b2dbacbddf
As $EDITOR is exported setting it in one test affects all subsequent
tests. Avoid this by always setting it in a subshell. This commit leaves
20 calls to set_fake_editor that are not in subshells as they can
safely be removed in the next commit once all the other editor setting
is done inside subshells.
I have moved the call to set_fake_editor in some tests so it comes
immediately before the call to 'git rebase' to avoid moving unrelated
commands into the subshell. In one case ('rebase -ix with
--autosquash') the call to set_fake_editor is moved past an invocation
of 'git rebase'. This is safe as that invocation of 'git rebase'
requires EDITOR=: or EDITOR=fake-editor.sh without FAKE_LINES being
set which will be the case as the preceding tests either set their
editor in a subshell or call set_fake_editor without setting FAKE_LINES.
In a one test ('auto-amend only edited commits after "edit"') a call
to test_tick are now in a subshell. I think this is OK as it is there
to set the date for the next commit which is executed in the same
subshell rather than updating GIT_COMMITTER_DATE for later tests (the
next test calls test_tick before doing anything else).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1607 lines
45 KiB
Bash
Executable File
1607 lines
45 KiB
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Copyright (c) 2007 Johannes E. Schindelin
|
|
#
|
|
|
|
test_description='git rebase interactive
|
|
|
|
This test runs git rebase "interactively", by faking an edit, and verifies
|
|
that the result still makes sense.
|
|
|
|
Initial setup:
|
|
|
|
one - two - three - four (conflict-branch)
|
|
/
|
|
A - B - C - D - E (master)
|
|
| \
|
|
| F - G - H (branch1)
|
|
| \
|
|
|\ I (branch2)
|
|
| \
|
|
| J - K - L - M (no-conflict-branch)
|
|
\
|
|
N - O - P (no-ff-branch)
|
|
|
|
where A, B, D and G all touch file1, and one, two, three, four all
|
|
touch file "conflict".
|
|
'
|
|
. ./test-lib.sh
|
|
|
|
. "$TEST_DIRECTORY"/lib-rebase.sh
|
|
|
|
# WARNING: Modifications to the initial repository can change the SHA ID used
|
|
# in the expect2 file for the 'stop on conflicting pick' test.
|
|
|
|
test_expect_success 'setup' '
|
|
test_commit A file1 &&
|
|
test_commit B file1 &&
|
|
test_commit C file2 &&
|
|
test_commit D file1 &&
|
|
test_commit E file3 &&
|
|
git checkout -b branch1 A &&
|
|
test_commit F file4 &&
|
|
test_commit G file1 &&
|
|
test_commit H file5 &&
|
|
git checkout -b branch2 F &&
|
|
test_commit I file6 &&
|
|
git checkout -b conflict-branch A &&
|
|
test_commit one conflict &&
|
|
test_commit two conflict &&
|
|
test_commit three conflict &&
|
|
test_commit four conflict &&
|
|
git checkout -b no-conflict-branch A &&
|
|
test_commit J fileJ &&
|
|
test_commit K fileK &&
|
|
test_commit L fileL &&
|
|
test_commit M fileM &&
|
|
git checkout -b no-ff-branch A &&
|
|
test_commit N fileN &&
|
|
test_commit O fileO &&
|
|
test_commit P fileP
|
|
'
|
|
|
|
# "exec" commands are run with the user shell by default, but this may
|
|
# be non-POSIX. For example, if SHELL=zsh then ">file" doesn't work
|
|
# to create a file. Unsetting SHELL avoids such non-portable behavior
|
|
# in tests. It must be exported for it to take effect where needed.
|
|
SHELL=
|
|
export SHELL
|
|
|
|
test_expect_success 'rebase --keep-empty' '
|
|
git checkout -b emptybranch master &&
|
|
git commit --allow-empty -m "empty" &&
|
|
git rebase --keep-empty -i HEAD~2 &&
|
|
git log --oneline >actual &&
|
|
test_line_count = 6 actual
|
|
'
|
|
|
|
test_expect_success 'rebase -i with empty HEAD' '
|
|
cat >expect <<-\EOF &&
|
|
error: nothing to do
|
|
EOF
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 exec_true" \
|
|
git rebase -i HEAD^ >actual 2>&1
|
|
) &&
|
|
test_i18ncmp expect actual
|
|
'
|
|
|
|
test_expect_success 'rebase -i with the exec command' '
|
|
git checkout master &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 exec_>touch-one
|
|
2 exec_>touch-two exec_false exec_>touch-three
|
|
3 4 exec_>\"touch-file__name_with_spaces\";_>touch-after-semicolon 5" &&
|
|
export FAKE_LINES &&
|
|
test_must_fail git rebase -i A
|
|
) &&
|
|
test_path_is_file touch-one &&
|
|
test_path_is_file touch-two &&
|
|
test_path_is_missing touch-three " (should have stopped before)" &&
|
|
test_cmp_rev C HEAD &&
|
|
git rebase --continue &&
|
|
test_path_is_file touch-three &&
|
|
test_path_is_file "touch-file name with spaces" &&
|
|
test_path_is_file touch-after-semicolon &&
|
|
test_cmp_rev master HEAD &&
|
|
rm -f touch-*
|
|
'
|
|
|
|
test_expect_success 'rebase -i with the exec command runs from tree root' '
|
|
git checkout master &&
|
|
mkdir subdir && (cd subdir &&
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 exec_>touch-subdir" \
|
|
git rebase -i HEAD^
|
|
) &&
|
|
test_path_is_file touch-subdir &&
|
|
rm -fr subdir
|
|
'
|
|
|
|
test_expect_success 'rebase -i with exec allows git commands in subdirs' '
|
|
test_when_finished "rm -rf subdir" &&
|
|
test_when_finished "git rebase --abort ||:" &&
|
|
git checkout master &&
|
|
mkdir subdir && (cd subdir &&
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 x_cd_subdir_&&_git_rev-parse_--is-inside-work-tree" \
|
|
git rebase -i HEAD^
|
|
)
|
|
'
|
|
|
|
test_expect_success 'rebase -i sets work tree properly' '
|
|
test_when_finished "rm -rf subdir" &&
|
|
test_when_finished "test_might_fail git rebase --abort" &&
|
|
mkdir subdir &&
|
|
git rebase -x "(cd subdir && git rev-parse --show-toplevel)" HEAD^ \
|
|
>actual &&
|
|
! grep "/subdir$" actual
|
|
'
|
|
|
|
test_expect_success 'rebase -i with the exec command checks tree cleanness' '
|
|
git checkout master &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="exec_echo_foo_>file1 1" \
|
|
git rebase -i HEAD^
|
|
) &&
|
|
test_cmp_rev master^ HEAD &&
|
|
git reset --hard &&
|
|
git rebase --continue
|
|
'
|
|
|
|
test_expect_success 'rebase -x with empty command fails' '
|
|
test_when_finished "git rebase --abort ||:" &&
|
|
test_must_fail env git rebase -x "" @ 2>actual &&
|
|
test_write_lines "error: empty exec command" >expected &&
|
|
test_i18ncmp expected actual &&
|
|
test_must_fail env git rebase -x " " @ 2>actual &&
|
|
test_i18ncmp expected actual
|
|
'
|
|
|
|
LF='
|
|
'
|
|
test_expect_success 'rebase -x with newline in command fails' '
|
|
test_when_finished "git rebase --abort ||:" &&
|
|
test_must_fail env git rebase -x "a${LF}b" @ 2>actual &&
|
|
test_write_lines "error: exec commands cannot contain newlines" \
