The command-line prompt in the "EXAMPLES" section is "$", however,
examples in the 'git worktree list' section (oddly) use "S" as a
prompt. Fix this inconsistency by settling on "$" as prompt in all
examples.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cc73385cf6 (worktree remove: new command, 2018-02-12) implemented
and documented 'git worktree remove', it forgot to update existing
instructions suggesting manual deletion. Fix this oversight by
recommending 'git worktree remove' instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This could be a localization issue, but we had about four dozen
"normalize"s (or variants, e.g. normalized, renormalize, etc.), and only
one "normalised" (no other variants), so normalize normalised into
normalized.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a '--sort' option for ls-remote, based on the one from
for-each-ref. This e.g. allows ref names to be sorted by version
semantics, so that v1.2 is sorted before v1.10.
Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for use to manually call ‘git credential’ especially
as the interface isn’t super user-friendly and a bit confusing. ‘git
send-email’ will do that for them at the first execution and if the
password matches, it will be saved in the store.
Simplify the documentaion so it dosn’t include the ‘git credential’
invocation (which was incorrect anyway as it should use ‘approve’
instead of ‘fill’) and instead just mentions that credentials helper
must be set up.
Signed-off-by: Michał Nazarewicz <mina86@mina86.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The email address in --authors-file and --authors-prog can be empty but
git-svn translated it into a fictional email address in the form
jondoe <jondoe@6aafaa21e0fb4338a68ab372a049893d>
containing the SVN repository UUID. Now git-svn behaves like git-commit:
If the email is *explicitly* set to the empty string using '<>', the
commit does not contain an email address, only the name:
jondoe <>
Allowing to remove the email address *intentionally* prevents automatic
systems from sending emails to those fictional addresses and avoids
cluttering the log output with unnecessary stuff.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
In 36db1eddf9 ("git-svn: add --authors-prog option", 2009-05-14) the path
to authors-prog was made absolute because git-svn changes the current
directory in some situations. This makes sense if the program is part of
the repository but prevents searching via $PATH.
The old behaviour is still retained, but if the file does not exists, then
authors-prog is searched for in $PATH as any other command.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
Teach git-commit-graph to write graph files. Create new test script to verify
this command succeeds without failure.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git the 'commit-graph' builtin that will be used for writing and
reading packed graph files. The current implementation is mostly
empty, except for an '--object-dir' option.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Documentation/technical/commit-graph.txt with details of the planned
commit graph feature, including future plans.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add document specifying the binary format for commit graphs. This
format allows for:
* New versions.
* New hash functions and hash lengths.
* Optional extensions.
Basic header information is followed by a binary table of contents
into "chunks" that include:
* An ordered list of commit object IDs.
* A 256-entry fanout into that list of OIDs.
* A list of metadata for the commits.
* A list of "large edges" to enable octopus merges.
The format automatically includes two parent positions for every
commit. This favors speed over space, since using only one position
per commit would cause an extra level of indirection for every merge
commit. (Octopus merges suffer from this indirection, but they are
very rare.)
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When upload-pack gained partial clone support (v2.17.0-rc0~132^2~12,
2017-12-08), it was guarded by the uploadpack.allowFilter config item
to allow server operators to control when they start supporting it.
That config item didn't go far enough, though: it controls whether the
'filter' capability is advertised, but if a (custom) client ignores
the capability advertisement and passes a filter specification anyway,
the server would handle that despite allowFilter being false.
This is particularly significant if a security bug is discovered in
this new experimental partial clone code. Installations without
uploadpack.allowFilter ought not to be affected since they don't
intend to support partial clone, but they would be swept up into being
vulnerable.
Simplify and limit the attack surface by making uploadpack.allowFilter
disable the feature, not just the advertisement of it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a tlsv1.3 option to http.sslVersion in addition to the existing
tlsv1.[012] options. libcurl has supported this since 7.52.0.
This requires OpenSSL 1.1.1 with TLS 1.3 enabled or curl built with
recent versions of NSS or BoringSSL as the TLS backend.
Signed-off-by: Loganaden Velvindron <logan@hackers.mu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow --signoff to be used with --interactive and --merge. In
interactive mode only commits marked to be picked, edited or reworded
will be signed off.
The main motivation for this patch was to allow one to run 'git rebase
--exec "make check" --signoff' which is useful when preparing a patch
series for publication and is more convenient than doing the signoff
with another --exec command.
This change also allows --root without --onto to work with --signoff
as well (--root with --onto was already supported).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At some point we may want to rename the function so that it describes what
it actually does as 'submodule_free' doesn't quite describe that this
clears a repository's submodule cache. But that's beyond the scope of
this series.
While at it remove the extern key word from its declaration.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1ada5020b3 ("stash: use stash_push for no verb form", 2017-02-28),
when the pathspec argument was introduced in 'git stash', that was also
documented. However I forgot to remove an extra square bracket after
the '--message' argument, even though the square bracket should have
been after the pathspec argument (where it was also added).
Remove the extra square bracket after the '--message' argument, to show
that the pathspec argument should be used with the 'push' verb.
While the pathspec argument can be used without the push verb, that's a
special case described later in the man page, and removing the first extra
square bracket instead of the second one makes the synopis easier to
understand.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attempt to clarify what the SHAttered attack means in practice for
Git. The previous version of the text made no mention whatsoever of
Git already having a mitigation for this specific attack, which the
SHAttered researchers claim will detect cryptanalytic collision
attacks.
I may have gotten some of the nuances wrong, but as far as I know this
new text accurately summarizes the current situation with SHA-1 in
git. I.e. git doesn't really use SHA-1 anymore, it uses
Hardened-SHA-1 (they just so happen to produce the same outputs
99.99999999999...% of the time).
Thus the previous text was incorrect in asserting that:
[...]As a result [of SHAttered], SHA-1 cannot be considered
cryptographically secure any more[...]
That's not the case. We have a mitigation against SHAttered, *however*
we consider it prudent to move to work towards a NewHash should future
vulnerabilities in either SHA-1 or Hardened-SHA-1 emerge.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the "Repository format extension" to accurately describe what
happens with different versions of Git when they encounter NewHash
repositories, instead of only saying what happens with versions v2.7.0
and later.
See ab9cb76f66 ("Repository format version check.", 2005-11-25) and
00a09d57eb ("introduce "extensions" form of
core.repositoryformatversion", 2015-06-23) for the relevant changes to
the setup code where these variables are checked.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a recent topic.
* tg/worktree-create-tracking:
git-worktree.txt: fix indentation of example and text of 'add' command
git-worktree.txt: fix missing ")" typo
Doc updates.
* ks/submodule-doc-updates:
Doc/git-submodule: improve readability and grammar of a sentence
Doc/gitsubmodules: make some changes to improve readability and syntax
The http tracing code, often used to debug connection issues,
learned to redact potentially sensitive information from its output
so that it can be more safely sharable.
* jt/http-redact-cookies:
http: support omitting data from traces
http: support cookie redaction when tracing
The transfer.fsckobjects configuration tells "git fetch" to
validate the data and connected-ness of objects in the received
pack; the code to perform this check has been taught about the
narrow clone's convention that missing objects that are reachable
from objects in a pack that came from a promissor remote is OK.
* jt/transfer-fsck-with-promissor:
fetch-pack: do not check links for partial fetch
index-pack: support checking objects but not links
In a way similar to how "git tag" learned to honor the pager
setting only in the list mode, "git config" learned to ignore the
pager setting when it is used for setting values (i.e. when the
purpose of the operation is not to "show").
* ma/config-page-only-in-list-mode:
config: change default of `pager.config` to "on"
config: respect `pager.config` in list/get-mode only
t7006: add tests for how git config paginates
The gitattributes documentation claims that the pattern
rules are largely the same as for gitignore. However, the
rules for recursion are different.
In an ideal world, we would make them the same (if for
nothing else than consistency and simplicity), but that
would create backwards compatibility issues. For some
discussion, see this thread:
https://public-inbox.org/git/slrnkldd3g.1l4.jan@majutsushi.net/
But let's at least document the differences instead of
actively misleading the user by claiming that they're the
same.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document changes to core and non-core Perl module handling in 2.17.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This "link" was a feature in early iterations of multiple worktree
functionality for some reason it was dropped [1]. Since nobody creates
this "link", there's no need to check it.
This is mostly used to let the user moves a worktree manually [2]. If
you move a worktree within the same file system, this hard link count
lets us know the worktree is still there even if we don't know where it
is.
We support 'worktree move' now and don't need this anymore.
[1] last appearance in v4 message-id:
1393675983-3232-25-git-send-email-pclouds@gmail.com
and the reason in v5 was "revisit later", message-id:
1394246900-31535-1-git-send-email-pclouds@gmail.com
[2] 23af91d102 (prune: strategies for linked checkouts - 2014-11-30)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the transport-helper capability 'stateless-connect'. This
capability indicates that the transport-helper can be requested to run
the 'stateless-connect' command which should attempt to make a
stateless connection with a remote end. Once established, the
connection can be used by the git client to communicate with
the remote end natively in a stateless-rpc manner as supported by
protocol v2. This means that the client must send everything the server
needs in a single request as the client must not assume any
state-storing on the part of the server or transport.
If a stateless connection cannot be established then the remote-helper
will respond in the same manner as the 'connect' command indicating that
the client should fallback to using the dumb remote-helper commands.
A future patch will implement the 'stateless-connect' capability in our
http remote-helper (remote-curl) so that protocol v2 can be used using
the http transport.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable shallow clones and deepen requests using protocol version 2 if
the server 'fetch' command supports the 'shallow' feature.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When communicating with a v2 server, perform a fetch by requesting the
'fetch' command.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce the ls-refs server command. In protocol v2, the ls-refs
command is used to request the ref advertisement from the server. Since
it is a command which can be requested (as opposed to mandatory in v1),
a client can sent a number of parameters in its request to limit the ref
advertisement based on provided ref-prefixes.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce git-serve, the base server for protocol version 2.
Protocol version 2 is intended to be a replacement for Git's current
wire protocol. The intention is that it will be a simpler, less
wasteful protocol which can evolve over time.
Protocol version 2 improves upon version 1 by eliminating the initial
ref advertisement. In its place a server will export a list of
capabilities and commands which it supports in a capability
advertisement. A client can then request that a particular command be
executed by providing a number of capabilities and command specific
parameters. At the completion of a command, a client can request that
another command be executed or can terminate the connection by sending a
flush packet.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using the --state-branch option allows us to perform incremental filtering.
This may lead to having nothing to rewrite in subsequent filtering, so we need
a way to recognize this case.
So, let's exit with 2 instead of 1 when this "error" occurs.
Signed-off-by: Michele Locati <michele@locati.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-pack command currently supports the
--check-self-contained-and-connected argument, for internal use only,
that instructs it to only check for broken links and not broken objects.
For partial clones, we need the inverse, so add a --fsck-objects
argument that checks for broken objects and not broken links, also for
internal use only.
This will be used by fetch-pack in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree" learned move and remove subcommands.
* nd/worktree-move:
t2028: fix minor error and issues in newly-added "worktree move" tests
worktree remove: allow it when $GIT_WORK_TREE is already gone
worktree remove: new command
worktree move: refuse to move worktrees with submodules
worktree move: accept destination as directory
worktree move: new command
worktree.c: add update_worktree_location()
worktree.c: add validate_worktree()
"git diff" and friends learned "--compact-summary" that shows the
information usually given with the "--summary" option on the same
line as the diffstat output of the "--stat" option (which saves
vertical space and keeps info on a single path at the same place).
* nd/diff-stat-with-summary:
diff: add --compact-summary
diff.c: refactor pprint_rename() to use strbuf
The first usage we give is the original one where, e.g., `git log` is
piped through `git shortlog`. The description that follows reads the
other way round, by first focusing on the general behavior, then ending
with the behavior when reading from stdin.
It is also a tiny bit odd that what is probably the most common usage
and the one a reader is probably looking for is not at the top of the
list. Of course, it is only a two-item list, so it is not _that_ hard to
find... The next commit will add the original usage to the usage string
in builtin/shortlog.c, and it feels more natural to do so below the
most common usage. To avoid being inconsistent, reorder these two
usages here first.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" can spend a lot of cycles to compute the relation
between the current branch and its upstream, which can now be
disabled with "--no-ahead-behind" option.
* jh/status-no-ahead-behind:
status: support --no-ahead-behind in long format
status: update short status to respect --no-ahead-behind
status: add --[no-]ahead-behind to status and commit for V2 format.
stat_tracking_info: return +1 when branches not equal
Add a mention of the security mailing list to the "Reporting Bugs"
section. There's a mention of this list at
https://git-scm.com/community but none in git.git itself.
The copy is pasted from the git-scm.com website. Let's use the same
wording in both places.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since Git 1.7.9, "git merge" defaulted to --no-ff (i.e. even when
the side branch being merged is a descendant of the current commit,
create a merge commit instead of fast-forwarding) when merging a
tag object. This was appropriate default for integrators who pull
signed tags from their downstream contributors, but caused an
unnecessary merges when used by downstream contributors who
habitually "catch up" their topic branches with tagged releases
from the upstream. Update "git merge" to default to --no-ff only
when merging a tag object that does *not* sit at its usual place in
refs/tags/ hierarchy, and allow fast-forwarding otherwise, to
mitigate the problem.
* jc/allow-ff-merging-kept-tags:
merge: allow fast-forward when merging a tracked tag
The new "--show-current-patch" option gives an end-user facing way
to get the diff being applied when "git rebase" (and "git am")
stops with a conflict.
