Arnaud Lacombe reported that with the recent change to reject overlapping
hunks fed to "git apply", the edit mode of an "add -p" session that lazily
feeds overlapping hunks without coalescing adjacent ones claim that the
patch does not apply. Expose the problem to be fixed.
Cf. http://thread.gmane.org/gmane.comp.version-control.git/170685/focus=171000
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the $projects_list_group_categories option which, if enabled,
will result in grouping projects by category on the project list page.
The category is specified for each project by the $GIT_DIR/category file
or the 'gitweb.category' variable in its configuration file. By default,
projects are put in the $project_list_default_category category.
Note:
- Categories are always sorted alphabetically, with projects in
each category sorted according to the globally selected $order.
- When displaying a subset of all the projects (page limiting), the
category headers are only displayed for projects present on the page.
The feature is inspired from Sham Chukoury's patch for the XMMS2
gitweb, but has been rewritten for the current gitweb code. The CSS
for categories is inspired from Gustavo Sverzut Barbieri's patch to
group projects by path.
Thanks to Florian Ragwitz for Perl tips.
[jn: Updated to post restructuring projects list generation, fixed bugs,
added very basic test in t9500 that there are no warnings from Perl.]
Signed-off-by: Sebastien Cevey <seb@cine7.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract filtering out forks (which is done if 'forks' feature is
enabled) into filter_forks_from_projects_list subroutine, and
searching projects (via projects search form, or via content tags)
into search_projects_list subroutine.
Both are now run _before_ displaying projects, and not while printing;
this allow to know upfront if there were any found projects. Gitweb
now can and do print 'No such projects found' if user searches for
phrase which does not correspond to any project (any repository).
This also would allow splitting projects list into pages, if we so
desire.
Filtering out forks and marking repository (project) as having forks
is now consolidated into one subroutine (special case of handling
forks in git_get_projects_list only for $projects_list being file is
now removed). Forks handling is also cleaned up and simplified.
$pr->{'forks'} now contains un-filled list of forks; we can now also
detect situation where the way for having forks is prepared, but there
are no forks yet.
Sorting projects got also refactored in a very straight way (just
moving code) into sort_projects_list subroutine.
The interaction between forks, content tags and searching is now made
more explicit: searching whether by tag, or via search form turns off
fork filtering (gitweb searches also forks, and will show all
results). If 'ctags' feature is disabled, then searching by tag is
too.
The t9500 test now includes some basic test for 'forks' and 'ctags'
features; the t9502 includes test checking if gitweb correctly filters
out forks.
Generating list of projects by scanning given directory is now also a
bit simplified wrt. handling filtering; it is byproduct of extracting
filtering forks to separate subroutine.
While at it we now detect that there are no projects and respond with
"404 No projects found" also for 'project_index' and 'opml' actions.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When encountering errors or unknown tokens while parsing parameters to the
--dirstat option, it makes sense to die() with an error message informing
the user of which parameter did not make sense. However, when parsing the
diff.dirstat config variable, we cannot simply die(), but should instead
(after warning the user) ignore the erroneous or unrecognized parameter.
After all, future Git versions might add more dirstat parameters, and
using two different Git versions on the same repo should not cripple the
older Git version just because of a parameter that is only understood by
a more recent Git version.
This patch fixes the issue by refactoring the dirstat parameter parsing
so that parse_dirstat_params() keeps on parsing parameters, even if an
earlier parameter was not recognized. When parsing has finished, it returns
zero if all parameters were successfully parsed, and non-zero if one or
more parameters were not recognized (with appropriate error messages
appended to the 'errmsg' argument).
The parse_dirstat_params() callers then decide (based on the return value
from parse_dirstat_params()) whether to warn and ignore (in case of
diff.dirstat), or to warn and die (in case of --dirstat).
The patch also adds a couple of tests verifying the correct behavior of
--dirstat and diff.dirstat in the face of unknown (possibly future) dirstat
parameters.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.
The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).
For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.
In linux-2.6.git, running the three different --dirstat modes:
time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null
yields the following average runtimes on my machine:
- "changes" (default): ~6.0 s
- "lines": ~9.6 s
- "files": ~0.1 s
So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.
The patch also includes documentation and tests for the new dirstat mode.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first digit after the decimal point is kept, as the dirstat
calculations all happen in permille.
Selftests verifying floating-point percentage input has been added.
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new diff.dirstat config variable takes the same arguments as
'--dirstat=<args>', and specifies the default arguments for --dirstat.
The config is obviously overridden by --dirstat arguments passed on the
command line.
When not specified, the --dirstat defaults are 'changes,noncumulative,3'.
The patch also adds several tests verifying the interaction between the
diff.dirstat config variable, and the --dirstat command line option.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having multiple interconnected dirstat-related options, teach
the --dirstat option itself to accept all behavior modifiers as parameters.
- Preserve the current --dirstat=<limit> (where <limit> is an integer
specifying a cut-off percentage)
- Add --dirstat=cumulative, replacing --cumulative
- Add --dirstat=files, replacing --dirstat-by-file
- Also add --dirstat=changes and --dirstat=noncumulative for specifying the
current default behavior. These allow the user to reset other --dirstat
parameters (e.g. 'cumulative' and 'files') occuring earlier on the
command line.
The deprecated options (--cumulative and --dirstat-by-file) are still
functional, although they have been removed from the documentation.
Allow multiple parameters to be separated by commas, e.g.:
--dirstat=files,10,cumulative
Update the documentation accordingly, and add testcases verifying the
behavior of the new syntax.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected output from --dirstat=0, is to include any directory with
changes, even if those changes contribute a minuscule portion of the total
changes. However, currently, directories that contribute less than 0.1% are
not included, since their 'permille' value is 0, and there is an
'if (permille)' check in gather_dirstat() that causes them to be ignored.
