An Gitweb installation that is a part of larger site can optionally
show extra links that point at the levels higher than the Gitweb
pages itself in the link hierarchy of pages.
* tf/gitweb-extra-breadcrumbs:
gitweb: allow extra breadcrumbs to prefix the trail
"log --format=" did not honor i18n.logoutputencoding configuration
and this attempts to fix it.
* as/log-output-encoding-in-user-format:
t4205 (log-pretty-formats): avoid using `sed`
t6006 (rev-list-format): add tests for "%b" and "%s" for the case i18n.commitEncoding is not set
t4205, t6006, t7102: make functions better readable
t4205 (log-pretty-formats): revert back single quotes
t4041, t4205, t6006, t7102: use iso8859-1 rather than iso-8859-1
t4205: replace .\+ with ..* in sed commands
pretty: --format output should honor logOutputEncoding
pretty: Add failing tests: --format output should honor logOutputEncoding
t4205 (log-pretty-formats): don't hardcode SHA-1 in expected outputs
t7102 (reset): don't hardcode SHA-1 in expected outputs
t6006 (rev-list-format): don't hardcode SHA-1 in expected outputs
The document says one cannot push from a shallow clone. But that is
not true (maybe it was at some point in the past). The client does not
stop such a push nor does it give any indication to the receiver that
this is a shallow push. If the receiver accepts it, it's in.
Since 52fed6e (receive-pack: check connectivity before concluding "git
push" - 2011-09-02), receive-pack is prepared to deal with broken
push, a shallow push can't cause any corruption. Update the document
to reflect that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test that should have failed but didn't revealed a bug that needs
to be corrected.
* jc/t1512-fix:
get_short_sha1(): correctly disambiguate type-limited abbreviation
t1512: correct leftover constants from earlier edition
"git stash save" is not just about "saving" the local changes, but
also is to restore the working tree state to that of HEAD. If you
changed a non-directory into a directory in the local change, you
may have untracked files in that directory, which have to be killed
while doing so, unless you run it with --include-untracked. Teach
the command to detect and error out before spreading the damage.
This needed a small fix to "ls-files --killed".
* pb/stash-refuse-to-kill:
git stash: avoid data loss when "git stash save" kills a directory
treat_directory(): do not declare submodules to be untracked
"git diff" refused to even show difference when core.safecrlf is
set to true (i.e. error out) and there are offending lines in the
working tree files.
* jc/maint-diff-core-safecrlf:
diff: demote core.safecrlf=true to core.safecrlf=warn
"git status" learned status.branch and status.short configuration
variables to use --branch and --short options by default (override
with --no-branch and --no-short options from the command line).
* jg/status-config:
status/commit: make sure --porcelain is not affected by user-facing config
commit: make it work with status.short
status: introduce status.branch to enable --branch by default
status: introduce status.short to enable --short by default
Invocations of "git checkout" used internally by "git rebase" were
counted as "checkout", and affected later "git checkout -" to the
the user to an unexpected place.
* rr/rebase-checkout-reflog:
checkout: respect GIT_REFLOG_ACTION
status: do not depend on rebase reflog messages
t/t2021-checkout-last: "checkout -" should work after a rebase finishes
wt-status: remove unused field in grab_1st_switch_cbdata
t7512: test "detached from" as well
Earlier remote.pushdefault (and per-branch branch.*.pushremote)
were introduced as an additional mechanism to choose what
repository to push into when "git push" did not say it from the
command line, to help people who push to a repository that is
different from where they fetch from. This attempts to finish that
topic by teaching the default mechanism to choose branch in the
remote repository to be updated by such a push.
The 'current', 'matching' and 'nothing' modes (specified by the
push.default configuration variable) extend to such a "triangular"
workflow naturally, but 'upstream' and 'simple' have to be updated.
. 'upstream' is about pushing back to update the branch in the
remote repository that the current branch fetches from and
integrates with, it errors out in a triangular workflow.
. 'simple' is meant to help new people by avoiding mistakes, and
will be the safe default in Git 2.0.
In a non-triangular workflow, it will continue to act as a cross
between 'upstream' and 'current' in that it pushes to the current
branch's @{upstream} only when it is set to the same name as the
current branch (e.g. your 'master' forks from the 'master' from
the central repository).
In a triangular workflow, this series tentatively defines it as
the same as 'current', but we may have to tighten it to avoid
surprises in some way.
* jc/triangle-push-fixup:
t/t5528-push-default: test pushdefault workflows
t/t5528-push-default: generalize test_push_*
push: change `simple` to accommodate triangular workflows
config doc: rewrite push.default section
t/t5528-push-default: remove redundant test_config lines
Instead of using a hand-managed argument array, use argv-array API
to manage dynamically formulated command line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-pull learned the --rebase option it has not just been about
merging changes from a remote repository (where "merge" is in the sense
of "git merge"). Change the description to use "integrate" instead of
"merge" in order to reflect this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some shells do not understand the one-line construct, and instead need
FOO=bar &&
export FOO
Detect this in the test-lint target.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The == operator as an alias to = is not POSIX. This doesn't actually
matter for the execution of the script, because it only runs when the
shell is bash. However, it trips up test-lint, so it's nicer to use
the standard form.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y A=B" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With some workflows, it is more suitable to rebase on top of remote
changes when a push does not fast-forward. Change the advice messages
in git-push to suggest that a user "integrate the remote changes"
instead of "merge the remote changes" to make this slightly clearer.
