* tp/completion:
Fixup: Add bare repository indicator for __git_ps1
Add bare repository indicator for __git_ps1
completion: More fixes to prevent unbound variable errors
completion: Better __git_ps1 support when not in working directory
completion: Use consistent if [...] convention, not "test"
completion: For consistency, change "git rev-parse" to __gitdir calls
* js/branch-symref:
add basic branch display tests
branch: clean up repeated strlen
Avoid segfault with 'git branch' when the HEAD is detached
builtin-branch: improve output when displaying remote branches
Conflicts:
builtin-branch.c
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
The type 'off_t' should be used everywhere so that the bit-depth of that
type can be adjusted in the standard C library, and you just need to
recompile your program to benefit from the extended precision.
Only that it was not done that way in the MS runtime library.
This patch reroutes off_t to off64_t and provides the other necessary
changes so that finally, clones larger than 2 gigabyte work on Windows
(provided you are on a file system that allows files larger than 2gb).
Initial patch by Sickboy <sb@dev-heaven.net>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Including passing parameters to the programs, and running more
complicated checks without requiring a seperate shell script.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain remote commands, when asked to do something in a
particular directory that was not actually a git repository,
would say "unable to chdir or not a git archive". The
"chdir" bit is an unnecessary detail, and the term "git
archive" is much less common these days than "git repository".
So let's switch them all to:
fatal: '%s' does not appear to be a git repository
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like someone did 90% of the work, then forgot to actually use
the function in one place.
Also the helper function did not use the correct variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tell the user that a backup (original) already exists, and how to solve
this problem (with -f option)
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a comment that the web interface wraps the lines
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of people see this message for the first time on the gitweb
interface, where there is no clue as to what 'this file' means.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches "git rev-list --bisect-vars" to output an estimate
of the number of bisection step left _after the current one_ along with
the other variables it already outputs.
This patch also makes "git-bisect.sh" display this number of steps left
_after the current one_, along with the estimate of the number of
revisions left to test (after the current one).
Here is a table to help analyse what should be the best estimate for
the number of bisect steps left.
N : linear case --> probabilities --> best
-------------------------------------------------------------
1 : G-B --> 0 --> 0
2 : G-U1-B --> 0 --> 0
3 : G-U1-U2-B --> 0(1/3) 1(2/3) --> 1
4 : G-U1-U2-U3-B --> 1 --> 1
5 : G-U1-U2-U3-U4-B --> 1(3/5) 2(2/5) --> 1
6 : G-U1-U2-U3-U4-U5-B --> 1(2/6) 2(4/6) --> 2
7 : G-U1-U2-U3-U4-U5-U6-B --> 1(1/7) 2(6/7) --> 2
8 : G-U1-U2-U3-U4-U5-U6-U7-B --> 2 --> 2
9 : G-U1-U2-U3-U4-U5-U6-U7-U8-B --> 2(7/9) 3(2/9) --> 2
10: G-U1-U2-U3-U4-U5-U6-U7-U8-U9-B --> 2(6/10)3(4/10)--> 2
In the column "N", there is the number of revisions that could _now_
be the first bad commit we are looking for.
The "linear case" column describes the linear history corresponding to
the number in column N. G means good, B means bad, and Ux means
unknown. Note that the first bad revision we are looking for can be
any Ux or B.
In the "probabilities" column, there are the different outcomes in
number of steps with the odds of each outcome in parenthesis
corresponding to the linear case.
The "best" column gives the most accurate estimate among the different
outcomes in the "probabilities" column.
We have the following:
best(2^n) == n - 1
and for any x between 0 included and 2^n excluded, the probability for
n - 1 steps left looks like:
P(2^n + x) == (2^n - x) / (2^n + x)
and P(2^n + x) < 0.5 means 2^n < 3x
So the algorithm used in this patch calculates 2^n and x, and then
choose between returning n - 1 and n.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code that calls diff_setup(), including via init_revisions(), should later call
diff_setup_done(), possibly via setup_revisions(). Failure to do so could cause
errors, especially in the future when we add responsibilities to
diff_setup_done(). This instance causes no known errors with the present code.
But it resulted in an error with an experimental patch.
Signed-off-by: Keith Cascio <keith@cs.ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'git submodule add' normalize the submodule path in the
same way as 'git ls-files' does, so that 'git submodule init' looks up
the information in .gitmodules with the same key under which 'git
submodule add' stores it.
This fixes 4 known breakages.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add simple test cases for adding and initialising submodules. The
init step is necessary in order to verify the added information.