This test is obviously intended to exclude directories that contribute no
changes whatsoever, but in this case, it hits too broadly. The correct
check is against 'this_dir' from which the permille is calculated. Only if
this value is 0 does the directory truly contribute no changes, and should
be skipped from the output.
This patches fixes this issue, and updates corresponding testcases to
expect the new behvaior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, t4013 is the only selftest that exercises the --dirstat machinery,
but it only does a superficial verification of --dirstat's output.
This patch adds a new selftest - t4047-diff-dirstat.sh - which prepares a
commit containing:
- unchanged files, changed files and files with rearranged lines
- copied files, moved files, and unmoved files
It then verifies the correct dirstat output for that commit in the following
dirstat modes:
- --dirstat
- -X
- --dirstat=0
- -X0
- --cumulative
- --dirstat-by-file
- (plus combinations of the above)
Each of the above tests are also run with:
- no rename detection
- rename detection (-M)
- expensive copy detection (-C -C)
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names and e-mails are sanitized by fmt_ident() when creating commits,
so that they do not contain "<" nor ">", and the "committer" and "author"
lines in the commit object will always be in the form:
("author" | "committer") name SP "<" email ">" SP timestamp SP zone
When parsing the email part out, the current code looks for SP starting
from the end of the email part, but the author could obfuscate the address
as "author at example dot com".
We should instead look for SP followed by "<", to match the logic of the
side that formats these lines.
Signed-off-by: Josh Stone <jistone@redhat.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply parameter expansion. Also use here document to save
test results instead of appending each line with ">>".
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* mz/rebase: (34 commits)
rebase: define options in OPTIONS_SPEC
Makefile: do not install sourced rebase scripts
rebase: use @{upstream} if no upstream specified
rebase -i: remove unnecessary state rebase-root
rebase -i: don't read unused variable preserve_merges
git-rebase--am: remove unnecessary --3way option
rebase -m: don't print exit code 2 when merge fails
rebase -m: remember allow_rerere_autoupdate option
rebase: remember strategy and strategy options
rebase: remember verbose option
rebase: extract code for writing basic state
rebase: factor out sub command handling
rebase: make -v a tiny bit more verbose
rebase -i: align variable names
rebase: show consistent conflict resolution hint
rebase: extract am code to new source file
rebase: extract merge code to new source file
rebase: remove $branch as synonym for $orig_head
rebase -i: support --stat
rebase: factor out call to pre-rebase hook
...
* en/merge-recursive:
merge-recursive: tweak magic band-aid
merge-recursive: When we detect we can skip an update, actually skip it
t6022: New test checking for unnecessary updates of files in D/F conflicts
t6022: New test checking for unnecessary updates of renamed+modified files
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
'git rebase' uses 'git merge' to preserve merges (-p). This preserves
the original merge commit correctly, except when the original merge
commit was created by 'git merge --no-ff'. In this case, 'git rebase'
will fail to preserve the merge, because during 'git rebase', 'git
merge' will simply fast-forward and skip the commit. For example:
B
/ \
A---M
/
---o---O---P---Q
If we try to rebase M onto P, we lose the merge commit and this happens:
A---B
/
---o---O---P---Q
To correct this, we simply do a "no fast-forward" on all merge commits
when rebasing. Since by the time we decided to do a 'git merge' inside
'git rebase', it means there was a merge originally, so 'git merge'
should always create a merge commit regardless of what the merge
branches look like. This way, when rebase M onto P from the above
example, we get:
B
/ \
A---M
/
---o---O---P---Q
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/reflog-with-options:
reflog: fix overriding of command line options
t/t1411: test reflog with formats
builtin/log.c: separate default and setup of cmd_log_init()
Provide an environment variable GIT_PREFIX which contains the subdirectory
from which a !alias was called (i.e. 'git rev-parse --show-prefix') since
these cd to the to level directory before they are executed.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If somebody has a name that includes an rfc822 special, we
will output it literally in the "From:" header. This is
usually OK, but certain characters (like ".") are supposed
to be enclosed in double-quotes in a mail header.
In practice, whether this matters may depend on your MUA.
Some MUAs will happily take in:
From: Foo B. Bar <author@example.com>
without quotes, and properly quote the "." when they send
the actual mail. Others may not, or may screw up harder
things like:
From: Foo "The Baz" Bar <author@example.com>
For example, mutt will strip the quotes, thinking they are
actual syntactic rfc822 quotes.
So let's quote properly, and then (if necessary) we still
apply rfc2047 encoding on top of that, which should make all
MUAs happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --count is used with --cherry-mark, omit the patch equivalent
commits from the count for left and right commits and print the count of
equivalent commits separately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document all test function arguments in the same way.
While at it, tweak the description of test_path_is_* (thanks to Junio),
and correct some grammatical errors.
Signed-off-by: Mathias Lafeldt <misfire@debugon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patches from git passed into p4 end up with the committer being identified
as the person who ran git-p4.
With "submit --preserve-user", git-p4 modifies the p4 changelist (after it
has been submitted), setting the p4 author field.
The submitter is required to have sufficient p4 permissions or git-p4
refuses to proceed. If the git author is not known to p4, the submit will
be abandoned unless git-p4.allowMissingP4Users is true.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -u" updates the index with the updated contents from the working
tree by internally running "diff-files" to grab the set of paths that are
different from the index. Then it updates the index entries for the paths
that are modified in the working tree, and deletes the index entries for
the paths that are deleted in the working tree.
It ignored the output from the diff-files that indicated that a path is
unmerged. For these paths, it instead relied on the fact that an unmerged
path is followed by the result of comparison between stage #2 (ours) and
the working tree, and used that to update or delete such a path when it is
used to record the resolution of a conflict.
As the result, when a path did not have stage #2 (e.g. "we deleted while
the other side added"), these unmerged stages were left behind, instead of
recording what the user resolved in the working tree.