* nd/rebase-show-current-patch:
rebase: introduce and use pseudo-ref REBASE_HEAD
rebase: add --show-current-patch
am: add --show-current-patch
Clarify how configured fetch refspecs interact with the "--prune"
option of "git fetch", and also add a handy short-hand for getting
rid of stale tags that are locally held.
* ab/fetch-prune:
fetch: make the --prune-tags work with <url>
fetch: add a --prune-tags option and fetch.pruneTags config
fetch tests: add scaffolding for the new fetch.pruneTags
git-fetch & config doc: link to the new PRUNING section
git remote doc: correct dangerous lies about what prune does
git fetch doc: add a new section to explain the ins & outs of pruning
fetch tests: fetch <url> <spec> as well as fetch [<remote>]
fetch tests: expand case/esac for later change
fetch tests: double quote a variable for interpolation
fetch tests: test --prune and refspec interaction
fetch tests: add a tag to be deleted to the pruning tests
fetch tests: re-arrange arguments for future readability
fetch tests: refactor in preparation for testing tag pruning
remote: add a macro for "refs/tags/*:refs/tags/*"
fetch: stop accessing "remote" variable indirectly
fetch: trivially refactor assignment to ref_nr
fetch: don't redundantly NULL something calloc() gave us
"git tag" learned an explicit "--edit" option that allows the
message given via "-m" and "-F" to be further edited.
* nm/tag-edit:
tag: add --edit option
In some projects contributions from groups are only accepted from a
common group email address. But every individual may want to receive
replies to her own personal address. That's what we have 'Reply-To'
headers for in SMTP. So introduce an optional '--reply-to' command
line option.
This patch re-uses the $reply_to variable. This could break
out-of-tree patches!
Signed-off-by: Christian Ludwig <chrissicool@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-protocol.txt spec fails to mention that a flush packet
comes in the smart server response after sending the "service"
header.
Technically the client code is actually ready to receive an
arbitrary number of headers here, but since we haven't
introduced any other headers in the past decade (and the
client would just throw them away), let's not mention it in
the spec.
This fixes both BNF and the example. While we're fixing the
latter, let's also add the missing flush after the ref list.
Reported-by: Dorian Taylor <dorian.taylor.lists@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds xfuncname and word_regex patterns for golang, a quite
popular programming language. It also includes test cases for the
xfuncname regex (t4018) and updated documentation.
The xfuncname regex finds functions, structs and interfaces. Although
the Go language prohibits the opening brace from being on its own
line, the regex does not makes it mandatory, to be able to match
`func` statements like this:
func foo(bar int,
baz int) {
}
This is covered by the test case t4018/golang-long-func.
The word_regex pattern finds identifiers, integers, floats, complex
numbers and operators, according to the go specification.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hotfix for a recent topic.
* tg/worktree-create-tracking:
git-worktree.txt: fix indentation of example and text of 'add' command
git-worktree.txt: fix missing ")" typo
"git am" has learned the "--quit" option, in addition to the existing
"--abort" option; having the pair mirrors a few other commands like
"rebase" and "cherry-pick".
* nd/am-quit:
am: support --quit
Certain information is currently shown with --summary, but when used
in combination with --stat it's a bit hard to read since info of the
same file is in two places (--stat and --summary).
On top of that, commits that add or remove files double the number of
display lines, which could be a lot if you add or remove a lot of
files.
--compact-summary embeds most of --summary back in --stat in the
little space between the file name part and the graph line, e.g. with
commit 0433d533f1:
Documentation/merge-config.txt | 4 +
builtin/merge.c | 2 +
...-pull-verify-signatures.sh (new +x) | 81 ++++++++++++++
t/t7612-merge-verify-signatures.sh | 45 ++++++++
4 files changed, 132 insertions(+)
It helps both condensing information and saving some text
space. What's new in diffstat is:
- A new 0644 file is shown as (new)
- A new 0755 file is shown as (new +x)
- A new symlink is shown as (new +l)
- A deleted file is shown as (gone)
- A mode change adding executable bit is shown as (mode +x)
- A mode change removing it is shown as (mode -x)
Note that --compact-summary does not contain all the information
--summary provides. Rewrite percentage is not shown but it could be
added later, like R50% or C20%.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove erroneous space between % and < in '% <(<N>)'.
Signed-off-by: Mårten Kongstad <marten.kongstad@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
Doc update to warn against remaining bugs in untracked cache.
* ab/untracked-cache-invalidation-docs:
update-index doc: note the caveat with "could not open..."
update-index doc: note a fixed bug in the untracked cache
In gitsubmodules.txt, a few non-ASCII apostrophes are used to spell
possessive, e.g. "submodule's". These unfortunately are not
rendered at https://git-scm.com/docs/gitsubmodules correctly by the
renderer used there.
Use ASCII apostrophes instead to work around the problem. It also
is good to be consistent, as there are possessives spelled with
ASCII apostrophes.
Signed-off-by: Motoki Seki <marmot.motoki@gmail.com>
Acked-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.config`
at all when we are not listing or getting configuration. This change
will help with listing large configurations, but will not hurt users of
`git config --edit` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.config` when we are listing or "get"ing config.
We have several getters and some are guaranteed to give at most one line
of output. Paging all getters including those could be convenient from a
documentation point-of-view. The downside would be that a misconfigured
or not so modern pager might wait for user interaction before
terminating. Let's instead respect the config for precisely those
getters which may produce more than one line of output.
`--get-urlmatch` may or may not produce multiple lines of output,
depending on the exact usage. Let's not try to recognize the two modes,
but instead make `--get-urlmatch` always respect the config. Analyzing
the detailed usage might be trivial enough here, but could establish a
precedent that we will never be able to enforce throughout the codebase
and that will just open a can of worms.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git config foo.bar bar` and `git config --get foo.bar`
respects `pager.config`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log from "git daemon" can be redirected with a new option; one
relevant use case is to send the log to standard error (instead of
syslog) when running it from inetd.
* lw/daemon-log-destination:
daemon: add --log-destination=(stderr|syslog|none)
Update the documentation for the 'submodule.recurse' config to identify
that the clone command does not respect it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 4e85333197 (worktree: make add <path> <branch> dwim, 2017-11-26)
added an example command in a literal code block, it neglected to
insert a mandatory "+" line before the block. This omission resulted
in both the literal code block and the (existing) paragraph following
the block to be outdented, even though they should be indented under
the 'add' sub-command along with the rest of the text pertaining to
that command. Furthermore, the mandatory "+" line separating the code
block from the following text got rendered as a leading character on
the line ("+ If <commit-ish>...") rather than being treated as a
formatting directive.
Fix these problems by adding the missing "+" line before the example
code block.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the closing ")" to a parenthetical phrase introduced by 4e85333197
(worktree: make add <path> <branch> dwim, 2017-11-26).
While at it, add a missing ":" at the end of the same sentence since
it precedes an example literal command block.
Reported-by: Mike Nordell <tamlin.thefirst@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long time ago at fab47d05 ("merge: force edit and no-ff mode when
merging a tag object", 2011-11-07), "git merge" was made to always
create a merge commit when merging a tag, even when the side branch
being merged is a descendant of the current branch.
This default is good for merges made by upstream maintainers to
integrate work signed by downstream contributors, but will leave
pointless no-ff merges when downstream contributors pull a newer
release tag to make their long-running topic branches catch up with
the upstream. When there is no local work left on the topic, such a
merge should simply fast-forward to the commit pointed at by the
release tag.
Update the default (again) for "git merge" that merges a tag object
to (1) --no-ff (i.e. create a merge commit even when side branch
fast forwards) if the tag being merged is not at its expected place
in refs/tags/ hierarchy and (2) --ff (i.e. allow fast-forward update
when able) otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to have the output ' A' from 'git status --porcelain'
by adding a file using the '--intend-to-add' flag. Make this clear by
adding the pattern in the table of the documentation.
However the mode 'DM' (deleted in the index, modified in the working tree)
is not possible in the non-merge case in which the file only shows
as 'D ' (and adding it back to the worktree would show an additional line
of an '??' untracked file). It is also not possible in the merge case as
then the mode involves a 'U' on one side of the merge.
Remove that pattern.
Reported-by: Ross Light <light@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a small number of misspellings, ".gitmodule", scattered
throughout the code base, correct them ... no apparent functional
changes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among the "in progress" commands, only git-am and git-merge do not
support --quit. Support --quit in git-am too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the reference to setting core.fsmonitor to `true` (or `false`) as those
are not valid settings.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http tracing code, often used to debug connection issues,
learned to redact potentially sensitive information from its output
so that it can be more safely sharable.
* jt/http-redact-cookies:
http: support omitting data from traces
http: support cookie redaction when tracing
Doc updates.
* ks/submodule-doc-updates:
Doc/git-submodule: improve readability and grammar of a sentence
Doc/gitsubmodules: make some changes to improve readability and syntax
The machinery to clone & fetch, which in turn involves packing and
unpacking objects, have been told how to omit certain objects using
the filtering mechanism introduced by the jh/object-filtering
topic, and also mark the resulting pack as a promisor pack to
tolerate missing objects, taking advantage of the mechanism
introduced by the jh/fsck-promisors topic.
* jh/partial-clone:
t5616: test bulk prefetch after partial fetch
fetch: inherit filter-spec from partial clone
t5616: end-to-end tests for partial clone
fetch-pack: restore save_commit_buffer after use
unpack-trees: batch fetching of missing blobs
clone: partial clone
partial-clone: define partial clone settings in config
fetch: support filters
fetch: refactor calculation of remote list
fetch-pack: test support excluding large blobs
fetch-pack: add --no-filter
fetch-pack, index-pack, transport: partial clone
upload-pack: add object filtering for partial clone
In preparation for implementing narrow/partial clone, the machinery
for checking object connectivity used by gc and fsck has been
taught that a missing object is OK when it is referenced by a
packfile specially marked as coming from trusted repository that
promises to make them available on-demand and lazily.
* jh/fsck-promisors:
gc: do not repack promisor packfiles
rev-list: support termination at promisor objects
sha1_file: support lazily fetching missing objects
introduce fetch-object: fetch one promisor object
index-pack: refactor writing of .keep files
fsck: support promisor objects as CLI argument
fsck: support referenced promisor objects
fsck: support refs pointing to promisor objects
fsck: introduce partialclone extension
extension.partialclone: introduce partial clone extension
In the description of git interpret-trailers, we describe "a group…of
lines" that have certain characteristics. Ensure both options
describing this group use a singular verb for parallelism.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pointing the user to $GIT_DIR/rebase-apply may encourage them to mess
around in there, which is not a good thing. With this, the user does
not have to keep the path around somewhere (because after a couple of
commands, the path may be out of scrollback buffer) when they need to
look at the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to delete a worktree. Like 'move' you cannot
remove the main worktree, or one with submodules inside [1].
For deleting $GIT_WORK_TREE, Untracked files or any staged entries are
considered precious and therefore prevent removal by default. Ignored
files are not precious.
When it comes to deleting $GIT_DIR, there's no "clean" check because
there should not be any valuable data in there, except:
- HEAD reflog. There is nothing we can do about this until somebody
steps up and implements the ref graveyard.
- Detached HEAD. Technically it can still be recovered. Although it
may be nice to warn about orphan commits like 'git checkout' does.
[1] We do 'git status' with --ignore-submodules=all for safety
anyway. But this needs a closer look by submodule people before we
can allow deletion. For example, if a submodule is totally clean,
but its repo not absorbed to the main .git dir, then deleting
worktree also deletes the valuable .submodule repo too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Submodules contains .git files with relative paths. After a worktree
move, these files need to be updated or they may point to nowhere.
This is a bandage patch to make sure "worktree move" don't break
people's worktrees by accident. When .git file update code is in
place, this validate_no_submodules() could be removed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows to relocate linked worktrees. Main worktree cannot
(yet) be moved.
There are two options to move the main worktree, but both have
complications, so it's not implemented yet. Anyway the options are:
- convert the main worktree to a linked one and move it away, leave
the git repository where it is. The repo essentially becomes bare
after this move.
- move the repository with the main worktree. The tricky part is make
sure all file descriptors to the repository are closed, or it may
fail on Windows.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note the caveat where 2.17 is stricter about index validation
potentially causing "could not open directory" warnings when git is
upgraded. See the preceding "dir.c: stop ignoring opendir() error in
open_cached_dir()" change.
This caused some mayhem when I upgraded git to a version with this
series at Booking.com, and other users have doubtless enabled the UC
extension and are in for a surprise when they upgrade. Let's give them
a headsup in the docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the bug tested for in my "status: add a failing test showing
a core.untrackedCache bug" and fixed in Duy's "dir.c: fix missing dir
invalidation in untracked code".
Since this is very likely something others will encounter in the
future on older versions, and it's not obvious how to fix it let's
document both that it exists, and how to "fix" it with a one-off
command.
As noted in that commit, even though this bug gets the untracked cache
into a bad state, we have not yet found a case where this is user
visible, and thus it makes sense for these docs to focus on the
symlink case only.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the new --prune-tags option work properly when git-fetch is
invoked with a <url> parameter instead of a <remote name>
parameter.
This change is split off from the introduction of --prune-tags due to
the relative complexity of munging the incoming argv, which is easier
to review as a separate change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --prune-tags option to git-fetch, along with fetch.pruneTags
config option and a -P shorthand (-p is --prune). This allows for
doing any of:
git fetch -p -P
git fetch --prune --prune-tags
git fetch -p -P origin
git fetch --prune --prune-tags origin
Or simply:
git config fetch.prune true &&
git config fetch.pruneTags true &&
git fetch
Instead of the much more verbose:
git fetch --prune origin 'refs/tags/*:refs/tags/*' '+refs/heads/*:refs/remotes/origin/*'
Before this feature it was painful to support the use-case of pulling
from a repo which is having both its branches *and* tags deleted
regularly, and have our local references to reflect upstream.