|
|
>expected &&
|
|
test_i18ncmp expected actual
|
|
'
|
|
|
|
test_expect_success 'rebase -i with exec of inexistent command' '
|
|
git checkout master &&
|
|
test_when_finished "git rebase --abort" &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="exec_this-command-does-not-exist 1" \
|
|
git rebase -i HEAD^ >actual 2>&1
|
|
) &&
|
|
! grep "Maybe git-rebase is broken" actual
|
|
'
|
|
|
|
test_expect_success 'implicit interactive rebase does not invoke sequence editor' '
|
|
test_when_finished "git rebase --abort ||:" &&
|
|
GIT_SEQUENCE_EDITOR="echo bad >" git rebase -x"echo one" @^
|
|
'
|
|
|
|
test_expect_success 'no changes are a nop' '
|
|
git checkout branch2 &&
|
|
set_fake_editor &&
|
|
git rebase -i F &&
|
|
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" &&
|
|
test $(git rev-parse I) = $(git rev-parse HEAD)
|
|
'
|
|
|
|
test_expect_success 'test the [branch] option' '
|
|
git checkout -b dead-end &&
|
|
git rm file6 &&
|
|
git commit -m "stop here" &&
|
|
set_fake_editor &&
|
|
git rebase -i F branch2 &&
|
|
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch2" &&
|
|
test $(git rev-parse I) = $(git rev-parse branch2) &&
|
|
test $(git rev-parse I) = $(git rev-parse HEAD)
|
|
'
|
|
|
|
test_expect_success 'test --onto <branch>' '
|
|
git checkout -b test-onto branch2 &&
|
|
set_fake_editor &&
|
|
git rebase -i --onto branch1 F &&
|
|
test "$(git symbolic-ref -q HEAD)" = "refs/heads/test-onto" &&
|
|
test $(git rev-parse HEAD^) = $(git rev-parse branch1) &&
|
|
test $(git rev-parse I) = $(git rev-parse branch2)
|
|
'
|
|
|
|
test_expect_success 'rebase on top of a non-conflicting commit' '
|
|
git checkout branch1 &&
|
|
git tag original-branch1 &&
|
|
set_fake_editor &&
|
|
git rebase -i branch2 &&
|
|
test file6 = $(git diff --name-only original-branch1) &&
|
|
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" &&
|
|
test $(git rev-parse I) = $(git rev-parse branch2) &&
|
|
test $(git rev-parse I) = $(git rev-parse HEAD~2)
|
|
'
|
|
|
|
test_expect_success 'reflog for the branch shows state before rebase' '
|
|
test $(git rev-parse branch1@{1}) = $(git rev-parse original-branch1)
|
|
'
|
|
|
|
test_expect_success 'reflog for the branch shows correct finish message' '
|
|
printf "rebase -i (finish): refs/heads/branch1 onto %s\n" \
|
|
"$(git rev-parse branch2)" >expected &&
|
|
git log -g --pretty=%gs -1 refs/heads/branch1 >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'exchange two commits' '
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="2 1" git rebase -i HEAD~2
|
|
) &&
|
|
test H = $(git cat-file commit HEAD^ | sed -ne \$p) &&
|
|
test G = $(git cat-file commit HEAD | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'stop on conflicting pick' '
|
|
cat >expect <<-\EOF &&
|
|
diff --git a/file1 b/file1
|
|
index f70f10e..fd79235 100644
|
|
--- a/file1
|
|
+++ b/file1
|
|
@@ -1 +1 @@
|
|
-A
|
|
+G
|
|
EOF
|
|
cat >expect2 <<-\EOF &&
|
|
<<<<<<< HEAD
|
|
D
|
|
=======
|
|
G
|
|
>>>>>>> 5d18e54... G
|
|
EOF
|
|
git tag new-branch1 &&
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -i master &&
|
|
test "$(git rev-parse HEAD~3)" = "$(git rev-parse master)" &&
|
|
test_cmp expect .git/rebase-merge/patch &&
|
|
test_cmp expect2 file1 &&
|
|
test "$(git diff --name-status |
|
|
sed -n -e "/^U/s/^U[^a-z]*//p")" = file1 &&
|
|
test 4 = $(grep -v "^#" < .git/rebase-merge/done | wc -l) &&
|
|
test 0 = $(grep -c "^[^#]" < .git/rebase-merge/git-rebase-todo)
|
|
'
|
|
|
|
test_expect_success 'show conflicted patch' '
|
|
GIT_TRACE=1 git rebase --show-current-patch >/dev/null 2>stderr &&
|
|
grep "show.*REBASE_HEAD" stderr &&
|
|
# the original stopped-sha1 is abbreviated
|
|
stopped_sha1="$(git rev-parse $(cat ".git/rebase-merge/stopped-sha"))" &&
|
|
test "$(git rev-parse REBASE_HEAD)" = "$stopped_sha1"
|
|
'
|
|
|
|
test_expect_success 'abort' '
|
|
git rebase --abort &&
|
|
test $(git rev-parse new-branch1) = $(git rev-parse HEAD) &&
|
|
test "$(git symbolic-ref -q HEAD)" = "refs/heads/branch1" &&
|
|
test_path_is_missing .git/rebase-merge
|
|
'
|
|
|
|
test_expect_success 'abort with error when new base cannot be checked out' '
|
|
git rm --cached file1 &&
|
|
git commit -m "remove file in base" &&
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -i master > output 2>&1 &&
|
|
test_i18ngrep "The following untracked working tree files would be overwritten by checkout:" \
|
|
output &&
|
|
test_i18ngrep "file1" output &&
|
|
test_path_is_missing .git/rebase-merge &&
|
|
git reset --hard HEAD^
|
|
'
|
|
|
|
test_expect_success 'retain authorship' '
|
|
echo A > file7 &&
|
|
git add file7 &&
|
|
test_tick &&
|
|
GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" &&
|
|
git tag twerp &&
|
|
set_fake_editor &&
|
|
git rebase -i --onto master HEAD^ &&
|
|
git show HEAD | grep "^Author: Twerp Snog"
|
|
'
|
|
|
|
test_expect_success 'retain authorship w/ conflicts' '
|
|
oGIT_AUTHOR_NAME=$GIT_AUTHOR_NAME &&
|
|
test_when_finished "GIT_AUTHOR_NAME=\$oGIT_AUTHOR_NAME" &&
|
|
|
|
git reset --hard twerp &&
|
|
test_commit a conflict a conflict-a &&
|
|
git reset --hard twerp &&
|
|
|
|
GIT_AUTHOR_NAME=AttributeMe &&
|
|
export GIT_AUTHOR_NAME &&
|
|
test_commit b conflict b conflict-b &&
|
|
GIT_AUTHOR_NAME=$oGIT_AUTHOR_NAME &&
|
|
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -i conflict-a &&
|
|
echo resolved >conflict &&
|
|
git add conflict &&
|
|
git rebase --continue &&
|
|
test $(git rev-parse conflict-a^0) = $(git rev-parse HEAD^) &&
|
|
git show >out &&
|
|
grep AttributeMe out
|
|
'
|
|
|
|
test_expect_success 'squash' '
|
|
git reset --hard twerp &&
|
|
echo B > file7 &&
|
|
test_tick &&
|
|
GIT_AUTHOR_NAME="Nitfol" git commit -m "nitfol" file7 &&
|
|
echo "******************************" &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 squash 2" EXPECT_HEADER_COUNT=2 \
|
|
git rebase -i --onto master HEAD~2
|
|
) &&
|
|
test B = $(cat file7) &&
|
|
test $(git rev-parse HEAD^) = $(git rev-parse master)
|
|
'
|
|
|
|
test_expect_success 'retain authorship when squashing' '
|
|
git show HEAD | grep "^Author: Twerp Snog"
|
|
'
|
|
|
|
test_expect_success REBASE_P '-p handles "no changes" gracefully' '
|
|
HEAD=$(git rev-parse HEAD) &&
|
|
set_fake_editor &&
|
|
git rebase -i -p HEAD^ &&
|
|
git update-index --refresh &&
|
|
git diff-files --quiet &&
|
|
git diff-index --quiet --cached HEAD -- &&
|
|
test $HEAD = $(git rev-parse HEAD)
|
|
'
|
|
|
|
