When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The testcase verifies that 'git cvsexportcommit' functions correctly when
the '-w' option is used, and GIT_DIR is set to a relative path (e.g. '.').
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For some reason, t5505-remote was setting GIT_CONFIG to .git/config
and exporting it. This should have been no-op, as test framework did
the same for a long time anyway.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-am.txt: Pass -r in the example invocation of rm -f .dotest
timezone_names[]: fixed the tz offset for New Zealand.
filter-branch documentation: non-zero exit status in command abort the filter
rev-parse: fix potential bus error with --parseopt option spec handling
Use a single implementation and API for copy_file()
Documentation/git-filter-branch: add a new msg-filter example
Correct fast-export file mode strings to match fast-import standard
A non-empty line containing no spaces should be treated by --parseopt as
an option group header, but was causing a bus error. Also added a test
script for rev-parse --parseopt.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is useful when you want to see parts of the commit object name
in "describe" output, even when the commit in question happens to be
a tagged version. Instead of just emitting the tag name, it will
describe such a commit as v1.2-0-deadbeef (0th commit since tag v1.2
that points at object deadbeef....).
Signed-off-by: Santi Béjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git has difficulties on file systems that do not properly
distinguish case or modify filenames in unexpected ways. The two
major examples are Windows and Mac OS X. Both systems preserve
case of file names but do not distinguish between filenames that
differ only by case. Simple operations such as "git mv" or
"git merge" can fail unexpectedly. In addition, Mac OS X normalizes
unicode, which make git's life even harder.
This commit adds tests that currently fail but should pass if
file system as decribed above are fully supported. The test need
to be run on Windows and Mac X as they already pass on Linux.
Mitch Tishmack is the original author of the tests for unicode
normalization.
[jc: fixed-up so that it will use test_expect_success to test
on sanely behaving filesystems.]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows users with different preferences for access methods to the
same remote repositories to rewrite each other's URLs by pattern
matching across a large set of similiarly set up repositories to each
get the desired access.
For example, if you don't have a kernel.org account, you might want
settings like:
[url "git://git.kernel.org/pub/"]
insteadOf = master.kernel.org:/pub
Then, if you give git a URL like:
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
it will act like you gave it:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
and you can cut-and-paste pull requests in email without fixing them
by hand, for example.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a basic sanity check that --compose works at
all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the fake.sendmail test harness would write its
output to a hardcoded file, allowing only a single message
to be tested. Instead, let's have it save the messages for
all of its invocations so that we can see which messages
were sent, and in which order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/apply-whitespace:
ws_fix_copy(): move the whitespace fixing function to ws.c
apply: do not barf on patch with too large an offset
core.whitespace: cr-at-eol
git-apply --whitespace=fix: fix whitespace fuzz introduced by previous run
builtin-apply.c: pass ws_rule down to match_fragment()
builtin-apply.c: move copy_wsfix() function a bit higher.
builtin-apply.c: do not feed copy_wsfix() leading '+'
builtin-apply.c: simplify calling site to apply_line()
builtin-apply.c: clean-up apply_one_fragment()
builtin-apply.c: mark common context lines in lineinfo structure.
builtin-apply.c: optimize match_beginning/end processing a bit.
builtin-apply.c: make it more line oriented
builtin-apply.c: push match-beginning/end logic down
builtin-apply.c: restructure "offset" matching
builtin-apply.c: refactor small part that matches context
t4014 test used GNU extension 'Q' in its sed scripts, but the
uses can safely be replaced with 'q'. Among other platforms,
sed on Mac OS X 10.4 does not accept the former.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit e1b3a2c (Build-in merge-recursive) made the
subtree merge strategy backend unavailable. This resurrects
it.
A new test t6029 currently only tests the strategy is available,
but it should be enhanced to check the real "subtree" case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/reflog-fix: (1490 commits)
builtin-reflog.c: don't install new reflog on write failure
hash: fix lookup_hash semantics
gitweb: Better chopping in commit search results
builtin-tag.c: remove cruft
git-merge-index documentation: clarify synopsis
send-email: fix In-Reply-To regression
git-reset --hard and git-read-tree --reset: fix read_cache_unmerged()
Teach git-grep --name-only as synonym for -l
diff: fix java funcname pattern for solaris
t3404: use configured shell instead of /bin/sh
git_config_*: don't assume we are parsing a config file
prefix_path: use is_absolute_path() instead of *orig == '/'
git-clean: handle errors if removing files fails
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
git.el: Set process-environment instead of invoking env
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
cvsexportcommit: be graceful when "cvs status" reorders the arguments
Rename git-core rpm to just git and rename the meta-pacakge to git-all.
...
Conflicts:
Documentation/git-reflog.txt
t/t1410-reflog.sh
git hash-object used to process the --stdin command line argument
before reading subsequent arguments. This caused 'git hash-object
--stdin -w' to fail to actually write the object into the
database, while '-w --stdin' properly did. Now git hash-object
first reads all arguments, and then processes them.
This regresses one insane use case. git hash-object used to allow
multiple --stdin arguments on the command line:
$ git hash-object --stdin --stdin
foo
^D
bar
^D
Now git hash-object errors out if --stdin is given more than once.
Reported by Josh Triplett through
http://bugs.debian.org/464432
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When invalidating unmerged entries in the index, we used to set
their ce_mode to 0 to note the fact that they do not matter
anymore which also made sure that later unpack_trees() call
would not reuse them. Instead just remove them from the index.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake-editor shell script invoked /bin/sh; normally this
is fine, unless the /bin/sh doesn't meet our compatibility
requirements, as is the case with Solaris. Specifically, the
$() syntax used by fake-editor is not understood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean simply ignored errors if removing a file or directory failed. This
patch makes it raise a warning and the exit code also greater than zero if
there are remaining files.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/setup:
builtin-mv: minimum fix to avoid losing files
git-add: adjust to the get_pathspec() changes.
Make blame accept absolute paths
setup: sanitize absolute and funny paths in get_pathspec()
* maint:
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
When switching branches from a subdirectory, checkout rewritten
in C extracted the toplevel of the tree in there.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning a remote repository which's HEAD refers to a nonexistent
ref, git-clone cloned all existing refs, but failed to write the
configuration for 'remote'. Now it detects the dangling remote HEAD,
refuses to checkout any local branch since HEAD refers to nowhere, but
properly writes the configuration for 'remote', so that subsequent
'git fetch's don't fail.
The problem was reported by Daniel Jacobowitz through
http://bugs.debian.org/466581
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing a refspec like "HEAD", we used to treat it as
"HEAD:HEAD", which didn't work without rewriting. Instead, we should
resolve the ref. If it's a symref, further require it to point to a
branch, to avoid doing anything especially unexpected. Also remove the
rewriting previously added in builtin-push.