At work we create deployment tags in the repo for each rollout, and
there's *lots* of those, so they're archived within weeks for
performance reasons.
Without this change it's hard to centrally configure such repos in
/etc/gitconfig (on servers that are only used for working with
them). You need to set fetch.prune=true globally, and then for each
repo:
git -C {} config --replace-all remote.origin.fetch "refs/tags/*:refs/tags/*" "^\+*refs/tags/\*:refs/tags/\*$"
Now I can simply set fetch.pruneTags=true in /etc/gitconfig as well,
and users running "git pull" will automatically get the pruning
semantics I want.
Even though "git remote" has corresponding "prune" and "update
--prune" subcommands I'm intentionally not adding a corresponding
prune-tags or "update --prune --prune-tags" mode to that command.
It's advertised (as noted in my recent "git remote doc: correct
dangerous lies about what prune does") as only modifying remote
tracking references, whereas any --prune-tags option is always going
to modify what from the user's perspective is a local copy of the tag,
since there's no such thing as a remote tracking tag.
Ideally add_prune_tags_to_fetch_refspec() would be something that
would use ALLOC_GROW() to grow the 'fetch` member of the 'remote'
struct. Instead I'm realloc-ing remote->fetch and adding the
tag_refspec to the end.
The reason is that parse_{fetch,push}_refspec which allocate the
refspec (ultimately remote->fetch) struct are called many places that
don't have access to a 'remote' struct. It would be hard to change all
their callsites to be amenable to carry around the bookkeeping
variables required for dynamic allocation.
All the other callers of the API first incrementally construct the
string version of the refspec in remote->fetch_refspec via
add_fetch_refspec(), before finally calling parse_fetch_refspec() via
some variation of remote_get().
It's less of a pain to deal with the one special case that needs to
modify already constructed refspecs than to chase down and change all
the other callsites. The API I'm adding is intentionally not
generalized because if we add more of these we'd probably want to
re-visit how this is done.
See my "Re: [BUG] git remote prune removes local tags, depending on
fetch config" (87po6ahx87.fsf@evledraar.gmail.com;
https://public-inbox.org/git/87po6ahx87.fsf@evledraar.gmail.com/) for
more background info.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the documentation for fetch.prune, fetch.<name>.prune and
--prune to link to the recently added PRUNING section.
I'd have liked to link directly to it with "<<PRUNING>>" from
fetch-options.txt, since it's included in git-fetch.txt (git-pull.txt
also includes it, but doesn't include that option). However making a
reference across files yields this error:
[...]/Documentation/git-fetch.xml:226: element xref: validity
error : IDREF attribute linkend references an unknown ID "PRUNING"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git remote prune <name>" command uses the same machinery as "git
fetch <name> --prune", and shares all the same caveats, but its
documentation has suggested that it'll just "delete stale
remote-tracking branches under <name>".
This isn't true, and hasn't been true since at least v1.8.5.6 (the
oldest version I could be bothered to test).
E.g. if "refs/tags/*:refs/tags/*" is explicitly set in the refspec of
the remote, it'll delete all local tags <name> doesn't know about.
Instead, briefly give the reader just enough of a hint that this
option might constitute a shotgun aimed at their foot, and point them
to the new PRUNING section in the git-fetch documentation which
explains all the nuances of what this facility does.
See "[BUG] git remote prune removes local tags, depending on fetch
config" (CACi5S_39wNrbfjLfn0xhCY+uewtFN2YmnAcRc86z6pjUTjWPHQ@mail.gmail.com)
by Michael Giuffrida for the initial report.
Reported-by: Michael Giuffrida <michaelpg@chromium.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new section to canonically explain how remote reference pruning
works, and how users should be careful about using it in conjunction
with tag refspecs in particular.
A subsequent commit will update the git-remote documentation to refer
to this section, and details the motivation for writing this in the
first place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It perhaps goes without saying that file-local stuff should
be marked static, but it does not hurt to remind people.
Less obvious is that we are settling on "do not include
extern in function declarations". It is already the default
unless the function was previously declared static (but if
you are following a static declaration with an unmarked one,
you should think about why you are declaring the thing
twice). And so it just becomes an extra noise-word in our
header files.
We used to give the opposite advice, so there are quite a
few "extern" markers in early Git code. But this at least
makes a concrete suggestion that we can follow going
forward.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --edit option whichs allows modifying the messages provided by -m or -F,
the same way git commit --edit does.
Signed-off-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows commits with empty commit messages to be rebased,
matching the same option in git-commit and git-cherry-pick. While empty
log messages are frowned upon, sometimes one finds them in older
repositories (e.g. translated from another VCS [0]), or have other
reasons for desiring them. The option is available in git-commit and
git-cherry-pick, so it is natural to make other git tools play nicely
with them. Adding this as an option allows the default to be "give the
user a chance to fix", while not interrupting the user's workflow
otherwise [1].
[0]: https://stackoverflow.com/q/8542304
[1]: https://public-inbox.org/git/7vd33afqjh.fsf@alter.siamese.dyndns.org/
To implement this, add a new --allow-empty-message flag. Then propagate
it to all calls of 'git commit', 'git cherry-pick', and 'git rebase--helper'
within the rebase scripts.
Signed-off-by: Genki Sky <sky@genki.is>
Reviewed-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option can be used to override the implicit --syslog of
--inetd, or to disable all logging. (While --detach also implies
--syslog, --log-destination=stderr with --detach is useless since
--detach disassociates the process from the original stderr.) --syslog
is retained as an alias for --log-destination=syslog.
--log-destination always overrides implicit --syslog regardless of
option order. This is different than the “last one wins” logic that
applies to some implicit options elsewhere in Git, but should hopefully
be less confusing. (I also don’t know if *all* implicit options in Git
follow “last one wins”.)
The combination of --inetd with --log-destination=stderr is useful, for
instance, when running `git daemon` as an instanced systemd service
(with associated socket unit). In this case, log messages sent via
syslog are received by the journal daemon, but run the risk of being
processed at a time when the `git daemon` process has already exited
(especially if the process was very short-lived, e.g. due to client
error), so that the journal daemon can no longer read its cgroup and
attach the message to the correct systemd unit (see systemd/systemd#2913
[1]). Logging to stderr instead can solve this problem, because systemd
can connect stderr directly to the journal daemon, which then already
knows which unit is associated with this stream.
[1]: https://github.com/systemd/systemd/issues/2913
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Lucas Werkmeister <mail@lucaswerkmeister.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`fnmatch(3)` is a great mention if the intended audience is
programmers. For normal users it's probably better to spell out what
a shell glob is.
This paragraph is updated to roughly tell (or remind) what the main
wildcards are supposed to do. All the details are still hidden away
behind the `fnmatch(3)` wall because bringing the whole specification
here may be too much.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git show' is called without any object it defaults to HEAD. This
has been true since d4ed9793fd ("Simplify common default options setup
for built-in log family.", 2006-04-16).
The SYNOPSIS suggests that the object argument is required. Clarify
that it is not required and note the default.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the declaration and definition of pretend_sha1_file to use
struct object_id and adjust all usages of this function. Rename it to
pretend_object_file.
Signed-off-by: Patryk Obara <patryk.obara@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Separating out the implementation of the handshake when starting a
long-running subprocess (for example, as is done for a clean/smudge
filter) was done in commit fa64a2fdbe ("sub-process: refactor
handshake to common function", 2017-07-26), but its documentation still
resides in gitattributes. Split out the documentation as well.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git status" and "git commit" to accept "--no-ahead-behind"
and "--ahead-behind" arguments to request quick or full ahead/behind
reporting.
When "--no-ahead-behind" is given, the existing porcelain V2 line
"branch.ab +x -y" is replaced with a new "branch.ab +? -?" line.
This indicates that the branch and its upstream are or are not equal
without the expense of computing the full ahead/behind values.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --fixup" did not allow "-m<message>" option to be used
at the same time; allow it to annotate resulting commit with more
text.
* ab/commit-m-with-fixup:
commit: add support for --fixup <commit> -m"<extra message>"
commit doc: document that -c, -C, -F and --fixup with -m error
"diff" family of commands learned "--find-object=<object-id>" option
to limit the findings to changes that involve the named object.
* sb/diff-blobfind-pickaxe:
diff: use HAS_MULTI_BITS instead of counting bits manually
diff: properly error out when combining multiple pickaxe options
diffcore: add a pickaxe option to find a specific blob
diff: introduce DIFF_PICKAXE_KINDS_MASK
diff: migrate diff_flags.pickaxe_ignore_case to a pickaxe_opts bit
diff.h: make pickaxe_opts an unsigned bit field
"git status" after moving a path in the working tree (hence making
it appear "removed") and then adding with the -N option (hence
making that appear "added") detected it as a rename, but did not
report the old and new pathnames correctly.
* nd/ita-wt-renames-in-status:
wt-status.c: handle worktree renames
wt-status.c: rename rename-related fields in wt_status_change_data
wt-status.c: catch unhandled diff status codes
wt-status.c: coding style fix
Use DIFF_DETECT_RENAME for detect_rename assignments
t2203: test status output with porcelain v2 format
GIT_TRACE_CURL provides a way to debug what is being sent and received
over HTTP, with automatic redaction of sensitive information. But it
also logs data transmissions, which significantly increases the log file
size, sometimes unnecessarily. Add an option "GIT_TRACE_CURL_NO_DATA" to
allow the user to omit such data transmissions.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using GIT_TRACE_CURL, Git already redacts the "Authorization:" and
"Proxy-Authorization:" HTTP headers. Extend this redaction to a
user-specified list of cookies, specified through the
"GIT_REDACT_COOKIES" environment variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, correctly quote important words.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Only mention porcelain commands in examples
* Split a sentence for better readability
* Add missing apostrophes
* Clearly specify the advantages of using submodules
* Avoid abbreviations
* Use "Git" consistently
* Improve readability of certain lines
* Clarify when a submodule is considered active
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -e option added in 7950571ad7 ("A few more options for
git-cat-file", 2005-12-03) has always errored out with message on
stderr saying that the provided object is malformed, like this:
$ git cat-file -e malformed; echo $?
fatal: Not a valid object name malformed
128
A reader of this documentation may be misled into thinking that
if ! git cat-file -e "$object" [...]
as opposed to:
if ! git cat-file -e "$object" 2>/dev/null [...]
is sufficient to implement a truly silent test that checks whether
some arbitrary $object string was both valid, and pointed to an
object that exists.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier versions of `git read-tree` required the `--prefix` option value
to end with a slash. This restriction was eventually lifted without a
corresponding amendment to the documentation.
Signed-off-by: Andreas G. Schacker <andreas.schacker@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
One might be tempted to extend git-describe to also work with blobs,
such that `git describe <blob-id>` gives a description as
'<commit-ish>:<path>'. This was implemented at [2]; as seen by the sheer
number of responses (>110), it turns out this is tricky to get right.
The hard part to get right is picking the correct 'commit-ish' as that
could be the commit that (re-)introduced the blob or the blob that
removed the blob; the blob could exist in different branches.
Junio hinted at a different approach of solving this problem, which this
patch implements. Teach the diff machinery another flag for restricting
the information to what is shown. For example:
$ ./git log --oneline --find-object=v2.0.0:Makefile
b2feb64309 Revert the whole "ask curl-config" topic for now
47fbfded53 i18n: only extract comments marked with "TRANSLATORS:"
we observe that the Makefile as shipped with 2.0 was appeared in
v1.9.2-471-g47fbfded53 and in v2.0.0-rc1-5-gb2feb6430b. The
reason why these commits both occur prior to v2.0.0 are evil
merges that are not found using this new mechanism.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
[2] https://public-inbox.org/git/20171028004419.10139-1-sbeller@google.com/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same document for "--diff-filter" is included by many
programs in the diff family. Because it mentions all
possible types (added, removed, etc), this may imply to the
reader that all types can be generated by a particular
command. But this isn't necessarily the case; "diff-files"
cannot generally produce an "Added" entry, since the diff is
limited to what is already in the index.
Let's make it clear that the list here is the full one, and
does not imply anything about what a particular invocation
may produce.
Note that conditionally including items (e.g., omitting
"Added" in the git-diff-files manpage) isn't the right
solution here for two reasons:
- The problem isn't diff-files, but doing an index to
working tree diff. "git diff" can do the same diff, but
also has other modes where "Added" does show up.
- The direction of the diff matters. Doing "diff-files -R"
can get you Added entries (but not Deleted ones).
So it's best just to explain that the set of available types
depends on the specific diff invocation.
Reported-by: John Cheng <johnlicheng@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
049e64aa50 ("Documentation: convert SubmittingPatches to AsciiDoc",
2017-11-12) changed the `git blame` and `git shortlog` examples given in
the section on sending your patches.
In order to italicize the `$path` argument the commands are enclosed in
plus characters as opposed to backticks. The difference between the
quoting methods is that backtick enclosed text is not subject to further
expansion. This formatting makes reading SubmittingPatches in a git
clone a little more difficult. In addition to the underscores around
`$path` the `--` chars in `git shortlog --no-merges` must be replaced
with `{litdd}`.
Use backticks to quote these commands. The italicized `$path` is lost
from the html version but the commands can be read (and copied) more
easily by users reading the text version. These readers are more likely
to use the commands while submitting patches. Make it easier for them.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
"git merge" learned to pay attention to merge.verifySignatures
configuration variable and pretend as if '--verify-signatures'
option was given from the command line.
