git-commit-vandalism/object-file.c

2843 lines
70 KiB
C
Raw Normal View History

/*
* GIT - The information manager from hell
*
* Copyright (C) Linus Torvalds, 2005
*
* This handles basic git object files - packing, unpacking,
* creation etc.
*/
#include "cache.h"
#include "config.h"
#include "string-list.h"
#include "lockfile.h"
#include "delta.h"
#include "pack.h"
#include "blob.h"
#include "commit.h"
#include "run-command.h"
#include "tag.h"
#include "tree.h"
#include "tree-walk.h"
#include "refs.h"
#include "pack-revindex.h"
#include "hash-lookup.h"
#include "bulk-checkin.h"
#include "repository.h"
#include "replace-object.h"
#include "streaming.h"
#include "dir.h"
#include "list.h"
#include "mergesort.h"
alternates: accept double-quoted paths We read lists of alternates from objects/info/alternates files (delimited by newline), as well as from the GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable (delimited by colon or semi-colon, depending on the platform). There's no mechanism for quoting the delimiters, so it's impossible to specify an alternate path that contains a colon in the environment, or one that contains a newline in a file. We've lived with that restriction for ages because both alternates and filenames with colons are relatively rare, and it's only a problem when the two meet. But since 722ff7f87 (receive-pack: quarantine objects until pre-receive accepts, 2016-10-03), which builds on the alternates system, every push causes the receiver to set GIT_ALTERNATE_OBJECT_DIRECTORIES internally. It would be convenient to have some way to quote the delimiter so that we can represent arbitrary paths. The simplest thing would be an escape character before a quoted delimiter (e.g., "\:" as a literal colon). But that creates a backwards compatibility problem: any path which uses that escape character is now broken, and we've just shifted the problem. We could choose an unlikely escape character (e.g., something from the non-printable ASCII range), but that's awkward to use. Instead, let's treat names as unquoted unless they begin with a double-quote, in which case they are interpreted via our usual C-stylke quoting rules. This also breaks backwards-compatibility, but in a smaller way: it only matters if your file has a double-quote as the very _first_ character in the path (whereas an escape character is a problem anywhere in the path). It's also consistent with many other parts of git, which accept either a bare pathname or a double-quoted one, and the sender can choose to quote or not as required. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-12 20:52:22 +01:00
#include "quote.h"
#include "packfile.h"
#include "object-store.h"
#include "promisor-remote.h"
submodule: lazily add submodule ODBs as alternates Teach Git to add submodule ODBs as alternates to the object store of the_repository only upon the first access of an object not in the_repository, and not when add_submodule_odb() is called. This provides a means of gradually migrating from accessing a submodule's object through alternates to accessing a submodule's object by explicitly passing its repository object. Any Git command can declare that it might access submodule objects by calling add_submodule_odb() (as they do now), but the submodule ODBs themselves will not be added until needed, so individual commands and/or combinations of arguments can be migrated one by one. [The advantage of explicit repository-object passing is code clarity (it is clear which repository an object read is from), performance (there is no need to linearly search through all submodule ODBs whenever an object is accessed from any repository, whether superproject or submodule), and the possibility of future features like partial clone submodules (which right now is not possible because if an object is missing, we do not know which repository to lazy-fetch into).] This commit also introduces an environment variable that a test may set to make the actual registration of alternates fatal, in order to demonstrate that its codepaths do not need this registration. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Emily Shaffer <emilyshaffer@google.com> Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-16 23:09:51 +02:00
#include "submodule.h"
/* The maximum size for an object header. */
#define MAX_HEADER_LEN 32
#define EMPTY_TREE_SHA1_BIN_LITERAL \
"\x4b\x82\x5d\xc6\x42\xcb\x6e\xb9\xa0\x60" \
"\xe5\x4b\xf8\xd6\x92\x88\xfb\xee\x49\x04"
#define EMPTY_TREE_SHA256_BIN_LITERAL \
"\x6e\xf1\x9b\x41\x22\x5c\x53\x69\xf1\xc1" \
"\x04\xd4\x5d\x8d\x85\xef\xa9\xb0\x57\xb5" \
"\x3b\x14\xb4\xb9\xb9\x39\xdd\x74\xde\xcc" \
"\x53\x21"
#define EMPTY_BLOB_SHA1_BIN_LITERAL \
"\xe6\x9d\xe2\x9b\xb2\xd1\xd6\x43\x4b\x8b" \
"\x29\xae\x77\x5a\xd8\xc2\xe4\x8c\x53\x91"
#define EMPTY_BLOB_SHA256_BIN_LITERAL \
"\x47\x3a\x0f\x4c\x3b\xe8\xa9\x36\x81\xa2" \
"\x67\xe3\xb1\xe9\xa7\xdc\xda\x11\x85\x43" \
"\x6f\xe1\x41\xf7\x74\x91\x20\xa3\x03\x72" \
"\x18\x13"
static const struct object_id empty_tree_oid = {
.hash = EMPTY_TREE_SHA1_BIN_LITERAL,
.algo = GIT_HASH_SHA1,
};
static const struct object_id empty_blob_oid = {
.hash = EMPTY_BLOB_SHA1_BIN_LITERAL,
.algo = GIT_HASH_SHA1,
};
static const struct object_id null_oid_sha1 = {
.hash = {0},
.algo = GIT_HASH_SHA1,
};
static const struct object_id empty_tree_oid_sha256 = {
.hash = EMPTY_TREE_SHA256_BIN_LITERAL,
.algo = GIT_HASH_SHA256,
};
static const struct object_id empty_blob_oid_sha256 = {
.hash = EMPTY_BLOB_SHA256_BIN_LITERAL,
.algo = GIT_HASH_SHA256,
};
static const struct object_id null_oid_sha256 = {
.hash = {0},
.algo = GIT_HASH_SHA256,
};
static void git_hash_sha1_init(git_hash_ctx *ctx)
2017-11-12 22:28:52 +01:00
{
git_SHA1_Init(&ctx->sha1);
2017-11-12 22:28:52 +01:00
}
static void git_hash_sha1_clone(git_hash_ctx *dst, const git_hash_ctx *src)
{
git_SHA1_Clone(&dst->sha1, &src->sha1);
}
static void git_hash_sha1_update(git_hash_ctx *ctx, const void *data, size_t len)
2017-11-12 22:28:52 +01:00
{
git_SHA1_Update(&ctx->sha1, data, len);
2017-11-12 22:28:52 +01:00
}
static void git_hash_sha1_final(unsigned char *hash, git_hash_ctx *ctx)
2017-11-12 22:28:52 +01:00
{
git_SHA1_Final(hash, &ctx->sha1);
2017-11-12 22:28:52 +01:00
}
static void git_hash_sha1_final_oid(struct object_id *oid, git_hash_ctx *ctx)
{
git_SHA1_Final(oid->hash, &ctx->sha1);
memset(oid->hash + GIT_SHA1_RAWSZ, 0, GIT_MAX_RAWSZ - GIT_SHA1_RAWSZ);
oid->algo = GIT_HASH_SHA1;
}
static void git_hash_sha256_init(git_hash_ctx *ctx)
{
git_SHA256_Init(&ctx->sha256);
}
static void git_hash_sha256_clone(git_hash_ctx *dst, const git_hash_ctx *src)
{
git_SHA256_Clone(&dst->sha256, &src->sha256);
}
static void git_hash_sha256_update(git_hash_ctx *ctx, const void *data, size_t len)
{
git_SHA256_Update(&ctx->sha256, data, len);
}
static void git_hash_sha256_final(unsigned char *hash, git_hash_ctx *ctx)
{
git_SHA256_Final(hash, &ctx->sha256);
}
static void git_hash_sha256_final_oid(struct object_id *oid, git_hash_ctx *ctx)
{
git_SHA256_Final(oid->hash, &ctx->sha256);
/*
* This currently does nothing, so the compiler should optimize it out,
* but keep it in case we extend the hash size again.
*/
memset(oid->hash + GIT_SHA256_RAWSZ, 0, GIT_MAX_RAWSZ - GIT_SHA256_RAWSZ);
oid->algo = GIT_HASH_SHA256;
}
static void git_hash_unknown_init(git_hash_ctx *ctx UNUSED)
2017-11-12 22:28:52 +01:00
{
BUG("trying to init unknown hash");
2017-11-12 22:28:52 +01:00
}
static void git_hash_unknown_clone(git_hash_ctx *dst UNUSED,
const git_hash_ctx *src UNUSED)
{
BUG("trying to clone unknown hash");
}
static void git_hash_unknown_update(git_hash_ctx *ctx UNUSED,
const void *data UNUSED,
size_t len UNUSED)
2017-11-12 22:28:52 +01:00
{
BUG("trying to update unknown hash");
2017-11-12 22:28:52 +01:00
}
static void git_hash_unknown_final(unsigned char *hash UNUSED,
git_hash_ctx *ctx UNUSED)
2017-11-12 22:28:52 +01:00
{
BUG("trying to finalize unknown hash");
2017-11-12 22:28:52 +01:00
}
static void git_hash_unknown_final_oid(struct object_id *oid UNUSED,
git_hash_ctx *ctx UNUSED)
{
BUG("trying to finalize unknown hash");
}
2017-11-12 22:28:52 +01:00
const struct git_hash_algo hash_algos[GIT_HASH_NALGOS] = {
{
.name = NULL,
.format_id = 0x00000000,
.rawsz = 0,
.hexsz = 0,
.blksz = 0,
.init_fn = git_hash_unknown_init,
.clone_fn = git_hash_unknown_clone,
.update_fn = git_hash_unknown_update,
.final_fn = git_hash_unknown_final,
.final_oid_fn = git_hash_unknown_final_oid,
.empty_tree = NULL,
.empty_blob = NULL,
.null_oid = NULL,
2017-11-12 22:28:52 +01:00
},
{
.name = "sha1",
.format_id = GIT_SHA1_FORMAT_ID,
.rawsz = GIT_SHA1_RAWSZ,
.hexsz = GIT_SHA1_HEXSZ,
.blksz = GIT_SHA1_BLKSZ,
.init_fn = git_hash_sha1_init,
.clone_fn = git_hash_sha1_clone,
.update_fn = git_hash_sha1_update,
.final_fn = git_hash_sha1_final,
.final_oid_fn = git_hash_sha1_final_oid,
.empty_tree = &empty_tree_oid,
.empty_blob = &empty_blob_oid,
.null_oid = &null_oid_sha1,
2017-11-12 22:28:52 +01:00
},
{
.name = "sha256",
.format_id = GIT_SHA256_FORMAT_ID,
.rawsz = GIT_SHA256_RAWSZ,
.hexsz = GIT_SHA256_HEXSZ,
.blksz = GIT_SHA256_BLKSZ,
.init_fn = git_hash_sha256_init,
.clone_fn = git_hash_sha256_clone,
.update_fn = git_hash_sha256_update,
.final_fn = git_hash_sha256_final,
.final_oid_fn = git_hash_sha256_final_oid,
.empty_tree = &empty_tree_oid_sha256,
.empty_blob = &empty_blob_oid_sha256,
.null_oid = &null_oid_sha256,
}
2017-11-12 22:28:52 +01:00
};
const struct object_id *null_oid(void)
{
return the_hash_algo->null_oid;
}
const char *empty_tree_oid_hex(void)
{
static char buf[GIT_MAX_HEXSZ + 1];
return oid_to_hex_r(buf, the_hash_algo->empty_tree);
}
const char *empty_blob_oid_hex(void)
{
static char buf[GIT_MAX_HEXSZ + 1];
return oid_to_hex_r(buf, the_hash_algo->empty_blob);
}
int hash_algo_by_name(const char *name)
{
int i;
if (!name)
return GIT_HASH_UNKNOWN;
for (i = 1; i < GIT_HASH_NALGOS; i++)
if (!strcmp(name, hash_algos[i].name))
return i;
return GIT_HASH_UNKNOWN;
}
int hash_algo_by_id(uint32_t format_id)
{
int i;
for (i = 1; i < GIT_HASH_NALGOS; i++)
if (format_id == hash_algos[i].format_id)
return i;
return GIT_HASH_UNKNOWN;
}
int hash_algo_by_length(int len)
{
int i;
for (i = 1; i < GIT_HASH_NALGOS; i++)
if (len == hash_algos[i].rawsz)
return i;
return GIT_HASH_UNKNOWN;
}
/*
* This is meant to hold a *small* number of objects that you would
* want read_object_file() to be able to return, but yet you do not want
* to write them into the object store (e.g. a browse-only
* application).
*/
static struct cached_object {
struct object_id oid;
enum object_type type;
void *buf;
unsigned long size;
} *cached_objects;
static int cached_object_nr, cached_object_alloc;
static struct cached_object empty_tree = {
.oid = {
.hash = EMPTY_TREE_SHA1_BIN_LITERAL,
},
.type = OBJ_TREE,
.buf = "",
};
static struct cached_object *find_cached_object(const struct object_id *oid)
{
int i;
struct cached_object *co = cached_objects;
for (i = 0; i < cached_object_nr; i++, co++) {
if (oideq(&co->oid, oid))
return co;
}
if (oideq(oid, the_hash_algo->empty_tree))
return &empty_tree;
return NULL;
}
static int get_conv_flags(unsigned flags)
{
if (flags & HASH_RENORMALIZE)
return CONV_EOL_RENORMALIZE;
else if (flags & HASH_WRITE_OBJECT)
return global_conv_flags_eol | CONV_WRITE_OBJECT;
else
return 0;
}
rerere: make sure it works even in a workdir attached to a young repository The git-new-workdir script in contrib/ makes a new work tree by sharing many subdirectories of the .git directory with the original repository. When rerere.enabled is set in the original repository, but the user has not encountered any conflicts yet, the original repository may not yet have .git/rr-cache directory. When rerere wants to run in a new work tree created from such a young original repository, it fails to mkdir(2) .git/rr-cache that is a symlink to a yet-to-be-created directory. There are three possible approaches to this: - A naive solution is not to create a symlink in the git-new-workdir script to a directory the original does not have (yet). This is not a solution, as we tend to lazily create subdirectories of .git/, and having rerere.enabled configuration set is a strong indication that the user _wants_ to have this lazy creation to happen; - We could always create .git/rr-cache upon repository creation. This is tempting but will not help people with existing repositories. - Detect this case by seeing that mkdir(2) failed with EEXIST, checking that the path is a symlink, and try running mkdir(2) on the link target. This patch solves the issue by doing the third one. Strictly speaking, this is incomplete. It does not attempt to handle relative symbolic link that points into the original repository, but this is good enough to help people who use contrib/workdir/git-new-workdir script. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-11 01:02:50 +01:00
int mkdir_in_gitdir(const char *path)
{
if (mkdir(path, 0777)) {
int saved_errno = errno;
struct stat st;
struct strbuf sb = STRBUF_INIT;
if (errno != EEXIST)
return -1;
/*
* Are we looking at a path in a symlinked worktree
* whose original repository does not yet have it?
* e.g. .git/rr-cache pointing at its original
* repository in which the user hasn't performed any
* conflict resolution yet?
*/
if (lstat(path, &st) || !S_ISLNK(st.st_mode) ||
strbuf_readlink(&sb, path, st.st_size) ||
!is_absolute_path(sb.buf) ||
mkdir(sb.buf, 0777)) {
strbuf_release(&sb);
errno = saved_errno;
return -1;
}
strbuf_release(&sb);
}
return adjust_shared_perm(path);
}
static enum scld_error safe_create_leading_directories_1(char *path, int share)
{
char *next_component = path + offset_1st_component(path);
enum scld_error ret = SCLD_OK;
while (ret == SCLD_OK && next_component) {
struct stat st;
char *slash = next_component, slash_character;
while (*slash && !is_dir_sep(*slash))
slash++;
if (!*slash)
break;
next_component = slash + 1;
while (is_dir_sep(*next_component))
next_component++;
if (!*next_component)
break;
slash_character = *slash;
*slash = '\0';
if (!stat(path, &st)) {
/* path exists */
if (!S_ISDIR(st.st_mode)) {
errno = ENOTDIR;
ret = SCLD_EXISTS;
}
} else if (mkdir(path, 0777)) {
if (errno == EEXIST &&
!stat(path, &st) && S_ISDIR(st.st_mode))
; /* somebody created it since we checked */
else if (errno == ENOENT)
/*
* Either mkdir() failed because
* somebody just pruned the containing
* directory, or stat() failed because
* the file that was in our way was
* just removed. Either way, inform
* the caller that it might be worth
* trying again:
*/
ret = SCLD_VANISHED;
else
ret = SCLD_FAILED;
} else if (share && adjust_shared_perm(path)) {
ret = SCLD_PERMS;
}
*slash = slash_character;
}
return ret;
}
enum scld_error safe_create_leading_directories(char *path)
{
return safe_create_leading_directories_1(path, 1);
}
enum scld_error safe_create_leading_directories_no_share(char *path)
{
return safe_create_leading_directories_1(path, 0);
}
enum scld_error safe_create_leading_directories_const(const char *path)
{
int save_errno;
/* path points to cache entries, so xstrdup before messing with it */
char *buf = xstrdup(path);
enum scld_error result = safe_create_leading_directories(buf);
save_errno = errno;
free(buf);
errno = save_errno;
return result;
}
static void fill_loose_path(struct strbuf *buf, const struct object_id *oid)
{
int i;
for (i = 0; i < the_hash_algo->rawsz; i++) {
static char hex[] = "0123456789abcdef";
unsigned int val = oid->hash[i];
strbuf_addch(buf, hex[val >> 4]);
strbuf_addch(buf, hex[val & 0xf]);
if (!i)
strbuf_addch(buf, '/');
}
}
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
static const char *odb_loose_path(struct object_directory *odb,
struct strbuf *buf,
const struct object_id *oid)
{
strbuf_reset(buf);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
strbuf_addstr(buf, odb->path);
strbuf_addch(buf, '/');
fill_loose_path(buf, oid);
return buf->buf;
}
const char *loose_object_path(struct repository *r, struct strbuf *buf,
const struct object_id *oid)
{
return odb_loose_path(r->objects->odb, buf, oid);
}
/*
* Return non-zero iff the path is usable as an alternate object database.
*/
static int alt_odb_usable(struct raw_object_store *o,
struct strbuf *path,
const char *normalized_objdir, khiter_t *pos)
{
int r;
/* Detect cases where alternate disappeared */
if (!is_directory(path->buf)) {
error(_("object directory %s does not exist; "
"check .git/objects/info/alternates"),
path->buf);
return 0;
}
/*
* Prevent the common mistake of listing the same
* thing twice, or object directory itself.
*/
if (!o->odb_by_path) {
khiter_t p;
o->odb_by_path = kh_init_odb_path_map();
assert(!o->odb->next);
p = kh_put_odb_path_map(o->odb_by_path, o->odb->path, &r);
assert(r == 1); /* never used */
kh_value(o->odb_by_path, p) = o->odb;
}
if (fspatheq(path->buf, normalized_objdir))
return 0;
*pos = kh_put_odb_path_map(o->odb_by_path, path->buf, &r);
/* r: 0 = exists, 1 = never used, 2 = deleted */
return r == 0 ? 0 : 1;
}
/*
* Prepare alternate object database registry.
*
* The variable alt_odb_list points at the list of struct
* object_directory. The elements on this list come from
* non-empty elements from colon separated ALTERNATE_DB_ENVIRONMENT
* environment variable, and $GIT_OBJECT_DIRECTORY/info/alternates,
* whose contents is similar to that environment variable but can be
* LF separated. Its base points at a statically allocated buffer that
* contains "/the/directory/corresponding/to/.git/objects/...", while
* its name points just after the slash at the end of ".git/objects/"
* in the example above, and has enough space to hold all hex characters
* of the object ID, an extra slash for the first level indirection, and
* the terminating NUL.
*/
static void read_info_alternates(struct repository *r,
const char *relative_base,
int depth);
static int link_alt_odb_entry(struct repository *r, const struct strbuf *entry,
2018-03-23 18:21:04 +01:00
const char *relative_base, int depth, const char *normalized_objdir)
{
struct object_directory *ent;
struct strbuf pathbuf = STRBUF_INIT;
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
struct strbuf tmp = STRBUF_INIT;
khiter_t pos;
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
int ret = -1;
if (!is_absolute_path(entry->buf) && relative_base) {
strbuf_realpath(&pathbuf, relative_base, 1);
strbuf_addch(&pathbuf, '/');
}
strbuf_addbuf(&pathbuf, entry);
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
if (!strbuf_realpath(&tmp, pathbuf.buf, 0)) {
error(_("unable to normalize alternate object path: %s"),
link_alt_odb_entry: handle normalize_path errors When we add a new alternate to the list, we try to normalize out any redundant "..", etc. However, we do not look at the return value of normalize_path_copy(), and will happily continue with a path that could not be normalized. Worse, the normalizing process is done in-place, so we are left with whatever half-finished working state the normalizing function was in. Fortunately, this cannot cause us to read past the end of our buffer, as that working state will always leave the NUL from the original path in place. And we do tend to notice problems when we check is_directory() on the path. But you can see the nonsense that we feed to is_directory with an entry like: this/../../is/../../way/../../too/../../deep/../../to/../../resolve in your objects/info/alternates, which yields: error: object directory /to/e/deep/too/way//ects/this/../../is/../../way/../../too/../../deep/../../to/../../resolve does not exist; check .git/objects/info/alternates. We can easily fix this just by checking the return value. But that makes it hard to generate a good error message, since we're normalizing in-place and our input value has been overwritten by cruft. Instead, let's provide a strbuf helper that does an in-place normalize, but restores the original contents on error. This uses a second buffer under the hood, which is slightly less efficient, but this is not a performance-critical code path. The strbuf helper can also properly set the "len" parameter of the strbuf before returning. Just doing: normalize_path_copy(buf.buf, buf.buf); will shorten the string, but leave buf.len at the original length. That may be confusing to later code which uses the strbuf. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-03 22:34:17 +02:00
pathbuf.buf);
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
goto error;
link_alt_odb_entry: handle normalize_path errors When we add a new alternate to the list, we try to normalize out any redundant "..", etc. However, we do not look at the return value of normalize_path_copy(), and will happily continue with a path that could not be normalized. Worse, the normalizing process is done in-place, so we are left with whatever half-finished working state the normalizing function was in. Fortunately, this cannot cause us to read past the end of our buffer, as that working state will always leave the NUL from the original path in place. And we do tend to notice problems when we check is_directory() on the path. But you can see the nonsense that we feed to is_directory with an entry like: this/../../is/../../way/../../too/../../deep/../../to/../../resolve in your objects/info/alternates, which yields: error: object directory /to/e/deep/too/way//ects/this/../../is/../../way/../../too/../../deep/../../to/../../resolve does not exist; check .git/objects/info/alternates. We can easily fix this just by checking the return value. But that makes it hard to generate a good error message, since we're normalizing in-place and our input value has been overwritten by cruft. Instead, let's provide a strbuf helper that does an in-place normalize, but restores the original contents on error. This uses a second buffer under the hood, which is slightly less efficient, but this is not a performance-critical code path. The strbuf helper can also properly set the "len" parameter of the strbuf before returning. Just doing: normalize_path_copy(buf.buf, buf.buf); will shorten the string, but leave buf.len at the original length. That may be confusing to later code which uses the strbuf. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-03 22:34:17 +02:00
}
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
strbuf_swap(&pathbuf, &tmp);
/*
* The trailing slash after the directory name is given by
* this function at the end. Remove duplicates.
*/
while (pathbuf.len && pathbuf.buf[pathbuf.len - 1] == '/')
strbuf_setlen(&pathbuf, pathbuf.len - 1);
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
if (!alt_odb_usable(r->objects, &pathbuf, normalized_objdir, &pos))
goto error;
CALLOC_ARRAY(ent, 1);
/* pathbuf.buf is already in r->objects->odb_by_path */
ent->path = strbuf_detach(&pathbuf, NULL);
/* add the alternate entry */
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
*r->objects->odb_tail = ent;
r->objects->odb_tail = &(ent->next);
ent->next = NULL;
assert(r->objects->odb_by_path);
kh_value(r->objects->odb_by_path, pos) = ent;
/* recursively add alternates */
read_info_alternates(r, ent->path, depth + 1);
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
ret = 0;
error:
strbuf_release(&tmp);
strbuf_release(&pathbuf);
return ret;
}
alternates: accept double-quoted paths We read lists of alternates from objects/info/alternates files (delimited by newline), as well as from the GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable (delimited by colon or semi-colon, depending on the platform). There's no mechanism for quoting the delimiters, so it's impossible to specify an alternate path that contains a colon in the environment, or one that contains a newline in a file. We've lived with that restriction for ages because both alternates and filenames with colons are relatively rare, and it's only a problem when the two meet. But since 722ff7f87 (receive-pack: quarantine objects until pre-receive accepts, 2016-10-03), which builds on the alternates system, every push causes the receiver to set GIT_ALTERNATE_OBJECT_DIRECTORIES internally. It would be convenient to have some way to quote the delimiter so that we can represent arbitrary paths. The simplest thing would be an escape character before a quoted delimiter (e.g., "\:" as a literal colon). But that creates a backwards compatibility problem: any path which uses that escape character is now broken, and we've just shifted the problem. We could choose an unlikely escape character (e.g., something from the non-printable ASCII range), but that's awkward to use. Instead, let's treat names as unquoted unless they begin with a double-quote, in which case they are interpreted via our usual C-stylke quoting rules. This also breaks backwards-compatibility, but in a smaller way: it only matters if your file has a double-quote as the very _first_ character in the path (whereas an escape character is a problem anywhere in the path). It's also consistent with many other parts of git, which accept either a bare pathname or a double-quoted one, and the sender can choose to quote or not as required. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-12 20:52:22 +01:00
static const char *parse_alt_odb_entry(const char *string,
int sep,
struct strbuf *out)
{
const char *end;
strbuf_reset(out);
if (*string == '#') {
/* comment; consume up to next separator */
end = strchrnul(string, sep);
} else if (*string == '"' && !unquote_c_style(out, string, &end)) {
/*
* quoted path; unquote_c_style has copied the
* data for us and set "end". Broken quoting (e.g.,
* an entry that doesn't end with a quote) falls
* back to the unquoted case below.