test_expect_failure REBASE_P 'exchange two commits with -p' '
|
|
git checkout H &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="2 1" git rebase -i -p HEAD~2
|
|
) &&
|
|
test H = $(git cat-file commit HEAD^ | sed -ne \$p) &&
|
|
test G = $(git cat-file commit HEAD | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success REBASE_P 'preserve merges with -p' '
|
|
git checkout -b to-be-preserved master^ &&
|
|
: > unrelated-file &&
|
|
git add unrelated-file &&
|
|
test_tick &&
|
|
git commit -m "unrelated" &&
|
|
git checkout -b another-branch master &&
|
|
echo B > file1 &&
|
|
test_tick &&
|
|
git commit -m J file1 &&
|
|
test_tick &&
|
|
git merge to-be-preserved &&
|
|
echo C > file1 &&
|
|
test_tick &&
|
|
git commit -m K file1 &&
|
|
echo D > file1 &&
|
|
test_tick &&
|
|
git commit -m L1 file1 &&
|
|
git checkout HEAD^ &&
|
|
echo 1 > unrelated-file &&
|
|
test_tick &&
|
|
git commit -m L2 unrelated-file &&
|
|
test_tick &&
|
|
git merge another-branch &&
|
|
echo E > file1 &&
|
|
test_tick &&
|
|
git commit -m M file1 &&
|
|
git checkout -b to-be-rebased &&
|
|
test_tick &&
|
|
set_fake_editor &&
|
|
git rebase -i -p --onto branch1 master &&
|
|
git update-index --refresh &&
|
|
git diff-files --quiet &&
|
|
git diff-index --quiet --cached HEAD -- &&
|
|
test $(git rev-parse HEAD~6) = $(git rev-parse branch1) &&
|
|
test $(git rev-parse HEAD~4^2) = $(git rev-parse to-be-preserved) &&
|
|
test $(git rev-parse HEAD^^2^) = $(git rev-parse HEAD^^^) &&
|
|
test $(git show HEAD~5:file1) = B &&
|
|
test $(git show HEAD~3:file1) = C &&
|
|
test $(git show HEAD:file1) = E &&
|
|
test $(git show HEAD:unrelated-file) = 1
|
|
'
|
|
|
|
test_expect_success REBASE_P 'edit ancestor with -p' '
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 2 edit 3 4" git rebase -i -p HEAD~3
|
|
) &&
|
|
echo 2 > unrelated-file &&
|
|
test_tick &&
|
|
git commit -m L2-modified --amend unrelated-file &&
|
|
git rebase --continue &&
|
|
git update-index --refresh &&
|
|
git diff-files --quiet &&
|
|
git diff-index --quiet --cached HEAD -- &&
|
|
test $(git show HEAD:unrelated-file) = 2
|
|
'
|
|
|
|
test_expect_success '--continue tries to commit' '
|
|
git reset --hard D &&
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -i --onto new-branch1 HEAD^ &&
|
|
echo resolved > file1 &&
|
|
git add file1 &&
|
|
FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue
|
|
) &&
|
|
test $(git rev-parse HEAD^) = $(git rev-parse new-branch1) &&
|
|
git show HEAD | grep chouette
|
|
'
|
|
|
|
test_expect_success 'verbose flag is heeded, even after --continue' '
|
|
git reset --hard master@{1} &&
|
|
test_tick &&
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -v -i --onto new-branch1 HEAD^ &&
|
|
echo resolved > file1 &&
|
|
git add file1 &&
|
|
git rebase --continue > output &&
|
|
grep "^ file1 | 2 +-$" output
|
|
'
|
|
|
|
test_expect_success C_LOCALE_OUTPUT 'multi-squash only fires up editor once' '
|
|
base=$(git rev-parse HEAD~4) &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_COMMIT_AMEND="ONCE" \
|
|
FAKE_LINES="1 squash 2 squash 3 squash 4" \
|
|
EXPECT_HEADER_COUNT=4 \
|
|
git rebase -i $base
|
|
) &&
|
|
test $base = $(git rev-parse HEAD^) &&
|
|
test 1 = $(git show | grep ONCE | wc -l)
|
|
'
|
|
|
|
test_expect_success C_LOCALE_OUTPUT 'multi-fixup does not fire up editor' '
|
|
git checkout -b multi-fixup E &&
|
|
base=$(git rev-parse HEAD~4) &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_COMMIT_AMEND="NEVER" \
|
|
FAKE_LINES="1 fixup 2 fixup 3 fixup 4" \
|
|
git rebase -i $base
|
|
) &&
|
|
test $base = $(git rev-parse HEAD^) &&
|
|
test 0 = $(git show | grep NEVER | wc -l) &&
|
|
git checkout @{-1} &&
|
|
git branch -D multi-fixup
|
|
'
|
|
|
|
test_expect_success 'commit message used after conflict' '
|
|
git checkout -b conflict-fixup conflict-branch &&
|
|
base=$(git rev-parse HEAD~4) &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 fixup 3 fixup 4" \
|
|
git rebase -i $base &&
|
|
echo three > conflict &&
|
|
git add conflict &&
|
|
FAKE_COMMIT_AMEND="ONCE" EXPECT_HEADER_COUNT=2 \
|
|
git rebase --continue
|
|
) &&
|
|
test $base = $(git rev-parse HEAD^) &&
|
|
test 1 = $(git show | grep ONCE | wc -l) &&
|
|
git checkout @{-1} &&
|
|
git branch -D conflict-fixup
|
|
'
|
|
|
|
test_expect_success 'commit message retained after conflict' '
|
|
git checkout -b conflict-squash conflict-branch &&
|
|
base=$(git rev-parse HEAD~4) &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 fixup 3 squash 4" \
|
|
git rebase -i $base &&
|
|
echo three > conflict &&
|
|
git add conflict &&
|
|
FAKE_COMMIT_AMEND="TWICE" EXPECT_HEADER_COUNT=2 \
|
|
git rebase --continue
|
|
) &&
|
|
test $base = $(git rev-parse HEAD^) &&
|
|
test 2 = $(git show | grep TWICE | wc -l) &&
|
|
git checkout @{-1} &&
|
|
git branch -D conflict-squash
|
|
'
|
|
|
|
test_expect_success C_LOCALE_OUTPUT 'squash and fixup generate correct log messages' '
|
|
cat >expect-squash-fixup <<-\EOF &&
|
|
B
|
|
|
|
D
|
|
|
|
ONCE
|
|
EOF
|
|
git checkout -b squash-fixup E &&
|
|
base=$(git rev-parse HEAD~4) &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_COMMIT_AMEND="ONCE" \
|
|
FAKE_LINES="1 fixup 2 squash 3 fixup 4" \
|
|
EXPECT_HEADER_COUNT=4 \
|
|
git rebase -i $base
|
|
) &&
|
|
git cat-file commit HEAD | sed -e 1,/^\$/d > actual-squash-fixup &&
|
|
test_cmp expect-squash-fixup actual-squash-fixup &&
|
|
git cat-file commit HEAD@{2} |
|
|
grep "^# This is a combination of 3 commits\." &&
|
|
git cat-file commit HEAD@{3} |
|
|
grep "^# This is a combination of 2 commits\." &&
|
|
git checkout @{-1} &&
|
|
git branch -D squash-fixup
|
|
'
|
|
|
|
test_expect_success C_LOCALE_OUTPUT 'squash ignores comments' '
|
|
git checkout -b skip-comments E &&
|
|
base=$(git rev-parse HEAD~4) &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_COMMIT_AMEND="ONCE" \
|
|
FAKE_LINES="# 1 # squash 2 # squash 3 # squash 4 #" \
|
|
EXPECT_HEADER_COUNT=4 \
|
|
git rebase -i $base
|
|
) &&
|
|
test $base = $(git rev-parse HEAD^) &&
|
|
test 1 = $(git show | grep ONCE | wc -l) &&
|
|
git checkout @{-1} &&
|
|
git branch -D skip-comments
|
|
'
|
|
|
|
test_expect_success C_LOCALE_OUTPUT 'squash ignores blank lines' '
|
|
git checkout -b skip-blank-lines E &&
|
|
base=$(git rev-parse HEAD~4) &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_COMMIT_AMEND="ONCE" \
|
|
FAKE_LINES="> 1 > squash 2 > squash 3 > squash 4 >" \
|
|
EXPECT_HEADER_COUNT=4 \
|
|
git rebase -i $base
|
|
) &&
|
|
test $base = $(git rev-parse HEAD^) &&