* hi/merge-verify-sig-config:
t5573, t7612: clean up after unexpected success of 'pull' and 'merge'
t: add tests for pull --verify-signatures
merge: add config option for verifySignatures
Before 425a28e0a4 (diff-lib: allow ita entries treated as "not yet exist
in index" - 2016-10-24) there are never "new files" in the index, which
essentially disables rename detection because we only detect renames
when a new file appears in a diff pair.
After that commit, an i-t-a entry can appear as a new file in "git
diff-files". But the diff callback function in wt-status.c does not
handle this case and produces incorrect status output.
PS. The reader may notice that this patch adds a new xstrdup() but not
a free(). Yes we leak memory (the same for head_path). But wt_status
so far has been short lived, this leak should not matter in
practice.
Noticed-by: Alex Vandiver <alexmv@dropbox.com>
Helped-by: Igor Djordjevic <igor.d.djordjevic@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure now allows not just the repositories but also
the refs to be used to take pre-formatted manpages and html
documents to install.
* rb/quick-install-doc:
install-doc-quick: allow specifying what ref to install
A few structures and variables that are implementation details of
the decorate API have been renamed and then the API got documented
better.
* jt/decorate-api:
decorate: clean up and document API
"git worktree add" learned to run the post-checkout hook, just like
"git checkout" does, after the initial checkout.
* es/worktree-checkout-hook:
worktree: invoke post-checkout hook (unless --no-checkout)
With a configuration variable rebase.abbreviateCommands set,
"git rebase -i" produces the todo list with a single-letter
command names.
* lb/rebase-i-short-command-names:
sequencer.c: drop 'const' from function return type
t3404: add test case for abbreviated commands
rebase -i: learn to abbreviate command names
rebase -i -x: add exec commands via the rebase--helper
rebase -i: update functions to use a flags parameter
rebase -i: replace reference to sha1 with oid
rebase -i: refactor transform_todo_ids
rebase -i: set commit to null in exec commands
Documentation: use preferred name for the 'todo list' script
Documentation: move rebase.* configs to new file
In preparation for implementing narrow/partial clone, the object
walking machinery has been taught a way to tell it to "filter" some
objects from enumeration.
* jh/object-filtering:
rev-list: support --no-filter argument
list-objects-filter-options: support --no-filter
list-objects-filter-options: fix 'keword' typo in comment
pack-objects: add list-objects filtering
rev-list: add list-objects filtering support
list-objects: filter objects in traverse_commit_list
oidset: add iterator methods to oidset
oidmap: add oidmap iterator methods
dir: allow exclusions from blob in addition to file
--update-shelve can now be specified multiple times on the
command-line, to update multiple shelved changelists in a single
submit.
This then means that a git patch series can be mirrored to a
sequence of shelved changelists, and (relatively easily) kept in
sync as changes are made in git.
Note that Perforce does not really support overlapping shelved
changelists where one change touches the files modified by
another. Trying to do this will result in merge conflicts.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for supplying the -m option with --fixup. Doing so has
errored out ever since --fixup was introduced. Before this, the only
way to amend the fixup message while committing was to use --edit and
amend it in the editor.
The use-case for this feature is one of:
* Leaving a quick note to self when creating a --fixup commit when
it's not self-evident why the commit should be squashed without a
note into another one.
* (Ab)using the --fixup feature to "fix up" commits that have already
been pushed to a branch that doesn't allow non-fast-forwards,
i.e. just noting "this should have been part of that other commit",
and if the history ever got rewritten in the future the two should
be combined.
In such a case you might want to leave a small message,
e.g. "forgot this part, which broke XYZ".
With this, --fixup <commit> -m"More" -m"Details" will result in a
commit message like:
!fixup <subject of <commit>>
More
Details
The reason the test being added here seems to squash "More" at the end
of the subject line of the commit being fixed up is because the test
code is using "%s%b" so the body immediately follows the subject, it's
not a bug in this code, and other tests t7500-commit.sh do the same
thing.
When the --fixup option was initially added the "Option -m cannot be
combined" error was expanded from -c, -C and -F to also include
--fixup[1]
Those options could also support combining with -m, but given what
they do I can't think of a good use-case for doing that, so I have not
made the more invasive change of splitting up the logic in commit.c to
first act on those, and then on -m options.
1. d71b8ba7c9 ("commit: --fixup option for use with rebase
--autosquash", 2010-11-02)
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unrecognized escape sequences are invalid in values:
$ git config -f - --list <<EOF
[foo]
bar = "\t\\\y\"\u"
EOF
fatal: bad config line 2 in standard input
But in subsection names, the backslash is simply dropped if the
following character does not produce a recognized escape sequence:
$ git config -f - --list <<EOF
[foo "\t\\\y\"\u"]
bar = baz
EOF
foo.t\y"u.bar=baz
Although it would be nice for subsection names and values to have
consistent behavior, changing the behavior for subsection names is a
nonstarter since it would cause existing, valid config files to
suddenly be interpreted differently.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that providing any of -c, -C, -F and --fixup along with -m
will result in an error. Some variant of this has been errored about
explicitly since 0c091296c0 ("git-commit: log parameter updates.",
2005-08-08), but the documentation was never updated to reflect this.
Wording-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git shows a message to tell the user that it is waiting for the
user to finish editing when spawning an editor, in case the editor
opens to a hidden window or somewhere obscure and the user gets
lost.
* ls/editor-waiting-message:
launch_editor(): indicate that Git waits for user input
refactor "dumb" terminal determination
Ancient part of codebase still shows dots after an abbreviated
object name just to show that it is not a full object name, but
these ellipses are confusing to people who newly discovered Git
who are used to seeing abbreviated object names and find them
confusing with the range syntax.
* ar/unconfuse-three-dots:
t2020: test variations that matter
t4013: test new output from diff --abbrev --raw
diff: diff_aligned_abbrev: remove ellipsis after abbreviated SHA-1 value
t4013: prepare for upcoming "diff --raw --abbrev" output format change
checkout: describe_detached_head: remove ellipsis after committish
print_sha1_ellipsis: introduce helper
Documentation: user-manual: limit usage of ellipsis
Documentation: revisions: fix typo: "three dot" ---> "three-dot" (in line with "two-dot").
The way "git worktree add" determines what branch to create from
where and checkout in the new worktree has been updated a bit.
* tg/worktree-create-tracking:
add worktree.guessRemote config option
worktree: add --guess-remote flag to add subcommand
worktree: make add <path> <branch> dwim
worktree: add --[no-]track option to the add subcommand
worktree: add can be created from any commit-ish
checkout: factor out functions to new lib file
"git diff" learned a variant of the "--patience" algorithm, to
which the user can specify which 'unique' line to be used as
anchoring points.
* jt/diff-anchored-patience:
diff: support anchoring line(s)
Sometimes users are given a hash of an object and they want to
identify it further (ex.: Use verify-pack to find the largest blobs,
but what are these? or [1])
When describing commits, we try to anchor them to tags or refs, as these
are conceptually on a higher level than the commit. And if there is no ref
or tag that matches exactly, we're out of luck. So we employ a heuristic
to make up a name for the commit. These names are ambiguous, there might
be different tags or refs to anchor to, and there might be different
path in the DAG to travel to arrive at the commit precisely.
When describing a blob, we want to describe the blob from a higher layer
as well, which is a tuple of (commit, deep/path) as the tree objects
involved are rather uninteresting. The same blob can be referenced by
multiple commits, so how we decide which commit to use? This patch
implements a rather naive approach on this: As there are no back pointers
from blobs to commits in which the blob occurs, we'll start walking from
any tips available, listing the blobs in-order of the commit and once we
found the blob, we'll take the first commit that listed the blob. For
example
git describe --tags v0.99:Makefile
conversion-901-g7672db20c2:Makefile
tells us the Makefile as it was in v0.99 was introduced in commit 7672db20.
The walking is performed in reverse order to show the introduction of a
blob rather than its last occurrence.
[1] https://stackoverflow.com/questions/223678/which-commit-has-this-blob
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the N-th previous thing checked out syntax (@{-N}) is used
with '--branch' option of check-ref-format the result may not be
the name of a branch that currently exists or ever existed. This
is because @{-N} is used to refer to the N-th last checked out
"thing", which might be a commit object name if the previous check
out was a detached HEAD state; or a branch name, otherwise. The
documentation thus does a wrong thing by promoting it as the
"previous branch syntax".
State that @{-N} is the syntax for specifying "N-th last thing
checked out" and also state that the result of using @{-N} might
also result in an commit object name.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove any doubt that certificates might not be verified by
default.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
@{-N} in "git checkout @{-N}" may refer to a detached HEAD state,
but the documentation was not clear about it, which has been fixed.
* ks/doc-checkout-previous:
Doc/checkout: checking out using @{-N} can lead to detached state
"git send-email" tries to see if the sendmail program is available
in /usr/lib and /usr/sbin; extend the list of locations to be
checked to also include directories on $PATH.
* fk/sendmail-from-path:
git-send-email: honor $PATH for sendmail binary
The tagnames "git log --decorate" uses to annotate the commits can
now be limited to subset of available refs with the two additional
options, --decorate-refs[-exclude]=<pattern>.
* ra/decorate-limit-refs:
log: add option to choose which refs to decorate
We allow the builders, who want to install the preformatted manpages
and html documents, to specify where in their filesystem these two
repositories are stored. Let them also specify which ref (or even a
revision) to grab the preformatted material from.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git merge --verify-signatures can be used to verify that the tip commit
of the branch being merged in is properly signed, but it's cumbersome to
have to specify that every time.
Add a configuration option that enables this behaviour by default, which
can be overridden by --no-verify-signatures.
Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach upload-pack to negotiate object filtering over the protocol and
to send filter parameters to pack-objects. This is intended for partial
clone and fetch.
The idea to make upload-pack configurable using uploadpack.allowFilter
comes from Jonathan Tan's work in [1].
[1] https://public-inbox.org/git/f211093280b422c32cc1b7034130072f35c5ed51.1506714999.git.jonathantanmy@google.com/
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach gc to stop traversal at promisor objects, and to leave promisor
packfiles alone. This has the effect of only repacking non-promisor
packfiles, and preserves the distinction between promisor packfiles and
non-promisor packfiles.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to support termination of an object traversal at any
object from a promisor remote (whether one that the local repo also has,
or one that the local repo knows about because it has another promisor
object that references it).
This will be used subsequently in gc and in the connectivity check used
by fetch.
For efficiency, if an object is referenced by a promisor object, and is
in the local repo only as a non-promisor object, object traversal will
not stop there. This is to avoid building the list of promisor object
references.
(In list-objects.c, the case where obj is NULL in process_blob() and
process_tree() do not need to be changed because those happen only when
there is a conflict between the expected type and the existing object.
If the object doesn't exist, an object will be synthesized, which is
fine.)
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change 'he' to 'them' to be more neutral in "gitworkflows.txt".
Signed-off-by: Matthieu Moy <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Timothee Albertin <timothee.albertin@etu.univ-lyon1.fr>
Signed-off-by: Nathan Payre <nathan.payre@etu.univ-lyon1.fr>
Signed-off-by: Daniel Bensoussan <daniel.bensoussan--bohm@etu.univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the names of the identifiers in decorate.h, document them, and
add an example of how to use these functions.
The example is compiled and run as part of the test suite.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 84ff053d47 (pretty.c: delimit "%(trailers)" arguments
with ",", 2017-10-01) switched the syntax of the trailers
placeholder, but forgot to update the documentation in
pretty-formats.txt.
There's no need to mention the old syntax; it was never in a
released version of Git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a graphical GIT_EDITOR is spawned by a Git command that opens
and waits for user input (e.g. "git rebase -i"), then the editor window
might be obscured by other windows. The user might be left staring at
the original Git terminal window without even realizing that s/he needs
to interact with another window before Git can proceed. To this user Git
appears hanging.
Print a message that Git is waiting for editor input in the original
terminal and get rid of it when the editor returns, if the terminal
supports erasing the last line. Also, make sure that our message is
terminated with a whitespace so that any message the editor may show
upon starting up will be kept separate from our message.
Power users might not want to see this message or their editor might
already print such a message (e.g. emacsclient). Allow these users to
suppress the message by disabling the "advice.waitingForEditor" config.
The standard advise() function is not used here as it would always add
a newline which would make deleting the message harder.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users might want to have the --guess-remote option introduced in
the previous commit on by default, so they don't have to type it out
every time they create a new worktree.
Add a config option worktree.guessRemote that allows users to configure
the default behaviour for themselves.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add <path>' creates a new branch named after the
basename of the <path>, that matches the HEAD of whichever worktree we
were on when calling "git worktree add <path>".
It's sometimes useful to have 'git worktree add <path> behave more like
the dwim machinery in 'git checkout <new-branch>', i.e. check if the new
branch name, derived from the basename of the <path>, uniquely matches
the branch name of a remote-tracking branch, and if so check out that
branch and set the upstream to the remote-tracking branch.
Add a new --guess-remote option that enables exactly that behaviour.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ssh-variant 'simple' introduced earlier broke existing
installations by not passing --port/-4/-6 and not diagnosing an
attempt to pass these as an error. Instead, default to
automatically detect how compatible the GIT_SSH/GIT_SSH_COMMAND is
to OpenSSH convention and then error out an invocation to make it
easier to diagnose connection errors.