Since we recently fixed "diff-files" to indicate if the corresponding path
exists on the working tree for an unmerged path, we do not have to rely on
the comparison with stage #2 anymore. We can instead tell the diff-files
not to compare with higher stages, and use the unmerged output to update
the index to reflect the state of the working tree.
The changes to the test vector in t2200 illustrates the nature of the bug
and the fix. The test expected stage #1 and #3 entries be left behind,
but it was codifying the buggy behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, e9c8409 (diff-index --cached --raw: show tree entry on the LHS
for unmerged entries., 2007-01-05) taught the command to show the object
name and the mode from the entry coming from the tree side when comparing
a tree with an unmerged index.
This is a belated companion patch that teaches diff-files to show the mode
from the entry coming from the working tree side, when comparing an
unmerged index and the working tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to duplicate the definition of $_z40 and $_x40 that
test-lib.sh supplies the test scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.6.0-rc2~42 (2008-07-31) explains, even pseudo-options like --not
and --glob that need to be parsed in order with revisions should be
marked handled by handle_revision_opt to avoid an error when
parse_revision_opt callers like "git shortlog" encounter them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When relative dates are more than about a year ago, we start
writing them as "Y years, M months". At the point where we
calculate Y and M, we have the time delta specified as a
number of days. We calculate these integers as:
Y = days / 365
M = (days % 365 + 15) / 30
This rounds days in the latter half of a month up to the
nearest month, so that day 16 is "1 month" (or day 381 is "1
year, 1 month").
We don't round the year at all, though, meaning we can end
up with "1 year, 12 months", which is silly; it should just
be "2 years".
Implement this differently with months of size
onemonth = 365/12
so that
totalmonths = (long)( (days + onemonth/2)/onemonth )
years = totalmonths / 12
months = totalmonths % 12
In order to do this without floats, we write the first formula as
totalmonths = (days*12*2 + 365) / (365*2)
Tests and inspiration by Jeff King.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git versions starting at v1.7.5-rc0~29^2 until v1.7.5-rc3~2 (Revert
"run-command: prettify -D_FORTIFY_SOURCE workaround", 2011-04-18)
fixed it, the run_command facility would write a truncated error
message when the command is present but cannot be executed for some
other reason. For example, if I add a 'hello' command to git:
$ echo 'echo hello' >git-hello
$ chmod +x git-hello
$ PATH=.:$PATH git hello
hello
and make it non-executable, this is what I normally get:
$ chmod -x git-hello
$ git hello
fatal: cannot exec 'git-hello': Permission denied
But with the problematic versions, we get disturbing output:
$ PATH=.:$PATH git hello
fatal: $
Add some tests to make sure it doesn't happen again.
The hello-script used in these tests uses cat instead of echo because
on Windows the bash spawned by git converts LF to CRLF in text written
by echo while the bash running tests does not, causing the test to
fail if "echo" is used. Thanks to Hannes for noticing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already wrap names in "from" headers, which tend to be
the long part of an address. But it's also possible for a
long name to not be wrapped, but to make us want to wrap the
email address. For example (imagine for the sake of
readability we want to wrap at 50 characters instead of 78):
From: this is my really long git name <foo@example.com>
The name does not overflow the line, but the name and email
together do. So we would rather see:
From: this is my really long git name
<git@example.com>
Because we wrap the name separately during add_rfc2047, we
neglected this case. Instead, we should see how long the
final line of the wrapped name ended up, and decide whether
or not to wrap based on that. We can't break the address
into multiple parts, so we either leave it with the name, or
put it by itself on a line.
Test by Erik Faye-Lund.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two tests looked for "[Uu]sage" in the output, but we cannot expect the
l10n to use that phrase. Mark them with test_i18ngrep so that in later
versions we can test truly localized versions with the same tests, not
just GETTEXT_POISON that happens to keep the original string in the
output.
Merge a few tests that were artificially split into "do" and "test output
under C_LOCALE_OUTPUT" in the original i18n patches back.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems where the local time and file modification time may be out of
sync (e.g. test directory on NFS) t3306 and t5305 can fail because prune
compares times such as "now" (client time) with file modification times
(server times for remote file systems). I.e., these are spurious test
failures.
Avoid this by setting the relevant modification times to the local time.
Noticed on a system with as little as 2s time skew.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of skipping the whole test, introduce test_i18ngrep wrapper that
pretends a successful result under GETTEXT_POISON build.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index has conflicted submodules, mergetool used to mildly
clobber the module, renaming it to mymodule.BACKUP.nnnn, then failing to
copy it non-recursively.
Recognize submodules and offer a resolution instead:
Submodule merge conflict for 'Shared':
{local}: submodule commit ad9f12e3e6205381bf2163a793d1e596a9e211d0
{remote}: submodule commit f5893fb70ec5646efcd9aa643c5136753ac89253
Use (l)ocal or (r)emote, or (a)bort?
Selecting a commit will stage it, but not update the submodule (as git
does had there been no conflict). Type changes are also supported,
should the path be a submodule on one side, and a file, symlink,
directory, or deleted on the other.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is too coarse-grained way that led to artificial splitting of a
logically single test case into "do" and "check only without poison".
As the majority of check is done by comparing expected and actual output
stored in a file with test_cmp anyway, just introduce test_i18ncmp that
pretends the actual output matched the expected one when gettext-poison
is in effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the init-db messages that were added in v1.7.5-rc1~16^2 (init,
clone: support --separate-git-dir for .git file) by Nguyễn Thái Ngọc
Duy for translation.
This requires splitting up the tests that the patch added so that
certain parts of them can be skipped unless the C_LOCALE_OUTPUT
prerequisite is satisfied.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the "Warning: you are leaving %d commit(s) behind" message added
in v1.7.5-rc0~74^2 (commit: give final warning when reattaching HEAD
to leave commits behind) by Junio C Hamano for translation.
