that
may be trying to unset a value that never got set (due to a previous
failing test) or that were already unset.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also replace '|| return 1' by '&&' to allow chain of operations to be
checked for proper return status, and modify the update-index command
as suggested by Jonathan Nieder to not exit early but try to make sure
files that match the work tree are marked as matching.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, replace "|| return 1" with "&&" in order to keep commands chained.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit takes advantage of Ævar Arnfjörð Bjarmason's recent change
to test_expect_code (test-lib: make test_expect_code a test command) to
simplify several testcases.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change test_expect_code to be a normal test command instead of a
top-level command.
As a top-level command it would fail in cases like:
test_expect_code 1 'phoney' '
foo && bar && (exit 1)
'
Here the test might incorrectly succeed if "foo" or "bar" happened to
fail with exit status 1. Instead we now do:
test_expect_success 'phoney' '
foo && bar && test_expect_code 1 "(exit 1)"
'
Which will only succeed if "foo" and "bar" return status 0, and "(exit
1)" returns status 1. Note that test_expect_code has been made slightly
noisier, as it reports the exit code it receives even upon success.
Some test code in t0000-basic.sh relied on the old semantics of
test_expect_code to test the test_when_finished command. I've
converted that code to use an external test similar to the TODO test I
added in v1.7.3-rc0~2^2~3.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-clone: describe --mirror more verbosely
do not depend on signed integer overflow
work around buggy S_ISxxx(m) implementations
xdiff: cast arguments for ctype functions to unsigned char
init: plug tiny one-time memory leak
diffcore-pickaxe.c: remove unnecessary curly braces
t3020 (ls-files-error-unmatch): remove stray '1' from end of file
setup: make sure git dir path is in a permanent buffer
environment.c: remove unused variable
git-svn: fix processing of decorated commit hashes
git-svn: check_cherry_pick should exclude commits already in our history
Documentation/git-svn: discourage "noMetadata"
If the first patch in a series has a To: header in the file and the
second patch in the series doesn't the address from the first patch will
be part of the To: addresses in the second patch. Fix this by treating the
to list like the cc list. Have an initial to list come from the command
line, user input and config options. Then build up a to list from each
patch and concatenate the two together before sending the patch. Finally,
reset the list after sending each patch so the To: headers from a patch
don't get used for the next one.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon program invocation, MSYS converts environment variables containing
path-like values from Unix-style to DOS-style under the assumption that
the program being invoked understands only DOS-style pathnames. For
instance, the Unix-style path /msysgit is translated to c:/msysgit. For
test t5560, the path being requested from git-http-backend is specified
via environment variable PATH_INFO as a URL path of the form
/repo.git/foobar, which git-http-backend combines with GIT_PROJECT_ROOT
to determine the actual physical path within the repository. This is a
case where MSYS's conversion of the path-like value of PATH_INFO causes
harm, for two reasons. First, the resulting converted path, when joined
with GIT_PROJECT_ROOT is bogus (for instance,
"C:/msysgit/git/t/trash-zzz/C:/msysgit/repo.git/HEAD"). Second, the
converted PATH_INFO path is rejected by git-http-backend as an 'alias'
due to validation failure on the part of daemon_avoid_alias().
Unfortunately, the standard work-around of doubling the leading slash
(i.e. //repo.git/foobar) to suppress MSYS path conversion works only for
command-line arguments, but not for environment variables.
Consequently, side step the problem by instead passing git-http-backend
an already-constructed full path rather than components GIT_PROJECT_ROOT
and PATH_INFO.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
By default, MSYS sed throws away CR from CRLF line-endings. Tests
t6038.5 and t6038.6 employ sed to normalize conflict output of git-merge
for validation purposes. These tests expect CRLF line-endings to be
present in the normalized output of git-merge, and thus fail when sed
undesirably removes CR. Fix by employing sed's -b/--binary switch to
suppress its default behavior of dropping CR characters.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
By default, MSYS grep reads in text-mode and converts CRLF into LF line
endings. For testing HTTP use binary mode (-U) as checking is done for
CR in HTTP headers
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
These two tests fail on msysGit because /dev/null is an alias for nul on
Windows and when reading the value back from git config the alias does
not match the real filename. Also the HOME environment variable has a
unix-style path but git returns a native equivalent path for '~'. As
these are platform-dependent equivalent results it seems simplest to
skip the test entirely.
Moves the NOT_MINGW prereq from t5503 into the test library.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* maint:
Fix typo in pack-objects' usage
Make sure that git_getpass() never returns NULL
t0004 (unwritable files): simplify error handling
rev-list-options: clarify --parents and --children
Change `while(<$fh>) { my $c = $_' to `while(my $c = <$fh>) {', and
use `chomp $c' instead of `$c =~ s/\n$//g;', the two are equivalent in
this case.