* jn/ssh-wrappers:
connect: correct style of C-style comment
ssh: 'simple' variant does not support --port
ssh: 'simple' variant does not support -4/-6
ssh: 'auto' variant to select between 'ssh' and 'simple'
connect: split ssh option computation to its own function
connect: split ssh command line options into separate function
connect: split git:// setup into a separate function
connect: move no_fork fallback to git_tcp_connect
ssh test: make copy_ssh_wrapper_as clean up after itself
A new mechanism to upgrade the wire protocol in place is proposed
and demonstrated that it works with the older versions of Git
without harming them.
* bw/protocol-v1:
Documentation: document Extra Parameters
ssh: introduce a 'simple' ssh variant
i5700: add interop test for protocol transition
http: tell server that the client understands v1
connect: tell server that the client understands v1
connect: teach client to recognize v1 server response
upload-pack, receive-pack: introduce protocol version 1
daemon: recognize hidden request arguments
protocol: introduce protocol extension mechanisms
pkt-line: add packet_write function
connect: in ref advertisement, shallows are last
"git config --expiry-date gc.reflogexpire" can read "2.weeks" from
the configuration and report it as a timestamp, just like "--int"
would read "1k" and report 1024, to help consumption by scripts.
* hm/config-parse-expiry-date:
config: add --expiry-date
"git branch --set-upstream" has been deprecated and (sort of)
removed, as "--set-upstream-to" is the preferred one these days.
The documentation still had "--set-upstream" listed on its
synopsys section, which has been corrected.
* tz/branch-doc-remove-set-upstream:
branch doc: remove --set-upstream from synopsis
"git checkout --recursive" may overwrite and rewind the history of
the branch that happens to be checked out in submodule
repositories, which might not be desirable. Detach the HEAD but
still allow the recursive checkout to succeed in such a case.
* sb/submodule-recursive-checkout-detach-head:
Documentation/checkout: clarify submodule HEADs to be detached
recursive submodules: detach HEAD from new state
Clarify and enhance documentation for "merge-base --fork-point", as
it was clear what it computed but not why/what for.
* jc/merge-base-fork-point-doc:
merge-base --fork-point doc: clarify the example and failure modes
The SubmittingPatches document has been converted to produce an
HTML version via AsciiDoc/Asciidoctor.
* bc/submitting-patches-in-asciidoc:
Documentation: convert SubmittingPatches to AsciiDoc
Documentation: enable compat-mode for Asciidoctor
We do not want an ellipsis displayed following an (abbreviated) SHA-1
value.
The days when this was necessary to indicate the truncation to
lower-level Git commands and/or the user are bygone.
However, to ease the transition, the ellipsis will still be printed if
the user sets the environment variable GIT_PRINT_SHA1_ELLIPSIS to "yes".
Correct documentation with respect to what describe_detached_head prints
when GIT_PRINT_SHA1_ELLIPSIS is not set as indicated above.
Add tests for the old and new behaviour.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There have been a few complaints on the mailing list that git-clone doesn't
respect the `submodule.recurse` setting, which every other command (that
potentially knows how to deal with submodules) respects. In case of clone
this is not beneficial to respect as the user may not want to obtain all
submodules (assuming a pathspec of '.').
Improve the documentation such that the pathspec is mentioned in the
synopsis to alleviate the confusion around the submodule recursion flag
in git-clone.
While at it clarify that the option can be given multiple times for complex
pathspecs.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git rebase -i` already know how to interpret single-letter command
names. Teach it to generate the todo list with these same abbreviated
names.
Based-on-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce fetch-object, providing the ability to fetch one object from a
promisor remote.
This uses fetch-pack. To do this, the transport mechanism has been
updated with 2 flags, "from-promisor" to indicate that the resulting
pack comes from a promisor remote (and thus should be annotated as such
by index-pack), and "no-dependents" to indicate that only the objects
themselves need to be fetched (but fetching additional objects is
nevertheless safe).
Whenever "no-dependents" is used, fetch-pack will refrain from using any
object flags, because it is most likely invoked as part of a dynamic
object fetch by another Git command (which may itself use object flags).
An alternative to this is to leave fetch-pack alone, and instead update
the allocation of flags so that fetch-pack's flags never overlap with
any others, but this will end up shrinking the number of flags available
to nearly every other Git command (that is, every Git command that
accesses objects), so the approach in this commit was used instead.
This will be tested in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce new repository extension option:
`extensions.partialclone`
See the update to Documentation/technical/repository-version.txt
in this patch for more information.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to support --no-filter to override a
previous --filter=<filter_spec> argument. This is
to be consistent with commands that use OPT_PARSE
macros.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach opt_parse_list_objects_filter() to take --no-filter
option and to free the contents of struct filter_options.
This command line argument will be automatically inherited
by commands using OPT_PARSE_LIST_OBJECTS_FILTER(); this
includes pack-objects.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "todo list" instead of "instruction list" or "todo-list" to
reduce further confusion regarding the name of this script.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move all rebase.* configuration variables to a separate file in order to
remove duplicates, and include it in config.txt and git-rebase.txt. The
new descriptions are mostly taken from config.txt as they are more
verbose.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper print_sha1_ellipsis() that pays attention to the
GIT_PRINT_SHA1_ELLIPSIS environment variable, and prepare the tests to
unconditionally set it for the test pieces that will be broken once the code
stops showing the extra dots by default.
The removal of these dots is merely a plan at this step and has not happened
yet but soon will.
Document GIT_PRINT_SHA1_ELLIPSIS.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to use full 40-hex to identify the object names like
the examples hint at by omitting the tail part of an object name as if
that has to be spelled out but the example omits them only for brevity.
Give examples using abbreviated object names without ellipses just like
how people do in real life.
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --list" learned to show its output through the pager by
default when the output is going to a terminal, which is controlled
by the pager.branch configuration variable. This is similar to a
recent change to "git tag --list".
* ma/branch-list-paginate:
branch: change default of `pager.branch` to "on"
branch: respect `pager.branch` in list-mode only
t7006: add tests for how git branch paginates
@{-N} is a syntax for the N-th last "checkout" and not the N-th
last "branch". Therefore, in some cases using `git checkout @{-$N}`
DOES lead to a "detached HEAD" state. This can also be ensured by
the commit message of 75d6e552a (Documentation: @{-N} can refer to
a commit, 2014-01-19) which clearly specifies how @{-N} can be used
to refer not only to a branch but also to a commit.
Correct the misleading sentence which states that @{-N} doesn't
detach HEAD.
Signed-off-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff a new algorithm, one that attempts to prevent user-specified
lines from appearing as a deletion or addition in the end result. The
end user can use this by specifying "--anchored=<text>" one or more
times when using Git commands like "diff" and "show".
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This extends git-send-email to also consider sendmail binaries in $PATH
after checking the (fixed) list of /usr/sbin and /usr/lib, and before
falling back to localhost.
Signed-off-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you come to the documentation thinking "I do not want Git
to take any locks for my background processes", then you may
easily run across "--no-optional-locks" in git.txt.
But it's quite reasonable to hit a specific instance of the
problem: you have "git status" running in the background,
and you notice that it causes lock contention with other
processes. So you look in git-status.txt to see if there is
a way to disable it, but there's no mention of the flag.
Let's add a short note mentioning that status does indeed
touch the index (and why), with a pointer to the global
option. That can point users in the right direction and help
them make a more informed decision about what they're
disabling.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add --renormalize ." is a new and safer way to record the fact
that you are correcting the end-of-line convention and other
"convert_to_git()" glitches in the in-repository data.
* tb/add-renormalize:
add: introduce "--renormalize"
Teach "sendemail.tocmd" to places that know about "sendemail.to",
like documentation and shell completion (in contrib/).
* rv/sendemail-tocmd-in-config-and-completion:
completion: add git config sendemail.tocmd
Documentation/config: add sendemail.tocmd to list preceding "See git-send-email(1)"
Clarify and enhance documentation for "merge-base --fork-point", as
it was clear what it computed but not why/what for.
* jc/merge-base-fork-point-doc:
merge-base --fork-point doc: clarify the example and failure modes
The "diff" family of commands learned to ignore differences in
carriage return at the end of line.
* jc/ignore-cr-at-eol:
diff: --ignore-cr-at-eol
xdiff: reassign xpparm_t.flags bits
Doc update around use of "format-patch --subject-prefix" etc.
* ad/submitting-patches-title-decoration:
doc/SubmittingPatches: correct subject guidance
Currently 'git worktree add <path> <branch>', errors out when 'branch'
is not a local branch. It has no additional dwim'ing features that one
might expect.
Make it behave more like 'git checkout <branch>' when the branch doesn't
exist locally, but a remote tracking branch uniquely matches the desired
branch name, i.e. create a new branch from the remote tracking branch
and set the upstream to the remote tracking branch.
As 'git worktree add' currently just dies in this situation, there are
no backwards compatibility worries when introducing this feature.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add' sets up tracking branches if '<branch>' is
a remote tracking branch, and doesn't set them up otherwise, as is the
default for 'git branch'.
This may or may not be what the user wants. Allow overriding this
behaviour with a --[no-]track flag that gets passed through to 'git
branch'.
We already respect branch.autoSetupMerge, as 'git worktree' just calls
'git branch' internally.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently 'git worktree add' is documented to take an optional <branch>
argument, which is checked out in the new worktree. However it is more
generally possible to use a commit-ish as the optional argument, and
check that out into the new worktree.
Document that this is a possibility, as new users of git worktree add
might find it helpful.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text meant to say that receive-pack runs these hooks, and only
because receive-pack is not a command the end users use every day
(ever), as an explanation also meantioned that it is run in response
to 'git push', which is an end-user facing command readers hopefully
know about.
This unfortunately gave an incorrect impression that 'git push'
always result in the hook to run. If the refs push wanted to update
all already had the desired value, these hooks are not run.
Explicitly mention "... and updates reference(s)" as a precondition
to avoid this confusion.
Helped-by: Christoph Michelbach <michelbach94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach pack-objects to use the filtering provided by the
traverse_commit_list_filtered() interface to omit unwanted
objects from the resulting packfile.
Filtering requires the use of the "--stdout" option.
Add t5317 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach rev-list to use the filtering provided by the
traverse_commit_list_filtered() interface to omit
unwanted objects from the result.
Object filtering is only allowed when one of the "--objects*"
options are used.
When the "--filter-print-omitted" option is used, the omitted
objects are printed at the end. These are marked with a "~".
This option can be combined with "--quiet" to get a list of
just the omitted objects.
Add t6112 test.
In the future, we will introduce a "partial clone" mechanism
wherein an object in a repo, obtained from a remote, may
reference a missing object that can be dynamically fetched from
that remote once needed. This "partial clone" mechanism will
have a way, sometimes slow, of determining if a missing link
is one of the links expected to be produced by this mechanism.
This patch introduces handling of missing objects to help
debugging and development of the "partial clone" mechanism,
and once the mechanism is implemented, for a power user to
perform operations that are missing-object aware without
incurring the cost of checking if a missing link is expected.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although `git stash save` was deprecated recently, some parts of the
documentation still refer to it instead of `push`.
Signed-off-by: Phil Hord <phil.hord@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `log --decorate` is used, git will decorate commits with all
available refs. While in most cases this may give the desired effect,
under some conditions it can lead to excessively verbose output.
Introduce two command line options, `--decorate-refs=<pattern>` and
`--decorate-refs-exclude=<pattern>` to allow the user to select which
refs are used in decoration.
When "--decorate-refs=<pattern>" is given, only the refs that match the
pattern are used in decoration. The refs that match the pattern when
"--decorate-refs-exclude=<pattern>" is given, are never used in
decoration.
These options follow the same convention for mixing negative and
positive patterns across the system, assuming that the inclusive default
is to match all refs available.
(1) if there is no positive pattern given, pretend as if an
inclusive default positive pattern was given;
(2) for each candidate, reject it if it matches no positive
pattern, or if it matches any one of the negative patterns.
The rules for what is considered a match are slightly different from the
rules used elsewhere.
Commands like `log --glob` assume a trailing '/*' when glob chars are
not present in the pattern. This makes it difficult to specify a single
ref. On the other hand, commands like `describe --match --all` allow
specifying exact refs, but do not have the convenience of allowing
"shorthand refs" like 'refs/heads' or 'heads' to refer to
'refs/heads/*'.
The commands introduced in this patch consider a match if:
(a) the pattern contains globs chars,
and regular pattern matching returns a match.
(b) the pattern does not contain glob chars,
and ref '<pattern>' exists, or if ref exists under '<pattern>/'
This allows both behaviours (allowing single refs and shorthand refs)
yet remaining compatible with existent commands.
Helped-by: Kevin Daudt <me@ikke.info>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, 'git notes prune' in man page and usage message
incorrectly lists options as '[-n | -v]', rather than '[-n] [-v]'.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add mention of git prune's "--progress" option to the SYNOPSIS and
DESCRIPTION sections of the man page, and to the usage message of "git
prune" itself.
While we're here, move the explanation of "--" toward the end of the
DESCRIPTION section, where it belongs.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While the "git reflog" man page supports both "--dry-run" and "-n" for
a dry run, the man page mentions only the former, not the latter.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update around use of "format-patch --subject-prefix" etc.
* ad/submitting-patches-title-decoration:
doc/SubmittingPatches: correct subject guidance
Various fixes to bp/fsmonitor topic.
