Because we run the tests via "prove", the output from
"--verbose" may interfere with our TAP output. Using
"--verbose-log" solves this while letting us retain our
on-disk log.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--verbose" option redirects output from arbitrary
test commands to stdout. This is useful for examining the
output manually, like:
./t5547-push-quarantine.sh -v | less
But it also means that the output is intermingled with the
TAP directives, which can confuse a TAP parser like "prove".
This has always been a potential problem, but became an
issue recently when one test happened to output the word
"ok" on a line by itself, which prove interprets as a test
success:
$ prove t5547-push-quarantine.sh :: -v
t5547-push-quarantine.sh .. 1/? To dest.git
* [new branch] HEAD -> master
To dest.git
! [remote rejected] reject -> reject (pre-receive hook declined)
error: failed to push some refs to 'dest.git'
fatal: git cat-file d08c8eba97f4e683ece08654c7c8d2ba0c03b129: bad file
t5547-push-quarantine.sh .. Failed -1/4 subtests
Test Summary Report
-------------------
t5547-push-quarantine.sh (Wstat: 0 Tests: 5 Failed: 0)
Parse errors: Tests out of sequence. Found (2) but expected (3)
Tests out of sequence. Found (3) but expected (4)
Tests out of sequence. Found (4) but expected (5)
Bad plan. You planned 4 tests but ran 5.
Files=1, Tests=5, 0 wallclock secs ( 0.01 usr + 0.01 sys = 0.02 CPU)
Result: FAIL
One answer is "if it hurts, don't do it", but that's not
quite the whole story. The Travis tests use "--verbose
--tee" so that they can get the benefit of prove's parallel
options, along with a verbose log in case there is a
failure. We just need the verbose output to go to the log,
but keep stdout clean.
Getting this right turns out to be surprisingly difficult.
Here's the progression of alternatives I considered:
1. Add an option to write verbose output to stderr. This is
hard to capture, though, because we want each test to
have its own log (because they're all run in parallel
and the jumbled output would be useless).
2. Add an option to write verbose output to a file in
test-results. This works, but the log is missing all of
the non-verbose output, which gives context.
3. Like (2), but teach say_color() to additionally output
to the log. This mostly works, but misses any output
that happens outside of the say() functions (which isn't
a lot, but is a potential maintenance headache).
4. Like (2), but make the log file the same as the "--tee"
file. That almost works, but now we have two processes
opening the same file. That gives us two separate
descriptors, each with their own idea of the current
position. They'll each start writing at offset 0, and
overwrite each other's data.
5. Like (4), but in each case open the file for appending.
That atomically positions each write at the end of the
file.
It's possible we may still get sheared writes between
the two processes, but this is already the case when
writing to stdout. It's not a problem in practice
because the test harness generally waits for snippets to
finish before writing the TAP output.
We can ignore buffering issues with tee, because POSIX
mandates that it does not buffer. Likewise, POSIX
specifies "tee -a", so it should be available
everywhere.
This patch implements option (5), which seems to work well
in practice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are careful in test_done to handle a results directory
with a space in it, but the "--tee" code path does not.
Doing:
export TEST_OUTPUT_DIRECTORY='/tmp/path with spaces'
./t000-init.sh --tee
results in errors. Let's consistently double-quote our path
variables so that this works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "are we talking with TTY, doing an interactive session?"
detection has been updated to work better for "Git for Windows".
* kb/msys2-tty:
mingw: make isatty() recognize MSYS2's pseudo terminals (/dev/pty*)
A couple of bugs around core.autocrlf have been fixed.
* tb/core-eol-fix:
convert.c: ident + core.autocrlf didn't work
t0027: test cases for combined attributes
convert: allow core.autocrlf=input and core.eol=crlf
t0027: make commit_chk_wrnNNO() reliable
Many commands normalize command line arguments from NFD to NFC
variant of UTF-8 on OSX, but commands in the "diff" family did
not, causing "git diff $path" to complain that no such path is
known to Git. They have been taught to do the normalization.
* ar/diff-args-osx-precompose:
diff: run arguments through precompose_argv
Correct faulty recommendation to use "git submodule deinit ." when
de-initialising all submodules, which would result in a strange
error message in a pathological corner case.
* sb/submodule-deinit-all:
submodule deinit: require '--all' instead of '.' for all submodules
"http.cookieFile" configuration variable clearly wants a pathname,
but we forgot to treat it as such by e.g. applying tilde expansion.