This message requires the use of ngettext() features, and is the first
message to use the Q_() wrapper around ngettext().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_value in config.c has a static buffer of 1024 bytes that it
parse the value into. This can sometimes be a problem when a
config file contains very long values.
It's particularly amusing that git-config already is able to write
such files, so it should probably be able to read them as well.
Fix this by using a strbuf instead of a fixed-size buffer.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.
Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.
Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when using --dirstat-by-file, it first does the full --dirstat
analysis (using diffcore_count_changes()), and then resets 'damage' to 1,
if any damage was found by diffcore_count_changes().
But --dirstat-by-file is not interested in the file damage per se. It only
cares if the file changed at all. In that sense it only cares if the blob
object for a file has changed. We therefore only need to compare the
object names of each file pair in the diff queue and we can skip the
entire --dirstat analysis and simply set 'damage' to 1 for each entry
where the object name has changed.
This makes --dirstat-by-file faster, and also bypasses --dirstat's practice
of ignoring rearranged lines within a file.
The patch also contains an added testcase verifying that --dirstat-by-file
now detects changes that only rearrange lines within a file.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a testcase documenting the current behavior.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't assume one comes after the other on the command line. Use a
three-state variable to track and check its value accordingly.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of these passes just fine; the other one exposes a problem where
command line flag order matters for --no-keep-index and --patch
interaction.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-remote-mirror-safer:
remote: deprecate --mirror
remote: separate the concept of push and fetch mirrors
remote: disallow some nonsensical option combinations
Before we apply a stash, we make sure there are no changes
in the worktree that are not in the index. This check dates
back to the original git-stash.sh, and is presumably
intended to prevent changes in the working tree from being
accidentally lost during the merge.
However, this check has two problems:
1. It is overly restrictive. If my stash changes only file
"foo", but "bar" is dirty in the working tree, it will
prevent us from applying the stash.
2. It is redundant. We don't touch the working tree at all
until we actually call merge-recursive. But it has its
own (much more accurate) checks to avoid losing working
tree data, and will abort the merge with a nicer
message telling us which paths were problems.
So we can simply drop the check entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King reported a problem with git stash apply incorrectly
applying an invalid stash reference.
There is an existing test that should have caught this, but
the test itself was broken, resulting in a false positive.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, "git rev-parse ref@{9999999}" did not
generate an error. Therefore when we got an invalid stash
reference in "stash apply", we could end up not noticing
until quite late. Commit b0f0ecd (detached-stash: work
around git rev-parse failure to detect bad log refs,
2010-08-21) handled this by checking for the "Log for stash
has only %d entries" warning on stderr when we validated the
ref.
A few days later, e6eedc3 (rev-parse: exit with non-zero
status if ref@{n} is not valid., 2010-08-24) fixed the
original issue. That made the extra stderr test superfluous,
but also introduced a new bug. Now the early call to:
git rev-parse --symbolic "$@"
fails, but we don't notice the exit code. Worse, its empty
output means we think the user didn't provide us a ref, and
we try to apply stash@{0}.
This patch checks the rev-parse exit code and fails early in
the revision parsing process. We can also get rid of the
stderr test; as a bonus, this means that "stash apply" can
now run under GIT_TRACE=1 properly.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
By default git submodule update runs a simple checkout on submodules that
are not up-to-date. If the submodules contains modified or untracked
files, the command may exit sanely with an error:
$ git submodule update
error: Your local changes to the following files would be overwritten by
checkout:
file
Please, commit your changes or stash them before you can switch branches.
Aborting
Unable to checkout '1b69c6e55606b48d3284a3a9efe4b58bfb7e8c9e' in
submodule path 'test1'
In order to reset a whole git submodule tree, a user has to run first 'git
submodule foreach --recursive git checkout -f' and then run 'git submodule
update'.
This patch adds a --force option for the update command (only used for
submodules without --rebase or --merge options). It passes the --force
option to git checkout which will throw away the local changes.
Signed-off-by: Nicolas Morey-Chaisemartin <nmorey@kalray.eu>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a pull into an unborn branch, we do not use "git merge"
at all. Instead, we call read-tree directly. However, we
used the --reset parameter instead of "-m", which turns off
the safety features.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/format-patch-multiline-header:
format-patch: rfc2047-encode newlines in headers
format-patch: wrap long header lines
strbuf: add fixed-length version of add_wrapped_text
Currently, the "Did you mean..." message suggests "commit:fullpath"
only. Extend this to show the more convenient "commit:./file" form also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the current code, it's a "'"'"'" jungle, and we test only 1 line of
the 2 line response. Factor out and test both.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The t2019-checkout-ambiguous-ref.sh tests added in v1.7.4.3~12^2
examines the output for a translatable string, and must be marked
with C_LOCALE_OUTPUT; otherwise, GETTEXT_POISON=YesPlease tests
will break.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reviewing a patch while concentrating primarily on the text after
then change, wading through pages of deleted text involves a cognitive
burden.
Introduce the -D option that omits the preimage text from the patch output
for deleted files. When used with -B (represent total rewrite as a single
wholesale deletion followed by a single wholesale addition), the preimage
text is also omitted.
To prevent such a patch from being applied by mistake, the output is
designed not to be usable by "git apply" (or GNU "patch"); it is strictly
for human consumption.
It of course is possible to "apply" such a patch by hand, as a human can
read the intention out of such a patch. It however is impossible to apply
such a patch even manually in reverse, as the whole point of this option
is to omit the information necessary to do so from the output.
Initial request by Mart Sõmermaa, documentation and tests helped by
Michael J Gruber.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "git reflog" overrides some command line options such as
"--format".
Fix this by using the new 2-phase version of cmd_log_init().
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reflog --format=short" does not work because "reflog" overrides the
format option. This is documented in code. Document this by a test
(known failure) also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git svn mkdirs" (which creates empty directories in the current
working copy) can be very slow and is often unnecessary. Provide a
config file option "svn-remote.<name>.automkdirs" that prevents empty
directories from being created automatically. (They are still created
if "git svn mkdirs" is invoked explicitly.)
