The "--decorate-refs" and "--decorate-refs-exclude" options "git
log" takes have learned a companion configuration variable
log.excludeDecoration that sits at the lowest priority in the
family.
* ds/log-exclude-decoration-config:
log: add log.excludeDecoration config option
log-tree: make ref_filter_match() a helper method
In 'git log', the --decorate-refs-exclude option appends a pattern
to a string_list. This list is used to prevent showing some refs
in the decoration output, or even by --simplify-by-decoration.
Users may want to use their refs space to store utility refs that
should not appear in the decoration output. For example, Scalar [1]
runs a background fetch but places the "new" refs inside the
refs/scalar/hidden/<remote>/* refspace instead of refs/<remote>/*
to avoid updating remote refs when the user is not looking. However,
these "hidden" refs appear during regular 'git log' queries.
A similar idea to use "hidden" refs is under consideration for core
Git [2].
Add the 'log.excludeDecoration' config option so users can exclude
some refs from decorations by default instead of needing to use
--decorate-refs-exclude manually. The config value is multi-valued
much like the command-line option. The documentation is careful to
point out that the config value can be overridden by the
--decorate-refs option, even though --decorate-refs-exclude would
always "win" over --decorate-refs.
Since the 'log.excludeDecoration' takes lower precedence to
--decorate-refs, and --decorate-refs-exclude takes higher
precedence, the struct decoration_filter needed another field.
This led also to new logic in load_ref_decorations() and
ref_filter_match().
There are several tests in t4202-log.sh that test the
--decorate-refs-(include|exclude) options, so these are extended.
Since the expected output is already stored as a file, most tests
could simply replace a "--decorate-refs-exclude" option with an
in-line config setting. Other tests involve the precedence of
the config option compared to command-line options and needed more
modification.
[1] https://github.com/microsoft/scalar
[2] https://lore.kernel.org/git/77b1da5d3063a2404cd750adfe3bb8be9b6c497d.1585946894.git.gitgitgadget@gmail.com/
Helped-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_filter_match() method is defined in refs.h and implemented
in refs.c, but is only used by add_ref_decoration() in log-tree.c.
Move it into that file as a static helper method. The
match_ref_pattern() comes along for the ride.
While moving the code, also make a slight adjustment to have
ref_filter_match() take a struct decoration_filter pointer instead
of multiple string lists. This is non-functional, but will make a
later change be much cleaner.
The diff is easier to parse when using the --color-moved option.
Reported-by: Junio C Hamano <gister@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit subjects or authors have non-ASCII characters, git
format-patch Q-encodes them so they can be safely sent over email.
However, if the patch transfer method is something other than email (web
review tools, sneakernet), this only serves to make the patch metadata
harder to read without first applying it (unless you can decode RFC 2047
in your head). git am as well as some email software supports
non-Q-encoded mail as described in RFC 6531.
Add --[no-]encode-email-headers and format.encodeEmailHeaders to let the
user control this behavior.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to interface with GnuPG has been refactored.
* hi/gpg-prefer-check-signature:
gpg-interface: prefer check_signature() for GPG verification
t: increase test coverage of signature verification output
This commit refactors the use of verify_signed_buffer() outside of
gpg-interface.c to use check_signature() instead. It also turns
verify_signed_buffer() into a file-local function since it's now only
invoked internally by check_signature().
There were previously two globally scoped functions used in different
parts of Git to perform GPG signature verification:
verify_signed_buffer() and check_signature(). Now only
check_signature() is used.
The verify_signed_buffer() function doesn't guard against duplicate
signatures as described by Michał Górny [1]. Instead it only ensures a
non-erroneous exit code from GPG and the presence of at least one
GOODSIG status field. This stands in contrast with check_signature()
that returns an error if more than one signature is encountered.
The lower degree of verification makes the use of verify_signed_buffer()
problematic if callers don't parse and validate the various parts of the
GPG status message themselves. And processing these messages seems like
a task that should be reserved to gpg-interface.c with the function
check_signature().