*/
} else {
/* normal, unquoted path */
end = strchrnul(string, sep);
strbuf_add(out, string, end - string);
}
if (*end)
end++;
return end;
}
static void link_alt_odb_entries(struct repository *r, const char *alt,
int sep, const char *relative_base, int depth)
{
struct strbuf objdirbuf = STRBUF_INIT;
alternates: accept double-quoted paths We read lists of alternates from objects/info/alternates files (delimited by newline), as well as from the GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable (delimited by colon or semi-colon, depending on the platform). There's no mechanism for quoting the delimiters, so it's impossible to specify an alternate path that contains a colon in the environment, or one that contains a newline in a file. We've lived with that restriction for ages because both alternates and filenames with colons are relatively rare, and it's only a problem when the two meet. But since 722ff7f87 (receive-pack: quarantine objects until pre-receive accepts, 2016-10-03), which builds on the alternates system, every push causes the receiver to set GIT_ALTERNATE_OBJECT_DIRECTORIES internally. It would be convenient to have some way to quote the delimiter so that we can represent arbitrary paths. The simplest thing would be an escape character before a quoted delimiter (e.g., "\:" as a literal colon). But that creates a backwards compatibility problem: any path which uses that escape character is now broken, and we've just shifted the problem. We could choose an unlikely escape character (e.g., something from the non-printable ASCII range), but that's awkward to use. Instead, let's treat names as unquoted unless they begin with a double-quote, in which case they are interpreted via our usual C-stylke quoting rules. This also breaks backwards-compatibility, but in a smaller way: it only matters if your file has a double-quote as the very _first_ character in the path (whereas an escape character is a problem anywhere in the path). It's also consistent with many other parts of git, which accept either a bare pathname or a double-quoted one, and the sender can choose to quote or not as required. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-12 20:52:22 +01:00
struct strbuf entry = STRBUF_INIT;
if (!alt || !*alt)
return;
if (depth > 5) {
error(_("%s: ignoring alternate object stores, nesting too deep"),
relative_base);
return;
}
object-file: use real paths when adding alternates When adding an alternate ODB, we check if the alternate has the same path as the object dir, and if so, we do nothing. However, that comparison does not resolve symlinks. This makes it possible to add the object dir as an alternate, which may result in bad behavior. For example, it can trick "git repack -a -l -d" (possibly run by "git gc") into thinking that all packs come from an alternate and delete all objects. rm -rf test && git clone https://github.com/git/git test && ( cd test && ln -s objects .git/alt-objects && # -c repack.updateserverinfo=false silences a warning about not # being able to update "info/refs", it isn't needed to show the # bad behavior GIT_ALTERNATE_OBJECT_DIRECTORIES=".git/alt-objects" git \ -c repack.updateserverinfo=false repack -a -l -d && # It's broken! git status # Because there are no more objects! ls .git/objects/pack ) Fix this by resolving symlinks and relative paths before comparing the alternate and object dir. This lets us clean up a number of issues noted in 37a95862c6 (alternates: re-allow relative paths from environment, 2016-11-07): - Now that we compare the real paths, duplicate detection is no longer foiled by relative paths. - Using strbuf_realpath() allows us to "normalize" paths that strbuf_normalize_path() can't, so we can stop silently ignoring errors when "normalizing" paths from the environment. - We now store an absolute path based on getcwd() (the "future direction" named in 37a95862c6), so chdir()-ing in the process no longer changes the directory pointed to by the alternate. This is a change in behavior, but a desirable one. Signed-off-by: Glen Choo <chooglen@google.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-11-24 01:55:31 +01:00
strbuf_realpath(&objdirbuf, r->objects->odb->path, 1);
alternates: accept double-quoted paths We read lists of alternates from objects/info/alternates files (delimited by newline), as well as from the GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable (delimited by colon or semi-colon, depending on the platform). There's no mechanism for quoting the delimiters, so it's impossible to specify an alternate path that contains a colon in the environment, or one that contains a newline in a file. We've lived with that restriction for ages because both alternates and filenames with colons are relatively rare, and it's only a problem when the two meet. But since 722ff7f87 (receive-pack: quarantine objects until pre-receive accepts, 2016-10-03), which builds on the alternates system, every push causes the receiver to set GIT_ALTERNATE_OBJECT_DIRECTORIES internally. It would be convenient to have some way to quote the delimiter so that we can represent arbitrary paths. The simplest thing would be an escape character before a quoted delimiter (e.g., "\:" as a literal colon). But that creates a backwards compatibility problem: any path which uses that escape character is now broken, and we've just shifted the problem. We could choose an unlikely escape character (e.g., something from the non-printable ASCII range), but that's awkward to use. Instead, let's treat names as unquoted unless they begin with a double-quote, in which case they are interpreted via our usual C-stylke quoting rules. This also breaks backwards-compatibility, but in a smaller way: it only matters if your file has a double-quote as the very _first_ character in the path (whereas an escape character is a problem anywhere in the path). It's also consistent with many other parts of git, which accept either a bare pathname or a double-quoted one, and the sender can choose to quote or not as required. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-12 20:52:22 +01:00
while (*alt) {
alt = parse_alt_odb_entry(alt, sep, &entry);
if (!entry.len)
continue;
link_alt_odb_entry(r, &entry,
2018-03-23 18:21:04 +01:00
relative_base, depth, objdirbuf.buf);
}
alternates: accept double-quoted paths We read lists of alternates from objects/info/alternates files (delimited by newline), as well as from the GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable (delimited by colon or semi-colon, depending on the platform). There's no mechanism for quoting the delimiters, so it's impossible to specify an alternate path that contains a colon in the environment, or one that contains a newline in a file. We've lived with that restriction for ages because both alternates and filenames with colons are relatively rare, and it's only a problem when the two meet. But since 722ff7f87 (receive-pack: quarantine objects until pre-receive accepts, 2016-10-03), which builds on the alternates system, every push causes the receiver to set GIT_ALTERNATE_OBJECT_DIRECTORIES internally. It would be convenient to have some way to quote the delimiter so that we can represent arbitrary paths. The simplest thing would be an escape character before a quoted delimiter (e.g., "\:" as a literal colon). But that creates a backwards compatibility problem: any path which uses that escape character is now broken, and we've just shifted the problem. We could choose an unlikely escape character (e.g., something from the non-printable ASCII range), but that's awkward to use. Instead, let's treat names as unquoted unless they begin with a double-quote, in which case they are interpreted via our usual C-stylke quoting rules. This also breaks backwards-compatibility, but in a smaller way: it only matters if your file has a double-quote as the very _first_ character in the path (whereas an escape character is a problem anywhere in the path). It's also consistent with many other parts of git, which accept either a bare pathname or a double-quoted one, and the sender can choose to quote or not as required. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-12-12 20:52:22 +01:00
strbuf_release(&entry);
strbuf_release(&objdirbuf);
}
static void read_info_alternates(struct repository *r,
const char *relative_base,
int depth)
{
char *path;
read_info_alternates: read contents into strbuf This patch fixes a regression in v2.11.1 where we might read past the end of an mmap'd buffer. It was introduced in cf3c635210. The link_alt_odb_entries() function has always taken a ptr/len pair as input. Until cf3c635210 (alternates: accept double-quoted paths, 2016-12-12), we made a copy of those bytes in a string. But after that commit, we switched to parsing the input left-to-right, and we ignore "len" totally, instead reading until we hit a NUL. This has mostly gone unnoticed for a few reasons: 1. All but one caller passes a NUL-terminated string, with "len" pointing to the NUL. 2. The remaining caller, read_info_alternates(), passes in an mmap'd file. Unless the file is an exact multiple of the page size, it will generally be followed by NUL padding to the end of the page, which just works. The easiest way to demonstrate the problem is to build with: make SANITIZE=address NO_MMAP=Nope test Any test which involves $GIT_DIR/info/alternates will fail, as the mmap emulation (correctly) does not add an extra NUL, and ASAN complains about reading past the end of the buffer. One solution would be to teach link_alt_odb_entries() to respect "len". But it's actually a bit tricky, since we depend on unquote_c_style() under the hood, and it has no ptr/len variant. We could also just make a NUL-terminated copy of the input bytes and operate on that. But since all but one caller already is passing a string, instead let's just fix that caller to provide NUL-terminated input in the first place, by swapping out mmap for strbuf_read_file(). There's no advantage to using mmap on the alternates file. It's not expected to be large (and anyway, we're copying its contents into an in-memory linked list). Nor is using git_open() buying us anything here, since we don't keep the descriptor open for a long period of time. Let's also drop the "len" parameter entirely from link_alt_odb_entries(), since it's completely ignored. That will avoid any new callers re-introducing a similar bug. Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-19 21:41:07 +02:00
struct strbuf buf = STRBUF_INIT;
path = xstrfmt("%s/info/alternates", relative_base);
read_info_alternates: read contents into strbuf This patch fixes a regression in v2.11.1 where we might read past the end of an mmap'd buffer. It was introduced in cf3c635210. The link_alt_odb_entries() function has always taken a ptr/len pair as input. Until cf3c635210 (alternates: accept double-quoted paths, 2016-12-12), we made a copy of those bytes in a string. But after that commit, we switched to parsing the input left-to-right, and we ignore "len" totally, instead reading until we hit a NUL. This has mostly gone unnoticed for a few reasons: 1. All but one caller passes a NUL-terminated string, with "len" pointing to the NUL. 2. The remaining caller, read_info_alternates(), passes in an mmap'd file. Unless the file is an exact multiple of the page size, it will generally be followed by NUL padding to the end of the page, which just works. The easiest way to demonstrate the problem is to build with: make SANITIZE=address NO_MMAP=Nope test Any test which involves $GIT_DIR/info/alternates will fail, as the mmap emulation (correctly) does not add an extra NUL, and ASAN complains about reading past the end of the buffer. One solution would be to teach link_alt_odb_entries() to respect "len". But it's actually a bit tricky, since we depend on unquote_c_style() under the hood, and it has no ptr/len variant. We could also just make a NUL-terminated copy of the input bytes and operate on that. But since all but one caller already is passing a string, instead let's just fix that caller to provide NUL-terminated input in the first place, by swapping out mmap for strbuf_read_file(). There's no advantage to using mmap on the alternates file. It's not expected to be large (and anyway, we're copying its contents into an in-memory linked list). Nor is using git_open() buying us anything here, since we don't keep the descriptor open for a long period of time. Let's also drop the "len" parameter entirely from link_alt_odb_entries(), since it's completely ignored. That will avoid any new callers re-introducing a similar bug. Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-19 21:41:07 +02:00
if (strbuf_read_file(&buf, path, 1024) < 0) {
warn_on_fopen_errors(path);
read_info_alternates: read contents into strbuf This patch fixes a regression in v2.11.1 where we might read past the end of an mmap'd buffer. It was introduced in cf3c635210. The link_alt_odb_entries() function has always taken a ptr/len pair as input. Until cf3c635210 (alternates: accept double-quoted paths, 2016-12-12), we made a copy of those bytes in a string. But after that commit, we switched to parsing the input left-to-right, and we ignore "len" totally, instead reading until we hit a NUL. This has mostly gone unnoticed for a few reasons: 1. All but one caller passes a NUL-terminated string, with "len" pointing to the NUL. 2. The remaining caller, read_info_alternates(), passes in an mmap'd file. Unless the file is an exact multiple of the page size, it will generally be followed by NUL padding to the end of the page, which just works. The easiest way to demonstrate the problem is to build with: make SANITIZE=address NO_MMAP=Nope test Any test which involves $GIT_DIR/info/alternates will fail, as the mmap emulation (correctly) does not add an extra NUL, and ASAN complains about reading past the end of the buffer. One solution would be to teach link_alt_odb_entries() to respect "len". But it's actually a bit tricky, since we depend on unquote_c_style() under the hood, and it has no ptr/len variant. We could also just make a NUL-terminated copy of the input bytes and operate on that. But since all but one caller already is passing a string, instead let's just fix that caller to provide NUL-terminated input in the first place, by swapping out mmap for strbuf_read_file(). There's no advantage to using mmap on the alternates file. It's not expected to be large (and anyway, we're copying its contents into an in-memory linked list). Nor is using git_open() buying us anything here, since we don't keep the descriptor open for a long period of time. Let's also drop the "len" parameter entirely from link_alt_odb_entries(), since it's completely ignored. That will avoid any new callers re-introducing a similar bug. Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-19 21:41:07 +02:00
free(path);
return;
}
link_alt_odb_entries(r, buf.buf, '\n', relative_base, depth);
read_info_alternates: read contents into strbuf This patch fixes a regression in v2.11.1 where we might read past the end of an mmap'd buffer. It was introduced in cf3c635210. The link_alt_odb_entries() function has always taken a ptr/len pair as input. Until cf3c635210 (alternates: accept double-quoted paths, 2016-12-12), we made a copy of those bytes in a string. But after that commit, we switched to parsing the input left-to-right, and we ignore "len" totally, instead reading until we hit a NUL. This has mostly gone unnoticed for a few reasons: 1. All but one caller passes a NUL-terminated string, with "len" pointing to the NUL. 2. The remaining caller, read_info_alternates(), passes in an mmap'd file. Unless the file is an exact multiple of the page size, it will generally be followed by NUL padding to the end of the page, which just works. The easiest way to demonstrate the problem is to build with: make SANITIZE=address NO_MMAP=Nope test Any test which involves $GIT_DIR/info/alternates will fail, as the mmap emulation (correctly) does not add an extra NUL, and ASAN complains about reading past the end of the buffer. One solution would be to teach link_alt_odb_entries() to respect "len". But it's actually a bit tricky, since we depend on unquote_c_style() under the hood, and it has no ptr/len variant. We could also just make a NUL-terminated copy of the input bytes and operate on that. But since all but one caller already is passing a string, instead let's just fix that caller to provide NUL-terminated input in the first place, by swapping out mmap for strbuf_read_file(). There's no advantage to using mmap on the alternates file. It's not expected to be large (and anyway, we're copying its contents into an in-memory linked list). Nor is using git_open() buying us anything here, since we don't keep the descriptor open for a long period of time. Let's also drop the "len" parameter entirely from link_alt_odb_entries(), since it's completely ignored. That will avoid any new callers re-introducing a similar bug. Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-19 21:41:07 +02:00
strbuf_release(&buf);
free(path);
}
void add_to_alternates_file(const char *reference)
{
struct lock_file lock = LOCK_INIT;
char *alts = git_pathdup("objects/info/alternates");
FILE *in, *out;
int found = 0;
hold_lock_file_for_update(&lock, alts, LOCK_DIE_ON_ERROR);
out = fdopen_lock_file(&lock, "w");
if (!out)
die_errno(_("unable to fdopen alternates lockfile"));
in = fopen(alts, "r");
if (in) {
struct strbuf line = STRBUF_INIT;
while (strbuf_getline(&line, in) != EOF) {
if (!strcmp(reference, line.buf)) {
found = 1;
break;
}
fprintf_or_die(out, "%s\n", line.buf);
}
strbuf_release(&line);
fclose(in);
}
else if (errno != ENOENT)
die_errno(_("unable to read alternates file"));
if (found) {
rollback_lock_file(&lock);
} else {
fprintf_or_die(out, "%s\n", reference);
if (commit_lock_file(&lock))
die_errno(_("unable to move new alternates file into place"));
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
if (the_repository->objects->loaded_alternates)
link_alt_odb_entries(the_repository, reference,
'\n', NULL, 0);
}
free(alts);
}
void add_to_alternates_memory(const char *reference)
{
/*
* Make sure alternates are initialized, or else our entry may be
* overwritten when they are.
*/
prepare_alt_odb(the_repository);
link_alt_odb_entries(the_repository, reference,
'\n', NULL, 0);
}
struct object_directory *set_temporary_primary_odb(const char *dir, int will_destroy)
{
struct object_directory *new_odb;
/*
* Make sure alternates are initialized, or else our entry may be
* overwritten when they are.
*/
prepare_alt_odb(the_repository);
/*
* Make a new primary odb and link the old primary ODB in as an
* alternate
*/
new_odb = xcalloc(1, sizeof(*new_odb));
new_odb->path = xstrdup(dir);
/*
* Disable ref updates while a temporary odb is active, since
* the objects in the database may roll back.
*/
new_odb->disable_ref_updates = 1;
new_odb->will_destroy = will_destroy;
new_odb->next = the_repository->objects->odb;
the_repository->objects->odb = new_odb;
return new_odb->next;
}
void restore_primary_odb(struct object_directory *restore_odb, const char *old_path)
{
struct object_directory *cur_odb = the_repository->objects->odb;
if (strcmp(old_path, cur_odb->path))
BUG("expected %s as primary object store; found %s",
old_path, cur_odb->path);
if (cur_odb->next != restore_odb)
BUG("we expect the old primary object store to be the first alternate");
the_repository->objects->odb = restore_odb;
free_object_directory(cur_odb);
}
/*
* Compute the exact path an alternate is at and returns it. In case of
* error NULL is returned and the human readable error is added to `err`
* `path` may be relative and should point to $GIT_DIR.
* `err` must not be null.
*/
char *compute_alternate_path(const char *path, struct strbuf *err)
{
char *ref_git = NULL;
const char *repo;
int seen_error = 0;
ref_git = real_pathdup(path, 0);
if (!ref_git) {
seen_error = 1;
strbuf_addf(err, _("path '%s' does not exist"), path);
goto out;
}
repo = read_gitfile(ref_git);
if (!repo)
repo = read_gitfile(mkpath("%s/.git", ref_git));
if (repo) {
free(ref_git);
ref_git = xstrdup(repo);
}
if (!repo && is_directory(mkpath("%s/.git/objects", ref_git))) {
char *ref_git_git = mkpathdup("%s/.git", ref_git);
free(ref_git);
ref_git = ref_git_git;
} else if (!is_directory(mkpath("%s/objects", ref_git))) {
struct strbuf sb = STRBUF_INIT;
seen_error = 1;
if (get_common_dir(&sb, ref_git)) {
strbuf_addf(err,
_("reference repository '%s' as a linked "
"checkout is not supported yet."),
path);
goto out;
}
strbuf_addf(err, _("reference repository '%s' is not a "
"local repository."), path);
goto out;
}
if (!access(mkpath("%s/shallow", ref_git), F_OK)) {
strbuf_addf(err, _("reference repository '%s' is shallow"),
path);
seen_error = 1;
goto out;
}
if (!access(mkpath("%s/info/grafts", ref_git), F_OK)) {
strbuf_addf(err,
_("reference repository '%s' is grafted"),
path);
seen_error = 1;
goto out;
}
out:
if (seen_error) {
FREE_AND_NULL(ref_git);
}
return ref_git;
}
midx: avoid opening multiple MIDXs when writing Opening multiple instance of the same MIDX can lead to problems like two separate packed_git structures which represent the same pack being added to the repository's object store. The above scenario can happen because prepare_midx_pack() checks if `m->packs[pack_int_id]` is NULL in order to determine if a pack has been opened and installed in the repository before. But a caller can construct two copies of the same MIDX by calling get_multi_pack_index() and load_multi_pack_index() since the former manipulates the object store directly but the latter is a lower-level routine which allocates a new MIDX for each call. So if prepare_midx_pack() is called on multiple MIDXs with the same pack_int_id, then that pack will be installed twice in the object store's packed_git pointer. This can lead to problems in, for e.g., the pack-bitmap code, which does something like the following (in pack-bitmap.c:open_pack_bitmap()): struct bitmap_index *bitmap_git = ...; for (p = get_all_packs(r); p; p = p->next) { if (open_pack_bitmap_1(bitmap_git, p) == 0) ret = 0; } which is a problem if two copies of the same pack exist in the packed_git list because pack-bitmap.c:open_pack_bitmap_1() contains a conditional like the following: if (bitmap_git->pack || bitmap_git->midx) { /* ignore extra bitmap file; we can only handle one */ warning("ignoring extra bitmap file: %s", packfile->pack_name); close(fd); return -1; } Avoid this scenario by not letting write_midx_internal() open a MIDX that isn't also pointed at by the object store. So long as this is the case, other routines should prefer to open MIDXs with get_multi_pack_index() or reprepare_packed_git() instead of creating instances on their own. Because get_multi_pack_index() returns `r->object_store->multi_pack_index` if it is non-NULL, we'll only have one instance of a MIDX open at one time, avoiding these problems. To encourage this, drop the `struct multi_pack_index *` parameter from `write_midx_internal()`, and rely instead on the `object_dir` to find (or initialize) the correct MIDX instance. Likewise, replace the call to `close_midx()` with `close_object_store()`, since we're about to replace the MIDX with a new one and should invalidate the object store's memory of any MIDX that might have existed beforehand. Note that this now forbids passing object directories that don't belong to alternate repositories over `--object-dir`, since before we would have happily opened a MIDX in any directory, but now restrict ourselves to only those reachable by `r->objects->multi_pack_index` (and alternate MIDXs that we can see by walking the `next` pointer). As far as I can tell, supporting arbitrary directories with `--object-dir` was a historical accident, since even the documentation says `<alt>` when referring to the value passed to this option. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 22:34:01 +02:00
struct object_directory *find_odb(struct repository *r, const char *obj_dir)
{
struct object_directory *odb;
char *obj_dir_real = real_pathdup(obj_dir, 1);
struct strbuf odb_path_real = STRBUF_INIT;
prepare_alt_odb(r);
for (odb = r->objects->odb; odb; odb = odb->next) {
strbuf_realpath(&odb_path_real, odb->path, 1);
if (!strcmp(obj_dir_real, odb_path_real.buf))
break;
}
free(obj_dir_real);
strbuf_release(&odb_path_real);
if (!odb)
die(_("could not find object directory matching %s"), obj_dir);
return odb;
}
static void fill_alternate_refs_command(struct child_process *cmd,
const char *repo_path)
{
const char *value;
if (!git_config_get_value("core.alternateRefsCommand", &value)) {
cmd->use_shell = 1;
strvec_push(&cmd->args, value);
strvec_push(&cmd->args, repo_path);
} else {
cmd->git_cmd = 1;
strvec_pushf(&cmd->args, "--git-dir=%s", repo_path);
strvec_push(&cmd->args, "for-each-ref");
strvec_push(&cmd->args, "--format=%(objectname)");
if (!git_config_get_value("core.alternateRefsPrefixes", &value)) {
strvec_push(&cmd->args, "--");
strvec_split(&cmd->args, value);
}
}
strvec_pushv(&cmd->env, (const char **)local_repo_env);
cmd->out = -1;
}
static void read_alternate_refs(const char *path,
alternate_ref_fn *cb,
void *data)
{
struct child_process cmd = CHILD_PROCESS_INIT;
struct strbuf line = STRBUF_INIT;
FILE *fh;
fill_alternate_refs_command(&cmd, path);
if (start_command(&cmd))
return;
fh = xfdopen(cmd.out, "r");
while (strbuf_getline_lf(&line, fh) != EOF) {
struct object_id oid;
const char *p;
if (parse_oid_hex(line.buf, &oid, &p) || *p) {
warning(_("invalid line while parsing alternate refs: %s"),
line.buf);
break;
}
cb(&oid, data);
}
fclose(fh);
finish_command(&cmd);
strbuf_release(&line);
}
struct alternate_refs_data {
alternate_ref_fn *fn;
void *data;
};
static int refs_from_alternate_cb(struct object_directory *e,
void *data)
{
struct strbuf path = STRBUF_INIT;
size_t base_len;
struct alternate_refs_data *cb = data;
if (!strbuf_realpath(&path, e->path, 0))
goto out;
if (!strbuf_strip_suffix(&path, "/objects"))
goto out;
base_len = path.len;
/* Is this a git repository with refs? */
strbuf_addstr(&path, "/refs");
if (!is_directory(path.buf))
goto out;
strbuf_setlen(&path, base_len);
read_alternate_refs(path.buf, cb->fn, cb->data);
out:
strbuf_release(&path);
return 0;
}
void for_each_alternate_ref(alternate_ref_fn fn, void *data)
{
struct alternate_refs_data cb;
cb.fn = fn;
cb.data = data;
foreach_alt_odb(refs_from_alternate_cb, &cb);
}
int foreach_alt_odb(alt_odb_fn fn, void *cb)
{
struct object_directory *ent;
int r = 0;
prepare_alt_odb(the_repository);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
for (ent = the_repository->objects->odb->next; ent; ent = ent->next) {
r = fn(ent, cb);
if (r)
break;
}
return r;
}
void prepare_alt_odb(struct repository *r)
{
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
if (r->objects->loaded_alternates)
return;
link_alt_odb_entries(r, r->objects->alternate_db, PATH_SEP, NULL, 0);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
read_info_alternates(r, r->objects->odb->path, 0);
r->objects->loaded_alternates = 1;
}
/* Returns 1 if we have successfully freshened the file, 0 otherwise. */
static int freshen_file(const char *fn)
{
return !utime(fn, NULL);
}
/*
* All of the check_and_freshen functions return 1 if the file exists and was
* freshened (if freshening was requested), 0 otherwise. If they return
* 0, you should not assume that it is safe to skip a write of the object (it
* either does not exist on disk, or has a stale mtime and may be subject to
* pruning).