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a last ditch effort, try rmdir(2) when we cannot read the directory
to be removed. It may be an empty directory that we can remove without
any permission, as long as we can modify its parent directory.
Noticed by Linus.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During a merge module_list returns conflicting submodules several times
(stage 1,2,3) which caused the submodules to be used multiple times in
git submodule init, sync, update and status command.
There are 5 callers of module_list; they all read (mode, sha1, stage,
path) tuple, and most of them care only about path. As a first level
approximation, it should be Ok (in the sense that it does not make things
worse than it currently is) to filter the duplicate paths from module_list
output, but some callers should change their behaviour when the merge in
the superproject still has conflicts.
Notice the higher-stage entries, and emit only one record from
module_list, but while doing so, mark the entry with "U" (not [0-3]) in
the $stage field and null out the SHA-1 part, as the object name for the
lowest stage does not give any useful information to the caller, and this
way any caller that uses the object name would hopefully barf. Then
update the codepaths for each subcommands this way:
- "update" should not touch the submodule repository, because we do not
know what commit should be checked out yet.
- "status" reports the conflicting submodules as 'U000...000' and does
not recurse into them (we might later want to make it recurse).
- The command called by "foreach" may want to do whatever it wants to do
by noticing the merged status in the superproject itself, so feed the
path to it from module_list as before, but only once per submodule.
- "init" and "sync" are unlikely things to do while the superproject is
still not merged, but as long as a submodule is there in $path, there
is no point skipping it. It might however want to take the merged
status of .gitmodules into account, but that is outside of the scope of
this topic.
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
contrib/thunderbird-patch-inline: do not require bash to run the script
t8001: check the exit status of the command being tested
strbuf.h: remove a tad stale docs-in-comment and reference api-doc instead
Typos: t/README
Documentation/config.txt: make truth value of numbers more explicit
git-pack-objects.txt: fix grammatical errors
parse-remote: replace unnecessary sed invocation
git-remote currently has one option, "--mirror", which sets
up mirror configuration which can be used for either
fetching or pushing. It looks like this:
[remote "mirror"]
url = wherever
fetch = +refs/*:refs/*
mirror = true
However, a remote like this can be dangerous and confusing.
Specifically:
1. If you issue the wrong command, it can be devastating.
You are not likely to "push" when you meant to "fetch",
but "git remote update" will try to fetch it, even if
you intended the remote only for pushing. In either
case, the results can be quite destructive. An
unintended push will overwrite or delete remote refs,
and an unintended fetch can overwrite local branches.
2. The tracking setup code can produce confusing results.
The fetch refspec above means that "git checkout -b new
master" will consider refs/heads/master to come from
the remote "mirror", even if you only ever intend to
push to the mirror. It will set up the "new" branch to
track mirror's refs/heads/master.
3. The push code tries to opportunistically update
tracking branches. If you "git push mirror foo:bar",
it will see that we are updating mirror's
refs/heads/bar, which corresponds to our local
refs/heads/bar, and will update our local branch.
To solve this, we split the concept into "push mirrors" and
"fetch mirrors". Push mirrors set only remote.*.mirror,
solving (2) and (3), and making an accidental fetch write
only into FETCH_HEAD. Fetch mirrors set only the fetch
refspec, meaning an accidental push will not force-overwrite
or delete refs on the remote end.
The new syntax is "--mirror=<fetch|push>". For
compatibility, we keep "--mirror" as-is, setting up both
types simultaneously.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two configration variables grep.extendedRegexp and grep.lineNumbers to
allow the user to skip typing -E and -n on the command line, respectively.
Scripts that are meant to be used by random users and/or in random
repositories now have use -G and/or --no-line-number options as
appropriately to override the settings in the repository or user's
~/.gitconfig settings. Just because the script didn't say "git grep -n" no
longer guarantees that the output from the command will not have line
numbers.
Signed-off-by: Joe Ratterman <jratt0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, "notes add" (without -f/--force) will abort when the given object
already has existing notes. This makes sense for the modes of "git notes add"
that would necessarily overwrite the old message (when using the -m/-F/-C/-c
options). However, when no options are given (meaning the notes are created
from scratch in the editor) it is not very user-friendly to abort on existing
notes, and forcing the user to run "git notes edit".
Instead, it is better to simply "redirect" to "git notes edit" automatically,
i.e. open the existing notes in the editor and let the user edit them.
This patch does just that.
This changes the behavior of "git notes add" without options when notes
already exist for the given object, but I doubt that many users really depend
on the previous failure from "git notes add" in this case.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid running the command being tested as an upstream of a pipe;
doing so will lose its exit status.
While at it, modernise the style of the script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This (morally) reverts commit d280f68313,
which added some tests that are a pain to maintain and are not likely
to find bugs in git.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
* 'svn-fe' of git://repo.or.cz/git/jrn:
tests: kill backgrounded processes more robustly
vcs-svn: a void function shouldn't try to return something
tests: make sure input to sed is newline terminated
vcs-svn: add missing cast to printf argument
t0081 creates several background processes that write to a fifo and
then go to sleep for a while (so the reader of the fifo does not see
EOF).
Each background process is made in a curly-braced block in the shell,
and after we are done reading from the fifo, we use "kill $!" to kill
it off.
For a simple, single-command process, this works reliably and kills
the child sleep process. But for more complex commands like
"make_some_output && sleep", the results are less predictable. When
executing under bash, we end up with a subshell that gets killed by
the $! but leaves the sleep process still alive.
This is bad not only for process hygeine (we are leaving random sleep
processes to expire after a while), but also interacts badly with the
"prove" command. When prove executes a test, it does not realize the
test is done when it sees SIGCHLD, but rather waits until the test's
stdout pipe is closed. The orphaned sleep process may keep that pipe
open via test-lib's file descriptor 5, causing prove to hang for 100
seconds.
