Porcelain scripts written in Perl are getting internationalized.
* va/i18n-perl-scripts:
i18n: difftool: mark warnings for translation
i18n: send-email: mark composing message for translation
i18n: send-email: mark string with interpolation for translation
i18n: send-email: mark warnings and errors for translation
i18n: send-email: mark strings for translation
i18n: add--interactive: mark status words for translation
i18n: add--interactive: remove %patch_modes entries
i18n: add--interactive: mark edit_hunk_manually message for translation
i18n: add--interactive: i18n of help_patch_cmd
i18n: add--interactive: mark patch prompt for translation
i18n: add--interactive: mark plural strings
i18n: clean.c: match string with git-add--interactive.perl
i18n: add--interactive: mark strings with interpolation for translation
i18n: add--interactive: mark simple here-documents for translation
i18n: add--interactive: mark strings for translation
Git.pm: add subroutines for commenting lines
"git send-email" attempts to pick up valid e-mails from the
trailers, but people in real world write non-addresses there, like
"Cc: Stable <add@re.ss> # 4.8+", which broke the output depending
on the availability and vintage of Mail::Address perl module.
* mm/send-email-cc-cruft-after-address:
Git.pm: add comment pointing to t9000
t9000-addresses: update expected results after fix
parse_mailboxes: accept extra text after <...> address
parse_mailboxes should probably eventually be completely equivalent to
Mail::Address, and if this happens we can drop the Mail::Address
dependency. Add a comment in the code reminding the current state of the
code, and point to the corresponding failing test to help future
contributors to get it right.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test introduced in this commit succeeds without the patch to Git.pm
if Mail::Address is installed, but fails otherwise because our in-house
parser does not accept any text after the email address. They succeed
both with and without Mail::Address after this commit.
Mail::Address accepts extra text and considers it as part of the name,
iff the address is surrounded with <...>. The implementation mimics
this behavior as closely as possible.
This mostly restores the behavior we had before b1c8a11 (send-email:
allow multiple emails using --cc, --to and --bcc, 2015-06-30), but we
keep the possibility to handle comma-separated lists.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reducing the scope of where we change the record separator ($/)
avoids bugs in calls which rely on the input record separator
further down, such as the 'chomp' usage in command_oneline.
This is necessary for a future change to git-svn, but exists in
Git.pm since it seems useful for gitweb and our other Perl
scripts, too.
Signed-off-by: Eric Wong <e@80x24.org>
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, absolute paths never start with a slash, unless a POSIX
emulation layer is used. The latter is the case for MSYS2's Perl that
Git for Windows leverages. However, in the tests we also go through
plain `git.exe`, which does *not* leverage the POSIX emulation layer,
and therefore the paths we pass to Perl may actually be DOS-style paths
such as C:/Program Files/Git.
So let's just use Perl's own way to test whether a given path is
absolute or not instead of home-brewing our own.
This patch partially fixes t7800 and t9700 when running in Git for
Windows' SDK.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_address_line had not the same behavior whether the user had
Mail::Address or not. Teach parse_address_line to behave like
Mail::Address.
When the user input is correct, this implementation behaves
exactly like Mail::Address except when there are quotes
inside the name:
"Jane Do"e <jdoe@example.com>
In this case the result of parse_address_line is:
With M::A : "Jane Do" e <jdoe@example.com>
Without : "Jane Do e" <jdoe@example.com>
When the user input is not correct, the behavior is also mostly
the same.
Unlike Mail::Address, this doesn't parse groups and recursive
commentaries.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should help me track down errors in git-svn more easily:
write .git/Git_XXXXXX: Bad file descriptor
at /usr/lib/perl5/SVN/Ra.pm line 623
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When the temp_is_locked function was introduced, there was
a desire to make _temp_cache use it. Unfortunately due to the
various tests and logic flow involved changing the _temp_cache
function to use the new temp_is_locked function is problematic
as _temp_cache needs a slightly different test than is provided
by the temp_is_locked function.
This change reverts use of temp_is_locked in the _temp_cache
function and restores the original code that existed there
before the temp_is_locked function was added.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The temp_is_locked function can be used to determine whether
or not a given name previously passed to temp_acquire is
currently locked.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call File::Temp's "tempfile" function as a class method, but it was
never designed to be called this way. Older versions seemed to
tolerate it, but as of File::Temp 0.23, it blows up like this:
$ git svn fetch
'tempfile' can't be called as a method at .../Git.pm line 1117.
