Recent sparse-index addition, namely any use of index_name_pos(),
can expand sparse index entries and breaks any code that walks
cache-tree or existing index entries. One such instance of such a
breakage has been corrected.
* pw/sparse-cache-tree-verify-fix:
t1092: run "rebase --apply" without "-q" in testing
sparse index: fix use-after-free bug in cache_tree_verify()
"git commit" gave duplicated error message when the object store
was unwritable, which has been corrected.
* ab/fix-commit-error-message-upon-unwritable-object-store:
commit: fix duplication regression in permission error output
unwritable tests: assert exact error output
Avoid performance measurements from getting ruined by gc and other
housekeeping pauses interfering in the middle.
* rs/disable-gc-during-perf-tests:
perf: disable automatic housekeeping
Follow through the work to use the repo interface to access
submodule objects in-process, instead of abusing the alternate
object database interface.
* jt/no-abuse-alternate-odb-for-submodules:
submodule: trace adding submodule ODB as alternate
submodule: pass repo to check_has_commit()
object-file: only register submodule ODB if needed
merge-{ort,recursive}: remove add_submodule_odb()
refs: peeling non-the_repository iterators is BUG
refs: teach arbitrary repo support to iterators
refs: plumb repo into ref stores
Leakfix.
* ab/unpack-trees-leakfix:
sequencer: fix a memory leak in do_reset()
sequencer: add a "goto cleanup" to do_reset()
unpack-trees: don't leak memory in verify_clean_subdirectory()
"git fsck" has been taught to report mismatch between expected and
actual types of an object better.
* ab/fsck-unexpected-type:
fsck: report invalid object type-path combinations
fsck: don't hard die on invalid object types
object-file.c: stop dying in parse_loose_header()
object-file.c: return ULHR_TOO_LONG on "header too long"
object-file.c: use "enum" return type for unpack_loose_header()
object-file.c: simplify unpack_loose_short_header()
object-file.c: make parse_loose_header_extended() public
object-file.c: return -1, not "status" from unpack_loose_header()
object-file.c: don't set "typep" when returning non-zero
cat-file tests: test for current --allow-unknown-type behavior
cat-file tests: add corrupt loose object test
cat-file tests: test for missing/bogus object with -t, -s and -p
cat-file tests: move bogus_* variable declarations earlier
fsck tests: test for garbage appended to a loose object
fsck tests: test current hash/type mismatch behavior
fsck tests: refactor one test to use a sub-repo
fsck tests: add test for fsck-ing an unknown type
The implementation of digit-separating single-quotes introduced a
note-worthy regression: the change of a character literal with a
digit would splice the digit and the closing single-quote. For
example, the change from 'a' to '2' is now tokenized as
'[-a'-]{+2'+} instead of '[-a-]{+2+}'.
The options to fix the regression are:
- Tighten the regular expression such that the single-quote can only
occur between digits (that would match the official syntax).
- Remove support for digit separators.
I chose to remove support, because
- I have not seen a lot of code make use of digit separators.
- If code does use digit separators, then the numbers are typically
long. If a change in one of the segments occurs, it is actually
better visible if only that segment is highlighted as the word
that changed instead of the whole long number.
This choice does introduce another minor regression, though, which
is highlighted in the test case: when a change occurs in the second
or later segment of a hexadecimal number where the segment begins
with a digit, but also has letters, the segment is mistaken as
consisting of a number and an identifier. I can live with that.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the "path_list" used in builtin/grep.c, it was declared as
STRING_LIST_INIT_NODUP, let's change it to a STRING_LIST_INIT_DUP
since an early user in cmd_grep() appends a string passed via
parse-options.c to it, which needs to be duplicated.
Let's then convert the remaining callers to use
string_list_append_nodup() instead, allowing us to free the list.
This makes all the tests in t7811-grep-open.sh pass, 6/10 would fail
before this change. The only remaining failure would have been due to
a stray "git checkout" (which still leaks memory). In this case we can
use a "git reset --hard" instead, so let's do that, and move the
test_when_finished() above the code that would modify the relevant
file.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak in the error() path in handle_path_include(), this
allows us to run t1305-config-include.sh under SANITIZE=leak,
previously 4 tests there would fail. This fixes up a leak in
9b25a0b52e (config: add include directive, 2012-02-06).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent sparse-index work broke safety against attempts to add paths
with trailing slashes to the index, which has been corrected.