The solution is to explicitly use a subshell and to exec the final
sleep process, so that when we "kill $!" we get the process id of the
sleep process.
[jn: original patch by Jeff had some additional bits:
1. Wrap the "kill" in a test_when_finished, since we want
to clean up the process whether the test succeeds or not.
2. The "kill" is part of our && chain for test success. It
probably won't fail, but it can if the process has
expired before we manage to kill it. So let's mark it
as OK to fail.
I'm postponing that for now.]
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
With most command line options, later instances of an option
override earlier ones. With cumulative options like
"--notes", however, there is no way to say "forget the
--notes I gave you before".
Let's have --no-notes trigger this forgetting, so that:
git log --notes=foo --no-notes --notes=bar
will show only the "bar" notes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have --show-notes, but it has a few shortcomings:
1. Using --show-notes=<ref> implies that we should also
show the default notes. Which means you also need to
use --no-standard-notes if you want to suppress them.
2. It is negated by --no-notes, which doesn't match.
3. It's too long to type. :)
This patch introduces --notes, which behaves exactly like
--show-notes, except that using "--notes=<ref>" does not
imply showing the default notes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the created test repositories will be affected by users ~/.gitconfig.
For example, setting core.logAllrefupdates in users config will make all
calls to "git config --unset core.logAllrefupdates" fail which will break
the first test which uses the statement and expects it to succeed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX only requires sed to work on text files and because it does
not end with a newline, this commit's content is not a text file.
Add a newline to fix it. Without this change, OS X sed helpfully
adds a newline to actual.message, causing t9010.13 to fail.
Reported-by: Torsten Bögershausen <tboegi@web.de>
Tested-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
In commit 95a1d12e9b ("tests: scrub environment of GIT_* variables") all
environment variables starting with "GIT_" were unset for the tests using
a perl script rather than unsetting them one by one. Only three exceptions
were made to make them work as before: "GIT_TRACE*", "GIT_DEBUG*" and
"GIT_USE_LOOKUP".
Unfortunately some environment variables used by the test framework itself
were not added to the exceptions and thus stopped working when given
before the make command instead of after it. Those are:
- GIT_NOTES_TIMING_TESTS
- GIT_PATCHID_TIMING_TESTS
- GIT_PROVE_OPTS
- GIT_REMOTE_SVN_TEST_BIG_FILES
- GIT_SKIP_TESTS
- GIT_TEST*
- GIT_VALGRIND_OPTIONS
I noticed that when skipping a test the way I was used to suddenly failed:
GIT_SKIP_TESTS='t1234' GIT_TEST_OPTS='--root=/dev/shm' make -j10 test
This should work according to t/README, but didn't anymore, so let's fix
that by adding them to the exception list. And to avoid having a long
regexp put the exceptions in a separate variable using nicer formatting.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
* 'svn-fe' of git://repo.or.cz/git/jrn:
vcs-svn: handle log message with embedded NUL
vcs-svn: avoid unnecessary copying of log message and author
vcs-svn: remove buffer_read_string
vcs-svn: make reading of properties binary-safe
Pass the log message by strbuf instead of as a C-style string and use
fwrite instead of printf to write it to fast-import so embedded '\0'
bytes can be preserved.
Currently "git log" doesn't show the embedded NULs but "git cat-file
commit" can.
While at it, stop including system headers from repo_tree.h. git
source files need to include git-compat-util.h (or cache.h or
builtin.h) sooner to ensure the appropriate feature test macros are
defined.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
All previous users of buffer_read_string have already been converted
to use the more intuitive buffer_read_binary, so remove the old API to
avoid some confusion.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
svn-fe errors out on revision 59151 of the ASF repository:
fatal: invalid dump: unexpected end of file
The proximate cause is a property with an embedded NUL character.
Previously such anomalies were ignored but commit c9d1c8ba
(2010-12-28) introduced a check strlen(val) == len to avoid reading
uninitialized data when a property list ends early and unfortunately
this test does not distinguish between "foo" followed by EOF and the
string "foo\0bar\0baz".
Fix it by using buffer_read_binary to read to a strbuf and checking
the actual length read. Most consumers of properties still use
C-style strings, so in practice an author or log message with embedded
NULs will be truncated, but a least this way svn-fe won't error out
(fixing the regression).
Reported-by: David Barr <david.barr@cordelta.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
For a pull into an unborn branch, we do not use "git merge"
at all. Instead, we call read-tree directly. However, we
used the --reset parameter instead of "-m", which turns off
the safety features.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we merge into an unborn branch, there are basically two
steps:
1. Write the sha1 of the new commit into the ref pointed
to by HEAD.
2. Update the index with the new content, and check it out
to the working tree.
We currently do them in this order. However, (2) is the step
that is much more likely to fail, since it can be blocked by
things like untracked working tree files. When it does, the
merge fails and we are left with an empty index but an
updated HEAD.
This patch switches the order, so that a failure in updating
the index leaves us unchanged. Of course, a failure in
updating the ref now leaves us with an updated index and
mis-matched HEAD. That is arguably not much better, but it
is probably less likely to actually happen.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file ends up conflicting with the test just after it
(causing the "git merge" to fail). Neither test is to blame
for the bug, though. It looks like the merge in 1a9fe45
(Merge branch 'tr/merge-unborn-clobber', 2011-02-09) is what
caused the conflict.
We didn't notice because the follow-on test is already
marked as expect_failure (even though it has since been
fixed, and now succeeds once the untracked file is moved out
of the way).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was fixed by 1d718a51 (do not overwrite untracked
symlinks, 2011-02-20).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch changes behavior of the two functions. Previously it does
prefix matching only. Now it can also do wildcard matching.