Fix it by calling it as a regular function, just inside the File::Temp
namespace.
Signed-off-by: H. Merijn Brand <h.m.brand@xs4all.nl>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Closing (not redirecting to /dev/null) the standard error stream is
not a very smart thing to do. Later open may return file
descriptor #2 for unrelated purpose, and error reporting code may
write into them.
* tr/perl-keep-stderr-open:
t9700: do not close STDERR
perl: redirect stderr to /dev/null instead of closing
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On my system, t9100.1 triggers the following warning:
==352== Syscall param write(buf) points to uninitialised byte(s)
==352== at 0x57119C0: __write_nocancel (in /lib64/libc-2.17.so)
==352== by 0x56AC1D2: _IO_file_write@@GLIBC_2.2.5 (in /lib64/libc-2.17.so)
==352== by 0x56AC0B1: new_do_write (in /lib64/libc-2.17.so)
==352== by 0x56AD3B4: _IO_do_write@@GLIBC_2.2.5 (in /lib64/libc-2.17.so)
==352== by 0x56AD6FE: _IO_file_overflow@@GLIBC_2.2.5 (in /lib64/libc-2.17.so)
==352== by 0x56AE3D8: _IO_default_xsputn (in /lib64/libc-2.17.so)
==352== by 0x56ACAA2: _IO_file_xsputn@@GLIBC_2.2.5 (in /lib64/libc-2.17.so)
==352== by 0x5682133: buffered_vfprintf (in /lib64/libc-2.17.so)
==352== by 0x567CE9D: vfprintf (in /lib64/libc-2.17.so)
==352== by 0x5687096: fprintf (in /lib64/libc-2.17.so)
==352== by 0x4E7AC5: vreportf (usage.c:15)
==352== by 0x4E7B14: die_builtin (usage.c:38)
The actual complaint appears to be a bug in the underlying
implementation. What's interesting here is that it is apparently
_triggered_ by closing stderr, which results in (from strace)
write(2, "fatal: Needed a single revision\n", 32) = -1 EBADF (Bad file descriptor)
write(2, "\0", 1) = -1 EBADF (Bad file descriptor)
Closing stderr is a bad idea anyway: there is a very real chance that
we print fatal error messages to some other file that just happens to
be opened on the now-free FD 2. So let's not do that.
As pointed out by Eric Wong (thanks), the initial close needs to go:
die() would again write nowhere if we close STDERR beforehand.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
perl/Git.pm::cat_blob slurped everything in core only to write it
out to a file descriptor, which was not a very smart thing to do.
* jc/perl-cat-blob:
Git.pm: fix cat_blob crashes on large files
Hooks the credential system to send-email.
* mn/send-email-works-with-credential:
git-send-email: use git credential to obtain password
Git.pm: add interface for git credential command
Git.pm: allow pipes to be closed prior to calling command_close_bidi_pipe
Git.pm: refactor command_close_bidi_pipe to use _cmd_close
Git.pm: fix example in command_close_bidi_pipe documentation
Git.pm: allow command_close_bidi_pipe to be called as method
perl/Git.pm::cat_blob slurped everything in core only to write it
out to a file descriptor, which was not a very smart thing to do.
* jc/perl-cat-blob:
Git.pm: fix cat_blob crashes on large files
Add a credential() function which is an interface to the git
credential command. The code is heavily based on credential_*
functions in <contrib/mw-to-git/git-remote-mediawiki>.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read and write each 1024 byte buffer, rather than trying to buffer
the entire content of the file. We are only copying the contents to
a file descriptor and do not use it ourselves.
Previous code would crash on all files > 2 Gib, when the offset
variable became negative (perhaps below the level of perl),
resulting in a crash. On a 32 bit system, or a system with low
memory it might crash before reaching 2 GiB due to memory
exhaustion.
This code may leave a partial file behind in case of failure, where
the old code would leave a completely empty file. Neither version
verifies the correctness of the content. Calling code must take
care of verification and cleanup.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command_close_bidi_pipe() function will insist on closing both
input and output pipes returned by command_bidi_pipe(). With this
change it is possible to close one of the pipes in advance and pass
undef as an argument.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The body of the loop in command_close_bidi_pipe sub is identical to
what _cmd_close sub does.
Instead of duplicating, refactor _cmd_close so that it accepts a
list of file handles to be closed, which makes it usable with
command_close_bidi_pipe.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passed a local time that was on the boundary of a DST change,
get_tz_offset returned a GMT offset that was incorrect (off by one
hour). This is because the time was converted to GMT and then back to
a time stamp via timelocal() which cannot disambiguate boundary cases
as noted in its documentation.
