undef/git-commit-vandalism
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f23ffbe890
git-commit-vandalism/Documentation/git-bisect.txt
Gerrit Pape ee831f7ddf git-bisect.sh: don't accidentally override existing branch "bisect" 
If a branch named "bisect" or "new-bisect" already was created in the
repo by other means than git bisect, doing a git bisect used to override
the branch without a warning.  Now if the branch "bisect" or
"new-bisect" already exists, and it was not created by git bisect itself,
git bisect start fails with an appropriate error message.  Additionally,
if checking out a new bisect state fails due to a merge problem, git
bisect cleans up the temporary branch "new-bisect".

The accidental override has been noticed by Andres Salomon, reported
through
 http://bugs.debian.org/478647

Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05 17:18:20 -07:00

231 lines
7.0 KiB
Plaintext
Raw Blame History

git-bisect(1)
=============
NAME
----
git-bisect - Find the change that introduced a bug by binary search
SYNOPSIS
--------
'git bisect' <subcommand> <options>
DESCRIPTION
-----------
The command takes various subcommands, and different options depending
on the subcommand:
git bisect start [<bad> [<good>...]] [--] [<paths>...]
git bisect bad [<rev>]
git bisect good [<rev>...]
git bisect skip [<rev>...]
git bisect reset [<branch>]
git bisect visualize
git bisect replay <logfile>
git bisect log
git bisect run <cmd>...
This command uses 'git-rev-list --bisect' option to help drive the
binary search process to find which change introduced a bug, given an
old "good" commit object name and a later "bad" commit object name.
Basic bisect commands: start, bad, good
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The way you use it is:
------------------------------------------------
$ git bisect start
$ git bisect bad # Current version is bad
$ git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version
# tested that was good
------------------------------------------------
When you give at least one bad and one good versions, it will bisect
the revision tree and say something like:
------------------------------------------------
Bisecting: 675 revisions left to test after this
------------------------------------------------
and check out the state in the middle. Now, compile that kernel, and
boot it. Now, let's say that this booted kernel works fine, then just
do
------------------------------------------------
$ git bisect good # this one is good
------------------------------------------------
which will now say
------------------------------------------------
Bisecting: 337 revisions left to test after this
------------------------------------------------
and you continue along, compiling that one, testing it, and depending
on whether it is good or bad, you say "git bisect good" or "git bisect
bad", and ask for the next bisection.
Until you have no more left, and you'll have been left with the first
bad kernel rev in "refs/bisect/bad".
Bisect reset
~~~~~~~~~~~~
Oh, and then after you want to reset to the original head, do a
------------------------------------------------
$ git bisect reset
------------------------------------------------
to get back to the original branch, instead of being in one of the
bisection branches ("git bisect start" will do that for you too,
actually: it will reset the bisection state, and before it does that
it checks that you're not using some old bisection branch).
Bisect visualize
~~~~~~~~~~~~~~~~
During the bisection process, you can say
------------
$ git bisect visualize
------------
to see the currently remaining suspects in `gitk`. `visualize` is a bit
too long to type and `view` is provided as a synonym.
If `DISPLAY` environment variable is not set, `git log` is used
instead. You can even give command line options such as `-p` and
`--stat`.
------------
$ git bisect view --stat
------------
Bisect log and bisect replay
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The good/bad input is logged, and
------------
$ git bisect log
------------
shows what you have done so far. You can truncate its output somewhere
and save it in a file, and run
------------
$ git bisect replay that-file
------------
if you find later you made a mistake telling good/bad about a
revision.
Avoiding to test a commit
~~~~~~~~~~~~~~~~~~~~~~~~~
If in a middle of bisect session, you know what the bisect suggested
to try next is not a good one to test (e.g. the change the commit
introduces is known not to work in your environment and you know it
does not have anything to do with the bug you are chasing), you may
want to find a near-by commit and try that instead.
It goes something like this:
------------
$ git bisect good/bad # previous round was good/bad.
Bisecting: 337 revisions left to test after this
$ git bisect visualize # oops, that is uninteresting.
$ git reset --hard HEAD~3 # try 3 revs before what
# was suggested
------------
Then compile and test the one you chose to try. After that, tell
bisect what the result was as usual.
Bisect skip
~~~~~~~~~~~~
Instead of choosing by yourself a nearby commit, you may just want git
to do it for you using:
------------
$ git bisect skip # Current version cannot be tested
------------
But computing the commit to test may be slower afterwards and git may
eventually not be able to tell the first bad among a bad and one or
more "skip"ped commits.
Cutting down bisection by giving more parameters to bisect start
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You can further cut down the number of trials if you know what part of
the tree is involved in the problem you are tracking down, by giving
paths parameters when you say `bisect start`, like this:
------------
$ git bisect start -- arch/i386 include/asm-i386
------------
If you know beforehand more than one good commits, you can narrow the
bisect space down without doing the whole tree checkout every time you
give good commits. You give the bad revision immediately after `start`
and then you give all the good revisions you have:
------------
$ git bisect start v2.6.20-rc6 v2.6.20-rc4 v2.6.20-rc1 --
# v2.6.20-rc6 is bad
# v2.6.20-rc4 and v2.6.20-rc1 are good
------------
Bisect run
~~~~~~~~~~
If you have a script that can tell if the current source code is good
or bad, you can automatically bisect using:
------------
$ git bisect run my_script
------------
Note that the "run" script (`my_script` in the above example) should
exit with code 0 in case the current source code is good. Exit with a
code between 1 and 127 (inclusive), except 125, if the current
source code is bad.
Any other exit code will abort the automatic bisect process. (A
program that does "exit(-1)" leaves $? = 255, see exit(3) manual page,
the value is chopped with "& 0377".)
The special exit code 125 should be used when the current source code
cannot be tested. If the "run" script exits with this code, the current
revision will be skipped, see `git bisect skip` above.
You may often find that during bisect you want to have near-constant
tweaks (e.g., s/#define DEBUG 0/#define DEBUG 1/ in a header file, or
"revision that does not have this commit needs this patch applied to
work around other problem this bisection is not interested in")
applied to the revision being tested.
To cope with such a situation, after the inner git-bisect finds the
next revision to test, with the "run" script, you can apply that tweak
before compiling, run the real test, and after the test decides if the
revision (possibly with the needed tweaks) passed the test, rewind the
tree to the pristine state. Finally the "run" script can exit with
the status of the real test to let "git bisect run" command loop to
know the outcome.
Author
------
Written by Linus Torvalds <torvalds@osdl.org>
Documentation
-------------
Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
GIT
---
Part of the linkgit:git[7] suite
Reference in New Issue View Git Blame Copy Permalink