* rs/make-verify-path-really-verify-again:
read-cache: let verify_path() reject trailing dir separators again
read-cache: add verify_path_internal()
t3905: show failure to ignore sub-repo
"git cat-file --batch" with the "--batch-all-objects" option is
supposed to iterate over all the objects found in a repository, but
it used to translate these object names using the replace mechanism,
which defeats the point of enumerating all objects in the repository.
This has been corrected.
* jk/cat-file-batch-all-wo-replace:
cat-file: use packed_object_info() for --batch-all-objects
cat-file: split ordered/unordered batch-all-objects callbacks
cat-file: disable refs/replace with --batch-all-objects
cat-file: mention --unordered along with --batch-all-objects
t1006: clean up broken objects
"git repack" has been taught to generate multi-pack reachability
bitmaps.
* tb/repack-write-midx:
test-read-midx: fix leak of bitmap_index struct
builtin/repack.c: pass `--refs-snapshot` when writing bitmaps
builtin/repack.c: make largest pack preferred
builtin/repack.c: support writing a MIDX while repacking
builtin/repack.c: extract showing progress to a variable
builtin/repack.c: rename variables that deal with non-kept packs
builtin/repack.c: keep track of existing packs unconditionally
midx: preliminary support for `--refs-snapshot`
builtin/multi-pack-index.c: support `--stdin-packs` mode
midx: expose `write_midx_file_only()` publicly
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
The mergesort implementation used to sort linked list has been
optimized.
* rs/mergesort:
test-mergesort: use repeatable random numbers
mergesort: use ranks stack
p0071: test performance of llist_mergesort()
p0071: measure sorting of already sorted and reversed files
test-mergesort: add unriffle_skewed mode
test-mergesort: add unriffle mode
test-mergesort: add generate subcommand
test-mergesort: add test subcommand
test-mergesort: add sort subcommand
test-mergesort: use strbuf_getline()
When a transport helper pushes via send-pack, it passes --helper-status
to get a machine-readable status back for each ref. The previous commit
taught the send-pack code to hand back "error expecting report" if the
server did not send us the proper ref-status. And that's enough to cause
us to recognize that an error occurred for the ref and print something
sensible in our final status table.
But we do interpret these messages on the remote-helper side to turn
them back into REF_STATUS_* enum values. Recognizing this token to turn
it back into REF_STATUS_EXPECTING_REPORT has two advantages:
1. We now print exactly the same message in the human-readable (and
machine-readable --porcelain) output for this situation whether the
transport went through a helper (e.g., http) or not (e.g., ssh).
2. If any code in the helper really cares about distinguishing
EXPECT_REPORT from more generic error conditions, it could now do
so. I didn't find any, so this is mostly future-proofing.
So this is mostly cosmetic for now, but it seems like the
least-surprising thing for the transport-helper code to be doing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to a server which erroneously omits the final ref-status
report, the client side should complain about the refs for which we
didn't receive the status (because we can't just assume they were
updated). This works over most transports like ssh, but for http we'll
print a very misleading "Everything up-to-date".
It works for ssh because send-pack internally sets the status of each
ref to REF_STATUS_EXPECTING_REPORT, and then if the server doesn't tell
us about a particular ref, it will stay at that value. When we print the
final status table, we'll see that we're still on EXPECTING_REPORT and
complain then.
But for http, we go through remote-curl, which invokes send-pack with
"--stateless-rpc --helper-status". The latter option causes send-pack to
return a machine-readable list of ref statuses to the remote helper. But
ever since its inception in de1a2fdd38 (Smart push over HTTP: client
side, 2009-10-30), the send-pack code has simply omitted mention of any
ref which ended up in EXPECTING_REPORT.
In the remote helper, we then take the absence of any status report
from send-pack to mean that the ref was not even something we tried to
send, and thus it prints "Everything up-to-date". Fortunately it does
detect the eventual non-zero exit from send-pack, and propagates that in
its own non-zero exit code. So at least a careful script invoking "git
push" would notice the failure. But sending the misleading message on
stderr is certainly confusing for humans (not to mention the
machine-readable "push --porcelain" output, though again, any careful
script should be checking the exit code from push, too).