*/
int check_and_freshen_file(const char *fn, int freshen)
{
if (access(fn, F_OK))
return 0;
if (freshen && !freshen_file(fn))
return 0;
return 1;
}
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
static int check_and_freshen_odb(struct object_directory *odb,
const struct object_id *oid,
int freshen)
{
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
static struct strbuf path = STRBUF_INIT;
odb_loose_path(odb, &path, oid);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
return check_and_freshen_file(path.buf, freshen);
}
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
static int check_and_freshen_local(const struct object_id *oid, int freshen)
{
return check_and_freshen_odb(the_repository->objects->odb, oid, freshen);
}
static int check_and_freshen_nonlocal(const struct object_id *oid, int freshen)
{
struct object_directory *odb;
prepare_alt_odb(the_repository);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
for (odb = the_repository->objects->odb->next; odb; odb = odb->next) {
if (check_and_freshen_odb(odb, oid, freshen))
return 1;
}
return 0;
}
static int check_and_freshen(const struct object_id *oid, int freshen)
{
return check_and_freshen_local(oid, freshen) ||
check_and_freshen_nonlocal(oid, freshen);
}
int has_loose_object_nonlocal(const struct object_id *oid)
{
return check_and_freshen_nonlocal(oid, 0);
}
builtin/pack-objects.c: --cruft without expiration Teach `pack-objects` how to generate a cruft pack when no objects are dropped (i.e., `--cruft-expiration=never`). Later patches will teach `pack-objects` how to generate a cruft pack that prunes objects. When generating a cruft pack which does not prune objects, we want to collect all unreachable objects into a single pack (noting and updating their mtimes as we accumulate them). Ordinary use will pass the result of a `git repack -A` as a kept pack, so when this patch says "kept pack", readers should think "reachable objects". Generating a non-expiring cruft packs works as follows: - Callers provide a list of every pack they know about, and indicate which packs are about to be removed. - All packs which are going to be removed (we'll call these the redundant ones) are marked as kept in-core. Any packs the caller did not mention (but are known to the `pack-objects` process) are also marked as kept in-core. Packs not mentioned by the caller are assumed to be unknown to them, i.e., they entered the repository after the caller decided which packs should be kept and which should be discarded. Since we do not want to include objects in these "unknown" packs (because we don't know which of their objects are or aren't reachable), these are also marked as kept in-core. - Then, we enumerate all objects in the repository, and add them to our packing list if they do not appear in an in-core kept pack. This results in a new cruft pack which contains all known objects that aren't included in the kept packs. When the kept pack is the result of `git repack -A`, the resulting pack contains all unreachable objects. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-05-21 01:17:52 +02:00
int has_loose_object(const struct object_id *oid)
{
return check_and_freshen(oid, 0);
}
static void mmap_limit_check(size_t length)
{
static size_t limit = 0;
if (!limit) {
limit = git_env_ulong("GIT_MMAP_LIMIT", 0);
if (!limit)
limit = SIZE_MAX;
}
if (length > limit)
die(_("attempting to mmap %"PRIuMAX" over limit %"PRIuMAX),
(uintmax_t)length, (uintmax_t)limit);
}
void *xmmap_gently(void *start, size_t length,
int prot, int flags, int fd, off_t offset)
{
void *ret;
mmap_limit_check(length);
ret = mmap(start, length, prot, flags, fd, offset);
packfile: drop release_pack_memory() Long ago, in 97bfeb34df (Release pack windows before reporting out of memory., 2006-12-24), we taught xmalloc() and friends to try unmapping pack windows when malloc() failed. It's unlikely that his helps a lot in practice, and it has some downsides. First, the downsides: 1. It makes xmalloc() not thread-safe. We've worked around this in pack-objects.c, which installs its own locking version of the try_to_free_routine(). But other threaded code doesn't. 2. It makes the system as a whole harder to reason about. Functions which allocate heap memory under the hood may have farther-reaching effects than expected. That might be worth the tradeoff if there's a benefit. But in practice, it seems unlikely. We're generally dealing with mmap'd files, so the OS is going to do a much better job at responding to memory pressure by dropping individual pages (the exception is systems with NO_MMAP, but even there the OS can probably respond just as well with swapping). So the only thing we're really freeing is address space. On 64-bit systems, we have plenty of that to go around. On 32-bit systems, it could possibly help. But around the same time we made two other changes: 77ccc5bbd1 (Introduce new config option for mmap limit., 2006-12-23) and 60bb8b1453 (Fully activate the sliding window pack access., 2006-12-23). Together that means that a 32-bit system should have no more than 256MB total of packed-git mmaps at one time, split between a few 32MB windows. It's unlikely we have any address space problems since then, but we don't have any data since the features were all added at the same time. Likewise, xmmap() will try to free memory. At first glance, it seems like we'd need this (when we try to mmap a new window, we might need to close an old one to save address space on a 32-bit system). But we're saved again by core.packedGitLimit: if we're going to exceed our 256MB limit, we'll close an existing window before we even call mmap(). So it seems unlikely that this feature is actually doing anything useful. And while we don't have reports of it harming anything (probably because it rarely if ever kicks in), it would be nice to simplify the system overall. This patch drops the whole try_to_free system from xmalloc(), as well as the manual pack memory release in xmmap(). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-08-12 22:50:21 +02:00
if (ret == MAP_FAILED && !length)
ret = NULL;
return ret;
}
const char *mmap_os_err(void)
{
static const char blank[] = "";
#if defined(__linux__)
if (errno == ENOMEM) {
/* this continues an existing error message: */
static const char enomem[] =
", check sys.vm.max_map_count and/or RLIMIT_DATA";
return enomem;
}
#endif /* OS-specific bits */
return blank;
}
void *xmmap(void *start, size_t length,
int prot, int flags, int fd, off_t offset)
{
void *ret = xmmap_gently(start, length, prot, flags, fd, offset);
if (ret == MAP_FAILED)
die_errno(_("mmap failed%s"), mmap_os_err());
return ret;
}
static int format_object_header_literally(char *str, size_t size,
const char *type, size_t objsize)
{
return xsnprintf(str, size, "%s %"PRIuMAX, type, (uintmax_t)objsize) + 1;
}
int format_object_header(char *str, size_t size, enum object_type type,
size_t objsize)
{
const char *name = type_name(type);
if (!name)
BUG("could not get a type name for 'enum object_type' value %d", type);
return format_object_header_literally(str, size, name, objsize);
}
int check_object_signature(struct repository *r, const struct object_id *oid,
void *buf, unsigned long size,
enum object_type type)
sha1_file: introduce close_one_pack() to close packs on fd pressure When the number of open packs exceeds pack_max_fds, unuse_one_window() is called repeatedly to attempt to release the least-recently-used pack windows, which, as a side-effect, will also close a pack file after closing its last open window. If a pack file has been opened, but no windows have been allocated into it, it will never be selected by unuse_one_window() and hence its file descriptor will not be closed. When this happens, git may exceed the number of file descriptors permitted by the system. This latter situation can occur in show-ref or receive-pack during ref advertisement. During ref advertisement, receive-pack will iterate over every ref in the repository and advertise it to the client after ensuring that the ref exists in the local repository. If the ref is located inside a pack, then the pack is opened to ensure that it exists, but since the object is not actually read from the pack, no mmap windows are allocated. When the number of open packs exceeds pack_max_fds, unuse_one_window() will not be able to find any windows to free and will not be able to close any packs. Once the per-process file descriptor limit is exceeded, receive-pack will produce a warning, not an error, for each pack it cannot open, and will then most likely fail with an error to spawn rev-list or index-pack like: error: cannot create standard input pipe for rev-list: Too many open files error: Could not run 'git rev-list' This may also occur during upload-pack when refs are packed (in the packed-refs file) and the number of packs that must be opened to verify that these packed refs exist exceeds the file descriptor limit. If the refs are loose, then upload-pack will read each ref from the object database (if the object is in a pack, allocating one or more mmap windows for it) in order to peel tags and advertise the underlying object. But when the refs are packed and peeled, upload-pack will use the peeled sha1 in the packed-refs file and will not need to read from the pack files, so no mmap windows will be allocated and just like with receive-pack, unuse_one_window() will never select these opened packs to close. When we have file descriptor pressure, we just need to find an open pack to close. We can leave the existing mmap windows open. If additional windows need to be mapped into the pack file, it will be reopened when necessary. If the pack file has been rewritten in the mean time, open_packed_git_1() should notice when it compares the file size or the pack's sha1 checksum to what was previously read from the pack index, and reject it. Let's introduce a new function close_one_pack() designed specifically for this purpose to search for and close the least-recently-used pack, where LRU is defined as (in order of preference): * pack with oldest mtime and no allocated mmap windows * pack with the least-recently-used windows, i.e. the pack with the oldest most-recently-used window, where none of the windows are in use * pack with the least-recently-used windows Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02 07:36:33 +02:00
{
struct object_id real_oid;
hash_object_file(r->hash_algo, buf, size, type, &real_oid);
return !oideq(oid, &real_oid) ? -1 : 0;
}
int stream_object_signature(struct repository *r, const struct object_id *oid)
{
struct object_id real_oid;
unsigned long size;
enum object_type obj_type;
struct git_istream *st;
git_hash_ctx c;
char hdr[MAX_HEADER_LEN];
int hdrlen;
sha1_file: introduce close_one_pack() to close packs on fd pressure When the number of open packs exceeds pack_max_fds, unuse_one_window() is called repeatedly to attempt to release the least-recently-used pack windows, which, as a side-effect, will also close a pack file after closing its last open window. If a pack file has been opened, but no windows have been allocated into it, it will never be selected by unuse_one_window() and hence its file descriptor will not be closed. When this happens, git may exceed the number of file descriptors permitted by the system. This latter situation can occur in show-ref or receive-pack during ref advertisement. During ref advertisement, receive-pack will iterate over every ref in the repository and advertise it to the client after ensuring that the ref exists in the local repository. If the ref is located inside a pack, then the pack is opened to ensure that it exists, but since the object is not actually read from the pack, no mmap windows are allocated. When the number of open packs exceeds pack_max_fds, unuse_one_window() will not be able to find any windows to free and will not be able to close any packs. Once the per-process file descriptor limit is exceeded, receive-pack will produce a warning, not an error, for each pack it cannot open, and will then most likely fail with an error to spawn rev-list or index-pack like: error: cannot create standard input pipe for rev-list: Too many open files error: Could not run 'git rev-list' This may also occur during upload-pack when refs are packed (in the packed-refs file) and the number of packs that must be opened to verify that these packed refs exist exceeds the file descriptor limit. If the refs are loose, then upload-pack will read each ref from the object database (if the object is in a pack, allocating one or more mmap windows for it) in order to peel tags and advertise the underlying object. But when the refs are packed and peeled, upload-pack will use the peeled sha1 in the packed-refs file and will not need to read from the pack files, so no mmap windows will be allocated and just like with receive-pack, unuse_one_window() will never select these opened packs to close. When we have file descriptor pressure, we just need to find an open pack to close. We can leave the existing mmap windows open. If additional windows need to be mapped into the pack file, it will be reopened when necessary. If the pack file has been rewritten in the mean time, open_packed_git_1() should notice when it compares the file size or the pack's sha1 checksum to what was previously read from the pack index, and reject it. Let's introduce a new function close_one_pack() designed specifically for this purpose to search for and close the least-recently-used pack, where LRU is defined as (in order of preference): * pack with oldest mtime and no allocated mmap windows * pack with the least-recently-used windows, i.e. the pack with the oldest most-recently-used window, where none of the windows are in use * pack with the least-recently-used windows Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02 07:36:33 +02:00
st = open_istream(r, oid, &obj_type, &size, NULL);
if (!st)
return -1;
sha1_file: introduce close_one_pack() to close packs on fd pressure When the number of open packs exceeds pack_max_fds, unuse_one_window() is called repeatedly to attempt to release the least-recently-used pack windows, which, as a side-effect, will also close a pack file after closing its last open window. If a pack file has been opened, but no windows have been allocated into it, it will never be selected by unuse_one_window() and hence its file descriptor will not be closed. When this happens, git may exceed the number of file descriptors permitted by the system. This latter situation can occur in show-ref or receive-pack during ref advertisement. During ref advertisement, receive-pack will iterate over every ref in the repository and advertise it to the client after ensuring that the ref exists in the local repository. If the ref is located inside a pack, then the pack is opened to ensure that it exists, but since the object is not actually read from the pack, no mmap windows are allocated. When the number of open packs exceeds pack_max_fds, unuse_one_window() will not be able to find any windows to free and will not be able to close any packs. Once the per-process file descriptor limit is exceeded, receive-pack will produce a warning, not an error, for each pack it cannot open, and will then most likely fail with an error to spawn rev-list or index-pack like: error: cannot create standard input pipe for rev-list: Too many open files error: Could not run 'git rev-list' This may also occur during upload-pack when refs are packed (in the packed-refs file) and the number of packs that must be opened to verify that these packed refs exist exceeds the file descriptor limit. If the refs are loose, then upload-pack will read each ref from the object database (if the object is in a pack, allocating one or more mmap windows for it) in order to peel tags and advertise the underlying object. But when the refs are packed and peeled, upload-pack will use the peeled sha1 in the packed-refs file and will not need to read from the pack files, so no mmap windows will be allocated and just like with receive-pack, unuse_one_window() will never select these opened packs to close. When we have file descriptor pressure, we just need to find an open pack to close. We can leave the existing mmap windows open. If additional windows need to be mapped into the pack file, it will be reopened when necessary. If the pack file has been rewritten in the mean time, open_packed_git_1() should notice when it compares the file size or the pack's sha1 checksum to what was previously read from the pack index, and reject it. Let's introduce a new function close_one_pack() designed specifically for this purpose to search for and close the least-recently-used pack, where LRU is defined as (in order of preference): * pack with oldest mtime and no allocated mmap windows * pack with the least-recently-used windows, i.e. the pack with the oldest most-recently-used window, where none of the windows are in use * pack with the least-recently-used windows Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02 07:36:33 +02:00
/* Generate the header */
hdrlen = format_object_header(hdr, sizeof(hdr), obj_type, size);
sha1_file: introduce close_one_pack() to close packs on fd pressure When the number of open packs exceeds pack_max_fds, unuse_one_window() is called repeatedly to attempt to release the least-recently-used pack windows, which, as a side-effect, will also close a pack file after closing its last open window. If a pack file has been opened, but no windows have been allocated into it, it will never be selected by unuse_one_window() and hence its file descriptor will not be closed. When this happens, git may exceed the number of file descriptors permitted by the system. This latter situation can occur in show-ref or receive-pack during ref advertisement. During ref advertisement, receive-pack will iterate over every ref in the repository and advertise it to the client after ensuring that the ref exists in the local repository. If the ref is located inside a pack, then the pack is opened to ensure that it exists, but since the object is not actually read from the pack, no mmap windows are allocated. When the number of open packs exceeds pack_max_fds, unuse_one_window() will not be able to find any windows to free and will not be able to close any packs. Once the per-process file descriptor limit is exceeded, receive-pack will produce a warning, not an error, for each pack it cannot open, and will then most likely fail with an error to spawn rev-list or index-pack like: error: cannot create standard input pipe for rev-list: Too many open files error: Could not run 'git rev-list' This may also occur during upload-pack when refs are packed (in the packed-refs file) and the number of packs that must be opened to verify that these packed refs exist exceeds the file descriptor limit. If the refs are loose, then upload-pack will read each ref from the object database (if the object is in a pack, allocating one or more mmap windows for it) in order to peel tags and advertise the underlying object. But when the refs are packed and peeled, upload-pack will use the peeled sha1 in the packed-refs file and will not need to read from the pack files, so no mmap windows will be allocated and just like with receive-pack, unuse_one_window() will never select these opened packs to close. When we have file descriptor pressure, we just need to find an open pack to close. We can leave the existing mmap windows open. If additional windows need to be mapped into the pack file, it will be reopened when necessary. If the pack file has been rewritten in the mean time, open_packed_git_1() should notice when it compares the file size or the pack's sha1 checksum to what was previously read from the pack index, and reject it. Let's introduce a new function close_one_pack() designed specifically for this purpose to search for and close the least-recently-used pack, where LRU is defined as (in order of preference): * pack with oldest mtime and no allocated mmap windows * pack with the least-recently-used windows, i.e. the pack with the oldest most-recently-used window, where none of the windows are in use * pack with the least-recently-used windows Signed-off-by: Brandon Casey <drafnel@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02 07:36:33 +02:00
/* Sha1.. */
r->hash_algo->init_fn(&c);
r->hash_algo->update_fn(&c, hdr, hdrlen);
for (;;) {
char buf[1024 * 16];
ssize_t readlen = read_istream(st, buf, sizeof(buf));
if (readlen < 0) {
close_istream(st);
return -1;
}
if (!readlen)
break;
r->hash_algo->update_fn(&c, buf, readlen);
}
r->hash_algo->final_oid_fn(&real_oid, &c);
close_istream(st);
return !oideq(oid, &real_oid) ? -1 : 0;
}
int git_open_cloexec(const char *name, int flags)
{
int fd;
static int o_cloexec = O_CLOEXEC;
fd = open(name, flags | o_cloexec);
if ((o_cloexec & O_CLOEXEC) && fd < 0 && errno == EINVAL) {
/* Try again w/o O_CLOEXEC: the kernel might not support it */
o_cloexec &= ~O_CLOEXEC;
fd = open(name, flags | o_cloexec);
}
#if defined(F_GETFD) && defined(F_SETFD) && defined(FD_CLOEXEC)
{
static int fd_cloexec = FD_CLOEXEC;
if (!o_cloexec && 0 <= fd && fd_cloexec) {
/* Opened w/o O_CLOEXEC? try with fcntl(2) to add it */
int flags = fcntl(fd, F_GETFD);
if (fcntl(fd, F_SETFD, flags | fd_cloexec))
fd_cloexec = 0;
}
}
#endif
return fd;
}
/*
* Find "oid" as a loose object in the local repository or in an alternate.
* Returns 0 on success, negative on failure.
*
* The "path" out-parameter will give the path of the object we found (if any).
* Note that it may point to static storage and is only valid until another
* call to stat_loose_object().
*/
static int stat_loose_object(struct repository *r, const struct object_id *oid,
struct stat *st, const char **path)
{
struct object_directory *odb;
static struct strbuf buf = STRBUF_INIT;
prepare_alt_odb(r);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
for (odb = r->objects->odb; odb; odb = odb->next) {
*path = odb_loose_path(odb, &buf, oid);
if (!lstat(*path, st))
return 0;
}
return -1;
}
/*
* Like stat_loose_object(), but actually open the object and return the
* descriptor. See the caveats on the "path" parameter above.
*/
static int open_loose_object(struct repository *r,
const struct object_id *oid, const char **path)
Fully activate the sliding window pack access. This finally turns on the sliding window behavior for packfile data access by mapping limited size windows and chaining them under the packed_git->windows list. We consider a given byte offset to be within the window only if there would be at least 20 bytes (one hash worth of data) accessible after the requested offset. This range selection relates to the contract that use_pack() makes with its callers, allowing them to access one hash or one object header without needing to call use_pack() for every byte of data obtained. In the worst case scenario we will map the same page of data twice into memory: once at the end of one window and once again at the start of the next window. This duplicate page mapping will happen only when an object header or a delta base reference is spanned over the end of a window and is always limited to just one page of duplication, as no sane operating system will ever have a page size smaller than a hash. I am assuming that the possible wasted page of virtual address space is going to perform faster than the alternatives, which would be to copy the object header or ref delta into a temporary buffer prior to parsing, or to check the window range on every byte during header parsing. We may decide to revisit this decision in the future since this is just a gut instinct decision and has not actually been proven out by experimental testing. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-23 08:34:28 +01:00
{
int fd;
struct object_directory *odb;
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
int most_interesting_errno = ENOENT;
static struct strbuf buf = STRBUF_INIT;
prepare_alt_odb(r);
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
for (odb = r->objects->odb; odb; odb = odb->next) {
*path = odb_loose_path(odb, &buf, oid);
fd = git_open(*path);
if (fd >= 0)
return fd;
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
if (most_interesting_errno == ENOENT)
most_interesting_errno = errno;
Replace use_packed_git with window cursors. Part of the implementation concept of the sliding mmap window for pack access is to permit multiple windows per pack to be mapped independently. Since the inuse_cnt is associated with the mmap and not with the file, this value is in struct pack_window and needs to be incremented/decremented for each pack_window accessed by any code. To faciliate that implementation we need to replace all uses of use_packed_git() and unuse_packed_git() with a different API that follows struct pack_window objects rather than struct packed_git. The way this works is when we need to start accessing a pack for the first time we should setup a new window 'cursor' by declaring a local and setting it to NULL: struct pack_windows *w_curs = NULL; To obtain the memory region which contains a specific section of the pack file we invoke use_pack(), supplying the address of our current window cursor: unsigned int len; unsigned char *addr = use_pack(p, &w_curs, offset, &len); the returned address `addr` will be the first byte at `offset` within the pack file. The optional variable len will also be updated with the number of bytes remaining following the address. Multiple calls to use_pack() with the same window cursor will update the window cursor, moving it from one window to another when necessary. In this way each window cursor variable maintains only one struct pack_window inuse at a time. Finally before exiting the scope which originally declared the window cursor we must invoke unuse_pack() to unuse the current window (which may be different from the one that was first obtained from use_pack): unuse_pack(&w_curs); This implementation is still not complete with regards to multiple windows, as only one window per pack file is supported right now. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-23 08:34:08 +01:00
}
errno = most_interesting_errno;
return -1;
}
sha1-file: use loose object cache for quick existence check In cases where we expect to ask has_sha1_file() about a lot of objects that we are not likely to have (e.g., during fetch negotiation), we already use OBJECT_INFO_QUICK to sacrifice accuracy (due to racing with a simultaneous write or repack) for speed (we avoid re-scanning the pack directory). However, even checking for loose objects can be expensive, as we will stat() each one. On many systems this cost isn't too noticeable, but stat() can be particularly slow on some operating systems, or due to network filesystems. Since the QUICK flag already tells us that we're OK with a slightly stale answer, we can use that as a cue to look in our in-memory cache of each object directory. That basically trades an in-memory binary search for a stat() call. Note that it is possible for this to actually be _slower_. We'll do a full readdir() to fill the cache, so if you have a very large number of loose objects and a very small number of lookups, that readdir() may end up more expensive. This shouldn't be a big deal in practice. If you have a large number of reachable loose objects, you'll already run into performance problems (which you should remedy by repacking). You may have unreachable objects which wouldn't otherwise impact performance. Usually these would go away with the prune step of "git gc", but they may be held for up to 2 weeks in the default configuration. So it comes down to how many such objects you might reasonably expect to have, how much slower is readdir() on N entries versus M stat() calls (and here we really care about the syscall backing readdir(), like getdents() on Linux, but I'll just call this readdir() below). If N is much smaller than M (a typical packed repo), we know this is a big win (few readdirs() followed by many uses of the resulting cache). When N and M are similar in size, it's also a win. We care about the latency of making a syscall, and readdir() should be giving us many values in a single call. How many? On Linux, running "strace -e getdents ls" shows a 32k buffer getting 512 entries per call (which is 64 bytes per entry; the name itself is 38 bytes, plus there are some other fields). So we can imagine that this is always a win as long as the number of loose objects in the repository is a factor of 500 less than the number of lookups you make. It's hard to auto-tune this because we don't generally know up front how many lookups we're going to do. But it's unlikely for this to perform significantly worse. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:54:42 +01:00
static int quick_has_loose(struct repository *r,
const struct object_id *oid)
sha1-file: use loose object cache for quick existence check In cases where we expect to ask has_sha1_file() about a lot of objects that we are not likely to have (e.g., during fetch negotiation), we already use OBJECT_INFO_QUICK to sacrifice accuracy (due to racing with a simultaneous write or repack) for speed (we avoid re-scanning the pack directory). However, even checking for loose objects can be expensive, as we will stat() each one. On many systems this cost isn't too noticeable, but stat() can be particularly slow on some operating systems, or due to network filesystems. Since the QUICK flag already tells us that we're OK with a slightly stale answer, we can use that as a cue to look in our in-memory cache of each object directory. That basically trades an in-memory binary search for a stat() call. Note that it is possible for this to actually be _slower_. We'll do a full readdir() to fill the cache, so if you have a very large number of loose objects and a very small number of lookups, that readdir() may end up more expensive. This shouldn't be a big deal in practice. If you have a large number of reachable loose objects, you'll already run into performance problems (which you should remedy by repacking). You may have unreachable objects which wouldn't otherwise impact performance. Usually these would go away with the prune step of "git gc", but they may be held for up to 2 weeks in the default configuration. So it comes down to how many such objects you might reasonably expect to have, how much slower is readdir() on N entries versus M stat() calls (and here we really care about the syscall backing readdir(), like getdents() on Linux, but I'll just call this readdir() below). If N is much smaller than M (a typical packed repo), we know this is a big win (few readdirs() followed by many uses of the resulting cache). When N and M are similar in size, it's also a win. We care about the latency of making a syscall, and readdir() should be giving us many values in a single call. How many? On Linux, running "strace -e getdents ls" shows a 32k buffer getting 512 entries per call (which is 64 bytes per entry; the name itself is 38 bytes, plus there are some other fields). So we can imagine that this is always a win as long as the number of loose objects in the repository is a factor of 500 less than the number of lookups you make. It's hard to auto-tune this because we don't generally know up front how many lookups we're going to do. But it's unlikely for this to perform significantly worse. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:54:42 +01:00
{
struct object_directory *odb;
prepare_alt_odb(r);
for (odb = r->objects->odb; odb; odb = odb->next) {
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-08 01:10:19 +02:00
if (oidtree_contains(odb_loose_cache(odb, oid), oid))
sha1-file: use loose object cache for quick existence check In cases where we expect to ask has_sha1_file() about a lot of objects that we are not likely to have (e.g., during fetch negotiation), we already use OBJECT_INFO_QUICK to sacrifice accuracy (due to racing with a simultaneous write or repack) for speed (we avoid re-scanning the pack directory). However, even checking for loose objects can be expensive, as we will stat() each one. On many systems this cost isn't too noticeable, but stat() can be particularly slow on some operating systems, or due to network filesystems. Since the QUICK flag already tells us that we're OK with a slightly stale answer, we can use that as a cue to look in our in-memory cache of each object directory. That basically trades an in-memory binary search for a stat() call. Note that it is possible for this to actually be _slower_. We'll do a full readdir() to fill the cache, so if you have a very large number of loose objects and a very small number of lookups, that readdir() may end up more expensive. This shouldn't be a big deal in practice. If you have a large number of reachable loose objects, you'll already run into performance problems (which you should remedy by repacking). You may have unreachable objects which wouldn't otherwise impact performance. Usually these would go away with the prune step of "git gc", but they may be held for up to 2 weeks in the default configuration. So it comes down to how many such objects you might reasonably expect to have, how much slower is readdir() on N entries versus M stat() calls (and here we really care about the syscall backing readdir(), like getdents() on Linux, but I'll just call this readdir() below). If N is much smaller than M (a typical packed repo), we know this is a big win (few readdirs() followed by many uses of the resulting cache). When N and M are similar in size, it's also a win. We care about the latency of making a syscall, and readdir() should be giving us many values in a single call. How many? On Linux, running "strace -e getdents ls" shows a 32k buffer getting 512 entries per call (which is 64 bytes per entry; the name itself is 38 bytes, plus there are some other fields). So we can imagine that this is always a win as long as the number of loose objects in the repository is a factor of 500 less than the number of lookups you make. It's hard to auto-tune this because we don't generally know up front how many lookups we're going to do. But it's unlikely for this to perform significantly worse. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:54:42 +01:00
return 1;
}
return 0;
}
/*
* Map the loose object at "path" if it is not NULL, or the path found by
* searching for a loose object named "oid".