|
|
test 1 = $(git show | grep ONCE | wc -l) &&
|
|
git checkout @{-1} &&
|
|
git branch -D skip-blank-lines
|
|
'
|
|
|
|
test_expect_success 'squash works as expected' '
|
|
git checkout -b squash-works no-conflict-branch &&
|
|
one=$(git rev-parse HEAD~3) &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 s 3 2" EXPECT_HEADER_COUNT=2 git rebase -i HEAD~3
|
|
) &&
|
|
test $one = $(git rev-parse HEAD~2)
|
|
'
|
|
|
|
test_expect_success 'interrupted squash works as expected' '
|
|
git checkout -b interrupted-squash conflict-branch &&
|
|
one=$(git rev-parse HEAD~3) &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 squash 3 2" \
|
|
git rebase -i HEAD~3
|
|
) &&
|
|
test_write_lines one two four > conflict &&
|
|
git add conflict &&
|
|
test_must_fail git rebase --continue &&
|
|
echo resolved > conflict &&
|
|
git add conflict &&
|
|
git rebase --continue &&
|
|
test $one = $(git rev-parse HEAD~2)
|
|
'
|
|
|
|
test_expect_success 'interrupted squash works as expected (case 2)' '
|
|
git checkout -b interrupted-squash2 conflict-branch &&
|
|
one=$(git rev-parse HEAD~3) &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="3 squash 1 2" \
|
|
git rebase -i HEAD~3
|
|
) &&
|
|
test_write_lines one four > conflict &&
|
|
git add conflict &&
|
|
test_must_fail git rebase --continue &&
|
|
test_write_lines one two four > conflict &&
|
|
git add conflict &&
|
|
test_must_fail git rebase --continue &&
|
|
echo resolved > conflict &&
|
|
git add conflict &&
|
|
git rebase --continue &&
|
|
test $one = $(git rev-parse HEAD~2)
|
|
'
|
|
|
|
test_expect_success '--continue tries to commit, even for "edit"' '
|
|
echo unrelated > file7 &&
|
|
git add file7 &&
|
|
test_tick &&
|
|
git commit -m "unrelated change" &&
|
|
parent=$(git rev-parse HEAD^) &&
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1" git rebase -i HEAD^ &&
|
|
echo edited > file7 &&
|
|
git add file7 &&
|
|
FAKE_COMMIT_MESSAGE="chouette!" git rebase --continue
|
|
) &&
|
|
test edited = $(git show HEAD:file7) &&
|
|
git show HEAD | grep chouette &&
|
|
test $parent = $(git rev-parse HEAD^)
|
|
'
|
|
|
|
test_expect_success 'aborted --continue does not squash commits after "edit"' '
|
|
old=$(git rev-parse HEAD) &&
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1" git rebase -i HEAD^ &&
|
|
echo "edited again" > file7 &&
|
|
git add file7 &&
|
|
test_must_fail env FAKE_COMMIT_MESSAGE=" " git rebase --continue
|
|
) &&
|
|
test $old = $(git rev-parse HEAD) &&
|
|
git rebase --abort
|
|
'
|
|
|
|
test_expect_success 'auto-amend only edited commits after "edit"' '
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1" git rebase -i HEAD^ &&
|
|
echo "edited again" > file7 &&
|
|
git add file7 &&
|
|
FAKE_COMMIT_MESSAGE="edited file7 again" git commit &&
|
|
echo "and again" > file7 &&
|
|
git add file7 &&
|
|
test_tick &&
|
|
test_must_fail env FAKE_COMMIT_MESSAGE="and again" \
|
|
git rebase --continue
|
|
) &&
|
|
git rebase --abort
|
|
'
|
|
|
|
test_expect_success 'clean error after failed "exec"' '
|
|
test_tick &&
|
|
test_when_finished "git rebase --abort || :" &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 exec_false" git rebase -i HEAD^
|
|
) &&
|
|
echo "edited again" > file7 &&
|
|
git add file7 &&
|
|
test_must_fail git rebase --continue 2>error &&
|
|
test_i18ngrep "you have staged changes in your working tree" error
|
|
'
|
|
|
|
test_expect_success 'rebase a detached HEAD' '
|
|
grandparent=$(git rev-parse HEAD~2) &&
|
|
git checkout $(git rev-parse HEAD) &&
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="2 1" git rebase -i HEAD~2
|
|
) &&
|
|
test $grandparent = $(git rev-parse HEAD~2)
|
|
'
|
|
|
|
test_expect_success 'rebase a commit violating pre-commit' '
|
|
|
|
mkdir -p .git/hooks &&
|
|
write_script .git/hooks/pre-commit <<-\EOF &&
|
|
test -z "$(git diff --cached --check)"
|
|
EOF
|
|
echo "monde! " >> file1 &&
|
|
test_tick &&
|
|
test_must_fail git commit -m doesnt-verify file1 &&
|
|
git commit -m doesnt-verify --no-verify file1 &&
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES=2 git rebase -i HEAD~2
|
|
)
|
|
'
|
|
|
|
test_expect_success 'rebase with a file named HEAD in worktree' '
|
|
|
|
rm -fr .git/hooks &&
|
|
git reset --hard &&
|
|
git checkout -b branch3 A &&
|
|
|
|
(
|
|
GIT_AUTHOR_NAME="Squashed Away" &&
|
|
export GIT_AUTHOR_NAME &&
|
|
>HEAD &&
|
|
git add HEAD &&
|
|
git commit -m "Add head" &&
|
|
>BODY &&
|
|
git add BODY &&
|
|
git commit -m "Add body"
|
|
) &&
|
|
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 squash 2" git rebase -i @{-1}
|
|
) &&
|
|
test "$(git show -s --pretty=format:%an)" = "Squashed Away"
|
|
|
|
'
|
|
|
|
test_expect_success 'do "noop" when there is nothing to cherry-pick' '
|
|
|
|
git checkout -b branch4 HEAD &&
|
|
GIT_EDITOR=: git commit --amend \
|
|
--author="Somebody else <somebody@else.com>" &&
|
|
test $(git rev-parse branch3) != $(git rev-parse branch4) &&
|
|
set_fake_editor &&
|
|
git rebase -i branch3 &&
|
|
test $(git rev-parse branch3) = $(git rev-parse branch4)
|
|
|
|
'
|
|
|
|
test_expect_success 'submodule rebase setup' '
|
|
git checkout A &&
|
|
mkdir sub &&
|
|
(
|
|
cd sub && git init && >elif &&
|
|
git add elif && git commit -m "submodule initial"
|
|
) &&
|
|
echo 1 >file1 &&
|
|
git add file1 sub &&
|
|
test_tick &&
|
|
git commit -m "One" &&
|
|
echo 2 >file1 &&
|
|
test_tick &&
|
|
git commit -a -m "Two" &&
|
|
(
|
|
cd sub && echo 3 >elif &&
|
|
git commit -a -m "submodule second"
|
|
) &&
|
|
test_tick &&
|
|
set_fake_editor &&
|
|
git commit -a -m "Three changes submodule"
|
|
'
|
|
|
|
test_expect_success 'submodule rebase -i' '
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 squash 2 3" git rebase -i A
|
|
)
|
|
'
|
|
|
|
test_expect_success 'submodule conflict setup' '
|
|
git tag submodule-base &&
|
|
git checkout HEAD^ &&
|
|
(
|
|
cd sub && git checkout HEAD^ && echo 4 >elif &&
|
|
git add elif && git commit -m "submodule conflict"
|
|
) &&
|
|
git add sub &&
|
|
test_tick &&
|
|
git commit -m "Conflict in submodule" &&
|
|
git tag submodule-topic
|
|
'
|
|
|
|
test_expect_success 'rebase -i continue with only submodule staged' '
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -i submodule-base &&
|
|
git add sub &&
|
|
git rebase --continue &&
|
|
test $(git rev-parse submodule-base) != $(git rev-parse HEAD)
|
|
'
|
|
|
|
test_expect_success 'rebase -i continue with unstaged submodule' '
|
|
git checkout submodule-topic &&
