Set up all the needed client parts of the 'bundle-uri' protocol v2
command, without actually doing anything with the bundle URIs.
If the server says it supports 'bundle-uri' teach Git to issue the
'bundle-uri' command after the 'ls-refs' during 'git clone'. The
returned key=value pairs are passed to the bundle list code which is
tested using a different ingest mechanism in t5750-bundle-uri-parse.sh.
At this point, Git does nothing with that bundle list. It will not
download any of the bundles. That will come in a later change after
these protocol bits are finalized.
The no-op client is initially used only by 'git clone' to test the basic
functionality, and eventually will bootstrap the initial download of Git
objects during a fresh clone. The bundle URI client will not be
integrated into other fetches until a mechanism is created to select a
subset of bundles for download.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change allowed for a Git server to advertise the
'bundle-uri' command as a capability based on the
uploadPack.advertiseBundleURIs config option. Create a set of tests that
check that this capability is advertised using 'git ls-remote'.
In order to test this functionality across three protocols (file, git,
and http), create lib-bundle-uri-protocol.sh to generalize the tests,
allowing the other test scripts to set an environment variable and
otherwise inherit the setup and tests from this script.
The tests currently only test that the 'bundle-uri' command is
advertised or not. Other actions will be tested as the Git client learns
to request the 'bundle-uri' command and parse its response.
To help with URI escaping, specifically for file paths with a space in
them, extract a 'sed' invocation from t9199-git-svn-info.sh into a
helper function for use here, too.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a skeleton server-side implementation of a new "bundle-uri" command
to protocol v2. This will allow conforming clients to optionally seed
their initial clones or incremental fetches from URLs containing
"*.bundle" files created with "git bundle create".
This change only performs the basic boilerplate of advertising a new
protocol v2 capability. The new 'bundle-uri' capability allows a client
to request a list of bundles. Right now, the server only returns a flush
packet, which corresponds to an empty advertisement. The bundle.* config
namespace describes which key-value pairs will be communicated across
this interface in future updates.
The critical bit right now is that the new boolean
uploadPack.adverstiseBundleURIs config value signals whether or not this
capability should be advertised at all.
An earlier version of this patch [1] used a different transfer format
than the "key=value" pairs in the current implementation. The change was
made to unify the protocol v2 command with the bundle lists provided by
independent bundle servers. Further, the standard allows for the server
to advertise a URI that contains a bundle list. This allows users
automatically discovering bundle providers that are loosely associated
with the origin server, but without the origin server knowing exactly
which bundles are currently available.
[1] https://lore.kernel.org/git/RFC-patch-v2-01.13-2fc87ce092b-20220311T155841Z-avarab@gmail.com/
The very-deep headings needed to be modified to stop at level 4 due to
documentation build issues. These were not recognized in earlier builds
since the file was previously in the Documentation/technical/ directory
and was built in a different way. With its current location, the
heavily-nested details were causing build issues and they are now
replaced with a bulletted list of details.
Co-authored-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add trace2 counters to the region to clear skip worktree bits in a
sparse checkout.
* al/trace2-clearing-skip-worktree:
index: raise a bug if the index is materialised more than once
index: add trace2 region for clear skip worktree
Remotes are considered "promisor" if extensions.partialClone and some
other configuration variables are set. The casing for this in
Documentation/technical/repository-version.txt is not proper and may
cause confusion. This change corrects this casing.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Simplify the run-command API.
* rs/no-more-run-command-v:
replace and remove run_command_v_opt()
replace and remove run_command_v_opt_cd_env_tr2()
replace and remove run_command_v_opt_tr2()
replace and remove run_command_v_opt_cd_env()
use child_process members "args" and "env" directly
use child_process member "args" instead of string array variable
sequencer: simplify building argument list in do_exec()
bisect--helper: factor out do_bisect_run()
bisect: simplify building "checkout" argument list
am: simplify building "show" argument list
run-command: fix return value comment
merge: remove always-the-same "verbose" arguments
"git archive" mistakenly complained twice about a missing executable,
which has been corrected.
* rs/archive-filter-error-once:
archive-tar: report filter start error only once
A redundant diagnostic message is dropped from test_path_is_missing().