*/
static void *map_loose_object_1(struct repository *r, const char *path,
const struct object_id *oid, unsigned long *size)
{
void *map;
int fd;
if (path)
fd = git_open(path);
delta_base_cache: use hashmap.h The fundamental data structure of the delta base cache is a hash table mapping pairs of "(packfile, offset)" into structs containing the actual object data. The hash table implementation dates back to e5e0161 (Implement a simple delta_base cache, 2007-03-17), and uses a fixed-size table. The current size is a hard-coded 256 entries. Because we need to be able to remove objects from the hash table, entry lookup does not do any kind of probing to handle collisions. Colliding items simply replace whatever is in their slot. As a result, we have fewer usable slots than even the 256 we allocate. At half full, each new item has a 50% chance of displacing another one. Or another way to think about it: every item has a 1/256 chance of being ejected due to hash collision, without regard to our LRU strategy. So it would be interesting to see the effect of increasing the cache size on the runtime for some common operations. As with the previous patch, we'll measure "git log --raw" for tree-only operations, and "git log -Sfoo --raw" for operations that touch trees and blobs. All times are wall-clock best-of-3, done against fully packed repos with --depth=50, and the default core.deltaBaseCacheLimit of 96MB. Here are timings for various values of MAX_DELTA_CACHE against git.git (the asterisk marks the minimum time for each operation): MAX_DELTA_CACHE log-raw log-S --------------- --------- --------- 256 0m02.227s 0m12.821s 512 0m02.143s 0m10.602s 1024 0m02.127s 0m08.642s 2048 0m02.148s 0m07.123s 4096 0m02.194s 0m06.448s* 8192 0m02.239s 0m06.504s 16384 0m02.144s* 0m06.502s 32768 0m02.202s 0m06.622s 65536 0m02.230s 0m06.677s The log-raw case isn't changed much at all here (probably because our trees just aren't that big in the first place, or possibly because we have so _few_ trees in git.git that the 256-entry cache is enough). But once we start putting blobs in the cache, too, we see a big improvement (almost 50%). The curve levels off around 4096, which means that we can hold about that many entries before hitting the 96MB memory limit (or possibly that the workload is small enough that there is simply no more work to be optimized out by caching more). (As a side note, I initially timed my existing git.git pack, which was a base of --aggressive combined with some pulls on top. So it had quite a few deeper delta chains. The 256-cache case was more like 15s, and it still dropped to ~6.5s in the same way). Here are the timings for linux.git: MAX_DELTA_CACHE log-raw log-S --------------- --------- --------- 256 0m41.661s 5m12.410s 512 0m39.547s 5m07.920s 1024 0m37.054s 4m54.666s 2048 0m35.871s 4m41.194s* 4096 0m34.646s 4m51.648s 8192 0m33.881s 4m55.342s 16384 0m35.190s 5m00.122s 32768 0m35.060s 4m58.851s 65536 0m33.311s* 4m51.420s As we grow we see a nice 20% speedup in the tree traversal, and more modest 10% in the log-S. This is probably an indication that we are bound less by the number of entries, and more by the memory limit (more on that below). What is interesting is that the numbers bounce around a bit; increasing the number of entries isn't always a strict improvement. Partially this is due to noise in the measurement. But it may also be an indication that our LRU ejection scheme is not optimal. The smaller cache sizes introduce some randomness into the ejection (due to collisions), which may sometimes work in our favor (and sometimes not!). So what is the optimal setting of MAX_DELTA_CACHE? The "bouncing" in the linux.git log-S numbers notwithstanding, it mostly seems like bigger is better. And even if we were to try to find a "sweet spot", these are just two repositories, that are not necessarily representative. The shape of history, the size of trees and blobs, the memory limit configuration, etc, all will affect the outcome. Rather than trying to find the "right" number, another strategy is to just switch to a hash table that can actually store collisions: namely our hashmap.h implementation. Here are numbers for that compared to the "best" we saw from adjusting MAX_DELTA_CACHE: | log-raw | log-S | best hashmap | best hashmap | --------- --------- | --------- --------- git | 0m02.144s 0m02.144s | 0m06.448s 0m06.688s linux | 0m33.311s 0m33.092s | 4m41.194s 4m57.172s We can see the results are similar in most cases, which is what we'd expect. We're not ejecting due to collisions at all, so this is purely representing the LRU. So really, we'd expect this to model most closely the larger values of the static MAX_DELTA_CACHE limit. And that does seem to be what's happening, including the "bounce" in the linux log-S case. So while the value for that case _isn't_ as good as the optimal one measured above (which was 2048 entries), given the bouncing I'm hesitant to suggest that 2048 is any kind of optimum (not even for linux.git, let alone as a general rule). The generic hashmap has the appeal that it drops the number of tweakable numbers by one, which means we can focus on tuning other elements, like the LRU strategy or the core.deltaBaseCacheLimit setting. And indeed, if we bump the cache limit to 1G (which is probably silly for general use, but maybe something people with big workstations would want to do), the linux.git log-S time drops to 3m32s. That's something you really _can't_ do easily with the static hash table, because the number of entries needs to grow in proportion to the memory limit (so 2048 is almost certainly not going to be the right value there). This patch takes that direction, and drops the static hash table entirely in favor of using the hashmap.h API. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-23 00:00:07 +02:00
else
fd = open_loose_object(r, oid, &path);
map = NULL;
if (fd >= 0) {
struct stat st;
if (!fstat(fd, &st)) {
*size = xsize_t(st.st_size);
if (!*size) {
/* mmap() is forbidden on empty files */
error(_("object file %s is empty"), path);
close(fd);
return NULL;
}
map = xmmap(NULL, *size, PROT_READ, MAP_PRIVATE, fd, 0);
}
close(fd);
}
return map;
}
void *map_loose_object(struct repository *r,
const struct object_id *oid,
unsigned long *size)
{
return map_loose_object_1(r, NULL, oid, size);
}
enum unpack_loose_header_result unpack_loose_header(git_zstream *stream,
unsigned char *map,
unsigned long mapsize,
void *buffer,
unsigned long bufsiz,
struct strbuf *header)
{
int status;
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
/* Get the data stream */
memset(stream, 0, sizeof(*stream));
stream->next_in = map;
stream->avail_in = mapsize;
stream->next_out = buffer;
stream->avail_out = bufsiz;
git_inflate_init(stream);
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
obj_read_unlock();
status = git_inflate(stream, 0);
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
obj_read_lock();
unpack_sha1_header(): detect malformed object header When opening a loose object file, we often do this sequence: - prepare a short buffer for the object header (on stack) - call unpack_sha1_header() and have early part of the object data inflated, enough to fill the buffer - parse that data in the short buffer, assuming that the first part of the object is <typename> SP <length> NUL Because the parsing function parse_sha1_header_extended() is not given the number of bytes inflated into the header buffer, it you craft a file whose early part inflates a garbage sequence without SP or NUL, and replace a loose object with it, it will end up reading past the end of the inflated data. To correct this, do the following four things: - rename unpack_sha1_header() to unpack_sha1_short_header() and have unpack_sha1_header_to_strbuf() keep calling that as its helper function. This will detect and report zlib errors, but is not aware of the format of a loose object (as before). - introduce unpack_sha1_header() that calls the same helper function, and when zlib reports it inflated OK into the buffer, check if the inflated data has NUL. This would ensure that parsing function will terminate within the buffer that holds the inflated header. - update unpack_sha1_header_to_strbuf() to check if the resulting buffer has NUL for the same effect. - update parse_sha1_header_extended() to make sure that its loop to find the SP that terminates the <typename> stops at NUL. Essentially, this makes unpack_*() functions that are asked to unpack a loose object header to be a bit more strict and detect an input that cannot possibly be a valid object header, even before the parsing function kicks in. Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-26 06:29:04 +02:00
if (status < Z_OK)
return ULHR_BAD;
/*
* Check if entire header is unpacked in the first iteration.
*/
if (memchr(buffer, '\0', stream->next_out - (unsigned char *)buffer))
return ULHR_OK;
/*
* We have a header longer than MAX_HEADER_LEN. The "header"
* here is only non-NULL when we run "cat-file
* --allow-unknown-type".
*/
if (!header)
return ULHR_TOO_LONG;
/*
* buffer[0..bufsiz] was not large enough. Copy the partial
* result out to header, and then append the result of further
* reading the stream.
*/
strbuf_add(header, buffer, stream->next_out - (unsigned char *)buffer);
stream->next_out = buffer;
stream->avail_out = bufsiz;
do {
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
obj_read_unlock();
status = git_inflate(stream, 0);
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
obj_read_lock();
strbuf_add(header, buffer, stream->next_out - (unsigned char *)buffer);
if (memchr(buffer, '\0', stream->next_out - (unsigned char *)buffer))
return 0;
stream->next_out = buffer;
stream->avail_out = bufsiz;
} while (status != Z_STREAM_END);
return ULHR_TOO_LONG;
}
static void *unpack_loose_rest(git_zstream *stream,
void *buffer, unsigned long size,
const struct object_id *oid)
{
int bytes = strlen(buffer) + 1;
unsigned char *buf = xmallocz(size);
unsigned long n;
int status = Z_OK;
n = stream->total_out - bytes;
if (n > size)
n = size;
memcpy(buf, (char *) buffer + bytes, n);
bytes = n;
if (bytes <= size) {
/*
* The above condition must be (bytes <= size), not
* (bytes < size). In other words, even though we
* expect no more output and set avail_out to zero,
* the input zlib stream may have bytes that express
* "this concludes the stream", and we *do* want to
* eat that input.
*
* Otherwise we would not be able to test that we
* consumed all the input to reach the expected size;
* we also want to check that zlib tells us that all
* went well with status == Z_STREAM_END at the end.
*/
stream->next_out = buf + bytes;
stream->avail_out = size - bytes;
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
while (status == Z_OK) {
obj_read_unlock();
status = git_inflate(stream, Z_FINISH);
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
obj_read_lock();
}
}
if (status == Z_STREAM_END && !stream->avail_in) {
git_inflate_end(stream);
return buf;
}
if (status < 0)
error(_("corrupt loose object '%s'"), oid_to_hex(oid));
else if (stream->avail_in)
error(_("garbage at end of loose object '%s'"),
oid_to_hex(oid));
free(buf);
return NULL;
}
/*
* We used to just use "sscanf()", but that's actually way
* too permissive for what we want to check. So do an anal
* object header parse by hand.
*/
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
int parse_loose_header(const char *hdr, struct object_info *oi)
{
const char *type_buf = hdr;
size_t size;
int type, type_len = 0;
/*
* The type can be of any size but is followed by
* a space.
*/
for (;;) {
char c = *hdr++;
unpack_sha1_header(): detect malformed object header When opening a loose object file, we often do this sequence: - prepare a short buffer for the object header (on stack) - call unpack_sha1_header() and have early part of the object data inflated, enough to fill the buffer - parse that data in the short buffer, assuming that the first part of the object is <typename> SP <length> NUL Because the parsing function parse_sha1_header_extended() is not given the number of bytes inflated into the header buffer, it you craft a file whose early part inflates a garbage sequence without SP or NUL, and replace a loose object with it, it will end up reading past the end of the inflated data. To correct this, do the following four things: - rename unpack_sha1_header() to unpack_sha1_short_header() and have unpack_sha1_header_to_strbuf() keep calling that as its helper function. This will detect and report zlib errors, but is not aware of the format of a loose object (as before). - introduce unpack_sha1_header() that calls the same helper function, and when zlib reports it inflated OK into the buffer, check if the inflated data has NUL. This would ensure that parsing function will terminate within the buffer that holds the inflated header. - update unpack_sha1_header_to_strbuf() to check if the resulting buffer has NUL for the same effect. - update parse_sha1_header_extended() to make sure that its loop to find the SP that terminates the <typename> stops at NUL. Essentially, this makes unpack_*() functions that are asked to unpack a loose object header to be a bit more strict and detect an input that cannot possibly be a valid object header, even before the parsing function kicks in. Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-26 06:29:04 +02:00
if (!c)
return -1;
if (c == ' ')
break;
type_len++;
}
type = type_from_string_gently(type_buf, type_len, 1);
if (oi->type_name)
strbuf_add(oi->type_name, type_buf, type_len);
if (oi->typep)
*oi->typep = type;
/*
* The length must follow immediately, and be in canonical
* decimal format (ie "010" is not valid).
*/
size = *hdr++ - '0';
if (size > 9)
return -1;
if (size) {
for (;;) {
unsigned long c = *hdr - '0';
if (c > 9)
break;
hdr++;
size = st_add(st_mult(size, 10), c);
}
}
if (oi->sizep)
*oi->sizep = cast_size_t_to_ulong(size);
/*
* The length must be followed by a zero byte
*/
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
if (*hdr)
return -1;
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
/*
* The format is valid, but the type may still be bogus. The
* Caller needs to check its oi->typep.
*/
return 0;
}
static int loose_object_info(struct repository *r,
const struct object_id *oid,
struct object_info *oi, int flags)
{
int status = 0;
unsigned long mapsize;
void *map;
2011-06-10 20:52:15 +02:00
git_zstream stream;
char hdr[MAX_HEADER_LEN];
struct strbuf hdrbuf = STRBUF_INIT;
unsigned long size_scratch;
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
enum object_type type_scratch;
int allow_unknown = flags & OBJECT_INFO_ALLOW_UNKNOWN_TYPE;
if (oi->delta_base_oid)
oidclr(oi->delta_base_oid);
/*
* If we don't care about type or size, then we don't
* need to look inside the object at all. Note that we
* do not optimize out the stat call, even if the
* caller doesn't care about the disk-size, since our
* return value implicitly indicates whether the
* object even exists.
*/
if (!oi->typep && !oi->type_name && !oi->sizep && !oi->contentp) {
const char *path;
struct stat st;
sha1-file: use loose object cache for quick existence check In cases where we expect to ask has_sha1_file() about a lot of objects that we are not likely to have (e.g., during fetch negotiation), we already use OBJECT_INFO_QUICK to sacrifice accuracy (due to racing with a simultaneous write or repack) for speed (we avoid re-scanning the pack directory). However, even checking for loose objects can be expensive, as we will stat() each one. On many systems this cost isn't too noticeable, but stat() can be particularly slow on some operating systems, or due to network filesystems. Since the QUICK flag already tells us that we're OK with a slightly stale answer, we can use that as a cue to look in our in-memory cache of each object directory. That basically trades an in-memory binary search for a stat() call. Note that it is possible for this to actually be _slower_. We'll do a full readdir() to fill the cache, so if you have a very large number of loose objects and a very small number of lookups, that readdir() may end up more expensive. This shouldn't be a big deal in practice. If you have a large number of reachable loose objects, you'll already run into performance problems (which you should remedy by repacking). You may have unreachable objects which wouldn't otherwise impact performance. Usually these would go away with the prune step of "git gc", but they may be held for up to 2 weeks in the default configuration. So it comes down to how many such objects you might reasonably expect to have, how much slower is readdir() on N entries versus M stat() calls (and here we really care about the syscall backing readdir(), like getdents() on Linux, but I'll just call this readdir() below). If N is much smaller than M (a typical packed repo), we know this is a big win (few readdirs() followed by many uses of the resulting cache). When N and M are similar in size, it's also a win. We care about the latency of making a syscall, and readdir() should be giving us many values in a single call. How many? On Linux, running "strace -e getdents ls" shows a 32k buffer getting 512 entries per call (which is 64 bytes per entry; the name itself is 38 bytes, plus there are some other fields). So we can imagine that this is always a win as long as the number of loose objects in the repository is a factor of 500 less than the number of lookups you make. It's hard to auto-tune this because we don't generally know up front how many lookups we're going to do. But it's unlikely for this to perform significantly worse. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:54:42 +01:00
if (!oi->disk_sizep && (flags & OBJECT_INFO_QUICK))
return quick_has_loose(r, oid) ? 0 : -1;
if (stat_loose_object(r, oid, &st, &path) < 0)
return -1;
if (oi->disk_sizep)
*oi->disk_sizep = st.st_size;
return 0;
}
map = map_loose_object(r, oid, &mapsize);
if (!map)
return -1;
if (!oi->sizep)
oi->sizep = &size_scratch;
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
if (!oi->typep)
oi->typep = &type_scratch;
if (oi->disk_sizep)
*oi->disk_sizep = mapsize;
switch (unpack_loose_header(&stream, map, mapsize, hdr, sizeof(hdr),
allow_unknown ? &hdrbuf : NULL)) {
case ULHR_OK:
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
if (parse_loose_header(hdrbuf.len ? hdrbuf.buf : hdr, oi) < 0)
status = error(_("unable to parse %s header"), oid_to_hex(oid));
else if (!allow_unknown && *oi->typep < 0)
die(_("invalid object type"));
if (!oi->contentp)
break;
*oi->contentp = unpack_loose_rest(&stream, hdr, *oi->sizep, oid);
if (*oi->contentp)
goto cleanup;
status = -1;
break;
case ULHR_BAD:
status = error(_("unable to unpack %s header"),
oid_to_hex(oid));
break;
case ULHR_TOO_LONG:
status = error(_("header for %s too long, exceeds %d bytes"),
oid_to_hex(oid), MAX_HEADER_LEN);
break;
}
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
git_inflate_end(&stream);
cleanup:
munmap(map, mapsize);
if (oi->sizep == &size_scratch)
oi->sizep = NULL;
strbuf_release(&hdrbuf);
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
if (oi->typep == &type_scratch)
oi->typep = NULL;
oi->whence = OI_LOOSE;
object-file.c: stop dying in parse_loose_header() Make parse_loose_header() return error codes and data instead of invoking die() by itself. For now we'll move the relevant die() call to loose_object_info() and read_loose_object() to keep this change smaller. In a subsequent commit we'll make read_loose_object() return an error code instead of dying. We should also address the "allow_unknown" case (should be moved to builtin/cat-file.c), but for now I'll be leaving it. For making parse_loose_header() not die() change its prototype to accept a "struct object_info *" instead of the "unsigned long *sizep" it accepted before. Its callers can now check the populated populated "oi->typep". Because of this we don't need to pass in the "unsigned int flags" which we used for OBJECT_INFO_ALLOW_UNKNOWN_TYPE, we can instead do that check in loose_object_info(). This also refactors some confusing control flow around the "status" variable. In some cases we set it to the return value of "error()", i.e. -1, and later checked if "status < 0" was true. Since 93cff9a978e (sha1_loose_object_info: return error for corrupted objects, 2017-04-01) the return value of loose_object_info() (then named sha1_loose_object_info()) had been a "status" variable that be any negative value, as we were expecting to return the "enum object_type". The only negative type happens to be OBJ_BAD, but the code still assumed that more might be added. This was then used later in e.g. c84a1f3ed4d (sha1_file: refactor read_object, 2017-06-21). Now that parse_loose_header() will return 0 on success instead of the type (which it'll stick into the "struct object_info") we don't need to conflate these two cases in its callers. Since parse_loose_header() doesn't need to return an arbitrary "status" we only need to treat its "ret < 0" specially, but can idiomatically overwrite it with our own error() return. This along with having made unpack_loose_header() return an "enum unpack_loose_header_result" in an earlier commit means that we can move the previously nested if/else cases mostly into the "ULHR_OK" branch of the "switch" statement. We should be less silent if we reach that "status = -1" branch, which happens if we've got trailing garbage in loose objects, see f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for a better way to handle it. For now let's punt on it, a subsequent commit will address that edge case. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:51 +02:00
return status;
}
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
int obj_read_use_lock = 0;
pthread_mutex_t obj_read_mutex;
void enable_obj_read_lock(void)
{
if (obj_read_use_lock)
return;
obj_read_use_lock = 1;
init_recursive_mutex(&obj_read_mutex);
}
void disable_obj_read_lock(void)
{
if (!obj_read_use_lock)
return;
obj_read_use_lock = 0;
pthread_mutex_destroy(&obj_read_mutex);
}
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
int fetch_if_missing = 1;
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
static int do_oid_object_info_extended(struct repository *r,
const struct object_id *oid,
struct object_info *oi, unsigned flags)
{
static struct object_info blank_oi = OBJECT_INFO_INIT;
sha1-file: remove OBJECT_INFO_SKIP_CACHED In a partial clone, if a user provides the hash of the empty tree ("git mktree </dev/null" - for SHA-1, this is 4b825d...) to a command which requires that that object be parsed, for example: git diff-tree 4b825d <a non-empty tree> then Git will lazily fetch the empty tree, unnecessarily, because parsing of that object invokes repo_has_object_file(), which does not special-case the empty tree. Instead, teach repo_has_object_file() to consult find_cached_object() (which handles the empty tree), thus bringing it in line with the rest of the object-store-accessing functions. A cost is that repo_has_object_file() will now need to oideq upon each invocation, but that is trivial compared to the filesystem lookup or the pack index search required anyway. (And if find_cached_object() needs to do more because of previous invocations to pretend_object_file(), all the more reason to be consistent in whether we present cached objects.) As a historical note, the function now known as repo_read_object_file() was taught the empty tree in 346245a1bb ("hard-code the empty tree object", 2008-02-13), and the function now known as oid_object_info() was taught the empty tree in c4d9986f5f ("sha1_object_info: examine cached_object store too", 2011-02-07). repo_has_object_file() was never updated, perhaps due to oversight. The flag OBJECT_INFO_SKIP_CACHED, introduced later in dfdd4afcf9 ("sha1_file: teach sha1_object_info_extended more flags", 2017-06-26) and used in e83e71c5e1 ("sha1_file: refactor has_sha1_file_with_flags", 2017-06-26), was introduced to preserve this difference in empty-tree handling, but now it can be removed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-02 21:16:30 +01:00
struct cached_object *co;
struct pack_entry e;
sha1_object_info_extended: make type calculation optional Each caller of sha1_object_info_extended sets up an object_info struct to tell the function which elements of the object it wants to get. Until now, getting the type of the object has always been required (and it is returned via the return type rather than a pointer in object_info). This can involve actually opening a loose object file to determine its type, or following delta chains to determine a packed file's base type. These effects produce a measurable slow-down when doing a "cat-file --batch-check" that does not include %(objecttype). This patch adds a "typep" query to struct object_info, so that it can be optionally queried just like size and disk_size. As a result, the return type of the function is no longer the object type, but rather 0/-1 for success/error. As there are only three callers total, we just fix up each caller rather than keep a compatibility wrapper: 1. The simpler sha1_object_info wrapper continues to always ask for and return the type field. 2. The istream_source function wants to know the type, and so always asks for it. 3. The cat-file batch code asks for the type only when %(objecttype) is part of the format string. On linux.git, the best-of-five for running: $ git rev-list --objects --all >objects $ time git cat-file --batch-check='%(objectsize:disk)' on a fully packed repository goes from: real 0m8.680s user 0m8.160s sys 0m0.512s to: real 0m7.205s user 0m6.580s sys 0m0.608s Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12 08:34:57 +02:00
int rtype;
const struct object_id *real = oid;
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
int already_retried = 0;
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
if (flags & OBJECT_INFO_LOOKUP_REPLACE)
real = lookup_replace_object(r, oid);
if (is_null_oid(real))
sha1_file: fast-path null sha1 as a missing object In theory nobody should ever ask the low-level object code for a null sha1. It's used as a sentinel for "no such object" in lots of places, so leaking through to this level is a sign that the higher-level code is not being careful about its error-checking. In practice, though, quite a few code paths seem to rely on the null sha1 lookup failing as a way to quietly propagate non-existence (e.g., by feeding it to lookup_commit_reference_gently(), which then returns NULL). When this happens, we do two inefficient things: 1. We actually search for the null sha1 in packs and in the loose object directory. 2. When we fail to find it, we re-scan the pack directory in case a simultaneous repack happened to move it from loose to packed. This can be very expensive if you have a large number of packs. Only the second one actually causes noticeable performance problems, so we could treat them independently. But for the sake of simplicity (both of code and of reasoning about it), it makes sense to just declare that the null sha1 cannot be a real on-disk object, and looking it up will always return "no such object". There's no real loss of functionality to do so Its use as a sentinel value means that anybody who is unlucky enough to hit the 2^-160th chance of generating an object with that sha1 is already going to find the object largely unusable. In an ideal world, we'd simply fix all of the callers to notice the null sha1 and avoid passing it to us. But a simple experiment to catch this with a BUG() shows that there are a large number of code paths that do so. So in the meantime, let's fix the performance problem by taking a fast exit from the object lookup when we see a null sha1. p5551 shows off the improvement (when a fetched ref is new, the "old" sha1 is 0{40}, which ends up being passed for fast-forward checks, the status table abbreviations, etc): Test HEAD^ HEAD -------------------------------------------------------- 5551.4: fetch 5.51(5.03+0.48) 0.17(0.10+0.06) -96.9% Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-22 00:17:39 +01:00