Since the code for "HEAD" uses the regular refspec parsing, it
automatically handles "+HEAD" without anything special.
[jc: added a further test to make sure that "remote.*.push = HEAD" works]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In my use cases, "cvs status" sometimes reordered the passed filenames,
which often led to a misdetection of a dirty state (when it was in
reality a clean state).
I finally tracked it down to two filenames having the same basename.
So no longer trust the order of the results blindly, but actually check
the file name.
Since "cvs status" only returns the basename (and the complete path on the
server which is useless for our purposes), run "cvs status" several times
with lists consisting of files with unique (chomped) basenames.
Be a bit clever about new files: these are reported as "no file <blabla>",
so in order to discern it from existing files, prepend "no file " to the
basename.
In other words, one call to "cvs status" will not ask for two files
"blabla" (which does not yet exist) and "no file blabla" (which exists).
This patch makes cvsexportcommit slightly slower, when the list of changed
files has non-unique basenames, but at least it is accurate now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have particular reviewers you want to sent particular series
to, it's nice to be able to generate the whole series with them as
additional recipients, without configuring them into your general
headers or adding them by hand afterwards.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
RFC 2822 only permits a single To: header and a single Cc: header, so
we need to turn multiple values of each of these into a list. This
will be particularly significant with a command-line option to add Cc:
headers, where the user can't make sure to configure valid header sets
in any easy way.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now each value of format.headers will always be treated as a single
valid header, and newlines will be inserted between them as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Presently, it works with each header ending with a newline, but not
without the newlines.
Also add a test to see that multiple "To:" headers get combined.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --cover-letter is provided, generate a cover letter message before
the patches, numbered 0.
Original patch thanks to Johannes Schindelin
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch" and "git checkout -b" now honor --track option even when
the upstream branch is local. Previously --track was silently ignored
when forking from a local branch. Also the command did not error out
when --track was explicitly asked for but the forked point specified
was not an existing branch (i.e. when there is no way to set up the
tracking configuration), but now it correctly does.
The configuration setting branch.autosetupmerge can now be set to
"always", which is equivalent to using --track from the command line.
Setting branch.autosetupmerge to "true" will retain the former behavior
of only setting up branch.*.merge for remote upstream branches.
Includes test cases for the new functionality.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests -o, and an excessively long subject, and --thread, with and
without --in-reply-to=
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge conflicts, there are often common lines that are not really
common, such as empty lines or lines containing a single curly bracket.
With XDL_MERGE_ZEALOUS_ALNUM, we use the following heuristics: when a
hunk does not contain any letters or digits, it is treated as conflicting.
In other words, a conflict which used to look like this:
<<<<<<<
a = 1;
=======
output();
>>>>>>>
}
}
}
<<<<<<<
output();
=======
b = 1;
>>>>>>>
will look like this with ZEALOUS_ALNUM:
<<<<<<<
a = 1;
}
}
}
output();
=======
output();
}
}
}
b = 1;
>>>>>>>
To demonstrate this, git-merge-file has been switched from
XDL_MERGE_ZEALOUS to XDL_MERGE_ZEALOUS_ALNUM.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a merge conflicts, there are often less than three common lines
between two conflicting regions.
Since a conflict takes up as many lines as are conflicting, plus three
lines for the commit markers, the output will be shorter (and thus,
simpler) in this case, if the common lines will be merged into the
conflicting regions.
This patch merges up to three common lines into the conflicts.
For example, what looked like this before this patch:
<<<<<<<
if (a == 1)
=======
if (a != 0)
>>>>>>>
{
int i;
<<<<<<<
a = 0;
=======
a = !a;
>>>>>>>
will now look like this:
<<<<<<<
if (a == 1)
{
int i;
a = 0;
=======
if (a != 0)
{
int i;
a = !a;
>>>>>>>
Suggested Linus (based on ideas by "Voltage Spike" -- if that name is
real, it is mighty cool).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pb/prepare-commit-msg:
git-commit: add a prepare-commit-msg hook
git-commit: Refactor creation of log message.
git-commit: set GIT_EDITOR=: if editor will not be launched
git-commit: support variable number of hook arguments
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were several points where we looked at the HEAD
commit; for initial commits, this is meaningless. So instead
we:
- show staged status data as a diff against the empty tree
instead of HEAD
- show file diffs as creation events
- use "git rm --cached" to revert instead of going back to
the HEAD commit
We magically reference the empty tree to implement this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
commit: discard index after setting up partial commit
filter-branch: handle filenames that need quoting
diff: Fix miscounting of --check output
hg-to-git: fix parent analysis
mailinfo: feed only one line to handle_filter() for QP input
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Add "const" qualifier to "char *excludes_file".
Add "const" qualifier to "char *editor_program".
Add "const" qualifier to "char *pager_program".
config: add 'git_config_string' to refactor string config variables.
diff.c: remove useless check for value != NULL
fast-import: check return value from unpack_entry()
Validate nicknames of remote branches to prohibit confusing ones
diff.c: replace a 'strdup' with 'xstrdup'.
diff.c: fixup garding of config parser from value=NULL
There may still be some entries from the original index that
should be discarded before we show the status. In
particular, if a file was added in the index but not
included in the partial commit, it would still show up in
the status listing as staged for commit.
Ultimately the correct fix is to keep the two states in
separate index_state variables. Then we can avoid having
to reload the cache from the temporary file altogether, and
just point wt_status_print at the correct index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command used a very old fashioned construct to extract
filenames out of diff-index and ended up corrupting the output.
We can simply use --name-only and pipe into --stdin mode of
update-index. It's been like that for the past 2 years or so
since a94d994 (update-index: work with c-quoted name).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c1795bb (Unify whitespace checking) incorrectly made the
checking function return without incrementing the line numbers
when there is no whitespace problem is found on a '+' line.
This resurrects the earlier behaviour.
Noticed and reported by Jay Soffian. The test script was stolen
from Jay's independent fix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is intended to be fed one logical line at a time to
inspect, but a QP encoded raw input line can have more than one
lines, just like BASE64 encoded one.
Quoting LF as =0A may be unusual but RFC2045 allows it.
The issue was noticed and fixed by Jay Soffian. JC added a test
to protect the fix from regressing later.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
config: add test cases for empty value and no value config variables.
cvsimport: have default merge regex also match beginning of commit message
git clone -s documentation: force a new paragraph for the NOTE
status: suggest "git rm --cached" to unstage for initial commit
Protect get_author_ident_from_commit() from filenames in work tree
upload-pack: Initialize the exec-path.
bisect: use verbatim commit subject in the bisect log
git-cvsimport.txt: fix '-M' description.