Furthermore, the use of verify_signed_buffer() makes it difficult to
introduce new functionality that relies on the content of the GPG status
lines.
Now all operations that does signature verification share a single entry
point to gpg-interface.c. This makes it easier to propagate changed or
additional functionality in GPG signature verification to all parts of
Git, without having odd edge-cases that don't perform the same degree of
verification.
[1] https://dev.gentoo.org/~mgorny/articles/attack-on-git-signature-verification.html
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show" and others gave an object name in raw format in its
error output, which has been corrected to give it in hex.
* hd/show-one-mergetag-fix:
show_one_mergetag: print non-parent in hex form.
"git merge signed-tag" while lacking the public key started to say
"No signature", which was utterly wrong. This regression has been
reverted.
* hi/gpg-use-check-signature:
Revert "gpg-interface: prefer check_signature() for GPG verification"
When a mergetag names a non-parent, which can occur after a shallow
clone, its hash was previously printed as raw data. Print it in hex form
instead.
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 72b006f4bf, which
breaks the end-user experience when merging a signed tag without
having the public key. We should report "can't check because we
have no public key", but the code with this change claimed that
there was no signature.
Allow hash_object_file() to work on arbitrary repos by introducing a
git_hash_algo parameter. Change callers which have a struct repository
pointer in their scope to pass on the git_hash_algo from the said repo.
For all other callers, pass on the_hash_algo, which was already being
used internally at hash_object_file(). This functionality will be used
in the following patch to make check_object_signature() be able to work
on arbitrary repos (which, in turn, will be used to fix an
inconsistency at object.c:parse_object()).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hide lower-level verify_signed-buffer() API as a pure helper to
implement the public check_signature() function, in order to
encourage new callers to use the correct and more strict
validation.
* hi/gpg-use-check-signature:
gpg-interface: prefer check_signature() for GPG verification
This commit refactors the use of verify_signed_buffer() outside of
gpg-interface.c to use check_signature() instead. It also turns
verify_signed_buffer() into a file-local function since it's now only
invoked internally by check_signature().
There were previously two globally scoped functions used in different
parts of Git to perform GPG signature verification:
verify_signed_buffer() and check_signature(). Now only
check_signature() is used.
The verify_signed_buffer() function doesn't guard against duplicate
signatures as described by Michał Górny [1]. Instead it only ensures a
non-erroneous exit code from GPG and the presence of at least one
GOODSIG status field. This stands in contrast with check_signature()
that returns an error if more than one signature is encountered.
The lower degree of verification makes the use of verify_signed_buffer()
problematic if callers don't parse and validate the various parts of the
GPG status message themselves. And processing these messages seems like
a task that should be reserved to gpg-interface.c with the function
check_signature().
Furthermore, the use of verify_signed_buffer() makes it difficult to
introduce new functionality that relies on the content of the GPG status
lines.
Now all operations that does signature verification share a single entry
point to gpg-interface.c. This makes it easier to propagate changed or
additional functionality in GPG signature verification to all parts of
Git, without having odd edge-cases that don't perform the same degree of
verification.
[1] https://dev.gentoo.org/~mgorny/articles/attack-on-git-signature-verification.html
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit being range-diff'd has a note attached to it, the note
will be compared as well. However, if a user has multiple notes refs or
if they want to suppress notes from being printed, there is currently no
way to do this.
Pass through `--[no-]notes[=<ref>]` to the `git log` call so that this
option is customizable.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --decorate-refs-exclude=<pattern>" was incorrectly
overruled when the "--simplify-by-decoration" option is used, which
has been corrected.
* rs/simplify-by-deco-with-deco-refs-exclude:
log-tree: call load_ref_decorations() in get_name_decoration()
log: test --decorate-refs-exclude with --simplify-by-decoration
Load a default set of ref name decorations at the first lookup. This
frees direct and indirect callers from doing so. They can still do it
if they want to use a filter or are interested in full decorations
instead of the default short ones -- the first load_ref_decorations()
call wins.
