Fix a logic error in a082345372 (hook API: fix v2.36.0 regression:
hooks should be connected to a TTY, 2022-06-07). When it started using
the "ungroup" API added in fd3aaf53f7 (run-command: add an "ungroup"
option to run_process_parallel(), 2022-06-07) it should have made the
same sort of change that fd3aaf53f7 itself made in
"t/helper/test-run-command.c".
The correct way to emit this "Couldn't start" output with "ungroup"
would be:
fprintf(stderr, _("Couldn't start hook '%s'\n"), hook_path);
But we should instead remove the emitting of this output. As the added
test shows we already emit output when we can't run the child. The
"cannot run" output here is emitted by run-command.c's
child_err_spew().
So the addition of the "Couldn't start hook" output here in
96e7225b31 (hook: add 'run' subcommand, 2021-12-22) was always
redundant. For the pre-commit hook we'll now emit exactly the same
output as we did before f443246b9f (commit: convert
{pre-commit,prepare-commit-msg} hook to hook.h, 2021-12-22) (and
likewise for others).
We could at this point add this to the pick_next_hook() callbacks in
hook.c:
assert(!out);
assert(!*pp_task_cb);
And this to notify_start_failure() and notify_hook_finished() (in the
latter case the parameter is called "pp_task_cp"):
assert(!out);
assert(!pp_task_cb);
But let's leave any such instrumentation for some eventual cleanup of
the "ungroup" API.
Reported-by: Ilya K <me@0upti.me>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
Fix a regression reported[1] against f443246b9f (commit: convert
{pre-commit,prepare-commit-msg} hook to hook.h, 2021-12-22): Due to
using the run_process_parallel() API in the earlier 96e7225b31 (hook:
add 'run' subcommand, 2021-12-22) we'd capture the hook's stderr and
stdout, and thus lose the connection to the TTY in the case of
e.g. the "pre-commit" hook.
As a preceding commit notes GNU parallel's similar --ungroup option
also has it emit output faster. While we're unlikely to have hooks
that emit truly massive amounts of output (or where the performance
thereof matters) it's still informative to measure the overhead. In a
similar "seq" test we're now ~30% faster:
$ cat .git/hooks/seq-hook; git hyperfine -L rev origin/master,HEAD~0 -s 'make CFLAGS=-O3' './git hook run seq-hook'
#!/bin/sh
seq 100000000
Benchmark 1: ./git hook run seq-hook' in 'origin/master
Time (mean ± σ): 787.1 ms ± 13.6 ms [User: 701.6 ms, System: 534.4 ms]
Range (min … max): 773.2 ms … 806.3 ms 10 runs
Benchmark 2: ./git hook run seq-hook' in 'HEAD~0
Time (mean ± σ): 603.4 ms ± 1.6 ms [User: 573.1 ms, System: 30.3 ms]
Range (min … max): 601.0 ms … 606.2 ms 10 runs
Summary
'./git hook run seq-hook' in 'HEAD~0' ran
1.30 ± 0.02 times faster than './git hook run seq-hook' in 'origin/master'
1. https://lore.kernel.org/git/CA+dzEBn108QoMA28f0nC8K21XT+Afua0V2Qv8XkR8rAeqUCCZw@mail.gmail.com/
Reported-by: Anthony Sottile <asottile@umich.edu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
[jc: minor fix-up to tests for consistency]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start following-up on the rename mentioned in c7c4bdeccf (run-command
API: remove "env" member, always use "env_array", 2021-11-25) of
"env_array" to "env".
The "env_array" name was picked in 19a583dc39 (run-command: add
env_array, an optional argv_array for env, 2014-10-19) because "env"
was taken. Let's not forever keep the oddity of "*_array" for this
"struct strvec", but not for its "args" sibling.
This commit is almost entirely made with a coccinelle rule[1]. The
only manual change here is in run-command.h to rename the struct
member itself and to change "env_array" to "env" in the
CHILD_PROCESS_INIT initializer.
The rest of this is all a result of applying [1]:
* make contrib/coccinelle/run_command.cocci.patch
* patch -p1 <contrib/coccinelle/run_command.cocci.patch
* git add -u
1. cat contrib/coccinelle/run_command.pending.cocci
@@
struct child_process E;
@@
- E.env_array
+ E.env
@@
struct child_process *E;
@@
- E->env_array
+ E->env
I've avoided changing any comments and derived variable names here,
that will all be done in the next commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a Time-of-check to time-of-use (TOCTOU) race in code added in
680ee550d7 (commit: skip discarding the index if there is no
pre-commit hook, 2017-08-14).
This obscure race condition can occur if we e.g. ran the "pre-commit"
hook and it modified the index, but hook_exists() returns false later
on (e.g., because the hook itself went away, the directory became
unreadable, etc.). Then we won't call discard_cache() when we should
have.
The race condition itself probably doesn't matter, and users would
have been unlikely to run into it in practice. This problem has been
noted on-list when 680ee550d7 was discussed[1], but had not been
fixed.
This change is mainly intended to improve the readability of the code
involved, and to make reasoning about it more straightforward. It
wasn't as obvious what we were trying to do here, but by having an
"invoked_hook" it's clearer that e.g. our discard_cache() is happening
because of the earlier hook execution.
Let's also change this for the push-to-checkout hook. Now instead of
checking if the hook exists and either doing a push to checkout or a
push to deploy we'll always attempt a push to checkout. If the hook
doesn't exist we'll fall back on push to deploy. The same behavior as
before, without the TOCTOU race. See 0855331941 (receive-pack:
support push-to-checkout hook, 2014-12-01) for the introduction of the
previous behavior.
This leaves uses of hook_exists() in two places that matter. The
"reference-transaction" check in refs.c, see 6754159767 (refs:
implement reference transaction hook, 2020-06-19), and the
"prepare-commit-msg" hook, see 66618a50f9 (sequencer: run
'prepare-commit-msg' hook, 2018-01-24).
In both of those cases we're saving ourselves CPU time by not
preparing data for the hook that we'll then do nothing with if we
don't have the hook. So using this "invoked_hook" pattern doesn't make
sense in those cases.
The "reference-transaction" and "prepare-commit-msg" hook also aren't
racy. In those cases we'll skip the hook runs if we race with a new
hook being added, whereas in the TOCTOU races being fixed here we were
incorrectly skipping the required post-hook logic.
1. https://lore.kernel.org/git/20170810191613.kpmhzg4seyxy3cpq@sigill.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the running of the 'post-checkout' hook away from run-command.h
to the new hook.h library in builtin/worktree.c. For this special case
we need a change to the hook API to teach it to run the hook from a
given directory.
We cannot skip the "absolute_path" flag and just check if "dir" is
specified as we'd then fail to find our hook in the new dir we'd
chdir() to. We currently don't have a use-case for running a hook not
in our "base" repository at a given absolute path, so let's have "dir"
imply absolute_path(find_hook(hook_name)).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a run_hooks_l() wrapper, we'll use it in subsequent commits for
the simple cases of wanting to run a single hook under a given name
along with a list of arguments.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a run_hooks() wrapper, we'll use it in subsequent commits for the
simple cases of wanting to run a single hook under a given name,
without providing options such as "env" or "args".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a boolean version of the find_hook() function for those callers
who are only interested in checking whether the hook exists, not what
the path to it is.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the find_hook() function from run-command.c to a new hook.c
library. This change establishes a stub library that's pretty
pointless right now, but will see much wider use with Emily Shaffer's
upcoming "configuration-based hooks" series.
Eventually all the hook related code will live in hook.[ch]. Let's
start that process by moving the simple find_hook() function over
as-is.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