I've also changed the --cccmd test so that we test for the stripping
of whitespace at the beginning of the lines returned from the
--cccmd. I think we probably shouldn't do this, but it was there
already so I haven't changed the behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can set the GITWEB_TEST_INSTALLED environment variable to the
gitwebdir (the directory where gitweb is installed / deployed to) of
an existing gitweb instalation, or to the pathname of installed gitweb
script, to test that installation.
This change is intended to make it possible to test that process of
installing gitweb and the modules it depends on works correctly (after
splitting gitweb).
If GITWEB_TEST_INSTALLED is used, print what script are we testing
to make it easy to spot that we test installed gitweb.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of
... normal test script ...
status=$?
... cleanup ...
(exit $status)
set up cleanup commands with test_when_finished. This makes the
test script a little shorter, and more importantly, it ensures errors
during cleanup are reported.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame --textconv is wrongly calling the textconv filter on
symlinks: symlinks are stored as blobs whose content is the target of
the link, and blame calls the textconv filter on a temporary file
filled-in with the content of this blob.
For example:
$ git blame -C -C regular-file.pdf
Error: May not be a PDF file (continuing anyway)
Error: PDF file is damaged - attempting to reconstruct xref table...
Error: Couldn't find trailer dictionary
Error: Couldn't read xref table
Warning: program returned non-zero exit code #1
fatal: unable to read files to diff
That errors come from pdftotext run on symlink.pdf being extracted to
/tmp/ with one-line plain-text content pointing to link destination.
So several failures are demonstrated here:
- git cat-file --textconv :symlink.bin # also HEAD:symlink.bin
- git blame --textconv symlink.bin
- git blame -C -C --textconv regular-file # but also looks on symlink.bin
At present they all fail with something like.
E: /tmp/j3ELEs_symlink.bin is not "binary" file
NOTE: git diff doesn't try to textconv the pathnames, it runs the
textual diff without textconv, which is the expected behavior.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The textconv filter is sometimes incorrectly ran on a temporary file
whose content is the target of a symbolic link, instead of actual file
content. Prepare to test this by marking the content of the file to
convert with "bin:", and let the helper die if "bin:" is not found in
the file content.
NOTE: I've changed $@ to $1 in helper becase textconv program "should
take a single argument" (see Documentation/gitattributes.txt), so
making this more explicit makes sense and also helps to avoid
problems with feeding arguments to echo.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/grep-header-all-match-fix:
log --author: take union of multiple "author" requests
grep: move logic to compile header pattern into a separate helper
* jc/pickaxe-grep:
diff/log -G<pattern>: tests
git log/diff: add -G<regexp> that greps in the patch text
diff: pass the entire diff-options to diffcore_pickaxe()
gitdiffcore doc: update pickaxe description
* rr/fmt-merge-msg:
t6200-fmt-merge-msg: Exercise '--log' to configure shortlog length
t6200-fmt-merge-msg: Exercise 'merge.log' to configure shortlog length
merge: Make 'merge.log' an integer or boolean option
merge: Make '--log' an integer option for number of shortlog entries
fmt_merge_msg: Change fmt_merge_msg API to accept shortlog_len
Conflicts:
builtin/merge.c
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash branch <branch> <stash>" started discarding the stash
when the branch creation fails. It should have kept the stash
intact when aborting.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This bug was disovered by someone on IRC when he tried to
$ git stash branch <branch> <stash>
while <branch> already existed. In that case the stash is dropped even
though it isn't applied on any branch, so the stash is effectively lost.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to use a command line --to-cmd=cmd
to create the list of "To:" addresses.
Used a shared routine for --cc-cmd and --to-cmd.
Did not use IPC::Open2, leaving that for Ævar if
ever he decides to fix the other bugs he might find.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test was missing some "&&" at the end of some lines and it
was wrong because, as the replacement refs were not fetched,
the commits from the parallel branch should not show up. This
was found by Elijah Newren.
This is fixed by checking that after the branch from HASH6 is
fetched, the commits from the parallel branch don't show up,
and then by fetching the replacement refs and checking that
they do show up afterwards.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems which have dash as /bin/sh, such as Ubuntu, the final
test (master@{n} for various n) fails with a syntax error while
processing an arithmetic expansion. The syntax error is caused by
using a bare name ('N') as a variable reference in the expression.