return -1;
if (!oi)
oi = &blank_oi;
sha1-file: remove OBJECT_INFO_SKIP_CACHED In a partial clone, if a user provides the hash of the empty tree ("git mktree </dev/null" - for SHA-1, this is 4b825d...) to a command which requires that that object be parsed, for example: git diff-tree 4b825d <a non-empty tree> then Git will lazily fetch the empty tree, unnecessarily, because parsing of that object invokes repo_has_object_file(), which does not special-case the empty tree. Instead, teach repo_has_object_file() to consult find_cached_object() (which handles the empty tree), thus bringing it in line with the rest of the object-store-accessing functions. A cost is that repo_has_object_file() will now need to oideq upon each invocation, but that is trivial compared to the filesystem lookup or the pack index search required anyway. (And if find_cached_object() needs to do more because of previous invocations to pretend_object_file(), all the more reason to be consistent in whether we present cached objects.) As a historical note, the function now known as repo_read_object_file() was taught the empty tree in 346245a1bb ("hard-code the empty tree object", 2008-02-13), and the function now known as oid_object_info() was taught the empty tree in c4d9986f5f ("sha1_object_info: examine cached_object store too", 2011-02-07). repo_has_object_file() was never updated, perhaps due to oversight. The flag OBJECT_INFO_SKIP_CACHED, introduced later in dfdd4afcf9 ("sha1_file: teach sha1_object_info_extended more flags", 2017-06-26) and used in e83e71c5e1 ("sha1_file: refactor has_sha1_file_with_flags", 2017-06-26), was introduced to preserve this difference in empty-tree handling, but now it can be removed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-02 21:16:30 +01:00
co = find_cached_object(real);
if (co) {
if (oi->typep)
*(oi->typep) = co->type;
if (oi->sizep)
*(oi->sizep) = co->size;
if (oi->disk_sizep)
*(oi->disk_sizep) = 0;
if (oi->delta_base_oid)
oidclr(oi->delta_base_oid);
sha1-file: remove OBJECT_INFO_SKIP_CACHED In a partial clone, if a user provides the hash of the empty tree ("git mktree </dev/null" - for SHA-1, this is 4b825d...) to a command which requires that that object be parsed, for example: git diff-tree 4b825d <a non-empty tree> then Git will lazily fetch the empty tree, unnecessarily, because parsing of that object invokes repo_has_object_file(), which does not special-case the empty tree. Instead, teach repo_has_object_file() to consult find_cached_object() (which handles the empty tree), thus bringing it in line with the rest of the object-store-accessing functions. A cost is that repo_has_object_file() will now need to oideq upon each invocation, but that is trivial compared to the filesystem lookup or the pack index search required anyway. (And if find_cached_object() needs to do more because of previous invocations to pretend_object_file(), all the more reason to be consistent in whether we present cached objects.) As a historical note, the function now known as repo_read_object_file() was taught the empty tree in 346245a1bb ("hard-code the empty tree object", 2008-02-13), and the function now known as oid_object_info() was taught the empty tree in c4d9986f5f ("sha1_object_info: examine cached_object store too", 2011-02-07). repo_has_object_file() was never updated, perhaps due to oversight. The flag OBJECT_INFO_SKIP_CACHED, introduced later in dfdd4afcf9 ("sha1_file: teach sha1_object_info_extended more flags", 2017-06-26) and used in e83e71c5e1 ("sha1_file: refactor has_sha1_file_with_flags", 2017-06-26), was introduced to preserve this difference in empty-tree handling, but now it can be removed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-02 21:16:30 +01:00
if (oi->type_name)
strbuf_addstr(oi->type_name, type_name(co->type));
if (oi->contentp)
*oi->contentp = xmemdupz(co->buf, co->size);
oi->whence = OI_CACHED;
return 0;
}
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
while (1) {
if (find_pack_entry(r, real, &e))
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
break;
if (flags & OBJECT_INFO_IGNORE_LOOSE)
return -1;
/* Most likely it's a loose object. */
if (!loose_object_info(r, real, oi, flags))
sha1_object_info_extended: make type calculation optional Each caller of sha1_object_info_extended sets up an object_info struct to tell the function which elements of the object it wants to get. Until now, getting the type of the object has always been required (and it is returned via the return type rather than a pointer in object_info). This can involve actually opening a loose object file to determine its type, or following delta chains to determine a packed file's base type. These effects produce a measurable slow-down when doing a "cat-file --batch-check" that does not include %(objecttype). This patch adds a "typep" query to struct object_info, so that it can be optionally queried just like size and disk_size. As a result, the return type of the function is no longer the object type, but rather 0/-1 for success/error. As there are only three callers total, we just fix up each caller rather than keep a compatibility wrapper: 1. The simpler sha1_object_info wrapper continues to always ask for and return the type field. 2. The istream_source function wants to know the type, and so always asks for it. 3. The cat-file batch code asks for the type only when %(objecttype) is part of the format string. On linux.git, the best-of-five for running: $ git rev-list --objects --all >objects $ time git cat-file --batch-check='%(objectsize:disk)' on a fully packed repository goes from: real 0m8.680s user 0m8.160s sys 0m0.512s to: real 0m7.205s user 0m6.580s sys 0m0.608s Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12 08:34:57 +02:00
return 0;
/* Not a loose object; someone else may have just packed it. */
if (!(flags & OBJECT_INFO_QUICK)) {
reprepare_packed_git(r);
if (find_pack_entry(r, real, &e))
break;
}
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
/*
* If r is the_repository, this might be an attempt at
* accessing a submodule object as if it were in the_repository
* (having called add_submodule_odb() on that submodule's ODB).
* If any such ODBs exist, register them and try again.
*/
if (r == the_repository &&
register_all_submodule_odb_as_alternates())
submodule: lazily add submodule ODBs as alternates Teach Git to add submodule ODBs as alternates to the object store of the_repository only upon the first access of an object not in the_repository, and not when add_submodule_odb() is called. This provides a means of gradually migrating from accessing a submodule's object through alternates to accessing a submodule's object by explicitly passing its repository object. Any Git command can declare that it might access submodule objects by calling add_submodule_odb() (as they do now), but the submodule ODBs themselves will not be added until needed, so individual commands and/or combinations of arguments can be migrated one by one. [The advantage of explicit repository-object passing is code clarity (it is clear which repository an object read is from), performance (there is no need to linearly search through all submodule ODBs whenever an object is accessed from any repository, whether superproject or submodule), and the possibility of future features like partial clone submodules (which right now is not possible because if an object is missing, we do not know which repository to lazy-fetch into).] This commit also introduces an environment variable that a test may set to make the actual registration of alternates fatal, in order to demonstrate that its codepaths do not need this registration. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Reviewed-by: Emily Shaffer <emilyshaffer@google.com> Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-16 23:09:51 +02:00
/* We added some alternates; retry */
continue;
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
/* Check if it is a missing object */
if (fetch_if_missing && repo_has_promisor_remote(r) &&
!already_retried &&
!(flags & OBJECT_INFO_SKIP_FETCH_OBJECT)) {
promisor_remote_get_direct(r, real, 1);
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
already_retried = 1;
continue;
}
sha1_file: support lazily fetching missing objects Teach sha1_file to fetch objects from the remote configured in extensions.partialclone whenever an object is requested but missing. The fetching of objects can be suppressed through a global variable. This is used by fsck and index-pack. However, by default, such fetching is not suppressed. This is meant as a temporary measure to ensure that all Git commands work in such a situation. Future patches will update some commands to either tolerate missing objects (without fetching them) or be more efficient in fetching them. In order to determine the code changes in sha1_file.c necessary, I investigated the following: (1) functions in sha1_file.c that take in a hash, without the user regarding how the object is stored (loose or packed) (2) functions in packfile.c (because I need to check callers that know about the loose/packed distinction and operate on both differently, and ensure that they can handle the concept of objects that are neither loose nor packed) (1) is handled by the modification to sha1_object_info_extended(). For (2), I looked at for_each_packed_object and others. For for_each_packed_object, the callers either already work or are fixed in this patch: - reachable - only to find recent objects - builtin/fsck - already knows about missing objects - builtin/cat-file - warning message added in this commit Callers of the other functions do not need to be changed: - parse_pack_index - http - indirectly from http_get_info_packs - find_pack_entry_one - this searches a single pack that is provided as an argument; the caller already knows (through other means) that the sought object is in a specific pack - find_sha1_pack - fast-import - appears to be an optimization to not store a file if it is already in a pack - http-walker - to search through a struct alt_base - http-push - to search through remote packs - has_sha1_pack - builtin/fsck - already knows about promisor objects - builtin/count-objects - informational purposes only (check if loose object is also packed) - builtin/prune-packed - check if object to be pruned is packed (if not, don't prune it) - revision - used to exclude packed objects if requested by user - diff - just for optimization Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-12-08 16:27:14 +01:00
return -1;
}
if (oi == &blank_oi)
/*
* We know that the caller doesn't actually need the
* information below, so return early.
*/
return 0;
rtype = packed_object_info(r, e.p, e.offset, oi);
if (rtype < 0) {
mark_bad_packed_object(e.p, real);
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
return do_oid_object_info_extended(r, real, oi, 0);
} else if (oi->whence == OI_PACKED) {
oi->u.packed.offset = e.offset;
oi->u.packed.pack = e.p;
oi->u.packed.is_delta = (rtype == OBJ_REF_DELTA ||
rtype == OBJ_OFS_DELTA);
}
sha1_object_info_extended: make type calculation optional Each caller of sha1_object_info_extended sets up an object_info struct to tell the function which elements of the object it wants to get. Until now, getting the type of the object has always been required (and it is returned via the return type rather than a pointer in object_info). This can involve actually opening a loose object file to determine its type, or following delta chains to determine a packed file's base type. These effects produce a measurable slow-down when doing a "cat-file --batch-check" that does not include %(objecttype). This patch adds a "typep" query to struct object_info, so that it can be optionally queried just like size and disk_size. As a result, the return type of the function is no longer the object type, but rather 0/-1 for success/error. As there are only three callers total, we just fix up each caller rather than keep a compatibility wrapper: 1. The simpler sha1_object_info wrapper continues to always ask for and return the type field. 2. The istream_source function wants to know the type, and so always asks for it. 3. The cat-file batch code asks for the type only when %(objecttype) is part of the format string. On linux.git, the best-of-five for running: $ git rev-list --objects --all >objects $ time git cat-file --batch-check='%(objectsize:disk)' on a fully packed repository goes from: real 0m8.680s user 0m8.160s sys 0m0.512s to: real 0m7.205s user 0m6.580s sys 0m0.608s Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12 08:34:57 +02:00
return 0;
}
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
int oid_object_info_extended(struct repository *r, const struct object_id *oid,
struct object_info *oi, unsigned flags)
{
int ret;
obj_read_lock();
ret = do_oid_object_info_extended(r, oid, oi, flags);
obj_read_unlock();
return ret;
}
/* returns enum object_type or negative */
int oid_object_info(struct repository *r,
const struct object_id *oid,
unsigned long *sizep)
{
sha1_object_info_extended: make type calculation optional Each caller of sha1_object_info_extended sets up an object_info struct to tell the function which elements of the object it wants to get. Until now, getting the type of the object has always been required (and it is returned via the return type rather than a pointer in object_info). This can involve actually opening a loose object file to determine its type, or following delta chains to determine a packed file's base type. These effects produce a measurable slow-down when doing a "cat-file --batch-check" that does not include %(objecttype). This patch adds a "typep" query to struct object_info, so that it can be optionally queried just like size and disk_size. As a result, the return type of the function is no longer the object type, but rather 0/-1 for success/error. As there are only three callers total, we just fix up each caller rather than keep a compatibility wrapper: 1. The simpler sha1_object_info wrapper continues to always ask for and return the type field. 2. The istream_source function wants to know the type, and so always asks for it. 3. The cat-file batch code asks for the type only when %(objecttype) is part of the format string. On linux.git, the best-of-five for running: $ git rev-list --objects --all >objects $ time git cat-file --batch-check='%(objectsize:disk)' on a fully packed repository goes from: real 0m8.680s user 0m8.160s sys 0m0.512s to: real 0m7.205s user 0m6.580s sys 0m0.608s Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12 08:34:57 +02:00
enum object_type type;
provide an initializer for "struct object_info" An all-zero initializer is fine for this struct, but because the first element is a pointer, call sites need to know to use "NULL" instead of "0". Otherwise some static checkers like "sparse" will complain; see d099b71 (Fix some sparse warnings, 2013-07-18) for example. So let's provide an initializer to make this easier to get right. But let's also comment that memset() to zero is explicitly OK[1]. One of the callers embeds object_info in another struct which is initialized via memset (expand_data in builtin/cat-file.c). Since our subset of C doesn't allow assignment from a compound literal, handling this in any other way is awkward, so we'd like to keep the ability to initialize by memset(). By documenting this property, it should make anybody who wants to change the initializer think twice before doing so. There's one other caller of interest. In parse_sha1_header(), we did not initialize the struct fully in the first place. This turned out not to be a bug because the sub-function it calls does not look at any other fields except the ones we did initialize. But that assumption might not hold in the future, so it's a dangerous construct. This patch switches it to initializing the whole struct, which protects us against unexpected reads of the other fields. [1] Obviously using memset() to initialize a pointer violates the C standard, but we long ago decided that it was an acceptable tradeoff in the real world. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-11 11:24:35 +02:00
struct object_info oi = OBJECT_INFO_INIT;
sha1_object_info_extended: make type calculation optional Each caller of sha1_object_info_extended sets up an object_info struct to tell the function which elements of the object it wants to get. Until now, getting the type of the object has always been required (and it is returned via the return type rather than a pointer in object_info). This can involve actually opening a loose object file to determine its type, or following delta chains to determine a packed file's base type. These effects produce a measurable slow-down when doing a "cat-file --batch-check" that does not include %(objecttype). This patch adds a "typep" query to struct object_info, so that it can be optionally queried just like size and disk_size. As a result, the return type of the function is no longer the object type, but rather 0/-1 for success/error. As there are only three callers total, we just fix up each caller rather than keep a compatibility wrapper: 1. The simpler sha1_object_info wrapper continues to always ask for and return the type field. 2. The istream_source function wants to know the type, and so always asks for it. 3. The cat-file batch code asks for the type only when %(objecttype) is part of the format string. On linux.git, the best-of-five for running: $ git rev-list --objects --all >objects $ time git cat-file --batch-check='%(objectsize:disk)' on a fully packed repository goes from: real 0m8.680s user 0m8.160s sys 0m0.512s to: real 0m7.205s user 0m6.580s sys 0m0.608s Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12 08:34:57 +02:00
oi.typep = &type;
oi.sizep = sizep;
if (oid_object_info_extended(r, oid, &oi,
OBJECT_INFO_LOOKUP_REPLACE) < 0)
sha1_object_info_extended: make type calculation optional Each caller of sha1_object_info_extended sets up an object_info struct to tell the function which elements of the object it wants to get. Until now, getting the type of the object has always been required (and it is returned via the return type rather than a pointer in object_info). This can involve actually opening a loose object file to determine its type, or following delta chains to determine a packed file's base type. These effects produce a measurable slow-down when doing a "cat-file --batch-check" that does not include %(objecttype). This patch adds a "typep" query to struct object_info, so that it can be optionally queried just like size and disk_size. As a result, the return type of the function is no longer the object type, but rather 0/-1 for success/error. As there are only three callers total, we just fix up each caller rather than keep a compatibility wrapper: 1. The simpler sha1_object_info wrapper continues to always ask for and return the type field. 2. The istream_source function wants to know the type, and so always asks for it. 3. The cat-file batch code asks for the type only when %(objecttype) is part of the format string. On linux.git, the best-of-five for running: $ git rev-list --objects --all >objects $ time git cat-file --batch-check='%(objectsize:disk)' on a fully packed repository goes from: real 0m8.680s user 0m8.160s sys 0m0.512s to: real 0m7.205s user 0m6.580s sys 0m0.608s Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-12 08:34:57 +02:00
return -1;
return type;
}
static void *read_object(struct repository *r,
const struct object_id *oid, enum object_type *type,
unsigned long *size)
{
struct object_info oi = OBJECT_INFO_INIT;
void *content;
oi.typep = type;
oi.sizep = size;
oi.contentp = &content;
if (oid_object_info_extended(r, oid, &oi, 0) < 0)
return NULL;
return content;
}
int pretend_object_file(void *buf, unsigned long len, enum object_type type,
struct object_id *oid)
{
struct cached_object *co;
hash_object_file(the_hash_algo, buf, len, type, oid);
if (has_object_file_with_flags(oid, OBJECT_INFO_QUICK | OBJECT_INFO_SKIP_FETCH_OBJECT) ||
find_cached_object(oid))
return 0;
ALLOC_GROW(cached_objects, cached_object_nr + 1, cached_object_alloc);
co = &cached_objects[cached_object_nr++];
co->size = len;
co->type = type;
co->buf = xmalloc(len);
memcpy(co->buf, buf, len);
oidcpy(&co->oid, oid);
return 0;
}
/*
* This function dies on corrupt objects; the callers who want to
* deal with them should arrange to call read_object() and give error
* messages themselves.
*/
void *read_object_file_extended(struct repository *r,
const struct object_id *oid,
enum object_type *type,
unsigned long *size,
int lookup_replace)
{
void *data;
const struct packed_git *p;
const char *path;
struct stat st;
const struct object_id *repl = lookup_replace ?
lookup_replace_object(r, oid) : oid;
errno = 0;
data = read_object(r, repl, type, size);
if (data)
return data;
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
obj_read_lock();
if (errno && errno != ENOENT)
die_errno(_("failed to read object %s"), oid_to_hex(oid));
/* die if we replaced an object with one that does not exist */
if (repl != oid)
die(_("replacement %s not found for %s"),
oid_to_hex(repl), oid_to_hex(oid));
if (!stat_loose_object(r, repl, &st, &path))
die(_("loose object %s (stored in %s) is corrupt"),
oid_to_hex(repl), path);
if ((p = has_packed_and_bad(r, repl)))
die(_("packed object %s (stored in %s) is corrupt"),
oid_to_hex(repl), p->pack_name);
object-store: allow threaded access to object reading Allow object reading to be performed by multiple threads protecting it with an internal lock, the obj_read_mutex. The lock usage can be toggled with enable_obj_read_lock() and disable_obj_read_lock(). Currently, the functions which can be safely called in parallel are: read_object_file_extended(), repo_read_object_file(), read_object_file(), read_object_with_reference(), read_object(), oid_object_info() and oid_object_info_extended(). It's also possible to use obj_read_lock() and obj_read_unlock() to protect other sections that cannot execute in parallel with object reading. Probably there are many spots in the functions listed above that could be executed unlocked (and thus, in parallel). But, for now, we are most interested in allowing parallel access to zlib inflation. This is one of the sections where object reading spends most of the time in (e.g. up to one-third of git-grep's execution time in the chromium repo corresponds to inflation) and it's already thread-safe. So, to take advantage of that, the obj_read_mutex is released when calling git_inflate() and re-acquired right after, for every calling spot in oid_object_info_extended()'s call chain. We may refine this lock to also exploit other possible parallel spots in the future, but for now, threaded zlib inflation should already give great speedups for threaded object reading callers. Note that add_delta_base_cache() was also modified to skip adding already present entries to the cache. This wasn't possible before, but it would be now, with the parallel inflation. Take for example the following situation, where two threads - A and B - are executing the code at unpack_entry(): 1. Thread A is performing the decompression of a base O (which is not yet in the cache) at PHASE II. Thread B is simultaneously trying to unpack O, but just starting at PHASE I. 2. Since O is not yet in the cache, B will go to PHASE II to also perform the decompression. 3. When they finish decompressing, one of them will get the object reading mutex and go to PHASE III while the other waits for the mutex. Let’s say A got the mutex first. 4. Thread A will add O to the cache, go throughout the rest of PHASE III and return. 5. Thread B gets the mutex, also add O to the cache (if the check wasn't there) and returns. Finally, it is also important to highlight that the object reading lock can only ensure thread-safety in the mentioned functions thanks to two complementary mechanisms: the use of 'struct raw_object_store's replace_mutex, which guards sections in the object reading machinery that would otherwise be thread-unsafe; and the 'struct pack_window's inuse_cnt, which protects window reading operations (such as the one performed during the inflation of a packed object), allowing them to execute without the acquisition of the obj_read_mutex. Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-16 03:39:53 +01:00
obj_read_unlock();
return NULL;
}
void *read_object_with_reference(struct repository *r,
const struct object_id *oid,
enum object_type required_type,
unsigned long *size,
struct object_id *actual_oid_return)
{
enum object_type type;
void *buffer;
unsigned long isize;
struct object_id actual_oid;
oidcpy(&actual_oid, oid);
while (1) {
int ref_length = -1;
const char *ref_type = NULL;
buffer = repo_read_object_file(r, &actual_oid, &type, &isize);
if (!buffer)
return NULL;
if (type == required_type) {
*size = isize;
if (actual_oid_return)
oidcpy(actual_oid_return, &actual_oid);
return buffer;
}
/* Handle references */
else if (type == OBJ_COMMIT)
ref_type = "tree ";
else if (type == OBJ_TAG)
ref_type = "object ";
else {
free(buffer);
return NULL;
}
ref_length = strlen(ref_type);
if (ref_length + the_hash_algo->hexsz > isize ||
memcmp(buffer, ref_type, ref_length) ||
get_oid_hex((char *) buffer + ref_length, &actual_oid)) {
free(buffer);
return NULL;
}
free(buffer);
/* Now we have the ID of the referred-to object in
* actual_oid. Check again. */
}
}
static void hash_object_body(const struct git_hash_algo *algo, git_hash_ctx *c,
const void *buf, unsigned long len,
struct object_id *oid,
char *hdr, int *hdrlen)
{
algo->init_fn(c);
algo->update_fn(c, hdr, *hdrlen);
algo->update_fn(c, buf, len);
algo->final_oid_fn(oid, c);
}
static void write_object_file_prepare(const struct git_hash_algo *algo,
const void *buf, unsigned long len,
enum object_type type, struct object_id *oid,
char *hdr, int *hdrlen)
{
git_hash_ctx c;
/* Generate the header */
*hdrlen = format_object_header(hdr, *hdrlen, type, len);
/* Sha1.. */
hash_object_body(algo, &c, buf, len, oid, hdr, hdrlen);
}
static void write_object_file_prepare_literally(const struct git_hash_algo *algo,
const void *buf, unsigned long len,
const char *type, struct object_id *oid,
char *hdr, int *hdrlen)
{
git_hash_ctx c;
*hdrlen = format_object_header_literally(hdr, *hdrlen, type, len);
hash_object_body(algo, &c, buf, len, oid, hdr, hdrlen);
}
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
/*
* Move the just written object into its final resting place.
