8089c85bcb
The prepare-commit-msg hook is run whenever a "fresh" commit message is prepared, just before it is shown in the editor (if it is). Its purpose is to modify the commit message in-place. It takes one to three parameters. The first is the name of the file that the commit log message. The second is the source of the commit message, and can be: "message" (if a -m or -F option was given); "template" (if a -t option was given or the configuration option commit.template is set); "merge" (if the commit is a merge or a .git/MERGE_MSG file exists); "squash" (if a .git/SQUASH_MSG file exists); or "commit", followed by a commit SHA1 as the third parameter (if a -c, -C or --amend option was given). If its exit status is non-zero, git-commit will abort. The hook is not suppressed by the --no-verify option, so it should not be used as a replacement for the pre-commit hook. The sample prepare-commit-msg comments out the `Conflicts:` part of a merge's commit message; other examples are commented out, including adding a Signed-off-by line at the bottom of the commit messsage, that the user can then edit or discard altogether. Signed-off-by: Paolo Bonzini <bonzini@gnu.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
279 lines
10 KiB
Plaintext
279 lines
10 KiB
Plaintext
Hooks used by git
|
|
=================
|
|
|
|
Hooks are little scripts you can place in `$GIT_DIR/hooks`
|
|
directory to trigger action at certain points. When
|
|
`git-init` is run, a handful example hooks are copied in the
|
|
`hooks` directory of the new repository, but by default they are
|
|
all disabled. To enable a hook, make it executable with `chmod +x`.
|
|
|
|
This document describes the currently defined hooks.
|
|
|
|
applypatch-msg
|
|
--------------
|
|
|
|
This hook is invoked by `git-am` script. It takes a single
|
|
parameter, the name of the file that holds the proposed commit
|
|
log message. Exiting with non-zero status causes
|
|
`git-am` to abort before applying the patch.
|
|
|
|
The hook is allowed to edit the message file in place, and can
|
|
be used to normalize the message into some project standard
|
|
format (if the project has one). It can also be used to refuse
|
|
the commit after inspecting the message file.
|
|
|
|
The default 'applypatch-msg' hook, when enabled, runs the
|
|
'commit-msg' hook, if the latter is enabled.
|
|
|
|
pre-applypatch
|
|
--------------
|
|
|
|
This hook is invoked by `git-am`. It takes no parameter,
|
|
and is invoked after the patch is applied, but before a commit
|
|
is made. Exiting with non-zero status causes the working tree
|
|
after application of the patch not committed.
|
|
|
|
It can be used to inspect the current working tree and refuse to
|
|
make a commit if it does not pass certain test.
|
|
|
|
The default 'pre-applypatch' hook, when enabled, runs the
|
|
'pre-commit' hook, if the latter is enabled.
|
|
|
|
post-applypatch
|
|
---------------
|
|
|
|
This hook is invoked by `git-am`. It takes no parameter,
|
|
and is invoked after the patch is applied and a commit is made.
|
|
|
|
This hook is meant primarily for notification, and cannot affect
|
|
the outcome of `git-am`.
|
|
|
|
pre-commit
|
|
----------
|
|
|
|
This hook is invoked by `git-commit`, and can be bypassed
|
|
with `\--no-verify` option. It takes no parameter, and is
|
|
invoked before obtaining the proposed commit log message and
|
|
making a commit. Exiting with non-zero status from this script
|
|
causes the `git-commit` to abort.
|
|
|
|
The default 'pre-commit' hook, when enabled, catches introduction
|
|
of lines with trailing whitespaces and aborts the commit when
|
|
such a line is found.
|
|
|
|
All the `git-commit` hooks are invoked with the environment
|
|
variable `GIT_EDITOR=:` if the command will not bring up an editor
|
|
to modify the commit message.
|
|
|
|
prepare-commit-msg
|
|
------------------
|
|
|
|
This hook is invoked by `git-commit` right after preparing the
|
|
default log message, and before the editor is started.