Also change the suggested 'git pull' to 'git pull ...' to hint to users
that they may want to add other parameters.
Suggested-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to clarify which value is used when there are multiple values
defined for a key, re-order the list of file locations so that it runs
from least specific to most specific. Then add a paragraph which simply
says that the last value will be used.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path of the file to be locked is held in lock_file::filename,
which is a fixed-length buffer of length PATH_MAX. This buffer is
also (temporarily) used to hold the path of the lock file, which is
the path of the file being locked plus ".lock". Because of this, the
path of the file being locked must be less than (PATH_MAX - 5)
characters long (5 chars are needed for ".lock" and one character for
the NUL terminator).
On entry into lock_file(), the path length was only verified to be
less than PATH_MAX characters, not less than (PATH_MAX - 5)
characters.
When and if resolve_symlink() is called, then that function is
correctly told to treat the buffer as (PATH_MAX - 5) characters long.
This part is correct. However:
* If LOCK_NODEREF was specified, then resolve_symlink() is never
called.
* If resolve_symlink() is called but the path is not a symlink, then
the length check is never applied.
So it is possible for a path with length (PATH_MAX - 5 <= len <
PATH_MAX) to make it through the checks. When ".lock" is strcat()ted
to such a path, the lock_file::filename buffer is overflowed.
Fix the problem by adding a check when entering lock_file() that the
original path is less than (PATH_MAX - 5) characters.
[jc: with independent development by Peff]
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Halve the number of callsites of contains() to two using temporary
variables, simplifying the code. While at it, get rid of the
diff_options parameter, which became unused with 8fa4b09f.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default similarity index of 50% is documented in gitdiffcore(7)
but it is worth also mentioning it in the description of the
-M/--find-renames option.
Signed-off-by: Fraser Tweedale <frase@frase.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For testing truncated log messages 'commit_msg' function uses `sed` to
cut a message. On various platforms `sed` behaves differently and
results of its work depend on locales installed. So, avoid using `sed`.
Use predefined expected outputs instead of calculated ones.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In de6029a (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26) 'complex-subject' test was changed.
Revert it back, because that change actually removed tests for "%b"
and "%s" with i18n.commitEncoding set. Also, add two more tests for
mentioned above "%b" and "%s" to test encoding conversions with no
i18n.commitEncoding set.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function 'test_format' has become harder to read after its change in
de6029a2 (pretty: Add failing tests: --format output should honor
logOutputEncoding, 2013-06-26). Simplify it by moving its "should we
expect it to fail?" parameter to the end.
Note, current code does not use this last parameter as far as there
are no tests expected to fail. We can keep that for future use.
Also, reformat comments.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Improved-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In previuos commit de6029a (pretty: Add failing tests: --format output
should honor logOutputEncoding, 2013-06-26) single quotes were replaced
with double quotes to make "$(commit_msg)" expression in heredoc to
work. The same effect can be achieved by using "EOF" as a heredoc
delimiter instead of "\EOF".
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Suggested-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows N instances of tests run in parallel, each running 1/N parts
of the test suite under Valgrind, to speed things up.
* tr/test-v-and-v-subtest-only:
perf-lib: fix start/stop of perf tests
test-lib: support running tests under valgrind in parallel
test-lib: allow prefixing a custom string before "ok N" etc.
test-lib: valgrind for only tests matching a pattern
test-lib: verbose mode for only tests matching a pattern
test-lib: self-test that --verbose works
test-lib: rearrange start/end of test_expect_* and test_skip
test-lib: refactor $GIT_SKIP_TESTS matching
test-lib: enable MALLOC_* for the actual tests
Do not use FIFOs on cygwin, they do not work. Cygwin includes
coreutils, so has mkfifo, and that command does something. However,
the resultant named pipe is known (on the Cygwin mailing list at
least) to not work correctly.
This disables PIPE for Cygwin, allowing t0008.sh to complete (all other
tests in that file work correctly).
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both "iso8859-1" and "iso-8859-1" are understood as latin-1 by
modern platforms, but the latter is not understood by older
platforms;update tests to use the former.
This is in line with 3994e8a9 (t4201: use ISO8859-1 rather than
ISO-8859-1, 2009-12-03), which did the same.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are often parent pages logically above the gitweb projects
list, e.g. home pages of the organization and department that host
the gitweb server. This change allows you to include links to those
pages in gitweb's breadcrumb trail.
Signed-off-by: Tony Finch <dot@dotat.at>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script was added in 36e5e70 (Start deprecating "git-command" in
favor of "git command", 2007-06-30) with the intent of aiding the
transition away from dashed forms.
It has already been used to help the transision and served its
purpose, and is no longer very useful for follow-up work, because
the majority of remaining matches it finds are false positives.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