* ma/drop-redundant-diagnostic:
test-lib-functions: drop redundant diagnostic print
Various tests exercising the transfer.credentialsInUrl configuration
are taught to avoid making requests which require resolving localhost
to reduce CI-flakiness.
* jk/ref-filter-parsing-bugs:
ref-filter: fix parsing of signatures with CRLF and no body
ref-filter: fix parsing of signatures without blank lines
The glossary entries for "commit-graph file" and "reachability
bitmap" have been added.
* po/glossary-around-traversal:
glossary: add reachability bitmap description
glossary: add "commit graph" description
doc: use 'object database' not ODB or abbreviation
doc: use "commit-graph" hyphenation consistently
The adjust_shared_perm() helper function learned to refrain from
setting the "g+s" bit on directories when it is not necessary.
* jc/set-gid-bit-less-aggressively:
adjust_shared_perm(): leave g+s alone when the group does not matter
Enable gc.cruftpacks by default for those who opt into
feature.experimental setting.
* es/mark-gc-cruft-as-experimental:
config: let feature.experimental imply gc.cruftPacks=true
gc: add tests for --cruft and friends
Git asks for a "password", but the user might use a
personal access token or OAuth access token instead.
Example:
Password for 'https://AzureDiamond@github.com':
Signed-off-by: M Hickford <mirth.hickford@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Have the REV_INFO_INIT macro added in [1] declare more members of
"struct rev_info" that we can initialize statically, and have
repo_init_revisions() do so with the memcpy(..., &blank) idiom
introduced in [2].
As the comment for the "REV_INFO_INIT" macro notes this still isn't
sufficient to initialize a "struct rev_info" for use yet. But we are
getting closer to that eventual goal.
Even though we can't fully initialize a "struct rev_info" with
REV_INFO_INIT it's useful for readability to clearly separate those
things that we can statically initialize, and those that we can't.
This change could replace the:
list_objects_filter_init(&revs->filter);
In the repo_init_revisions() with this line, at the end of the
REV_INFO_INIT deceleration in revisions.h:
.filter = LIST_OBJECTS_FILTER_INIT, \
But doing so would produce a minor conflict with an outstanding
topic[3]. Let's skip that for now. I have follow-ups to initialize
more of this statically, e.g. changes to get rid of grep_init(). We
can initialize more members with the macro in a future series.
1. f196c1e908 (revisions API users: use release_revisions() needing
REV_INFO_INIT, 2022-04-13)
2. 5726a6b401 (*.c *_init(): define in terms of corresponding *_INIT
macro, 2021-07-01)
3. https://lore.kernel.org/git/265b292ed5c2de19b7118dfe046d3d9d932e2e89.1667901510.git.ps@pks.im/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
The old version we currently use runs in node.js v12.x, which is being
deprecated in GitHub Actions. The new version uses node.js v16.x.
Incidentally, this also avoids the warning about the deprecated
`::set-output::` workflow command because the newer version of the
`github-script` Action uses the recommended new way to specify outputs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
If clear_skip_worktree_from_present_files() encounter a sparse directory,
it fully materialise the index which should expand any sparse directories
and start going through each entries again. If this happens more than once,
raise it with a BUG.
Signed-off-by: Anh Le <anh@canva.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When using sparse checkout, clear_skip_worktree_from_present_files() must
enumerate index entries to find ones with the SKIP_WORKTREE bit to
determine whether those index entries exist on disk (in which case their
SKIP_WORKTREE bit should be removed).
In a large repository, this may take considerable time depending on the
size of the index.
Add a trace2 region to surface this information, keeping a count of how
many paths have been checked. Separately, keep counts after a full index is
materialized.
Signed-off-by: Anh Le <anh@canva.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Test script to verify the presence/absence of files, paths, directories,
symlinks and other features in 'git mv' command are using the command
format:
'test (-e|f|d|h|...)'
Replace them with helper functions of format:
'test_path_is_*'
Replacing idiomatic helper functions:
'! test_path_is_*'
with
'test_path_is_missing'
This uses values of 'test_path_bar' in place of '! test_path_foo' to
bring in the helpful factor of indicating the failure of tests after the
mv command has been used, that is, it echoes if the feature/test_path
exists.