Revert "pack-objects: only throw away data during memory pressure"
The tests in 't1300-repo-config.sh' did not check what happens when
an empty value like the following is used in the config file:
[emptyvalue]
variable =
Also it was not checked that a variable with no value like the
following:
[novalue]
variable
gives a boolean "true" value, while an ampty value gives a boolean
"false" value.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense to suggest "git reset HEAD" since we have
no HEAD commit. This actually used to work but regressed in
f26a0012.
wt_status_print_cached_header was updated to take the whole
wt_status struct rather than just the reference field.
Previously the various code paths were sometimes sending in
s->reference and sometimes sending in NULL, making the
decision on whether this was an initial commit before we
even got to this function. Now we must check the initial
flag here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to use "cat-file commit $commit" to extract the original
author information from existing commit, but an earlier commit
5ac2715 (Consistent message encoding while reusing log from an
existing commit) changed it to use "git show -s $commit". If
you have a file in your work tree that can be interpreted as a
valid object name (e.g. "HEAD"), this conversion will not work.
Disambiguate by marking the end of revision parameter on the
comand line with an explicit "--" to fix this.
This breakage is most visible with rebase when a file called
"HEAD" exists in the worktree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The testcase verifies that 'git cvsexportcommit' functions correctly when
the '-w' option is used, and GIT_DIR is set to a relative path (e.g. '.').
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/in-core-index:
lazy index hashing
Create pathname-based hash-table lookup into index
read-cache.c: introduce is_racy_timestamp() helper
read-cache.c: fix a couple more CE_REMOVE conversion
Also use unpack_trees() in do_diff_cache()
Make run_diff_index() use unpack_trees(), not read_tree()
Avoid running lstat(2) on the same cache entry.
index: be careful when handling long names
Make on-disk index representation separate from in-core one
Previously a patch that records too large a line number caused the
offset matching code in git-apply to overstep its internal buffer.
Noticed by Johannes Schindelin.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This establishes what the "bad" whitespaces are for this
project.
The rules are:
- Unless otherwise specified, indent with SP that could be
replaced with HT are not "bad". But SP before HT in the
indent is "bad", and trailing whitespaces are "bad".
- For C source files, initial indent by SP that can be replaced
with HT is also "bad".
- Test scripts in t/ and test vectors in its subdirectories can
contain anything, so we make it unrestricted for now.
Anything "bad" will be shown in WHITESPACE error indicator in
diff output, and "apply --whitespace=warn" will warn about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Write errors when repacking (eg, due to out-of-space conditions)
can leave temporary packs (and possibly other files beginning
with "tmp_") lying around which no existing
codepath removes and which aren't obvious to the casual user.
These can also be multi-megabyte files wasting noticeable space.
Unfortunately there's no way to definitely tell in builtin-prune
that a tmp_ file is not being used by a concurrent process,
such as a fetch. However, it is documented that pruning should
only be done on a quiet repository and --expire is honoured
(using code from Johannes Schindelin, along with a test case
he wrote) so that its safety is the same as that of loose
object pruning.
Since they might be signs of a problem (unlike orphaned loose
objects) the names of any removed files are printed.
Signed-off-by: David Tweed (david.tweed@gmail.com)
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of insisting on a symbolic ref, bisect now accepts detached
HEADs, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_beginning_of_line didn't take into account that the
previous line might have ended with \ in which case it shouldn't
stop but continue its search.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" has the option --max-pack-size to limit the file
size of the packs to a certain amount of bytes. On platforms where
the pack file size is limited by filesystem constraints, it is easy
to forget this option, and this option does not exist for "git gc"
to begin with.
So introduce a config variable to set the default maximum, but make
this overrideable by the command line.
Suggested by Tor Arvid Lund.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the test failed, it was giving really unclear ed script
output. Instead, give a diff that sort of suggests the problem. Also
replaces the use of "git diff" for this purpose with "diff -u".
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
There was an embarrassing pair of off-by-one miscounting that
failed to match path "a/b/c" when "a/.gitattributes" tried to
name it with relative path "b/c".
This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests in 't1300-repo-config.sh' did not check what happens when
an empty value like the following is used in the config file:
[emptyvalue]
variable =
Also it was not checked that a variable with no value like the
following:
[novalue]
variable
gives a boolean "true" value, while an ampty value gives a boolean
"false" value.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we set the GIT_CONFIG environment variable in
our tests so that only that file was read. However, setting
it to a static value is not correct, since we are not
necessarily always in the same directory; instead, we want
the usual git config file lookup to happen.
To do this, we stop setting GIT_CONFIG, which means that we
must now suppress the reading of the system-wide and user
configs.
This exposes an incorrect test in t1500, which is also
fixed (the incorrect test worked because we were failing to
read the core.bare value from the config file, since the
GIT_CONFIG variable was pointing us to the wrong file).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Numeric color only worked if it was at end of line.
Noticed by Chris Larson <clarson@kergoth.com>.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CRLF conversion bears a slight chance of corrupting data.
autocrlf=true will convert CRLF to LF during commit and LF to
CRLF during checkout. A file that contains a mixture of LF and
CRLF before the commit cannot be recreated by git. For text
files this is the right thing to do: it corrects line endings
such that we have only LF line endings in the repository.
But for binary files that are accidentally classified as text the
conversion can corrupt data.
If you recognize such corruption early you can easily fix it by
setting the conversion type explicitly in .gitattributes. Right
after committing you still have the original file in your work
tree and this file is not yet corrupted. You can explicitly tell
git that this file is binary and git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text files with
mixed line endings and the undesired effect of corrupting binary
files cannot be distinguished. In both cases CRLFs are removed
in an irreversible way. For text files this is the right thing
to do because CRLFs are line endings, while for binary files
converting CRLFs corrupts data.
This patch adds a mechanism that can either warn the user about
an irreversible conversion or can even refuse to convert. The
mechanism is controlled by the variable core.safecrlf, with the
following values:
- false: disable safecrlf mechanism
- warn: warn about irreversible conversions
- true: refuse irreversible conversions
The default is to warn. Users are only affected by this default
if core.autocrlf is set. But the current default of git is to
leave core.autocrlf unset, so users will not see warnings unless
they deliberately chose to activate the autocrlf mechanism.
The safecrlf mechanism's details depend on the git command. The
general principles when safecrlf is active (not false) are:
- we warn/error out if files in the work tree can modified in an
irreversible way without giving the user a chance to backup the
original file.
- for read-only operations that do not modify files in the work tree
we do not not print annoying warnings.
There are exceptions. Even though...