* bn/http-cookiefile-config:
http: expand http.cookieFile as a path
Documentation: config: improve word ordering for http.cookieFile
Running tests with '-x' option to trace the individual command
executions is a useful way to debug test scripts, but some tests
that capture the standard error stream and check what the command
said can be broken with the trace output mixed in. When running
our tests under "bash", however, we can redirect the trace output
to another file descriptor to keep the standard error of programs
being tested intact.
* jk/test-send-sh-x-trace-elsewhere:
test-lib: set BASH_XTRACEFD automatically
"git describe --contains" often made a hard-to-justify choice of
tag to give name to a given commit, because it tried to come up
with a name with smallest number of hops from a tag, causing an old
commit whose close descendant that is recently tagged were not
described with respect to an old tag but with a newer tag. It did
not help that its computation of "hop" count was further tweaked to
penalize being on a side branch of a merge. The logic has been
updated to favor using the tag with the oldest tagger date, which
is a lot easier to explain to the end users: "We describe a commit
in terms of the (chronologically) oldest tag that contains the
commit."
* js/name-rev-use-oldest-ref:
name-rev: include taggerdate in considering the best name
"git fsck" learned to catch NUL byte in a commit object as
potential error and warn.
* jc/fsck-nul-in-commit:
fsck: detect and warn a commit with embedded NUL
fsck_commit_buffer(): do not special case the last validation
Portability enhancement for "rebase -i" to help platforms whose
shell does not like "for i in <empty>" (which is not POSIX-kosher).
* jk/rebase-interative-eval-fix:
rebase--interactive: avoid empty list in shell for-loop
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
Documentation for "git merge --verify-signatures" has been updated
to clarify that the signature of only the commit at the tip is
verified. Also the phrasing used for signature and key validity is
adjusted to align with that used by OpenPGP.
* kf/gpg-sig-verification-doc:
Documentation: clarify signature verification
Mark several messages for translation.
* va/i18n-misc-updates:
i18n: unpack-trees: avoid substituting only a verb in sentences
i18n: builtin/pull.c: split strings marked for translation
i18n: builtin/pull.c: mark placeholders for translation
i18n: git-parse-remote.sh: mark strings for translation
i18n: branch: move comment for translators
i18n: branch: unmark string for translation
i18n: builtin/rm.c: remove a comma ',' from string
i18n: unpack-trees: mark strings for translation
i18n: builtin/branch.c: mark option for translation
i18n: index-pack: use plural string instead of normal one
MSYS2 emulates pseudo terminals via named pipes, and isatty() returns 0
for such file descriptors. Therefore, some interactive functionality
(such as launching a pager, asking if a failed unlink should be repeated
etc.) doesn't work when run in a terminal emulator that uses MSYS2's
ptys (such as mintty).
However, MSYS2 uses special names for its pty pipes ('msys-*-pty*'),
which allows us to distinguish them from normal piped input / output.
On startup, check if stdin / stdout / stderr are connected to such pipes
using the NtQueryObject API from NTDll.dll. If the names match, adjust
the flags in MSVCRT's ioinfo structure accordingly.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f2f0267 (archive-tar: use xsnprintf for trivial
formatting, 2015-09-24) converted cases of "sprintf" to
"xsnprintf", but accidentally left one as just "snprintf".
This meant that we could silently truncate the resulting
buffer instead of flagging an error.
In practice, this is impossible to achieve, as we are
formatting a ustar checksum, which can be at most 7
characters. But the point of xsnprintf is to document and
check for "should be impossible" conditions; this site was
just accidentally mis-converted during f2f0267.
Noticed-by: Paul Green <Paul.Green@stratus.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/misc-cleanups:
submodule-config: don't shadow `cache`
config.c: drop local variable
credential-cache, send_request: close fd when done
bundle: don't leak an fd in case of early return
abbrev_sha1_in_line: don't leak memory
notes: don't leak memory in git_config_get_notes_strategy
Some multi-byte encoding can have a backslash byte as a later part
of one letter, which would confuse "highlight" filter used in
gitweb.
* sk/gitweb-highlight-encoding:
gitweb: apply fallback encoding before highlight
Recent update to Git LFS broke "git p4" by changing the output from
its "lfs pointer" subcommand.
* ls/p4-lfs:
git-p4: fix Git LFS pointer parsing
travis-ci: express Linux/OS X dependency versions more clearly
travis-ci: update Git-LFS and P4 to the latest version