Signed-off-by: Debra Obondo <debraobondo@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Various tests exercising the transfer.credentialsInUrl configuration
are taught to avoid making requests which require resolving localhost
to reduce CI-flakiness.
* jk/avoid-localhost:
t5516/t5601: be less strict about the number of credential warnings
t5516: move plaintext-password tests from t5601 and t5516
This commit fixes a bug when parsing tags that have CRLF line endings, a
signature, and no body, like this (the "^M" are marking the CRs):
this is the subject^M
-----BEGIN PGP SIGNATURE-----^M
^M
...some stuff...^M
-----END PGP SIGNATURE-----^M
When trying to find the start of the body, we look for a blank line
separating the subject and body. In this case, there isn't one. But we
search for it using strstr(), which will find the blank line in the
signature.
In the non-CRLF code path, we check whether the line we found is past
the start of the signature, and if so, put the body pointer at the start
of the signature (effectively making the body empty). But the CRLF code
path doesn't catch the same case, and we end up with the body pointer in
the middle of the signature field. This has two visible problems:
- printing %(contents:subject) will show part of the signature, too,
since the subject length is computed as (body - subject)
- the length of the body is (sig - body), which makes it negative.
Asking for %(contents:body) causes us to cast this to a very large
size_t when we feed it to xmemdupz(), which then complains about
trying to allocate too much memory.
These are essentially the same bugs fixed in the previous commit, except
that they happen when there is a CRLF blank line in the signature,
rather than no blank line at all. Both are caused by the refactoring in
9f75ce3d8f (ref-filter: handle CRLF at end-of-line more gracefully,
2020-10-29).
We can fix this by doing the same "sigstart" check that we do in the
non-CRLF case. And rather than repeat ourselves, we can just use
short-circuiting OR to collapse both cases into a single conditional.
I.e., rather than:
if (strstr("\n\n"))
...found blank, check if it's in signature...
else if (strstr("\r\n\r\n"))
...found blank, check if it's in signature...
else
...no blank line found...
we can collapse this to:
if (strstr("\n\n")) ||
strstr("\r\n\r\n")))
...found blank, check if it's in signature...
else
...no blank line found...
The tests show the problem and the fix. Though it wasn't broken, I
included contents:signature here to make sure it still behaves as
expected, but note the shell hackery needed to make it work. A
less-clever option would be to skip using test_atom and just "append_cr
>expected" ourselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
When ref-filter is asked to show %(content:subject), etc, we end up in
find_subpos() to parse out the three major parts: the subject, the body,
and the signature (if any).
When searching for the blank line between the subject and body, if we
don't find anything, we try to treat the whole message as the subject,
with no body. But our idea of "the whole message" needs to take into
account the signature, too. Since 9f75ce3d8f (ref-filter: handle CRLF at
end-of-line more gracefully, 2020-10-29), the code instead goes all the
way to the end of the buffer, which produces confusing output.
Here's an example. If we have a tag message like this:
this is the subject
-----BEGIN SSH SIGNATURE-----
...some stuff...
-----END SSH SIGNATURE-----
then the current parser will put the start of the body at the end of the
whole buffer. This produces two buggy outcomes:
- since the subject length is computed as (body - subject), showing
%(contents:subject) will print both the subject and the signature,
rather than just the single line
- since the body length is computed as (sig - body), and the body now
starts _after_ the signature, we end up with a negative length!
Fortunately we never access out-of-bounds memory, because the
negative length is fed to xmemdupz(), which casts it to a size_t,
and xmalloc() bails trying to allocate an absurdly large value.
In theory it would be possible for somebody making a malicious tag
to wrap it around to a more reasonable value, but it would require a
tag on the order of 2^63 bytes. And even if they did, all they get
is an out of bounds string read. So the security implications are
probably not interesting.
We can fix both by correctly putting the start of the body at the same
index as the start of the signature (effectively making the body empty).