* av/fsmonitor:
fsmonitor: simplify determining the git worktree under Windows
fsmonitor: store fsmonitor bitmap before splitting index
fsmonitor: read from getcwd(), not the PWD environment variable
fsmonitor: delay updating state until after split index is merged
fsmonitor: document GIT_TRACE_FSMONITOR
fsmonitor: don't bother pretty-printing JSON from watchman
fsmonitor: set the PWD to the top of the working tree
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
Android's "repo" tool is a tool for managing a large codebase
consisting of multiple smaller repositories, similar to Git's
submodule feature. Starting with Git 94b8ae5a (ssh: introduce a
'simple' ssh variant, 2017-10-16), users noticed that it stopped
handling the port in ssh:// URLs.
The cause: when it encounters ssh:// URLs, repo pre-connects to the
server and sets GIT_SSH to a helper ".repo/repo/git_ssh" that reuses
that connection. Before 94b8ae5a, the helper was assumed to support
OpenSSH options for lack of a better guess and got passed a -p option
to set the port. After that patch, it uses the new default of a
simple helper that does not accept an option to set the port.
The next release of "repo" will set GIT_SSH_VARIANT to "ssh" to avoid
that. But users of old versions and of other similar GIT_SSH
implementations would not get the benefit of that fix.
So update the default to use OpenSSH options again, with a twist. As
observed in 94b8ae5a, we cannot assume that $GIT_SSH always handles
OpenSSH options: common helpers such as travis-ci's dpl[*] are
configured using GIT_SSH and do not accept OpenSSH options. So make
the default a new variant "auto", with the following behavior:
1. First, check for a recognized basename, like today.
2. If the basename is not recognized, check whether $GIT_SSH supports
OpenSSH options by running
$GIT_SSH -G <options> <host>
This returns status 0 and prints configuration in OpenSSH if it
recognizes all <options> and returns status 255 if it encounters
an unrecognized option. A wrapper script like
exec ssh -- "$@"
would fail with
ssh: Could not resolve hostname -g: Name or service not known
, correctly reflecting that it does not support OpenSSH options.
The command is run with stdin, stdout, and stderr redirected to
/dev/null so even a command that expects a terminal would exit
immediately.
3. Based on the result from step (2), behave like "ssh" (if it
succeeded) or "simple" (if it failed).
This way, the default ssh variant for unrecognized commands can handle
both the repo and dpl cases as intended.
This autodetection has been running on Google workstations since
2017-10-23 with no reported negative effects.
[*] 6c3fddfda1/lib/dpl/provider.rb (L215)
Reported-by: William Yan <wyan@google.com>
Improved-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to ff1e72483 (tag: change default of `pager.tag` to
"on", 2017-08-02) and is safe now that we do not consider `pager.branch`
at all when we are not listing branches. This change will help with
listing many branches, but will not hurt users of `git branch
--edit-description` as it would have before the previous commit.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to de121ffe5 (tag: respect `pager.tag` in list-mode only,
2017-08-02), use the DELAY_PAGER_CONFIG-mechanism to only respect
`pager.branch` when we are listing branches.
We have two possibilities of generalizing what that earlier commit made
to `git tag`. One is to interpret, e.g., --set-upstream-to as "it does
not use an editor, so we should page". Another, the one taken by this
commit, is to say "it does not list, so let's not page". That is in line
with the approach of the series on `pager.tag` and in particular the
wording in Documentation/git-tag.txt, which this commit reuses for
git-branch.txt.
This fixes the failing test added in the previous commit. Also adapt the
test for whether `git branch --set-upstream-to` respects `pager.branch`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --expiry-date as a data-type for config files when
'git config --get' is used. This will return any relative
or fixed dates from config files as timestamps.
This is useful for scripts (e.g. gc.reflogexpire) that work
with timestamps so that '2.weeks' can be converted to a format
acceptable by those scripts/functions.
Following the convention of git_config_pathname(), move
the helper function required for this feature from
builtin/reflog.c to builtin/config.c where other similar
functions exist (e.g. for --bool or --path), and match
the order of parameters with other functions (i.e. output
pointer as first parameter).
Signed-off-by: Haaris Mehmood <hsed@unimetic.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it safer to normalize the line endings in a repository.
Files that had been commited with CRLF will be commited with LF.
The old way to normalize a repo was like this:
# Make sure that there are not untracked files
$ echo "* text=auto" >.gitattributes
$ git read-tree --empty
$ git add .
$ git commit -m "Introduce end-of-line normalization"
The user must make sure that there are no untracked files,
otherwise they would have been added and tracked from now on.
The new "add --renormalize" does not add untracked files:
$ echo "* text=auto" >.gitattributes
$ git add --renormalize .
$ git commit -m "Introduce end-of-line normalization"
Note that "git add --renormalize <pathspec>" is the short form for
"git add -u --renormalize <pathspec>".
While at it, document that the same renormalization may be needed,
whenever a clean filter is added or changed.
Helped-By: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support for the --set-upstream option was removed in 52668846ea
(builtin/branch: stop supporting the "--set-upstream" option,
2017-08-17), after a long deprecation period.
Remove the option from the command synopsis for consistency. Replace
another reference to it in the description of `--delete` with
`--set-upstream-to`.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality to list tree objects in the order they were seen
while traversing the commits will be used in one of the next commits,
where we teach `git describe` to describe not only commits, but blobs, too.
The change in list-objects.c is rather minimal as we'll be re-using
the infrastructure put in place of the revision walking machinery. For
example one could expect that add_pending_tree is not called, but rather
commit->tree is directly passed to the tree traversal function. This
however requires a lot more code than just emptying the queue containing
trees after each commit.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SubmittingPatches document has been converted to produce an
HTML version via AsciiDoc/Asciidoctor.
* bc/submitting-patches-in-asciidoc:
Documentation: convert SubmittingPatches to AsciiDoc
Documentation: enable compat-mode for Asciidoctor
Doc and message updates to teach users "bisect view" is a synonym
for "bisect visualize".
* rd/bisect-view-is-visualize:
bisect: mention "view" as an alternative to "visualize"
The "--format=..." option "git for-each-ref" takes learned to show
the name of the 'remote' repository and the ref at the remote side
that is affected for 'upstream' and 'push' via "%(push:remotename)"
and friends.
* js/for-each-ref-remote-name-and-ref:
for-each-ref: test :remotename and :remoteref
for-each-ref: let upstream/push report the remote ref name
for-each-ref: let upstream/push optionally report the remote name
MinGW updates.
* js/mingw-redirect-std-handles:
mingw: document the standard handle redirection
mingw: optionally redirect stderr/stdout via the same handle
mingw: add experimental feature to redirect standard handles
Description of blame.{showroot,blankboundary,showemail,date}
configuration variables have been added to "git config --help".
* sb/blame-config-doc:
config: document blame configuration
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
The set of paths output from "git status --ignored" was tied
closely with its "--untracked=<mode>" option, but now it can be
controlled more flexibly. Most notably, a directory that is
ignored because it is listed to be ignored in the ignore/exclude
mechanism can be handled differently from a directory that ends up
to be ignored only because all files in it are ignored.
* jm/status-ignored-files-list:
status: test ignored modes
status: document options to show matching ignored files
status: report matching ignored and normal untracked
status: add option to show ignored files differently
The SubmittingPatches document is often cited by outside parties as an
example of good practices to follow, including logical, independent
commits; patch sign-offs; and sending patches to a mailing list.
Currently, people who want to cite a particular section tend to either
refer to it by name and let the interested party search through the
document to find it, or link to a given line number on GitHub and hope
the file doesn't change.
Instead, convert the document to AsciiDoc. Build it as part of the
technical documentation, since it is likely of interest to the same
group of people. Provide stable links to the sections which outside
parties are likely to want to link to. Make some minor structural
changes to organize it so that it can be formatted sanely.
Since the makefile needs a .txt extension in order to build with the
rest of the documentation, simply copy the file. Ignore the temporary
file so it doesn't get checked in accidentally, and remove it as part of
the clean process. Do this instead of renaming the file so that people
who have already linked to the documentation (who we're trying to help)
don't find their links broken. Avoid symlinking since Windows will not
like that.
This allows us to render the document as part of the website for the
benefit of others who wish to link to it as well as providing a more
nicely formatted display for our community and potential contributors.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak a small number of files to mention "view" as an alternative to
"visualize".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The examples and common practice for adding markers such as "RFC" or
"v2" to the subject of patch emails is to have them within the same
brackets as the "PATCH" text, not after the closing bracket. Further,
the practice of `git format-patch` and the like, as well as what appears
to be the more common pratice on the mailing list, is to use "[RFC
PATCH]", not "[PATCH/RFC]".
Update the SubmittingPatches article to match and to reference the
`format-patch` helper arguments, and also make some minor text
clarifications in the area.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW updates.
* js/mingw-redirect-std-handles:
mingw: document the standard handle redirection
mingw: optionally redirect stderr/stdout via the same handle
mingw: add experimental feature to redirect standard handles
Description of blame.{showroot,blankboundary,showemail,date}
configuration variables have been added to "git config --help".
* sb/blame-config-doc:
config: document blame configuration
The illustrated history used to explain the `--fork-point` mode
named three keypoint commits B3, B2 and B1 from the oldest to the
newest, which was hard to read. Relabel them to B0, B1, B2. Also
illustrate the history after the rebase using the `--fork-point`
facility was made.
The text already mentions use of reflog, but the description is not
clear what benefit we are trying to gain by using reflog. Clarify
that it is to find the commits that were known to be at the tip of
the remote-tracking branch. This in turn necessitates users to know
the ramifications of the underlying assumptions, namely, expiry of
reflog entries will make it impossible to determine which commits
were at the tip of the remote-tracking branches and we fail when in
doubt (instead of giving a random and incorrect result without even
warning). Another limitation is that it won't be useful if you did
not fork from the tip of a remote-tracking branch but from in the
middle.
Describe them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are times when scripts want to know not only the name of the
push branch on the remote, but also the name of the branch as known
by the remote repository.
An example of this is when a tool wants to push to the very same branch
from which it would pull automatically, i.e. the `<remote>` and the `<to>`
in `git push <remote> <from>:<to>` would be provided by
`%(upstream:remotename)` and `%(upstream:remoteref)`, respectively.
This patch offers the new suffix :remoteref for the `upstream` and `push`
atoms, allowing to show exactly that. Example:
$ cat .git/config
...
[remote "origin"]
url = https://where.do.we.come/from
fetch = refs/heads/*:refs/remote/origin/*
[branch "master"]
remote = origin
merge = refs/heads/master
[branch "develop/with/topics"]
remote = origin
merge = refs/heads/develop/with/topics
...
$ git for-each-ref \
--format='%(push) %(push:remoteref)' \
refs/heads
refs/remotes/origin/master refs/heads/master
refs/remotes/origin/develop/with/topics refs/heads/develop/with/topics
Signed-off-by: J Wyman <jwyman@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --ignore-cr-at-eol tells the diff machinery to treat a
carriage-return at the end of a (complete) line as if it does not
exist.
Just like other "--ignore-*" options to ignore various kinds of
whitespace differences, this will help reviewing the real changes
you made without getting distracted by spurious CRLF<->LF conversion
made by your editor program.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
[jch: squashed in command line completion by Dscho]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" has been deprecated in favour of "git stash push".
* tg/deprecate-stash-save:
stash: remove now superfluos help for "stash push"
stash: mark "git stash save" deprecated in the man page
stash: replace "git stash save" with "git stash push" in the documentation
The "--push-option=<string>" option to "git push" now defaults to a
list of strings configured via push.pushOption variable.
* mp/push-pushoption-config:
builtin/push.c: add push.pushOption config
"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
"git pull" has been taught to accept "--[no-]signoff" option and
pass it down to "git merge".
* wk/pull-signoff:
pull: pass --signoff/--no-signoff to "git merge"
A hook script that is set unexecutable is simply ignored. Git
notifies when such a file is ignored, unless the message is
squelched via advice.ignoredHook configuration.
* dm/run-command-ignored-hook-advise:
run-command: add hint when a hook is ignored
The most notable change is that we no longer take "git add ''" and
add everything. An empty string is now an error when used as a
pathspec element.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options are currently only referenced by the git-blame man page,
also explain them in git-config, which is the canonical page to
contain all config options.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This heuristic has been the default since 2.14 so we should not confuse our
users by saying that it's experimental and off by default.
Signed-off-by: Carlos Martín Nieto <cmn@dwim.me>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feature has been in Git for Windows since v2.11.0(2), as an
experimental option. Now it is considered mature, and it is high time to
document it properly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoctor 1.5.0 and later have a compatibility mode that makes it more
compatible with some Asciidoc syntax, notably the single and double
quote handling. While this doesn't affect any of our current
documentation, it would be beneficial to enable this mode to reduce the
differences between AsciiDoc and Asciidoctor if we make use of those
features in the future.
Since this mode is specified as an attribute, if a version of
Asciidoctor doesn't understand it, it will simply be ignored.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions of the options '--parents', '--children' and
'--graph' say "see 'History Simplification' below", although the
referred section is in fact above the description of these options.
Send readers in the right direction by saying "above" instead of
"below".
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash push' fixes a historical wart in the interface of 'git stash
save'. As 'git stash push' has all functionality of 'git stash save',
with a nicer, more consistent user interface deprecate 'git stash
save'. To do this, remove it from the synopsis of the man page, and
move it to a separate section, stating that it is deprecated.
Helped-by: Robert P. J. Day <rpjday@crashcourse.ca>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash push" is the newer interface for creating a stash. While we
are still keeping "git stash save" around for the time being, it's better
to point new users of "git stash" to the more modern (and more feature
rich) interface, instead of teaching them the older version that we
might want to phase out in the future.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push options need to be given explicitly, via the command line as "git
push --push-option <option>". Add the config option push.pushOption,
which is a multi-valued option, containing push options that are sent
by default.
