When "git am --abort" fails to abort correctly, it still exited
with exit status of 0, which has been corrected.
* en/am-abort-fix:
am: fix incorrect exit status on am fail to abort
t4151: add a few am --abort tests
git-am.txt: clarify --abort behavior
"git update-ref --stdin" failed to flush its output as needed,
which potentially led the conversation to a deadlock.
* ps/update-ref-batch-flush:
t1400: avoid SIGPIPE race condition on fifo
update-ref: fix streaming of status updates
Various mergy operations have been prepared to work efficiently
with the sparse index.
* ds/mergies-with-sparse-index:
sparse-index: integrate with cherry-pick and rebase
sequencer: ensure full index if not ORT strategy
t1092: add cherry-pick, rebase tests
merge-ort: expand only for out-of-cone conflicts
merge: make sparse-aware with ORT
diff: ignore sparse paths in diffstat
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
Code clean-up around "git serve".
* ab/serve-cleanup:
upload-pack: document and rename --advertise-refs
serve.[ch]: remove "serve_options", split up --advertise-refs code
{upload,receive}-pack tests: add --advertise-refs tests
serve.c: move version line to advertise_capabilities()
serve: move transfer.advertiseSID check into session_id_advertise()
serve.[ch]: don't pass "struct strvec *keys" to commands
serve: use designated initializers
transport: use designated initializers
transport: rename "fetch" in transport_vtable to "fetch_refs"
serve: mark has_capability() as static
"git diff --submodule=diff" showed failure from run_command() when
trying to run diff inside a submodule, when the user manually
removes the submodule directory.
* dt/submodule-diff-fixes:
diff --submodule=diff: don't print failure message twice
diff --submodule=diff: do not fail on ever-initialied deleted submodules
t4060: remove unused variable
"git maintenance" scheduler learned to use systemd timers as a
possible backend.
* lh/systemd-timers:
maintenance: add support for systemd timers on Linux
maintenance: `git maintenance run` learned `--scheduler=<scheduler>`
cache.h: Introduce a generic "xdg_config_home_for(…)" function
The code to make "git grep" recurse into submodules has been
updated to migrate away from the "add submodule's object store as
an alternate object store" mechanism (which is suboptimal).
* jt/grep-wo-submodule-odb-as-alternate:
t7814: show lack of alternate ODB-adding
submodule-config: pass repo upon blob config read
grep: add repository to OID grep sources
grep: allocate subrepos on heap
grep: read submodule entry with explicit repo
grep: typesafe versions of grep_source_init
grep: use submodule-ODB-as-alternate lazy-addition
submodule: lazily add submodule ODBs as alternates
The reachability bitmap file used to be generated only for a single
pack, but now we've learned to generate bitmaps for history that
span across multiple packfiles.
* tb/multi-pack-bitmaps: (29 commits)
pack-bitmap: drop bitmap_index argument from try_partial_reuse()
pack-bitmap: drop repository argument from prepare_midx_bitmap_git()
p5326: perf tests for MIDX bitmaps
p5310: extract full and partial bitmap tests
midx: respect 'GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP'
t7700: update to work with MIDX bitmap test knob
t5319: don't write MIDX bitmaps in t5319
t5310: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t0410: disable GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP
t5326: test multi-pack bitmap behavior
t/helper/test-read-midx.c: add --checksum mode
t5310: move some tests to lib-bitmap.sh
pack-bitmap: write multi-pack bitmaps
pack-bitmap: read multi-pack bitmaps
pack-bitmap.c: avoid redundant calls to try_partial_reuse
pack-bitmap.c: introduce 'bitmap_is_preferred_refname()'
pack-bitmap.c: introduce 'nth_bitmap_object_oid()'
pack-bitmap.c: introduce 'bitmap_num_objects()'
midx: avoid opening multiple MIDXs when writing
midx: close linked MIDXs, avoid leaking memory
...
Teach "test_pause" and "debug" helpers to allow using the HOME and
TERM environment variables the user usually uses.