Note that this is a real issue with signatures generated with gpg.format
set to "ssh", which would look like the example above. In the new tests
here I use a hard-coded tag message, for a few reasons:
- regardless of what the ssh-signing code produces now or in the
future, we should be testing this particular case
- skipping the actual signature makes the tests simpler to write (and
allows them to run on more systems)
- t6300 has helpers for working with gpg signatures; for the purposes
of this bug, "BEGIN PGP" is just as good a demonstration, and this
simplifies the tests
Curiously, the same issue doesn't happen with real gpg signatures (and
there are even existing tests in t6300 with cover this). Those have a
blank line between the header and the content, like:
this is the subject
-----BEGIN PGP SIGNATURE-----
...some stuff...
-----END PGP SIGNATURE-----
Because we search for the subject/body separator line with a strstr(),
we find the blank line in the signature, even though it's outside of
what we'd consider the body. But that puts us unto a separate code path,
which realizes that we're now in the signature and adjusts the line back
to "sigstart". So this patch is basically just making the "no line found
at all" case match that. And note that "sigstart" is always defined (if
there is no signature, it points to the end of the buffer as you'd
expect).
Reported-by: Martin Englund <martin@englund.nu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
It is unclear as to _why_, but under certain circumstances the warning
about credentials being passed as part of the URL seems to be swallowed
by the `git remote-https` helper in the Windows jobs of Git's CI builds.
Since it is not actually important how many times Git prints the
warning/error message, as long as it prints it at least once, let's just
make the test a bit more lenient and test for the latter instead of the
former, which works around these CI issues.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Commit 6dcbdc0d66 (remote: create fetch.credentialsInUrl config,
2022-06-06) added tests for our handling of passwords in URLs. Since the
obvious URL to be affected is git-over-http, the tests use http. However
they don't set up a test server; they just try to access
https://localhost, assuming it will fail (because the nothing is
listening there).
This causes some possible problems:
- There might be a web server running on localhost, and we do not
actually want to connect to that.
- The DNS resolver, or the local firewall, might take a substantial
amount of time (or forever, whichever comes first) to fail to
connect, slowing down the tests cases unnecessarily.
- Since there's no server, our tests for "allow" and "warn" still
expect the clone/fetch/push operations to fail, even though in the
real world we'd expect these to succeed. We scrape stderr to see
what happened, but it's not as robust as a more realistic test.
Let's instead move these to t5551, which is all about testing http and
where we have a real server. That eliminates any issues with contacting
a strange URL, and lets the "allow" and "warn" tests confirm that the
operation actually succeeds.
It's not quite a verbatim move for a few reasons:
- we can drop the LIBCURL dependency; it's already part of
lib-httpd.sh
- we'll use HTTPD_URL_USER_PASS, etc, instead of our fake URL. To
avoid repetition, we'll add a few extra variables.
- the "https://username:@localhost" test uses a funny URL that
lib-httpd.sh doesn't provide. We'll similarly construct it in a
variable. Note that we're hard-coding the lib-httpd username here,
but t5551 already does that everywhere.
- for the "domain:port" test, the URL provided by lib-httpd is fine,
since our test server will always be on an exotic port. But we'll
confirm in the test that this is so.
- since our message-matching is done via grep, I simplified it to use
a regex, rather than trying to massage lib-httpd's variables.
Arguably this makes it more readable, too, while retaining the bits
we care about: the fatal/warning distinction, the "uses plaintext"
message, and the fact that the password was redacted.
- we'll use the /auth/ path for the repo, which shows that we are
indeed making use of the auth information when needed.
- we'll also use /smart/; most of these tests could be done via /dumb/
in t5550, but setting up pushes there requires extra effort and
dependencies. The smart protocol is what most everyone is using
these days anyway.
This patch is my own, but I stole the analysis and a few bits of the
commit message from a patch by Johannes Schindelin.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
`test_path_is_missing` was introduced back in 2caf20c52b ("test-lib:
user-friendly alternatives to test [-d|-f|-e]", 2010-08-10). It took the
path that was supposed to be missing, as well as an optional "diagnosis"
that would be echoed if the path was found to be alive.
Commit 45a2686441 ("test-lib-functions: remove bug-inducing
"diagnostics" helper param", 2021-02-12) dropped this diagnostic
functionality from several `test_path_is_foo` helpers, but note how it
tweaked the README entry on `test_path_is_missing` without actually
adjusting its implementation.