- "git add" itself does not touch the files in the work tree, the
next checkout would, so the safety triggers;
- "git apply" to update a text file with a patch does touch the files
in the work tree, but the operation is about text files and CRLF
conversion is about fixing the line ending inconsistencies, so the
safety does not trigger;
- "git diff" itself does not touch the files in the work tree, it is
often run to inspect the changes you intend to next "git add". To
catch potential problems early, safety triggers.
The concept of a safety check was originally proposed in a similar
way by Linus Torvalds. Thanks to Dimitry Potapov for insisting
on getting the naked LF/autocrlf=true case right.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
The prepare-commit-msg hook is run whenever a "fresh" commit message
is prepared, just before it is shown in the editor (if it is).
Its purpose is to modify the commit message in-place.
It takes one to three parameters. The first is the name of the file that
the commit log message. The second is the source of the commit message,
and can be: "message" (if a -m or -F option was given); "template" (if a
-t option was given or the configuration option commit.template is set);
"merge" (if the commit is a merge or a .git/MERGE_MSG file exists);
"squash" (if a .git/SQUASH_MSG file exists); or "commit", followed by
a commit SHA1 as the third parameter (if a -c, -C or --amend option
was given).
If its exit status is non-zero, git-commit will abort. The hook is
not suppressed by the --no-verify option, so it should not be used
as a replacement for the pre-commit hook.
The sample prepare-commit-msg comments out the `Conflicts:` part of
a merge's commit message; other examples are commented out, including
adding a Signed-off-by line at the bottom of the commit messsage,
that the user can then edit or discard altogether.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch moves the code of run_commit, up to writing the trees, editing
the message and running the commit-msg hook to prepare_log_message. It also
renames the latter to prepare_to_commit.
This simplifies a little the code for the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pattern "foo/" in the exclude list did not match directory
"foo", but a pattern "foo" did. This attempts to extend the
exclude mechanism so that it would while not matching a regular
file or a symbolic link "foo". In order to differentiate a
directory and non directory, this passes down the type of path
being checked to excluded() function.
A downside is that the recursive directory walk may need to run
lstat(2) more often on systems whose "struct dirent" do not give
the type of the entry; earlier it did not have to do so for an
excluded path, but we now need to figure out if a path is a
directory before deciding to exclude it. This is especially bad
because an idea similar to the earlier CE_UPTODATE optimization
to reduce number of lstat(2) calls would by definition not apply
to the codepaths involved, as (1) directories will not be
registered in the index, and (2) excluded paths will not be in
the index anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An incorrect command "git mv subdir /outer/space" threw the
subdirectory to outside of the repository and then noticed that
/outer/space/subdir/ would be outside of the repository. The
error checking is backwards.
This fixes the issue by being careful about use of the return
value of get_pathspec(). Since the implementation already has
handcrafted loop to munge each path on the command line, we use
prefix_path() instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We would need to notice and fail if command line had a nonsense pathspec.
Earlier get_pathspec() returned all the inputs including bad ones, but
the new one issues warnings and removes offending ones from its return
value, so the callers need to be adjusted to notice it.
Additional test scripts were initially from Robin Rosenberg, further fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prefix_path() function called from get_pathspec() is
responsible for translating list of user-supplied pathspecs to
list of pathspecs that is relative to the root of the work
tree. When working inside a subdirectory, the user-supplied
pathspecs are taken to be relative to the current subdirectory.
Among special path components in pathspecs, we used to accept
and interpret only "." ("the directory", meaning a no-op) and
".." ("up one level") at the beginning. Everything else was
passed through as-is.
For example, if you are in Documentation/ directory of the
project, you can name Documentation/howto/maintain-git.txt as:
howto/maintain-git.txt
../Documentation/howto/maitain-git.txt
../././Documentation/howto/maitain-git.txt
but not as:
howto/./maintain-git.txt
$(pwd)/howto/maintain-git.txt
This patch updates prefix_path() in several ways:
- If the pathspec is not absolute, prefix (i.e. the current
subdirectory relative to the root of the work tree, with
terminating slash, if not empty) and the pathspec is
concatenated first and used in the next step. Otherwise,
that absolute pathspec is used in the next step.
- Then special path components "." (no-op) and ".." (up one
level) are interpreted to simplify the path. It is an error
to have too many ".." to cause the intermediate result to
step outside of the input to this step.
- If the original pathspec was not absolute, the result from
the previous step is the resulting "sanitized" pathspec.
Otherwise, the result from the previous step is still
absolute, and it is an error if it does not begin with the
directory that corresponds to the root of the work tree. The
directory is stripped away from the result and is returned.
- In any case, the resulting pathspec in the array
get_pathspec() returns omit the ones that caused errors.
With this patch, the last two examples also behave as expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new error mode allows a line to have a carriage return at the
end of the line when checking and fixing trailing whitespace errors.
Some people like to keep CRLF line ending recorded in the repository,
and still want to take advantage of the automated trailing whitespace
stripping. We still show ^M in the diff output piped to "less" to
remind them that they do have the CR at the end, but these carriage
return characters at the end are no longer flagged as errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have more than one patch series, an earlier one of which
tries to introduce whitespace breakages and a later one of which
has such a new line in its context, "git-apply --whitespace=fix"
will apply and fix the whitespace breakages in the earlier one,
making the resulting file not to match the context of the later
patch.
A short demonstration is in the new test, t4125.
For example, suppose the first patch is:
diff a/hello.txt b/hello.txt
--- a/hello.txt
+++ b/hello.txt
@@ -20,3 +20,3 @@
Hello world.$
-How Are you$
-Today?$
+How are you $
+today? $
to fix broken case in the string, but it introduces unwanted
trailing whitespaces to the result (pretend you are looking at
"cat -e" output of the patch --- '$' signs are not in the patch
but are shown to make the EOL stand out). And the second patch
is to change the wording of the greeting further:
diff a/hello.txt b/hello.txt
--- a/hello.txt
+++ b/hello.txt
@@ -18,5 +18,5 @@
Greetings $
-Hello world.$
+Hello, everybody. $
How are you $
-today? $
+these days? $
If you apply the first one with --whitespace=fix, you will get
this as the result:
Hello world.$
How are you$
today?$
and this does not match the preimage of the second patch, which
demands extra whitespace after "How are you" and "today?".
This series is about teaching "git apply --whitespace=fix" to
cope with this situation better. If the patch does not apply,
it rewrites the second patch like this and retries:
diff a/hello.txt b/hello.txt
--- a/hello.txt
+++ b/hello.txt
@@ -18,5 +18,5 @@
Greetings$
-Hello world.$
+Hello, everybody.$
How are you$
-today?$
+these days?$
This is done by rewriting the preimage lines in the hunk
(i.e. the lines that begin with ' ' or '-'), using the same
whitespace fixing rules as it is using to apply the patches, so
that it can notice what it did to the previous ones in the
series.