|
|
|
|
It takes one to three parameters. The first is the name of the file
|
|
that the commit log message. The second is the source of the commit
|
|
message, and can be: `message` (if a `\-m` or `\-F` option was
|
|
given); `template` (if a `\-t` option was given or the
|
|
configuration option `commit.template` is set); `merge` (if the
|
|
commit is a merge or a `.git/MERGE_MSG` file exists); `squash`
|
|
(if a `.git/SQUASH_MSG` file exists); or `commit`, followed by
|
|
a commit SHA1 (if a `\-c`, `\-C` or `\--amend` option was given).
|
|
|
|
If the exit status is non-zero, `git-commit` will abort.
|
|
|
|
The purpose of the hook is to edit the message file in place, and
|
|
it is not suppressed by the `\--no-verify` option. A non-zero exit
|
|
means a failure of the hook and aborts the commit. It should not
|
|
be used as replacement for pre-commit hook.
|
|
|
|
The sample `prepare-commit-msg` hook that comes with git comments
|
|
out the `Conflicts:` part of a merge's commit message.
|
|
|
|
commit-msg
|
|
----------
|
|
|
|
This hook is invoked by `git-commit`, and can be bypassed
|
|
with `\--no-verify` option. It takes a single parameter, the
|
|
name of the file that holds the proposed commit log message.
|
|
Exiting with non-zero status causes the `git-commit` to
|
|
abort.
|
|
|
|
The hook is allowed to edit the message file in place, and can
|
|
be used to normalize the message into some project standard
|
|
format (if the project has one). It can also be used to refuse
|
|
the commit after inspecting the message file.
|
|
|
|
The default 'commit-msg' hook, when enabled, detects duplicate
|
|
"Signed-off-by" lines, and aborts the commit if one is found.
|
|
|
|
post-commit
|
|
-----------
|
|
|
|
This hook is invoked by `git-commit`. It takes no
|
|
parameter, and is invoked after a commit is made.
|
|
|
|
This hook is meant primarily for notification, and cannot affect
|
|
the outcome of `git-commit`.
|
|
|
|
post-checkout
|
|
-----------
|
|
|
|
This hook is invoked when a `git-checkout` is run after having updated the
|
|
worktree. The hook is given three parameters: the ref of the previous HEAD,
|
|
the ref of the new HEAD (which may or may not have changed), and a flag
|
|
indicating whether the checkout was a branch checkout (changing branches,
|
|
flag=1) or a file checkout (retrieving a file from the index, flag=0).
|
|
This hook cannot affect the outcome of `git-checkout`.
|
|
|
|
This hook can be used to perform repository validity checks, auto-display
|
|
differences from the previous HEAD if different, or set working dir metadata
|
|
properties.
|
|
|
|
post-merge
|
|
-----------
|
|
|
|
This hook is invoked by `git-merge`, which happens when a `git pull`
|
|
is done on a local repository. The hook takes a single parameter, a status
|
|
flag specifying whether or not the merge being done was a squash merge.
|
|
This hook cannot affect the outcome of `git-merge`.
|
|
|
|
This hook can be used in conjunction with a corresponding pre-commit hook to
|
|
save and restore any form of metadata associated with the working tree
|
|
(eg: permissions/ownership, ACLS, etc). See contrib/hooks/setgitperms.perl
|
|
for an example of how to do this.
|
|
|
|
[[pre-receive]]
|
|
pre-receive
|
|
-----------
|
|
|
|
This hook is invoked by `git-receive-pack` on the remote repository,
|
|
which happens when a `git push` is done on a local repository.
|
|
Just before starting to update refs on the remote repository, the
|
|
pre-receive hook is invoked. Its exit status determines the success
|
|
or failure of the update.
|
|
|
|
This hook executes once for the receive operation. It takes no
|
|
arguments, but for each ref to be updated it receives on standard
|
|
input a line of the format:
|
|
|
|
<old-value> SP <new-value> SP <ref-name> LF
|
|
|
|
where `<old-value>` is the old object name stored in the ref,
|
|
`<new-value>` is the new object name to be stored in the ref and
|
|
`<ref-name>` is the full name of the ref.
|
|
When creating a new ref, `<old-value>` is 40 `0`.
|
|
|
|
If the hook exits with non-zero status, none of the refs will be
|
|
updated. If the hook exits with zero, updating of individual refs can
|
|
still be prevented by the <<update,'update'>> hook.
|
|
|
|
Both standard output and standard error output are forwarded to
|
|
`git-send-pack` on the other end, so you can simply `echo` messages
|
|
for the user.