|
|
git reset --hard &&
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -i submodule-base &&
|
|
git reset &&
|
|
git rebase --continue &&
|
|
test $(git rev-parse submodule-base) = $(git rev-parse HEAD)
|
|
'
|
|
|
|
test_expect_success 'avoid unnecessary reset' '
|
|
git checkout master &&
|
|
git reset --hard &&
|
|
test-tool chmtime =123456789 file3 &&
|
|
git update-index --refresh &&
|
|
HEAD=$(git rev-parse HEAD) &&
|
|
set_fake_editor &&
|
|
git rebase -i HEAD~4 &&
|
|
test $HEAD = $(git rev-parse HEAD) &&
|
|
MTIME=$(test-tool chmtime --get file3) &&
|
|
test 123456789 = $MTIME
|
|
'
|
|
|
|
test_expect_success 'reword' '
|
|
git checkout -b reword-branch master &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 2 3 reword 4" FAKE_COMMIT_MESSAGE="E changed" \
|
|
git rebase -i A &&
|
|
git show HEAD | grep "E changed" &&
|
|
test $(git rev-parse master) != $(git rev-parse HEAD) &&
|
|
test $(git rev-parse master^) = $(git rev-parse HEAD^) &&
|
|
FAKE_LINES="1 2 reword 3 4" FAKE_COMMIT_MESSAGE="D changed" \
|
|
git rebase -i A &&
|
|
git show HEAD^ | grep "D changed" &&
|
|
FAKE_LINES="reword 1 2 3 4" FAKE_COMMIT_MESSAGE="B changed" \
|
|
git rebase -i A &&
|
|
git show HEAD~3 | grep "B changed" &&
|
|
FAKE_LINES="1 r 2 pick 3 p 4" FAKE_COMMIT_MESSAGE="C changed" \
|
|
git rebase -i A
|
|
) &&
|
|
git show HEAD~2 | grep "C changed"
|
|
'
|
|
|
|
test_expect_success 'rebase -i can copy notes' '
|
|
git config notes.rewrite.rebase true &&
|
|
git config notes.rewriteRef "refs/notes/*" &&
|
|
test_commit n1 &&
|
|
test_commit n2 &&
|
|
test_commit n3 &&
|
|
git notes add -m"a note" n3 &&
|
|
set_fake_editor &&
|
|
git rebase -i --onto n1 n2 &&
|
|
test "a note" = "$(git notes show HEAD)"
|
|
'
|
|
|
|
test_expect_success 'rebase -i can copy notes over a fixup' '
|
|
cat >expect <<-\EOF &&
|
|
an earlier note
|
|
|
|
a note
|
|
EOF
|
|
git reset --hard n3 &&
|
|
git notes add -m"an earlier note" n2 &&
|
|
(
|
|
set_fake_editor &&
|
|
GIT_NOTES_REWRITE_MODE=concatenate FAKE_LINES="1 f 2" \
|
|
git rebase -i n1
|
|
) &&
|
|
git notes show > output &&
|
|
test_cmp expect output
|
|
'
|
|
|
|
test_expect_success 'rebase while detaching HEAD' '
|
|
git symbolic-ref HEAD &&
|
|
grandparent=$(git rev-parse HEAD~2) &&
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="2 1" git rebase -i HEAD~2 HEAD^0
|
|
) &&
|
|
test $grandparent = $(git rev-parse HEAD~2) &&
|
|
test_must_fail git symbolic-ref HEAD
|
|
'
|
|
|
|
test_tick # Ensure that the rebased commits get a different timestamp.
|
|
test_expect_success 'always cherry-pick with --no-ff' '
|
|
git checkout no-ff-branch &&
|
|
git tag original-no-ff-branch &&
|
|
set_fake_editor &&
|
|
git rebase -i --no-ff A &&
|
|
for p in 0 1 2
|
|
do
|
|
test ! $(git rev-parse HEAD~$p) = $(git rev-parse original-no-ff-branch~$p) &&
|
|
git diff HEAD~$p original-no-ff-branch~$p > out &&
|
|
test_must_be_empty out
|
|
done &&
|
|
test $(git rev-parse HEAD~3) = $(git rev-parse original-no-ff-branch~3) &&
|
|
git diff HEAD~3 original-no-ff-branch~3 > out &&
|
|
test_must_be_empty out
|
|
'
|
|
|
|
test_expect_success 'set up commits with funny messages' '
|
|
git checkout -b funny A &&
|
|
echo >>file1 &&
|
|
test_tick &&
|
|
git commit -a -m "end with slash\\" &&
|
|
echo >>file1 &&
|
|
test_tick &&
|
|
git commit -a -m "something (\000) that looks like octal" &&
|
|
echo >>file1 &&
|
|
test_tick &&
|
|
git commit -a -m "something (\n) that looks like a newline" &&
|
|
echo >>file1 &&
|
|
test_tick &&
|
|
git commit -a -m "another commit"
|
|
'
|
|
|
|
test_expect_success 'rebase-i history with funny messages' '
|
|
git rev-list A..funny >expect &&
|
|
test_tick &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 2 3 4" git rebase -i A
|
|
) &&
|
|
git rev-list A.. >actual &&
|
|
test_cmp expect actual
|
|
'
|
|
|
|
test_expect_success 'prepare for rebase -i --exec' '
|
|
git checkout master &&
|
|
git checkout -b execute &&
|
|
test_commit one_exec main.txt one_exec &&
|
|
test_commit two_exec main.txt two_exec &&
|
|
test_commit three_exec main.txt three_exec
|
|
'
|
|
|
|
test_expect_success 'running "git rebase -i --exec git show HEAD"' '
|
|
(
|
|
set_fake_editor &&
|
|
git rebase -i --exec "git show HEAD" HEAD~2 >actual &&
|
|
FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
|
|
export FAKE_LINES &&
|
|
git rebase -i HEAD~2 >expect
|
|
) &&
|
|
sed -e "1,9d" expect >expected &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'running "git rebase --exec git show HEAD -i"' '
|
|
git reset --hard execute &&
|
|
(
|
|
set_fake_editor &&
|
|
git rebase --exec "git show HEAD" -i HEAD~2 >actual &&
|
|
FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
|
|
export FAKE_LINES &&
|
|
git rebase -i HEAD~2 >expect
|
|
) &&
|
|
sed -e "1,9d" expect >expected &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'running "git rebase -ix git show HEAD"' '
|
|
git reset --hard execute &&
|
|
(
|
|
set_fake_editor &&
|
|
git rebase -ix "git show HEAD" HEAD~2 >actual &&
|
|
FAKE_LINES="1 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
|
|
export FAKE_LINES &&
|
|
git rebase -i HEAD~2 >expect
|
|
) &&
|
|
sed -e "1,9d" expect >expected &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
|
|
test_expect_success 'rebase -ix with several <CMD>' '
|
|
git reset --hard execute &&
|
|
(
|
|
set_fake_editor &&
|
|
git rebase -ix "git show HEAD; pwd" HEAD~2 >actual &&
|
|
FAKE_LINES="1 exec_git_show_HEAD;_pwd 2 exec_git_show_HEAD;_pwd" &&
|
|
export FAKE_LINES &&
|
|
git rebase -i HEAD~2 >expect
|
|
) &&
|
|
sed -e "1,9d" expect >expected &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'rebase -ix with several instances of --exec' '
|
|
git reset --hard execute &&
|
|
(
|
|
set_fake_editor &&
|
|
git rebase -i --exec "git show HEAD" --exec "pwd" HEAD~2 >actual &&
|
|
FAKE_LINES="1 exec_git_show_HEAD exec_pwd 2
|
|
exec_git_show_HEAD exec_pwd" &&
|
|
export FAKE_LINES &&
|
|
git rebase -i HEAD~2 >expect
|
|
) &&
|
|
sed -e "1,11d" expect >expected &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success C_LOCALE_OUTPUT 'rebase -ix with --autosquash' '
|
|
git reset --hard execute &&
|
|
git checkout -b autosquash &&
|
|
echo second >second.txt &&
|
|
git add second.txt &&
|
|
git commit -m "fixup! two_exec" &&
|
|
echo bis >bis.txt &&
|
|
git add bis.txt &&
|
|
git commit -m "fixup! two_exec" &&
|
|
git checkout -b autosquash_actual &&
|
|
git rebase -i --exec "git show HEAD" --autosquash HEAD~4 >actual &&