All callers are updated. Some gain wildcard matching (archive,
checkout), others reset pathspec_item.has_wildcard to retain old
behavior (ls-files, ls-tree as they are plumbing).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike bash and ksh, dash and busybox ash do not support brace
expansion (as in 'echo {hello,world}'). So when dash is sh,
t6009.13 (set up dodecapus) ends up pass a string beginning with
"root{1,2," to "git merge" verbatim and the test fails.
Fix it by introducing a variable to hold the list of parents for
the dodecapus and populating it in a more low-tech way.
While at it, simplify a little by combining this setup code with the
test it sets up for.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since e9c8409 (diff-index --cached --raw: show tree entry on the LHS for
unmerged entries., 2007-01-05), an unmerged entry should be detected by
using DIFF_PAIR_UNMERGED(p), not by noticing both one and two sides of
the filepair records mode=0 entries. However, it forgot to update some
parts of the rename detection logic.
This only makes difference in the "diff --cached" codepath where an
unmerged filepair carries information on the entries that came from the
tree. It probably hasn't been noticed for a long time because nobody
would run "diff -M" during a conflict resolution, but "git status" uses
rename detection when it internally runs "diff-index" and "diff-files"
and gives nonsense results.
In an unmerged pair, "one" side can have a valid filespec to record the
tree entry (e.g. what's in HEAD) when running "diff --cached". This can
be used as a rename source to other paths in the index that are not
unmerged. The path that is unmerged by definition does not have the
final content yet (i.e. "two" side cannot have a valid filespec), so it
can never be a rename destination.
Use the DIFF_PAIR_UNMERGED() to detect unmerged filepair correctly, and
allow the valid "one" side of an unmerged filepair to be considered a
potential rename source, but never to be considered a rename destination.
Commit message and first two test cases by Junio, the rest by Martin.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-new-workdir script in contrib/ makes a new work tree by sharing
many subdirectories of the .git directory with the original repository.
When rerere.enabled is set in the original repository, but the user has
not encountered any conflicts yet, the original repository may not yet
have .git/rr-cache directory.
When rerere wants to run in a new work tree created from such a young
original repository, it fails to mkdir(2) .git/rr-cache that is a symlink
to a yet-to-be-created directory.
There are three possible approaches to this:
- A naive solution is not to create a symlink in the git-new-workdir
script to a directory the original does not have (yet). This is not a
solution, as we tend to lazily create subdirectories of .git/, and
having rerere.enabled configuration set is a strong indication that the
user _wants_ to have this lazy creation to happen;
- We could always create .git/rr-cache upon repository creation. This is
tempting but will not help people with existing repositories.
- Detect this case by seeing that mkdir(2) failed with EEXIST, checking
that the path is a symlink, and try running mkdir(2) on the link
target.
This patch solves the issue by doing the third one.
Strictly speaking, this is incomplete. It does not attempt to handle
relative symbolic link that points into the original repository, but this
is good enough to help people who use contrib/workdir/git-new-workdir
script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also adds test for "--merges" and "--no-merges" which we did not
have so far.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
* jn/test-sanitize-git-env:
tests: scrub environment of GIT_* variables
config: drop support for GIT_CONFIG_NOGLOBAL
gitattributes: drop support for GIT_ATTR_NOGLOBAL
tests: suppress system gitattributes
tests: stop worrying about obsolete environment variables
* jc/maint-fetch-alt:
fetch-pack: objects in our alternates are available to us
refs_from_alternate: helper to use refs from alternates
Conflicts:
builtin/receive-pack.c
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.4.2
Work around broken ln on solaris as used in t8006
t/README: Add a note about running commands under valgrind
* so/submodule-no-update-first-time:
t7406: "git submodule update {--merge|--rebase]" with new submodules
submodule: no [--merge|--rebase] when newly cloned
The test setup in t8006-blame-textconv.sh uses "ln -sf" to
overwrite an existing symlink. Unfortunately, both /usr/bin/ln
and /usr/xpg4/bin/ln on solaris 9 don't properly handle -f and -s
used at the same time. This caused the test setup and subsequent
checks to fail.
Instead, remove the symlink and then create a new one in the
setup code.
The upstream Solaris bug (fixed in 10, but not 9) is documented
here:
http://bugs.opensolaris.org/view_bug.do?bug_id=4372462
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: moved "cd subdir" inside subshell and fixed comparison with expected]
Signed-off-by: Piotr Krukowiecki <piotr.krukowiecki@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test suite runs valgrind with certain options activated. Add a
note saying how to run commands under the same conditions as the test
suite does.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When leaving a detached HEAD, we do a revision walk to make
sure the commit we are leaving isn't being orphaned.
However, this leaves crufty marks in the commit objects
which can confuse later walkers, like the one in
stat_tracking_info.
Let's clean up after ourselves to prevent this conflict.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 8e2dc6ac added a warning when we leave a detached
HEAD whose commit is not reachable from any ref tip. Let's
add a few basic tests to make sure it works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/i18n-basic:
i18n: "make distclean" should clean up after "make pot"
i18n: Makefile: "pot" target to extract messages marked for translation
i18n: add stub Q_() wrapper for ngettext
i18n: do not poison translations unless GIT_GETTEXT_POISON envvar is set
i18n: add GETTEXT_POISON to simulate unfriendly translator
i18n: add no-op _() and N_() wrappers
commit, status: use status_printf{,_ln,_more} helpers
commit: refer to commit template as s->fp
wt-status: add helpers for printing wt-status lines
Conflicts:
builtin/commit.c
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
* jk/format-patch-multiline-header:
format-patch: rfc2047-encode newlines in headers
format-patch: wrap long header lines
strbuf: add fixed-length version of add_wrapped_text
--separate-git-dir tells git to create git dir at the specified
location, instead of where it is supposed to be. A .git file that
points to that location will be put in place so that it appears normal
to repo discovery process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support the well-know convention of reading standard input instead of a
named file if "-" (dash) is specified. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the helper function split from the receiving end of "git push" to
allow the same optimization on the receiving end of "git fetch".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The receiving end of "git push" advertises the objects that the repository
itself does not use, but are at the tips of refs in other repositories
whose object databases are used as alternates for it. This helps it avoid
having to receive (and the pusher having to send) objects that are already
available to the receiving repository via the alternates mechanism.
