The function takes two counted strings (<basename, basenamelen> and
<pattern, patternlen>) as parameters, together with prefix (the
length of the prefix in pattern that is to be matched literally
without globbing against the basename) and EXC_* flags that tells it
how to match the pattern against the basename.
However, it did not pay attention to the length of these counted
strings. Update them to do the following:
* When the entire pattern is to be matched literally, the pattern
matches the basename only when the lengths of them are the same,
and they match up to that length.
* When the pattern is "*" followed by a string to be matched
literally, make sure that the basenamelen is equal or longer than
the "literal" part of the pattern, and the tail of the basename
string matches that literal part.
* Otherwise, use the new fnmatch_icase_mem helper to make
sure we only lookmake sure we use only look at the
counted part of the strings. Because these counted strings are
full strings most of the time, we check for termination
to avoid unnecessary allocation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is given a string that ends with a slash to signal that
the path is a directory to make sure that a pattern that ends with a
slash (i.e. MUSTBEDIR) can tell directories and non-directories
apart. However, the pattern itself (pat->pattern and
pat->patternlen) that came from such a MUSTBEDIR pattern is
represented as a string that ends with a slash, but patternlen does
not count that trailing slash. A MUSTBEDIR pattern "element/" is
represented as a counted string <"element/", 7> and this must match
match pathname "element/".
Because match_basename() and match_pathname() want to see pathname
"element" to match against the pattern <"element/", 7>, reduce the
length of the path to exclude the trailing slash when calling
these functions.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function takes two strings (pathname and basename) as if they
are independent strings, but in reality, the latter is always
pointing into a substring in the former.
Clarify this relationship by expressing the latter as an offset into
the former.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_basename() is only used inside collect_all_attrs(), called once
in prepare_attr_stack, then again after prepare_attr_stack()
returns. Both calls return exact same value. Reorder the code to do
the same task once. Also avoid strlen() because we knows the length
after finding basename.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
94bc671 (Add directory pattern matching to attributes - 2012-12-08)
uses find_basename() to calculate the length of directory part in
prepare_attr_stack. This function expects the directory without the
trailing slash (as "origin" field in match_attr struct is without the
trailing slash). find_basename() includes the trailing slash and
confuses push/pop algorithm.
Consider path = "abc/def" and the push down code:
while (1) {
len = strlen(attr_stack->origin);
if (dirlen <= len)
break;
cp = memchr(path + len + 1, '/', dirlen - len - 1);
if (!cp)
cp = path + dirlen;
dirlen is 4, not 3, without this patch. So when attr_stack->origin is
"abc", it'll miss the exit condition because 4 <= 3 is wrong. It'll
then try to push "abc/" down the attr stack (because "cp" would be
NULL). So we have both "abc" and "abc/" in the stack.
Next time when "abc/ghi" is checked, "abc/" is popped out because of
the off-by-one dirlen, only to be pushed back in again by the above
code. This repeats for all files in the same directory. Which means
at least one failed open syscall per file, or more if .gitattributes
exists.
This is the perf result with 10 runs on git.git:
Test 94bc671^ 94bc671 HEAD
----------------------------------------------------------------------------------------------------------
7810.1: grep worktree, cheap regex 0.02(0.01+0.04) 0.05(0.03+0.05) +150.0% 0.02(0.01+0.04) +0.0%
7810.2: grep worktree, expensive regex 0.25(0.94+0.01) 0.26(0.94+0.02) +4.0% 0.25(0.93+0.02) +0.0%
7810.3: grep --cached, cheap regex 0.11(0.10+0.00) 0.12(0.10+0.02) +9.1% 0.10(0.10+0.00) -9.1%
7810.4: grep --cached, expensive regex 0.61(0.60+0.01) 0.62(0.61+0.01) +1.6% 0.61(0.60+0.00) +0.0%
Reported-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manpage of gitattributes says: "The rules how the pattern
matches paths are the same as in .gitignore files" and the gitignore
pattern matching has a pattern ending with / for directory matching.
This rule is specifically relevant for the 'export-ignore' rule used
for git archive.
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of __git_ps1 function operating in two-arg mode was
not very clear. It said "set PROMPT_COMMAND=__git_ps1" which is not
the right usage for this mode, followed by "To customize the prompt,
do this", giving a false impression that those who do not want to
customize it can get away with no-arg form, which was incorrect.
Make it clear that this mode always takes two arguments, pre and
post, with an example.
The straight-forward one should be listed as the primary usage, and
the confusing one should be an alternate for advanced users. Swap
the order of these two.
Acked-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For bash completion, the option '-o bashdefault' is used to indicate
that when no other choices are available, file completion should be
performed. Since this option is not available in tcsh, no file
completion is ever performed. Therefore, commands like 'git add ',
'git send-email ', etc, require the user to manually type out
the file name. This can be quite annoying.
To improve the user experience we try to simulate file completion
directly in this script (although not perfectly).
