"git log -S/-G" started paying attention to textconv filter, but
there was no way to disable this. Make it honor --no-textconv
option.
* sr/log-SG-no-textconv:
diffcore-pickaxe: unify code for log -S/-G
diffcore-pickaxe: fix leaks in "log -S<block>" and "log -G<pattern>"
diffcore-pickaxe: port optimization from has_changes() to diff_grep()
diffcore-pickaxe: respect --no-textconv
diffcore-pickaxe: remove fill_one()
diffcore-pickaxe: remove unnecessary call to get_textconv()
A few bugfixes to "git rerere" working on corner case merge
conflicts.
* js/rerere-forget-protect-against-NUL:
rerere forget: do not segfault if not all stages are present
rerere forget: grok files containing NUL
"git help" learned "-g" option to show the list of guides just like
list of commands are given with "-a".
* po/help-guides:
doc: include --guide option description for "git help"
help: mention -a and -g option, and 'git help <concept>' usage.
builtin/help.c: add list_common_guides_help() function
builtin/help.c: add --guide option
builtin/help.c: split "-a" processing into two
The 'PIPE' test prerequisite was already defined identically by t9010
and t9300, therefore it makes sense to make it a predefined
prerequisite.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it a bit clearer that --worktree-attributes is about files in the
working tree (checked out files, possibly changed) and not the current
working directory ($PWD). Link to the ATTRIBUTES section, which has
more details.
Reported-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the git directory is accessed through a symlink like
ln -s /tmp/git /tmp/git-symlink
cd /tmp/git-symlink/t
make -C .. && ./t9903-bash-prompt.sh
$TRASH_DIRECTORY is /tmp/git-symlink/t/trash directory.t9903-bash-prompt
and $(pwd -P) is /tmp/git/t/trash directory.t9903-bash-prompt.
When __gitdir looks up the path through 'git rev-parse --git-dir', it
will return paths similar to $(pwd -P). This behavior is already tested in
t9903 'gitdir - resulting path avoids symlinks'.
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hg_log() test helper uses the "--graph" parameter that is
implemented by the GraphLog extension. If the extension is not activated
by the user, the parameter is not available. Activate the extension in
setup().
Also changes the way we grep the output in hg_log(). The pipe operator
can hide the return code of hg command. As a matter of fact, if log
fails because it doesn't know about "--graph", it doesn't report any
failure and let's you think everything worked.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial allows absolute file paths, and Git doesn't like that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem reportedly happened after doing a push that fails, the abort
causes the state of remote-hg to go bad, this happens because
remote-hg's marks are not stored, but 'git fast-export' marks are.
Ensure that the marks are _always_ stored.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If set to true acts as hg's clone/pull --insecure option.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning or pushing fails, we don't want to show a stack-trace.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we shouldn't do this, as it's not recommended in mercurial
documentation, but there's no other way to push multiple bookmarks (on
the same branch), which would be the behavior most similar to git.
At the same time, add a configuration option for the people that don't
want to risk creating new remote heads.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial emits messages like "searching for changes", "no changes
found", etc. meant for the use of its own UI layer, which break the pipe
between transport helper and remote helper.
Since there's no way to silence Mercurial, let's redirect to standard
error.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the maximum number of splits to make when dividing the diff stat
lines based on space characters.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a single argument was a non-commit, the error message used to be:
fatal: BUG: expected exactly one commit from walk
For multiple arguments, when none of the arguments was a commit, the error was:
fatal: empty commit set passed
Finally, when some of the arguments were non-commits, we ignored those
arguments. Fix this bug and make sure all arguments are commits, and
for the first non-commit, error out with:
fatal: <name>: Can't cherry-pick a <type>
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The examples in the documentation are all for Apache. Let's
at least cover the basics: an anonymous server, an
authenticated server, and a "half auth" server with
anonymous read and authenticated write.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the http-backend is set up to allow anonymous read but
authenticated write, the http-backend manual suggests
catching only the "/git-receive-pack" POST of the packfile,
not the initial "info/refs?service=git-receive-pack" GET in
which we advertise refs.