Nobody seems to have noticed because the server in this instance has to
be misbehaving: it has promised to support the ref-status capability
(otherwise the client will not set EXPECTING_REPORT at all), but didn't
send us any. If the connection were simply cut, then send-pack would
complain about getting EOF while trying to read the status. But if the
server actually sends a flush packet (i.e., saying "now you have all of
the ref statuses" without actually sending any), then the client ends up
in this confused situation.
The fix is simple: we should return an error message from "send-pack
--helper-status", just like we would for any other error per-ref error
condition (in the test I included, the server simply omits all ref
status responses, but a more insidious version of this would skip only
some of them).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We run a few operations and make sure they produce identical results
with and without sparse-index; the version we merged to the "next"
branch used the "-q" option to work around a breakage caused by a
version used at Microsoft with some unreleased changes, but since
we would want to make sure the commands produce identical results,
including reports given to the output that lists which commits were
picked, use of "-q" loses too much interesting information.
Let's drop "-q" from the command invocation and revisit the issue
when the problematic changes are upstreamed.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/gc.c has two ways of checking if multi-pack-index is enabled:
- git_config_get_bool() in incremental_repack_auto_condition()
- the_repository->settings.core_multi_pack_index in
maintenance_task_incremental_repack()
The two implementations have existed since the incremental-repack task
was introduced in e841a79a13 (maintenance: add incremental-repack auto
condition, 2020-09-25). These two values can diverge because
prepare_repo_settings() enables the feature in the_repository->settings
by default.
In the case where core.multiPackIndex is not set in the config, the auto
condition would fail, causing the incremental-repack task to not be
run. Because we always want to consider the default values, we should
always use the_repository->settings.
Standardize on using the_repository->settings.core_multi_pack_index to
check if multi-pack-index is enabled.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the previous commit, change fsck to check the
"core_multi_pack_index" variable set in "repo-settings.c" instead of
reading the "core.multiPackIndex" config variable. This fixes a bug
where we wouldn't verify midx if the config key was missing. This bug
was introduced in 18e449f86b (midx: enable core.multiPackIndex by
default, 2020-09-25) where core.multiPackIndex was turned on by default.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change fsck to check the "core_commit_graph" variable set in
"repo-settings.c" instead of reading the "core.commitGraph" variable.
This fixes a bug where we wouldn't verify the commit-graph if the
config key was missing. This bug was introduced in
31b1de6a09 (commit-graph: turn on commit-graph by default, 2019-08-13),
where core.commitGraph was turned on by default.
Add tests to "t5318-commit-graph.sh" to verify that fsck checks the
commit-graph as expected for the 3 values of core.commitGraph. Also,
disable GIT_TEST_COMMIT_GRAPH in t/t0410-partial-clone.sh because some
test cases use fsck in ways that assume that commit-graph checking is
disabled.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we attempt to grep non-ascii log message text with an ascii pattern, we
run into the following issue:
$ git log --color --author='.var.*Bjar' -1 origin/master | grep ^Author
grep: (standard input): binary file matches
So, to fix this teach the grep code to use PCRE2_UTF, as long as the log
output is encoded in UTF-8.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 459b8d22e5 (tests: do not borrow from COPYING and README from the
real source, 2015-02-15) tests that used "lib-diff.sh" (called
"diff-lib.sh" then) were made to stop relying on the top-level COPYING
file, but we still had other tests that referenced it.
Let's move them over to use the "COPYING_test_data" utility function
introduced in the preceding commit, and in the case of the one test
that needed the "README" file use a ROT 13 version of that "COPYING"
test data. That test added in afd222967c (Extend testing git-mv for
renaming of subdirectories, 2006-07-26) just needs more test data that's not the same as the "COPYING" test data, so a ROT 13 version will do.
This change removes the last references to ../{README,COPYING} in the
test suite.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow-up the change in 459b8d22e5 (tests: do not borrow from COPYING
and README from the real source, 2015-02-15) by not shipping a full
copy of older versions of the top-level "COPYING" and "README" files.
The tests that use them just need the small blurb at the top of
"COPYING" as test data, or mock data that's dissimilar. Let's provide
that with a "COPYING_test_data" function instead.
We're not replacing this with some other generic test
data (e.g. "lorum ipsum") because these tests require test file header
to be the old "COPYING" file. See e.g. "t4003-diff-rename-1.sh" which
changes the file, and then does full "test_cmp" comparisons on the
resulting "git diff" output.