* pb/test-use-user-env:
test-lib-functions: keep user's debugger config files and TERM in 'debug'
test-lib-functions: optionally keep HOME, TERM and SHELL in 'test_pause'
test-lib-functions: use 'TEST_SHELL_PATH' in 'test_pause'
The "git apply -3" code path learned not to bother the lower level
merge machinery when the three-way merge can be trivially resolved
without the content level merge.
* jc/trivial-threeway-binary-merge:
apply: resolve trivial merge without hitting ll-merge with "--3way"
t1400.190 sometimes fails or even hangs because of the way it uses
fifos. Our goal is to interactively read and write lines from
update-ref, so we have two fifos, in and out. We open a descriptor
connected to "in" and redirect output to that, so that update-ref does
not see EOF as it would if we opened and closed it for each "echo" call.
But we don't do the same for the output. This leads to a race where our
"read response <out" has not yet opened the fifo, but update-ref tries
to write to it and gets SIGPIPE. This can result in the test failing, or
worse, hanging as we wait forever for somebody to write to the pipe.
This is the same proble we fixed in 4783e7ea83 (t0008: avoid SIGPIPE
race condition on fifo, 2013-07-12), and we can fix it the same way, by
opening a second long-running descriptor.
Before this patch, running:
./t1400-update-ref.sh --run=1,190 --stress
failed or hung within a few dozen iterations. After it, I ran it for
several hundred without problems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In be5d88e112 (test-tool run-command: learn to run (parts of) the
testsuite, 2019-10-04) an init pattern was added that would use
TESTSUITE_INIT, but then promptly memset() everything back to 0. We'd
then set the "dup" on the two string lists.
Our setting of "next" to "-1" thus did nothing, we'd reset it to "0"
before using it. Let's set it to "0" instead, and trust the
"STRING_LIST_INIT_DUP" to set "strdup_strings" appropriately for us.
Note that while we compile this code, there's no in-tree user for the
"testsuite" target being modified here anymore, see the discussion at
and around <nycvar.QRO.7.76.6.2109091323150.59@tvgsbejvaqbjf.bet>[1].
1. https://lore.kernel.org/git/nycvar.QRO.7.76.6.2109091323150.59@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove untracked files that are unwanted after they are done being used.
While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error. Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases. While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update plus improved error reporting.
* jk/log-warn-on-bogus-encoding:
docs: use "character encoding" to refer to commit-object encoding
logmsg_reencode(): warn when iconv() fails
After "git clone --recurse-submodules", all submodules are cloned
but they are not by default recursed into by other commands. With
submodule.stickyRecursiveClone configuration set, submodule.recurse
configuration is set to true in a repository created by "clone"
with "--recurse-submodules" option.
* mk/clone-recurse-submodules:
clone: set submodule.recurse=true if submodule.stickyRecursiveClone enabled
The output from "git fast-export", when its anonymization feature
is in use, showed an annotated tag incorrectly.
* tk/fast-export-anonymized-tag-fix:
fast-export: fix anonymized tag using original length
Fixes on usage message from "git commit-graph".
* ab/commit-graph-usage:
commit-graph: show "unexpected subcommand" error
commit-graph: show usage on "commit-graph [write|verify] garbage"
commit-graph: early exit to "usage" on !argc
multi-pack-index: refactor "goto usage" pattern
commit-graph: use parse_options_concat()
commit-graph: remove redundant handling of -h
commit-graph: define common usage with a macro
Even when running "git send-email" without its own threaded
discussion support, a threading related header in one message is
carried over to the subsequent message to result in an unwanted
threading, which has been corrected.
* mh/send-email-reset-in-reply-to:
send-email: avoid incorrect header propagation
Buggy tests could damage repositories outside the throw-away test
area we created. We now by default export GIT_CEILING_DIRECTORIES
to limit the damage from such a stray test.
* sg/set-ceiling-during-tests:
test-lib: set GIT_CEILING_DIRECTORIES to protect the surrounding repository
"git upload-pack" which runs on the other side of "git fetch"
forgot to take the ref namespaces into account when handling
want-ref requests.