Commit e7884b353b ("test-lib-functions: assert correct parameter count",
2021-02-12) then followed up by asserting that we get just a single
argument.
This history leaves us in a state where we assert that we have exactly
one argument, then go on to anyway check for arguments, echoing them
all. It's clear that we can simplify this code. We should also note that
we run `ls -ld "$1"`, so printing the filename a second time doesn't
really buy us anything. Thus, we can drop the whole `if` block as
redundant.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Rewrite a deep recursion in the skipping negotiator to use a loop
with on-heap prio queue to avoid stack wastage.
* jt/skipping-negotiator-wo-recursion:
negotiator/skipping: avoid stack overflow
"git merge-tree --stdin" is a new way to request a series of merges
and report the merge results.
* en/merge-tree-sequence:
merge-tree: support multiple batched merges with --stdin
merge-tree: update documentation for differences in -z output
Define the logical elements of a "bundle list", data structure to
store them in-core, format to transfer them, and code to parse
them.
* ds/bundle-uri-3:
bundle-uri: suppress stderr from remote-https
bundle-uri: quiet failed unbundlings
bundle: add flags to verify_bundle()
bundle-uri: fetch a list of bundles
bundle: properly clear all revision flags
bundle-uri: limit recursion depth for bundle lists
bundle-uri: parse bundle list in config format
bundle-uri: unit test "key=value" parsing
bundle-uri: create "key=value" line parsing
bundle-uri: create base key-value pair parsing
bundle-uri: create bundle_list struct and helpers
bundle-uri: use plain string in find_temp_filename()
"git branch --edit-description" can exit with status -1 which is
not a good practice; it learned to use 1 as everybody else instead.
* rj/branch-do-not-exit-with-minus-one-status:
branch: error code with --edit-description
The role the security mailing list plays in an embargoed release
has been documented.
* jr/embargoed-releases-doc:
embargoed releases: also describe the git-security list and the process
Merging a branch with directory renames into a branch that changes
the directory to a symlink was mishandled by the ort merge
strategy, which has been corrected.
* en/ort-dir-rename-and-symlink-fix:
merge-ort: fix bug with dir rename vs change dir to symlink
A bugfix to "git subtree" in its split and merge features.
* pb/subtree-split-and-merge-after-squashing-tag-fix:
subtree: fix split after annotated tag was squashed merged
subtree: fix squash merging after annotated tag was squashed merged
subtree: process 'git-subtree-split' trailer in separate function
subtree: use named variables instead of "$@" in cmd_pull
subtree: define a variable before its first use in 'find_latest_squash'
subtree: prefix die messages with 'fatal'
subtree: add 'die_incompatible_opt' function to reduce duplication
subtree: use 'git rev-parse --verify [--quiet]' for better error messages
test-lib-functions: mark 'test_commit' variables as 'local'
Fix some bugs in the reflog messages when rebasing and changes the
reflog messages of "rebase --apply" to match "rebase --merge" with
the aim of making the reflog easier to parse.
* pw/rebase-reflog-fixes:
rebase: cleanup action handling
rebase --abort: improve reflog message
rebase --apply: make reflog messages match rebase --merge
rebase --apply: respect GIT_REFLOG_ACTION
rebase --merge: fix reflog message after skipping
rebase --merge: fix reflog when continuing
t3406: rework rebase reflog tests
rebase --apply: remove duplicated code
"git rebase --keep-base" used to discard the commits that are
already cherry-picked to the upstream, even when "keep-base" meant
that the base, on top of which the history is being rebuilt, does
not yet include these cherry-picked commits. The --keep-base
option now implies --reapply-cherry-picks and --no-fork-point
options.
* pw/rebase-keep-base-fixes:
rebase --keep-base: imply --no-fork-point
rebase --keep-base: imply --reapply-cherry-picks
rebase: factor out branch_base calculation
rebase: rename merge_base to branch_base
rebase: store orig_head as a commit
rebase: be stricter when reading state files containing oids
t3416: set $EDITOR in subshell
t3416: tighten two tests