This means that the load in builtin/log.c::cmd_log_init_finish() is
respected even if --simplify-by-decoration is given, as the previously
dominating earlier load in handle_revision_opt() is gone. So a filter
given with --decorate-refs-exclude is used for simplification in that
case, as expected.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_detach() has been returning a pointer to a buffer even for empty
strbufs since 08ad56f3f0 ("strbuf: always return a non-NULL value from
strbuf_detach", 2012-10-18). Use that feature in show_log() instead of
having it handle empty strbufs specially.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Four new configuration variables {author,committer}.{name,email}
have been introduced to override user.{name,email} in more specific
cases.
* wh/author-committer-ident-config:
config: allow giving separate author and committer idents
The author.email, author.name, committer.email and committer.name
settings are analogous to the GIT_AUTHOR_* and GIT_COMMITTER_*
environment variables, but for the git config system. This allows them
to be set separately for each repository.
Git supports setting different authorship and committer
information with environment variables. However, environment variables
are set in the shell, so if different authorship and committer
information is needed for different repositories an external tool is
required.
This adds support to git config for author.email, author.name,
committer.email and committer.name settings so this information
can be set per repository.
Also, it generalizes the fmt_ident function so it can handle author vs
committer identification.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to write for example
git log --format="%H,%S"
where the %S at the end is a new placeholder that prints out the ref
(tag/branch) for each commit.
Using %d might seem like an alternative but it only shows the ref for the last
commit in the branch.
Signed-off-by: Issac Trotts <issactrotts@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d8981c3f88 ("format-patch: do not let its diff-options affect
--range-diff", 2018-11-30) taught `show_range_diff()` to accept a
NULL-pointer as an indication that it should use its own "reasonable
default". That fixed a regression from a5170794 ("Merge branch
'ab/range-diff-no-patch'", 2018-11-18), but unfortunately it introduced
a regression of its own.
In particular, it means we forget the `file` member of the diff options,
so rather than placing a range-diff in the cover-letter, we write it to
stdout. In order to fix this, rewrite the two callers adjusted by
d8981c3f88 to instead create a "dummy" set of diff options where they
only fill in the fields we absolutely require, such as output file and
color.
Modify and extend the existing tests to try and verify that the right
contents end up in the right place.
Don't revert `show_range_diff()`, i.e., let it keep accepting NULL.
Rather than removing what is dead code and figuring out it isn't
actually dead and we've broken 2.20, just leave it for now.
[es: retain diff coloring when going to stdout]
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop leaking how the primary output of format-patch is customized to
the range-diff machinery and instead let the latter use its own
"reasonable default", in order to correct the breakage introduced by
a5170794 ("Merge branch 'ab/range-diff-no-patch'", 2018-11-18) on
the 'master' front. "git format-patch --range-diff..." without any
weird diff option started to include the "range-diff --stat" output,
which is rather useless right now, that made the whole thing
unusable and this is probably the least disruptive way to whip the
codebase into a shippable shape.
We may want to later make the range-diff driven by format-patch more
configurable, but that would have to wait until we have a good
design.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new configuration variable core.usereplacerefs has been added,
primarily to help server installations that want to ignore the
replace mechanism altogether.
* jk/core-use-replace-refs:
add core.usereplacerefs config option
check_replace_refs: rename to read_replace_refs
check_replace_refs: fix outdated comment
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of a range-diff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert a range-diff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --range-diff=<refspec>" to insert a
range-diff into the commentary section of a lone patch rather than
requiring a cover letter.
Implementation note: Generating a range-diff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the range-diff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
When submitting a revised version of a patch or series, it can be
helpful (to reviewers) to include a summary of changes since the
previous attempt in the form of an interdiff, typically in the cover
letter. However, it is occasionally useful, despite making for a noisy
read, to insert an interdiff into the commentary section of the lone
patch of a 1-patch series.
Therefore, extend "git format-patch --interdiff=<prev>" to insert an
interdiff into the commentary section of a lone patch rather than
requiring a cover letter. The interdiff is indented to avoid confusing
git-am and human readers into considering it part of the patch proper.