* ka/want-ref-in-namespace:
docs: clarify the interaction of transfer.hideRefs and namespaces
upload-pack.c: treat want-ref relative to namespace
t5730: introduce fetch command helper
The advice message that "git cherry-pick" gives when it asks
conflicted replay of a commit to be resolved by the end user has
been updated.
* zh/cherry-pick-advice:
cherry-pick: use better advice message
The t5562 script occasionally takes 60 extra seconds to complete due to
a race condition in the invoke-with-content-length.pl helper.
The way it's supposed to work is this:
- we set up a SIGCLD handler
- we kick off http-backend and write to it with a set content-length,
but _don't_ close the pipe
- we sleep for 60 seconds, assuming that SIGCLD from http-backend
finishing will interrupt us
- after the sleep finishes (whetherby 60 seconds or because it was
interrupted by the signal), we check a flag to see if our SIGCLD
handler was called. If not, then we complain.
This usually completes immediately, because the signal interrupts our
sleep. But very occasionally the child process dies _before_ we hit the
sleep, so we don't realize it. The test still completes successfully
(because our $exited flag is set), but it takes an extra 60 seconds.
There's no way to check the flag and sleep atomically. So the best we
can do with this approach is to sleep in smaller chunks (say, 1 second)
and check the flag incrementally. Then we waste a maximum of 1 second if
we lose the race. This was proposed in:
https://lore.kernel.org/git/20190218205028.32486-1-max@max630.net/
and it does work. But we can do better.
Instead of blocking on sleep and waiting for the child signal to
interrupt us, we can block on the child exiting and set an alarm signal
to trigger the timeout.
This lets us exit the script immediately when the child behaves (with no
race possible), and wait a maximum of 60 seconds when it doesn't.
Note one small subtlety: perl is very willing to restart the waitpid()
call after the alarm is delivered, even if we've thrown an exception via
die. "perldoc -f alarm" claims you can get around this with an eval/die
combo (and even has some example code), but it doesn't seem to work for
me with waitpid(); instead, we continue waiting until the child exits.
So instead, we'll instruct the child process to exit in the alarm
handler itself. In the original code this was done by calling
close($out). That would continue to work, since our child is always
http-backend, which should exit when its stdin closes. But we can be
even more robust against a hung or confused child by sending a KILL
signal, which should terminate it immediately.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hard work was already done with 'git merge' and the ORT strategy.
Just add extra tests to see that we get the expected results in the
non-conflict cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to check that cherry-pick and rebase behave the same in the
sparse-index case as in the full index cases. These tests are agnostic
to GIT_TEST_MERGE_ALGORITHM, so a full CI test suite will check both the
'ort' and 'recursive' strategies on this test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge conflicts happen often enough to want to avoid expanding a sparse
index when they happen, as long as those conflicts are within the
sparse-checkout cone. If a conflict exists outside of the
sparse-checkout cone, then we still need to expand before iterating over
the index entries. This is critical to do in advance because of how the
original_cache_nr is tracked to allow inserting and replacing cache
entries.
Iterate over the conflicted files and check if any paths are outside of
the sparse-checkout cone. If so, then expand the full index.
Add a test that demonstrates that we do not expand the index, even when
we hit a conflict within the sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow 'git merge' to operate without expanding a sparse index, at least
not immediately. The index still will be expanded in a few cases:
1. If the merge strategy is 'recursive', then we enable
command_requires_full_index at the start of the merge_recursive()
method. We expect sparse-index users to also have the 'ort' strategy
enabled.
2. With the 'ort' strategy, if the merge results in a conflicted file,
then we expand the index before updating the working tree. The loop
that iterates over the worktree replaces index entries and tracks
'origintal_cache_nr' which can become completely wrong if the index
expands in the middle of the operation. This safety valve is
important before that loop starts. A later change will focus this
to only expand if we indeed have a conflict outside of the
sparse-checkout cone.
3. Other merge strategies are executed as a 'git merge-X' subcommand,
and those strategies are currently protected with the
'command_requires_full_index' guard.
