Before implementing a way to fetch bundles into a repository, create the
basic logic. Assume that the URI is actually a file path. Future logic
will make this more careful to other protocols.
For now, we also only succeed if the content at the URI is a bundle
file, not a bundle list. Bundle lists will be implemented in a future
change.
Note that the discovery of a temporary filename is slightly racy because
the odb_mkstemp() relies on the temporary file not existing. With the
current implementation being limited to file copies, we could replace
the copy_file() with copy_fd(). The tricky part comes in future changes
that send the filename to 'git remote-https' and its 'get' capability.
At that point, we need the file descriptor closed _and_ the file
unlinked. If we were to keep the file descriptor open for the sake of
normal file copies, then we would pollute the rest of the code for
little benefit. This is especially the case because we expect that most
bundle URI use will be based on HTTPS instead of file copies.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future change will want a way to download a file over HTTP(S) using
the simplest of download mechanisms. We do not want to assume that the
server on the other side understands anything about the Git protocol but
could be a simple static web server.
Create the new 'get' capability for the remote helpers which advertises
that the 'get' command is avalable. A caller can send a line containing
'get <url> <path>' to download the file at <url> into the file at
<path>.
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change introduced the bundle URI design document. It
creates a flexible set of options that allow bundle providers many ways
to organize Git object data and speed up clones and fetches. It is
particularly important that we have flexibility so we can apply future
advancements as new ideas for efficiently organizing Git data are
discovered.
However, the design document does not provide even an example of how
bundles could be organized, and that makes it difficult to envision how
the feature should work at the end of the implementation plan.
Add a section that details how a bundle provider could work, including
using the Git server advertisement for multiple geo-distributed servers.
This organization is based on the GVFS Cache Servers which have
successfully used similar ideas to provide fast object access and
reduced server load for very large repositories.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the idea of bundle URIs to the Git codebase through an
aspirational design document. This document includes the full design
intended to include the feature in its fully-implemented form. This will
take several steps as detailed in the Implementation Plan section.
By committing this document now, it can be used to motivate changes
necessary to reach these final goals. The design can still be altered as
new information is discovered.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we wrap the tabdo command there's no need for a separate command
call.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Layouts with a single window other than "MERGED" do not work (e.g.
"LOCAL" or "MERGED+LOCAL").
This is because as the documentation of bufdo says:
The last buffer (or where an error occurred) becomes the current
buffer.
And we do always do bufdo the end.
Additionally, we do it only once, when it should be per tab.
Fix this by doing it once per tab right after it's created and before
any buffer is switched.
Cc: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we treat tabs especially, the logic becomes much simpler.
Cc: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diffopt has hiddenoff set and there's only one window (as is the
case in the single window mode) the diff mode is turned off.
We don't want that, so turn that option off.
Cc: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the single window mode we are greeted with the following
warning:
"./content_LOCAL_8975" 6L, 28B
"./content_BASE_8975" 6 lines, 29 bytes
"./content_REMOTE_8975" 6 lines, 29 bytes
"content" 16 lines, 115 bytes
Press ENTER or type command to continue
every time.
Silence that.
Suggested-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When vimdiff3 was added in 7c147b77d3 (mergetools: add vimdiff3 mode,
2014-04-20), the description made clear the intention:
It's similar to the default, except that the other windows are
hidden. This ensures that removed/added colors are still visible on
the main merge window, but the other windows not visible.
However, in 0041797449 (vimdiff: new implementation with layout support,
2022-03-30) this was broken by generating a command that never creates
windows, and therefore vim never shows the diff.
The layout support implementation broke the whole purpose of vimdiff3,
and simply shows MERGED, which is no different from simply opening the
file with vim.
In order to show the diff, the windows need to be created first, and
then when they are hidden the diff remains (if hidenoff isn't set), but
by setting the `hidden` option the initial buffers are marked as hidden
thus making the feature work.
Suggested-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the variable is wrong, and it can be set to anything, like
1.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Reviewed-by: Fernando Ramos <greenfoo@u92.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bug report
https://lore.kernel.org/git/AM0PR02MB56357CC96B702244F3271014E8DC9@AM0PR02MB5635.eurprd02.prod.outlook.com/
noted that a file containing /r/r/n needed renormalising twice.