|
|
git checkout autosquash &&
|
|
(
|
|
set_fake_editor &&
|
|
git checkout -b autosquash_expected &&
|
|
FAKE_LINES="1 fixup 3 fixup 4 exec_git_show_HEAD 2 exec_git_show_HEAD" &&
|
|
export FAKE_LINES &&
|
|
git rebase -i HEAD~4 >expect
|
|
) &&
|
|
sed -e "1,13d" expect >expected &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'rebase --exec works without -i ' '
|
|
git reset --hard execute &&
|
|
rm -rf exec_output &&
|
|
EDITOR="echo >invoked_editor" git rebase --exec "echo a line >>exec_output" HEAD~2 2>actual &&
|
|
test_i18ngrep "Successfully rebased and updated" actual &&
|
|
test_line_count = 2 exec_output &&
|
|
test_path_is_missing invoked_editor
|
|
'
|
|
|
|
test_expect_success 'rebase -i --exec without <CMD>' '
|
|
git reset --hard execute &&
|
|
set_fake_editor &&
|
|
test_must_fail git rebase -i --exec 2>actual &&
|
|
test_i18ngrep "requires a value" actual &&
|
|
git checkout master
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root re-order and drop commits' '
|
|
git checkout E &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="3 1 2 5" git rebase -i --root
|
|
) &&
|
|
test E = $(git cat-file commit HEAD | sed -ne \$p) &&
|
|
test B = $(git cat-file commit HEAD^ | sed -ne \$p) &&
|
|
test A = $(git cat-file commit HEAD^^ | sed -ne \$p) &&
|
|
test C = $(git cat-file commit HEAD^^^ | sed -ne \$p) &&
|
|
test 0 = $(git cat-file commit HEAD^^^ | grep -c ^parent\ )
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root retain root commit author and message' '
|
|
git checkout A &&
|
|
echo B >file7 &&
|
|
git add file7 &&
|
|
GIT_AUTHOR_NAME="Twerp Snog" git commit -m "different author" &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="2" git rebase -i --root
|
|
) &&
|
|
git cat-file commit HEAD | grep -q "^author Twerp Snog" &&
|
|
git cat-file commit HEAD | grep -q "^different author$"
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root temporary sentinel commit' '
|
|
git checkout B &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="2" git rebase -i --root
|
|
) &&
|
|
git cat-file commit HEAD | grep "^tree 4b825dc642cb" &&
|
|
git rebase --abort
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root fixup root commit' '
|
|
git checkout B &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 fixup 2" git rebase -i --root
|
|
) &&
|
|
test A = $(git cat-file commit HEAD | sed -ne \$p) &&
|
|
test B = $(git show HEAD:file1) &&
|
|
test 0 = $(git cat-file commit HEAD | grep -c ^parent\ )
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root reword original root commit' '
|
|
test_when_finished "test_might_fail git rebase --abort" &&
|
|
git checkout -b reword-original-root-branch master &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="reword 1 2" FAKE_COMMIT_MESSAGE="A changed" \
|
|
git rebase -i --root
|
|
) &&
|
|
git show HEAD^ | grep "A changed" &&
|
|
test -z "$(git show -s --format=%p HEAD^)"
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root reword new root commit' '
|
|
test_when_finished "test_might_fail git rebase --abort" &&
|
|
git checkout -b reword-now-root-branch master &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="reword 3 1" FAKE_COMMIT_MESSAGE="C changed" \
|
|
git rebase -i --root
|
|
) &&
|
|
git show HEAD^ | grep "C changed" &&
|
|
test -z "$(git show -s --format=%p HEAD^)"
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root when root has untracked file conflict' '
|
|
test_when_finished "reset_rebase" &&
|
|
git checkout -b failing-root-pick A &&
|
|
echo x >file2 &&
|
|
git rm file1 &&
|
|
git commit -m "remove file 1 add file 2" &&
|
|
echo z >file1 &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 2" git rebase -i --root
|
|
) &&
|
|
rm file1 &&
|
|
git rebase --continue &&
|
|
test "$(git log -1 --format=%B)" = "remove file 1 add file 2" &&
|
|
test "$(git rev-list --count HEAD)" = 2
|
|
'
|
|
|
|
test_expect_success 'rebase -i --root reword root when root has untracked file conflict' '
|
|
test_when_finished "reset_rebase" &&
|
|
echo z>file1 &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="reword 1 2" \
|
|
FAKE_COMMIT_MESSAGE="Modified A" git rebase -i --root &&
|
|
rm file1 &&
|
|
FAKE_COMMIT_MESSAGE="Reworded A" git rebase --continue
|
|
) &&
|
|
test "$(git log -1 --format=%B HEAD^)" = "Reworded A" &&
|
|
test "$(git rev-list --count HEAD)" = 2
|
|
'
|
|
|
|
test_expect_success C_LOCALE_OUTPUT 'rebase --edit-todo does not work on non-interactive rebase' '
|
|
git checkout reword-original-root-branch &&
|
|
git reset --hard &&
|
|
git checkout conflict-branch &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail git rebase --onto HEAD~2 HEAD~ &&
|
|
test_must_fail git rebase --edit-todo
|
|
) &&
|
|
git rebase --abort
|
|
'
|
|
|
|
test_expect_success 'rebase --edit-todo can be used to modify todo' '
|
|
git reset --hard &&
|
|
git checkout no-conflict-branch^0 &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1 2 3" git rebase -i HEAD~3 &&
|
|
FAKE_LINES="2 1" git rebase --edit-todo &&
|
|
git rebase --continue
|
|
) &&
|
|
test M = $(git cat-file commit HEAD^ | sed -ne \$p) &&
|
|
test L = $(git cat-file commit HEAD | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'rebase -i produces readable reflog' '
|
|
git reset --hard &&
|
|
git branch -f branch-reflog-test H &&
|
|
set_fake_editor &&
|
|
git rebase -i --onto I F branch-reflog-test &&
|
|
cat >expect <<-\EOF &&
|
|
rebase -i (finish): returning to refs/heads/branch-reflog-test
|
|
rebase -i (pick): H
|
|
rebase -i (pick): G
|
|
rebase -i (start): checkout I
|
|
EOF
|
|
git reflog -n4 HEAD |
|
|
sed "s/[^:]*: //" >actual &&
|
|
test_cmp expect actual
|
|
'
|
|
|
|
test_expect_success 'rebase -i respects core.commentchar' '
|
|
git reset --hard &&
|
|
git checkout E^0 &&
|
|
test_config core.commentchar "\\" &&
|
|
write_script remove-all-but-first.sh <<-\EOF &&
|
|
sed -e "2,\$s/^/\\\\/" "$1" >"$1.tmp" &&
|
|
mv "$1.tmp" "$1"
|
|
EOF
|
|
(
|
|
test_set_editor "$(pwd)/remove-all-but-first.sh" &&
|
|
git rebase -i B
|
|
) &&
|
|
test B = $(git cat-file commit HEAD^ | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'rebase -i respects core.commentchar=auto' '
|
|
test_config core.commentchar auto &&
|
|
write_script copy-edit-script.sh <<-\EOF &&
|
|
cp "$1" edit-script
|
|
EOF
|
|
test_when_finished "git rebase --abort || :" &&
|
|
(
|
|
test_set_editor "$(pwd)/copy-edit-script.sh" &&
|
|
git rebase -i HEAD^
|
|
) &&
|
|