This change only changes tests that used the "lib-diff.sh" library,
but splits up what they need into a new "lib-diff-data.sh". A
subsequent commit will change related tests that were missed in
459b8d22e5.
For the test in "t4008-diff-break-rewrite.sh" the "README" file can go
away in favor of echoing the line "some dissimilar content" to a file
in the one test that needed it.
The point of that test is to start with files "A" and "B", and then
have A be more similar to the state of "B" than to its old version (by
copying over the content from the "COPYING" file). Just comparing the
pre-image of "some dissimilar content" and later a munged version of
the "COPYING" output serves that purpose.
While we're at it get rid of a stray "echo $tree" debugging line added
in 15d061b435 ([PATCH] Fix the way diffcore-rename records unremoved
source., 2005-05-27), and stop calling "hash-object" to get the hash
of an object we've just added to the index. We can instead extract
that information from the index itself with "rev-parse".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extend the code added in d6538246d3 (commit-graph: not compatible
with replace objects, 2018-08-20) which ignored replace objects in the
"write" command to ignore it in the "verify" command too.
We can just move this assignment to the cmd_commit_graph(), it
dispatches to "write" and "verify", and we're unlikely to ever get a
sub-command that would like to consider replace refs.
This will make tests added in eddc1f556c (mktag tests: test
update-ref and reachable fsck, 2021-06-17) pass in combination with
the "GIT_TEST_COMMIT_GRAPH" mode added in 859fdc0c3c (commit-graph:
define GIT_TEST_COMMIT_GRAPH, 2018-08-29), except that mode is
currently broken (but is being fixed concurrently). See the discussion
starting at [1].
1. https://lore.kernel.org/git/87wnmihswp.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 135a712375 (commit-graph: add --split option to builtin,
2019-06-18) this function was copy/pasted to the split commit-graph
tests, as in the preceding commit we need to fix this to use
&&-chaining, so it won't be hiding errors.
Unlike its sister function in "t5318-commit-graph.sh", which we got
lucky with, this one was hiding a real test failure. A tests added in
c523035cbd (commit-graph: allow cross-alternate chains, 2019-06-18)
has never worked as intended. Unlike most other graph_git_behavior
uses in this file it clones the repository into a sub-directory, so
we'll need to refer to "commits/6" as "origin/commits/6".
It's not easy to simply move the "graph_git_behavior" to the test
above it, since it itself spawns a "test_expect_success". Let's
instead add support to "graph_git_behavior()" and
"graph_git_two_modes()" to pass a "-C" argument to git.
We also need to add a "test -d fork" here, because otherwise we'll
fail on e.g.:
GIT_SKIP_TESTS=t5324.13 ./t5324-split-commit-graph.sh
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graph_git_two_modes() helper added in 177722b344 (commit:
integrate commit graph with commit parsing, 2018-04-10) didn't
&&-chain its "git commit-graph" invocations, which as can be seen with
SANITIZE=leak will happily mark tests as passing if both of these
commands die, since test_cmp() will be comparing two empty files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Try to re-chmod the trash directory on startup if we fail to "rm -rf"
it. This fixes problems where the test leaves the trash directory
behind in a bad permission state for whatever reason.
This fixes an interaction between [1] where t0004-unwritable.sh was
made to use "test_when_finished" for cleanup, and [2] which added the
"--immediate" mode. If a test in this file failed when running with
"--immediate" we wouldn't run the "test_when_finished" block, which
re-chmods the ".git/objects" directory (see [1]).
This can be demonstrated as e.g. (output snipped for less verbosity):
$ ./t0004-unwritable.sh --run=3 --immediate
ok 1 # skip setup (--run)
ok 2 # skip write-tree should notice unwritable repository (--run)
not ok 3 - commit should notice unwritable repository
[...]
$ ./t0004-unwritable.sh --run=3 --immediate
rm: cannot remove '[...]/trash directory.t0004-unwritable/.git/objects/info': Permission denied
FATAL: Cannot prepare test area
[...]
Instead of some version of reverting [1] let's make the test-lib.sh
resilient to this edge-case, it will happen due to [1], but also
e.g. if the relevant "test-lib.sh" process is kill -9'd during the
test run. We should try harder to recover in this case. If we fail to
remove the test directory let's retry after (re-)chmod-ing it.
