The old wording was somehow implying that <start> and <end> were not
regular expressions. Also, the common case is to use a plain function
name here so <funcname> makes sense (the fact that it is a regular
expression is documented in line-range-format.txt).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- typeset options, commands, and paths in monospace;
- typeset references to sections with emphasis;
- replace some double quotes with proper AsciiDoc quotes (e.g. ``foo'');
- use title case when referring to section headings.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"--log-size" was added in commit 9fa3465, and the commit message
contained a satisfactory explanation; however, the man page entry
for it did not describe the actual output format, what the output
meant and what the option was meant to be used for.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
blame/log documentation describes -L option as:
-L<start>,<end>
-L:<regex>
<start> and <end> can take one of these forms:
* number
* /regex/
* +offset or -offset
* :regex
which is incorrect and confusing since :regex is not one of the valid
forms of <start> or <end>; in fact, it must be -L's lone argument.
Clarify by discussing :<regex> at the same indentation level as "<start>
and <end>...":
-L<start>,<end>
-L:<regex>
<start> and <end> can take one of these forms:
* number
* /regex/
* +offset or -offset
If :<regex> is given in place of <start> and <end> ...
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Standard practice in Git documentation is for each variation of an
option (such as: -p / --porcelain) to be placed on its own line in the
OPTIONS table. The -L option does not follow suit. It cuddles "-L
<start>,<end>:<file>" and "-L :<regex>:<file>", separated by a comma.
This is inconsistent and potentially confusing since the comma
separating them is typeset the same as the comma in "<start>,<end>". Fix
this by placing each variation on its own line.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git show -s" was less discoverable than it should be.
* mm/diff-no-patch-synonym-to-s:
Documentation/git-log.txt: capitalize section names
Documentation: move description of -s, --no-patch to diff-options.txt
Documentation/git-show.txt: include common diff options, like git-log.txt
diff: allow --patch & cie to override -s/--no-patch
diff: allow --no-patch as synonym for -s
t4000-diff-format.sh: modernize style
This is the convention in most other files and even at the beginning of
git-log.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All surrounding examples are typeset as monospaced text. Follow suit.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation and some comments still refer to files in builtin/
as 'builtin-*.[cho]'. Update these to show the correct location.
Signed-off-by: Phil Hord <hordp@cisco.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Assisted-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
This option is a remnant of an earlier log -L version, and not
currently implemented. Remove it until (if at all) it is implemented
again.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In its current form, the note talks about separating options from
"branch names" and "refnames" in the same sentence. This is entirely
inaccurate, as <revision range> need not be a set of branch names or
ref names. Rewrite it to use the word "revision range", to be
consistent with the SYNOPSIS.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'<since>..<until>' is misleading, as there are many other forms that
'git log' can accept as an argument. Replace it with <revision range>,
referring to the section "Specifying Ranges" in revisions.txt, and
rewrite the section appropriately.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section lists <since>..<until> as the first item, but this
is inconsistent with the ordering in SYNOPSIS. Move it down until it
appears just before [[--] <path>...].
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second paragraph of the added description for the -L option
"<start> and <end> can take one of these forms:", and the list of
forms that follow the headline, were indented one level too short,
due to the missing "+" to signal that the next paragraph continues
the previous one.
Also "You can specify this option more than once" is about the -L
option, not about its various forms of starting and ending points.
Move it to the end of the main text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new syntax finds a funcname matching /pattern/, and then takes from there
up to (but not including) the next funcname. So you can say
git log -L:main:main.c
and it will dig up the main() function and show its line-log, provided
there are no other funcnames matching 'main'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
Add the --use-mailmap option to log commands. It allows to display
names from mailmap file when displaying logs, whatever the format
used.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anywhere we mention mailmap.file, it is probably worth
mentioning mailmap.blob, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list-options.txt is included in git-rev-list.txt. This makes sure
rev-list man page also shows that, and at one place, together with
equivalent options -n and --max-count.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log -- <path>' does not "show commits that affect the specified
paths" in a literal sense unless --full-history is given (for example,
a file that only existed on a side branch will turn up no commits at
all!).
Reword it to specify the actual intent of the filtering, and point to
the "History Simplification" section.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many examples of git command invocation are given in asciidoc listing
blocks, which makes them monospaced and avoids further interpretation of
special characters. Some manpages make a list of examples, like:
git foo::
Run git foo.
git foo -q::
Use the "-q" option.
to quickly show many variants. However, they can sometimes be hard to
read, because they are shown in a proportional-width font (so, for
example, seeing the difference between "-- foo" and "--foo" can be
difficult).
This patch puts all such examples into backticks, which gives the
equivalent formatting to a listing block (i.e., monospaced and without
character interpretation).
As a bonus, this also fixes an example in the git-push manpage, in which
"git push origin :::" was accidentally considered a newly-indented list,
and not a list item with "git push origin :" in it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the behavior or the new --notes, --notes=<ref> and --no-notes
options, and list --show-notes[=<ref>] and --[no-]standard-notes options
as deprecated.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-n-reverse-doc:
git-log.txt,rev-list-options.txt: put option blocks in proper order
git-log.txt,rev-list-options.txt: -n/--max-count is commit limiting
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
Match the order of the description to the one in which they get applied:
commit limiting
commit ordering
commit formatting
diff options
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are applied after commit ordering and formatting options, in
particular --reverse.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current description gives the impression that "--full-diff" affects
"log -p" only.
Make it clearer that it affects all diff-based output types.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will reduce considerably the common confusion where people miss the
`--follow' option, and wonder why `-M'/`-C' is not working.
* Move the diff options include to after the log-specific flags, and add
a "Common diff options" subtitle before them. (These options apply
only when patches are shown, which is not a common use case among
newbies, so having them first is confusing.)
* Move the `--follow' description to the top of the listed options. The
options before that seem less important: `--full-diff' applies only
when patches are shown, `--source' and `--decorate' are less useful
with many common commit specifications.
* Clarify that `--follow' works only for a single path argument.
Signed-off-by: Eli Barzilay <eli@barzilay.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* by/log-follow:
tests: rename duplicate t4205
Make git log --follow find copies among unmodified files.
Make diffcore_std only can run once before a diff_flush
Add a macro DIFF_QUEUE_CLEAR.
Add a configuration section summarizing variables that affect the
log family of commands.
Cc: Thomas Rast <trast@student.ethz.ch>
Cc: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --follow <path>' don't track copies from unmodified
files, and this patch fix it.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration is meant to suppliment --decorate command line option
that can be used as a boolean to turn the feature on, so it is natural
to expect
[log]
decorate
decorate = yes
to work. The original commit would segfault with the first one, and
would not understand the second one.
Once a user has this configuration in ~/.gitconfig, there needs to be a
way to override it from the command line. Add --no-decorate option to
log family and also allow --decorate=no to mean the same thing. Since
we allow setting log.decorate to 'true', the command line also should
accept --decorate=yes and behave accordingly.
New tests in t4202 are designed to exercise the interaction between the
configuration variable and the command line option that overrides it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git log -p -m is used to show one merge entry per parent, with an
appropriate diff; this can be useful when examining histories where
full set of changes introduced by a merged branch is interesting, not
only the conflicts.
This patch properly documents the -m switch, which has so far been
mentioned only as a fairly special diff-tree flag.
It also makes the code show full patch entry only for the first parent
when --first-parent is used. Thus:
git log -p -m --first-parent
will show the history from the "main branch perspective", while also
including full diff of changes introduced by other merged in branches.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