In order to avoid the syntax error, we spell the variable reference
as '$N' rather than simply 'N'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick will segfault when transplanting a root commit if the --ff
option is used. This happens because the "parent" pointer is set to NULL
when the commit being cherry-picked has no parents. Later, when "parent"
is dereferenced, the cherry-pick segfaults.
Fix this by checking whether "parent" is NULL before dereferencing it and
add a test for this case of cherry-picking a root commit with --ff.
Reported-by: Zbyszek Szmek <zbyszek@in.waw.pl>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-stash uses `git rev-parse --no-revs -- "$@"` to set its
FLAGS variable. This is the same as `FLAGS="-- $@"`. It should use
`git rev-parse --no-revs --flags "$@"`, but that eats any "-q" or
"--quiet" argument. So move the check for quiet before rev-parse.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, the 'stash show' functionality was broken for the case when a
stash-like argument was supplied. Since, commit 9bf09e, 'stash show' when
supplied a stash-like argument prints nothing and still exists with a zero
status. Unfortunately, the flaw slipped through the test suite cracks
since the output of 'stash show' was not verified to be correct.
Improve and expand on the existing tests so that this flaws is detected.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-base between @$parents and $merge_tip may have been reached
through a merge commit. This means that some commits that are ancestors
of @$parents will not be ancestors of $merge_base. The mergeinfo
property will not list commits that are ancestors of @$parents, so we
need to explicitly exclude them.
[ew: squashed and cleaned up test case from Steven]
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
When we're diffing symlinks, we consider the contents to be
the pathname that the symlink points to. When a user sets up
a userdiff driver like "*.pdf diff=pdf", their "diff.pdf.*"
config generally tells us what to do with the content of
pdf files.
With the current code, we will actually process a symlink
like "link.pdf" using a configured pdf driver, meaning we
are using contents which consist of a pathname with
configuration that is expecting contents that consist of an
actual pdf file.
The most noticeable example of this would have been
textconv; however, it was already protected in its own
textconv-specific code path. We can still see the breakage
with something like "diff.*.binary", though. You could
also see it with diff.*.funcname, though it is a bit harder
to trigger accidentally there.
This patch adds a check for S_ISREG lower in the callstack
than the textconv-specific check, which should block use of
any userdiff config for non-regular files. We can drop the
check in the textconv code, which is now redundant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ancient touch on Solaris 7 thinks that a decimal number supplied as
the first argument specifies a date_time to give to the files specified by
the remaining arguments. In this case, it fails to parse '1' as a proper
date_time and exits with a failure status. Workaround this flaw by
rearranging the arguments supplied to touch so that a non-digit appears
first and touch will not be confused.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/fix-test:
t1020: Get rid of 'cd "$HERE"' at the start of each test
t2016 (checkout -p): add missing &&
t1302 (core.repositoryversion): style tweaks
t2105 (gitfile): add missing &&
t1450 (fsck): remove dangling objects
tests: subshell indentation stylefix
Several tests: cd inside subshell instead of around
t7003-filter-branch.sh had a make_commit() function that was identical
to test_commit() in test-lib.sh except that it used tr to create a
lowercase file name from the uppercase branch name instead of
appending ".t".
Not only is this unneeded code duplication, it also was something
simply waiting to fail on case-insensitive file systems. So replace
all uses of make_commit with test_commit.
While we're editing the setup, chain it together with && so that
failures early in the sequence don't get lost and add a commit graph.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the olden days,
log --author=me --committer=him --grep=this --grep=that
used to be turned into:
(OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(PATTERN this)
(PATTERN that))
showing my patches that do not have any "this" nor "that", which was
totally useless.
80235ba ("log --author=me --grep=it" should find intersection, not union,
2010-01-17) improved it greatly to turn the same into:
(ALL-MATCH
(HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR (PATTERN this) (PATTERN that)))
That is, "show only patches by me and committed by him, that have either
this or that", which is a lot more natural thing to ask.
We however need to be a bit more clever when the user asks more than one
"author" (or "committer"); because a commit has only one author (and one
committer), they ought to be interpreted as asking for union to be useful.
The current implementation simply added another author/committer pattern
at the same top-level for ALL-MATCH to insist on matching all, finding
nothing.
Turn
log --author=me --author=her \
--committer=him --committer=you \
--grep=this --grep=that
into
(ALL-MATCH
(OR (HEADER-AUTHOR me) (HEADER-AUTHOR her))
(OR (HEADER-COMMITTER him) (HEADER-COMMITTER you))
(OR (PATTERN this) (PATTERN that)))
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "$GIT_BUILD_DIR" instead of "$TEST_DIRECTORY/.." (both defined in
t/test-lib.sh) in t/gitweb-lib.sh. It better describes the intent.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