Implementation note: Generating an interdiff for insertion into the
commentary section of a patch which itself is currently being generated
requires invoking the diffing machinery recursively. However, the
machinery does not (presently) support this since it uses global state.
Consequently, we need to take care to stash away the state of the
in-progress operation while generating the interdiff, and restore it
after.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In patches generated by git-format-patch, the area below the "---" line
following the commit message and before the actual 'diff' can be used
for commentary which the patch author wants to convey to readers of the
patch itself but not include in the commit message proper.
By default, the commentary area is empty, however, the --notes option
causes it to be populated with notes associated with the commit. In the
future, other options may be added which also insert content into the
commentary section.
To accommodate this, factor out the logic which delimits commentary
blocks from the commit message so that it can be re-used for upcoming
optional inserted content.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was added as a NEEDSWORK in c3c36d7de2 (replace-object:
check_replace_refs is safe in multi repo environment, 2018-04-11),
waiting for a calmer period. Since doing so now doesn't conflict
with anything in 'pu', it seems as good a time as any.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
Add a repository argument to allow the callers of parse_tag_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of lookup_tag
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Continuing with the idea to programatically enumerate various
pieces of data required for command line completion, teach the
codebase to report the list of configuration variables
subcommands care about to help complete them.
* nd/complete-config-vars:
completion: complete general config vars in two steps
log-tree: allow to customize 'grafted' color
completion: support case-insensitive config vars
completion: keep other config var completion in camelCase
completion: drop the hard coded list of config vars
am: move advice.amWorkDir parsing back to advice.c
advice: keep config name in camelCase in advice_config[]
fsck: produce camelCase config key names
help: add --config to list all available config
fsck: factor out msg_id_info[] lazy initialization code
grep: keep all colors in an array
Add and use generic name->id mapping code for color slot parsing
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
Avoid unchecked snprintf() to make future code auditing easier.
* jk/snprintf-truncation:
fmt_with_err: add a comment that truncation is OK
shorten_unambiguous_ref: use xsnprintf
fsmonitor: use internal argv_array of struct child_process
log_write_email_headers: use strbufs
http: use strbufs instead of fixed buffers
Commit 76f5df305b (log: decorate grafted commits with "grafted" -
2011-08-18) lets us decorate grafted commits but I forgot about the
color.decorate.* config.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it helps to list all available config vars so the user can
search for something they want. The config man page can also be used
but it's harder to search if you want to focus on the variable name,
for example.
This is not the best way to collect the available config since it's
not precise. Ideally we should have a centralized list of config in C
code (pretty much like 'struct option'), but that's a lot more work.
This will do for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of hard coding the name-to-id mapping in C code, keep it in an
array and use a common function to do the parsing. This reduces code
and also allows us to list all possible color slots later.
This starts using C99 designated initializers more for convenience
(the first designated initializers have been introduced in builtin/clean.c
for some time without complaints)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch --cover --attach" created a broken MIME multipart
message for the cover letter, which has been fixed by keeping the
cover letter as plain text file.
* bc/format-patch-cover-no-attach:
format-patch: make cover letters always text/plain
The functionality of "$GIT_DIR/info/grafts" has been superseded by
the "refs/replace/" mechanism for some time now, but the internal
code had support for it in many places, which has been cleaned up
in order to drop support of the "grafts" mechanism.
* js/deprecate-grafts:
Remove obsolete script to convert grafts to replace refs
technical/shallow: describe why shallow cannot use replace refs
technical/shallow: stop referring to grafts
filter-branch: stop suggesting to use grafts
Deprecate support for .git/info/grafts
Add a test for `git replace --convert-graft-file`
replace: introduce --convert-graft-file
replace: prepare create_graft() for converting graft files wholesale
replace: "libify" create_graft() and callees
replace: avoid using die() to indicate a bug
commit: Let the callback of for_each_mergetag return on error
argv_array: offer to split a string by whitespace
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