A careful reader may notice that the first patch in the example
did not touch the "Greetings" line, so the trailing whitespace
that is in the original preimage of the second patch is not from
the series. Is rewriting this context line a problem?
If you think about it, you will realize that the reason for the
difference is because the submitter's tree was based on an
earlier version of the file that had whitespaces wrong on that
"Greetings" line, and the change that introduced the "Greetings"
line was added independently of this two-patch series to our
tree already with an earlier "git apply --whitespace=fix".
So it may appear this logic is rewriting too much, it is not
so. It is just rewriting what we would have rewritten in the
past.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The scripted version might not have handled this correctly
either, but the version rewritten in C definitely does not grok
this and complains $tag is not a commit object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the absolute minimum (and reliable) reproduction recipe
to demonstrate that revision range in a history with clock skew
sometimes fails to mark UNINTERESTING commit in topologically
early parts of the history.
The history looks like this:
o---o---o---o
one four
but one has the largest timestamp. "git rev-list four..one"
fails to notice that "one" should not be emitted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have known breakages, we still said "passed all N
test(s)", which was a bit funny.
This rewords it to read "passed all remaining N test(s)" in such
a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only care about getting what should be an empty string and
sending it to a file, without a trailing LF, so the empty string
translates into a 0 byte file. Earlier when I originally wrote
these lines Mac OS X allowed the format string of printf to be
the empty string, but more recent versions appear to have been
'improved' with error messages if the format is not given.
This may cause problems if we ever wind up with changes to the hook
tests. A minor cleanup makes the test more safe on all systems,
by conforming to accepted printf conventions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This accompanies c5b09feb78 (Avoid
update hook during git-rebase --interactive) to make sure that
any regression to make Debian's Bug#458782 (git-core: git-rebase
doesn't work when trying to squash changes into commits created
with --no-verify) resurface will be caught.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exit value of some commands was not being used for the
test output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the upstream branch is tracked, we can detect if that branch
was rebased since it was last fetched. Teach git to use that
information to rebase from the old remote head onto the new remote head.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git histories may have multiple roots, which can cause
git merge-base to fail and this caused git cvsserver to die.
This commit teaches git cvsserver to handle a failing git
merge-base gracefully, and modifies the test case to verify this.
All the test cases now use a history with two roots.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
git-cvsserver.perl | 9 ++++++++-
t/t9400-git-cvsserver-server.sh | 10 +++++++++-
2 files changed, 17 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is preferable to have the test setup in a test case. The
setup itself may fail and having it as a test case handles this
situation more gracefully.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If options are aggregated, and that the whole token is an exact
prefix of a long option that is longer than 2 letters, reject
it. This is to prevent a common typo:
$ git commit -amend
to get interpreted as "commit all with message 'end'".
The typo check isn't performed if there is no aggregation,
because the stuck form is the recommended one. If we have `-o`
being a valid short option that takes an argument, and --option
a long one, then we _MUST_ accept -option as "'o' option with
argument 'ption'", which is our official recommended form.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test 'creating too deep nesting' can fail even when cloning the repos,
but is not its main purpose (it has to prepare nested repos and ensure
the last one is invalid). So split the test into the creation and
invalidity checking parts.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently use lower 12-bit (masked with CE_NAMEMASK) in the
ce_flags field to store the length of the name in cache_entry,
without checking the length parameter given to
create_ce_flags(). This can make us store incorrect length.
Currently we are mostly protected by the fact that many
codepaths first copy the path in a variable of size PATH_MAX,
which typically is 4096 that happens to match the limit, but
that feels like a bug waiting to happen. Besides, that would
not allow us to shorten the width of CE_NAMEMASK to use the bits
for new flags.
This redefines the meaning of the name length stored in the
cache_entry. A name that does not fit is represented by storing
CE_NAMEMASK in the field, and the actual length needs to be
computed by actually counting the bytes in the name[] field.
This way, only the unusually long paths need to suffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This modifies the existing t7400 test to use 'init' as the
pathname that a submodule is bound to. Without the earlier
subcommand parser fix, this fails.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are now sanity-checking the contents of patches and
refusing to send ones with long lines, this knob provides a
way for the user to override the new behavior (if, e.g., he
knows his SMTP path will handle it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to catch errors early so that we don't end up sending
half of a broken patch series. Right now the only validation
is checking that line-lengths are under the SMTP-mandated
limit of 998.
The validation parsing is very crude (it just checks each
line length without understanding the mailbox format) but
should work fine for this simple check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes write_ref_sha1() more careful: it actually checks the SHA1 of
the ref it is updating, and refuses to update a ref with an object that it
cannot find.
Perhaps more importantly, it also refuses to update a branch head with a
non-commit object. I don't quite know *how* the stable series maintainers
were able to corrupt their repository to have a HEAD that pointed to a tag
rather than a commit object, but they did. Which results in a totally
broken repository that cannot be cloned or committed on.
So make it harder for people to shoot themselves in the foot like that.
The test t1400-update-ref.sh is fixed at the same time, as it
assumed that the commands involved in the particular test would
not care about corrupted repositories whose refs point at
nonexistant bogus objects. That assumption does not hold true
anymore.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We truncate hunk-header line at 80 bytes, but that 80th byte
could be in the middle of a character, which is bad. This uses
pick_one_utf8_char() function to make sure we do not cut a character
in the middle.
This assumes that the internal representation of the text is
UTF-8. This needs to be extended in the future but the optimal
direction has not been decided yet.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When e-mail address is empty (e.g. "A U Thor <>"), --pretty=format
misparsed the commit header and did not pick up the date field correctly.
Noticed by Marco, fixed slightly differently with additional sanity
check and with a test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good practice to write program output to a temporary file
during the test, as it would allow easier postmortem when the tested
program does break. But there is no benefit in writing the expected
output out to the temporary.
This actually fixes a bug in check_verify_failure() routine.
The intention of the test seems to make sure the "git mktag" command
fails, and it spits out the expected error message. But if the
command did not fail as expected, the shell function as originally
written would not have detected the failure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is nothing _wrong_ with egrep per se, but this way we
would have less dependency on external tools.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As pointed out by Junio, it's unnecessary to use "grep -E" and ".+" when we can
just use "grep" and "..*".
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense since there is no working tree. A soft
reset should be fine, though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config parsing routines use the static global
'config_file' to store the FILE* pointing to the current
config file being parsed. The function get_next_char()
automatically converts an EOF on this file to a newline for
the convenience of its callers, and it sets config_file to
NULL to indicate that EOF was reached.