This doesn't need to be guarded by something that's equivalent to
"POSIXPERM" since if we don't support "chmod" we were about to fail
anyway.
Let's also discard any error output from (a possibly nonexisting)
"chmod", we'll fail on the subsequent "rm -rf" anyway, likewise for
the first "rm -rf" invocation, we don't want to get the "cannot
remove" output if we can get around it with the "chmod", but we do
want any error output from the second "rm -rf", in case that doesn't
fix the issue.
The lack of &&-chaining between the "chmod" and "rm -rf" is
intentional, if we fail the first "rm -rf", can't chmod, but then
succeed the second time around that's what we were hoping for. We just
want to nuke the directory, not carry forward every possible error
code or error message.
1. dbda967684 (t0004 (unwritable files): simplify error handling,
2010-09-06)
2. b586744a86 (test: skip clean-up when running under --immediate
mode, 2011-06-27)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode added in
956d2e4639 (tests: add a test mode for SANITIZE=leak, run it in CI,
2021-09-23) to use a TAP "Bail out!" message when exiting. This will
cause the test run to exit immediately under a TAP consumer like
"prove(1)".
See 614fe01521 (test-lib: bail out when "-v" used under "prove",
2016-10-22) for the initial introduction of "Bail out!" to the
--verbose being amended here.
Before this compiling with "SANITIZE=" and running the tests with
"prove(1)" would cause all the tests to be run to the end (output
trimmed for fewer columns):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
rm -f -r 'test-results'
*** prove ***
t0000-basic.sh ......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
t0001-init.sh .......... Dubious, test returned 1 (wstat 256, 0x100)
No subtests run
[...output where we list every single t[0-9]*.sh file as failing snipped]
Whereas now we'll fail early, like this ("->" line wrapping added):
$ GIT_TEST_PASSING_SANITIZE_LEAK=true make
[...]
t0000-basic.sh ..................................... Bailout called. Further testing stopped:
-> GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
FAILED--Further testing stopped: GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except
-> when compiled with SANITIZE=leak
make: *** [Makefile:53: prove] Error 1
This change also adds a red color to the "Bailout called" line, as
we're now using "say_color error". That improves existing output in
the case of e.g.:
$ prove -j8 t[0-9]*.sh :: -v
Bailout called. Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
FAILED--Further testing stopped: verbose mode forbidden under TAP harness; try --verbose-log
We don't need to have a "Bail out! " prefix when we're not running
under a TAP consumer (i.e. if test -n "$HARNESS_ACTIVE"), but let's
not make the output conditional on that. Showing it under e.g.:
$ GIT_TEST_PASSING_SANITIZE_LEAK=true ./t0095-bloom.sh
Bail out! GIT_TEST_PASSING_SANITIZE_LEAK=true has no effect except when compiled with SANITIZE=leak
Doesn't harm anything, and I don't think the (small) complexity of
only adding this if we're under "$HARNESS_ACTIVE" is worth it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
De-duplicate the "finalize_junit_xml; GIT_EXIT_OK=t; exit 1" code
shared between the "error()" and "--immediate on failure" code paths,
in preparation for adding a third user in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git cmd -h" shows more than one line of usage text (e.g.
the cmd subcommand may take sub-sub-command), parse-options API
learned to align these lines, even across i18n/l10n.
* ab/align-parse-options-help:
parse-options: properly align continued usage output
git rev-parse --parseopt tests: add more usagestr tests
send-pack: properly use parse_options() API for usage string
parse-options API users: align usage output in C-strings
Teach "git help -c" into helping the command line completion of
configuration variables.
* ab/help-config-vars:
help: move column config discovery to help.c library
help / completion: make "git help" do the hard work
help tests: test --config-for-completion option & output
help: simplify by moving to OPT_CMDMODE()
help: correct logic error in combining --all and --guides
help: correct logic error in combining --all and --config
help tests: add test for --config output
help: correct usage & behavior of "git help --guides"
help: correct the usage string in -h and documentation
Built-in fsmonitor (part 1).
* jh/builtin-fsmonitor-part1:
t/helper/simple-ipc: convert test-simple-ipc to use start_bg_command
run-command: create start_bg_command
simple-ipc/ipc-win32: add Windows ACL to named pipe
simple-ipc/ipc-win32: add trace2 debugging
simple-ipc: move definition of ipc_active_state outside of ifdef
simple-ipc: preparations for supporting binary messages.
trace2: add trace2_child_ready() to report on background children
Updates to the tests in t0000 to test the test framework.