|
|
|
|
[[update]]
|
|
update
|
|
------
|
|
|
|
This hook is invoked by `git-receive-pack` on the remote repository,
|
|
which happens when a `git push` is done on a local repository.
|
|
Just before updating the ref on the remote repository, the update hook
|
|
is invoked. Its exit status determines the success or failure of
|
|
the ref update.
|
|
|
|
The hook executes once for each ref to be updated, and takes
|
|
three parameters:
|
|
|
|
- the name of the ref being updated,
|
|
- the old object name stored in the ref,
|
|
- and the new objectname to be stored in the ref.
|
|
|
|
A zero exit from the update hook allows the ref to be updated.
|
|
Exiting with a non-zero status prevents `git-receive-pack`
|
|
from updating that ref.
|
|
|
|
This hook can be used to prevent 'forced' update on certain refs by
|
|
making sure that the object name is a commit object that is a
|
|
descendant of the commit object named by the old object name.
|
|
That is, to enforce a "fast forward only" policy.
|
|
|
|
It could also be used to log the old..new status. However, it
|
|
does not know the entire set of branches, so it would end up
|
|
firing one e-mail per ref when used naively, though. The
|
|
<<post-receive,'post-receive'>> hook is more suited to that.
|
|
|
|
Another use suggested on the mailing list is to use this hook to
|
|
implement access control which is finer grained than the one
|
|
based on filesystem group.
|
|
|
|
Both standard output and standard error output are forwarded to
|
|
`git-send-pack` on the other end, so you can simply `echo` messages
|
|
for the user.
|
|
|
|
The default 'update' hook, when enabled--and with
|
|
`hooks.allowunannotated` config option turned on--prevents
|
|
unannotated tags to be pushed.
|
|
|
|
[[post-receive]]
|
|
post-receive
|
|
------------
|
|
|
|
This hook is invoked by `git-receive-pack` on the remote repository,
|
|
which happens when a `git push` is done on a local repository.
|
|
It executes on the remote repository once after all the refs have
|
|
been updated.
|
|
|
|
This hook executes once for the receive operation. It takes no
|
|
arguments, but gets the same information as the
|
|
<<pre-receive,'pre-receive'>>
|
|
hook does on its standard input.
|
|
|
|
This hook does not affect the outcome of `git-receive-pack`, as it
|
|
is called after the real work is done.
|
|
|
|
This supersedes the <<post-update,'post-update'>> hook in that it gets
|
|
both old and new values of all the refs in addition to their
|
|
names.
|
|
|
|
Both standard output and standard error output are forwarded to
|
|
`git-send-pack` on the other end, so you can simply `echo` messages
|
|
for the user.
|
|
|
|
The default 'post-receive' hook is empty, but there is
|
|
a sample script `post-receive-email` provided in the `contrib/hooks`
|
|
directory in git distribution, which implements sending commit
|
|
emails.
|
|
|
|
[[post-update]]
|
|
post-update
|
|
-----------
|
|
|
|
This hook is invoked by `git-receive-pack` on the remote repository,
|
|
which happens when a `git push` is done on a local repository.
|
|
It executes on the remote repository once after all the refs have
|
|
been updated.
|
|
|
|
It takes a variable number of parameters, each of which is the
|
|
name of ref that was actually updated.
|
|
|
|
This hook is meant primarily for notification, and cannot affect
|
|
the outcome of `git-receive-pack`.
|
|
|
|
The 'post-update' hook can tell what are the heads that were pushed,
|
|
but it does not know what their original and updated values are,
|
|
so it is a poor place to do log old..new. The
|
|
<<post-receive,'post-receive'>> hook does get both original and
|
|
updated values of the refs. You might consider it instead if you need
|
|
them.
|
|
|
|
When enabled, the default 'post-update' hook runs
|
|
`git-update-server-info` to keep the information used by dumb
|
|
transports (e.g., HTTP) up-to-date. If you are publishing
|
|
a git repository that is accessible via HTTP, you should
|
|
probably enable this hook.
|
|
|
|
Both standard output and standard error output are forwarded to
|
|
`git-send-pack` on the other end, so you can simply `echo` messages
|
|
for the user.
|