Modify this algorithm, using an approach suggested in
http://article.gmane.org/gmane.comp.version-control.git/213871
to first convert the timestamp in question to two broken down forms
with localtime() and gmtime(), and then compute what timestamps
these two broken down forms would represent in GMT (i.e. a timezone
that does not have DST issues) by applying timegm() on them. The
difference between the resulting timestamps is the timezone offset.
This avoids the ambigious conversion and allows a correct time to be
returned on every occassion.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function has utility outside of the SVN module for any routine
that needs the equivalent of GNU strftime's %z formatting option.
Move it to the top-level Git.pm so that non-SVN modules don't need to
import the SVN module to use it.
The rename makes the purpose of the function clearer.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
File handle goes as the first argument when calling print on it.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of command_close_bidi_pipe() claims that it can
be called as a method, but it does not check whether the first
argument is $self or not assuming the latter. Using _maybe_self()
fixes this.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn reads usernames and other user queries from an interactive
terminal. This cause GUIs (w/o STDIN connected) to hang waiting forever
for git-svn to complete (http://code.google.com/p/tortoisegit/issues/detail?id=967).
This change extends the Git::prompt helper, so that it can also be used
for non password queries, and makes use of it instead of using
hand-rolled prompt-response code that only works with the interactive
terminal.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_ASKPASS environment variable is not set, git-svn does not try to use
SSH_ASKPASS as git-core does. This change adds a fallback to SSH_ASKPASS.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn reads passwords from an interactive terminal or by using
GIT_ASKPASS helper tool. This cause GUIs (w/o STDIN connected) to hang
waiting forever for git-svn to complete
(http://code.google.com/p/tortoisegit/issues/detail?id=967).
Commit 56a853b62c also tried to solve
this issue, but was incomplete as described above.
Instead of using hand-rolled prompt-response code that only works with the
interactive terminal, a reusable prompt() method is introduced in this commit.
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move common parts of Git::config(), Git::config_bool(), Git::config_int()
and Git::config_path() into _config_common() helper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use --path option when calling 'git config' thus allow for pathname
expansion, e.g. a tilde.
Signed-off-by: Cord Seele <cowose@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When command_input_pipe and command_output_pipe are used as a
method of a Git::repository instance, they eventually call into
_cmd_exec method that sets up the execution environment such as
GIT_DIR, GIT_WORK_TREE environment variables and the current
working directory in the child process that interacts with the
repository.
command_bidi_pipe however didn't expect to be called as such, and
lacked all these set-up. Because of this, a program that did this
did not work as expected:
my $repo = Git->repository(Directory => '/some/where/else');
my ($pid, $in, $out, $ctx) =
$repo->command_bidi_pipe(qw(hash-object -w --stdin-paths));
This patch refactors the _cmd_exec into _setup_git_cmd_env that
sets up the execution environment, and makes _cmd_exec and
command_bidi_pipe to use it.
Note that unlike _cmd_exec that execv's a git command as an
external process, command_bidi_pipe is called from the main line
of control, and the execution environment needs to be restored
after open2() does its magic.
Signed-off-by: Masatake Osanai <unpush@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide the bad directory name alongside with $!
Note: $! is set if there is "No such file or directory",
but isn't set if the file exists but is not a directory.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before commit d3c9634e, performing a "git svn rebase" that fetched a
change containing CRLFs corrupted the git-svn meta-data. This was
worked around in d3c9634e by setting core.autocrlf to "false" in the
per-repo config when initing the clone. However, if the config
variable was later changed, the corruption would still occur.
This patch tries to fix it while allowing core.autocrlf to be
enabled, by disabling filters when when hashing.
git-svn is currently the only call-site for hash_and_insert_object
(apart from the test-suite), so changing it should be safe.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
So far we only set it to absolute paths in some cases which lead
to problems like wc_chdir not working.
Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise git will use the current directory as work tree which will
lead to unexpected results if we operate in sub directory of the
work tree.
Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message to Error::Simple() must be passed as a single argument.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository constructor mistakenly rewrote a Directory parameter that
Perl happens to evaluate to false (e.g. "0") to ".".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unify all
fatal: Not a git repository
error messages so they include path information.
Signed-off-by: Richard Hartmann <richih@net.in.tum.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