* ab/lib-subtest:
test-lib tests: get rid of copy/pasted mock test code
test-lib tests: assert 1 exit code, not non-zero
test-lib tests: refactor common part of check_sub_test_lib_test*()
test-lib tests: avoid subshell for "test_cmp" for readability
test-lib tests: don't provide a description for the sub-tests
test-lib tests: split up "write and run" into two functions
test-lib tests: move "run_sub_test" to a new lib-subtest.sh
Various fixes in code paths that move untracked files away to make room.
* en/removing-untracked-fixes:
Documentation: call out commands that nuke untracked files/directories
Comment important codepaths regarding nuking untracked files/dirs
unpack-trees: avoid nuking untracked dir in way of locally deleted file
unpack-trees: avoid nuking untracked dir in way of unmerged file
Change unpack_trees' 'reset' flag into an enum
Remove ignored files by default when they are in the way
unpack-trees: make dir an internal-only struct
unpack-trees: introduce preserve_ignored to unpack_trees_options
read-tree, merge-recursive: overwrite ignored files by default
checkout, read-tree: fix leak of unpack_trees_options.dir
t2500: add various tests for nuking untracked files
"git grep --recurse-submodules" takes trees and blobs from the
submodule repository, but the textconv settings when processing a
blob from the submodule is not taken from the submodule repository.
A test is added to demonstrate the issue, without fixing it.
* mt/grep-submodule-textconv:
grep: demonstrate bug with textconv attributes and submodules
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
Mark some tests that match "*{mktree,commit,diff,grep,rm,merge,hunk}*"
as passing when git is compiled with SANITIZE=leak. They'll now be
listed as running under the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test
mode (the "linux-leaks" CI target).
These were picked because we still have a lot of failures in adjacent
areas, and we didn't have much if any coverage of e.g. grep and diff
before this change, we could still whitelist a lot more tests, but
let's stop for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various "generic" tests as passing when git is compiled with
SANITIZE=leak. These tests were subjectively picked from the lists of
passing tests since they're all small, and test some generic feature
such as wildmatch(), commonly used environment variables, ident
parsing etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*read-tree*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target). We still have around half the tests that match
"*read-tree*" failing, but let's whitelist those that don't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*ls-files*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target). We still have others that match '*ls-files*" that fail
under SANITIZE=leak.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark some tests that match "*{checkout,switch}*" as passing when git
is compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Unfortunately almost all of those tests fail when compiled with
SANITIZE=leak, these only pass because they run "checkout-index", not
the main "checkout" command.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark all tests that match "*trace2*" as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark those tests that match "*ls-tree*" as passing when git is
compiled with SANITIZE=leak. They'll now be listed as running under
the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks"
CI target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various existing tests in t00*.sh that invoke a "test-tool" with
as passing when git is compiled with SANITIZE=leak.
They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark various existing tests in t00*.sh that invoke git built-ins with
TEST_PASSES_SANITIZE_LEAK=true as passing when git is compiled with
SANITIZE=leak.
They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protocol v0 clients can get stuck parsing a malformed feature line.
* ah/connect-parse-feature-v0-fix:
connect: also update offset for features without values
Sensitive data in the HTTP trace were supposed to be redacted, but
we failed to do so in HTTP/2 requests.
* jk/http-redact-fix:
http: match headers case-insensitively when redacting
"git cvsserver" had a long-standing bug in its authentication code,
which has finally been corrected (it is unclear and is a separate
question if anybody is seriously using it, though).
* cb/cvsserver:
Documentation: cleanup git-cvsserver
git-cvsserver: protect against NULL in crypt(3)
git-cvsserver: use crypt correctly to compare password hashes
"git clone" from a repository whose HEAD is unborn into a bare
repository didn't follow the branch name the other side used, which
is corrected.
* jk/clone-unborn-head-in-bare:
clone: handle unborn branch in bare repos
"git stash", where the tentative change involves changing a
directory to a file (or vice versa), was confused, which has been
corrected.
* en/stash-df-fix:
stash: restore untracked files AFTER restoring tracked files
stash: avoid feeding directories to update-index
t3903: document a pair of directory/file bugs
When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
"git update-ref --stdin" failed to flush its output as needed,
which potentially led the conversation to a deadlock.