When push options are set in the lower-priority configulation file
(e.g. /etc/gitconfig, or $HOME/.gitconfig), they can be unset later in
the more specific repository config by the empty string.
Add tests and update documentation as well.
Signed-off-by: Marius Paliga <marius.paliga@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
Update the documentation for "git filter-branch" so that the filter
options are listed in the same order as they are applied, as
described in an earlier part of the doc.
* dg/filter-branch-filter-order-doc:
doc: list filter-branch subdirectory-filter first
"git fetch <there> <src>:<dst>" allows an object name on the <src>
side when the other side accepts such a request since Git v2.5, but
the documentation was left stale.
* jc/fetch-refspec-doc-update:
fetch doc: src side of refspec could be full SHA-1
Change the word "bla" to "section.variable"; "bla" is a placeholder
for a variable name but it wasn't clear for everyone.
While we're here, also reformat this sample command line to use
monospace instead of italics, to better match the rest of the file.
Use a space instead of a dash in "git config", as is common in the
rest of Git's documentation.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: MOY Matthieu <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Daniel Bensoussan <daniel.bensoussan--bohm@etu.univ-lyon1.fr>
Signed-off-by: Timothee Albertin <timothee.albertin@etu.univ-lyon1.fr>
Signed-off-by: Nathan Payre <nathan.payre@etu.univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Doc update.
* kd/doc-for-each-ref:
doc/for-each-ref: explicitly specify option names
doc/for-each-ref: consistently use '=' to between argument names and values
The documentation for '-X<option>' for merges was misleadingly
written to suggest that "-s theirs" exists, which is not the case.
* jc/merge-x-theirs-docfix:
merge-strategies: avoid implying that "-s theirs" exists
The "--force" option can also be used when the named branch does not
yet exist, and the point of the option is the user can (re)point the
branch to the named commit even if it does. Add 'even' before 'if'
to clarify. Also, insert another comma after "Without -f" before
"the command refuses..." to make the text easier to parse.
Incidentally, this change should help certain versions of
docbook-xsl-stylesheets that render the original without any
whitespace between "-f" and "git".
Noticed-by: Lars Schneider <larsxschneider@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the "theoretically more correct" approach of simply
stepping back to the state before plumbing commands started paying
attention to "color.ui" configuration variable.
Let's run with this one.
* jk/ref-filter-colors-fix:
tag: respect color.ui config
Revert "color: check color.ui in git_default_config()"
Revert "t6006: drop "always" color config tests"
Revert "color: make "always" the same as "auto" in config"
The docs claim that filters are applied in the listed order, so
subdirectory-filter should come first.
For consistency, apply the same order to the SYNOPSIS and the script's usage, as
well as the switch while parsing arguments.
Add missing --prune-empty to the script's usage.
Signed-off-by: David Glasser <glasser@davidglasser.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git check-ref-format --branch $name" feature was originally
introduced (and was advertised) as a way for scripts to take any
end-user supplied string (like "master", "@{-1}" etc.) and see if it
is usable when Git expects to see a branch name, and also obtain the
concrete branch name that the at-mark magic expands to.
Emphasize that "see if it is usable" role in the description and
clarify that the @{...} expansion only occurs when run from within a
repository.
[jn: split out from a larger patch]
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a9d34933 ("Merge branch 'fm/fetch-raw-sha1'", 2015-06-01) we
allow to fetch by an object name when the other side accepts such a
request, but we never updated the documentation to match.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6be4595edb.
That commit weakened the "always" setting of color config so
that it acted as "auto". This was meant to solve regressions
in v2.14.2 in which setting "color.ui=always" in the on-disk
config broke scripts like add--interactive, because the
plumbing diff commands began to generate color output.
This was due to 136c8c8b8f (color: check color.ui in
git_default_config(), 2017-07-13), which was in turn trying
to fix issues caused by 4c7f1819b3 (make color.ui default to
'auto', 2013-06-10). But in weakening "always", we created
even more problems, as people expect to be able to use "git
-c color.ui=always" to force color (especially because some
commands don't have their own --color flag). We can fix that
by special-casing the command-line "-c", but now things are
getting pretty confusing.
Instead of piling hacks upon hacks, let's start peeling off
the hacks. The first step is dropping the weakening of
"always", which this revert does.
Note that we could actually revert the whole series merged
in by da15b78e52. Most of that
series consists of preparations to the tests to handle the
weakening of "-c color.ui=always". But it's worth keeping
for a few reasons:
- there are some other preparatory cleanups, like
e433749d86 (test-terminal: set TERM=vt100, 2017-10-03)
- it adds "--color" options more consistently in
0c88bf5050 (provide --color option for all ref-filter
users, 2017-10-03)
- some of the cases dropping "-c" end up being more robust
and realistic tests, as in 01c94e9001 (t7508: use
test_terminal for color output, 2017-10-03)
- the preferred tool for overriding config is "--color",
and we should be modeling that consistently
We can individually revert the few commits necessary to
restore some useful tests (which will be done on top of this
patch).
Note that this isn't a pure revert; we'll keep the test
added in t3701, but mark it as failure for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
Document the server support for Extra Parameters, additional information
that the client can send in its first message to the server during a
Git client-server interaction.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the 'ssh' transport, the '-o' option is used to specify an
environment variable which should be set on the remote end. This allows
git to send additional information when contacting the server,
requesting the use of a different protocol version via the
'GIT_PROTOCOL' environment variable like so: "-o SendEnv=GIT_PROTOCOL".
Unfortunately not all ssh variants support the sending of environment
variables to the remote end. To account for this, only use the '-o'
option for ssh variants which are OpenSSH compliant. This is done by
checking that the basename of the ssh command is 'ssh' or the ssh
variant is overridden to be 'ssh' (via the ssh.variant config).
Other options like '-p' and '-P', which are used to specify a specific
port to use, or '-4' and '-6', which are used to indicate that IPV4 or
IPV6 addresses should be used, may also not be supported by all ssh
variants.
Currently if an ssh command's basename wasn't 'plink' or
'tortoiseplink' git assumes that the command is an OpenSSH variant.
Since user configured ssh commands may not be OpenSSH compliant, tighten
this constraint and assume a variant of 'simple' if the basename of the
command doesn't match the variants known to git. The new ssh variant
'simple' will only have the host and command to execute ([username@]host
command) passed as parameters to the ssh command.
Update the Documentation to better reflect the command-line options sent
to ssh commands based on their variant.
Reported-by: Jeffrey Yasskin <jyasskin@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create protocol.{c,h} and provide functions which future servers and
clients can use to determine which protocol to use or is being used.
Also introduce the 'GIT_PROTOCOL' environment variable which will be
used to communicate a colon separated list of keys with optional values
to a server. Unknown keys and values must be tolerated. This mechanism
is used to communicate which version of the wire protocol a client would
like to use with a server.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge can take --signoff, but without pull passing --signoff down, it
is inconvenient to use; allow 'pull' to take the option and pass it
through.
The order of options in merge-options.txt is mostly alphabetical by
long option since 7c85d274 (Documentation/merge-options.txt: order
options in alphabetical groups, 2009-10-22). The long-option bit
didn't make it into the commit message, but it's under the fold in
[1]. I've put --signoff between --log and --stat to preserve the
alphabetical order.
[1]: https://public-inbox.org/git/87iqe7zspn.fsf@jondo.cante.net/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pull has supported these since ea230d8 (pull: add the --gpg-sign
option, 2014-02-10). Insert in long-option alphabetical order
following 7c85d274 (Documentation/merge-options.txt: order options
in alphabetical groups, 2009-10-22).
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are "git checkout [-p][<tree-ish>][--][<paths>...]" in the
SYNOPSIS section, and "git checkout [-p][<tree-ish>][--]<paths>..."
as the header for the section that explains the "check out paths
from index/tree-ish" mode. It is unclear if we require at least one
path, or it is entirely optional.
Actually, both are wrong. Without the "-p(atch)" option, you must
have <pathspec> (otherwise, with a commit that is a <tree-ish>, you
would be checking out that commit to build a new history on top of
it). With it, it is already clear that you are checking out paths,
it is optional. In other words, you cannot omit both.
The source of the confusion is that -p(atch) is described as if it
is just another "optional" part and its description is lumped
together with the non patch mode, even though the actual end user
experience is vastly different.
Let's split the entry into two, and describe the regular mode and
the patch mode separately. This allows us to make it clear that the
regular mode MUST be given at least one pathspec, that the patch
mode can be invoked with either '-p' or '--patch' but one of these
must be given, and that the pathspec is entirely optional in the
patch mode.
Also, revamp the explanation of "checkout paths" by removing
extraneous description at the beginning, that says "checking out
paths is not checking out a branch". Explaining what it is for and
when the user wants to use it upfront is the most direct way to help
the readers.
Noticed-by: Robert P J Day
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git for-each-ref --format=..." learned a new format element,
%(trailers), to show only the commit log trailer part of the log
message.
* tb/show-trailers-in-ref-filter:
ref-filter.c: parse trailers arguments with %(contents) atom
ref-filter.c: use trailer_opts to format trailers
t6300: refactor %(trailers) tests
doc: use "`<literal>`"-style quoting for literal strings
doc: 'trailers' is the preferred way to format trailers
t4205: unfold across multiple lines
There are times when e.g. scripts want to know not only the name of the
upstream branch on the remote repository, but also the name of the
remote.
This patch offers the new suffix :remotename for the upstream and for
the push atoms, allowing to show exactly that. Example:
$ cat .git/config
...
[remote "origin"]
url = https://where.do.we.come/from
fetch = refs/heads/*:refs/remote/origin/*
[remote "hello-world"]
url = https://hello.world/git
fetch = refs/heads/*:refs/remote/origin/*
pushURL = hello.world:git
push = refs/heads/*:refs/heads/*
[branch "master"]
remote = origin
pushRemote = hello-world
...
$ git for-each-ref \
--format='%(upstream) %(upstream:remotename) %(push:remotename)' \
refs/heads/master
refs/remotes/origin/master origin hello-world
The implementation chooses *not* to DWIM the push remote if no explicit
push remote was configured; The reason is that it is possible to DWIM this
by using
%(if)%(push:remotename)%(then)
%(push:remotename)
%(else)
%(upstream:remotename)
%(end)
while it would be impossible to "un-DWIM" the information in case the
caller is really only interested in explicit push remotes.
While `:remote` would be shorter, it would also be a bit more ambiguous,
and it would also shut the door e.g. for `:remoteref` (which would
obviously refer to the corresponding ref in the remote repository).
Note: the dashless, non-CamelCased form `:remotename` follows the
example of the `:trackshort` example.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an hook is present but the file is not set as executable then git will
ignore the hook.
For now this is silent which can be confusing.
This commit adds this warning to improve the situation:
hint: The 'pre-commit' hook was ignored because it's not set as executable.
hint: You can disable this warning with `git config advice.ignoredHook false`
To allow the old use-case of enabling/disabling hooks via the executable flag a
new setting is introduced: advice.ignoredHook.
Signed-off-by: Damien Marié <damien@dam.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix regression of "git add -p" for users with "color.ui = always"
in their configuration, by merging the topic below and adjusting it
for the 'master' front.
* jk/ui-color-always-to-auto:
t7301: use test_terminal to check color
t4015: use --color with --color-moved
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
In 4f665f2cf3 (string-list.h: move documentation from Documentation/api/
into header, 2017-09-26) the string-list API documentation was moved to
string-list.h. The argv-array API documentation may follow a similar
course in the future. Until then, prevent the broken link from making
it to the end-user documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/ui-color-always-to-auto-maint:
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
It can be handy to use `--color=always` (or it's synonym
`--color`) on the command-line to convince a command to
produce color even if it's stdout isn't going to the
terminal or a pager.
What's less clear is whether it makes sense to set config
variables like color.ui to `always`. For a one-shot like:
git -c color.ui=always ...
it's potentially useful (especially if the command doesn't
directly support the `--color` option). But setting `always`
in your on-disk config is much muddier, as you may be
surprised when piped commands generate colors (and send them
to whatever is consuming the pipe downstream).
Some people have done this anyway, because:
1. The documentation for color.ui makes it sound like
using `always` is a good idea, when you almost
certainly want `auto`.
2. Traditionally not every command (and especially not
plumbing) respected color.ui in the first place. So
the confusion came up less frequently than it might
have.
The situation changed in 136c8c8b8f (color: check color.ui
in git_default_config(), 2017-07-13), which negated point
(2): now scripts using only plumbing commands (like
add-interactive) are broken by this setting.
That commit was fixing real issues (e.g., by making
`color.ui=never` work, since `auto` is the default), so we
don't want to just revert it. We could turn `always` into a
noop in plumbing commands, but that creates a hard-to-explain
inconsistency between the plumbing and other commands.
Instead, let's just turn `always` into `auto` for all config.
This does break the "one-shot" config shown above, but again,
we're probably better to have simple and consistent rules than
to try to special-case command-line config.
There is one place where `always` should retain its meaning:
on the command line, `--color=always` should continue to be
the same as `--color`, overriding any isatty checks. Since the
command-line parser also depends on git_config_colorbool(), we
can use the existence of the "var" string to deterine whether
we are serving the command-line or the config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some commands (most notably "git status") makes an opportunistic
update when performing a read-only operation to help optimize later
operations in the same repository. The new "--no-optional-locks"
option can be passed to Git to disable them.
* jk/no-optional-locks:
git: add --no-optional-locks option
"git branch" learned "-c/-C" to create a new branch by copying an
existing one.