This does work and is secure, as we do not allow any write
during the info/refs request, and the information in the ref
advertisement is the same that you would get from a fetch.
However, the configuration required by the server is
slightly more complex. The default `http.receivepack`
setting is to allow pushes if the webserver tells us that
the user authenticated, and otherwise to return a 403
("Forbidden"). That works fine if authentication is turned
on completely; the initial request requires authentication,
and http-backend realizes it is OK to do a push.
But for this "half-auth" state, no authentication has
occurred during the initial ref advertisement. The
http-backend CGI therefore does not think that pushing
should be enabled, and responds with a 403. The client
cannot continue, even though the server would have allowed
it to run if it had provided credentials.
It would be much better if the server responded with a 401,
asking for credentials during the initial contact. But
git-http-backend does not know about the server's auth
configuration (so a 401 would be confusing in the case of a
true anonymous server). Unfortunately, configuring Apache to
recognize the query string and apply the auth appropriately
to receive-pack (but not upload-pack) initial requests is
non-trivial.
The site admin can work around this by just turning on
http.receivepack explicitly in its repositories. Let's
document this workaround.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new humanize() function to print loose objects size, pack size,
and garbage size in verbose mode, or loose objects size in regular mode.
This patch doesn't change the way anything is displayed when the option
is not used.
Also update the documentation.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Humanization of downloaded size is done in the same function as text
formatting in 'process.c'. The code cannot be reused easily elsewhere.
Separate text formatting from size simplification and make the
function public in strbuf so that it can easily be used by other
callers.
We now can use strbuf_humanise_bytes() for both downloaded size and
download speed calculation. One of the drawbacks is that speed will
now look like this when download is stalled: "0 bytes/s" instead of
"0 KiB/s".
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
bsdtar, which is the default tar on Mac OS X, handles empty archives
just fine but reports archives containing only a pax extended header
comment as damaged. Work around the issue by explicitly generating
the archive for the tree and not the commit, which causes git archive
to omit the commit hash comment record from the tar file.
Reported-by: BJ Hargrave <bj@bjhargrave.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Filter the list of refs returned via the dumb HTTP protocol according
to the active namespace, consistent with other clients of the
upload-pack service.
Signed-off-by: John Koleszar <jkoleszar@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try reading gitfile files when processing --reference options to clone.
This will allow, among other things, using a submodule checked out with
a recent version of git as a reference repository without requiring the
user to have internal knowledge of submodule layout.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not report that an argument to clone's --reference option is not a
local directory. Nothing checks for the existence or type of the path
as supplied by the user; checks are only done for particular contents of
the supposed directory, so we have no way to know the status of the
supplied path. Telling the user that a directory doesn't exist when
that isn't actually known may lead him or her on the wrong path to
finding the problem.
Instead just state that the entered path is not a local repository which
is really all that is known about it. It could be more helpful to state
the actual paths which were checked, but I believe that giving a good
description of that would be too verbose for a simple error message and
would be too dependent on implementation details.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After printing the list of left-behind commits (with abbreviated
hashes), use an abbreviated hash in the suggested 'git branch' command;
there's no point in outputting a full 40-character hex string in some
friendly advice.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revision_history() is deprecated and doesn't do what we want (revno
instead of dotted_revno?).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patches didn't deal with all the scenarios.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Bracey reports that the change regresses a case shown in the
user manual.
Trading one fix with another breakage is not worth it. Just keep
the test to document the existing breakage, and revert the change
for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation says:
the output from the command omits entries that match the
<branch1> tree.
But currently "added in branch1" and "removed in branch1" (both while
unchanged in branch2) do print output. Change this so that the
behaviour matches the documentation.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While explicitly stating that the commit message in a prerequisite
line is optional, we required all lines with 40 or more characters
to contain a space after the object name, bailing out if a line
consisted of an object name only. This was to allow bundling a
history to a commit without an message, but the code forgot that it
already called rtrim() to remove that whitespace.
As a workaround, only check for SP when the line has more than 40
characters.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