This is by design. Lone CR characters, not paired with an LF, are left
unchanged. Note this limitation of the "clean" filter in the documentation.
Renormalize was introduced at 9472935d81 (add: introduce "--renormalize",
Torsten Bögershausen, 2017-11-16)
Signed-off-by: Philip Oakley <philipoakley@iee.email>
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable the sparse index within the `git-rm` command.
The `p2000` tests demonstrate a ~92% execution time reduction for
'git rm' using a sparse index.
Test HEAD~1 HEAD
--------------------------------------------------------------------------
2000.74: git rm ... (full-v3) 0.41(0.37+0.05) 0.43(0.36+0.07) +4.9%
2000.75: git rm ... (full-v4) 0.38(0.34+0.05) 0.39(0.35+0.05) +2.6%
2000.76: git rm ... (sparse-v3) 0.57(0.56+0.01) 0.05(0.05+0.00) -91.2%
2000.77: git rm ... (sparse-v4) 0.57(0.55+0.02) 0.03(0.03+0.00) -94.7%
----
Also, normalize a behavioral difference of `git-rm` under sparse-index.
See related discussion [1].
`git-rm` a sparse-directory entry within a sparse-index enabled repo
behaves differently from a sparse directory within a sparse-checkout
enabled repo.
For example, in a sparse-index repo, where 'folder1' is a
sparse-directory entry, `git rm -r --sparse folder1` provides this:
rm 'folder1/'
Whereas in a sparse-checkout repo *without* sparse-index, doing so
provides this:
rm 'folder1/0/0/0'
rm 'folder1/0/1'
rm 'folder1/a'
Because `git rm` a sparse-directory entry does not need to expand the
index, therefore we should accept the current behavior, which is faster
than "expand the sparse-directory entry to match the sparse-checkout
situation".
Modify a previous test so such difference is not considered as an error.
[1] https://github.com/ffyuanda/git/pull/6#discussion_r934861398
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the `ensure_full_index()` method so `git-rm` does not always
expand the index when the expansion is unnecessary, i.e. when
<pathspec> does not have any possibilities to match anything outside
of sparse-checkout definition.
Expand the index when the <pathspec> needs an expanded index, i.e. the
<pathspec> contains wildcard that may need a full-index or the
<pathspec> is simply outside of sparse-checkout definition.
Notice that the test 'rm pathspec expands index when necessary' in
t1092 *is* testing this code change behavior, though it will be marked
as 'test_expect_success' only in the next patch, where we officially
mark `command_requires_full_index = 0`, so the index does not expand
unless we tell it to do so.
Notice that because we also want `ensure_full_index` to record the
stdout and stderr from Git command, a corresponding modification
is also included in this patch. The reason we want the "sparse-index-out"
and "sparse-index-err", is that we need to make sure there is no error
from Git command itself, so we can rely on the `test_region` result
and determine if the index is expanded or not.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Method pathspec_needs_expanded_index() in reset.c from 4d1cfc1351
(reset: make --mixed sparse-aware, 2021-11-29) is reusable when we
need to verify if the index needs to be expanded when the command
is utilizing a pathspec rather than a literal path.
Move it to pathspec.h for reusability.
Add a few items to the function so it can better serve its purpose as
a standalone public function:
* Add a check in front so if the index is not sparse, return early since
no expansion is needed.
* It now takes an arbitrary 'struct index_state' pointer instead of
using `the_index` and `active_cache`.
* Add documentation to the function.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for `git-rm`, make sure it behaves as expected when
<pathspec> is both inside or outside of sparse-checkout definition.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'unpack_single_entry()' is unpacking a new directory tree (that is, one
not already present in the index) into a sparse index, unpack the tree as a
sparse directory rather than traversing its contents and unpacking each file
individually. This helps keep the sparse index as collapsed as possible in
cases such as 'git reset --hard' restoring a outside-of-cone directory
removed with 'git rm -r --sparse'.