Some test updates are required, including a mistaken 'git checkout -b'
that did not specify the base branch, causing merges to be fast-forward
merges.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -D <branch>" used to refuse to remove a broken branch
ref that points at a missing commit, which has been corrected.
* rs/branch-allow-deleting-dangling:
branch: allow deleting dangling branches with --force
The delayed checkout code path in "git checkout" etc. were chatty
even when --quiet and/or --no-progress options were given.
* mt/quiet-with-delayed-checkout:
checkout: make delayed checkout respect --quiet and --no-progress
"git diff --relative" segfaulted and/or produced incorrect result
when there are unmerged paths.
* dd/diff-files-unmerged-fix:
diff-lib: ignore paths that are outside $cwd if --relative asked
"git maintenance" scheduler fix for macOS.
* js/maintenance-launchctl-fix:
maintenance: skip bootout/bootstrap when plist is registered
maintenance: create `launchctl` configuration using a lock file
The previous patches have made "git grep" no longer need to add
submodule ODBs as alternates, at least for the code paths tested in
t7814. Demonstrate this by making adding a submodule ODB as an alternate
fatal in this test.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach Git to add submodule ODBs as alternates to the object store of
the_repository only upon the first access of an object not in
the_repository, and not when add_submodule_odb() is called.
This provides a means of gradually migrating from accessing a
submodule's object through alternates to accessing a submodule's object
by explicitly passing its repository object. Any Git command can declare
that it might access submodule objects by calling add_submodule_odb()
(as they do now), but the submodule ODBs themselves will not be added
until needed, so individual commands and/or combinations of arguments
can be migrated one by one.
[The advantage of explicit repository-object passing is code clarity (it
is clear which repository an object read is from), performance (there is
no need to linearly search through all submodule ODBs whenever an object
is accessed from any repository, whether superproject or submodule), and
the possibility of future features like partial clone submodules (which
right now is not possible because if an object is missing, we do not
know which repository to lazy-fetch into).]
This commit also introduces an environment variable that a test may set
to make the actual registration of alternates fatal, in order to
demonstrate that its codepaths do not need this registration.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When changing the scope of a sparse-checkout using cone mode, we might
have some tracked directories go out of scope. The current logic removes
the tracked files from within those directories, but leaves the ignored
files within those directories. This is a bit unexpected to users who
have given input to Git saying they don't need those directories
anymore.
This is something that is new to the cone mode pattern type: the user
has explicitly said "I want these directories and _not_ those
directories." The typical sparse-checkout patterns more generally apply
to "I want files with with these patterns" so it is natural to leave
ignored files as they are. This focus on directories in cone mode
provides us an opportunity to change the behavior.
Leaving these ignored files in the sparse directories makes it
impossible to gain performance benefits in the sparse index. When we
track into these directories, we need to know if the files are ignored
or not, which might depend on the _tracked_ .gitignore file(s) within
the sparse directory. This depends on the indexed version of the file,
so the sparse directory must be expanded.
We must take special care to look for untracked, non-ignored files in
these directories before deleting them. We do not want to delete any
meaningful work that the users were doing in those directories and
perhaps forgot to add and commit before switching sparse-checkout
definitions. Since those untracked files might be code files that
generated ignored build output, also do not delete any ignored files
from these directories in that case. The users can recover their state
by resetting their sparse-checkout definition to include that directory
and continue. Alternatively, they can see the warning that is presented
and delete the directory themselves to regain the performance they
expect.
By deleting the sparse directories when changing scope (or running 'git
sparse-checkout reapply') we regain these performance benefits as if the
repository was in a clean state.
Since these ignored files are frequently build output or helper files
from IDEs, the users should not need the files now that the tracked
files are removed. If the tracked files reappear, then they will have
newer timestamps than the build artifacts, so the artifacts will need to
be regenerated anyway.
Use the sparse-index as a data structure in order to find the sparse
directories that can be safely deleted. Re-expand the index to a full
one if it was full before.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse index is tested with the FS Monitor hook and extension since
f8fe49e (fsmonitor: integrate with sparse index, 2021-07-14). This test
was very fragile because it shared an index across sparse and non-sparse
behavior. Since that expansion and contraction could cause the index to
lose its FS Monitor bitmap and token, behavior is fragile to changes in
'git sparse-checkout set'.