* sd/branch-copy:
branch: fix "copy" to never touch HEAD
branch: add a --copy (-c) option to go with --move (-m)
branch: add test for -m renaming multiple config sections
config: create a function to format section headers
The final batch to "git rebase -i" updates to move more code from
the shell script to C.
* js/rebase-i-final:
rebase -i: rearrange fixup/squash lines using the rebase--helper
t3415: test fixup with wrapped oneline
rebase -i: skip unnecessary picks using the rebase--helper
rebase -i: check for missing commits in the rebase--helper
t3404: relax rebase.missingCommitsCheck tests
rebase -i: also expand/collapse the SHA-1s via the rebase--helper
rebase -i: do not invent onelines when expanding/collapsing SHA-1s
rebase -i: remove useless indentation
rebase -i: generate the script via rebase--helper
t3415: verify that an empty instructionFormat is handled as before
Fill trailer_opts with "unfold" and "only" to match the sub-arguments
given to the "%(trailers)" atom. Then, let's use the filled trailer_opts
instance with 'format_trailers_from_commit' in order to format trailers
in the desired manner.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"'<string>'"-style quoting is not appropriate when quoting literal
strings in the "Documentation/" subtree.
In preparation for adding additional information to this section of
git-for-each-ref(1)'s documentation, update them to use "`<literal>`"
instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation makes reference to 'contents:trailers' as an example
to dig the trailers out of a commit. 'trailers' is an unmentioned
alternative, which is treated as an alias of 'contents:trailers'.
Since 'trailers' is easier to type, prefer that as the designated way to
dig out trailers information.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes the core.fsmonitor setting, the fsmonitor integration hook,
and the fsmonitor index extension.
Also add documentation for the new fsmonitor options to ls-files and
update-index.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As "git commit" to conclude a conflicted "git merge" honors the
commit-msg hook, "git merge" that records a merge commit that
cleanly auto-merges should, but it didn't.
* sb/merge-commit-msg-hook (2017-09-22) 1 commit
(merged to 'next' on 2017-09-25 at 096e0502a8)
+ Documentation/githooks: mention merge in commit-msg hook
Add documentation for a topic that has recently graduated to the
'master' branch.
* sb/merge-commit-msg-hook:
Documentation/githooks: mention merge in commit-msg hook
"git describe --match <pattern>" has been taught to play well with
the "--all" option.
* mk/describe-match-with-all:
describe: teach --match to handle branches and remotes
Leaving spaces around the `-delimeters for commands means asciidoc fails
to parse them as the start of a literal string. Remove an extraneous
space that is causing a literal to not be formatted as such.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Acked-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This document describes what a transition to a new hash function for
Git would look like. Add it to Documentation/technical/ as the plan
of record so that future changes can be recorded as patches.
Also-by: Brandon Williams <bmwill@google.com>
Also-by: Jonathan Tan <jonathantanmy@google.com>
Also-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for '-X<option>' for merges was misleadingly
written to suggest that "-s theirs" exists, which is not the case.
* jc/merge-x-theirs-docfix:
merge-strategies: avoid implying that "-s theirs" exists
"git filter-branch" cannot reproduce a history with a tag without
the tagger field, which only ancient versions of Git allowed to be
created. This has been corrected.
* ic/fix-filter-branch-to-handle-tag-without-tagger:
filter-branch: use hash-object instead of mktag
filter-branch: stash away ref map in a branch
filter-branch: preserve and restore $GIT_AUTHOR_* and $GIT_COMMITTER_*
filter-branch: reset $GIT_* before cleaning up
Some tools like IDEs or fancy editors may periodically run
commands like "git status" in the background to keep track
of the state of the repository. Some of these commands may
refresh the index and write out the result in an
opportunistic way: if they can get the index lock, then they
update the on-disk index with any updates they find. And if
not, then their in-core refresh is lost and just has to be
recomputed by the next caller.
But taking the index lock may conflict with other operations
in the repository. Especially ones that the user is doing
themselves, which _aren't_ opportunistic. In other words,
"git status" knows how to back off when somebody else is
holding the lock, but other commands don't know that status
would be happy to drop the lock if somebody else wanted it.
There are a couple possible solutions:
1. Have some kind of "pseudo-lock" that allows other
commands to tell status that they want the lock.
This is likely to be complicated and error-prone to
implement (and maybe even impossible with just
dotlocks to work from, as it requires some
inter-process communication).
2. Avoid background runs of commands like "git status"
that want to do opportunistic updates, preferring
instead plumbing like diff-files, etc.
This is awkward for a couple of reasons. One is that
"status --porcelain" reports a lot more about the
repository state than is available from individual
plumbing commands. And two is that we actually _do_
want to see the refreshed index. We just don't want to
take a lock or write out the result. Whereas commands
like diff-files expect us to refresh the index
separately and write it to disk so that they can depend
on the result. But that write is exactly what we're
trying to avoid.
3. Ask "status" not to lock or write the index.
This is easy to implement. The big downside is that any
work done in refreshing the index for such a call is
lost when the process exits. So a background process
may end up re-hashing a changed file multiple times
until the user runs a command that does an index
refresh themselves.
This patch implements the option 3. The idea (and the test)
is largely stolen from a Git for Windows patch by Johannes
Schindelin, 67e5ce7f63 (status: offer *not* to lock the
index and update it, 2016-08-12). The twist here is that
instead of making this an option to "git status", it becomes
a "git" option and matching environment variable.
The reason there is two-fold:
1. An environment variable is carried through to
sub-processes. And whether an invocation is a
background process or not should apply to the whole
process tree. So you could do "git --no-optional-locks
foo", and if "foo" is a script or alias that calls
"status", you'll still get the effect.
2. There may be other programs that want the same
treatment.
I've punted here on finding more callers to convert,
since "status" is the obvious one to call as a repeated
background job. But "git diff"'s opportunistic refresh
of the index may be a good candidate.
The test is taken from 67e5ce7f63, and it's worth repeating
Johannes's explanation:
Note that the regression test added in this commit does
not *really* verify that no index.lock file was written;
that test is not possible in a portable way. Instead, we
verify that .git/index is rewritten *only* when `git
status` is run without `--no-optional-locks`.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mirrors commit 'bdfdaa497 ("strbuf.h: integrate api-strbuf.txt
documentation, 2015-01-16") which did the same for strbuf.h:
* API documentation uses /** */ to set it apart from other comments.
* Function names were stripped from the comments.
* Ordering of the header was adjusted to follow the one from the text
file.
* Edited some existing comments from string-list.h for consistency.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 2.14.2
Git 2.13.6
Git 2.12.5
Git 2.11.4
Git 2.10.5
cvsimport: shell-quote variable used in backticks
archimport: use safe_pipe_capture for user input
shell: drop git-cvsserver support by default
cvsserver: use safe_pipe_capture for `constant commands` as well
cvsserver: use safe_pipe_capture instead of backticks
cvsserver: move safe_pipe_capture() to the main package
The ability to exclude paths with a negative pathspec is not mentioned
in the man pages for git grep and other commands where it might be
useful.
Add an example and a pointer to the pathspec glossary entry in the man
page for git grep to help the user to discover this ability.
Add similar pointers from the git-add and git-status man pages.
Additionally,
- Add a test for the behaviour when multiple exclusions are present.
- Add a test for the ^ alias.
- Improve name of existing test.
- Improve grammar in glossary description of the exclude pathspec.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Manav Rathi <mnvrth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References to multi-word configuration variable names in our
documentation must consistently use camelCase to highlight where
the word boundaries are, even though these are treated case
insensitively.
Fix a few places that spell them in all lowercase, which makes
them harder to read.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-parse" learned "--is-shallow-repository", that is to be
used in a way similar to existing "--is-bare-repository" and
friends.
* ow/rev-parse-is-shallow-repo:
rev-parse: rev-parse: add --is-shallow-repository
Doc update.
* kd/doc-for-each-ref:
doc/for-each-ref: explicitly specify option names
doc/for-each-ref: consistently use '=' to between argument names and values
The description of `-Xours` merge option has a parenthetical note
that tells the readers that it is very different from `-s ours`,
which is correct, but the description of `-Xtheirs` that follows it
carelessly says "this is the opposite of `ours`", giving a false
impression that the readers also need to be warned that it is very
different from `-s theirs`, which in reality does not even exist.
Clarify it a bit to avoid misleading readers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With more commands (that potentially change a submodule) paying attention
to submodules as well as the recent discussion[1] on
submodule.<name>.update, let's spell out that submodule.<name>.update
is strictly to be used for configuring the "submodule update" command
and not to be obeyed by other commands.
These other commands usually have a strict meaning of what they should
do (i.e. checkout, reset, rebase, merge) as well as have their name
overlapping with the modes possible for submodule.<name>.update.
[1] https://public-inbox.org/git/4283F0B0-BC1C-4ED1-8126-7E512D84484B@gmail.com/
submodule.<name>.update was set to "none", triggering unexpected
behavior as the submodule was thought to never be touched.
However a newer version of Git taught 'git pull --rebase' to also
populate and rebase submodules if they were active.
The newer options such as submodule.active and command specific
flags would not have triggered unexpected behavior.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-read-tree manpage has a table that is meant to
be shown with its spacing exactly as it is in the source. We
mark it as a "literal paragraph" by indenting each line by
at least one space. This renders OK with asciidoc for both
the HTML and manpage versions.
But there are two problems when we render it with
asciidoctor.
The first is that some lines mix tabs and spaces. Even if
asciidoctor is correctly configured for 8-space tabs, it
seems to handle this case differently, soaking up some of
the initial literal-paragraph spaces and mis-aligning the
table text.
The second problem is that the table uses blank lines to
group rows. But as blank lines separate paragraphs in
asciidoc, this actually means that each chunk of the table
is rendered in its own pre-formatted <div> block. This
happens even with vanilla asciidoc, but there's no visible
result because the literal paragraphs aren't styled in any
special way. But with asciidoctor (or at least the styles
used on git-scm.com), literal paragraphs are styled with a
different background. This breaks the table into a visually
distracting sequence of chunks.
We can fix both by adding a literal-paragraph block
delimiter. That turns the whole table into a single block
(for both implementations) and causes asciidoctor to render
the indentation as it is in the source.
Reported-at: https://github.com/git/git-scm.com/issues/1023
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "--state-branch=<branchname>" option, the mapping from old object names
and filtered ones in ./map/ directory is stashed away in the object database,
and the one from the previous run is read to populate the ./map/ directory,
allowing for incremental updates of large trees.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-msg hook is invoked by both commit and merge now.
Reported-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git describe` uses `--match`, it matches only tags, basically
ignoring the `--all` argument even when it is specified.
Fix it by also matching branch name and $remote_name/$remote_branch_name,
for remote-tracking references, with the specified patterns. Update
documentation accordingly and add tests.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running `git fetch --unshallow` on a repo that is not in fact shallow
produces a fatal error message. Add a helper to rev-parse that scripters
can use to determine whether a repo is shallow or not.
Signed-off-by: Øystein Walle <oystwa@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and friends when multiple worktrees are used off of a
single repository did not consider the index and per-worktree refs
of other worktrees as the root for reachability traversal, making
objects that are in use only in other worktrees to be subject to
garbage collection.
* nd/prune-in-worktree:
refs.c: reindent get_submodule_ref_store()
refs.c: remove fallback-to-main-store code get_submodule_ref_store()
rev-list: expose and document --single-worktree
revision.c: --reflog add HEAD reflog from all worktrees
files-backend: make reflog iterator go through per-worktree reflog
revision.c: --all adds HEAD from all worktrees
refs: remove dead for_each_*_submodule()
refs.c: move for_each_remote_ref_submodule() to submodule.c
revision.c: use refs_for_each*() instead of for_each_*_submodule()
refs: add refs_head_ref()
refs: move submodule slash stripping code to get_submodule_ref_store
refs.c: refactor get_submodule_ref_store(), share common free block
revision.c: --indexed-objects add objects from all worktrees
revision.c: refactor add_index_objects_to_pending()
refs.c: use is_dir_sep() in resolve_gitlink_ref()
revision.h: new flag in struct rev_info wrt. worktree-related refs
Following are several fixes for duplicated words ("of of") and one
case where an extra article ("a") slipped in.
Signed-off-by: Evan Zacks <zackse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For count, sort and format, only the argument names were listed under
OPTIONS, not the option names.
Add the option names to make it clear the options exist
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The synopsis and description inconsistently add a '=' between the
argument name and it's value. Make this consistent.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-cvsserver script is old and largely unmaintained
these days. But git-shell allows untrusted users to run it
out of the box, significantly increasing its attack surface.
Let's drop it from git-shell's list of internal handlers so
that it cannot be run by default. This is not backwards
compatible. But given the age and development activity on
CVS-related parts of Git, this is likely to impact very few
users, while helping many more (i.e., anybody who runs
git-shell and had no intention of supporting CVS).
There's no configuration mechanism in git-shell for us to
add a boolean and flip it to "off". But there is a mechanism
for adding custom commands, and adding CVS support here is
fairly trivial. Let's document it to give guidance to
anybody who really is still running cvsserver.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
Doc fix.
* mg/format-ref-doc-fix:
Documentation/git-for-each-ref: clarify peeling of tags for --format
Documentation: use proper wording for ref format strings
Killing "git merge --edit" before the editor returns control left
the repository in a state with MERGE_MSG but without MERGE_HEAD,
which incorrectly tells the subsequent "git commit" that there was
a squash merge in progress. This has been fixed.
* mg/killed-merge:
merge: save merge state earlier
merge: split write_merge_state in two
merge: clarify call chain
Documentation/git-merge: explain --continue