Without this patch, 'unpack_single_entry()' will only unpack a directory
into the index as a sparse directory (rather than traversing into it and
unpacking its files one-by-one) if an entry with the same name already
exists in the index. This patch allows sparse directory unpacking without a
matching index entry when the following conditions are met:
1. the directory's path is outside the sparse cone, and
2. there are no children of the directory in the index
If a directory meets these requirements (as determined by
'is_new_sparse_dir()'), 'unpack_single_entry()' unpacks the sparse directory
index entry and propagates the decision back up to 'unpack_callback()' to
prevent unnecessary tree traversal into the unpacked directory.
Reported-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'index_name_pos_sparse()', which behaves the same as 'index_name_pos()',
except that it does not expand a sparse index to search for an entry inside
a sparse directory.
'index_entry_exists()' was originally implemented in 20ec2d034c (reset: make
sparse-aware (except --mixed), 2021-11-29) as an alternative to
'index_name_pos()' to allow callers to search for an index entry without
expanding a sparse index. However, that particular use case only required
knowing whether the requested entry existed, so 'index_entry_exists()' does
not return the index positioning information provided by 'index_name_pos()'.
This patch implements 'index_name_pos_sparse()' to accommodate callers that
need the positioning information of 'index_name_pos()', but do not want to
expand the index.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update 'do_oneway_diff()' to perform a 'diff_tree_oid()' on removed sparse
directories, as it does for added or modified sparse directories (see
9eb00af562 (diff-lib: handle index diffs with sparse dirs, 2021-07-14)).
At the moment, this update is unreachable code because 'unpack_trees()'
(currently the only way 'oneway_diff()' can be called, via 'diff_cache()')
will always traverse trees down to the individual removed files of a deleted
sparse directory. A subsequent patch will change this to better preserve a
sparse index in other uses of 'unpack_tree()', e.g. 'git reset --hard'.
However, making that change without this patch would result in (among other
issues) 'git status' printing only the name of a deleted sparse directory,
not its contents. To avoid introducing that bug, 'do_oneway_diff()' is
updated before modifying 'unpack_trees()'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the 'recursive' diff flag to the local changes reporting done by 'git
checkout' in 'show_local_changes()'. Without the flag enabled, unexpanded
sparse directories will not be recursed into to report the diff of each
file's contents, resulting in the reported local changes including
"modified" sparse directories.
The same issue was found and fixed for 'git status' in 2c521b0e49 (status:
fix nested sparse directory diff in sparse index, 2022-03-01)
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plug memory leaks in the failure code path in the "merge-ort" merge
strategy backend.
* js/ort-clean-up-after-failed-merge:
merge-ort: do leave trace2 region even if checkout fails
merge-ort: clean up after failed merge
Older gcc with -Wall complains about the universal zero initializer
"struct s = { 0 };" idiom, which makes developers' lives
inconvenient (as -Werror is enabled by DEVELOPER=YesPlease). The
build procedure has been tweaked to help these compilers.
* jk/struct-zero-init-with-older-gcc:
config.mak.dev: squelch -Wno-missing-braces for older gcc
Some tests assumed that core.fsyncMethod=batch is supported
everywhere, which broke FreeBSD.
* js/t5351-freebsd-fix:
t5351: avoid using `test_cmp` for binary data
t5351: avoid relying on `core.fsyncMethod = batch` to be supported
Conditionally allow building Python interpreter on Windows
* js/mingw-with-python:
mingw: remove unneeded `NO_CURL` directive
mingw: remove unneeded `NO_GETTEXT` directive
windows: include the Python bits when building Git for Windows
Fix build procedure for Windows that uses CMake so that it can pick
up the shell interpreter from local installation location.
* ca/unignore-local-installation-on-windows:
cmake: support local installations of git
When an Administrator creates a file or directory, the created
file/directory is owned not by the Administrator SID, but by the
_Administrators Group_ SID. The reason is that users with administrator
privileges usually run in unprivileged ("non-elevated") mode, and their
user SID does not change when running in elevated mode.
This is is relevant e.g. when running a GitHub workflow on a build
agent, which runs in elevated mode: cloning a Git repository in a script
step will cause the worktree to be owned by the Administrators Group
SID, for example.