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
*/
int finalize_object_file(const char *tmpfile, const char *filename)
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
{
int ret = 0;
if (object_creation_mode == OBJECT_CREATION_USES_RENAMES)
goto try_rename;
else if (link(tmpfile, filename))
ret = errno;
/*
* Coda hack - coda doesn't like cross-directory links,
* so we fall back to a rename, which will mean that it
* won't be able to check collisions, but that's not a
* big deal.
*
* The same holds for FAT formatted media.
*
* When this succeeds, we just return. We have nothing
* left to unlink.
*/
if (ret && ret != EEXIST) {
try_rename:
if (!rename(tmpfile, filename))
goto out;
ret = errno;
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
}
unlink_or_warn(tmpfile);
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
if (ret) {
if (ret != EEXIST) {
return error_errno(_("unable to write file %s"), filename);
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
}
/* FIXME!!! Collision check here ? */
}
out:
if (adjust_shared_perm(filename))
return error(_("unable to set permission to '%s'"), filename);
Create object subdirectories on demand This makes it possible to have a "sparse" git object subdirectory structure, something that has become much more attractive now that people use pack-files all the time. As a result of pack-files, a git object directory doesn't necessarily have any individual objects lying around, and in that case it's just wasting space to keep the empty first-level object directories around: on many filesystems the 256 empty directories will be aboue 1MB of diskspace. Even more importantly, after you re-pack a project that _used_ to be unpacked, you could be left with huge directories that no longer contain anything, but that waste space and take time to look through. With this change, "git prune-packed" can just do an rmdir() on the directories, and they'll get removed if empty, and re-created on demand. This patch also tries to fix up "write_sha1_from_fd()" to use the new common infrastructure for creating the object files, closing a hole where we might otherwise leave half-written objects in the object database. [jc: I unoptimized the part that really removes the fan-out directories to ease transition. init-db still wastes 1MB of diskspace to hold 256 empty fan-outs, and prune-packed rmdir()'s the grown but empty directories, but runs mkdir() immediately after that -- reducing the saving from 150KB to 146KB. These parts will be re-introduced when everybody has the on-demand capability.] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-10-09 00:54:01 +02:00
return 0;
}
static int write_buffer(int fd, const void *buf, size_t len)
{
if (write_in_full(fd, buf, len) < 0)
return error_errno(_("file write error"));
return 0;
}
static void hash_object_file_literally(const struct git_hash_algo *algo,
const void *buf, unsigned long len,
const char *type, struct object_id *oid)
{
char hdr[MAX_HEADER_LEN];
int hdrlen = sizeof(hdr);
write_object_file_prepare_literally(algo, buf, len, type, oid, hdr, &hdrlen);
}
void hash_object_file(const struct git_hash_algo *algo, const void *buf,
unsigned long len, enum object_type type,
struct object_id *oid)
{
hash_object_file_literally(algo, buf, len, type_name(type), oid);
}
/* Finalize a file on disk, and close it. */
static void close_loose_object(int fd, const char *filename)
{
if (the_repository->objects->odb->will_destroy)
goto out;
core.fsyncmethod: batched disk flushes for loose-objects When adding many objects to a repo with `core.fsync=loose-object`, the cost of fsync'ing each object file can become prohibitive. One major source of the cost of fsync is the implied flush of the hardware writeback cache within the disk drive. This commit introduces a new `core.fsyncMethod=batch` option that batches up hardware flushes. It hooks into the bulk-checkin odb-transaction functionality, takes advantage of tmp-objdir, and uses the writeout-only support code. When the new mode is enabled, we do the following for each new object: 1a. Create the object in a tmp-objdir. 2a. Issue a pagecache writeback request and wait for it to complete. At the end of the entire transaction when unplugging bulk checkin: 1b. Issue an fsync against a dummy file to flush the log and hardware writeback cache, which should by now have seen the tmp-objdir writes. 2b. Rename all of the tmp-objdir files to their final names. 3b. When updating the index and/or refs, we assume that Git will issue another fsync internal to that operation. This is not the default today, but the user now has the option of syncing the index and there is a separate patch series to implement syncing of refs. On a filesystem with a singular journal that is updated during name operations (e.g. create, link, rename, etc), such as NTFS, HFS+, or XFS we would expect the fsync to trigger a journal writeout so that this sequence is enough to ensure that the user's data is durable by the time the git command returns. This sequence also ensures that no object files appear in the main object store unless they are fsync-durable. Batch mode is only enabled if core.fsync includes loose-objects. If the legacy core.fsyncObjectFiles setting is enabled, but core.fsync does not include loose-objects, we will use file-by-file fsyncing. In step (1a) of the sequence, the tmp-objdir is created lazily to avoid work if no loose objects are ever added to the ODB. We use a tmp-objdir to maintain the invariant that no loose-objects are visible in the main ODB unless they are properly fsync-durable. This is important since future ODB operations that try to create an object with specific contents will silently drop the new data if an object with the target hash exists without checking that the loose-object contents match the hash. Only a full git-fsck would restore the ODB to a functional state where dataloss doesn't occur. In step (1b) of the sequence, we issue a fsync against a dummy file created specifically for the purpose. This method has a little higher cost than using one of the input object files, but makes adding new callers of this mechanism easier, since we don't need to figure out which object file is "last" or risk sharing violations by caching the fd of the last object file. _Performance numbers_: Linux - Hyper-V VM running Kernel 5.11 (Ubuntu 20.04) on a fast SSD. Mac - macOS 11.5.1 running on a Mac mini on a 1TB Apple SSD. Windows - Same host as Linux, a preview version of Windows 11. Adding 500 files to the repo with 'git add' Times reported in seconds. object file syncing | Linux | Mac | Windows --------------------|-------|-------|-------- disabled | 0.06 | 0.35 | 0.61 fsync | 1.88 | 11.18 | 2.47 batch | 0.15 | 0.41 | 1.53 Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-04-05 07:20:09 +02:00
if (batch_fsync_enabled(FSYNC_COMPONENT_LOOSE_OBJECT))
fsync_loose_object_bulk_checkin(fd, filename);
core.fsyncmethod: batched disk flushes for loose-objects When adding many objects to a repo with `core.fsync=loose-object`, the cost of fsync'ing each object file can become prohibitive. One major source of the cost of fsync is the implied flush of the hardware writeback cache within the disk drive. This commit introduces a new `core.fsyncMethod=batch` option that batches up hardware flushes. It hooks into the bulk-checkin odb-transaction functionality, takes advantage of tmp-objdir, and uses the writeout-only support code. When the new mode is enabled, we do the following for each new object: 1a. Create the object in a tmp-objdir. 2a. Issue a pagecache writeback request and wait for it to complete. At the end of the entire transaction when unplugging bulk checkin: 1b. Issue an fsync against a dummy file to flush the log and hardware writeback cache, which should by now have seen the tmp-objdir writes. 2b. Rename all of the tmp-objdir files to their final names. 3b. When updating the index and/or refs, we assume that Git will issue another fsync internal to that operation. This is not the default today, but the user now has the option of syncing the index and there is a separate patch series to implement syncing of refs. On a filesystem with a singular journal that is updated during name operations (e.g. create, link, rename, etc), such as NTFS, HFS+, or XFS we would expect the fsync to trigger a journal writeout so that this sequence is enough to ensure that the user's data is durable by the time the git command returns. This sequence also ensures that no object files appear in the main object store unless they are fsync-durable. Batch mode is only enabled if core.fsync includes loose-objects. If the legacy core.fsyncObjectFiles setting is enabled, but core.fsync does not include loose-objects, we will use file-by-file fsyncing. In step (1a) of the sequence, the tmp-objdir is created lazily to avoid work if no loose objects are ever added to the ODB. We use a tmp-objdir to maintain the invariant that no loose-objects are visible in the main ODB unless they are properly fsync-durable. This is important since future ODB operations that try to create an object with specific contents will silently drop the new data if an object with the target hash exists without checking that the loose-object contents match the hash. Only a full git-fsck would restore the ODB to a functional state where dataloss doesn't occur. In step (1b) of the sequence, we issue a fsync against a dummy file created specifically for the purpose. This method has a little higher cost than using one of the input object files, but makes adding new callers of this mechanism easier, since we don't need to figure out which object file is "last" or risk sharing violations by caching the fd of the last object file. _Performance numbers_: Linux - Hyper-V VM running Kernel 5.11 (Ubuntu 20.04) on a fast SSD. Mac - macOS 11.5.1 running on a Mac mini on a 1TB Apple SSD. Windows - Same host as Linux, a preview version of Windows 11. Adding 500 files to the repo with 'git add' Times reported in seconds. object file syncing | Linux | Mac | Windows --------------------|-------|-------|-------- disabled | 0.06 | 0.35 | 0.61 fsync | 1.88 | 11.18 | 2.47 batch | 0.15 | 0.41 | 1.53 Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-04-05 07:20:09 +02:00
else if (fsync_object_files > 0)
fsync_or_die(fd, filename);
else
fsync_component_or_die(FSYNC_COMPONENT_LOOSE_OBJECT, fd,
filename);
out:
if (close(fd) != 0)
die_errno(_("error when closing loose object file"));
}
/* Size of directory component, including the ending '/' */
static inline int directory_size(const char *filename)
{
const char *s = strrchr(filename, '/');
if (!s)
return 0;
return s - filename + 1;
}
/*
* This creates a temporary file in the same directory as the final
* 'filename'
*
* We want to avoid cross-directory filename renames, because those
* can have problems on various filesystems (FAT, NFS, Coda).
*/
static int create_tmpfile(struct strbuf *tmp, const char *filename)
{
int fd, dirlen = directory_size(filename);
strbuf_reset(tmp);
strbuf_add(tmp, filename, dirlen);
strbuf_addstr(tmp, "tmp_obj_XXXXXX");
fd = git_mkstemp_mode(tmp->buf, 0444);
if (fd < 0 && dirlen && errno == ENOENT) {
/*
* Make sure the directory exists; note that the contents
* of the buffer are undefined after mkstemp returns an
* error, so we have to rewrite the whole buffer from
* scratch.
*/
strbuf_reset(tmp);
strbuf_add(tmp, filename, dirlen - 1);
if (mkdir(tmp->buf, 0777) && errno != EEXIST)
sha1_file.c:create_tmpfile(): Fix race when creating loose object dirs There are cases (e.g. when running concurrent fetches in a repo) where multiple Git processes concurrently attempt to create loose objects within the same objects/XX/ dir. The creation of the loose object files is (AFAICS) safe from races, but the creation of the objects/XX/ dir in which the loose objects reside is unsafe, for example: Two concurrent fetches - A and B. As part of its fetch, A needs to store 12aaaaa as a loose object. B, on the other hand, needs to store 12bbbbb as a loose object. The objects/12 directory does not already exist. Concurrently, both A and B determine that they need to create the objects/12 directory (because their first call to git_mkstemp_mode() within create_tmpfile() fails witn ENOENT). One of them - let's say A - executes the following mkdir() call before the other. This first call returns success, and A moves on. When B gets around to calling mkdir(), it fails with EEXIST, because A won the race. The mkdir() error causes B to return -1 from create_tmpfile(), which propagates all the way, resulting in the fetch failing with: error: unable to create temporary file: File exists fatal: failed to write object fatal: unpack-objects failed Although it's hard to add a testcase reproducing this issue, it's easy to provoke if we insert a sleep after the if (mkdir(buffer, 0777) || adjust_shared_perm(buffer)) return -1; block, and then run two concurrent "git fetch"es against the same repo. The fix is to simply handle mkdir() failing with EEXIST as a success. If EEXIST is somehow returned for the wrong reasons (because the relevant objects/XX is not a directory, or is otherwise unsuitable for object storage), the following call to adjust_shared_perm(), or ultimately the retried call to git_mkstemp_mode() will fail, and we end up returning error from create_tmpfile() in any case. Note that there are still cases where two users with unsuitable umasks in a shared repo can end up in two races where one user first wins the mkdir() race to create an objects/XX/ directory, and then the other user wins the adjust_shared_perms() race to chmod() that directory, but fails because it is (transiently, until the first users completes its chmod()) unwriteable to the other user. However, (an equivalent of) this race also exists before this patch, and is made no worse by this patch. Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-27 12:35:43 +01:00
return -1;
if (adjust_shared_perm(tmp->buf))
return -1;
/* Try again */
strbuf_addstr(tmp, "/tmp_obj_XXXXXX");
fd = git_mkstemp_mode(tmp->buf, 0444);
}
return fd;
}
/**
* Common steps for loose object writers to start writing loose
* objects:
*
* - Create tmpfile for the loose object.
* - Setup zlib stream for compression.
* - Start to feed header to zlib stream.
*
* Returns a "fd", which should later be provided to
* end_loose_object_common().
*/
static int start_loose_object_common(struct strbuf *tmp_file,
const char *filename, unsigned flags,
git_zstream *stream,
unsigned char *buf, size_t buflen,
git_hash_ctx *c,
char *hdr, int hdrlen)
{
int fd;
fd = create_tmpfile(tmp_file, filename);
if (fd < 0) {
if (flags & HASH_SILENT)
return -1;
else if (errno == EACCES)
return error(_("insufficient permission for adding "
"an object to repository database %s"),
get_object_directory());
else
return error_errno(
_("unable to create temporary file"));
}
/* Setup zlib stream for compression */
git_deflate_init(stream, zlib_compression_level);
stream->next_out = buf;
stream->avail_out = buflen;
the_hash_algo->init_fn(c);
/* Start to feed header to zlib stream */
stream->next_in = (unsigned char *)hdr;
stream->avail_in = hdrlen;
while (git_deflate(stream, 0) == Z_OK)
; /* nothing */
the_hash_algo->update_fn(c, hdr, hdrlen);
return fd;
}
/**
* Common steps for the inner git_deflate() loop for writing loose
* objects. Returns what git_deflate() returns.
*/
static int write_loose_object_common(git_hash_ctx *c,
git_zstream *stream, const int flush,
unsigned char *in0, const int fd,
unsigned char *compressed,
const size_t compressed_len)
{
int ret;
ret = git_deflate(stream, flush ? Z_FINISH : 0);
the_hash_algo->update_fn(c, in0, stream->next_in - in0);
if (write_buffer(fd, compressed, stream->next_out - compressed) < 0)
die(_("unable to write loose object file"));
stream->next_out = compressed;
stream->avail_out = compressed_len;
return ret;
}
/**
* Common steps for loose object writers to end writing loose objects:
*
* - End the compression of zlib stream.
* - Get the calculated oid to "oid".
*/
static int end_loose_object_common(git_hash_ctx *c, git_zstream *stream,
struct object_id *oid)
{
int ret;
ret = git_deflate_end_gently(stream);
if (ret != Z_OK)
return ret;
the_hash_algo->final_oid_fn(oid, c);
return Z_OK;
}
static int write_loose_object(const struct object_id *oid, char *hdr,
int hdrlen, const void *buf, unsigned long len,
time_t mtime, unsigned flags)
{
int fd, ret;
unsigned char compressed[4096];
2011-06-10 20:52:15 +02:00
git_zstream stream;
git_hash_ctx c;
struct object_id parano_oid;
static struct strbuf tmp_file = STRBUF_INIT;
static struct strbuf filename = STRBUF_INIT;
core.fsyncmethod: batched disk flushes for loose-objects When adding many objects to a repo with `core.fsync=loose-object`, the cost of fsync'ing each object file can become prohibitive. One major source of the cost of fsync is the implied flush of the hardware writeback cache within the disk drive. This commit introduces a new `core.fsyncMethod=batch` option that batches up hardware flushes. It hooks into the bulk-checkin odb-transaction functionality, takes advantage of tmp-objdir, and uses the writeout-only support code. When the new mode is enabled, we do the following for each new object: 1a. Create the object in a tmp-objdir. 2a. Issue a pagecache writeback request and wait for it to complete. At the end of the entire transaction when unplugging bulk checkin: 1b. Issue an fsync against a dummy file to flush the log and hardware writeback cache, which should by now have seen the tmp-objdir writes. 2b. Rename all of the tmp-objdir files to their final names. 3b. When updating the index and/or refs, we assume that Git will issue another fsync internal to that operation. This is not the default today, but the user now has the option of syncing the index and there is a separate patch series to implement syncing of refs. On a filesystem with a singular journal that is updated during name operations (e.g. create, link, rename, etc), such as NTFS, HFS+, or XFS we would expect the fsync to trigger a journal writeout so that this sequence is enough to ensure that the user's data is durable by the time the git command returns. This sequence also ensures that no object files appear in the main object store unless they are fsync-durable. Batch mode is only enabled if core.fsync includes loose-objects. If the legacy core.fsyncObjectFiles setting is enabled, but core.fsync does not include loose-objects, we will use file-by-file fsyncing. In step (1a) of the sequence, the tmp-objdir is created lazily to avoid work if no loose objects are ever added to the ODB. We use a tmp-objdir to maintain the invariant that no loose-objects are visible in the main ODB unless they are properly fsync-durable. This is important since future ODB operations that try to create an object with specific contents will silently drop the new data if an object with the target hash exists without checking that the loose-object contents match the hash. Only a full git-fsck would restore the ODB to a functional state where dataloss doesn't occur. In step (1b) of the sequence, we issue a fsync against a dummy file created specifically for the purpose. This method has a little higher cost than using one of the input object files, but makes adding new callers of this mechanism easier, since we don't need to figure out which object file is "last" or risk sharing violations by caching the fd of the last object file. _Performance numbers_: Linux - Hyper-V VM running Kernel 5.11 (Ubuntu 20.04) on a fast SSD. Mac - macOS 11.5.1 running on a Mac mini on a 1TB Apple SSD. Windows - Same host as Linux, a preview version of Windows 11. Adding 500 files to the repo with 'git add' Times reported in seconds. object file syncing | Linux | Mac | Windows --------------------|-------|-------|-------- disabled | 0.06 | 0.35 | 0.61 fsync | 1.88 | 11.18 | 2.47 batch | 0.15 | 0.41 | 1.53 Signed-off-by: Neeraj Singh <neerajsi@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-04-05 07:20:09 +02:00
if (batch_fsync_enabled(FSYNC_COMPONENT_LOOSE_OBJECT))
prepare_loose_object_bulk_checkin();
loose_object_path(the_repository, &filename, oid);
fd = start_loose_object_common(&tmp_file, filename.buf, flags,
&stream, compressed, sizeof(compressed),
&c, hdr, hdrlen);
if (fd < 0)
return -1;
/* Then the data itself.. */
stream.next_in = (void *)buf;
stream.avail_in = len;
do {
sha1_file: be paranoid when creating loose objects We don't want the data being deflated and stored into loose objects to be different from what we expect. While the deflated data is protected by a CRC which is good enough for safe data retrieval operations, we still want to be doubly sure that the source data used at object creation time is still what we expected once that data has been deflated and its CRC32 computed. The most plausible data corruption may occur if the source file is modified while Git is deflating and writing it out in a loose object. Or Git itself could have a bug causing memory corruption. Or even bad RAM could cause trouble. So it is best to make sure everything is coherent and checksum protected from beginning to end. To do so we compute the SHA1 of the data being deflated _after_ the deflate operation has consumed that data, and make sure it matches with the expected SHA1. This way we can rely on the CRC32 checked by the inflate operation to provide a good indication that the data is still coherent with its SHA1 hash. One pathological case we ignore is when the data is modified before (or during) deflate call, but changed back before it is hashed. There is some overhead of course. Using 'git add' on a set of large files: Before: real 0m25.210s user 0m23.783s sys 0m1.408s After: real 0m26.537s user 0m25.175s sys 0m1.358s The overhead is around 5% for full data coherency guarantee. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-21 21:48:06 +01:00
unsigned char *in0 = stream.next_in;
ret = write_loose_object_common(&c, &stream, 1, in0, fd,
compressed, sizeof(compressed));
} while (ret == Z_OK);
if (ret != Z_STREAM_END)
die(_("unable to deflate new object %s (%d)"), oid_to_hex(oid),
ret);
ret = end_loose_object_common(&c, &stream, &parano_oid);
if (ret != Z_OK)
die(_("deflateEnd on object %s failed (%d)"), oid_to_hex(oid),
ret);
if (!oideq(oid, &parano_oid))
die(_("confused by unstable object source data for %s"),
oid_to_hex(oid));
close_loose_object(fd, tmp_file.buf);
if (mtime) {
struct utimbuf utb;
utb.actime = mtime;
utb.modtime = mtime;
if (utime(tmp_file.buf, &utb) < 0 &&
!(flags & HASH_SILENT))
warning_errno(_("failed utime() on %s"), tmp_file.buf);
}
return finalize_object_file(tmp_file.buf, filename.buf);
}
static int freshen_loose_object(const struct object_id *oid)
{
return check_and_freshen(oid, 1);
}
static int freshen_packed_object(const struct object_id *oid)
{
struct pack_entry e;
if (!find_pack_entry(the_repository, oid, &e))
return 0;
if (e.p->is_cruft)
return 0;
if (e.p->freshened)
return 1;
if (!freshen_file(e.p->pack_name))
return 0;
e.p->freshened = 1;
return 1;
}
object-file.c: add "stream_loose_object()" to handle large object If we want unpack and write a loose object using "write_loose_object", we have to feed it with a buffer with the same size of the object, which will consume lots of memory and may cause OOM. This can be improved by feeding data to "stream_loose_object()" in a stream. Add a new function "stream_loose_object()", which is a stream version of "write_loose_object()" but with a low memory footprint. We will use this function to unpack large blob object in later commit. Another difference with "write_loose_object()" is that we have no chance to run "write_object_file_prepare()" to calculate the oid in advance. In "write_loose_object()", we know the oid and we can write the temporary file in the same directory as the final object, but for an object with an undetermined oid, we don't know the exact directory for the object. Still, we need to save the temporary file we're preparing somewhere. We'll do that in the top-level ".git/objects/" directory (or whatever "GIT_OBJECT_DIRECTORY" is set to). Once we've streamed it we'll know the OID, and will move it to its canonical path. "freshen_packed_object()" or "freshen_loose_object()" will be called inside "stream_loose_object()" after obtaining the "oid". After the temporary file is written, we wants to mark the object to recent and we may find that where indeed is already the object. We should remove the temporary and do not leave a new copy of the object. Helped-by: René Scharfe <l.s.r@web.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Han Xin <chiyutianyi@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-06-11 04:44:19 +02:00
int stream_loose_object(struct input_stream *in_stream, size_t len,
struct object_id *oid)
{
int fd, ret, err = 0, flush = 0;
unsigned char compressed[4096];
git_zstream stream;
git_hash_ctx c;
struct strbuf tmp_file = STRBUF_INIT;
struct strbuf filename = STRBUF_INIT;
int dirlen;
char hdr[MAX_HEADER_LEN];
int hdrlen;
if (batch_fsync_enabled(FSYNC_COMPONENT_LOOSE_OBJECT))
prepare_loose_object_bulk_checkin();
/* Since oid is not determined, save tmp file to odb path. */
strbuf_addf(&filename, "%s/", get_object_directory());
hdrlen = format_object_header(hdr, sizeof(hdr), OBJ_BLOB, len);
/*
* Common steps for write_loose_object and stream_loose_object to
* start writing loose objects:
*
* - Create tmpfile for the loose object.
* - Setup zlib stream for compression.
* - Start to feed header to zlib stream.
*/
fd = start_loose_object_common(&tmp_file, filename.buf, 0,
&stream, compressed, sizeof(compressed),
&c, hdr, hdrlen);
if (fd < 0) {
err = -1;
goto cleanup;
}
/* Then the data itself.. */
do {
unsigned char *in0 = stream.next_in;
if (!stream.avail_in && !in_stream->is_finished) {
const void *in = in_stream->read(in_stream, &stream.avail_in);
stream.next_in = (void *)in;
in0 = (unsigned char *)in;
/* All data has been read. */
if (in_stream->is_finished)
flush = 1;
}
ret = write_loose_object_common(&c, &stream, flush, in0, fd,
compressed, sizeof(compressed));
/*
* Unlike write_loose_object(), we do not have the entire
* buffer. If we get Z_BUF_ERROR due to too few input bytes,
* then we'll replenish them in the next input_stream->read()
* call when we loop.