This throws away useful information, though, since some
routines want to call ftell on 'config_file' to find out
exactly _where_ the routine ended. In the case of a key
ending at EOF boundary, we ended up segfaulting in some
cases (changing that key or adding another key in its
section), or failing to provide the necessary newline
(adding a new section).
This patch adds a new flag to indicate EOF and uses that
instead of setting config_file to NULL. It also makes sure
to add newlines where necessary for truncated input. All
three included tests fail without the patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/commit-cleanup:
Allow selection of different cleanup modes for commit messages
builtin-commit: avoid double-negation in the code.
builtin-commit: fix amending of the initial commit
t7005: do not exit inside test.
In commit b7bb760d5e (Fix revision
log diff setup, avoid unnecessary diff generation) an optimization was
made to avoid unnecessary diff generation. This was partly fixed in
99516e35d0 (Fix embarrassing "git log
--follow" bug). The '--diff-filter' option also needs the diff machinery
in action.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a config file has become mildly corrupted due to a missing LF
we may discover some other option joined up against the end of a
numeric value. For example:
[section]
number = 1auto
where the "auto" flag was meant to occur on the next line, below
"number", but the missing LF has caused it to no longer be its
own option. Instead the word "auto" is parsed as a 'unit factor'
for the value of "number".
Before this change we got the confusing error message:
fatal: unknown unit: 'auto'
which told us nothing about where the problem appeared. Now we get:
fatal: bad config value for 'aninvalid.unit'
which at least points the user in the right direction of where to
search for the incorrectly formatted configuration file.
Noticed by erikh on #git, which received the original error from
a simple `git checkout -b` due to a midly corrupted config.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although we traditionally stripped away excess blank lines, trailing
whitespaces and lines that begin with "#" from the commit log message,
sometimes the message just has to be the way user wants it.
For instance, a commit message template can contain lines that begin with
"#", the message must be kept as close to its original source as possible
if you are converting from a foreign SCM, or maybe the message has a shell
script including its comments for future reference.
The cleanup modes are default, verbatim, whitespace and strip. The
default mode depends on if the message is being edited and will either
strip whitespace and comments (if editor active) or just strip the
whitespace (for where the message is given explicitely).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command itself takes an optional <pattern> argument that
limits the shown tags to the ones that match when in listing
mode that is triggered with '-l' option. The <pattern> is not
an optional option-argument to '-l'.
With this fix, "git tag -l -n 4 v0.99" works as expected.
It also removes a few bogus tests in t7004.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier test stripped away expected number of 'z' but the output
would have been very hard to read once somebody broke the common tail
optimization. Instead, count the number of 'z' and show it, to help
diagnosing the problem better in the future.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tests a recently fixed regression in which "git clone
-o" didn't work at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 376ccb8cbb (rebase -i: style
fixes and minor cleanups), unchanged SHA-1s are no longer mapped via
$REWRITTEN. But the updating phase was not prepared for the old head
not being rewritten.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of 'tr' only accept octal codes if entered with three digits,
and therefor misinterpret the '\0' in the test suite.
Some versions of 'tr' reject the (needless) use of character classes.
Signed-off-by: H.Merijn Brand <h.m.brand@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to be extra careful recovering the removed common section, so
that we do not break context nor the changed incomplete line (i.e. the
last line that does not end with LF).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After this patch, "written" counts the number of bytes up to and
including the most recently seen tab. This allows us to detect (and
count) spaces by comparing to "i".
This allows catching initial indents like '\t ' (a tab followed
by 8 spaces), while previously indent-with-non-tab caught only indents
that consisted entirely of spaces.
This also allows fixing an indent-with-non-tab regression, so we can
again detect indents like '\t \t'.
Also update tests to catch these cases.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there were no tabs, and the last space was at position 7, then
positions 0..7 had spaces, so there were 8 spaces.
Update test to check exactly this case.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is important for the list of clone urls, where if there are
no per-repository clone URL configured, the default base URLs
are never used for URL construction without this patch.
Add tests for different ways of setting project URLs, just in case.
Note that those tests in current form wouldn't detect breakage fixed
by this patch, as it only checks for errors and not for expected
output.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wc/diff:
Test interaction between diff --check and --exit-code
Use shorter error messages for whitespace problems
Add tests for "git diff --check" with core.whitespace options
Make "diff --check" output match "git apply"
Unify whitespace checking
diff --check: minor fixups
"diff --check" should affect exit status
Make sure that it works as advertised in the man page.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The initial version of the whitespace_error_string() function took the
messages from builtin-apply.c rather than the shorter messages from
diff.c.
This commit addresses Junio's concern that these messages might be too
long (now that we can emit multiple warnings per line).
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After tentatively applying a patch from a contributor, you can get a
replacement patch with corrected code and unusable commit log message.
In such a case, this sequence ought to give you an editor based on the
message in the earlier commit, to let you describe an incremental
improvement:
git reset --hard HEAD^ ;# discard the earlier one
git am <corrected-patch
git commit --amend -c HEAD@{1}
Unfortunately, --amend insisted reusing the message from the commit
being amended, ignoring the -c option. This corrects it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git-svn would ignore cases where the path we're
tracking is removed from the repository. This was to prevent
heads with follow-parent from ending up with a tree full of
empty revisions (and thus breaking rename detection).
The previous behavior is fine until the path we're tracking
is re-added later on, leading to the old files being merged
in with the new files in the directory (because the old
files were never marked as deleted)
We will now only remove all the old files locally that were
deleted remotely iff we detect the directory we're in is being
created from scratch.
Thanks for Marcus D. Hanwell for the bug report and
Peter Baumann for the analysis.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that "git diff --check" does the right thing when the
core.whitespace options are set.
While we are at it, correct many uses of test_expect_failure that
ran sequence of commands.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit unifies three separate places where whitespace checking was
performed:
- the whitespace checking previously done in builtin-apply.c is
extracted into a function in ws.c
- the equivalent logic in "git diff" is removed
- the emit_line_with_ws() function is also removed because that also
rechecks the whitespace, and its functionality is rolled into ws.c
The new function is called check_and_emit_line() and it does two things:
checks a line for whitespace errors and optionally emits it. The checking
is based on lines of content rather than patch lines (in other words, the
caller must strip the leading "+" or "-"); this was suggested by Junio on
the mailing list to allow for a future extension to "git show" to display
whitespace errors in blobs.
At the same time we teach it to report all classes of whitespace errors
found for a given line rather than reporting only the first found error.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason --exit-code and --check-diff must be mutually
exclusive, so assign different bits to different results and allow them
to be returned from the command. Introduce diff_result_code() to factor
out the common code to decide final status code based on diffopt
settings and use it everywhere.