* ps/update-ref-batch-flush:
t1400: avoid SIGPIPE race condition on fifo
update-ref: fix streaming of status updates
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
The output from "git fast-export", when its anonymization feature
is in use, showed an annotated tag incorrectly.
* tk/fast-export-anonymized-tag-fix:
fast-export: fix anonymized tag using original length
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
"git branch -D <branch>" used to refuse to remove a broken branch
ref that points at a missing commit, which has been corrected.
* rs/branch-allow-deleting-dangling:
branch: allow deleting dangling branches with --force
The delayed checkout code path in "git checkout" etc. were chatty
even when --quiet and/or --no-progress options were given.
* mt/quiet-with-delayed-checkout:
checkout: make delayed checkout respect --quiet and --no-progress
"git diff --relative" segfaulted and/or produced incorrect result
when there are unmerged paths.
* dd/diff-files-unmerged-fix:
diff-lib: ignore paths that are outside $cwd if --relative asked
Various bugs in "git rebase -r" have been fixed.
* pw/rebase-r-fixes:
rebase -r: fix merge -c with a merge strategy
rebase -r: don't write .git/MERGE_MSG when fast-forwarding
rebase -i: add another reword test
rebase -r: make 'merge -c' behave like reword
Checking out all the paths from HEAD during the last conflicted
step in "git rebase" and continuing would cause the step to be
skipped (which is expected), but leaves MERGE_MSG file behind in
$GIT_DIR and confuses the next "git commit", which has been
corrected.
* pw/rebase-skip-final-fix:
rebase --continue: remove .git/MERGE_MSG
rebase --apply: restore some tests
t3403: fix commit authorship
"git commit --fixup" now works with "--edit" again, after it was
broken in v2.32.
* jk/commit-edit-fixup-fix:
commit: restore --edit when combined with --fixup
"git apply" miscounted the bytes and failed to read to the end of
binary hunks.
* jk/apply-binary-hunk-parsing-fix:
apply: keep buffer/size pair in sync when parsing binary hunks
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
Bugfix for common ancestor negotiation recently introduced in "git
push" codepath.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
Input validation of "git pack-objects --stdin-packs" has been
corrected.
* ab/pack-stdin-packs-fix:
pack-objects: fix segfault in --stdin-packs option
pack-objects tests: cover blindspots in stdin handling
"git maintenance" scheduler fix for macOS.
* js/maintenance-launchctl-fix:
maintenance: skip bootout/bootstrap when plist is registered
maintenance: create `launchctl` configuration using a lock file
Command line completion updates.
* fc/completion-updates:
completion: bash: add correct suffix in variables
completion: bash: fix for multiple dash commands
completion: bash: fix for suboptions with value
completion: bash: fix prefix detection in branch.*
When the option --dry-run/-n is given, "git add" doesn't change the
index, but still writes out new object files. Only hash the latter
without writing instead to make the run as dry as possible.
Use this opportunity to also make the hash_flags variable unsigned,
to match the index_path() parameter it is used as.
Reported-by: git.mexon@spamgourmet.com
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in the error output emitted when .git/objects can't
be written to. Before 9c4d6c0297 (cache-tree: Write updated
cache-tree after commit, 2014-07-13) we'd emit only one "insufficient
permission" error, now we'll do so again.
The cause is rather straightforward, we've got WRITE_TREE_SILENT for
the use-case of wanting to prepare an index silently, quieting any
permission etc. error output. Then when we attempt to update to
that (possibly broken) index we'll run into the same errors again.
But with 9c4d6c0297 the gap between the cache-tree API and the object
store wasn't closed in terms of asking write_object_file() to be
silent. I.e. post-9c4d6c0297b the first call is to prepare_index(),
and after that we'll call prepare_to_commit(). We only want verbose
error output from the latter.
So let's add and use that facility with a corresponding HASH_SILENT
flag, its only user is cache-tree.c's update_one(), which will set it
if its "WRITE_TREE_SILENT" flag is set.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for fixing a regression where we started emitting some
of these error messages twice, let's assert what the output from "git
commit" and friends is now in the case of permission errors.