The known issues with the file completion simulation are:
- Possible completions are shown with their directory prefix.
- Completions containing shell variables are not handled.
- Completions with ~ as the first character are not handled.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW has a workaround when rmdir unnecessarily fails to retry with
a prompt, but the logic was kicking in when the rmdir failed with
ENOTEMPTY, i.e. was expected to fail and there is no point retrying.
* ef/mingw-rmdir:
mingw_rmdir: do not prompt for retry when non-empty
Update getpass() emulation for MinGW.
* ef/mingw-tty-getpass:
mingw: get rid of getpass implementation
mingw: reuse tty-version of git_terminal_prompt
compat/terminal: separate input and output handles
compat/terminal: factor out echo-disabling
mingw: make fgetc raise SIGINT if apropriate
mingw: correct exit-code for SIGALRM's SIG_DFL
GIT_PS1_DESCRIBE_STYLE was introduced in v1.6.3.2~35. Document it in the
header comments.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.8.0.2
Documentation/git-stash.txt: add a missing verb
git(1): remove a defunct link to "list of authors"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently use a single space before and after the "=" (or ":=", "+=",
etc.) in assignments to make macros. Granted, this was not a big deal,
but I did find the needless inconsistency quite distracting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
in ab1a11be ("mingw_rmdir: set errno=ENOTEMPTY when appropriate"),
a check was added to prevent us from retrying to delete a directory
that is both in use and non-empty.
However, this logic was slightly flawed; since we didn't return
immediately, we end up falling out of the retry-loop, but right into
the prompting-loop.
Fix this by setting errno, and guarding the prompting-loop with an
errno-check.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The linked page has not been showing the promised "more complete
list" for more than 6 months by now, and nobody has resurrected
the list there nor elsewhere since then.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line that happens to begin with indent followed by "3. " was
interpreted as if it was an enumerated list; just wrap the lines
differently to work it around for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
"git diff --stat" miscounted the total number of changed lines when
binary files were involved and hidden beyond --stat-count. It also
miscounted the total number of changed files when there were
unmerged paths.
* lt/diff-stat-show-0-lines:
t4049: refocus tests
diff --shortstat: do not count "unmerged" entries
diff --stat: do not count "unmerged" entries
diff --stat: move the "total count" logic to the last loop
diff --stat: use "file" temporary variable to refer to data->files[i]
diff --stat: status of unmodified pair in diff-q is not zero
test: add failing tests for "diff --stat" to t4049
Fix "git diff --stat" for interesting - but empty - file changes
Translate 825 new messages came from git.pot update in
cc76011 ("l10n: Update git.pot (825 new, 24 removed messages)").
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Thomas Rast <trast@student.ethz.ch>
Helped-by: Michael J Gruber <git@drmicha.warpmail.net>
There's no remaining call-sites, and as pointed out in the
previous commit message, it's not quite ideal. So let's just
lose it.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The getpass-implementation we use on Windows isn't at all ideal;
it works in raw-mode (as opposed to cooked mode), and as a result
does not deal correcly with deletion, arrow-keys etc.
Instead, use cooked mode to read a line at the time, allowing the
C run-time to process the input properly.
Since we set files to be opened in binary-mode by default on
Windows, introduce a FORCE_TEXT macro that expands to the "t"
modifier that forces the terminal to be opened in text-mode so we
do not have to deal with CRLF issues.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the terminal cannot be opened in read-write mode, so
we need distinct pairs for reading and writing. Since this works
fine on other platforms as well, always open them in pairs.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By moving the echo-disabling code to a separate function, we can
implement OS-specific versions of it for non-POSIX platforms.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set a control-handler to prevent the process from terminating, and
simulate SIGINT so it can be handled by a signal-handler as usual.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure SIG_DFL for SIGALRM exits with 128 + SIGALRM so other
processes can diagnose why it exits.
While we're at it, make sure we only write to stderr if it's a
terminal, and change the output to match that of Linux.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touch to allow the new advice message squelched
with an advice.* configuration variable.
* mm/status-push-pull-advise:
status: respect advice.statusHints for ahead/behind advice
If the user has unset advice.statusHints, we already
suppress the "use git reset to..." hints in each stanza. The
new "use git push to publish..." hint is the same type of
hint. Let's respect statusHints for it, rather than making
the user set yet another advice flag.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Enclose tests in single quotes as opposed to double quotes. This is
the prevalent style in other tests.
- Remove the unused variable $head4_full.
- Indent the expected output so that it lines up with the rest of the
test text.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "cd there and then come back", use the "cd there in a
subshell" pattern. Also fix '&&' chaining in one place.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rev-list --max-count=1 HEAD` is a roundabout way of saying `git
rev-parse --verify HEAD`; replace a bunch of instances of the former
with the latter. Also, don't unnecessarily `cut -c1-7` the rev-parse
output when the `--short` option is available.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