test -z "$(grep -ve "^#" -e "^\$" -e "^pick" edit-script)"
|
|
'
|
|
|
|
test_expect_success 'rebase -i, with <onto> and <upstream> specified as :/quuxery' '
|
|
test_when_finished "git branch -D torebase" &&
|
|
git checkout -b torebase branch1 &&
|
|
upstream=$(git rev-parse ":/J") &&
|
|
onto=$(git rev-parse ":/A") &&
|
|
git rebase --onto $onto $upstream &&
|
|
git reset --hard branch1 &&
|
|
git rebase --onto ":/A" ":/J" &&
|
|
git checkout branch1
|
|
'
|
|
|
|
test_expect_success 'rebase -i with --strategy and -X' '
|
|
git checkout -b conflict-merge-use-theirs conflict-branch &&
|
|
git reset --hard HEAD^ &&
|
|
echo five >conflict &&
|
|
echo Z >file1 &&
|
|
git commit -a -m "one file conflict" &&
|
|
EDITOR=true git rebase -i --strategy=recursive -Xours conflict-branch &&
|
|
test $(git show conflict-branch:conflict) = $(cat conflict) &&
|
|
test $(cat file1) = Z
|
|
'
|
|
|
|
test_expect_success 'interrupted rebase -i with --strategy and -X' '
|
|
git checkout -b conflict-merge-use-theirs-interrupted conflict-branch &&
|
|
git reset --hard HEAD^ &&
|
|
>breakpoint &&
|
|
git add breakpoint &&
|
|
git commit -m "breakpoint for interactive mode" &&
|
|
echo five >conflict &&
|
|
echo Z >file1 &&
|
|
git commit -a -m "one file conflict" &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1 2" git rebase -i --strategy=recursive \
|
|
-Xours conflict-branch
|
|
) &&
|
|
git rebase --continue &&
|
|
test $(git show conflict-branch:conflict) = $(cat conflict) &&
|
|
test $(cat file1) = Z
|
|
'
|
|
|
|
test_expect_success 'rebase -i error on commits with \ in message' '
|
|
current_head=$(git rev-parse HEAD) &&
|
|
test_when_finished "git rebase --abort; git reset --hard $current_head; rm -f error" &&
|
|
test_commit TO-REMOVE will-conflict old-content &&
|
|
test_commit "\temp" will-conflict new-content dummy &&
|
|
test_must_fail env EDITOR=true git rebase -i HEAD^ --onto HEAD^^ 2>error &&
|
|
test_expect_code 1 grep " emp" error
|
|
'
|
|
|
|
test_expect_success 'short SHA-1 setup' '
|
|
test_when_finished "git checkout master" &&
|
|
git checkout --orphan collide &&
|
|
git rm -rf . &&
|
|
(
|
|
unset test_tick &&
|
|
test_commit collide1 collide &&
|
|
test_commit --notick collide2 collide &&
|
|
test_commit --notick collide3 collide
|
|
)
|
|
'
|
|
|
|
test_expect_success 'short SHA-1 collide' '
|
|
test_when_finished "reset_rebase && git checkout master" &&
|
|
git checkout collide &&
|
|
(
|
|
unset test_tick &&
|
|
test_tick &&
|
|
set_fake_editor &&
|
|
FAKE_COMMIT_MESSAGE="collide2 ac4f2ee" \
|
|
FAKE_LINES="reword 1 2" git rebase -i HEAD~2
|
|
)
|
|
'
|
|
|
|
test_expect_success 'respect core.abbrev' '
|
|
git config core.abbrev 12 &&
|
|
(
|
|
set_cat_todo_editor &&
|
|
test_must_fail git rebase -i HEAD~4 >todo-list
|
|
) &&
|
|
test 4 = $(grep -c "pick [0-9a-f]\{12,\}" todo-list)
|
|
'
|
|
|
|
test_expect_success 'todo count' '
|
|
write_script dump-raw.sh <<-\EOF &&
|
|
cat "$1"
|
|
EOF
|
|
(
|
|
test_set_editor "$(pwd)/dump-raw.sh" &&
|
|
git rebase -i HEAD~4 >actual
|
|
) &&
|
|
test_i18ngrep "^# Rebase ..* onto ..* ([0-9]" actual
|
|
'
|
|
|
|
test_expect_success 'rebase -i commits that overwrite untracked files (pick)' '
|
|
git checkout --force branch2 &&
|
|
git clean -f &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1 2" git rebase -i A
|
|
) &&
|
|
test_cmp_rev HEAD F &&
|
|
test_path_is_missing file6 &&
|
|
>file6 &&
|
|
test_must_fail git rebase --continue &&
|
|
test_cmp_rev HEAD F &&
|
|
rm file6 &&
|
|
git rebase --continue &&
|
|
test_cmp_rev HEAD I
|
|
'
|
|
|
|
test_expect_success 'rebase -i commits that overwrite untracked files (squash)' '
|
|
git checkout --force branch2 &&
|
|
git clean -f &&
|
|
git tag original-branch2 &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1 squash 2" git rebase -i A
|
|
) &&
|
|
test_cmp_rev HEAD F &&
|
|
test_path_is_missing file6 &&
|
|
>file6 &&
|
|
test_must_fail git rebase --continue &&
|
|
test_cmp_rev HEAD F &&
|
|
rm file6 &&
|
|
git rebase --continue &&
|
|
test $(git cat-file commit HEAD | sed -ne \$p) = I &&
|
|
git reset --hard original-branch2
|
|
'
|
|
|
|
test_expect_success 'rebase -i commits that overwrite untracked files (no ff)' '
|
|
git checkout --force branch2 &&
|
|
git clean -f &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1 2" git rebase -i --no-ff A
|
|
) &&
|
|
test $(git cat-file commit HEAD | sed -ne \$p) = F &&
|
|
test_path_is_missing file6 &&
|
|
>file6 &&
|
|
test_must_fail git rebase --continue &&
|
|
test $(git cat-file commit HEAD | sed -ne \$p) = F &&
|
|
rm file6 &&
|
|
git rebase --continue &&
|
|
test $(git cat-file commit HEAD | sed -ne \$p) = I
|
|
'
|
|
|
|
test_expect_success 'rebase --continue removes CHERRY_PICK_HEAD' '
|
|
git checkout -b commit-to-skip &&
|
|
for double in X 3 1
|
|
do
|
|
test_seq 5 | sed "s/$double/&&/" >seq &&
|
|
git add seq &&
|
|
test_tick &&
|
|
git commit -m seq-$double
|
|
done &&
|
|
git tag seq-onto &&
|
|
git reset --hard HEAD~2 &&
|
|
git cherry-pick seq-onto &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES= git rebase -i seq-onto
|
|
) &&
|
|
test -d .git/rebase-merge &&
|
|
git rebase --continue &&
|
|
git diff --exit-code seq-onto &&
|
|
test ! -d .git/rebase-merge &&
|
|
test ! -f .git/CHERRY_PICK_HEAD
|
|
'
|
|
|
|
rebase_setup_and_clean () {
|
|
test_when_finished "
|
|
git checkout master &&
|
|
test_might_fail git branch -D $1 &&
|
|
test_might_fail git rebase --abort
|
|
" &&
|
|
git checkout -b $1 ${2:-master}
|
|
}
|
|
|
|
test_expect_success 'drop' '
|
|
rebase_setup_and_clean drop-test &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 drop 2 3 d 4 5" git rebase -i --root
|
|
) &&
|
|
test E = $(git cat-file commit HEAD | sed -ne \$p) &&
|
|
test C = $(git cat-file commit HEAD^ | sed -ne \$p) &&
|
|
test A = $(git cat-file commit HEAD^^ | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'rebase -i respects rebase.missingCommitsCheck = ignore' '
|
|
test_config rebase.missingCommitsCheck ignore &&
|
|
rebase_setup_and_clean missing-commit &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 2 3 4" git rebase -i --root 2>actual
|
|
) &&
|
|
test D = $(git cat-file commit HEAD | sed -ne \$p) &&
|
|
test_i18ngrep \
|
|
"Successfully rebased and updated refs/heads/missing-commit" \
|
|
actual
|
|
'
|
|
|
|
test_expect_success 'rebase -i respects rebase.missingCommitsCheck = warn' '
|
|
cat >expect <<-EOF &&
|
|
Warning: some commits may have been dropped accidentally.