Tweak the helper function that implements this feature, and move it to
transport.[ch] for future reuse by other programs.
The additional test demonstrates how this optimization is helping "git push",
and "git fetch" is ignorant about it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare draft release notes to 1.7.4.2
gitweb: highlight: replace tabs with spaces
make_absolute_path: return the input path if it points to our buffer
valgrind: ignore SSE-based strlen invalid reads
diff --submodule: split into bite-sized pieces
cherry: split off function to print output lines
branch: split off function that writes tracking info and commit subject
standardize brace placement in struct definitions
compat: make gcc bswap an inline function
enums: omit trailing comma for portability
Conflicts:
RelNotes
* lt/rename-no-extra-copy-detection:
diffcore-rename: improve estimate_similarity() heuristics
diffcore-rename: properly honor the difference between -M and -C
for_each_hash: allow passing a 'void *data' pointer to callback
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
The code notices that the caller does not want any detail of the changes
and only wants to know if there is a change or not by specifying --quiet.
And it breaks out of the loop when it knows it already found any change.
When you have a post-process filter (e.g. --diff-filter), however, the
path we found to be different in the previous round and set HAS_CHANGES
bit may end up being uninteresting, and there may be no output at the end.
The optimization needs to be disabled for such case.
Note that the f245194 (diff: change semantics of "ignore whitespace"
options, 2009-05-22) already disables this optimization by refraining
from setting HAS_CHANGES when post-process filters that need to inspect
the contents of the files (e.g. -S, -w) in diff_change() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new unit tests. One to test the feature that that
was added in e32e00d, and another to test the regression
that was fixed in the parent to this commit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of strlen use SSE to speed up the calculation and load 4
bytes at a time, even if it means reading past the end of the
allocated memory. This read is safe and when the strlen function is
inlined, it is not replaced by valgrind, which reports a
false-possitive.
Tell valgrind to ignore this particular error, as the read is, in
fact, safe. Current upstream-released version 3.6.1 is affected. Some
distributions have this fixed in their latest versions.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Variables from the inherited environment that are meaningful to git
can break tests in undesirable ways. For example,
GIT_PAGER=more sh t5400-send-pack.sh -v -i
hangs. So unset all environment variables in the GIT_ namespace in
test-lib, with a few exceptions:
- GIT_TRACE* are useful for tracking down bugs exhibited by a failing
test;
- GIT_DEBUG* are GIT_TRACE variables by another name, practically
speaking. They should probably be tweaked to follow the
GIT_TRACE_foo scheme and use trace_printf machinery some time.
- GIT_USE_LOOKUP from v1.5.6-rc0~134^2~1 (sha1-lookup: more memory
efficient search in sorted list of SHA-1, 2007-12-29) is about
trying an alternate implementation strategy rather than changing
semantics and it can be useful to compare performance with and
without it set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that test-lib sets $HOME to protect against pollution from user
settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test
suite any more. And as luck would have it, a quick code search
reveals no other users in the wild.
This patch does not affect GIT_CONFIG_NOSYSTEM, which is still
needed.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set GIT_ATTR_NOSYSTEM in test-lib to make tests more reliable in two
ways:
- an invalid GIT_ATTR_NOSYSTEM setting should not cause tests to fail
with "fatal: bad config value for 'GIT_ATTR_NOSYSTEM'".
- /etc/gitattributes should not change the outcome of tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After v0.99.7~99 (Retire support for old environment variables,
2005-09-09), there is no more need to unset a stray AUTHOR_NAME
variable that might have entered the test environment.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --first-parent --boundary $commit^..$commit" segfaults on a
merge commit since 8d2dfc4 (process_{tree,blob}: show objects without
buffering, 2009-04-10), as it tried to dereference a commit that was
discarded as UNINTERESTING without being parsed (hence lacking "tree").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning a p4 depot by default generates a single commit. The use
of the "@all" revision specifier instead tells git-p4 to import
all commits. Check to make sure both these invocations work as
expected.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split up the "could not %s %s... %s" message into "could not revert
%s... %s" and "could not apply %s... %s". This makes it easier for
translators to understand the message.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate the "Your local changes [...]" message without using the
`me' variable, instead split up the two messages so translators can
translate the whole messages as-is.
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "renamed: %s -> %s" message which appears as part of
git-status(1) output. Two tests in t4001-diff-rename.sh explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Initial commit" message. A test in t7501-commit.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "# Changes to be committed:" messages. Several tests
explicitly checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Since these tests didn't check for the rest of the git-status(1)
output this change has been split up from the "git-status basic
messages" patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "nothing to commit" messages. Many tests explicitly
checked for this message. Change them to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the most common git-status messages. Many tests checked for
these explicitly. Change them to skip under GETTEXT_POISON=YesPlease.
Some of the tests in t7508-status.sh needed to be split up when I
added C_LOCALE_OUTPUT to them, since parts of them affected later
tests (some of which aren't being skipped) indirectly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark the tag_template message as translatable with N_() and then use
it later with _(). We need to skip a test under GETTEXT_POISON that
relies on the output having a leading newline.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the ""Unstaged changes after reset:" message. A test in
t7102-reset.sh explicitly checked for this message. Change it to skip
under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Wonderful" message. A test in t7600-merge.sh
explicitly checked for this message. Change it to skip under
GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "You have not concluded your merge messages. A test in
t3030-merge-recursive.sh explicitly checked for this message. Change
it to skip the test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