*/
} while (ret == Z_OK || ret == Z_BUF_ERROR);
if (stream.total_in != len + hdrlen)
die(_("write stream object %ld != %"PRIuMAX), stream.total_in,
(uintmax_t)len + hdrlen);
/*
* Common steps for write_loose_object and stream_loose_object to
* end writing loose oject:
*
* - End the compression of zlib stream.
* - Get the calculated oid.
*/
if (ret != Z_STREAM_END)
die(_("unable to stream deflate new object (%d)"), ret);
ret = end_loose_object_common(&c, &stream, oid);
if (ret != Z_OK)
die(_("deflateEnd on stream object failed (%d)"), ret);
close_loose_object(fd, tmp_file.buf);
if (freshen_packed_object(oid) || freshen_loose_object(oid)) {
unlink_or_warn(tmp_file.buf);
goto cleanup;
}
loose_object_path(the_repository, &filename, oid);
/* We finally know the object path, and create the missing dir. */
dirlen = directory_size(filename.buf);
if (dirlen) {
struct strbuf dir = STRBUF_INIT;
strbuf_add(&dir, filename.buf, dirlen);
if (mkdir_in_gitdir(dir.buf) && errno != EEXIST) {
err = error_errno(_("unable to create directory %s"), dir.buf);
strbuf_release(&dir);
goto cleanup;
}
strbuf_release(&dir);
}
err = finalize_object_file(tmp_file.buf, filename.buf);
cleanup:
strbuf_release(&tmp_file);
strbuf_release(&filename);
return err;
}
int write_object_file_flags(const void *buf, unsigned long len,
enum object_type type, struct object_id *oid,
unsigned flags)
{
char hdr[MAX_HEADER_LEN];
int hdrlen = sizeof(hdr);
/* Normally if we have it in the pack then we do not bother writing
* it out into .git/objects/??/?{38} file.
*/
write_object_file_prepare(the_hash_algo, buf, len, type, oid, hdr,
&hdrlen);
if (freshen_packed_object(oid) || freshen_loose_object(oid))
return 0;
return write_loose_object(oid, hdr, hdrlen, buf, len, 0, flags);
}
int write_object_file_literally(const void *buf, unsigned long len,
const char *type, struct object_id *oid,
unsigned flags)
{
char *header;
int hdrlen, status = 0;
/* type string, SP, %lu of the length plus NUL must fit this */
hdrlen = strlen(type) + MAX_HEADER_LEN;
header = xmalloc(hdrlen);
write_object_file_prepare_literally(the_hash_algo, buf, len, type,
oid, header, &hdrlen);
if (!(flags & HASH_WRITE_OBJECT))
goto cleanup;
if (freshen_packed_object(oid) || freshen_loose_object(oid))
goto cleanup;
status = write_loose_object(oid, header, hdrlen, buf, len, 0, 0);
cleanup:
free(header);
return status;
}
int force_object_loose(const struct object_id *oid, time_t mtime)
{
void *buf;
unsigned long len;
enum object_type type;
char hdr[MAX_HEADER_LEN];
int hdrlen;
int ret;
if (has_loose_object(oid))
return 0;
buf = read_object(the_repository, oid, &type, &len);
if (!buf)
return error(_("cannot read object for %s"), oid_to_hex(oid));
hdrlen = format_object_header(hdr, sizeof(hdr), type, len);
ret = write_loose_object(oid, hdr, hdrlen, buf, len, mtime, 0);
free(buf);
return ret;
}
int has_object(struct repository *r, const struct object_id *oid,
unsigned flags)
{
int quick = !(flags & HAS_OBJECT_RECHECK_PACKED);
unsigned object_info_flags = OBJECT_INFO_SKIP_FETCH_OBJECT |
(quick ? OBJECT_INFO_QUICK : 0);
if (!startup_info->have_repository)
return 0;
return oid_object_info_extended(r, oid, NULL, object_info_flags) >= 0;
}
int repo_has_object_file_with_flags(struct repository *r,
const struct object_id *oid, int flags)
{
if (!startup_info->have_repository)
return 0;
sha1-file: remove OBJECT_INFO_SKIP_CACHED In a partial clone, if a user provides the hash of the empty tree ("git mktree </dev/null" - for SHA-1, this is 4b825d...) to a command which requires that that object be parsed, for example: git diff-tree 4b825d <a non-empty tree> then Git will lazily fetch the empty tree, unnecessarily, because parsing of that object invokes repo_has_object_file(), which does not special-case the empty tree. Instead, teach repo_has_object_file() to consult find_cached_object() (which handles the empty tree), thus bringing it in line with the rest of the object-store-accessing functions. A cost is that repo_has_object_file() will now need to oideq upon each invocation, but that is trivial compared to the filesystem lookup or the pack index search required anyway. (And if find_cached_object() needs to do more because of previous invocations to pretend_object_file(), all the more reason to be consistent in whether we present cached objects.) As a historical note, the function now known as repo_read_object_file() was taught the empty tree in 346245a1bb ("hard-code the empty tree object", 2008-02-13), and the function now known as oid_object_info() was taught the empty tree in c4d9986f5f ("sha1_object_info: examine cached_object store too", 2011-02-07). repo_has_object_file() was never updated, perhaps due to oversight. The flag OBJECT_INFO_SKIP_CACHED, introduced later in dfdd4afcf9 ("sha1_file: teach sha1_object_info_extended more flags", 2017-06-26) and used in e83e71c5e1 ("sha1_file: refactor has_sha1_file_with_flags", 2017-06-26), was introduced to preserve this difference in empty-tree handling, but now it can be removed. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-02 21:16:30 +01:00
return oid_object_info_extended(r, oid, NULL, flags) >= 0;
}
int repo_has_object_file(struct repository *r,
const struct object_id *oid)
{
return repo_has_object_file_with_flags(r, oid, 0);
fetch: use "quick" has_sha1_file for tag following When we auto-follow tags in a fetch, we look at all of the tags advertised by the remote and fetch ones where we don't already have the tag, but we do have the object it peels to. This involves a lot of calls to has_sha1_file(), some of which we can reasonably expect to fail. Since 45e8a74 (has_sha1_file: re-check pack directory before giving up, 2013-08-30), this may cause many calls to reprepare_packed_git(), which is potentially expensive. This has gone unnoticed for several years because it requires a fairly unique setup to matter: 1. You need to have a lot of packs on the client side to make reprepare_packed_git() expensive (the most expensive part is finding duplicates in an unsorted list, which is currently quadratic). 2. You need a large number of tag refs on the server side that are candidates for auto-following (i.e., that the client doesn't have). Each one triggers a re-read of the pack directory. 3. Under normal circumstances, the client would auto-follow those tags and after one large fetch, (2) would no longer be true. But if those tags point to history which is disconnected from what the client otherwise fetches, then it will never auto-follow, and those candidates will impact it on every fetch. So when all three are true, each fetch pays an extra O(nr_tags * nr_packs^2) cost, mostly in string comparisons on the pack names. This was exacerbated by 47bf4b0 (prepare_packed_git_one: refactor duplicate-pack check, 2014-06-30) which uses a slightly more expensive string check, under the assumption that the duplicate check doesn't happen very often (and it shouldn't; the real problem here is how often we are calling reprepare_packed_git()). This patch teaches fetch to use HAS_SHA1_QUICK to sacrifice accuracy for speed, in cases where we might be racy with a simultaneous repack. This is similar to the fix in 0eeb077 (index-pack: avoid excessive re-reading of pack directory, 2015-06-09). As with that case, it's OK for has_sha1_file() occasionally say "no I don't have it" when we do, because the worst case is not a corruption, but simply that we may fail to auto-follow a tag that points to it. Here are results from the included perf script, which sets up a situation similar to the one described above: Test HEAD^ HEAD ---------------------------------------------------------- 5550.4: fetch 11.21(10.42+0.78) 0.08(0.04+0.02) -99.3% Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-13 18:53:44 +02:00
}
static void check_tree(const void *buf, size_t size)
{
struct tree_desc desc;
struct name_entry entry;
init_tree_desc(&desc, buf, size);
while (tree_entry(&desc, &entry))
/* do nothing
* tree_entry() will die() on malformed entries */
;
}
static void check_commit(const void *buf, size_t size)
{
struct commit c;
memset(&c, 0, sizeof(c));
if (parse_commit_buffer(the_repository, &c, buf, size, 0))
die(_("corrupt commit"));
}
static void check_tag(const void *buf, size_t size)
{
struct tag t;
memset(&t, 0, sizeof(t));
if (parse_tag_buffer(the_repository, &t, buf, size))
die(_("corrupt tag"));
}
static int index_mem(struct index_state *istate,
struct object_id *oid, void *buf, size_t size,
enum object_type type,
const char *path, unsigned flags)
{
int ret = 0;
int re_allocated = 0;
int write_object = flags & HASH_WRITE_OBJECT;
if (!type)
type = OBJ_BLOB;
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-13 20:07:23 +01:00
/*
* Convert blobs to git internal format
*/
if ((type == OBJ_BLOB) && path) {
struct strbuf nbuf = STRBUF_INIT;
if (convert_to_git(istate, path, buf, size, &nbuf,
get_conv_flags(flags))) {
buf = strbuf_detach(&nbuf, &size);
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-13 20:07:23 +01:00
re_allocated = 1;
}
}
if (flags & HASH_FORMAT_CHECK) {
if (type == OBJ_TREE)
check_tree(buf, size);
if (type == OBJ_COMMIT)
check_commit(buf, size);
if (type == OBJ_TAG)
check_tag(buf, size);
}
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-13 20:07:23 +01:00
if (write_object)
ret = write_object_file(buf, size, type, oid);
else
hash_object_file(the_hash_algo, buf, size, type, oid);
if (re_allocated)
Lazy man's auto-CRLF It currently does NOT know about file attributes, so it does its conversion purely based on content. Maybe that is more in the "git philosophy" anyway, since content is king, but I think we should try to do the file attributes to turn it off on demand. Anyway, BY DEFAULT it is off regardless, because it requires a [core] AutoCRLF = true in your config file to be enabled. We could make that the default for Windows, of course, the same way we do some other things (filemode etc). But you can actually enable it on UNIX, and it will cause: - "git update-index" will write blobs without CRLF - "git diff" will diff working tree files without CRLF - "git checkout" will write files to the working tree _with_ CRLF and things work fine. Funnily, it actually shows an odd file in git itself: git clone -n git test-crlf cd test-crlf git config core.autocrlf true git checkout git diff shows a diff for "Documentation/docbook-xsl.css". Why? Because we have actually checked in that file *with* CRLF! So when "core.autocrlf" is true, we'll always generate a *different* hash for it in the index, because the index hash will be for the content _without_ CRLF. Is this complete? I dunno. It seems to work for me. It doesn't use the filename at all right now, and that's probably a deficiency (we could certainly make the "is_binary()" heuristics also take standard filename heuristics into account). I don't pass in the filename at all for the "index_fd()" case (git-update-index), so that would need to be passed around, but this actually works fine. NOTE NOTE NOTE! The "is_binary()" heuristics are totally made-up by yours truly. I will not guarantee that they work at all reasonable. Caveat emptor. But it _is_ simple, and it _is_ safe, since it's all off by default. The patch is pretty simple - the biggest part is the new "convert.c" file, but even that is really just basic stuff that anybody can write in "Teaching C 101" as a final project for their first class in programming. Not to say that it's bug-free, of course - but at least we're not talking about rocket surgery here. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-02-13 20:07:23 +01:00
free(buf);
return ret;
}
static int index_stream_convert_blob(struct index_state *istate,
struct object_id *oid,
int fd,
const char *path,
unsigned flags)
convert: stream from fd to required clean filter to reduce used address space The data is streamed to the filter process anyway. Better avoid mapping the file if possible. This is especially useful if a clean filter reduces the size, for example if it computes a sha1 for binary data, like git media. The file size that the previous implementation could handle was limited by the available address space; large files for example could not be handled with (32-bit) msysgit. The new implementation can filter files of any size as long as the filter output is small enough. The new code path is only taken if the filter is required. The filter consumes data directly from the fd. If it fails, the original data is not immediately available. The condition can easily be handled as a fatal error, which is expected for a required filter anyway. If the filter was not required, the condition would need to be handled in a different way, like seeking to 0 and reading the data. But this would require more restructuring of the code and is probably not worth it. The obvious approach of falling back to reading all data would not help achieving the main purpose of this patch, which is to handle large files with limited address space. If reading all data is an option, we can simply take the old code path right away and mmap the entire file. The environment variable GIT_MMAP_LIMIT, which has been introduced in a previous commit is used to test that the expected code path is taken. A related test that exercises required filters is modified to verify that the data actually has been modified on its way from the file system to the object store. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26 17:23:25 +02:00
{
int ret = 0;
convert: stream from fd to required clean filter to reduce used address space The data is streamed to the filter process anyway. Better avoid mapping the file if possible. This is especially useful if a clean filter reduces the size, for example if it computes a sha1 for binary data, like git media. The file size that the previous implementation could handle was limited by the available address space; large files for example could not be handled with (32-bit) msysgit. The new implementation can filter files of any size as long as the filter output is small enough. The new code path is only taken if the filter is required. The filter consumes data directly from the fd. If it fails, the original data is not immediately available. The condition can easily be handled as a fatal error, which is expected for a required filter anyway. If the filter was not required, the condition would need to be handled in a different way, like seeking to 0 and reading the data. But this would require more restructuring of the code and is probably not worth it. The obvious approach of falling back to reading all data would not help achieving the main purpose of this patch, which is to handle large files with limited address space. If reading all data is an option, we can simply take the old code path right away and mmap the entire file. The environment variable GIT_MMAP_LIMIT, which has been introduced in a previous commit is used to test that the expected code path is taken. A related test that exercises required filters is modified to verify that the data actually has been modified on its way from the file system to the object store. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26 17:23:25 +02:00
const int write_object = flags & HASH_WRITE_OBJECT;
struct strbuf sbuf = STRBUF_INIT;
assert(path);
assert(would_convert_to_git_filter_fd(istate, path));
convert: stream from fd to required clean filter to reduce used address space The data is streamed to the filter process anyway. Better avoid mapping the file if possible. This is especially useful if a clean filter reduces the size, for example if it computes a sha1 for binary data, like git media. The file size that the previous implementation could handle was limited by the available address space; large files for example could not be handled with (32-bit) msysgit. The new implementation can filter files of any size as long as the filter output is small enough. The new code path is only taken if the filter is required. The filter consumes data directly from the fd. If it fails, the original data is not immediately available. The condition can easily be handled as a fatal error, which is expected for a required filter anyway. If the filter was not required, the condition would need to be handled in a different way, like seeking to 0 and reading the data. But this would require more restructuring of the code and is probably not worth it. The obvious approach of falling back to reading all data would not help achieving the main purpose of this patch, which is to handle large files with limited address space. If reading all data is an option, we can simply take the old code path right away and mmap the entire file. The environment variable GIT_MMAP_LIMIT, which has been introduced in a previous commit is used to test that the expected code path is taken. A related test that exercises required filters is modified to verify that the data actually has been modified on its way from the file system to the object store. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26 17:23:25 +02:00
convert_to_git_filter_fd(istate, path, fd, &sbuf,
get_conv_flags(flags));
convert: stream from fd to required clean filter to reduce used address space The data is streamed to the filter process anyway. Better avoid mapping the file if possible. This is especially useful if a clean filter reduces the size, for example if it computes a sha1 for binary data, like git media. The file size that the previous implementation could handle was limited by the available address space; large files for example could not be handled with (32-bit) msysgit. The new implementation can filter files of any size as long as the filter output is small enough. The new code path is only taken if the filter is required. The filter consumes data directly from the fd. If it fails, the original data is not immediately available. The condition can easily be handled as a fatal error, which is expected for a required filter anyway. If the filter was not required, the condition would need to be handled in a different way, like seeking to 0 and reading the data. But this would require more restructuring of the code and is probably not worth it. The obvious approach of falling back to reading all data would not help achieving the main purpose of this patch, which is to handle large files with limited address space. If reading all data is an option, we can simply take the old code path right away and mmap the entire file. The environment variable GIT_MMAP_LIMIT, which has been introduced in a previous commit is used to test that the expected code path is taken. A related test that exercises required filters is modified to verify that the data actually has been modified on its way from the file system to the object store. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26 17:23:25 +02:00
if (write_object)
ret = write_object_file(sbuf.buf, sbuf.len, OBJ_BLOB,
oid);
convert: stream from fd to required clean filter to reduce used address space The data is streamed to the filter process anyway. Better avoid mapping the file if possible. This is especially useful if a clean filter reduces the size, for example if it computes a sha1 for binary data, like git media. The file size that the previous implementation could handle was limited by the available address space; large files for example could not be handled with (32-bit) msysgit. The new implementation can filter files of any size as long as the filter output is small enough. The new code path is only taken if the filter is required. The filter consumes data directly from the fd. If it fails, the original data is not immediately available. The condition can easily be handled as a fatal error, which is expected for a required filter anyway. If the filter was not required, the condition would need to be handled in a different way, like seeking to 0 and reading the data. But this would require more restructuring of the code and is probably not worth it. The obvious approach of falling back to reading all data would not help achieving the main purpose of this patch, which is to handle large files with limited address space. If reading all data is an option, we can simply take the old code path right away and mmap the entire file. The environment variable GIT_MMAP_LIMIT, which has been introduced in a previous commit is used to test that the expected code path is taken. A related test that exercises required filters is modified to verify that the data actually has been modified on its way from the file system to the object store. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26 17:23:25 +02:00
else
hash_object_file(the_hash_algo, sbuf.buf, sbuf.len, OBJ_BLOB,
oid);
convert: stream from fd to required clean filter to reduce used address space The data is streamed to the filter process anyway. Better avoid mapping the file if possible. This is especially useful if a clean filter reduces the size, for example if it computes a sha1 for binary data, like git media. The file size that the previous implementation could handle was limited by the available address space; large files for example could not be handled with (32-bit) msysgit. The new implementation can filter files of any size as long as the filter output is small enough. The new code path is only taken if the filter is required. The filter consumes data directly from the fd. If it fails, the original data is not immediately available. The condition can easily be handled as a fatal error, which is expected for a required filter anyway. If the filter was not required, the condition would need to be handled in a different way, like seeking to 0 and reading the data. But this would require more restructuring of the code and is probably not worth it. The obvious approach of falling back to reading all data would not help achieving the main purpose of this patch, which is to handle large files with limited address space. If reading all data is an option, we can simply take the old code path right away and mmap the entire file. The environment variable GIT_MMAP_LIMIT, which has been introduced in a previous commit is used to test that the expected code path is taken. A related test that exercises required filters is modified to verify that the data actually has been modified on its way from the file system to the object store. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26 17:23:25 +02:00
strbuf_release(&sbuf);
return ret;
}
static int index_pipe(struct index_state *istate, struct object_id *oid,
int fd, enum object_type type,
const char *path, unsigned flags)
{
struct strbuf sbuf = STRBUF_INIT;
int ret;
if (strbuf_read(&sbuf, fd, 4096) >= 0)
ret = index_mem(istate, oid, sbuf.buf, sbuf.len, type, path, flags);
else
ret = -1;
strbuf_release(&sbuf);
return ret;
}
#define SMALL_FILE_SIZE (32*1024)
static int index_core(struct index_state *istate,
struct object_id *oid, int fd, size_t size,
enum object_type type, const char *path,
unsigned flags)
{
int ret;
if (!size) {
ret = index_mem(istate, oid, "", size, type, path, flags);
} else if (size <= SMALL_FILE_SIZE) {
char *buf = xmalloc(size);
ssize_t read_result = read_in_full(fd, buf, size);
if (read_result < 0)
ret = error_errno(_("read error while indexing %s"),
path ? path : "<unknown>");
else if (read_result != size)
ret = error(_("short read while indexing %s"),
path ? path : "<unknown>");
else
ret = index_mem(istate, oid, buf, size, type, path, flags);
free(buf);
} else {
void *buf = xmmap(NULL, size, PROT_READ, MAP_PRIVATE, fd, 0);
ret = index_mem(istate, oid, buf, size, type, path, flags);
munmap(buf, size);
}
return ret;
}
/*
* This creates one packfile per large blob unless bulk-checkin
* machinery is "plugged".
*
* This also bypasses the usual "convert-to-git" dance, and that is on
* purpose. We could write a streaming version of the converting
* functions and insert that before feeding the data to fast-import
do not stream large files to pack when filters are in use Because git's object format requires us to specify the number of bytes in the object in its header, we must know the size before streaming a blob into the object database. This is not a problem when adding a regular file, as we can get the size from stat(). However, when filters are in use (such as autocrlf, or the ident, filter, or eol gitattributes), we have no idea what the ultimate size will be. The current code just punts on the whole issue and ignores filter configuration entirely for files larger than core.bigfilethreshold. This can generate confusing results if you use filters for large binary files, as the filter will suddenly stop working as the file goes over a certain size. Rather than try to handle unknown input sizes with streaming, this patch just turns off the streaming optimization when filters are in use. This has a slight performance regression in a very specific case: if you have autocrlf on, but no gitattributes, a large binary file will avoid the streaming code path because we don't know beforehand whether it will need conversion or not. But if you are handling large binary files, you should be marking them as such via attributes (or at least not using autocrlf, and instead marking your text files as such). And the flip side is that if you have a large _non_-binary file, there is a correctness improvement; before we did not apply the conversion at all. The first half of the new t1051 script covers these failures on input. The second half tests the matching output code paths. These already work correctly, and do not need any adjustment. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-24 23:10:17 +01:00
* (or equivalent in-core API described above). However, that is
* somewhat complicated, as we do not know the size of the filter
* result, which we need to know beforehand when writing a git object.
* Since the primary motivation for trying to stream from the working
* tree file and to avoid mmaping it in core is to deal with large
* binary blobs, they generally do not want to get any conversion, and
* callers should avoid this code path when filters are requested.
*/
static int index_stream(struct object_id *oid, int fd, size_t size,
enum object_type type, const char *path,
unsigned flags)
{
return index_bulk_checkin(oid, fd, size, type, path, flags);
}
int index_fd(struct index_state *istate, struct object_id *oid,
int fd, struct stat *st,
enum object_type type, const char *path, unsigned flags)
{
int ret;
/*
* Call xsize_t() only when needed to avoid potentially unnecessary
* die() for large files.