Update tests to match the above fix.
Turning pager off when "diff --check" is used is a regression.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff" has a --check option that can be used to check for whitespace
problems but it only reported by printing warnings to the
console.
Now when the --check option is used we give a non-zero exit status,
making "git diff --check" nicer to use in scripts and hooks.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"diff --check" would only detect spaces before tabs if a tab was the
last character in the leading indent. Fix that and add a test case to
make sure the bug doesn't regress in the future.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 3968658599 broke signed tags using
the "-u" flag when it made builtin-tag.c use parse_options() to parse its
arguments (but it quite possibly was broken even before that, by the
builtin rewrite).
It used to be that passing the signing ID with the -u parameter also
(obviously!) implied that you wanted to sign and annotate the tag, but
that logic got dropped. It also totally ignored the actual key ID that was
passed in.
This reinstates it all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Migrations are done automatically on an as-needed basis when new
revisions are to be fetched. Stale remote branches do not get
migrated, yet.
However, unless you set noMetadata or useSvkProps it's safe to
just do:
find $GIT_DIR/svn -name '.rev_db*' -print0 | xargs rm -f
to purge all the old .rev_db files.
The new format is a one-way migration and is NOT compatible with
old versions of git-svn.
This is the replacement for the rev_db format, which was too big
and inefficient for large repositories with a lot of sparse history
(mainly tags).
The format is this:
- 24 bytes for every record,
* 4 bytes for the integer representing an SVN revision number
* 20 bytes representing the sha1 of a git commit
- No empty padding records like the old format
- new records are written append-only since SVN revision numbers
increase monotonically
- lookups on SVN revision number are done via a binary search
- Piping the file to xxd(1) -c24 is a good way of dumping it for
viewing or editing, should the need ever arise.
As with .rev_db, these files are disposable unless noMetadata or
useSvmProps is set.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have local changes that don't conflict with the
branch-switching changes, these should be kept, not cause errors even
without -m, and be reported afterwards in name-status format.
With -m, the changes carried across should be listed as well. And, for
now, include the merge-recursive output from this process.
Also test the detatched head message in at least one case.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As pointed out by Junio on the mailing list, surrounding tests in
double quotes can lead to bugs wherein variables get substituted away,
so this isn't just style churn but important to prevent others from
looking at these tests in the future and thinking that this is "the
way" that Git tests should be written.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Supplement the existing tests for the commit-msg hook (which all use
"git commit -m") with tests which use an interactive editor (no -m
switch) to ensure that all code paths get tested.
At the same time the quoting of some of the existing tests is changed
to conform to Junio's recommendations for test style (single quotes
used around the test unless there is a compelling reason not to, and
the opening quote on the same line as the test_expect and the closing
quote in column 1).
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/spht:
Use gitattributes to define per-path whitespace rule
core.whitespace: documentation updates.
builtin-apply: teach whitespace_rules
builtin-apply: rename "whitespace" variables and fix styles
core.whitespace: add test for diff whitespace error highlighting
git-diff: complain about >=8 consecutive spaces in initial indent
War on whitespace: first, a bit of retreat.
Conflicts:
cache.h
config.c
diff.c
As desired, these pass for git-commit.sh, fail for builtin-commit (prior
to the fixes), and succeeded for builtin-commit (after the fixes).
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of git-status was recently changed to output relative
paths. Setting this variable to false restores the old behavior for
any old-timers that prefer it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for-each-ref can accept only one quoting style. For this reason it uses
OPT_BIT for the quoting style switches so that it is easy to check for
more than one bit being set. However, not all symbolic constants were
actually single bit values. In particular:
$ git for-each-ref --python
error: more than one quoting style ?
This fixes it.
While we are here, let's also remove the space before the question mark.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `core.whitespace` configuration variable allows you to define what
`diff` and `apply` should consider whitespace errors for all paths in
the project (See gitlink:git-config[1]). This attribute gives you finer
control per path.
For example, if you have these in the .gitattributes:
frotz whitespace
nitfol -whitespace
xyzzy whitespace=-trailing
all types of whitespace problems known to git are noticed in path 'frotz'
(i.e. diff shows them in diff.whitespace color, and apply warns about
them), no whitespace problem is noticed in path 'nitfol', and the
default types of whitespace problems except "trailing whitespace" are
noticed for path 'xyzzy'. A project with mixed Python and C might want
to have:
*.c whitespace
*.py whitespace=-indent-with-non-tab
in its toplevel .gitattributes file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-am -i: report rewritten title
git grep shows the same hit repeatedly for unmerged paths
Do check_repository_format() early (re-fix)
Do check_repository_format() early
Add missing inside_work_tree setting in setup_git_directory_gently
* nd/maint-work-tree-fix:
Do check_repository_format() early (re-fix)
Do check_repository_format() early
Add missing inside_work_tree setting in setup_git_directory_gently
This pushes check_repository_format() (actually _gently() version)
to setup_git_directory_gently() in order to prevent from
using unsupported repositories.
New setup_git_directory_gently()'s behaviour is stop searching
for a valid gitdir and return as if there is no gitdir if a
unsupported repository is found. Warning will be thrown in these
cases.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pull/fetch" that gets explicit refspecs from the command line should
not update configured tracking refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
* sp/refspec-match:
refactor fetch's ref matching to use refname_match()
push: use same rules as git-rev-parse to resolve refspecs
add refname_match()
push: support pushing HEAD to real branch name
POSIX says that exit status "0" means that "unset" successfully unset
the variable. However, it is kind of ambiguous if an environment
variable which was not set could be successfully unset.
At least the default shell on HP-UX insists on reporting an error in
such a case, so just ignore the exit status of "unset".
[Dscho: extended the patch to git-submodule.sh, as Junio realized that
this is the only other place where we check the exit status of "unset".]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsimport won't run at all with less than cvsps 2.1, because it
lacks the -A flag. But there's no point in preventing people who have an
old cvsps from running the full testsuite.
Tested-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name 'verbatim' describes much better what this mode does with
signed tags. While at it, fix the documentation what it actually
does.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not usually make sense to record a commit that has the exact
same tree as its sole parent commit and that is why git-commit prevents
you from making such a mistake, but when data from foreign scm is
involved, it is a different story. We are equipped to represent such an
(perhaps insane, perhaps by mistake, or perhaps done on purpose) empty
change, and it is better to represent it bypassing the safety valve for
native use.