Rewrite the test to use two clones of the original repo: full and
sparse. This allows us to also keep the test files (actual, expect,
trace2.txt) out of the repos we are testing with 'git status'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression in my c95e3a3f0b (send-email: move trivial config
handling to Perl, 2021-05-28) where we'd pick the first config key out
of multiple defined ones, instead of using the normal "last key wins"
semantics of "git config --get".
This broke e.g. cases where a .git/config would have a different
sendemail.smtpServer than ~/.gitconfig. We'd pick the ~/.gitconfig
over .git/config, instead of preferring the repository-local
version. The same would go for /etc/gitconfig etc.
The full list of impacted config keys (the %config_settings values
which are references to scalars, not arrays) is:
sendemail.smtpencryption
sendemail.smtpserver
sendemail.smtpserverport
sendemail.smtpuser
sendemail.smtppass
sendemail.smtpdomain
sendemail.smtpauth
sendemail.smtpbatchsize
sendemail.smtprelogindelay
sendemail.tocmd
sendemail.cccmd
sendemail.aliasfiletype
sendemail.envelopesender
sendemail.confirm
sendemail.from
sendemail.assume8bitencoding
sendemail.composeencoding
sendemail.transferencoding
sendemail.sendmailcmd
I.e. having any of these set in say ~/.gitconfig and in-repo
.git/config regressed in v2.33.0 to prefer the --global one over the
--local.
To test this add a test of config priority to one of these config
variables, most don't have tests at all, but there was an existing one
for sendemail.8bitEncoding.
The "git config" (instead of "test_config") is somewhat of an
anti-pattern, but follows established conventions in
t9001-send-email.sh, likewise with any other pattern or idiom in this
test.
The populating of home/.gitconfig and setting of HOME= is copied from
a test in t0017-env-helper.sh added in 1ff750b128 (tests: make
GIT_TEST_GETTEXT_POISON a boolean, 2019-06-21). This test fails
without this bugfix, but now it works.
Reported-by: Eli Schwartz <eschwartz@archlinux.org>
Tested-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing mechanism for scheduling background maintenance is done
through cron. On Linux systems managed by systemd, systemd provides an
alternative to schedule recurring tasks: systemd timers.
The main motivations to implement systemd timers in addition to cron
are:
* cron is optional and Linux systems running systemd might not have it
installed.
* The execution of `crontab -l` can tell us if cron is installed but not
if the daemon is actually running.
* With systemd, each service is run in its own cgroup and its logs are
tagged by the service inside journald. With cron, all scheduled tasks
are running in the cron daemon cgroup and all the logs of the
user-scheduled tasks are pretended to belong to the system cron
service.
Concretely, a user that doesn’t have access to the system logs won’t
have access to the log of their own tasks scheduled by cron whereas
they will have access to the log of their own tasks scheduled by
systemd timer.
Although `cron` attempts to send email, that email may go unseen by
the user because these days, local mailboxes are not heavily used
anymore.
In order to schedule git maintenance, we need two unit template files:
* ~/.config/systemd/user/git-maintenance@.service
to define the command to be started by systemd and
* ~/.config/systemd/user/git-maintenance@.timer
to define the schedule at which the command should be run.
Those units are templates that are parameterized by the frequency.
Based on those templates, 3 timers are started:
* git-maintenance@hourly.timer
* git-maintenance@daily.timer
* git-maintenance@weekly.timer
The command launched by those three timers are the same as with the
other scheduling methods:
/path/to/git for-each-repo --exec-path=/path/to
--config=maintenance.repo maintenance run --schedule=%i
with the full path for git to ensure that the version of git launched
for the scheduled maintenance is the same as the one used to run
`maintenance start`.
The timer unit contains `Persistent=true` so that, if the computer is
powered down when a maintenance task should run, the task will be run
when the computer is back powered on.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