Let's handle this case as following: if the current user is an
administrator, Git should consider a worktree owned by the
Administrators Group as if it were owned by said user.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FAT file system has no concept of ACLs. Therefore, it cannot store
any ownership information anyway, and the `GetNamedSecurityInfoW()` call
pretends that everything is owned "by the world".
Let's special-case that scenario and tell the user what's going on.
This addresses https://github.com/git-for-windows/git/issues/3886
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git refuses to use an existing repository because it is owned by
someone else than the current user, it can be a bit tricky on Windows to
figure out what is going on.
Let's help with that by providing more detailed information.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When verifying the ownership of the Git directory, we sometimes would
like to say a bit more about it, e.g. when using a platform-dependent
code path (think: Windows has the permission model that is so different
from Unix'), but only when it is a appropriate to actually say
something.
To allow for that, collect that information and hand it back to the
caller (whose responsibility it is to show it or not).
Note: We do not actually fill in any platform-dependent information yet,
this commit just adds the infrastructure to be able to do so.
Based-on-an-idea-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for touching code that was introduced in 3b0bf27049
(setup: tighten ownership checks post CVE-2022-24765, 2022-05-10) and
that was formatted differently than preferred in the Git project, fix
the indentation before actually modifying the code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Operating modes like "--batch" of "git cat-file" command learned to
take NUL-terminated input, instead of one-item-per-line.
* tb/cat-file-z:
builtin/cat-file.c: support NUL-delimited input with `-z`
t1006: extract --batch-command inputs to variables
"git fetch" client logs the partial clone filter used in the trace2
output.
* jt/fetch-pack-trace2-filter-spec:
fetch-pack: write effective filter to trace2
Gitweb had legacy URL shortener that is specific to the way
projects hosted on kernel.org used to (but no longer) work, which
has been removed.
* jr/gitweb-title-shortening:
gitweb: remove title shortening heuristics
Workaround for a compiler warning against use of die() in
osx-keychain (in contrib/).
source: <pull.1293.git.1658251503775.gitgitgadget@gmail.com>
* ld/osx-keychain-usage-fix:
osx-keychain: fix compiler warning
Add missing documentation for "include" and "includeIf" features in
"git config" file format, which incidentally teaches the command
line completion to include them in its offerings.
source: <pull.1285.v2.git.1658002423864.gitgitgadget@gmail.com>
* mb/config-document-include:
config.txt: document include, includeIf
mkstemp() emulation on Windows has been improved.
source: <7265e37f-fd29-3579-b840-19a1df52a59f@web.de>
* rs/mingw-tighten-mkstemp:
mingw: avoid mktemp() in mkstemp() implementation
"git clone" from a repository with some ref whose HEAD is unborn
did not set the HEAD in the resulting repository correctly, which
has been corrected.
source: <YsdyLS4UFzj0j/wB@coredump.intra.peff.net>
* jk/clone-unborn-confusion:
clone: move unborn head creation to update_head()
clone: use remote branch if it matches default HEAD
clone: propagate empty remote HEAD even with other branches
clone: drop extra newline from warning message
The "refs/prefetch/" namespace is used by 'git fetch --prefetch' as a
replacement of the destination of the refpsec for a remote. Git also
removes refspecs that include tags.
Instead of using string literals for the 'refs/tags/ and
'refs/prefetch/' namespaces, use the entries in the ref_namespaces
array.
This kind of change could be done in many places around the codebase,
but we are isolating only to this change because of the way the
refs/prefetch/ namespace somewhat motivated the creation of the
ref_namespaces array.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 96eaffebbf (maintenance: set
log.excludeDecoration durin prefetch, 2021-01-19).
The previous change created a default decoration filter that does not
include refs/prefetch/, so this modification of the config is no longer
needed.
One issue that can happen from this point on is that users who ran the
prefetch task on previous versions of Git will still have a
log.excludeDecoration value and that will prevent the new default
decoration filter from being active. Thus, when we add the refs/bundle/
namespace as part of the bundle URI feature, those users will see
refs/bundle/ decorations.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