*/
if (type == OBJ_BLOB && path && would_convert_to_git_filter_fd(istate, path))
ret = index_stream_convert_blob(istate, oid, fd, path, flags);
convert: stream from fd to required clean filter to reduce used address space The data is streamed to the filter process anyway. Better avoid mapping the file if possible. This is especially useful if a clean filter reduces the size, for example if it computes a sha1 for binary data, like git media. The file size that the previous implementation could handle was limited by the available address space; large files for example could not be handled with (32-bit) msysgit. The new implementation can filter files of any size as long as the filter output is small enough. The new code path is only taken if the filter is required. The filter consumes data directly from the fd. If it fails, the original data is not immediately available. The condition can easily be handled as a fatal error, which is expected for a required filter anyway. If the filter was not required, the condition would need to be handled in a different way, like seeking to 0 and reading the data. But this would require more restructuring of the code and is probably not worth it. The obvious approach of falling back to reading all data would not help achieving the main purpose of this patch, which is to handle large files with limited address space. If reading all data is an option, we can simply take the old code path right away and mmap the entire file. The environment variable GIT_MMAP_LIMIT, which has been introduced in a previous commit is used to test that the expected code path is taken. A related test that exercises required filters is modified to verify that the data actually has been modified on its way from the file system to the object store. Signed-off-by: Steffen Prohaska <prohaska@zib.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-26 17:23:25 +02:00
else if (!S_ISREG(st->st_mode))
ret = index_pipe(istate, oid, fd, type, path, flags);
else if (st->st_size <= big_file_threshold || type != OBJ_BLOB ||
(path && would_convert_to_git(istate, path)))
ret = index_core(istate, oid, fd, xsize_t(st->st_size),
type, path, flags);
else
ret = index_stream(oid, fd, xsize_t(st->st_size), type, path,
flags);
close(fd);
return ret;
}
int index_path(struct index_state *istate, struct object_id *oid,
const char *path, struct stat *st, unsigned flags)
{
int fd;
struct strbuf sb = STRBUF_INIT;
int rc = 0;
switch (st->st_mode & S_IFMT) {
case S_IFREG:
fd = open(path, O_RDONLY);
if (fd < 0)
return error_errno("open(\"%s\")", path);
if (index_fd(istate, oid, fd, st, OBJ_BLOB, path, flags) < 0)
return error(_("%s: failed to insert into database"),
path);
break;
case S_IFLNK:
if (strbuf_readlink(&sb, path, st->st_size))
return error_errno("readlink(\"%s\")", path);
if (!(flags & HASH_WRITE_OBJECT))
hash_object_file(the_hash_algo, sb.buf, sb.len,
OBJ_BLOB, oid);
else if (write_object_file(sb.buf, sb.len, OBJ_BLOB, oid))
rc = error(_("%s: failed to insert into database"), path);
strbuf_release(&sb);
break;
case S_IFDIR:
return resolve_gitlink_ref(path, "HEAD", oid);
default:
return error(_("%s: unsupported file type"), path);
}
return rc;
}
int read_pack_header(int fd, struct pack_header *header)
{
if (read_in_full(fd, header, sizeof(*header)) != sizeof(*header))
/* "eof before pack header was fully read" */
return PH_ERROR_EOF;
if (header->hdr_signature != htonl(PACK_SIGNATURE))
/* "protocol error (pack signature mismatch detected)" */
return PH_ERROR_PACK_SIGNATURE;
if (!pack_version_ok(header->hdr_version))
/* "protocol error (pack version unsupported)" */
return PH_ERROR_PROTOCOL;
return 0;
}
void assert_oid_type(const struct object_id *oid, enum object_type expect)
{
enum object_type type = oid_object_info(the_repository, oid, NULL);
if (type < 0)
die(_("%s is not a valid object"), oid_to_hex(oid));
if (type != expect)
die(_("%s is not a valid '%s' object"), oid_to_hex(oid),
type_name(expect));
}
int for_each_file_in_obj_subdir(unsigned int subdir_nr,
struct strbuf *path,
each_loose_object_fn obj_cb,
each_loose_cruft_fn cruft_cb,
each_loose_subdir_fn subdir_cb,
void *data)
{
size_t origlen, baselen;
DIR *dir;
struct dirent *de;
int r = 0;
struct object_id oid;
if (subdir_nr > 0xff)
BUG("invalid loose object subdirectory: %x", subdir_nr);
origlen = path->len;
strbuf_complete(path, '/');
strbuf_addf(path, "%02x", subdir_nr);
dir = opendir(path->buf);
if (!dir) {
if (errno != ENOENT)
r = error_errno(_("unable to open %s"), path->buf);
strbuf_setlen(path, origlen);
return r;
}
oid.hash[0] = subdir_nr;
2017-12-04 15:06:03 +01:00
strbuf_addch(path, '/');
baselen = path->len;
while ((de = readdir_skip_dot_and_dotdot(dir))) {
2017-12-04 15:06:03 +01:00
size_t namelen;
2017-12-04 15:06:03 +01:00
namelen = strlen(de->d_name);
strbuf_setlen(path, baselen);
2017-12-04 15:06:03 +01:00
strbuf_add(path, de->d_name, namelen);
if (namelen == the_hash_algo->hexsz - 2 &&
!hex_to_bytes(oid.hash + 1, de->d_name,
the_hash_algo->rawsz - 1)) {
oid_set_algo(&oid, the_hash_algo);
if (obj_cb) {
r = obj_cb(&oid, path->buf, data);
if (r)
break;
}
continue;
}
if (cruft_cb) {
r = cruft_cb(de->d_name, path->buf, data);
if (r)
break;
}
}
closedir(dir);
2017-12-04 15:06:03 +01:00
strbuf_setlen(path, baselen - 1);
if (!r && subdir_cb)
r = subdir_cb(subdir_nr, path->buf, data);
strbuf_setlen(path, origlen);
return r;
}
int for_each_loose_file_in_objdir_buf(struct strbuf *path,
each_loose_object_fn obj_cb,
each_loose_cruft_fn cruft_cb,
each_loose_subdir_fn subdir_cb,
void *data)
{
int r = 0;
int i;
for (i = 0; i < 256; i++) {
r = for_each_file_in_obj_subdir(i, path, obj_cb, cruft_cb,
subdir_cb, data);
if (r)
break;
}
return r;
}
int for_each_loose_file_in_objdir(const char *path,
each_loose_object_fn obj_cb,
each_loose_cruft_fn cruft_cb,
each_loose_subdir_fn subdir_cb,
void *data)
{
struct strbuf buf = STRBUF_INIT;
int r;
strbuf_addstr(&buf, path);
r = for_each_loose_file_in_objdir_buf(&buf, obj_cb, cruft_cb,
subdir_cb, data);
strbuf_release(&buf);
return r;
}
int for_each_loose_object(each_loose_object_fn cb, void *data,
enum for_each_object_flags flags)
{
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
struct object_directory *odb;
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
prepare_alt_odb(the_repository);
for (odb = the_repository->objects->odb; odb; odb = odb->next) {
int r = for_each_loose_file_in_objdir(odb->path, cb, NULL,
NULL, data);
if (r)
return r;
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
if (flags & FOR_EACH_OBJECT_LOCAL_ONLY)
break;
}
reachable: only mark local objects as recent When pruning and repacking a repository that has an alternate object store configured, we may traverse a large number of objects in the alternate. This serves no purpose, and may be expensive to do. A longer explanation is below. Commits d3038d2 and abcb865 taught prune and pack-objects (respectively) to treat "recent" objects as tips for reachability, so that we keep whole chunks of history. They built on the object traversal in 660c889 (sha1_file: add for_each iterators for loose and packed objects, 2014-10-15), which covers both local and alternate objects. In both cases, covering alternate objects is unnecessary, as both commands can only drop objects from the local repository. In the case of prune, we traverse only the local object directory. And in the case of repacking, while we may or may not include local objects in our pack, we will never reach into the alternate with "repack -d". The "-l" option is only a question of whether we are migrating objects from the alternate into our repository, or leaving them untouched. It is possible that we may drop an object that is depended upon by another object in the alternate. For example, imagine two repositories, A and B, with A pointing to B as an alternate. Now imagine a commit that is in B which references a tree that is only in A. Traversing from recent objects in B might prevent A from dropping that tree. But this case isn't worth covering. Repo B should take responsibility for its own objects. It would never have had the commit in the first place if it did not also have the tree, and assuming it is using the same "keep recent chunks of history" scheme, then it would itself keep the tree, as well. So checking the alternate objects is not worth doing, and come with a significant performance impact. In both cases, we skip any recent objects that have already been marked SEEN (i.e., that we know are already reachable for prune, or included in the pack for a repack). So there is a slight waste of time in opening the alternate packs at all, only to notice that we have already considered each object. But much worse, the alternate repository may have a large number of objects that are not reachable from the local repository at all, and we end up adding them to the traversal. We can fix this by considering only local unseen objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-27 12:32:41 +01:00
sha1-file: use an object_directory for the main object dir Our handling of alternate object directories is needlessly different from the main object directory. As a result, many places in the code basically look like this: do_something(r->objects->objdir); for (odb = r->objects->alt_odb_list; odb; odb = odb->next) do_something(odb->path); That gets annoying when do_something() is non-trivial, and we've resorted to gross hacks like creating fake alternates (see find_short_object_filename()). Instead, let's give each raw_object_store a unified list of object_directory structs. The first will be the main store, and everything after is an alternate. Very few callers even care about the distinction, and can just loop over the whole list (and those who care can just treat the first element differently). A few observations: - we don't need r->objects->objectdir anymore, and can just mechanically convert that to r->objects->odb->path - object_directory's path field needs to become a real pointer rather than a FLEX_ARRAY, in order to fill it with expand_base_dir() - we'll call prepare_alt_odb() earlier in many functions (i.e., outside of the loop). This may result in us calling it even when our function would be satisfied looking only at the main odb. But this doesn't matter in practice. It's not a very expensive operation in the first place, and in the majority of cases it will be a noop. We call it already (and cache its results) in prepare_packed_git(), and we'll generally check packs before loose objects. So essentially every program is going to call it immediately once per program. Arguably we should just prepare_alt_odb() immediately upon setting up the repository's object directory, which would save us sprinkling calls throughout the code base (and forgetting to do so has been a source of subtle bugs in the past). But I've stopped short of that here, since there are already a lot of other moving parts in this patch. - Most call sites just get shorter. The check_and_freshen() functions are an exception, because they have entry points to handle local and nonlocal directories separately. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-12 15:50:39 +01:00
return 0;
}
static int append_loose_object(const struct object_id *oid, const char *path,
void *data)
{
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-08 01:10:19 +02:00
oidtree_insert(data, oid);
return 0;
}
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-08 01:10:19 +02:00
struct oidtree *odb_loose_cache(struct object_directory *odb,
const struct object_id *oid)
{
int subdir_nr = oid->hash[0];
struct strbuf buf = STRBUF_INIT;
size_t word_bits = bitsizeof(odb->loose_objects_subdir_seen[0]);
size_t word_index = subdir_nr / word_bits;
size_t mask = (size_t)1u << (subdir_nr % word_bits);
uint32_t *bitmap;
if (subdir_nr < 0 ||
subdir_nr >= bitsizeof(odb->loose_objects_subdir_seen))
BUG("subdir_nr out of range");
reachable: only mark local objects as recent When pruning and repacking a repository that has an alternate object store configured, we may traverse a large number of objects in the alternate. This serves no purpose, and may be expensive to do. A longer explanation is below. Commits d3038d2 and abcb865 taught prune and pack-objects (respectively) to treat "recent" objects as tips for reachability, so that we keep whole chunks of history. They built on the object traversal in 660c889 (sha1_file: add for_each iterators for loose and packed objects, 2014-10-15), which covers both local and alternate objects. In both cases, covering alternate objects is unnecessary, as both commands can only drop objects from the local repository. In the case of prune, we traverse only the local object directory. And in the case of repacking, while we may or may not include local objects in our pack, we will never reach into the alternate with "repack -d". The "-l" option is only a question of whether we are migrating objects from the alternate into our repository, or leaving them untouched. It is possible that we may drop an object that is depended upon by another object in the alternate. For example, imagine two repositories, A and B, with A pointing to B as an alternate. Now imagine a commit that is in B which references a tree that is only in A. Traversing from recent objects in B might prevent A from dropping that tree. But this case isn't worth covering. Repo B should take responsibility for its own objects. It would never have had the commit in the first place if it did not also have the tree, and assuming it is using the same "keep recent chunks of history" scheme, then it would itself keep the tree, as well. So checking the alternate objects is not worth doing, and come with a significant performance impact. In both cases, we skip any recent objects that have already been marked SEEN (i.e., that we know are already reachable for prune, or included in the pack for a repack). So there is a slight waste of time in opening the alternate packs at all, only to notice that we have already considered each object. But much worse, the alternate repository may have a large number of objects that are not reachable from the local repository at all, and we end up adding them to the traversal. We can fix this by considering only local unseen objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-27 12:32:41 +01:00
bitmap = &odb->loose_objects_subdir_seen[word_index];
if (*bitmap & mask)
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-08 01:10:19 +02:00
return odb->loose_objects_cache;
if (!odb->loose_objects_cache) {
ALLOC_ARRAY(odb->loose_objects_cache, 1);
oidtree_init(odb->loose_objects_cache);
}
strbuf_addstr(&buf, odb->path);
for_each_file_in_obj_subdir(subdir_nr, &buf,
append_loose_object,
NULL, NULL,
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-08 01:10:19 +02:00
odb->loose_objects_cache);
*bitmap |= mask;
strbuf_release(&buf);
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-08 01:10:19 +02:00
return odb->loose_objects_cache;
}
void odb_clear_loose_cache(struct object_directory *odb)
{
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-08 01:10:19 +02:00
oidtree_clear(odb->loose_objects_cache);
FREE_AND_NULL(odb->loose_objects_cache);
memset(&odb->loose_objects_subdir_seen, 0,
sizeof(odb->loose_objects_subdir_seen));
}
static int check_stream_oid(git_zstream *stream,
const char *hdr,
unsigned long size,
const char *path,
const struct object_id *expected_oid)
{
git_hash_ctx c;
struct object_id real_oid;
unsigned char buf[4096];
unsigned long total_read;
int status = Z_OK;
the_hash_algo->init_fn(&c);
the_hash_algo->update_fn(&c, hdr, stream->total_out);
/*
* We already read some bytes into hdr, but the ones up to the NUL
* do not count against the object's content size.
*/
total_read = stream->total_out - strlen(hdr) - 1;
/*
* This size comparison must be "<=" to read the final zlib packets;
* see the comment in unpack_loose_rest for details.
*/
while (total_read <= size &&
(status == Z_OK ||
(status == Z_BUF_ERROR && !stream->avail_out))) {
stream->next_out = buf;
stream->avail_out = sizeof(buf);
if (size - total_read < stream->avail_out)
stream->avail_out = size - total_read;
status = git_inflate(stream, Z_FINISH);
the_hash_algo->update_fn(&c, buf, stream->next_out - buf);
total_read += stream->next_out - buf;
}
git_inflate_end(stream);
if (status != Z_STREAM_END) {
error(_("corrupt loose object '%s'"), oid_to_hex(expected_oid));
return -1;
}
if (stream->avail_in) {
error(_("garbage at end of loose object '%s'"),
oid_to_hex(expected_oid));
return -1;
}
the_hash_algo->final_oid_fn(&real_oid, &c);
if (!oideq(expected_oid, &real_oid)) {
error(_("hash mismatch for %s (expected %s)"), path,
oid_to_hex(expected_oid));
return -1;
}
return 0;
}
int read_loose_object(const char *path,
const struct object_id *expected_oid,
fsck: report invalid object type-path combinations Improve the error that's emitted in cases where we find a loose object we parse, but which isn't at the location we expect it to be. Before this change we'd prefix the error with a not-a-OID derived from the path at which the object was found, due to an emergent behavior in how we'd end up with an "OID" in these codepaths. Now we'll instead say what object we hashed, and what path it was found at. Before this patch series e.g.: $ git hash-object --stdin -w -t blob </dev/null e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ mv objects/e6/ objects/e7 Would emit ("[...]" used to abbreviate the OIDs): git fsck error: hash mismatch for ./objects/e7/9d[...] (expected e79d[...]) error: e79d[...]: object corrupt or missing: ./objects/e7/9d[...] Now we'll instead emit: error: e69d[...]: hash-path mismatch, found at: ./objects/e7/9d[...] Furthermore, we'll do the right thing when the object type and its location are bad. I.e. this case: $ git hash-object --stdin -w -t garbage --literally </dev/null 8315a83d2acc4c174aed59430f9a9c4ed926440f $ mv objects/83 objects/84 As noted in an earlier commits we'd simply die early in those cases, until preceding commits fixed the hard die on invalid object type: $ git fsck fatal: invalid object type Now we'll instead emit sensible error messages: $ git fsck error: 8315[...]: hash-path mismatch, found at: ./objects/84/15[...] error: 8315[...]: object is of unknown type 'garbage': ./objects/84/15[...] In both fsck.c and object-file.c we're using null_oid as a sentinel value for checking whether we got far enough to be certain that the issue was indeed this OID mismatch. We need to add the "object corrupt or missing" special-case to deal with cases where read_loose_object() will return an error before completing check_object_signature(), e.g. if we have an error in unpack_loose_rest() because we find garbage after the valid gzip content: $ git hash-object --stdin -w -t blob </dev/null e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ chmod 755 objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ echo garbage >>objects/e6/9de29bb2d1d6434b8b29ae775ad8c2e48c5391 $ git fsck error: garbage at end of loose object 'e69d[...]' error: unable to unpack contents of ./objects/e6/9d[...] error: e69d[...]: object corrupt or missing: ./objects/e6/9d[...] There is currently some weird messaging in the edge case when the two are combined, i.e. because we're not explicitly passing along an error state about this specific scenario from check_stream_oid() via read_loose_object() we'll end up printing the null OID if an object is of an unknown type *and* it can't be unpacked by zlib, e.g.: $ git hash-object --stdin -w -t garbage --literally </dev/null 8315a83d2acc4c174aed59430f9a9c4ed926440f $ chmod 755 objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f $ echo garbage >>objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f $ /usr/bin/git fsck fatal: invalid object type $ ~/g/git/git fsck error: garbage at end of loose object '8315a83d2acc4c174aed59430f9a9c4ed926440f' error: unable to unpack contents of ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f error: 8315a83d2acc4c174aed59430f9a9c4ed926440f: object corrupt or missing: ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f error: 0000000000000000000000000000000000000000: object is of unknown type 'garbage': ./objects/83/15a83d2acc4c174aed59430f9a9c4ed926440f [...] I think it's OK to leave that for future improvements, which would involve enum-ifying more error state as we've done with "enum unpack_loose_header_result" in preceding commits. In these increasingly more obscure cases the worst that can happen is that we'll get slightly nonsensical or inapplicable error messages. There's other such potential edge cases, all of which might produce some confusing messaging, but still be handled correctly as far as passing along errors goes. E.g. if check_object_signature() returns and oideq(real_oid, null_oid()) is true, which could happen if it returns -1 due to the read_istream() call having failed. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:53 +02:00
struct object_id *real_oid,
fsck: don't hard die on invalid object types Change the error fsck emits on invalid object types, such as: $ git hash-object --stdin -w -t garbage --literally </dev/null <OID> From the very ungraceful error of: $ git fsck fatal: invalid object type $ To: $ git fsck error: <OID>: object is of unknown type 'garbage': <OID_PATH> [ other fsck output ] We'll still exit with non-zero, but now we'll finish the rest of the traversal. The tests that's being added here asserts that we'll still complain about other fsck issues (e.g. an unrelated dangling blob). To do this we need to pass down the "OBJECT_INFO_ALLOW_UNKNOWN_TYPE" flag from read_loose_object() through to parse_loose_header(). Since the read_loose_object() function is only used in builtin/fsck.c we can simply change it to accept a "struct object_info" (which contains the OBJECT_INFO_ALLOW_UNKNOWN_TYPE in its flags). See f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for the introduction of read_loose_object(). Since we'll need a "struct strbuf" to hold the "type_name" let's pass it to the for_each_loose_file_in_objdir() callback to avoid allocating a new one for each loose object in the iteration. It also makes the memory management simpler than sticking it in fsck_loose() itself, as we'll only need to strbuf_reset() it, with no need to do a strbuf_release() before each "return". Before this commit we'd never check the "type" if read_loose_object() failed, but now we do. We therefore need to initialize it to OBJ_NONE to be able to tell the difference between e.g. its unpack_loose_header() having failed, and us getting past that and into parse_loose_header(). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:52 +02:00
void **contents,
struct object_info *oi)
{
int ret = -1;
void *map = NULL;
unsigned long mapsize;
git_zstream stream;
char hdr[MAX_HEADER_LEN];
fsck: don't hard die on invalid object types Change the error fsck emits on invalid object types, such as: $ git hash-object --stdin -w -t garbage --literally </dev/null <OID> From the very ungraceful error of: $ git fsck fatal: invalid object type $ To: $ git fsck error: <OID>: object is of unknown type 'garbage': <OID_PATH> [ other fsck output ] We'll still exit with non-zero, but now we'll finish the rest of the traversal. The tests that's being added here asserts that we'll still complain about other fsck issues (e.g. an unrelated dangling blob). To do this we need to pass down the "OBJECT_INFO_ALLOW_UNKNOWN_TYPE" flag from read_loose_object() through to parse_loose_header(). Since the read_loose_object() function is only used in builtin/fsck.c we can simply change it to accept a "struct object_info" (which contains the OBJECT_INFO_ALLOW_UNKNOWN_TYPE in its flags). See f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for the introduction of read_loose_object(). Since we'll need a "struct strbuf" to hold the "type_name" let's pass it to the for_each_loose_file_in_objdir() callback to avoid allocating a new one for each loose object in the iteration. It also makes the memory management simpler than sticking it in fsck_loose() itself, as we'll only need to strbuf_reset() it, with no need to do a strbuf_release() before each "return". Before this commit we'd never check the "type" if read_loose_object() failed, but now we do. We therefore need to initialize it to OBJ_NONE to be able to tell the difference between e.g. its unpack_loose_header() having failed, and us getting past that and into parse_loose_header(). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:52 +02:00
unsigned long *size = oi->sizep;
map = map_loose_object_1(the_repository, path, NULL, &mapsize);
if (!map) {
error_errno(_("unable to mmap %s"), path);
goto out;
}
if (unpack_loose_header(&stream, map, mapsize, hdr, sizeof(hdr),
NULL) != ULHR_OK) {
error(_("unable to unpack header of %s"), path);
goto out;
}
fsck: don't hard die on invalid object types Change the error fsck emits on invalid object types, such as: $ git hash-object --stdin -w -t garbage --literally </dev/null <OID> From the very ungraceful error of: $ git fsck fatal: invalid object type $ To: $ git fsck error: <OID>: object is of unknown type 'garbage': <OID_PATH> [ other fsck output ] We'll still exit with non-zero, but now we'll finish the rest of the traversal. The tests that's being added here asserts that we'll still complain about other fsck issues (e.g. an unrelated dangling blob). To do this we need to pass down the "OBJECT_INFO_ALLOW_UNKNOWN_TYPE" flag from read_loose_object() through to parse_loose_header(). Since the read_loose_object() function is only used in builtin/fsck.c we can simply change it to accept a "struct object_info" (which contains the OBJECT_INFO_ALLOW_UNKNOWN_TYPE in its flags). See f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for the introduction of read_loose_object(). Since we'll need a "struct strbuf" to hold the "type_name" let's pass it to the for_each_loose_file_in_objdir() callback to avoid allocating a new one for each loose object in the iteration. It also makes the memory management simpler than sticking it in fsck_loose() itself, as we'll only need to strbuf_reset() it, with no need to do a strbuf_release() before each "return". Before this commit we'd never check the "type" if read_loose_object() failed, but now we do. We therefore need to initialize it to OBJ_NONE to be able to tell the difference between e.g. its unpack_loose_header() having failed, and us getting past that and into parse_loose_header(). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:52 +02:00
if (parse_loose_header(hdr, oi) < 0) {
error(_("unable to parse header of %s"), path);
git_inflate_end(&stream);
goto out;
}
fsck: don't hard die on invalid object types Change the error fsck emits on invalid object types, such as: $ git hash-object --stdin -w -t garbage --literally </dev/null <OID> From the very ungraceful error of: $ git fsck fatal: invalid object type $ To: $ git fsck error: <OID>: object is of unknown type 'garbage': <OID_PATH> [ other fsck output ] We'll still exit with non-zero, but now we'll finish the rest of the traversal. The tests that's being added here asserts that we'll still complain about other fsck issues (e.g. an unrelated dangling blob). To do this we need to pass down the "OBJECT_INFO_ALLOW_UNKNOWN_TYPE" flag from read_loose_object() through to parse_loose_header(). Since the read_loose_object() function is only used in builtin/fsck.c we can simply change it to accept a "struct object_info" (which contains the OBJECT_INFO_ALLOW_UNKNOWN_TYPE in its flags). See f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) for the introduction of read_loose_object(). Since we'll need a "struct strbuf" to hold the "type_name" let's pass it to the for_each_loose_file_in_objdir() callback to avoid allocating a new one for each loose object in the iteration. It also makes the memory management simpler than sticking it in fsck_loose() itself, as we'll only need to strbuf_reset() it, with no need to do a strbuf_release() before each "return". Before this commit we'd never check the "type" if read_loose_object() failed, but now we do. We therefore need to initialize it to OBJ_NONE to be able to tell the difference between e.g. its unpack_loose_header() having failed, and us getting past that and into parse_loose_header(). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-01 11:16:52 +02:00
if (*oi->typep == OBJ_BLOB && *size > big_file_threshold) {
if (check_stream_oid(&stream, hdr, *size, path, expected_oid) < 0)
goto out;
} else {
*contents = unpack_loose_rest(&stream, hdr, *size, expected_oid);
if (!*contents) {
error(_("unable to unpack contents of %s"), path);
git_inflate_end(&stream);
goto out;
}
hash_object_file_literally(the_repository->hash_algo,
object-file: free(*contents) only in read_loose_object() caller In the preceding commit a free() of uninitialized memory regression in 96e41f58fe1 (fsck: report invalid object type-path combinations, 2021-10-01) was fixed, but we'd still have an issue with leaking memory from fsck_loose(). Let's fix that issue too. That issue was introduced in my 31deb28f5e0 (fsck: don't hard die on invalid object types, 2021-10-01). It can be reproduced under SANITIZE=leak with the test I added in 093fffdfbec (fsck tests: add test for fsck-ing an unknown type, 2021-10-01): ./t1450-fsck.sh --run=84 -vixd In some sense it's not a problem, we lost the same amount of memory in terms of things malloc'd and not free'd. It just moved from the "still reachable" to "definitely lost" column in valgrind(1) nomenclature[1], since we'd have die()'d before. But now that we don't hard die() anymore in the library let's properly free() it. Doing so makes this code much easier to follow, since we'll now have one function owning the freeing of the "contents" variable, not two. For context on that memory management pattern the read_loose_object() function was added in f6371f92104 (sha1_file: add read_loose_object() function, 2017-01-13) and subsequently used in c68b489e564 (fsck: parse loose object paths directly, 2017-01-13). The pattern of it being the task of both sides to free() the memory has been there in this form since its inception. 1. https://valgrind.org/docs/manual/mc-manual.html#mc-manual.leaks Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-11-11 06:18:56 +01:00
*contents, *size,
oi->type_name->buf, real_oid);
if (!oideq(expected_oid, real_oid))
goto out;
}
ret = 0; /* everything checks out */
out:
if (map)
munmap(map, mapsize);
return ret;
}