|
|
Dropped commits (newer to older):
|
|
- $(git rev-list --pretty=oneline --abbrev-commit -1 master)
|
|
To avoid this message, use "drop" to explicitly remove a commit.
|
|
EOF
|
|
test_config rebase.missingCommitsCheck warn &&
|
|
rebase_setup_and_clean missing-commit &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="1 2 3 4" git rebase -i --root 2>actual.2
|
|
) &&
|
|
head -n4 actual.2 >actual &&
|
|
test_i18ncmp expect actual &&
|
|
test D = $(git cat-file commit HEAD | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'rebase -i respects rebase.missingCommitsCheck = error' '
|
|
cat >expect <<-EOF &&
|
|
Warning: some commits may have been dropped accidentally.
|
|
Dropped commits (newer to older):
|
|
- $(git rev-list --pretty=oneline --abbrev-commit -1 master)
|
|
- $(git rev-list --pretty=oneline --abbrev-commit -1 master~2)
|
|
To avoid this message, use "drop" to explicitly remove a commit.
|
|
|
|
Use '\''git config rebase.missingCommitsCheck'\'' to change the level of warnings.
|
|
The possible behaviours are: ignore, warn, error.
|
|
|
|
You can fix this with '\''git rebase --edit-todo'\'' and then run '\''git rebase --continue'\''.
|
|
Or you can abort the rebase with '\''git rebase --abort'\''.
|
|
EOF
|
|
test_config rebase.missingCommitsCheck error &&
|
|
rebase_setup_and_clean missing-commit &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 2 4" \
|
|
git rebase -i --root 2>actual &&
|
|
test_i18ncmp expect actual &&
|
|
cp .git/rebase-merge/git-rebase-todo.backup \
|
|
.git/rebase-merge/git-rebase-todo &&
|
|
FAKE_LINES="1 2 drop 3 4 drop 5" git rebase --edit-todo
|
|
) &&
|
|
git rebase --continue &&
|
|
test D = $(git cat-file commit HEAD | sed -ne \$p) &&
|
|
test B = $(git cat-file commit HEAD^ | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'respects rebase.abbreviateCommands with fixup, squash and exec' '
|
|
rebase_setup_and_clean abbrevcmd &&
|
|
test_commit "first" file1.txt "first line" first &&
|
|
test_commit "second" file1.txt "another line" second &&
|
|
test_commit "fixup! first" file2.txt "first line again" first_fixup &&
|
|
test_commit "squash! second" file1.txt "another line here" second_squash &&
|
|
cat >expected <<-EOF &&
|
|
p $(git rev-list --abbrev-commit -1 first) first
|
|
f $(git rev-list --abbrev-commit -1 first_fixup) fixup! first
|
|
x git show HEAD
|
|
p $(git rev-list --abbrev-commit -1 second) second
|
|
s $(git rev-list --abbrev-commit -1 second_squash) squash! second
|
|
x git show HEAD
|
|
EOF
|
|
git checkout abbrevcmd &&
|
|
test_config rebase.abbreviateCommands true &&
|
|
(
|
|
set_cat_todo_editor &&
|
|
test_must_fail git rebase -i --exec "git show HEAD" \
|
|
--autosquash master >actual
|
|
) &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'static check of bad command' '
|
|
rebase_setup_and_clean bad-cmd &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 2 3 bad 4 5" \
|
|
git rebase -i --root 2>actual &&
|
|
test_i18ngrep "badcmd $(git rev-list --oneline -1 master~1)" \
|
|
actual &&
|
|
test_i18ngrep "You can fix this with .git rebase --edit-todo.." \
|
|
actual &&
|
|
FAKE_LINES="1 2 3 drop 4 5" git rebase --edit-todo
|
|
) &&
|
|
git rebase --continue &&
|
|
test E = $(git cat-file commit HEAD | sed -ne \$p) &&
|
|
test C = $(git cat-file commit HEAD^ | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'tabs and spaces are accepted in the todolist' '
|
|
rebase_setup_and_clean indented-comment &&
|
|
write_script add-indent.sh <<-\EOF &&
|
|
(
|
|
# Turn single spaces into space/tab mix
|
|
sed "1s/ / /g; 2s/ / /g; 3s/ / /g" "$1"
|
|
printf "\n\t# comment\n #more\n\t # comment\n"
|
|
) >"$1.new"
|
|
mv "$1.new" "$1"
|
|
EOF
|
|
(
|
|
test_set_editor "$(pwd)/add-indent.sh" &&
|
|
git rebase -i HEAD^^^
|
|
) &&
|
|
test E = $(git cat-file commit HEAD | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'static check of bad SHA-1' '
|
|
rebase_setup_and_clean bad-sha &&
|
|
(
|
|
set_fake_editor &&
|
|
test_must_fail env FAKE_LINES="1 2 edit fakesha 3 4 5 #" \
|
|
git rebase -i --root 2>actual &&
|
|
test_i18ngrep "edit XXXXXXX False commit" actual &&
|
|
test_i18ngrep "You can fix this with .git rebase --edit-todo.." \
|
|
actual &&
|
|
FAKE_LINES="1 2 4 5 6" git rebase --edit-todo
|
|
) &&
|
|
git rebase --continue &&
|
|
test E = $(git cat-file commit HEAD | sed -ne \$p)
|
|
'
|
|
|
|
test_expect_success 'editor saves as CR/LF' '
|
|
git checkout -b with-crlf &&
|
|
write_script add-crs.sh <<-\EOF &&
|
|
sed -e "s/\$/Q/" <"$1" | tr Q "\\015" >"$1".new &&
|
|
mv -f "$1".new "$1"
|
|
EOF
|
|
(
|
|
test_set_editor "$(pwd)/add-crs.sh" &&
|
|
git rebase -i HEAD^
|
|
)
|
|
'
|
|
|
|
SQ="'"
|
|
test_expect_success 'rebase -i --gpg-sign=<key-id>' '
|
|
test_when_finished "test_might_fail git rebase --abort" &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" \
|
|
HEAD^ >out 2>err
|
|
) &&
|
|
test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err
|
|
'
|
|
|
|
test_expect_success 'rebase -i --gpg-sign=<key-id> overrides commit.gpgSign' '
|
|
test_when_finished "test_might_fail git rebase --abort" &&
|
|
test_config commit.gpgsign true &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="edit 1" git rebase -i --gpg-sign="\"S I Gner\"" \
|
|
HEAD^ >out 2>err
|
|
) &&
|
|
test_i18ngrep "$SQ-S\"S I Gner\"$SQ" err
|
|
'
|
|
|
|
test_expect_success 'valid author header after --root swap' '
|
|
rebase_setup_and_clean author-header no-conflict-branch &&
|
|
git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit &&
|
|
git cat-file commit HEAD | grep ^author >expected &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="5 1" git rebase -i --root
|
|
) &&
|
|
git cat-file commit HEAD^ | grep ^author >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_expect_success 'valid author header when author contains single quote' '
|
|
rebase_setup_and_clean author-header no-conflict-branch &&
|
|
git commit --amend --author="Au ${SQ}thor <author@example.com>" --no-edit &&
|
|
git cat-file commit HEAD | grep ^author >expected &&
|
|
(
|
|
set_fake_editor &&
|
|
FAKE_LINES="2" git rebase -i HEAD~2
|
|
) &&
|
|
git cat-file commit HEAD | grep ^author >actual &&
|
|
test_cmp expected actual
|
|
'
|
|
|
|
test_done
|