As noted in [1] using test_expect_failure to mark up a TODO test has
some unexpected edge cases, e.g. we don't want to break --run=3 by
skipping the "test_lazy_prereq" here. This pattern allows us to test
just the test_cmp (and the "cat", which shouldn't fail) with the added
"test_expect_failure", we'll flip that to a "test_expect_success" in
the next commit.
1. https://lore.kernel.org/git/87tuhmk19c.fsf@evledraar.gmail.com/T/#u
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging a signed tag fmt-merge-msg was unable to verify its
validity missing the necessary ssh allowedSignersFile config.
Adds gpg config parsing to fmt-merge-msg.
Adds tests for ssh signed tags to fmt-merge-msg tests.
Signed-off-by: Fabian Stelzer <fs@gigacodes.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fs/ssh-signing:
ssh signing: test that gpg fails for unknown keys
ssh signing: tests for logs, tags & push certs
ssh signing: duplicate t7510 tests for commits
ssh signing: verify signatures using ssh-keygen
ssh signing: provide a textual signing_key_id
ssh signing: retrieve a default key from ssh-agent
ssh signing: add ssh key format and signing code
ssh signing: add test prereqs
ssh signing: preliminary refactoring and clean-up
Turn off automatic background maintenance for perf tests by default to
avoid interference with performance measurements. Do that by using the
new file t/perf/config and using it as the system config file for perf
tests. Future tests intended to measure gc performance can override
the setting locally or call "git gc" explicitly.
This fixes a breakage in p2000 caused by gc automatically emptying the
reflog due its fake dates from 2005 being older than 90 days.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up in "git difftool".
* da/difftool:
difftool: add a missing space to the run_dir_diff() comments
difftool: remove an unnecessary call to strbuf_release()
difftool: refactor dir-diff to write files using helper functions
difftool: create a tmpdir path without repeated slashes
CI learns to run the leak sanitizer builds.
* ab/sanitize-leak-ci:
tests: add a test mode for SANITIZE=leak, run it in CI
Makefile: add SANITIZE=leak flag to GIT-BUILD-OPTIONS
The ref iteration code used to optionally allow dangling refs to be
shown, which has been tightened up.
* jk/ref-paranoia:
refs: drop "broken" flag from for_each_fullref_in()
ref-filter: drop broken-ref code entirely
ref-filter: stop setting FILTER_REFS_INCLUDE_BROKEN
repack, prune: drop GIT_REF_PARANOIA settings
refs: turn on GIT_REF_PARANOIA by default
refs: omit dangling symrefs when using GIT_REF_PARANOIA
refs: add DO_FOR_EACH_OMIT_DANGLING_SYMREFS flag
refs-internal.h: reorganize DO_FOR_EACH_* flag documentation
refs-internal.h: move DO_FOR_EACH_* flags next to each other
t5312: be more assertive about command failure
t5312: test non-destructive repack
t5312: create bogus ref as necessary
t5312: drop "verbose" helper
t5600: provide detached HEAD for corruption failures
t5516: don't use HEAD ref for invalid ref-deletion tests
t7900: clean up some more broken refs
Test updates.
* sg/test-split-index-fix:
read-cache: fix GIT_TEST_SPLIT_INDEX
tests: disable GIT_TEST_SPLIT_INDEX for sparse index tests
read-cache: look for shared index files next to the index, too
t1600-index: disable GIT_TEST_SPLIT_INDEX
t1600-index: don't run git commands upstream of a pipe
t1600-index: remove unnecessary redirection
"git multi-pack-index write --bitmap" learns to propagate the
hashcache from original bitmap to resulting bitmap.
* tb/midx-write-propagate-namehash:
t5326: test propagating hashcache values
p5326: generate pack bitmaps before writing the MIDX bitmap
p5326: don't set core.multiPackIndex unnecessarily
p5326: create missing 'perf-tag' tag
midx.c: respect 'pack.writeBitmapHashcache' when writing bitmaps
pack-bitmap.c: propagate namehash values from existing bitmaps
t/helper/test-bitmap.c: add 'dump-hashes' mode
Since C++20, the language has a generalized comparison operator <=>.
Teach the cpp driver not to separate it into <= and > tokens.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since C++17, the single-quote can be used as digit separator:
3.141'592'654
1'000'000
0xdead'beaf
Make it known to the word regex of the cpp driver, so that numbers are
not split into separate tokens at the single-quotes.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