This is primarily for use by foreign scm interface scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally, it should not be allowed to generate an empty commit. A merge
commit generated with git 'merge -s ours' does not change the tree (along
the first parent), but merges are not "empty" even if they do not change
the tree. Hence, commit 8588452ceb allowed to amend a merge commit that
does not change the tree, but 4fb5fd5d30 disallowed it again in an
attempt to avoid that an existing commit is amended such that it becomes
empty. With this change, a commit can be edited (create a new one or amend
an existing one) either if there are changes or if there are at least two
parents.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code tries to collapse identical leading components
between the prefix and the path. So if we're in "dir1", the
path "dir1/file" should become just "file". However, we were
ending up with "../dir1/file". The included test expected
the wrong output.
The "len" parameter to quote_path can be negative to mean
"this is a NUL terminated string". Simply count it so that
the loop can rely on it being the length of the path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This program dumps (parts of) a git repository in the format that
fast-import understands.
For clarity's sake, it does not use the 'inline' method of specifying
blobs in the commits, but builds the blobs before building the commits.
Since signed tags' signatures will not necessarily be valid (think
transformations after the export, or excluding revisions, changing
the history), there are 4 modes to handle them: abort (default),
ignore, warn and strip. The latter just turns the tags into
unsigned ones.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we consider if a path has been totally rewritten, we did not
touch changes from symlinks to files or vice versa. But a change
that modifies even the type of a blob surely should count as a
complete rewrite.
While we are at it, modernise diffcore-break to be aware of gitlinks (we
do not want to touch them).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag-options:
git-tag: test that -s implies an annotated tag
"git-tag -s" should create a signed annotated tag
builtin-tag: accept and process multiple -m just like git-commit
Make builtin-tag.c use parse_options.
* maint:
Replace the word 'update-cache' by 'update-index' everywhere
cvsimport: fix usage of cvsimport.module
t7003-filter-branch: Fix test of a failing --msg-filter.
cvsimport: miscellaneous packed-ref fixes
cvsimport: use rev-parse to support packed refs
Add basic cvsimport tests
Earlier, 'git prune' would prune all loose unreachable objects.
This could be quite dangerous, as the objects could be used in
an ongoing operation.
This patch adds a mode to expire only loose, unreachable objects
which are older than a certain time. For example, by
git prune --expire 14.days
you can prune only those objects which are loose, unreachable
and older than 14 days (and thus probably outdated).
The implementation uses st.st_mtime rather than st.st_ctime,
because it can be tested better, using 'touch -d <time>' (and
omitting the test when the platform does not support that
command line switch).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were two problems:
1. We only look at the config variable if there is no module
given on the command line. We checked this by comparing
@ARGV == 0. However, at the time of the comparison, we
have not yet parsed the dashed options, meaning that
"git cvsimport" would read the variable but "git
cvsimport -a" would not. This is fixed by simply moving
the check after the call to getopt.
2. If the config variable did not exist, we were adding an
empty string to @ARGV. The rest of the script, rather
than barfing for insufficient input, would then try to
import the module '', leading to rather confusing error
messages. Based on patch from Emanuele Giaquinta.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Occasionally, in some setups (*cough* forks on repo.or.cz *cough*) some
refs go stale, e.g. when the forkee rebased and lost some objects needed
by the fork. The quick & dirty way to deal with those refs is to delete
them and push them again.
However, git-push first would first fetch the current commit name for the
ref, would receive a null sha1 since the ref does not point to a valid
object, then tell receive-pack that it should delete the ref with this
commit name. delete_ref() would be subsequently be called, and check that
resolve_ref() (which does _not_ check for validity of the object) returns
the same commit name. Which would fail.
The proper fix is to avoid corrupting repositories, but in the meantime
this is a good fix in any case.
Incidentally, some instances of "cd .." in the test cases were fixed, so
that subsequent test cases run in t/trash/ irrespective of the outcome of
the previous test cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test passed for the wrong reason: If the script given to --msg-filter
fails, it is expected that git-filter-branch aborts. But the test forgot
to tell the branch name to rewrite, and so git-filter-branch failed due to
incorrect usage.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling 'git pull' with the '--rebase' option, it performs a
fetch + rebase instead of a fetch + merge.
This behavior is more desirable than fetch + pull when a topic branch
is ready to be submitted and needs to be update.
fetch + rebase might also be considered a better workflow with shared
repositories in any case, or for contributors to a centrally managed
repository, such as WINE's.
As a convenience, you can set the default behavior for a branch by
defining the config variable branch.<name>.rebase, which is
interpreted as a bool. This setting can be overridden on the command
line by --rebase and --no-rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 09fba7a59d.
These tests are superseded by the ones in t5404 (added in
6fa92bf3 and 8736a848), which are more extensive and better
organized.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if refs were packed, git-cvsimport would assume
that particular refs did not exist. This could lead to, for
example, overwriting previous 'origin' commits that were
packed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We weren't even testing basic things before, so let's at
least try importing and updating a trivial repository, which
will catch total breakage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This detects a regression introduced while moving git-tag to a C
builtin.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
* jc/maint-format-patch-encoding:
test format-patch -s: make sure MIME content type is shown as needed
format-patch -s: add MIME encoding header if signer's name requires so
* bs/maint-commit-options:
git-commit: Add tests for invalid usage of -a/--interactive with paths
git-commit.sh: Fix usage checks regarding paths given when they do not make sense
We earlier introduced core.whitespace to allow users to tweak the
definition of what the "whitespace errors" are, for the purpose of diff
output highlighting. This teaches the same to git-apply, so that the
command can both detect (when --whitespace=warn option is given) and fix
(when --whitespace=fix option is given) as configured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
* js/mingw-fallouts:
fetch-pack: Prepare for a side-band demultiplexer in a thread.
rehabilitate some t5302 tests on 32-bit off_t machines
Allow ETC_GITCONFIG to be a relative path.
Introduce git_etc_gitconfig() that encapsulates access of ETC_GITCONFIG.
Allow a relative builtin template directory.
Close files opened by lock_file() before unlinking.
builtin run_command: do not exit with -1.
Move #include <sys/select.h> and <sys/ioctl.h> to git-compat-util.h.
Use is_absolute_path() in sha1_file.c.
Skip t3902-quoted.sh if the file system does not support funny names.
t5302-pack-index: Skip tests of 64-bit offsets if necessary.
t7501-commit.sh: Not all seds understand option -i
t5300-pack-object.sh: Split the big verify-pack test into smaller parts.
* cc/bisect:
Bisect reset: do nothing when not bisecting.
Bisect: use "$GIT_DIR/BISECT_NAMES" to check if we are bisecting.
Bisect visualize: use "for-each-ref" to list all good refs.
git-bisect: modernize branch shuffling hack
git-bisect: use update-ref to mark good/bad commits
git-bisect: war on "sed"
Bisect reset: remove bisect refs that may have been packed.
We no longer have "runstatus", but running "status" is no longer that
expensive anyway; it is a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