The second test exposes a known breakage due to './' in the path: git
ls-files simplifies the path but git add does not, which leads to git
init looking for different lines in .gitmodules than git add adds.
The other tests add test cases for '//' and '..' in the path which
currently fail for the same reason.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mental model for clone is that the branch is "checked
out" (and it even says this in Documentation/git-clone.txt:
"...creates and checks out an initial branch"). Therefore it
is reasonable for users to expect that any post-checkout
hook would be run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Forwards the --stat, --no-stat, and --summary options on to git-rebase.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email supports the --in-reply-to option even with
--no-thread. However, the code that adds the relevant mail headers
was guarded by a test for --thread.
Remove the test, so that the user's choice is respected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When memmem() was imported from glibc 2.2 into compat/, an optimization
was dropped in the process, in order to make the code smaller and simpler.
It was OK because memmem() wasn't used in performance-critical code. Now
the situation has changed and we can benefit from this optimization.
The trick is to avoid calling memcmp() if the first character of the needle
already doesn't match. Checking one character directly is much cheaper
than the function call overhead. We keep the first character of the needle
in the variable named point and the rest in the one named tail.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Windows Vista x64, before:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
And after the patch:
real 0m1.887s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use memmem() instead of open-coding it. The system libraries usually have a
much faster version than the memcmp()-loop here. Even our own fall-back in
compat/, which is used on Windows, is slightly faster.
The following commands were run in a Linux kernel repository and timed, the
best of five results is shown:
$ STRING='Ensure that the real time constraints are schedulable.'
$ git log -S"$STRING" HEAD -- kernel/sched.c >/dev/null
On Ubuntu 8.10 x64, before (v1.6.2-rc2):
8.09user 0.04system 0:08.14elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30952minor)pagefaults 0swaps
And with the patch:
1.50user 0.04system 0:01.54elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+30645minor)pagefaults 0swaps
On Fedora 10 x64, before:
8.34user 0.05system 0:08.39elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+29268minor)pagefaults 0swaps
And with the patch:
1.15user 0.05system 0:01.20elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+0outputs (0major+32253minor)pagefaults 0swaps
On Windows Vista x64, before:
real 0m9.204s
user 0m0.000s
sys 0m0.000s
And with the patch:
real 0m8.470s
user 0m0.000s
sys 0m0.000s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Short story: There is a section in t3400 that tests fundamental rebase
properties. 3ec7371f (Add two extra tests for git rebase, 2009-02-09)
added a check that rebase works on a detached HEAD, but the test was put
near the end of the file. This moves it to a more suitable place.
Long story: The test that preceded the one in question tests that a
rebased commit degrades from a content change with mode change to a
mere mode change. But on Windows, where we have core.filemode=false,
the original commit did not record the mode change, and so the rebase
operation did not rebase anything. This caused the subsequent detached
HEAD test to fail.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue reported by Johannes Sixt on the git mailing list:
> This recipe sends gitk into an endless loop. In git.git do:
>
> cd t
> # remove chmod a+x A near the end of the file
> sed -i 's/chmod/: chmod/' t3400-rebase.sh
> sh t3400-rebase.sh --debug
> cd trash\ directory.t3400-rebase/
> gitk master modechange modechange@{1}
>
>
> I briefly see the history chart, but the dot that should be modechange@{1}
> is missing. One automatically selected commit is shown in the diff section
> below. But then the commit list is cleared and gitk goes into an infinite
> loop.
>
> Things work alright if either modechange@{1} is dropped, or the 'chmod'
> line is left unchanged, which is a bit strange.
>
> This is with git version 1.6.1.2.390.gba743
There were actually two problems. This recipe created a situation where
git log would output a child commit after its parent. This meant that
we called fix_reversal which called splitvarc, which should call modify_arc
to note the fact that it has modified the arc that it has just split. It
wasn't, which meant that displayorder and other variables got into an
inconsistent state (a commit appearing twice in displayorder).
This then meant that the targetrow/targetid logic in drawvisible thought
it need to redraw each time. That, together with the fact that drawvisible
called drawcommits which called drawvisible if a redraw was needed, led
to the infinite loop.
In fact drawvisible is now the only caller of drawcommits. Thus, the
start and end row arguments to drawcommits always encompass the whole
visible area, so drawcommits doesn't need to call drawvisible to redraw;
it just needs to clear the screen and draw what it's been asked to.
This fixes these two problems by adding a call to modify_arc in
splitvarc and by taking out the call to drawvisible in drawcommits.
It also removes an unrelated left-over debugging puts in external_blame.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Call setup_git_directory() before git_config() to make sure git_dir is set
to the proper value.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
